wireless-regdb: Add regulatory info for Namibia (NA) for 2023
PATCH 1/1 wireless-regdb: Add regulatory info for Namibia (NA) for 2023
From: Ping-Ke Shih <[email protected]>
COMMUNICATIONS REGULATORY AUTHORITY OF NAMIBIA released NOTICE IN TERMS OF THE REGULATIONS REGARDING THE SUBMISSIONS OF INTERCONNECTION AGREEMENTS AND TARIFFS on 3 April 2023 [1].
* 2400-2483.5 MHz
100 mW e.i.r.p.
* 5150-5350 MHz
200 mW mean e.i.r.p.
Restricted to indoor use
The maximum mean e.i.r.p. density shall be limited to 10 mW/MHz (ETSI [2]: 200mW (23dBm) -6 dBm to be 17 dBm; DFS 5250-5350)
* 5470-5725 MHz
250 mW e.i.r.p.
Indoor as well as outdoor use allowed.
The maximum mean e.i.r.p. density shall be limited to 50 mW/MHz (ETSI [2]: 250mW (24dBm) -6 dBm to be 18 dBm; DFS)
* 5725-5 875 MHz
PTP/PTMP: max mean e.i.r.p = 4 W
Mesh/AP-MP: max mean e.i.r.p = 2 W
(ETSI [3]: The FWA device shall have the capability to reduce the
operating mean EIRP level to a level not exceeding 24 dBm for ChS = 20 MHz and 21 dBm for ChS = 10 MHz. 24 dBm is adopted)
* 5925-6425 MHz
- 23 dBm (200mW) mean e.i.r.p
Restricted to indoor use only.
Mean e.i.r.p density for in-band emissions = 10 dBM/MHz
- 14 dBm (25) e.i.r.p mW
Very Low Power (VLP) indoor outdoor use. Maximum meand e.i.r.p. for inband emissions = 1 dBm/MHz
* 57-66 GHz
40 dBm (10W) mean e.i.r.p
23 dBm/MHz e.i.r.p. density
Indoor use only
The EN 301 893 [2] specifies reduced power limit of 23 and 27 dBm for 5150-5350 MHz and 5470-5725 MHz respectively for devices that don't implement TPC. Also reduced TPC requires being able to reduce TX power by up to 6 dB. The DFS applicable frequency range are 5250-5350 MHz and 5470-5725 MHz.
[1] https://www.cran.na/yglilidy/2023/04/GG-8060-dated-3-April-2023.pdf
[2] EN 301 893 https://www.etsi.org/deliver/etsi_en/301800_301899/301893/02.01.01_60/en_301893v020101p.pdf
[3] EN 302 502 https://www.etsi.org/deliver/etsi_en/302500_302599/302502/02.01.01_60/en_302502v020101p.pdf
--- db.txt | 11 +++++++++++ 1 file changed, 11 insertions(+)
db.txt +11 -0
@@ -1355,6 +1355,17 @@ country MY: DFS-FCC (5735 - 5835 @ 80), (1000 mW) (5925 - 6425 @ 320), (200 mW), NO-OUTDOOR +# Source: +# https://www.cran.na/yglilidy/2023/04/GG-8060-dated-3-April-2023.pdf +country NA: DFS-ETSI + (2400 - 2483.5 @ 40), (100 mW) + (5150 - 5250 @ 80), (17), AUTO-BW, NO-OUTDOOR + (5250 - 5350 @ 80), (17), DFS, AUTO-BW, NO-OUTDOOR + (5470 - 5725 @ 160), (18), DFS + (5725 - 5875 @ 80), (24) + (5925 - 6425 @ 320), (23), NO-OUTDOOR + (57000 - 66000 @ 2160), (40), NO-OUTDOOR + country NG: DFS-ETSI (2402 - 2482 @ 40), (20) (5250 - 5330 @ 80), (30), DFS
Signature · 1 line
2.25.1
Quoted 7 lines · Ping-Ke Shih
From: Ping-Ke Shih <[email protected]>
COMMUNICATIONS REGULATORY AUTHORITY OF NAMIBIA released NOTICE IN TERMS OF THE REGULATIONS REGARDING THE SUBMISSIONS OF INTERCONNECTION AGREEMENTS AND TARIFFS on 3 April 2023 [1].
Quoted 8 lines
* 2400-2483.5 MHz
100 mW e.i.r.p.* 5150-5350 MHz
200 mW mean e.i.r.p.
Restricted to indoor use
The maximum mean e.i.r.p. density shall be limited to 10 mW/MHz (ETSI [2]: 200mW (23dBm) -6 dBm to be 17 dBm; DFS 5250-5350)
EN 301 893 says for devices without TPC, the limit is lowered 3 dBm only, as you mentioned below.
I previously requested -6 dBm because that country's regulation said that "TPC is required".
Quoted 5 lines
* 5470-5725 MHz
250 mW e.i.r.p.
Indoor as well as outdoor use allowed.
The maximum mean e.i.r.p. density shall be limited to 50 mW/MHz (ETSI [2]: 250mW (24dBm) -6 dBm to be 18 dBm; DFS)
Same here, without TPC the limit is lowered by 3 dBm.
Quoted 2 lines
* 5725-5 875 MHz
^ drop the space
Quoted 5 lines
PTP/PTMP: max mean e.i.r.p = 4 W
Mesh/AP-MP: max mean e.i.r.p = 2 W
(ETSI [3]: The FWA device shall have the capability to reduce the
operating mean EIRP level to a level not exceeding 24 dBm for ChS = 20 MHz and 21 dBm for ChS = 10 MHz. 24 dBm is adopted)
Per ETSI EN 302 502, this range requires DFS.
Quoted 4 lines
* 5925-6425 MHz
- 23 dBm (200mW) mean e.i.r.p
Restricted to indoor use only.
Mean e.i.r.p density for in-band emissions = 10 dBM/MHz
Should be dBm (I know it says dBM in the doc) ^
Quoted 3 lines
- 14 dBm (25) e.i.r.p mW
Very Low Power (VLP) indoor outdoor use. Maximum meand e.i.r.p. for inband emissions = 1 dBm/MHz
^ extra d
Quoted 5 lines
* 57-66 GHz
40 dBm (10W) mean e.i.r.p
23 dBm/MHz e.i.r.p. density
Indoor use only
The rest looks good.
ChenYu
Quoted 40 lines
The EN 301 893 [2] specifies reduced power limit of 23 and 27 dBm for 5150-5350 MHz and 5470-5725 MHz respectively for devices that don't implement TPC. Also reduced TPC requires being able to reduce TX power by up to 6 dB. The DFS applicable frequency range are 5250-5350 MHz and 5470-5725 MHz.
[1] https://www.cran.na/yglilidy/2023/04/GG-8060-dated-3-April-2023.pdf
[2] EN 301 893 https://www.etsi.org/deliver/etsi_en/301800_301899/301893/02.01.01_60/en_301893v020101p.pdf
[3] EN 302 502 https://www.etsi.org/deliver/etsi_en/302500_302599/302502/02.01.01_60/en_302502v020101p.pdfSigned-off-by Ping-Ke Shih <[email protected]>--- db.txt | 11 +++++++++++ 1 file changed, 11 insertions(+)db.txt +11
-1@@ -1355,6 +1355,17 @@ country MY: DFS-FCC (5735 - 5835 @ 80), (1000 mW) (5925 - 6425 @ 320), (200 mW), NO-OUTDOOR +# Source: +# https://www.cran.na/yglilidy/2023/04/GG-8060-dated-3-April-2023.pdf +country NA: DFS-ETSI + (2400 - 2483.5 @ 40), (100 mW) + (5150 - 5250 @ 80), (17), AUTO-BW, NO-OUTDOOR + (5250 - 5350 @ 80), (17), DFS, AUTO-BW, NO-OUTDOOR + (5470 - 5725 @ 160), (18), DFS + (5725 - 5875 @ 80), (24) + (5925 - 6425 @ 320), (23), NO-OUTDOOR + (57000 - 66000 @ 2160), (40), NO-OUTDOOR + country NG: DFS-ETSI (2402 - 2482 @ 40), (20) (5250 - 5330 @ 80), (30), DFS --2.25.1