rteval: Added functionality to allow user to set the cstate of specified cpus when running rteval
PATCH v3 1/1 rteval: Added functionality to allow user to set the cstate of specified cpus when running rteval
We would like to be able to set the cstates of CPUs while running rteval.
This patch adds the file cpupower.py and options '--idle-set' and '--cpulist' within rteval to use cpupower.
cpupower.py provides the infrastructure to interface with the cpupower command, and the options in rteval-cmd let the user specify the cstate to be set and the CPUs to set it on.
Signed-off-by Anubhav Shelat <[email protected]>
--- rteval-cmd | 25 ++++++++++++- rteval/cpupower.py | 91 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 115 insertions(+), 1 deletion(-) create mode 100644 rteval/cpupower.py
rteval-cmd +24 -1
@@ -29,6 +29,7 @@ from rteval.Log import Log from rteval import RtEval, rtevalConfig from rteval.modules.loads import LoadModules from rteval.modules.measurement import MeasurementModules +from rteval import cpupower from rteval.version import RTEVAL_VERSION from rteval.systopology import SysTopology, parse_cpulist_from_config from rteval.modules.loads.kcompile import ModuleParameters
@@ -146,7 +147,11 @@ def parse_options(cfg, parser, cmdargs): parser.add_argument("-S", "--source-download", nargs="*", dest="rteval___srcdownload", type=str, default=None, metavar="KERNEL_VERSION", help='download a source kernel from kernel.org and exit') - + parser.add_argument("-c", "--cpulist", dest="rteval___cpulist", metavar="CPULIST", + default=str([i for i in range(os.cpu_count())]).strip('[]'), + help='specify list of cpus whose idle state to modify') + parser.add_argument('--idle-set', dest='rteval___cstate', metavar='CSTATE', + default=None, help='cstate to enable for this rteval run') if not cmdargs: cmdargs = ["--help"]
@@ -169,6 +174,12 @@ def parse_options(cfg, parser, cmdargs): cmd_args = cmdargs[ind+1:] cmdargs = cmdargs[:ind+1] + # if --cpulist is specified, make sure --idle-set is too + if ((sys.argv.count('-c')+sys.argv.count('--cpulist')) > 0) and \ + (sys.argv.count('--idle-set') == 0): + print('--cpulist must be used with --idle-set') + cmdargs = ["--help"] + cmd_opts = parser.parse_args(args=cmdargs) # if no kernel version was provided for --source-download, set version to default
@@ -263,6 +274,9 @@ if __name__ == '__main__': | (rtevcfg.debugging and Log.DEBUG) logger.SetLogVerbosity(loglev) + # check if cpupower is being used + if sys.argv.count('--idle-set') > 0: + rtevcfg.update({'usingCpupower': True}) # Load modules loadmods = LoadModules(config, logger=logger) measuremods = MeasurementModules(config, logger=logger)
@@ -394,6 +408,11 @@ if __name__ == '__main__': if not os.path.isdir(rtevcfg.workdir): raise RuntimeError(f"work directory {rtevcfg.workdir} does not exist") + # if idle-set has been specified, enable idlestate in rtecfg.cpulist + cpupower_controller = None + if rtevcfg.cstate: + cpupower_controller = cpupower.Cpupower(rtevcfg.cpulist, rtevcfg.cstate) + cpupower_controller.enable_idle_state() rteval = RtEval(config, loadmods, measuremods, logger) rteval.Prepare(rtevcfg.onlyload)
@@ -413,6 +432,10 @@ if __name__ == '__main__': ec = rteval.Measure() logger.log(Log.DEBUG, f"exiting with exit code: {ec}") + # reset idlestate + if rtevcfg.cstate: + cpupower_controller.restore_cstate() + sys.exit(ec) except KeyboardInterrupt: sys.exit(0)
rteval/cpupower.py new file +91 -0
91 lines not on this page · raw message
Signature · 1 line
2.45.2