arm64: dts: qcom: x1e80100: PCIe fixes and CRD modem support

index f97c80b4077c..6aa2ec1e7919 100644
@@ -788,7 +788,7 @@ &pcie4 {
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-phy-supply = <&vreg_l3i_0p8>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
 
 	status = "okay";

index c7aec564a318..07e00f1d1768 100644
@@ -2916,7 +2916,7 @@ pcie6a: pci@1bf8000 {
 
 			dma-coherent;
 
-			linux,pci-domain = <7>;
+			linux,pci-domain = <6>;
 			num-lanes = <2>;
 
 			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,

@@ -3037,7 +3037,7 @@ pcie4: pci@1c08000 {
 
 			dma-coherent;
 
-			linux,pci-domain = <5>;
+			linux,pci-domain = <4>;
 			num-lanes = <2>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,

index 07e00f1d1768..2c10532d4f60 100644
@@ -2974,6 +2974,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 				      "link_down";
 
 			power-domains = <&gcc GCC_PCIE_6A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie6a_phy>;
 			phy-names = "pciephy";

@@ -3095,6 +3096,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 				      "link_down";
 
 			power-domains = <&gcc GCC_PCIE_4_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie4_phy>;
 			phy-names = "pciephy";

index 6aa2ec1e7919..41d05ce01cbb 100644
@@ -975,7 +975,7 @@ nvme_reg_en: nvme-reg-en-state {
 		bias-disable;
 	};
 
-	pcie6a_default: pcie2a-default-state {
+	pcie6a_default: pcie6a-default-state {
 		clkreq-n-pins {
 			pins = "gpio153";
 			function = "pcie6a_clk";

@@ -991,11 +991,11 @@ perst-n-pins {
 		};
 
 		wake-n-pins {
-		       pins = "gpio154";
-		       function = "gpio";
-		       drive-strength = <2>;
-		       bias-pull-up;
-	       };
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
 	};
 
 	tpad_default: tpad-default-state {

index 41d05ce01cbb..7406f1ad9c55 100644
@@ -987,7 +987,7 @@ perst-n-pins {
 			pins = "gpio152";
 			function = "gpio";
 			drive-strength = <2>;
-			bias-pull-down;
+			bias-disable;
 		};
 
 		wake-n-pins {

index 7406f1ad9c55..caae0c3d8c7a 100644
@@ -784,6 +784,12 @@ &mdss_dp3_phy {
 };
 
 &pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 

@@ -975,6 +981,29 @@ nvme_reg_en: nvme-reg-en-state {
 		bias-disable;
 	};
 
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie6a_default: pcie6a-default-state {
 		clkreq-n-pins {
 			pins = "gpio153";

index 2c10532d4f60..2e2b50acfcca 100644
@@ -760,7 +760,7 @@ gcc: clock-controller@100000 {
 				 <&sleep_clk>,
 				 <0>,
 				 <&pcie4_phy>,
-				 <0>,
+				 <&pcie5_phy>,
 				 <&pcie6a_phy>,
 				 <0>,
 				 <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,

@@ -3015,6 +3015,126 @@ pcie6a_phy: phy@1bfc000 {
 			status = "disabled";
 		};
 
+		pcie5: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x7e000000 0 0xf1d>,
+			      <0 0x7e000f40 0 0xa8>,
+			      <0 0x7e001000 0 0x1000>,
+			      <0 0x7e100000 0 0x100000>,
+			      <0 0x01c03000 0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x7e200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x7e300000 0x0 0x7e300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <5>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 71 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 72 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 73 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
+				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_5_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_5_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_5_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+				 <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_south_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_5_BCR>,
+				 <&gcc GCC_PCIE_5_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_5_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			phys = <&pcie5_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie5_phy: phy@1c06000 {
+			compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
+				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_5_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_5_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_5_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie5_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pcie4: pci@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-x1e80100";

index caae0c3d8c7a..767118831551 100644
@@ -301,6 +301,22 @@ vreg_nvme: regulator-nvme {
 		pinctrl-names = "default";
 		pinctrl-0 = <&nvme_reg_en>;
 	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
 };
 
 &apps_rsc {

@@ -800,6 +816,25 @@ &pcie4_phy {
 	status = "okay";
 };
 
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;

@@ -1004,6 +1039,29 @@ wake-n-pins {
 		};
 	};
 
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie6a_default: pcie6a-default-state {
 		clkreq-n-pins {
 			pins = "gpio153";

@@ -1055,6 +1113,13 @@ wcd_default: wcd-reset-n-active-state {
 		bias-disable;
 		output-low;
 	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
 };
 
 &uart21 {