mm, memcg: cg2 memory{.swap,}.peak write handlers
Subsystems (6)
PATCH v6 1/1 mm, memcg: cg2 memory{.swap,}.peak write handlers
This is an updated patchset rebasing onto -torvalds master (post 6.11-rc1), and addressing comments from Michal and Tejun.
As requested by Tejun and Johannes, I've removed the explicit check for the string "reset", so it now allows any non-empty string. (Empty strings get filtered before our write handler executes)
I've also made several of the field reads and writes atomic with {READ,WRITE}_ONCE, and adjusted more of the types to be unsigned.
Documentation/admin-guide/cgroup-v2.rst | 22 ++-- include/linux/cgroup-defs.h | 5 + include/linux/cgroup.h | 3 + include/linux/memcontrol.h | 5 + include/linux/page_counter.h | 11 +- kernel/cgroup/cgroup-internal.h | 2 + kernel/cgroup/cgroup.c | 7 + mm/memcontrol.c | 116 +++++++++++++++-- mm/page_counter.c | 30 +++-- tools/testing/selftests/cgroup/cgroup_util.c | 22 ++++ tools/testing/selftests/cgroup/cgroup_util.h | 2 + tools/testing/selftests/cgroup/test_memcontrol.c | 229 +++++++++++++++++++++++++++++++-- 12 files changed, 419 insertions(+), 35 deletions(-)
PATCH v6 1/2 mm, memcg: cg2 memory{.swap,}.peak write handlers
Other mechanisms for querying the peak memory usage of either a process or v1 memory cgroup allow for resetting the high watermark. Restore parity with those mechanisms, but with a less racy API.
For example:
- Any write to memory.max_usage_in_bytes in a cgroup v1 mount resets the high watermark.
- writing "5" to the clear_refs pseudo-file in a processes's proc directory resets the peak RSS.
This change is an evolution of a previous patch, which mostly copied the cgroup v1 behavior, however, there were concerns about races/ownership issues with a global reset, so instead this change makes the reset filedescriptor-local.
Writing any non-empty string to the memory.peak and memory.swap.peak pseudo-files reset the high watermark to the current usage for subsequent reads through that same FD.
Notably, following Johannes's suggestion, this implementation moves the O(FDs that have written) behavior onto the FD write(2) path. Instead, on the page-allocation path, we simply add one additional watermark to conditionally bump per-hierarchy level in the page-counter.
Additionally, this takes Longman's suggestion of nesting the page-charging-path checks for the two watermarks to reduce the number of common-case comparisons.
This behavior is particularly useful for work scheduling systems that need to track memory usage of worker processes/cgroups per-work-item. Since memory can't be squeezed like CPU can (the OOM-killer has opinions), these systems need to track the peak memory usage to compute system/container fullness when binpacking workitems.
Most notably, Vimeo's use-case involves a system that's doing global binpacking across many Kubernetes pods/containers, and while we can use PSI for some local decisions about overload, we strive to avoid packing workloads too tightly in the first place. To facilitate this, we track the peak memory usage. However, since we run with long-lived workers (to amortize startup costs) we need a way to track the high watermark while a work-item is executing. Polling runs the risk of missing short spikes that last for timescales below the polling interval, and peak memory tracking at the cgroup level is otherwise perfect for this use-case.
As this data is used to ensure that binpacked work ends up with sufficient headroom, this use-case mostly avoids the inaccuracies surrounding reclaimable memory.
--- Documentation/admin-guide/cgroup-v2.rst | 22 +++-- include/linux/cgroup-defs.h | 5 + include/linux/cgroup.h | 3 + include/linux/memcontrol.h | 5 + include/linux/page_counter.h | 11 ++- kernel/cgroup/cgroup-internal.h | 2 + kernel/cgroup/cgroup.c | 7 ++ mm/memcontrol.c | 116 ++++++++++++++++++++++-- mm/page_counter.c | 30 ++++-- 9 files changed, 174 insertions(+), 27 deletions(-)
Documentation/admin-guide/cgroup-v2.rst +14 -8
@@ -1333,11 +1333,14 @@ The following nested keys are defined. all the existing limitations and potential future extensions. memory.peak - A read-only single value file which exists on non-root - cgroups. + A read-write single value file which exists on non-root cgroups. + + The max memory usage recorded for the cgroup and its descendants since + either the creation of the cgroup or the most recent reset for that FD. - The max memory usage recorded for the cgroup and its - descendants since the creation of the cgroup. + A write of any non-empty string to this file resets it to the + current memory usage for subsequent reads through the same + file descriptor. memory.oom.group A read-write single value file which exists on non-root
@@ -1663,11 +1666,14 @@ The following nested keys are defined. Healthy workloads are not expected to reach this limit. memory.swap.peak - A read-only single value file which exists on non-root - cgroups. + A read-write single value file which exists on non-root cgroups. + + The max swap usage recorded for the cgroup and its descendants since + the creation of the cgroup or the most recent reset for that FD. - The max swap usage recorded for the cgroup and its - descendants since the creation of the cgroup. + A write of any non-empty string to this file resets it to the + current memory usage for subsequent reads through the same + file descriptor. memory.swap.max A read-write single value file which exists on non-root
include/linux/cgroup-defs.h +5 -0
@@ -775,6 +775,11 @@ struct cgroup_subsys {extern struct percpu_rw_semaphore cgroup_threadgroup_rwsem; +struct cgroup_of_peak { +unsigned long value; +struct list_head list; +}; +/** * cgroup_threadgroup_change_begin - threadgroup exclusion for cgroups * @tsk: target task
include/linux/cgroup.h +3 -0
@@ -11,6 +11,7 @@#include <linux/sched.h> #include <linux/nodemask.h> +#include <linux/list.h> #include <linux/rculist.h> #include <linux/cgroupstats.h> #include <linux/fs.h>
@@ -854,4 +855,6 @@ static inline void cgroup_bpf_put(struct cgroup *cgrp) {}struct cgroup *task_get_cgroup1 (struct task_struct *tsk,int hierarchy_id); +struct cgroup_of_peak *of_peak (struct kernfs_open_file *of); +#endif /* _LINUX_CGROUP_H */
include/linux/memcontrol.h +5 -0
@@ -193,6 +193,11 @@ struct mem_cgroup {struct page_counter memsw;/* v1 only */ }; +/* registered local peak watchers */ +struct list_head memory_peaks; +struct list_head swap_peaks; +spinlock_t peaks_lock; +/* Range enforcement for interrupt charges */ struct work_struct high_work;
include/linux/page_counter.h +10 -1
@@ -26,6 +26,8 @@ struct page_counter {atomic_long_t children_low_usage;unsigned long watermark; +/* Latest cg2 reset watermark */ +unsigned long local_watermark;unsigned long failcnt;/* Keep all the read most fields in a separete cacheline. */
@@ -78,7 +80,14 @@ int page_counter_memparse(const char *buf, const char *max,static inline void page_counter_reset_watermark (struct page_counter *counter) { - counter->watermark =page_counter_read (counter); +unsigned long usage =page_counter_read (counter); + +/* +* Update local_watermark first, so it's always <= watermark +* (modulo CPU/compiler re-ordering) +*/ + counter->local_watermark = usage; + counter->watermark = usage; } void page_counter_calculate_protection(struct page_counter *root,
kernel/cgroup/cgroup-internal.h +2 -0
@@ -81,6 +81,8 @@ struct cgroup_file_ctx {struct {struct cgroup_pidlist *pidlist; } procs1; + +struct cgroup_of_peak peak; };/*
kernel/cgroup/cgroup.c +7 -0
@@ -1972,6 +1972,13 @@ static int cgroup2_parse_param(struct fs_context *fc, struct fs_parameter *paramreturn -EINVAL ; } +struct cgroup_of_peak *of_peak (struct kernfs_open_file *of) +{ +struct cgroup_file_ctx *ctx = of->priv; + +return &ctx->peak; +} +static void apply_cgroup_root_flags (unsigned int root_flags) {if (current->nsproxy->cgroup_ns == &init_cgroup_ns) {
mm/memcontrol.c +106 -10
164 lines not on this page · raw message
mm/page_counter.c +22 -8
@@ -79,9 +79,22 @@ void page_counter_charge(struct page_counter *counter, unsigned long nr_pages)/* * This is indeed racy, but we can live with some * inaccuracy in the watermark. +* +* Notably, we have two watermarks to allow for both a globally +* visible peak and one that can be reset at a smaller scope. +* +* Since we reset both watermarks when the global reset occurs, +* we can guarantee that watermark >= local_watermark, so we +* don't need to do both comparisons every time. +* +* On systems with branch predictors, the inner condition should +* be almost free. */ -if (new >READ_ONCE (c->watermark)) -WRITE_ONCE (c->watermark, new); +if (new >READ_ONCE (c->local_watermark)) { +WRITE_ONCE (c->local_watermark, new); +if (new >READ_ONCE (c->watermark)) +WRITE_ONCE (c->watermark, new); + } } }
@@ -129,12 +142,13 @@ bool page_counter_try_charge(struct page_counter *counter, goto failed; }propagate_protected_usage (c, new); -/* -* Just like with failcnt, we can live with some -* inaccuracy in the watermark. -*/ -if (new >READ_ONCE (c->watermark)) -WRITE_ONCE (c->watermark, new); + +/* see comment on page_counter_charge */ +if (new >READ_ONCE (c->local_watermark)) { +WRITE_ONCE (c->local_watermark, new); +if (new >READ_ONCE (c->watermark)) +WRITE_ONCE (c->watermark, new); + } }return true;
Signature · 1 line
2.40.1
Quoted 44 lines · David Finkel
Other mechanisms for querying the peak memory usage of either a process or v1 memory cgroup allow for resetting the high watermark. Restore parity with those mechanisms, but with a less racy API.
For example:
- Any write to memory.max_usage_in_bytes in a cgroup v1 mount resets the high watermark.
- writing "5" to theclear_refspseudo-file in a processes's proc directory resets the peak RSS.This change is an evolution of a previous patch, which mostly copied the cgroup v1 behavior, however, there were concerns about races/ownership issues with a global reset, so instead this change makes the reset filedescriptor-local.
Writing any non-empty string to the memory.peak and memory.swap.peak pseudo-files reset the high watermark to the current usage for subsequent reads through that same FD.
Notably, following Johannes's suggestion, this implementation moves the O(FDs that have written) behavior onto the FD write(2) path. Instead, on the page-allocation path, we simply add one additional watermark to conditionally bump per-hierarchy level in the page-counter.
Additionally, this takes Longman's suggestion of nesting the page-charging-path checks for the two watermarks to reduce the number of common-case comparisons.
This behavior is particularly useful for work scheduling systems that need to track memory usage of worker processes/cgroups per-work-item. Since memory can't be squeezed like CPU can (the OOM-killer has opinions), these systems need to track the peak memory usage to compute system/container fullness when binpacking workitems.
Most notably, Vimeo's use-case involves a system that's doing global binpacking across many Kubernetes pods/containers, and while we can use PSI for some local decisions about overload, we strive to avoid packing workloads too tightly in the first place. To facilitate this, we track the peak memory usage. However, since we run with long-lived workers (to amortize startup costs) we need a way to track the high watermark while a work-item is executing. Polling runs the risk of missing short spikes that last for timescales below the polling interval, and peak memory tracking at the cgroup level is otherwise perfect for this use-case.
Quoted 7 lines
As this data is used to ensure that binpacked work ends up with sufficient headroom, this use-case mostly avoids the inaccuracies surrounding reclaimable memory.
Suggested-by Johannes Weiner <[email protected]>Suggested-by Waiman Long <[email protected]>Signed-off-by David Finkel <[email protected]>
Quoted 11 lines · David Finkel
...
Documentation/admin-guide/cgroup-v2.rst | 22 +++-- include/linux/cgroup-defs.h | 5 + include/linux/cgroup.h | 3 + include/linux/memcontrol.h | 5 + include/linux/page_counter.h | 11 ++- kernel/cgroup/cgroup-internal.h | 2 + kernel/cgroup/cgroup.c | 7 ++ mm/memcontrol.c | 116 ++++++++++++++++++++++-- mm/page_counter.c | 30 ++++-- 9 files changed, 174 insertions(+), 27 deletions(-)
Thanks for the fixups, you can add
(I believe the test failure in the other thread is unrelated.)
PATCH v6 2/2 mm, memcg: cg2 memory{.swap,}.peak write tests
In reply to David FinkelExtend two existing tests to cover extracting memory usage through the newly mutable memory.peak and memory.swap.peak handlers.
In particular, make sure to exercise adding and removing watchers with overlapping lifetimes so the less-trivial logic gets tested.
--- tools/testing/selftests/cgroup/cgroup_util.c | 22 ++ tools/testing/selftests/cgroup/cgroup_util.h | 2 + .../selftests/cgroup/test_memcontrol.c | 229 +++++++++++++++++- 3 files changed, 245 insertions(+), 8 deletions(-)
tools/testing/selftests/cgroup/cgroup_util.c +22 -0
@@ -141,6 +141,16 @@ long cg_read_long(const char *cgroup, const char *control)return atol (buf); } +long cg_read_long_fd (int fd) +{ +char buf[128 ]; + +if (pread (fd, buf,sizeof (buf),0 ) <=0 ) +return -1 ; + +return atol (buf); +} +long cg_read_key_long (const char *cgroup,const char *control,const char *key) {char buf[PAGE_SIZE ];
@@ -183,6 +193,18 @@ int cg_write(const char *cgroup, const char *control, char *buf)return ret == len ?0 : ret; } +/* +* Returns fd on success, or -1 on failure. +* (fd should be closed with close() as usual) +*/ +int cg_open (const char *cgroup,const char *control,int flags) +{ +char path[PATH_MAX ]; + +snprintf (path,sizeof (path),"%s/%s" , cgroup, control); +return open (path, flags); +} +int cg_write_numeric (const char *cgroup,const char *control,long value) {char buf[64 ];
tools/testing/selftests/cgroup/cgroup_util.h +2 -0
@@ -34,9 +34,11 @@ extern int cg_read_strcmp(const char *cgroup, const char *control,extern int cg_read_strstr (const char *cgroup,const char *control,const char *needle);extern long cg_read_long (const char *cgroup,const char *control); +extern long cg_read_long_fd (int fd);long cg_read_key_long (const char *cgroup,const char *control,const char *key);extern long cg_read_lc (const char *cgroup,const char *control);extern int cg_write (const char *cgroup,const char *control,char *buf); +extern int cg_open (const char *cgroup,const char *control,int flags);int cg_write_numeric (const char *cgroup,const char *control,long value); extern int cg_run(const char *cgroup, int (*fn)(const char *cgroup, void *arg),
tools/testing/selftests/cgroup/test_memcontrol.c +221 -8
297 lines not on this page · raw message
Signature · 1 line
2.40.1
Michal Koutný
maintainerRe: [PATCH v6 2/2] mm, memcg: cg2 memory{.swap,}.peak write tests
Hello.
Quoted 2 lines · David Finkel
Extend two existing tests to cover extracting memory usage through the newly mutable memory.peak and memory.swap.peak handlers.
BTW do the tests pass for you?
I gave it a try (v6.11-rc1+your patches)
$ grep "not ok 2" -B30 test.strace
...
315 15:19:13.990351 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315 15:19:13.994457 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315 15:19:13.998562 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315 15:19:13.998652 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315 15:19:14.002759 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315 15:19:14.006864 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.current", O_RDONLY) = 7
315 15:19:14.006989 read(7, "270336\n", 127) = 7
315 15:19:14.011114 close(7) = 0
315 15:19:14.015262 close(6) = 0
315 15:19:14.015448 exit_group(-1) = ?
315 15:19:14.019753 +++ exited with 255 +++
313 15:19:14.019820 <... wait4 resumed>[{WIFEXITED(s) && WEXITSTATUS(s) == 255}], 0, NULL) = 315
313 15:19:14.019878 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=315, si_uid=0, si_status=255, si_utime=1 /* 0.01 s */, -
313 15:19:14.019926 close(3) = 0
313 15:19:14.020001 close(5) = 0
313 15:19:14.020072 close(4) = 0
313 15:19:14.024173 rmdir("/sys/fs/cgroup/memcg_test") = 0
313 15:19:14.028517 write(1, "not ok 2 test_memcg_current_peak"..., 33) = 33grep "^315 .*read.*4096" -c test.strace
12800
Hopefully, unrelated to your changes. I ran this within initrd (rapido image) so it may be an issue how rootfs pagecache is undercharged (due to sharing?), instead of 50M, there's only ~256k.
To verify, I also tried with memory.peak patch reverted, failing differently:
...
238 15:30:29.034623 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.current", O_RDONLY) = 3
238 15:30:29.034766 read(3, "52801536\n", 127) = 9
238 15:30:29.038895 close(3) = 0
238 15:30:29.043048 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.stat", O_RDONLY) = 3
238 15:30:29.043230 read(3, "anon 52436992\nfile 0\nkernel 1105"..., 4095) = 870
238 15:30:29.047379 close(3) = 0
238 15:30:29.051491 munmap(0x7f2473600000, 52432896) = 0
238 15:30:29.058516 exit_group(0) = ?
238 15:30:29.062992 +++ exited with 0 +++
237 15:30:29.067054 <... wait4 resumed>[{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 238
237 15:30:29.067136 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=238, si_uid=0, si_status=0, si_utime=1 /* 0.01 s */, si-
237 15:30:29.067210 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDONLY) = 3
237 15:30:29.071349 read(3, "52805632\n", 127) = 9
237 15:30:29.075470 close(3) = 0
237 15:30:29.075562 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 3
237 15:30:29.079712 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 4
237 15:30:29.083848 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 5
237 15:30:29.083970 write(3, "reset\n\0", 7) = -1 EINVAL (Invalid argument)
237 15:30:29.088095 close(3) = 0
237 15:30:29.092209 close(4) = 0
237 15:30:29.092295 close(5) = 0
237 15:30:29.096398 close(-1) = -1 EBADF (Bad file descriptor)
237 15:30:29.100497 rmdir("/sys/fs/cgroup/memcg_test") = 0
237 15:30:29.100760 write(1, "not ok 2 test_memcg_current_peak"..., 33) = 33This failure makes sense but it reminded me --
could you please modify the test so that it checks write permission of memory.peak and skips the reset testing on old(er) kernels? That'd be in accordance with other cgroup selftest that maintain partial backwards compatibility when possible.
Thanks,
Michal
Re: [PATCH v6 2/2] mm, memcg: cg2 memory{.swap,}.peak write tests
Thanks for checking!
Quoted 8 lines · Michal Koutný
Hello.
Quoted 2 lines · David Finkel
Extend two existing tests to cover extracting memory usage through the newly mutable memory.peak and memory.swap.peak handlers.
BTW do the tests pass for you?
Yeah, my tests pass when running on top of an ext2 mount. At least one of the existing tests failed when running out of tmpfs, so I've been testing with an ext2 mount in UML.
Quoted 61 lines
I gave it a try (v6.11-rc1+your patches)
$ grep "not ok 2" -B30 test.strace...
315 15:19:13.990351 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096 315 15:19:13.994457 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096 315 15:19:13.998562 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096 315 15:19:13.998652 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096 315 15:19:14.002759 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096 315 15:19:14.006864 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.current", O_RDONLY) = 7 315 15:19:14.006989 read(7, "270336\n", 127) = 7 315 15:19:14.011114 close(7) = 0 315 15:19:14.015262 close(6) = 0 315 15:19:14.015448 exit_group(-1) = ? 315 15:19:14.019753 +++ exited with 255 +++ 313 15:19:14.019820 <... wait4 resumed>[{WIFEXITED(s) && WEXITSTATUS(s) == 255}], 0, NULL) = 315 313 15:19:14.019878 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=315, si_uid=0, si_status=255, si_utime=1 /* 0.01 s */, - 313 15:19:14.019926 close(3) = 0 313 15:19:14.020001 close(5) = 0 313 15:19:14.020072 close(4) = 0 313 15:19:14.024173 rmdir("/sys/fs/cgroup/memcg_test") = 0 313 15:19:14.028517 write(1, "not ok 2 test_memcg_current_peak"..., 33) = 33grep "^315 .*read.*4096" -c test.strace
12800Hopefully, unrelated to your changes. I ran this within initrd (rapido image) so it may be an issue how rootfs pagecache is undercharged (due to sharing?), instead of 50M, there's only ~256k.
To verify, I also tried with memory.peak patch reverted, failing differently:
...
238 15:30:29.034623 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.current", O_RDONLY) = 3 238 15:30:29.034766 read(3, "52801536\n", 127) = 9 238 15:30:29.038895 close(3) = 0 238 15:30:29.043048 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.stat", O_RDONLY) = 3 238 15:30:29.043230 read(3, "anon 52436992\nfile 0\nkernel 1105"..., 4095) = 870 238 15:30:29.047379 close(3) = 0 238 15:30:29.051491 munmap(0x7f2473600000, 52432896) = 0 238 15:30:29.058516 exit_group(0) = ? 238 15:30:29.062992 +++ exited with 0 +++ 237 15:30:29.067054 <... wait4 resumed>[{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 238 237 15:30:29.067136 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=238, si_uid=0, si_status=0, si_utime=1 /* 0.01 s */, si- 237 15:30:29.067210 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDONLY) = 3 237 15:30:29.071349 read(3, "52805632\n", 127) = 9 237 15:30:29.075470 close(3) = 0 237 15:30:29.075562 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 3 237 15:30:29.079712 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 4 237 15:30:29.083848 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 5 237 15:30:29.083970 write(3, "reset\n\0", 7) = -1 EINVAL (Invalid argument) 237 15:30:29.088095 close(3) = 0 237 15:30:29.092209 close(4) = 0 237 15:30:29.092295 close(5) = 0 237 15:30:29.096398 close(-1) = -1 EBADF (Bad file descriptor) 237 15:30:29.100497 rmdir("/sys/fs/cgroup/memcg_test") = 0 237 15:30:29.100760 write(1, "not ok 2 test_memcg_current_peak"..., 33) = 33
Quoted 5 lines
This failure makes sense but it reminded me --
could you please modify the test so that it checks write permission of memory.peak and skips the reset testing on old(er) kernels? That'd be in accordance with other cgroup selftest that maintain partial backwards compatibility when possible.
Sure, I'll add that to the tests in a bit.
Quoted 3 lines
Thanks,
Michal
Signature · 2 lines
David Finkel Senior Principal Software Engineer, Core Services