Skip to contentSkip to conversation

Fixed minor kernel test bot error

PATCH Superseded Abhash Jha 1 participant 4 messages Jul 30, 2024

Subsystems (2)

v4 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Abhash Jha

author
#0 lore raw

v4 cover Fixed minor kernel test bot error

Hello,

The first patch in the series adds support for configuring the gain and resolution(integration time) of the ltr390 sensor by writing to the respective registers. Then the available values for gain and resolution that are listed in the datasheet are provided via the read_avail callback.

The second patch adds a new channel for the ALS feature of the sensor. The same configuration of gain and resolution has to be provided for this channel as well. As there are two IIO channels now, we would need to switch the sensor's mode of operation depending on which sensor is being accessed. Hence, mode switching is also provided.

Then the third patch adds support for calculating counts_per_uvi based on the current gain and resolution value.

Changes in v4:
- Added "bitfield.h" include to fix -Wimplicit-function-declaration.

Changes in v3:
- Added cover letter to the patch series.
- Fixed indentation in the patch description.
- Patch specific changes are listed below.

[PATCH v3 1/3]
- Cleaned up the spurious changes made in v2.
- ltr390_set_int_time and ltr390_set_gain now return -EINVAL to
indicate no match.

[PATCH v3 2/3]
- Used enum ltr390_mode inside the ltr390_data struct.
- Refactored ltr390_set_mode function according to the comments in v2.

[PATCH v3 3/3]
- Simplified the formula for counts_per_uvi calculation.
- Removed spurious whitespace changes introduced in v2.

- Link to v2: https://lore.kernel.org/linux-iio/[email protected]/

Changes in v2:
- Split the single patch into 3 patches.
- Used FIELD_PREP to perform bit shifting.
- Used enum for mode selection instead of defines.
- Fixed indentation and whitespace issues pointed out in the comments
- Replaced mutex_lock(&data->lock) with guard(mutex)(&data->lock)
- Provided available values for gain and resolution via read_avail instead of sysfs attributes.
- Refactored ltr390_set_gain and ltr390_set_int_time.
- Used early returns instead of single exit points.

- Link to v1: https://lore.kernel.org/linux-iio/[email protected]/

Abhash Jha (3):
iio: light: ltr390: Add configurable gain and resolution
iio: light: ltr390: Add ALS channel and support for gain and
resolution
iio: light: ltr390: Calculate 'counts_per_uvi' dynamically

 drivers/iio/light/ltr390.c | 247 +++++++++++++++++++++++++++++++++----
 1 file changed, 226 insertions(+), 21 deletions(-)
Signature · 1 line
2.43.0
author
#1 lore raw

PATCH v4 1/3 iio: light: ltr390: Add configurable gain and resolution

Add support for configuring and reading the gain and resolution (integration time). Also provide the available values for gain and resoltion respectively via read_avail callback.

---
 drivers/iio/light/ltr390.c | 136 ++++++++++++++++++++++++++++++++++---
 1 file changed, 125 insertions(+), 11 deletions(-)
drivers/iio/light/ltr390.c +125 -11
index fff1e8990..ee3d30075 100644
@@ -23,21 +23,29 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/regmap.h>
+#include <linux/bitfield.h>
 
 #include <linux/iio/iio.h>
 
 #include <asm/unaligned.h>
 
-#define LTR390_MAIN_CTRL      0x00
-#define LTR390_PART_ID	      0x06
-#define LTR390_UVS_DATA	      0x10
+#define LTR390_MAIN_CTRL		0x00
+#define LTR390_ALS_UVS_MEAS_RATE	0x04
+#define LTR390_ALS_UVS_GAIN		0x05
+#define LTR390_PART_ID			0x06
+#define LTR390_ALS_DATA			0x0D
+#define LTR390_UVS_DATA			0x10
+#define LTR390_INT_CFG			0x19
+
+#define LTR390_PART_NUMBER_ID		0xb
+#define LTR390_ALS_UVS_GAIN_MASK	0x07
+#define LTR390_ALS_UVS_INT_TIME_MASK	0x70
+#define LTR390_ALS_UVS_INT_TIME(x)	FIELD_PREP(LTR390_ALS_UVS_INT_TIME_MASK, (x))
 
 #define LTR390_SW_RESET	      BIT(4)
 #define LTR390_UVS_MODE	      BIT(3)
 #define LTR390_SENSOR_ENABLE  BIT(1)
 
-#define LTR390_PART_NUMBER_ID 0xb
-
 /*
  * At 20-bit resolution (integration time: 400ms) and 18x gain, 2300 counts of
  * the sensor are equal to 1 UV Index [Datasheet Page#8].
@@ -60,6 +68,8 @@ struct ltr390_data {
 	struct i2c_client *client;
 	/* Protects device from simulataneous reads */
 	struct mutex lock;
+	int gain;
+	int int_time_us;
 };
 
 static const struct regmap_config ltr390_regmap_config = {
@@ -75,8 +85,6 @@ static int ltr390_register_read(struct ltr390_data *data, u8 register_address)
 	int ret;
 	u8 recieve_buffer[3];
 
-	guard(mutex)(&data->lock);
-
 	ret = regmap_bulk_read(data->regmap, register_address, recieve_buffer,
 			       sizeof(recieve_buffer));
 	if (ret) {
@@ -94,6 +102,7 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 	int ret;
 	struct ltr390_data *data = iio_priv(iio_device);
 
+	guard(mutex)(&data->lock);
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		ret = ltr390_register_read(data, LTR390_UVS_DATA);
@@ -105,18 +114,118 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 		*val = LTR390_WINDOW_FACTOR;
 		*val2 = LTR390_COUNTS_PER_UVI;
 		return IIO_VAL_FRACTIONAL;
+
+	case IIO_CHAN_INFO_INT_TIME:
+		*val = data->int_time_us;
+		return IIO_VAL_INT;
+
 	default:
 		return -EINVAL;
 	}
 }
 
-static const struct iio_info ltr390_info = {
-	.read_raw = ltr390_read_raw,
-};
+/* integration time in us */
+static const int ltr390_int_time_map_us[] = { 400000, 200000, 100000, 50000, 25000, 12500 };
+static const int ltr390_gain_map[] = { 1, 3, 6, 9, 18 };
 
 static const struct iio_chan_spec ltr390_channel = {
 	.type = IIO_UVINDEX,
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+	.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
+};
+
+static int ltr390_set_gain(struct ltr390_data *data, int val)
+{
+	int ret, idx;
+
+	for (idx = 0; idx < ARRAY_SIZE(ltr390_gain_map); idx++) {
+		if (ltr390_gain_map[idx] != val)
+			continue;
+
+		guard(mutex)(&data->lock);
+		ret = regmap_update_bits(data->regmap,
+					LTR390_ALS_UVS_GAIN,
+					LTR390_ALS_UVS_GAIN_MASK, idx);
+		if (ret)
+			return ret;
+
+		data->gain = ltr390_gain_map[idx];
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int ltr390_set_int_time(struct ltr390_data *data, int val)
+{
+	int ret, idx;
+
+	for (idx = 0; idx < ARRAY_SIZE(ltr390_int_time_map_us); idx++) {
+		if (ltr390_int_time_map_us[idx] != val)
+			continue;
+
+		guard(mutex)(&data->lock);
+		ret = regmap_update_bits(data->regmap,
+					LTR390_ALS_UVS_MEAS_RATE,
+					LTR390_ALS_UVS_INT_TIME_MASK,
+					LTR390_ALS_UVS_INT_TIME(idx));
+		if (ret)
+			return ret;
+
+		data->int_time_us = ltr390_int_time_map_us[idx];
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int ltr390_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+				const int **vals, int *type, int *length, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*length = ARRAY_SIZE(ltr390_gain_map);
+		*type = IIO_VAL_INT;
+		*vals = ltr390_gain_map;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_INT_TIME:
+		*length = ARRAY_SIZE(ltr390_int_time_map_us);
+		*type = IIO_VAL_INT;
+		*vals = ltr390_int_time_map_us;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+				int val, int val2, long mask)
+{
+	struct ltr390_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (val2 != 0)
+			return -EINVAL;
+
+		return ltr390_set_gain(data, val);
+
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val2 != 0)
+			return -EINVAL;
+
+		return ltr390_set_int_time(data, val);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ltr390_info = {
+	.read_raw = ltr390_read_raw,
+	.write_raw = ltr390_write_raw,
+	.read_avail = ltr390_read_avail,
 };
 
 static int ltr390_probe(struct i2c_client *client)
@@ -139,6 +248,11 @@ static int ltr390_probe(struct i2c_client *client)
 				     "regmap initialization failed\n");
 
 	data->client = client;
+	/* default value of integration time from pg: 15 of the datasheet */
+	data->int_time_us = 100000;
+	/* default value of gain from pg: 16 of the datasheet */
+	data->gain = 3;
+
 	mutex_init(&data->lock);
 
 	indio_dev->info = &ltr390_info;
Signature · 1 line
2.43.0
author
#2 lore raw

PATCH v4 2/3 iio: light: ltr390: Add ALS channel and support for gain and resolution

In reply to Abhash Jha

Add new ALS channel and allow reading raw and scale values. Also provide gain and resolution configuration for ALS channel. Add automatic mode switching between the UVS and ALS channel based on which channel is being accessed.
The default mode in which the sensor start is ALS mode.

---
 drivers/iio/light/ltr390.c | 109 ++++++++++++++++++++++++++++++++-----
 1 file changed, 94 insertions(+), 15 deletions(-)
drivers/iio/light/ltr390.c +94 -15
index ee3d30075..953c1ed3d 100644
@@ -63,11 +63,17 @@
  */
 #define LTR390_WINDOW_FACTOR 1
 
+enum ltr390_mode {
+	LTR390_SET_ALS_MODE,
+	LTR390_SET_UVS_MODE,
+};
+
 struct ltr390_data {
 	struct regmap *regmap;
 	struct i2c_client *client;
 	/* Protects device from simulataneous reads */
 	struct mutex lock;
+	enum ltr390_mode mode;
 	int gain;
 	int int_time_us;
 };
@@ -95,6 +101,25 @@ static int ltr390_register_read(struct ltr390_data *data, u8 register_address)
 	return get_unaligned_le24(recieve_buffer);
 }
 
+static int ltr390_set_mode(struct ltr390_data *data, enum ltr390_mode mode)
+{
+	if (data->mode == mode)
+		return 0;
+
+	switch (mode) {
+	case LTR390_SET_ALS_MODE:
+		regmap_clear_bits(data->regmap, LTR390_MAIN_CTRL, LTR390_UVS_MODE);
+		break;
+
+	case LTR390_SET_UVS_MODE:
+		regmap_set_bits(data->regmap, LTR390_MAIN_CTRL, LTR390_UVS_MODE);
+		break;
+	}
+
+	data->mode = mode;
+	return 0;
+}
+
 static int ltr390_read_raw(struct iio_dev *iio_device,
 			   struct iio_chan_spec const *chan, int *val,
 			   int *val2, long mask)
@@ -105,15 +130,56 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 	guard(mutex)(&data->lock);
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		ret = ltr390_register_read(data, LTR390_UVS_DATA);
-		if (ret < 0)
-			return ret;
+		switch (chan->type) {
+		case IIO_UVINDEX:
+			ret = ltr390_set_mode(data, LTR390_SET_UVS_MODE);
+			if (ret < 0)
+				return ret;
+
+			ret = ltr390_register_read(data, LTR390_UVS_DATA);
+			if (ret < 0)
+				return ret;
+			break;
+
+		case IIO_INTENSITY:
+			ret = ltr390_set_mode(data, LTR390_SET_ALS_MODE);
+			if (ret < 0)
+				return ret;
+
+			ret = ltr390_register_read(data, LTR390_ALS_DATA);
+			if (ret < 0)
+				return ret;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
 		*val = ret;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		*val = LTR390_WINDOW_FACTOR;
-		*val2 = LTR390_COUNTS_PER_UVI;
-		return IIO_VAL_FRACTIONAL;
+		switch (chan->type) {
+		case IIO_UVINDEX:
+			ret = ltr390_set_mode(data, LTR390_SET_UVS_MODE);
+			if (ret < 0)
+				return ret;
+
+			*val = LTR390_WINDOW_FACTOR;
+			*val2 = LTR390_COUNTS_PER_UVI;
+			return IIO_VAL_FRACTIONAL;
+
+		case IIO_INTENSITY:
+			ret = ltr390_set_mode(data, LTR390_SET_ALS_MODE);
+			if (ret < 0)
+				return ret;
+
+			*val = LTR390_WINDOW_FACTOR;
+			*val2 = data->gain;
+			return IIO_VAL_FRACTIONAL;
+
+		default:
+			return -EINVAL;
+		}
 
 	case IIO_CHAN_INFO_INT_TIME:
 		*val = data->int_time_us;
@@ -128,11 +194,23 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 static const int ltr390_int_time_map_us[] = { 400000, 200000, 100000, 50000, 25000, 12500 };
 static const int ltr390_gain_map[] = { 1, 3, 6, 9, 18 };
 
-static const struct iio_chan_spec ltr390_channel = {
-	.type = IIO_UVINDEX,
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
-	.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
+static const struct iio_chan_spec ltr390_channels[] = {
+	/* UV sensor */
+	{
+		.type = IIO_UVINDEX,
+		.scan_index = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
+	},
+	/* ALS sensor */
+	{
+		.type = IIO_INTENSITY,
+		.scan_index = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
+	},
 };
 
 static int ltr390_set_gain(struct ltr390_data *data, int val)
@@ -252,12 +330,14 @@ static int ltr390_probe(struct i2c_client *client)
 	data->int_time_us = 100000;
 	/* default value of gain from pg: 16 of the datasheet */
 	data->gain = 3;
+	/* default mode for ltr390 is ALS mode */
+	data->mode = LTR390_SET_ALS_MODE;
 
 	mutex_init(&data->lock);
 
 	indio_dev->info = &ltr390_info;
-	indio_dev->channels = &ltr390_channel;
-	indio_dev->num_channels = 1;
+	indio_dev->channels = ltr390_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ltr390_channels);
 	indio_dev->name = "ltr390";
 
 	ret = regmap_read(data->regmap, LTR390_PART_ID, &part_number);
@@ -275,8 +355,7 @@ static int ltr390_probe(struct i2c_client *client)
 	/* Wait for the registers to reset before proceeding */
 	usleep_range(1000, 2000);
 
-	ret = regmap_set_bits(data->regmap, LTR390_MAIN_CTRL,
-			      LTR390_SENSOR_ENABLE | LTR390_UVS_MODE);
+	ret = regmap_set_bits(data->regmap, LTR390_MAIN_CTRL, LTR390_SENSOR_ENABLE);
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to enable the sensor\n");
 
Signature · 1 line
2.43.0
author
#3 lore raw

PATCH v4 3/3 iio: light: ltr390: Calculate 'counts_per_uvi' dynamically

In reply to Abhash Jha

counts_per_uvi depends on the current value of gain and resolution. Hence, we cannot use the hardcoded value 96.
The counts_per_uvi function gives the count based on the current gain and resolution (integration time).

---
 drivers/iio/light/ltr390.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/iio/light/ltr390.c +14 -2
index 953c1ed3d..37a017843 100644
@@ -46,6 +46,8 @@
 #define LTR390_UVS_MODE	      BIT(3)
 #define LTR390_SENSOR_ENABLE  BIT(1)
 
+#define LTR390_FRACTIONAL_PRECISION 100
+
 /*
  * At 20-bit resolution (integration time: 400ms) and 18x gain, 2300 counts of
  * the sensor are equal to 1 UV Index [Datasheet Page#8].
@@ -120,6 +122,16 @@ static int ltr390_set_mode(struct ltr390_data *data, enum ltr390_mode mode)
 	return 0;
 }
 
+static int ltr390_counts_per_uvi(struct ltr390_data *data)
+{
+	int orig_gain = 18;
+	int orig_int_time = 400;
+	int divisor = orig_gain * orig_int_time;
+	int gain = data->gain;
+
+	return DIV_ROUND_CLOSEST(23 * gain * data->int_time_us, 10 * divisor);
+}
+
 static int ltr390_read_raw(struct iio_dev *iio_device,
 			   struct iio_chan_spec const *chan, int *val,
 			   int *val2, long mask)
@@ -164,8 +176,8 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 			if (ret < 0)
 				return ret;
 
-			*val = LTR390_WINDOW_FACTOR;
-			*val2 = LTR390_COUNTS_PER_UVI;
+			*val = LTR390_WINDOW_FACTOR * LTR390_FRACTIONAL_PRECISION;
+			*val2 = ltr390_counts_per_uvi(data);
 			return IIO_VAL_FRACTIONAL;
 
 		case IIO_INTENSITY:
Signature · 1 line
2.43.0