arm64: dts: arm: Add stdout-path
Subsystems (2)
PATCH 1/1 arm64: dts: arm: Add stdout-path
Add stdout-path to the Arm devicetrees to specify the primary console. This means that distributions can boot without the need for platform-specific command line parameters i.e. they can use earlycon with no parameters and no console argument is needed at all.
--- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 4 +++- arch/arm64/boot/dts/arm/fvp-base-revc.dts | 4 +++- arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 4 +++- 3 files changed, 9 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/arm/foundation-v8.dtsi +3 -1
@@ -18,7 +18,9 @@ / { #address-cells = <2>; #size-cells = <2>; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; aliases { serial0 = &v2m_serial0;
arch/arm64/boot/dts/arm/fvp-base-revc.dts +3 -1
@@ -24,7 +24,9 @@ / { #address-cells = <2>; #size-cells = <2>; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; aliases { serial0 = &v2m_serial0;
arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +3 -1
@@ -23,7 +23,9 @@ / { #address-cells = <2>; #size-cells = <2>; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; aliases { serial0 = &v2m_serial0;
Signature · 1 line
2.25.1
Quoted 4 lines · On Tue, 30 Jul 2024 11:37:58 +0100 Debbie Martin <[email protected]> wrote:
Add stdout-path to the Arm devicetrees to specify the primary console. This means that distributions can boot without the need for platform-specific command line parameters i.e. they can use earlycon with no parameters and no console argument is needed at all.
Looks good to me, and aligns with what the other DTs do:
Quoted 1 line
Signed-off-by Debbie Martin <[email protected]>
Cheers,
Andre
Quoted 51 lines
--- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 4 +++- arch/arm64/boot/dts/arm/fvp-base-revc.dts | 4 +++- arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 4 +++- 3 files changed, 9 insertions(+), 3 deletions(-)arch/arm64/boot/dts/arm/foundation-v8.dtsi +3
-1@@ -18,7 +18,9 @@ / { #address-cells = <2>; #size-cells = <2>; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; aliases { serial0 = &v2m_serial0;arch/arm64/boot/dts/arm/fvp-base-revc.dts +3
-1@@ -24,7 +24,9 @@ / { #address-cells = <2>; #size-cells = <2>; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; aliases { serial0 = &v2m_serial0;arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +3
-1@@ -23,7 +23,9 @@ / { #address-cells = <2>; #size-cells = <2>; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; aliases { serial0 = &v2m_serial0;
Sudeep Holla
AppliedQuoted 5 lines · Debbie Martin
Add stdout-path to the Arm devicetrees to specify the primary console. This means that distributions can boot without the need for platform-specific command line parameters i.e. they can use earlycon with no parameters and no console argument is needed at all.
Applied to sudeep.holla/linux (for-next/juno/updates), thanks!
[1/1] arm64: dts: arm: Add stdout-path
https://git.kernel.org/sudeep.holla/c/9d4a984a53be
--
Regards,
Sudeep