Skip to contentSkip to conversation

memory: emif: Use of_property_read_bool()

PATCH Applied Rob Herring (Arm) 2 participants 2 messages Jul 31, 2024 – Aug 2, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 memory: emif: Use of_property_read_bool()

Use of_property_read_bool() to read boolean properties rather than of_find_property(). This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed.

---
 drivers/memory/emif.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
drivers/memory/emif.c +4 -9
index 8c5ad5c025fa..974ed641473e 100644
@@ -864,7 +864,7 @@ static void of_get_custom_configs(struct device_node *np_emif,
 						be32_to_cpup(poll_intvl);
 	}
 
-	if (of_find_property(np_emif, "extended-temp-part", &len))
+	if (of_property_read_bool(np_emif, "extended-temp-part"))
 		cust_cfgs->mask |= EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART;
 
 	if (!is_custom_config_valid(cust_cfgs, emif->dev)) {
@@ -880,13 +880,9 @@ static void of_get_ddr_info(struct device_node *np_emif,
 		struct ddr_device_info *dev_info)
 {
 	u32 density = 0, io_width = 0;
-	int len;
 
-	if (of_find_property(np_emif, "cs1-used", &len))
-		dev_info->cs1_used = true;
-
-	if (of_find_property(np_emif, "cal-resistor-per-cs", &len))
-		dev_info->cal_resistors_per_cs = true;
+	dev_info->cs1_used = of_property_read_bool(np_emif, "cs1-used");
+	dev_info->cal_resistors_per_cs = of_property_read_bool(np_emif, "cal-resistor-per-cs");
 
 	if (of_device_is_compatible(np_ddr, "jedec,lpddr2-s4"))
 		dev_info->type = DDR_TYPE_LPDDR2_S4;
@@ -916,7 +912,6 @@ static struct emif_data *of_get_memory_device_details(
 	struct ddr_device_info		*dev_info = NULL;
 	struct emif_platform_data	*pd = NULL;
 	struct device_node		*np_ddr;
-	int				len;
 
 	np_ddr = of_parse_phandle(np_emif, "device-handle", 0);
 	if (!np_ddr)
@@ -944,7 +939,7 @@ static struct emif_data *of_get_memory_device_details(
 
 	of_property_read_u32(np_emif, "phy-type", &pd->phy_type);
 
-	if (of_find_property(np_emif, "hw-caps-ll-interface", &len))
+	if (of_property_read_bool(np_emif, "hw-caps-ll-interface"))
 		pd->hw_caps |= EMIF_HW_CAPS_LL_INTERFACE;
 
 	of_get_ddr_info(np_emif, np_ddr, dev_info);
Signature · 1 line
2.43.0
#1 lore raw
Quoted 8 lines · Rob Herring (Arm)

Use of_property_read_bool() to read boolean properties rather than of_find_property(). This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed.

[...]

Applied, thanks!

[1/1] memory: emif: Use of_property_read_bool()

      https://git.kernel.org/krzk/linux-mem-ctrl/c/23d22b0fe6a12317e9d17bb17720285ac4ba4d54

Best regards,

Signature · 1 line
Krzysztof Kozlowski <[email protected]>