U-Boot support for the Rock 5 ITX
Subsystems (3)
Heiko Stuebner
maintainerv2 cover U-Boot support for the Rock 5 ITX
Support for the Rock 5 ITX is now part of 6.11-rc1, so add support for it in u-boot as well.
The naming follows Dragan's suggestion in the mainline submission:
"the name of this board deviates from the standard Radxa naming scheme,
which is something like "ROCK <number><letter>" thus, "rock-5a" is fine, but it should be "rock-5-itx", simply because there's a space between "5" and "ITX" in "ROCK 5 ITX"
Not sure if the u-boot side wants less dashes, but we'll see :-)
U-Boot master + this series can detect all mass storage devices (emmc, sd, nvme) and also both PCIe connected network controllers
changes in v2:
- apply Jonas' review comments:
- keep vcc3v3_mkey always on
- Jonas as reviewer
- entry in the list of Rockchip boards
- config mass-storage support
- config led support
- config pmic+spi support
- add Kever's review-tag to patches 1-3
Alexey Charkov (1):
arm64: dts: rockchip: add thermal zones information on RK3588
Dragan Simic (1):
arm64: dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant
OPPs
Heiko Stuebner (2):
arm64: dts: rockchip: add ROCK 5 ITX board
board: rockchip: Add Radxa ROCK 5 ITX
arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi | 22 +
arch/arm/mach-rockchip/rk3588/Kconfig | 29 +
board/radxa/rock-5-itx-rk3588/Kconfig | 12 +
board/radxa/rock-5-itx-rk3588/MAINTAINERS | 8 +
configs/rock-5-itx-rk3588_defconfig | 111 +
doc/board/rockchip/rockchip.rst | 1 +
...-pinctrl.dtsi => rk3588-base-pinctrl.dtsi} | 0
.../{rk3588s.dtsi => rk3588-base.dtsi} | 155 +-
...pinctrl.dtsi => rk3588-extra-pinctrl.dtsi} | 0
.../{rk3588.dtsi => rk3588-extra.dtsi} | 4 +-
.../src/arm64/rockchip/rk3588-rock-5-itx.dts | 1177 ++++++++
dts/upstream/src/arm64/rockchip/rk3588.dtsi | 420 +--
dts/upstream/src/arm64/rockchip/rk3588j.dtsi | 2 +-
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 2677 +----------------
include/configs/rock-5-itx-rk3588.h | 15 +
15 files changed, 1546 insertions(+), 3087 deletions(-)
create mode 100644 arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
create mode 100644 board/radxa/rock-5-itx-rk3588/Kconfig
create mode 100644 board/radxa/rock-5-itx-rk3588/MAINTAINERS
create mode 100644 configs/rock-5-itx-rk3588_defconfig
rename dts/upstream/src/arm64/rockchip/{rk3588s-pinctrl.dtsi => rk3588-base-pinctrl.dtsi} (100%)
copy dts/upstream/src/arm64/rockchip/{rk3588s.dtsi => rk3588-base.dtsi} (95%)
rename dts/upstream/src/arm64/rockchip/{rk3588-pinctrl.dtsi => rk3588-extra-pinctrl.dtsi} (100%)
copy dts/upstream/src/arm64/rockchip/{rk3588.dtsi => rk3588-extra.dtsi} (99%)
create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-rock-5-itx.dts
rewrite dts/upstream/src/arm64/rockchip/rk3588.dtsi (99%)
rewrite dts/upstream/src/arm64/rockchip/rk3588s.dtsi (99%)
create mode 100644 include/configs/rock-5-itx-rk3588.hSignature · 1 line
2.39.2
Heiko Stuebner
maintainerPATCH v2 1/4 arm64: dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs
From: Dragan Simic <[email protected]>
Rename the Rockchip RK3588 SoC dtsi files and, consequently, adjust their contents appropriately, to prepare them for the ability to specify different CPU and GPU OPPs for each of the supported RK3588 SoC variants.
As already discussed, [1][2][3][4] some of the RK3588 SoC variants require different OPPs, and it makes more sense to have the OPPs already defined when a board dts(i) file includes one of the SoC variant dtsi files (rk3588.dtsi, rk3588j.dtsi or rk3588s.dtsi), rather than requiring the board dts(i) file to also include a separate rk3588*-opp.dtsi file. The choice of the SoC variant is already made by the inclusion of the SoC dtsi file into the board dts(i) file, and it doesn't make much sense to, effectively, allow the board dts(i) file to include and use an incompatible set of OPPs for the already selected RK3588 SoC variant.
The new naming scheme for the RK3588 SoC dtsi files uses "-base" and "-extra" suffixes to denote the DT data shared between all RK5588 SoC variants, and the DT data shared between the unrestricted SoC variants, respectively. For example, the DT data for the RK3588 includes both rk3588-base.dtsi and rk3588-extra.dtsi, because it's an unrestricted SoC variant, while the DT data for the RK3588S variant includes rk3588-base.dtsi only, because it's a restricted SoC variant, feature- and interface-wise. This achieves a more logical naming of the RK3588 SoC dtsi files, which reflects the way DT data for the SoC variants is built by "stacking" the SoC variant features made available through the "-base" and "-extra" SoC dtsi files. Additionally, the SoC variant dtsi files (rk3588.dtsi, rk3588j.dtsi and rk3588s.dtsi) are no longer parents to any other SoC variant dtsi files, which should help with making the new "stacking" approach cleaner and easier to follow.
The RK3588 pinctrl dtsi files are also renamed in the same way, for the sake of consistency. This also keeps the "-base" and "-extra" groups of the dtsi files together when looked at in a directory listing, which is helpful.
The per-SoC-variant OPPs should go directly into the SoC dtsi files, if no more than one SoC variant uses those OPPs, or be put into a separate "-opp" dtsi file that's shared between and included from two or more SoC variant dtsi files. An example for the former is the non-shared OPP data that should go directly into the RK3588J SoC variant dtsi file (i.e. rk3588j.dtsi), and an example for the latter is the shared OPP data that should be put into rk3588-opp.dtsi and be included from the RK3588 and RK3588S SoC variant dtsi files (i.e. rk3588.dtsi and rk3588s.dtsi, respectively). Consequently, if the OPPs for the RK3588 and RK3588S SoC variants are ever made different, the shared rk3588-opp.dtsi file should be deleted and the new OPPs should be put directly into rk3588.dtsi and rk3588s.dtsi. [4]
No functional changes are introduced, which was validated by decompiling and comparing all affected dtb files before and after these changes.
As a side note, due to the nature of introduced changes, this commit is best viewed using the --break-rewrites option for git-log(1).
[1] https://lore.kernel.org/linux-rockchip/[email protected]/
[2] https://lore.kernel.org/linux-rockchip/CABjd4Yxi=+3gkNnH3BysUzzYsji-=-yROtzEc8jM_g0roKB0-w@mail.gmail.com/
[3] https://lore.kernel.org/linux-rockchip/[email protected]/
[4] https://lore.kernel.org/linux-rockchip/673dcf47596e7bc8ba065034e339bb1bbf9cdcb0.1716948159.git.dsimic@manjaro.org/T/#u
[ upstream commit: def88eb4d8365a4aa064d28405d03550a9d0a3be ]
---
...-pinctrl.dtsi => rk3588-base-pinctrl.dtsi} | 0
.../{rk3588s.dtsi => rk3588-base.dtsi} | 2 +-
...pinctrl.dtsi => rk3588-extra-pinctrl.dtsi} | 0
.../{rk3588.dtsi => rk3588-extra.dtsi} | 4 +-
dts/upstream/src/arm64/rockchip/rk3588.dtsi | 420 +--
dts/upstream/src/arm64/rockchip/rk3588j.dtsi | 2 +-
dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 2677 +----------------
7 files changed, 18 insertions(+), 3087 deletions(-)
rename dts/upstream/src/arm64/rockchip/{rk3588s-pinctrl.dtsi => rk3588-base-pinctrl.dtsi} (100%)
copy dts/upstream/src/arm64/rockchip/{rk3588s.dtsi => rk3588-base.dtsi} (99%)
rename dts/upstream/src/arm64/rockchip/{rk3588-pinctrl.dtsi => rk3588-extra-pinctrl.dtsi} (100%)
copy dts/upstream/src/arm64/rockchip/{rk3588.dtsi => rk3588-extra.dtsi} (99%) rewrite dts/upstream/src/arm64/rockchip/rk3588.dtsi (99%) rewrite dts/upstream/src/arm64/rockchip/rk3588s.dtsi (99%)
dts/upstream/src/arm64/rockchip/rk3588-base-pinctrl.dtsi renamed from dts/upstream/src/arm64/rockchip/rk3588s-pinctrl.dtsi +0 -0
dts/upstream/src/arm64/rockchip/rk3588-base.dtsi renamed from dts/upstream/src/arm64/rockchip/rk3588s.dtsi +1 -1
@@ -2667,4 +2667,4 @@ }; }; -#include "rk3588s-pinctrl.dtsi" +#include "rk3588-base-pinctrl.dtsi"
dts/upstream/src/arm64/rockchip/rk3588-extra-pinctrl.dtsi renamed from dts/upstream/src/arm64/rockchip/rk3588-pinctrl.dtsi +0 -0
dts/upstream/src/arm64/rockchip/rk3588-extra.dtsi renamed from dts/upstream/src/arm64/rockchip/rk3588.dtsi +2 -2
@@ -3,8 +3,8 @@ * Copyright (c) 2021 Rockchip Electronics Co., Ltd. */ -#include "rk3588s.dtsi" -#include "rk3588-pinctrl.dtsi" +#include "rk3588-base.dtsi" +#include "rk3588-extra-pinctrl.dtsi" / { usb_host1_xhci: usb@fc400000 {
dts/upstream/src/arm64/rockchip/rk3588.dtsi +7 -413
420 lines not on this page · raw message
dts/upstream/src/arm64/rockchip/rk3588j.dtsi +1 -1
@@ -4,4 +4,4 @@ * */ -#include "rk3588.dtsi" +#include "rk3588-extra.dtsi"
dts/upstream/src/arm64/rockchip/rk3588s.dtsi +7 -2670
2,560 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.2
Part of the diff is not shown here. View the raw message.
Heiko Stuebner
maintainerPATCH v2 2/4 arm64: dts: rockchip: add thermal zones information on RK3588
In reply to Heiko StuebnerFrom: Alexey Charkov <[email protected]>
This includes the necessary device tree data to allow thermal monitoring on RK3588(s) using the on-chip TSADC device, along with trip points for automatic thermal management.
Each of the CPU clusters (one for the little cores and two for the big cores) get a passive cooling trip point at 85C, which will trigger DVFS throttling of the respective cluster upon reaching a high temperature condition.
All zones also have a critical trip point at 115C, which will trigger a reset.
[ upstream commit: 510cd9e688453166b2bff3999ed21cac97385bb5 ]
--- .../src/arm64/rockchip/rk3588-base.dtsi | 153 ++++++++++++++++++ 1 file changed, 153 insertions(+)
dts/upstream/src/arm64/rockchip/rk3588-base.dtsi +153 -0
@@ -10,6 +10,7 @@ #include <dt-bindings/reset/rockchip,rk3588-cru.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/ata/ahci.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "rockchip,rk3588";
@@ -2368,6 +2369,158 @@ status = "disabled"; }; + thermal_zones: thermal-zones { + /* sensor near the center of the SoC */ + package_thermal: package-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsadc 0>; + + trips { + package_crit: package-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + /* sensor between A76 cores 0 and 1 */ + bigcore0_thermal: bigcore0-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&tsadc 1>; + + trips { + bigcore0_alert: bigcore0-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + bigcore0_crit: bigcore0-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&bigcore0_alert>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + /* sensor between A76 cores 2 and 3 */ + bigcore2_thermal: bigcore2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&tsadc 2>; + + trips { + bigcore2_alert: bigcore2-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + bigcore2_crit: bigcore2-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&bigcore2_alert>; + cooling-device = + <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + /* sensor between the four A55 cores */ + little_core_thermal: littlecore-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&tsadc 3>; + + trips { + littlecore_alert: littlecore-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + littlecore_crit: littlecore-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&littlecore_alert>; + cooling-device = + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + /* sensor near the PD_CENTER power domain */ + center_thermal: center-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsadc 4>; + + trips { + center_crit: center-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsadc 5>; + + trips { + gpu_crit: gpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + npu_thermal: npu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsadc 6>; + + trips { + npu_crit: npu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + tsadc: tsadc@fec00000 { compatible = "rockchip,rk3588-tsadc"; reg = <0x0 0xfec00000 0x0 0x400>;
Signature · 1 line
2.39.2
Heiko Stuebner
maintainerPATCH v2 3/4 arm64: dts: rockchip: add ROCK 5 ITX board
In reply to Heiko StuebnerThe ROCK 5 ITX as the name suggests is made in the ITX form factor and actually built in a form to be used in a regular case even providing connectors for regular front-panel io.
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot, 2*2.5Gb PCIe-connected Ethernet NICs.
As of yet unsupported display options consist of 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel connector.
Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf
[ upstream commit: 31390eb8ffbf2b6be7d789708ec08b635d7a3eb8 ]
--- .../src/arm64/rockchip/rk3588-rock-5-itx.dts | 1177 +++++++++++++++++ 1 file changed, 1177 insertions(+) create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-rock-5-itx.dts
dts/upstream/src/arm64/rockchip/rk3588-rock-5-itx.dts new file +1177 -0
@@ -0,0 +1,1177 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Radxa Limited + * Copyright (c) 2024 Heiko Stuebner <[email protected]> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> +#include "dt-bindings/usb/pd.h" +#include "rk3588.dtsi" + +/ { + model = "Radxa ROCK 5 ITX"; + compatible = "radxa,rock-5-itx", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Mask Rom"; + linux,code = <KEY_SETUP>; + press-threshold-microvolt = <1750>; + }; + }; + + analog-sound { + compatible = "audio-graph-card"; + label = "rk3588-es8316"; + dais = <&i2s0_8ch_p0>; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + power-led1 { + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + hdd-led2 { + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 64 128 192 255>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm14 0 10000 0>; + }; + + /* M.2 E-KEY */ + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; + }; + + typec_vin: regulator-typec-vin { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vbus5v0_typec_en>; + regulator-name = "typec_vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc33_io64: regulator-vcc33-io64 { + compatible = "regulator-fixed"; + regulator-name = "vcc33_io64"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_ekey: regulator-vcc3v3-ekey { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ekey_en>; + regulator-name = "vcc3v3_ekey"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_lan: vcc3v3_lan_phy2: regulator-vcc3v3-lan { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_mkey: regulator-vcc3v3-mkey { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x4_pwren_h>; + regulator-name = "vcc3v3_mkey"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb20: vcc5v0_usb12: vcc5v0_usb34: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren_h>; + regulator-name = "vcc5v0_usb"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1m2_xfer>; + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +/* CAM0 connector */ +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; +}; + +/* M.2 E-key */ +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m1_xfer>; +}; + +/* RTC and LCD0 connector */ +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6m0_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "wifi_32kout"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + }; +}; + +/* Audio codec and CAM1 connector */ +&i2c7 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c7m0_xfer>; + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +/* FUSB302 and LCD1 connector */ +&i2c8 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c8m4_xfer>; + status = "okay"; + + usbc0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&typec_vin>; + + usb_con: connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + power-role = "source"; + source-pdos = + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc0_orien_sw: endpoint { + remote-endpoint = <&usbdp_phy0_orientation_switch>; + }; + }; + + port@1 { + reg = <1>; + + usbc0_role_sw: endpoint { + remote-endpoint = <&dwc3_0_role_switch>; + }; + }; + + port@2 { + reg = <2>; + + dp_altmode_mux: endpoint { + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + }; + }; + }; + }; + }; +}; + +&i2c8m4_xfer { + rockchip,pins = + /* i2c8_scl_m4 */ + <3 RK_PC2 9 &pcfg_pull_up_drv_level_6>, + /* i2c8_sda_m4 */ + <3 RK_PC3 9 &pcfg_pull_up_drv_level_6>; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + hysteresis = <2000>; + temperature = <50000>; + type = "active"; + }; + + package_fan1: package-fan1 { + hysteresis = <2000>; + temperature = <65000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + cooling-device = <&fan0 THERMAL_NO_LIMIT 1>; + trip = <&package_fan0>; + }; + map1 { + cooling-device = <&fan0 2 THERMAL_NO_LIMIT>; + trip = <&package_fan1>; + }; + }; +}; + +/* M.2 E-key */ +&pcie2x1l0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x1_0_perstn_m1_l>; + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_ekey>; + status = "okay"; +}; + +/* RTL8125B_1 */ +&pcie2x1l1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x1_1_perstn>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_lan>; + status = "okay"; +}; + +/* RTL8125B_2 */ +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20x1_2_perstn>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_lan_phy2>; + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 1 2 2>; + /* separate clock lines from the clock generator to phy and devices */ + rockchip,rx-common-refclk-mode = <0 0 0 0>; + status = "okay"; +}; + +/* ASMedia ASM1164 Sata controller */ +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x2_perstn_m1_l>; + reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc33_io64>; + status = "okay"; +}; + +/* M.2 M.key */ +&pcie3x4 { + num-lanes = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x4_perstn_m1_l>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_mkey>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_pins: led-pins { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie20x1_2_perstn: pcie20x1-2-perstn { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x1_0_perstn_m1_l: pcie30x1-0-perstn-m1-l { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x1_1_perstn: pcie30x1-1-perstn { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + ekey_en: ekey-en { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + pcie30x4_pwren_h: pcie30x4-pwren-h { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb { + usb_host_pwren_h: usb-host-pwren-h { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + gl3523_reset: rl3523-reset { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vbus5v0_typec_en: vbus5v0-typec-en { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmirx { + hdmirx_det: hdmirx-det { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-wlan { + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + dp { + dp1_hpd: dp1-hpd { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm14 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm14m1_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + mmc-hs200-1_8v; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <200000000>; + no-sdio; + no-mmc; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +/* M.2 E-KEY */ +&sdio { + broken-cd; + bus-width = <4>; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-sd; + no-mmc; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom0_pins>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_ekey>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + spi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <837500>; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* Connected to M.2 E-key */ +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + /* connected to USB3 hub, which is powered by vcc5v0_usb12 */ + phy-supply = <&vcc5v0_usb12>; + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + /* connected to USB2 hub, which is powered by vcc5v0_usb20 */ + phy-supply = <&vcc5v0_usb20>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb20>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + usb-role-switch; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + dwc3_0_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_role_sw>; + }; + }; +}; + +&usb_host1_xhci { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + peer-hub = <&hub_3_0>; + vdd-supply = <&vcc_3v3_s3>; + }; + + /* 3.0 hub on port 4 */ + hub_3_0: hub@2 { + compatible = "usb5e3,620"; + reg = <2>; + peer-hub = <&hub_2_0>; + pinctrl-names = "default"; + pinctrl-0 = <&gl3523_reset>; + reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_3v3_s3>; + }; +}; + +&usbdp_phy0 { + mode-switch; + orientation-switch; + sbu1-dc-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + usbdp_phy0_orientation_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_orien_sw>; + }; + + usbdp_phy0_dp_altmode_mux: endpoint@1 { + reg = <1>; + remote-endpoint = <&dp_altmode_mux>; + }; + }; +}; + +&usbdp_phy1 { + rockchip,dp-lane-mux = <2 3>; + status = "okay"; +};
Signature · 1 line
2.39.2
Heiko Stuebner
maintainerPATCH v2 4/4 board: rockchip: Add Radxa ROCK 5 ITX
In reply to Heiko StuebnerThe Rock 5 ITX is board in ITX form factor using the RK358 SoC
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot, 2*2.5Gb PCIe-connected Ethernet NICs.
Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel connector.
Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf
The naming scheme with the dashes follows Dragan's comment on the mainline devicetree commit:
"the name of this board deviates from the standard Radxa naming scheme,
which is something like "ROCK <number><letter>" thus, "rock-5a" is fine, but it should be "rock-5-itx", simply because there's a space between "5" and "ITX" in "ROCK 5 ITX"
--- arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi | 22 ++++ arch/arm/mach-rockchip/rk3588/Kconfig | 29 ++++++ board/radxa/rock-5-itx-rk3588/Kconfig | 12 +++ board/radxa/rock-5-itx-rk3588/MAINTAINERS | 8 ++ configs/rock-5-itx-rk3588_defconfig | 111 +++++++++++++++++++++ doc/board/rockchip/rockchip.rst | 1 + include/configs/rock-5-itx-rk3588.h | 15 +++ 7 files changed, 198 insertions(+) create mode 100644 arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi create mode 100644 board/radxa/rock-5-itx-rk3588/Kconfig create mode 100644 board/radxa/rock-5-itx-rk3588/MAINTAINERS create mode 100644 configs/rock-5-itx-rk3588_defconfig create mode 100644 include/configs/rock-5-itx-rk3588.h
arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi new file +22 -0
@@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Collabora Ltd. + */ + +#include "rk3588-u-boot.dtsi" + +&fspim2_pins { + bootph-pre-ram; + bootph-some-ram; +}; + +&sfc { + flash@0 { + bootph-pre-ram; + bootph-some-ram; + }; +}; + +&vcc3v3_mkey { + regulator-always-on; +};
arch/arm/mach-rockchip/rk3588/Kconfig +29 -0
@@ -185,6 +185,34 @@ config TARGET_ROCK5B_RK3588 USB PD over USB Type-C Size: 100mm x 72mm (Pico-ITX form factor) +config TARGET_ROCK_5_ITX_RK3588 + bool "Radxa ROCK-5-ITX RK3588 board" + select BOARD_LATE_INIT + help + Radxa ROCK-5-ITX is a Rockchip RK3588 based SBC (Single Board + Computer) by Radxa in the ITX formfactor. + + There are variants depending on the DRAM size : from 4G up to 32G. + + Specification: + + Rockchip Rk3588 SoC + 4x ARM Cortex-A76, 4x ARM Cortex-A55 + 4/8/16/24/32GB memory LPDDR5 + Mali G610MC4 GPU + 2x MIPI CSI 2 multiple lanes connector + eMMC + uSD slot (up to 128GB) + M.2 M-key and M.2 E-key connector + 4x SATA + 2x USB 2.0 + 4x USB 3.0 Type-A, 2x USB 2.0 Panel, 1x USB 3.0 Type-C + 2x HDMI 2.1 output, 1x HDMI input + DP via Type-C + 2x DSI via PCB connector + 2x 2.5 Gbps Ethernet port + Front-panel connectors for audio and case-power, -leds + Powered by either 12V, ATX power-supply or PoE + config TARGET_SIGE7_RK3588 bool "ArmSoM Sige7 RK3588 board" select BOARD_LATE_INIT
@@ -319,6 +347,7 @@ source "board/pine64/quartzpro64-rk3588/Kconfig" source "board/turing/turing-rk1-rk3588/Kconfig" source "board/radxa/rock5a-rk3588s/Kconfig" source "board/radxa/rock5b-rk3588/Kconfig" +source "board/radxa/rock-5-itx-rk3588/Kconfig" source "board/rockchip/evb_rk3588/Kconfig" source "board/rockchip/toybrick_rk3588/Kconfig" source "board/theobroma-systems/jaguar_rk3588/Kconfig"
board/radxa/rock-5-itx-rk3588/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_ROCK_5_ITX_RK3588 + +config SYS_BOARD + default "rock-5-itx-rk3588" + +config SYS_VENDOR + default "radxa" + +config SYS_CONFIG_NAME + default "rock-5-itx-rk3588" + +endif
board/radxa/rock-5-itx-rk3588/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +ROCK-5-ITX-RK3588 +M: Heiko Stuebner <[email protected]> +R: Jonas Karlman <[email protected]> +S: Maintained +F: board/radxa/rock-5-itx-rk3588 +F: include/configs/rock-5-itx-rk3588.h +F: configs/rock-5-itx-rk3588_defconfig +F: arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
configs/rock-5-itx-rk3588_defconfig new file +111 -0
111 lines not on this page · raw message
doc/board/rockchip/rockchip.rst +1 -0
@@ -128,6 +128,7 @@ List of mainline supported Rockchip boards: - Generic RK3588S/RK3588 (generic-rk3588) - Indiedroid Nova (nova-rk3588s) - Pine64 QuartzPro64 (quartzpro64-rk3588) + - Radxa ROCK 5 ITX (rock-5-itx-rk3588) - Radxa ROCK 5A (rock5a-rk3588s) - Radxa ROCK 5B (rock5b-rk3588) - Rockchip Toybrick TB-RK3588X (toybrick-rk3588)
include/configs/rock-5-itx-rk3588.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2024 Heiko Stuebner <[email protected]> +*/ + +#ifndef __ROCK_5_ITX_RK3588_H +#define __ROCK_5_ITX_RK3588_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __ROCK_5_ITX_RK3588_H */
Signature · 1 line
2.39.2
Re: [PATCH v2 4/4] board: rockchip: Add Radxa ROCK 5 ITX
Quoted 16 lines · Heiko Stuebner
The Rock 5 ITX is board in ITX form factor using the RK358 SoC
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot, 2*2.5Gb PCIe-connected Ethernet NICs.
Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel connector.
Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf
Quoted 8 lines
The naming scheme with the dashes follows Dragan's comment on the mainline devicetree commit:
"the name of this board deviates from the standard Radxa naming scheme,
which is something like "ROCK <number><letter>" thus, "rock-5a" is fine, but it should be "rock-5-itx", simply because there's a space between "5" and "ITX" in "ROCK 5 ITX"Signed-off-by Heiko Stuebner <[email protected]>
Thanks,
- Kever
Quoted 272 lines
--- arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi | 22 ++++ arch/arm/mach-rockchip/rk3588/Kconfig | 29 ++++++ board/radxa/rock-5-itx-rk3588/Kconfig | 12 +++ board/radxa/rock-5-itx-rk3588/MAINTAINERS | 8 ++ configs/rock-5-itx-rk3588_defconfig | 111 +++++++++++++++++++++ doc/board/rockchip/rockchip.rst | 1 + include/configs/rock-5-itx-rk3588.h | 15 +++ 7 files changed, 198 insertions(+)create mode 100644
arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsicreate mode 100644 board/radxa/rock-5-itx-rk3588/Kconfig create mode 100644 board/radxa/rock-5-itx-rk3588/MAINTAINERS create mode 100644 configs/rock-5-itx-rk3588_defconfig create mode 100644include/configs/rock-5-itx-rk3588.harch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi new file +22
-0@@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Collabora Ltd. + */ + +#include "rk3588-u-boot.dtsi" + +&fspim2_pins { + bootph-pre-ram; + bootph-some-ram; +}; + +&sfc { + flash@0 { + bootph-pre-ram; + bootph-some-ram; + }; +}; + +&vcc3v3_mkey { + regulator-always-on; +};arch/arm/mach-rockchip/rk3588/Kconfig +29
-0@@ -185,6 +185,34 @@ config TARGET_ROCK5B_RK3588 USB PD over USB Type-C Size: 100mm x 72mm (Pico-ITX form factor) +config TARGET_ROCK_5_ITX_RK3588 + bool "Radxa ROCK-5-ITX RK3588 board" + select BOARD_LATE_INIT + help + Radxa ROCK-5-ITX is a Rockchip RK3588 based SBC (Single Board + Computer) by Radxa in the ITX formfactor. + + There are variants depending on the DRAM size : from 4G up to 32G. + + Specification: + + Rockchip Rk3588 SoC + 4x ARM Cortex-A76, 4x ARM Cortex-A55 + 4/8/16/24/32GB memory LPDDR5 + Mali G610MC4 GPU + 2x MIPI CSI 2 multiple lanes connector + eMMC + uSD slot (up to 128GB) + M.2 M-key and M.2 E-key connector + 4x SATA + 2x USB 2.0 + 4x USB 3.0 Type-A, 2x USB 2.0 Panel, 1x USB 3.0 Type-C + 2x HDMI 2.1 output, 1x HDMI input + DP via Type-C + 2x DSI via PCB connector + 2x 2.5 Gbps Ethernet port + Front-panel connectors for audio and case-power, -leds + Powered by either 12V, ATX power-supply or PoE + config TARGET_SIGE7_RK3588 bool "ArmSoM Sige7 RK3588 board" select BOARD_LATE_INIT@@ -319,6 +347,7 @@ source "board/pine64/quartzpro64-rk3588/Kconfig" source "board/turing/turing-rk1-rk3588/Kconfig" source "board/radxa/rock5a-rk3588s/Kconfig" source "board/radxa/rock5b-rk3588/Kconfig" +source "board/radxa/rock-5-itx-rk3588/Kconfig" source "board/rockchip/evb_rk3588/Kconfig" source "board/rockchip/toybrick_rk3588/Kconfig" source "board/theobroma-systems/jaguar_rk3588/Kconfig"board/radxa/rock-5-itx-rk3588/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_ROCK_5_ITX_RK3588 + +config SYS_BOARD + default "rock-5-itx-rk3588" + +config SYS_VENDOR + default "radxa" + +config SYS_CONFIG_NAME + default "rock-5-itx-rk3588" + +endifboard/radxa/rock-5-itx-rk3588/MAINTAINERS new file +8
-0@@ -0,0 +1,8 @@ +ROCK-5-ITX-RK3588 +M: Heiko Stuebner <[email protected]> +R: Jonas Karlman <[email protected]> +S: Maintained +F: board/radxa/rock-5-itx-rk3588 +F: include/configs/rock-5-itx-rk3588.h +F: configs/rock-5-itx-rk3588_defconfig +F: arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsiconfigs/rock-5-itx-rk3588_defconfig new file +111
-0@@ -0,0 +1,111 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-rock-5-itx" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_ROCK5B_RK3588=y +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-rock-5-itx.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SF_DEFAULT_BUS=5 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_XTX=y +CONFIG_PHYLIB=y +CONFIG_RTL8169=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_LAN75XX=y +CONFIG_USB_ETHER_LAN78XX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=ydoc/board/rockchip/rockchip.rst +1
-0@@ -128,6 +128,7 @@ List of mainline supported Rockchip boards: - Generic RK3588S/RK3588 (generic-rk3588) - Indiedroid Nova (nova-rk3588s) - Pine64 QuartzPro64 (quartzpro64-rk3588) + - Radxa ROCK 5 ITX (rock-5-itx-rk3588) - Radxa ROCK 5A (rock5a-rk3588s) - Radxa ROCK 5B (rock5b-rk3588) - Rockchip Toybrick TB-RK3588X (toybrick-rk3588)include/configs/rock-5-itx-rk3588.h new file +15
-0@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2024 Heiko Stuebner <[email protected]> +*/ + +#ifndef __ROCK_5_ITX_RK3588_H +#define __ROCK_5_ITX_RK3588_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __ROCK_5_ITX_RK3588_H */
Re: [PATCH v2 4/4] board: rockchip: Add Radxa ROCK 5 ITX
In reply to Heiko StuebnerQuoted 2 lines · Heiko Stuebner
The Rock 5 ITX is board in ITX form factor using the RK358 SoC
type "is a board"
typo: "RK3588"
Quoted 297 lines
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot, 2*2.5Gb PCIe-connected Ethernet NICs.
Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel connector.
Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdfThe naming scheme with the dashes follows Dragan's comment on the mainline devicetree commit:
"the name of this board deviates from the standard Radxa naming scheme,
which is something like "ROCK <number><letter>" thus, "rock-5a" is fine, but it should be "rock-5-itx", simply because there's a space between "5" and "ITX" in "ROCK 5 ITX"Signed-off-by Heiko Stuebner <[email protected]>--- arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi | 22 ++++ arch/arm/mach-rockchip/rk3588/Kconfig | 29 ++++++ board/radxa/rock-5-itx-rk3588/Kconfig | 12 +++ board/radxa/rock-5-itx-rk3588/MAINTAINERS | 8 ++ configs/rock-5-itx-rk3588_defconfig | 111 +++++++++++++++++++++ doc/board/rockchip/rockchip.rst | 1 + include/configs/rock-5-itx-rk3588.h | 15 +++ 7 files changed, 198 insertions(+) create mode 100644 arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi create mode 100644 board/radxa/rock-5-itx-rk3588/Kconfig create mode 100644 board/radxa/rock-5-itx-rk3588/MAINTAINERS create mode 100644 configs/rock-5-itx-rk3588_defconfig create mode 100644 include/configs/rock-5-itx-rk3588.harch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi new file +22
-0@@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Collabora Ltd. + */ + +#include "rk3588-u-boot.dtsi" + +&fspim2_pins { + bootph-pre-ram; + bootph-some-ram; +}; + +&sfc { + flash@0 { + bootph-pre-ram; + bootph-some-ram; + }; +}; + +&vcc3v3_mkey { + regulator-always-on; +};arch/arm/mach-rockchip/rk3588/Kconfig +29
-0@@ -185,6 +185,34 @@ config TARGET_ROCK5B_RK3588 USB PD over USB Type-C Size: 100mm x 72mm (Pico-ITX form factor) +config TARGET_ROCK_5_ITX_RK3588 + bool "Radxa ROCK-5-ITX RK3588 board" + select BOARD_LATE_INIT + help + Radxa ROCK-5-ITX is a Rockchip RK3588 based SBC (Single Board + Computer) by Radxa in the ITX formfactor. + + There are variants depending on the DRAM size : from 4G up to 32G. + + Specification: + + Rockchip Rk3588 SoC + 4x ARM Cortex-A76, 4x ARM Cortex-A55 + 4/8/16/24/32GB memory LPDDR5 + Mali G610MC4 GPU + 2x MIPI CSI 2 multiple lanes connector + eMMC + uSD slot (up to 128GB) + M.2 M-key and M.2 E-key connector + 4x SATA + 2x USB 2.0 + 4x USB 3.0 Type-A, 2x USB 2.0 Panel, 1x USB 3.0 Type-C + 2x HDMI 2.1 output, 1x HDMI input + DP via Type-C + 2x DSI via PCB connector + 2x 2.5 Gbps Ethernet port + Front-panel connectors for audio and case-power, -leds + Powered by either 12V, ATX power-supply or PoE + config TARGET_SIGE7_RK3588 bool "ArmSoM Sige7 RK3588 board" select BOARD_LATE_INIT@@ -319,6 +347,7 @@ source "board/pine64/quartzpro64-rk3588/Kconfig" source "board/turing/turing-rk1-rk3588/Kconfig" source "board/radxa/rock5a-rk3588s/Kconfig" source "board/radxa/rock5b-rk3588/Kconfig" +source "board/radxa/rock-5-itx-rk3588/Kconfig" source "board/rockchip/evb_rk3588/Kconfig" source "board/rockchip/toybrick_rk3588/Kconfig" source "board/theobroma-systems/jaguar_rk3588/Kconfig"board/radxa/rock-5-itx-rk3588/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_ROCK_5_ITX_RK3588 + +config SYS_BOARD + default "rock-5-itx-rk3588" + +config SYS_VENDOR + default "radxa" + +config SYS_CONFIG_NAME + default "rock-5-itx-rk3588" + +endifboard/radxa/rock-5-itx-rk3588/MAINTAINERS new file +8
-0@@ -0,0 +1,8 @@ +ROCK-5-ITX-RK3588 +M: Heiko Stuebner <[email protected]> +R: Jonas Karlman <[email protected]> +S: Maintained +F: board/radxa/rock-5-itx-rk3588 +F: include/configs/rock-5-itx-rk3588.h +F: configs/rock-5-itx-rk3588_defconfig +F: arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsiconfigs/rock-5-itx-rk3588_defconfig new file +111
-0@@ -0,0 +1,111 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-rock-5-itx" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_ROCK5B_RK3588=y +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-rock-5-itx.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SF_DEFAULT_BUS=5 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_XTX=y +CONFIG_PHYLIB=y +CONFIG_RTL8169=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_LAN75XX=y +CONFIG_USB_ETHER_LAN78XX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=ydoc/board/rockchip/rockchip.rst +1
-0@@ -128,6 +128,7 @@ List of mainline supported Rockchip boards: - Generic RK3588S/RK3588 (generic-rk3588) - Indiedroid Nova (nova-rk3588s) - Pine64 QuartzPro64 (quartzpro64-rk3588) + - Radxa ROCK 5 ITX (rock-5-itx-rk3588) - Radxa ROCK 5A (rock5a-rk3588s) - Radxa ROCK 5B (rock5b-rk3588) - Rockchip Toybrick TB-RK3588X (toybrick-rk3588)include/configs/rock-5-itx-rk3588.h new file +15
-1@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2024 Heiko Stuebner <[email protected]> +*/ + +#ifndef __ROCK_5_ITX_RK3588_H +#define __ROCK_5_ITX_RK3588_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __ROCK_5_ITX_RK3588_H */ --2.39.2