arm64: dts: rockchip: actually enable pmu-io-domains on qnap-ts433
Subsystems (2)
Heiko Stuebner
maintainerPATCH 1/1 arm64: dts: rockchip: actually enable pmu-io-domains on qnap-ts433
Contrary to the vendor-kernel the pmu-io-domains are not enabled by default. This resulted in the value not being set according to the regulator, which in turn made the gmac0 interface that is connected to the vccio4 supply inoperable.
Fixes 64b7f16fb394 ("arm64: dts: rockchip: add 2 pmu_io_domain supplies for Qnap-TS433")
Signed-off-by Heiko Stuebner <[email protected]>
--- arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +1 -0
@@ -604,6 +604,7 @@ vcc5v0_otg_en: vcc5v0-otg-en { &pmu_io_domains { vccio4-supply = <&vcc_1v8>; vccio6-supply = <&vcc_1v8>; + status = "okay"; }; &sata1 {
Signature · 7 lines
2.39.2 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Quoted 6 lines · Heiko Stuebner
Contrary to the vendor-kernel the pmu-io-domains are not enabled by default. This resulted in the value not being set according to the regulator, which in turn made the gmac0 interface that is connected to the vccio4 supply inoperable.
Applied, thanks!
[1/1] arm64: dts: rockchip: actually enable pmu-io-domains on qnap-ts433
commit: 40cc4257169712f0ae3835820a4c5afbdd1a16ff
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>