Skip to contentSkip to conversation

configs: rockchip: enable "ums" command for Radxa ROCK 5B

PATCH In review FUKAUMI Naoki 2 participants 2 messages Aug 6, 2024 – Aug 9, 2024

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 configs: rockchip: enable "ums" command for Radxa ROCK 5B

USB Type-C port is configured as "peripheral" port. so enable "ums" command to use as USB Mass Storage device.
("rockusb" command is already enabled and working)

---
 configs/rock5b-rk3588_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/rock5b-rk3588_defconfig +1 -0
index fc118cea7ba..80a2f2fed58 100644
@@ -39,6 +39,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_REGULATOR=y
 # CONFIG_SPL_DOS_PARTITION is not set
Signature · 1 line
2.43.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 5 lines · FUKAUMI Naoki

USB Type-C port is configured as "peripheral" port. so enable "ums" command to use as USB Mass Storage device.
("rockusb" command is already enabled and working)

Thanks,
- Kever

Quoted 16 lines
---
  configs/rock5b-rk3588_defconfig | 1 +
  1 file changed, 1 insertion(+)
configs/rock5b-rk3588_defconfig +1 -0
index fc118cea7ba..80a2f2fed58 100644
@@ -39,6 +39,7 @@ CONFIG_CMD_MMC=y
  CONFIG_CMD_PCI=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
  # CONFIG_CMD_SETEXPR is not set
  CONFIG_CMD_REGULATOR=y
  # CONFIG_SPL_DOS_PARTITION is not set