Skip to contentSkip to conversation

ASoC: cs35l56: Use regmap_read_bypassed() to wake the device

PATCH In review Simon Trimmer 2 participants 2 messages Aug 7, 2024 – Aug 8, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: cs35l56: Use regmap_read_bypassed() to wake the device

Now that regmap_read_bypassed() has been added to the kernel it is preferable to wake the device with a read rather than a write as the utility function can be called at a time before the device has been identified.

---
 sound/soc/codecs/cs35l56-shared.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)
sound/soc/codecs/cs35l56-shared.c +5 -14
index e7e8d617da94..91b3c1c8575c 100644
@@ -450,32 +450,23 @@ static const struct reg_sequence cs35l56_hibernate_seq[] = {
 	REG_SEQ0(CS35L56_DSP_VIRTUAL1_MBOX_1, CS35L56_MBOX_CMD_ALLOW_AUTO_HIBERNATE),
 };
 
-static const struct reg_sequence cs35l56_hibernate_wake_seq[] = {
-	REG_SEQ0(CS35L56_DSP_VIRTUAL1_MBOX_1, CS35L56_MBOX_CMD_WAKEUP),
-};
-
 static void cs35l56_issue_wake_event(struct cs35l56_base *cs35l56_base)
 {
+	unsigned int val;
+
 	/*
 	 * Dummy transactions to trigger I2C/SPI auto-wake. Issue two
 	 * transactions to meet the minimum required time from the rising edge
 	 * to the last falling edge of wake.
 	 *
-	 * It uses bypassed write because we must wake the chip before
+	 * It uses bypassed read because we must wake the chip before
 	 * disabling regmap cache-only.
-	 *
-	 * This can NAK on I2C which will terminate the write sequence so the
-	 * single-write sequence is issued twice.
 	 */
-	regmap_multi_reg_write_bypassed(cs35l56_base->regmap,
-					cs35l56_hibernate_wake_seq,
-					ARRAY_SIZE(cs35l56_hibernate_wake_seq));
+	regmap_read_bypassed(cs35l56_base->regmap, CS35L56_IRQ1_STATUS, &val);
 
 	usleep_range(CS35L56_WAKE_HOLD_TIME_US, 2 * CS35L56_WAKE_HOLD_TIME_US);
 
-	regmap_multi_reg_write_bypassed(cs35l56_base->regmap,
-					cs35l56_hibernate_wake_seq,
-					ARRAY_SIZE(cs35l56_hibernate_wake_seq));
+	regmap_read_bypassed(cs35l56_base->regmap, CS35L56_IRQ1_STATUS, &val);
 
 	cs35l56_wait_control_port_ready();
 }
Signature · 1 line
2.43.0
maintainer
#1 lore raw
Quoted 6 lines · Simon Trimmer

Now that regmap_read_bypassed() has been added to the kernel it is preferable to wake the device with a read rather than a write as the utility function can be called at a time before the device has been identified.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: cs35l56: Use regmap_read_bypassed() to wake the device

      commit: 7063a710830a09b01734be7f4ffd23f0ef72a57e

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark