arm64: dts: imx93-tqma9352-mba93: Fix USB hub node name
Fabio Estevam
reviewerPATCH 1/1 arm64: dts: imx93-tqma9352-mba93: Fix USB hub node name
From: Fabio Estevam <[email protected]>
According to microchip,usb2514.yaml, the node name must contain 'usb-hub'.
Change it accordingly to fix the following dt-schema warning:
hub@1: $nodename:0: 'hub@1' does not match '^usb(@.*)?'
--- arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts | 2 +- arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts +1 -1
@@ -533,7 +533,7 @@ &usbotg2 { samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; - hub_2_0: hub@1 { + hub_2_0: usb-hub@1 { compatible = "usb424,2517"; reg = <1>; reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts +1 -1
@@ -486,7 +486,7 @@ &usbotg2 { samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; - hub_2_0: hub@1 { + hub_2_0: usb-hub@1 { compatible = "usb424,2517"; reg = <1>; reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
Signature · 1 line
2.34.1
Hi,
thanks for the patch.
Am Donnerstag, 8. August 2024, 14:32:06 CEST schrieb Fabio Estevam:
Quoted 10 lines
From: Fabio Estevam <[email protected]>
According to microchip,usb2514.yaml, the node name must contain 'usb-hub'.
Change it accordingly to fix the following dt-schema warning:
hub@1: $nodename:0: 'hub@1' does not match '^usb(@.*)?'
Signed-off-by Fabio Estevam <[email protected]>
Quoted 32 lines
--- arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts | 2 +- arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts +1
-1@@ -533,7 +533,7 @@ &usbotg2 { samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; - hub_2_0: hub@1 { + hub_2_0: usb-hub@1 { compatible = "usb424,2517"; reg = <1>; reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts +1
-1@@ -486,7 +486,7 @@ &usbotg2 { samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; - hub_2_0: hub@1 { + hub_2_0: usb-hub@1 { compatible = "usb424,2517"; reg = <1>; reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
Signature · 4 lines
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider http://www.tq-group.com/
Shawn Guo
AppliedQuoted 10 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
According to microchip,usb2514.yaml, the node name must contain 'usb-hub'.
Change it accordingly to fix the following dt-schema warning:
hub@1: $nodename:0: 'hub@1' does not match '^usb(@.*)?'
Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks!