Skip to contentSkip to conversation

Support branch counters in block annotation

PATCH Superseded [email protected] 4 participants 15 messages Aug 8, 2024 – Aug 13, 2024 perf events

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover Support branch counters in block annotation

From: Kan Liang <[email protected]>

Changes since V1:
- Add Acked-by from Namhyung for patch 1 and 2.
- Use array to replace pointer to store the abbr name. (Patch 5) (Namhyung)
- Add -v to print the value like "A=<n>,B=<n>", rather than histogram. (Patch 6) (Namhyung)

The branch counters logging (A.K.A LBR event logging) introduces a per-counter indication of precise event occurrences in LBRs. It can provide a means to attribute exposed retirement latency to combinations of events across a block of instructions. It also provides a means of attributing Timed LBR latencies to events.

The kernel support and basic perf tool support have been merged.
https://lore.kernel.org/lkml/[email protected]/

This series is to provide advanced perf tool support via adding the branch counters information in block annotation. It can further facilitate the analysis of branch blocks.

The patch 1 and 2 are to fix two existing issues of --total-cycles and the branch counters feature.

The patch 3-9 are the advanced perf tool support.

Here are some examples.

perf annotation:

$perf record -e "{branch-instructions:ppp,branch-misses}:S" -j any,counter $perf report --total-cycles --stdio

# To display the perf.data header info, please use --header/--header-only options. #
#
# Total Lost Samples: 0
#
# Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }' # Event count (approx.): 1610046
#
# Branch counter abbr list:
# branch-instructions:ppp = A

 # branch-misses = B
 # '-' No event occurs
 # '+' Event occurrences may be lost due to branch counter saturated
 #
 # Sampled Cycles%  Sampled Cycles  Avg Cycles%  Avg Cycles          Branch Counter [Program Block Range]
 # ...............  ..............  ...........  ..........  ......................  ..
 #
           57.55%            2.5M        0.00%           3             |A   |-   |                 ...
           25.27%            1.1M        0.00%           2             |AA  |-   |                 ...
           15.61%          667.2K        0.00%           1             |A   |-   |                 ...
            0.16%            6.9K        0.81%         575             |A   |-   |                 ...
            0.16%            6.8K        1.38%         977             |AA  |-   |                 ...
            0.16%            6.8K        0.04%          28             |AA  |B   |                 ...
            0.15%            6.6K        1.33%         946             |A   |-   |                 ...
            0.11%            4.5K        0.06%          46             |AAA+|-   |                 ...

With -v applied,
$perf report --total-cycles --stdio -v

 # Sampled Cycles%  Sampled Cycles  Avg Cycles%  Avg Cycles          Branch Counter [Program Block Range]
 # ...............  ..............  ...........  ..........  ......................  ..................
 #
           57.55%            2.5M        0.00%           3               A=1 ,B=-                  ...
           25.27%            1.1M        0.00%           2               A=2 ,B=-                  ...
           15.61%          667.2K        0.00%           1               A=1 ,B=-                  ...
            0.16%            6.9K        0.81%         575               A=1 ,B=-                  ...
            0.16%            6.8K        1.38%         977               A=2 ,B=-                  ...
            0.16%            6.8K        0.04%          28               A=2 ,B=1                  ...
            0.15%            6.6K        1.33%         946               A=1 ,B=-                  ...
            0.11%            4.5K        0.06%          46               A=3+,B=-                  ...

(The below output is in the TUI mode. Users can press 'B' to display the Branch counter abbr list.)

Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }', 4000 Hz, Event count (approx.):
f3 /home/sdp/test/tchain_edit [Percent: local period]

Percent       │ IPC Cycle       Branch Counter (Average IPC: 1.39, IPC Coverage: 29.4%)
              │                                     0000000000401755 <f3>:
  0.00   0.00 │                                       endbr64
              │                                       push    %rbp
              │                                       mov     %rsp,%rbp
              │                                       movl    $0x0,-0x4(%rbp)
  0.00   0.00 │1.33     3          |A   |-   |      ↓ jmp     25
 11.03  11.03 │                                 11:   mov     -0x4(%rbp),%eax
              │                                       and     $0x1,%eax
              │                                       test    %eax,%eax
 17.13  17.13 │2.41     1          |A   |-   |      ↓ je      21
              │                                       addl    $0x1,-0x4(%rbp)
 21.84  21.84 │2.22     2          |AA  |-   |      ↓ jmp     25
 17.13  17.13 │                                 21:   addl    $0x1,-0x4(%rbp)
 21.84  21.84 │                                 25:   cmpl    $0x270f,-0x4(%rbp)
 11.03  11.03 │0.61     3          |A   |-   |      ↑ jle     11
              │                                       nop
              │                                       pop     %rbp
  0.00   0.00 │0.24    20          |AA  |B   |      ← ret

perf script:

$perf script -F +brstackinsn,+brcntr

# Branch counter abbr list:
# branch-instructions:ppp = A

 # branch-misses = B
 # '-' No event occurs
 # '+' Event occurrences may be lost due to branch counter saturated
     tchain_edit  332203 3366329.405674:      53030 branch-instructions:ppp:            401781 f3+0x2c (home/sdp/test/tchain_edit)
        f3+31:
        0000000000401774        insn: eb 04                     br_cntr: AA     # PRED 5 cycles [5]
        000000000040177a        insn: 81 7d fc 0f 27 00 00
        0000000000401781        insn: 7e e3                     br_cntr: A      # PRED 1 cycles [6] 2.00 IPC
        0000000000401766        insn: 8b 45 fc
        0000000000401769        insn: 83 e0 01
        000000000040176c        insn: 85 c0

$perf script -F +brstackinsn,+brcntr -v

     tchain_edit  332203 3366329.405674:      53030 branch-instructions:ppp:            401781 f3+0x2c (/home/sdp/test/tchain_edit)
        f3+31:
        0000000000401774        insn: eb 04                     br_cntr: branch-instructions:ppp 2 branch-misses 0      # PRED 5 cycles [5]
        000000000040177a        insn: 81 7d fc 0f 27 00 00
        0000000000401781        insn: 7e e3                     br_cntr: branch-instructions:ppp 1 branch-misses 0      # PRED 1 cycles [6] 2.00 IPC
        0000000000401766        insn: 8b 45 fc
        0000000000401769        insn: 83 e0 01
        000000000040176c        insn: 85 c0

Kan Liang (9):
perf report: Fix --total-cycles --stdio output error perf report: Remove the first overflow check for branch counters perf evlist: Save branch counters information
perf annotate: Save branch counters for each block perf evsel: Assign abbr name for the branch counter events perf report: Display the branch counter histogram perf annotate: Display the branch counter histogram perf script: Add branch counters
perf test: Add new test cases for the branch counter feature

 tools/perf/Documentation/perf-report.txt |   1 +
 tools/perf/Documentation/perf-script.txt |   2 +-
 tools/perf/builtin-annotate.c            |  13 +-
 tools/perf/builtin-diff.c                |   8 +-
 tools/perf/builtin-report.c              |  25 ++-
 tools/perf/builtin-script.c              |  69 ++++++-
 tools/perf/builtin-top.c                 |   4 +-
 tools/perf/tests/shell/record.sh         |  17 +-
 tools/perf/ui/browsers/annotate.c        |  18 +-
 tools/perf/ui/browsers/hists.c           |  18 +-
 tools/perf/util/annotate.c               | 253 +++++++++++++++++++++--
 tools/perf/util/annotate.h               |  24 ++-
 tools/perf/util/block-info.c             |  66 +++++-
 tools/perf/util/block-info.h             |   8 +-
 tools/perf/util/branch.h                 |   1 +
 tools/perf/util/disasm.c                 |   1 +
 tools/perf/util/evlist.c                 |  68 ++++++
 tools/perf/util/evlist.h                 |   2 +
 tools/perf/util/evsel.c                  |  15 +-
 tools/perf/util/evsel.h                  |  14 ++
 tools/perf/util/hist.c                   |   5 +-
 tools/perf/util/hist.h                   |   2 +-
 tools/perf/util/machine.c                |   3 +
 23 files changed, 567 insertions(+), 70 deletions(-)
Signature · 1 line
2.38.1
#1 lore raw

PATCH v2 1/9 perf report: Fix --total-cycles --stdio output error

From: Kan Liang <[email protected]>

The --total-cycles may output wrong information with the --stdio.

For example,
perf record -e "{cycles,instructions}",cache-misses -b sleep 1 perf report --total-cycles --stdio

The total cycles output of {cycles,instructions} and cache-misses are almost the same.

# Samples: 938 of events 'anon group { cycles, instructions }' # Event count (approx.): 938
#

 # Sampled Cycles%  Sampled Cycles  Avg Cycles%  Avg Cycles
 # ...............  ..............  ...........  ..........
  ..................................................>
 #
           11.19%            2.6K        0.10%          21
                          [perf_iterate_ctx+48 -> >
            5.79%            1.4K        0.45%          97
            [__intel_pmu_enable_all.constprop.0+80 -> __intel_>
            5.11%            1.2K        0.33%          71
                             [native_write_msr+0 ->>

# Samples: 293 of event 'cache-misses'
# Event count (approx.): 293
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles

                                                  [>
 # ...............  ..............  ...........  ..........
   ..................................................>
 #
           11.19%            2.6K        0.13%          21
                          [perf_iterate_ctx+48 -> >
            5.79%            1.4K        0.59%          97
[__intel_pmu_enable_all.constprop.0+80 -> __intel_>
            5.11%            1.2K        0.43%          71
                             [native_write_msr+0 ->>

With the symbol_conf.event_group, the perf report should only report the block information of the leader event in a group.
However, the current implementation retrieves the next event's block information, rather than the next group leader's block information.

Make sure the index is updated even if the event is skipped.

With the patch,

# Samples: 293 of event 'cache-misses'
# Event count (approx.): 293
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles

                                                  [>
 # ...............  ..............  ...........  ..........
   ..................................................>
 #
           37.98%            9.0K        4.05%         299
   [perf_event_addr_filters_exec+0 -> perf_event_a>
           11.19%            2.6K        0.28%          21
                          [perf_iterate_ctx+48 -> >
            5.79%            1.4K        1.32%          97
[__intel_pmu_enable_all.constprop.0+80 -> __intel_>
Fixes 6f7164fa231a ("perf report: Sort by sampled cycles percent per block for stdio")
---
 tools/perf/builtin-report.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/perf/builtin-report.c +2 -1
index 930052961c1a..312396b52468 100644
@@ -565,6 +565,7 @@ static int evlist__tty_browse_hists(struct evlist *evlist, struct report *rep, c
 		struct hists *hists = evsel__hists(pos);
 		const char *evname = evsel__name(pos);
 
+		i++;
 		if (symbol_conf.event_group && !evsel__is_group_leader(pos))
 			continue;
 
@@ -574,7 +575,7 @@ static int evlist__tty_browse_hists(struct evlist *evlist, struct report *rep, c
 		hists__fprintf_nr_sample_events(hists, rep, evname, stdout);
 
 		if (rep->total_cycles_mode) {
-			report__browse_block_hists(&rep->block_reports[i++].hist,
+			report__browse_block_hists(&rep->block_reports[i - 1].hist,
 						   rep->min_percent, pos, NULL);
 			continue;
 		}
Signature · 1 line
2.38.1
#2 lore raw

PATCH v2 2/9 perf report: Remove the first overflow check for branch counters

In reply to [email protected]

From: Kan Liang <[email protected]>

A false overflow warning is triggered if a sample doesn't have any LBRs recorded and the branch counters feature is enabled.

The current code does OVERFLOW_CHECK_u64() at the very beginning when reading the information of branch counters. It assumes that there is at least one LBR in the PEBS record. But it is a valid case that 0 LBR is recorded especially in a high context switch.

Remove the OVERFLOW_CHECK_u64(). The later OVERFLOW_CHECK() should be good enough to check the overflow when reading the information of the branch counters.

Fixes 9fbb4b02302b ("perf tools: Add branch counter knob")
---
 tools/perf/util/evsel.c | 2 --
 1 file changed, 2 deletions(-)
tools/perf/util/evsel.c +0 -2
index d607056b73c9..f22f402d54cc 100644
@@ -2884,8 +2884,6 @@ int evsel__parse_sample(struct evsel *evsel, union perf_event *event,
 		array = (void *)array + sz;
 
 		if (evsel__has_branch_counters(evsel)) {
-			OVERFLOW_CHECK_u64(array);
-
 			data->branch_stack_cntr = (u64 *)array;
 			sz = data->branch_stack->nr * sizeof(u64);
 
Signature · 1 line
2.38.1
#3 lore raw

PATCH v2 3/9 perf evlist: Save branch counters information

In reply to [email protected]

From: Kan Liang <[email protected]>

The branch counters logging (A.K.A LBR event logging) introduces a per-counter indication of precise event occurrences in LBRs. The kernel only dumps the number of occurrences into a record. The perf tool has to map the number to the corresponding event.

Add evlist__update_br_cntr() to go through the evlist to pick the events that are configured to be logged. Assign a logical idx to track them, and add the total number of the events in the leader event. The total number will be used to allocate the space to save the branch counters for a block. The logical idx will be used to locate the corresponding event quickly in the following patches.

It only needs to iterate the evlist once. The
evsel__has_branch_counters() is also optimized.

---
 tools/perf/util/evlist.c | 15 +++++++++++++++
 tools/perf/util/evlist.h |  2 ++
 tools/perf/util/evsel.c  | 13 +++++++------
 tools/perf/util/evsel.h  |  8 ++++++++
 4 files changed, 32 insertions(+), 6 deletions(-)
tools/perf/util/evlist.c +15 -0
index 4b2538e4f679..68bbd3ea771b 100644
@@ -79,6 +79,7 @@ void evlist__init(struct evlist *evlist, struct perf_cpu_map *cpus,
 	evlist->ctl_fd.fd = -1;
 	evlist->ctl_fd.ack = -1;
 	evlist->ctl_fd.pos = -1;
+	evlist->nr_br_cntr = -1;
 }
 
 struct evlist *evlist__new(void)
@@ -1264,6 +1265,20 @@ u64 evlist__combined_branch_type(struct evlist *evlist)
 	return branch_type;
 }
 
+void evlist__update_br_cntr(struct evlist *evlist)
+{
+	struct evsel *evsel;
+	int i = 0;
+
+	evlist__for_each_entry(evlist, evsel) {
+		if (evsel->core.attr.branch_sample_type & PERF_SAMPLE_BRANCH_COUNTERS) {
+			evsel->br_cntr_idx = i++;
+			evsel__leader(evsel)->br_cntr_nr++;
+		}
+	}
+	evlist->nr_br_cntr = i;
+}
+
 bool evlist__valid_read_format(struct evlist *evlist)
 {
 	struct evsel *first = evlist__first(evlist), *pos = first;
tools/perf/util/evlist.h +2 -0
index cccc34da5a02..b46f1a320783 100644
@@ -57,6 +57,7 @@ struct evlist {
 	bool		 enabled;
 	int		 id_pos;
 	int		 is_pos;
+	int		 nr_br_cntr;
 	u64		 combined_sample_type;
 	enum bkw_mmap_state bkw_mmap_state;
 	struct {
@@ -219,6 +220,7 @@ int evlist__apply_filters(struct evlist *evlist, struct evsel **err_evsel,
 u64 __evlist__combined_sample_type(struct evlist *evlist);
 u64 evlist__combined_sample_type(struct evlist *evlist);
 u64 evlist__combined_branch_type(struct evlist *evlist);
+void evlist__update_br_cntr(struct evlist *evlist);
 bool evlist__sample_id_all(struct evlist *evlist);
 u16 evlist__id_hdr_size(struct evlist *evlist);
 
tools/perf/util/evsel.c +7 -6
index f22f402d54cc..38a74d6dde49 100644
@@ -2636,17 +2636,18 @@ u64 evsel__bitfield_swap_branch_flags(u64 value)
 
 static inline bool evsel__has_branch_counters(const struct evsel *evsel)
 {
-	struct evsel *cur, *leader = evsel__leader(evsel);
+	struct evsel *leader = evsel__leader(evsel);
 
 	/* The branch counters feature only supports group */
 	if (!leader || !evsel->evlist)
 		return false;
 
-	evlist__for_each_entry(evsel->evlist, cur) {
-		if ((leader == evsel__leader(cur)) &&
-		    (cur->core.attr.branch_sample_type & PERF_SAMPLE_BRANCH_COUNTERS))
-			return true;
-	}
+	if (evsel->evlist->nr_br_cntr < 0)
+		evlist__update_br_cntr(evsel->evlist);
+
+	if (leader->br_cntr_nr > 0)
+		return true;
+
 	return false;
 }
 
tools/perf/util/evsel.h +8 -0
index a5da4b03bb1c..a393dae1dc96 100644
@@ -148,6 +148,14 @@ struct evsel {
 	 */
 	__u64			synth_sample_type;
 
+	/*
+	 * Store the branch counter related information.
+	 * br_cntr_idx: The idx of the branch counter event in the evlist
+	 * br_cntr_nr:  The number of the branch counter event in the group
+	 *	        (Only available for the leader event)
+	 */
+	int			br_cntr_idx;
+	int			br_cntr_nr;
 	/*
 	 * bpf_counter_ops serves two use cases:
 	 *   1. perf-stat -b          counting events used byBPF programs
Signature · 1 line
2.38.1
#4 lore raw

PATCH v2 4/9 perf annotate: Save branch counters for each block

In reply to [email protected]

From: Kan Liang <[email protected]>

When annotating a basic block, it's useful to display the occurrences of other events in the block.

The branch counter feature is only available for newer Intel platforms. So a dedicated option to display the branch counters is not introduced. Reuse the existing --total-cycles option, which triggers the annotation of a basic block and displays the cycle-related annotation. When the branch counters information is available, the branch counters are automatically appended after all the cycle-related annotation. Accounting the branch counters as well when accounting the cycles in hist__account_cycles().

In struct annotated_branch, introduce a br_cntr array to save the accumulation of each branch counter.
In a sample, all the branch counters for a branch are saved in a u64 space. Because the saturation of a branch counter is small, e.g., for Intel Sierra Forest, the saturation is only 3. Add ANNOTATION__BR_CNTR_SATURATED_FLAG to indicate if a branch counter once saturated. That can be used to indicate a potential event lost because of the saturation.

---
 tools/perf/builtin-annotate.c |  3 +-
 tools/perf/builtin-diff.c     |  4 +--
 tools/perf/builtin-report.c   |  2 +-
 tools/perf/builtin-top.c      |  4 +--
 tools/perf/util/annotate.c    | 68 ++++++++++++++++++++++++++++-------
 tools/perf/util/annotate.h    | 10 +++++-
 tools/perf/util/branch.h      |  1 +
 tools/perf/util/hist.c        |  5 +--
 tools/perf/util/hist.h        |  2 +-
 tools/perf/util/machine.c     |  3 ++
 10 files changed, 80 insertions(+), 22 deletions(-)
tools/perf/builtin-annotate.c +2 -1
index efcadb7620b8..dbe94441e4e9 100644
@@ -221,7 +221,8 @@ static int process_branch_callback(struct evsel *evsel,
 	if (a.map != NULL)
 		dso__set_hit(map__dso(a.map));
 
-	hist__account_cycles(sample->branch_stack, al, sample, false, NULL);
+	hist__account_cycles(sample->branch_stack, al, sample, false,
+			     NULL, evsel);
 
 	ret = hist_entry_iter__add(&iter, &a, PERF_MAX_STACK_DEPTH, ann);
 out:
tools/perf/builtin-diff.c +2 -2
index 57d300d8e570..2d9226b1de52 100644
@@ -431,8 +431,8 @@ static int diff__process_sample_event(struct perf_tool *tool,
 			goto out;
 		}
 
-		hist__account_cycles(sample->branch_stack, &al, sample, false,
-				     NULL);
+		hist__account_cycles(sample->branch_stack, &al, sample,
+				     false, NULL, evsel);
 		break;
 
 	case COMPUTE_STREAM:
tools/perf/builtin-report.c +1 -1
index 312396b52468..13b41c5f99ed 100644
@@ -328,7 +328,7 @@ static int process_sample_event(struct perf_tool *tool,
 	if (ui__has_annotation() || rep->symbol_ipc || rep->total_cycles_mode) {
 		hist__account_cycles(sample->branch_stack, &al, sample,
 				     rep->nonany_branch_mode,
-				     &rep->total_cycles);
+				     &rep->total_cycles, evsel);
 	}
 
 	ret = hist_entry_iter__add(&iter, &al, rep->max_stack, rep);
tools/perf/builtin-top.c +2 -2
index d1a06a88d693..76a44321b9cb 100644
@@ -735,8 +735,8 @@ static int hist_iter__top_callback(struct hist_entry_iter *iter,
 		perf_top__record_precise_ip(top, iter->he, iter->sample, evsel, al->addr);
 
 	hist__account_cycles(iter->sample->branch_stack, al, iter->sample,
-		     !(top->record_opts.branch_stack & PERF_SAMPLE_BRANCH_ANY),
-		     NULL);
+			     !(top->record_opts.branch_stack & PERF_SAMPLE_BRANCH_ANY),
+			     NULL, evsel);
 	return 0;
 }
 
tools/perf/util/annotate.c +56 -12

122 lines not on this page · raw message

tools/perf/util/annotate.h +9 -1
index 64e70d716ff1..76ccb0e721c7 100644
@@ -14,6 +14,7 @@
 #include "spark.h"
 #include "hashmap.h"
 #include "disasm.h"
+#include "branch.h"
 
 struct hist_browser_timer;
 struct hist_entry;
@@ -288,6 +289,9 @@ struct annotated_source {
 struct annotation_line *annotated_source__get_line(struct annotated_source *src,
 						   s64 offset);
 
+/* A branch counter once saturated */
+#define ANNOTATION__BR_CNTR_SATURATED_FLAG	(1ULL << 63)
+
 /**
  * struct annotated_branch - basic block and IPC information for a symbol.
  *
@@ -297,6 +301,7 @@ struct annotation_line *annotated_source__get_line(struct annotated_source *src,
  * @cover_insn: Number of distinct, actually executed instructions.
  * @cycles_hist: Array of cyc_hist for each instruction.
  * @max_coverage: Maximum number of covered basic block (used for block-range).
+ * @br_cntr: Array of the occurrences of events (branch counters) during a block.
  *
  * This struct is used by two different codes when the sample has branch stack
  * and cycles information.  annotation__compute_ipc() calculates average IPC
@@ -313,6 +318,7 @@ struct annotated_branch {
 	unsigned int		cover_insn;
 	struct cyc_hist		*cycles_hist;
 	u64			max_coverage;
+	u64			*br_cntr;
 };
 
 struct LOCKABLE annotation {
@@ -383,7 +389,9 @@ struct annotated_branch *annotation__get_branch(struct annotation *notes);
 
 int addr_map_symbol__account_cycles(struct addr_map_symbol *ams,
 				    struct addr_map_symbol *start,
-				    unsigned cycles);
+				    unsigned cycles,
+				    struct evsel *evsel,
+				    u64 br_cntr);
 
 int hist_entry__inc_addr_samples(struct hist_entry *he, struct perf_sample *sample,
 				 struct evsel *evsel, u64 addr);
tools/perf/util/branch.h +1 -0
index 87704d713ff6..b80c12c74bbb 100644
@@ -34,6 +34,7 @@ struct branch_info {
 	struct addr_map_symbol from;
 	struct addr_map_symbol to;
 	struct branch_flags    flags;
+	u64		       branch_stack_cntr;
 	char		       *srcline_from;
 	char		       *srcline_to;
 };
tools/perf/util/hist.c +3 -2
index f8ee1cd6929d..0121ea72a2ba 100644
@@ -2667,7 +2667,7 @@ int hists__unlink(struct hists *hists)
 
 void hist__account_cycles(struct branch_stack *bs, struct addr_location *al,
 			  struct perf_sample *sample, bool nonany_branch_mode,
-			  u64 *total_cycles)
+			  u64 *total_cycles, struct evsel *evsel)
 {
 	struct branch_info *bi;
 	struct branch_entry *entries = perf_sample__branch_entries(sample);
@@ -2691,7 +2691,8 @@ void hist__account_cycles(struct branch_stack *bs, struct addr_location *al,
 			for (int i = bs->nr - 1; i >= 0; i--) {
 				addr_map_symbol__account_cycles(&bi[i].from,
 					nonany_branch_mode ? NULL : prev,
-					bi[i].flags.cycles);
+					bi[i].flags.cycles, evsel,
+					bi[i].branch_stack_cntr);
 				prev = &bi[i].to;
 
 				if (total_cycles)
tools/perf/util/hist.h +1 -1
index 5273f5c37050..30c13fc8cbe4 100644
@@ -742,7 +742,7 @@ unsigned int hists__overhead_width(struct hists *hists);
 
 void hist__account_cycles(struct branch_stack *bs, struct addr_location *al,
 			  struct perf_sample *sample, bool nonany_branch_mode,
-			  u64 *total_cycles);
+			  u64 *total_cycles, struct evsel *evsel);
 
 struct option;
 int parse_filter_percentage(const struct option *opt, const char *arg, int unset);
tools/perf/util/machine.c +3 -0
index 8477edefc299..19fc7979c66b 100644
@@ -2141,6 +2141,7 @@ struct branch_info *sample__resolve_bstack(struct perf_sample *sample,
 	unsigned int i;
 	const struct branch_stack *bs = sample->branch_stack;
 	struct branch_entry *entries = perf_sample__branch_entries(sample);
+	u64 *branch_stack_cntr = sample->branch_stack_cntr;
 	struct branch_info *bi = calloc(bs->nr, sizeof(struct branch_info));
 
 	if (!bi)
@@ -2150,6 +2151,8 @@ struct branch_info *sample__resolve_bstack(struct perf_sample *sample,
 		ip__resolve_ams(al->thread, &bi[i].to, entries[i].to);
 		ip__resolve_ams(al->thread, &bi[i].from, entries[i].from);
 		bi[i].flags = entries[i].flags;
+		if (branch_stack_cntr)
+			bi[i].branch_stack_cntr  = branch_stack_cntr[i];
 	}
 	return bi;
 }
Signature · 1 line
2.38.1
#5 lore raw

PATCH v2 5/9 perf evsel: Assign abbr name for the branch counter events

In reply to [email protected]

From: Kan Liang <[email protected]>

There could be several branch counter events. If perf tool output the result via the format "event name + a number", the line could be very long and hard to read.

An abbreviation is introduced to replace the full event name in the display. The abbreviation starts from 'A' to 'Z9', which can support up to 286 events. The same abbreviation will be assigned if the same events are found in the evlist. The next patch will utilize the abbreviation name to show the branch counter events in the output.

---
 tools/perf/util/evlist.c | 55 +++++++++++++++++++++++++++++++++++++++-
 tools/perf/util/evsel.h  |  6 +++++
 2 files changed, 60 insertions(+), 1 deletion(-)
tools/perf/util/evlist.c +54 -1
index 68bbd3ea771b..c0379fa1ccfe 100644
@@ -33,6 +33,7 @@
 #include "util/bpf-filter.h"
 #include "util/stat.h"
 #include "util/util.h"
+#include "util/env.h"
 #include "util/intel-tpebs.h"
 #include <signal.h>
 #include <unistd.h>
@@ -1265,15 +1266,67 @@ u64 evlist__combined_branch_type(struct evlist *evlist)
 	return branch_type;
 }
 
+static struct evsel *
+evlist__find_dup_event_from_prev(struct evlist *evlist, struct evsel *event)
+{
+	struct evsel *pos;
+
+	evlist__for_each_entry(evlist, pos) {
+		if (event == pos)
+			break;
+		if ((pos->core.attr.branch_sample_type & PERF_SAMPLE_BRANCH_COUNTERS) &&
+		    !strcmp(pos->name, event->name))
+			return pos;
+	}
+	return NULL;
+}
+
+#define MAX_NR_ABBR_NAME	(26 * 11)
+
+/*
+ * The abbr name is from A to Z9. If the number of event
+ * which requires the branch counter > MAX_NR_ABBR_NAME,
+ * return NA.
+ */
+static void evlist__new_abbr_name(char *name)
+{
+	static int idx;
+	int i = idx / 26;
+
+	if (idx >= MAX_NR_ABBR_NAME) {
+		name[0] = 'N';
+		name[1] = 'A';
+		name[2] = '\0';
+		return;
+	}
+
+	name[0] = 'A' + (idx % 26);
+
+	if (!i)
+		name[1] = '\0';
+	else {
+		name[1] = '0' + i - 1;
+		name[2] = '\0';
+	}
+
+	idx++;
+}
+
 void evlist__update_br_cntr(struct evlist *evlist)
 {
-	struct evsel *evsel;
+	struct evsel *evsel, *dup;
 	int i = 0;
 
 	evlist__for_each_entry(evlist, evsel) {
 		if (evsel->core.attr.branch_sample_type & PERF_SAMPLE_BRANCH_COUNTERS) {
 			evsel->br_cntr_idx = i++;
 			evsel__leader(evsel)->br_cntr_nr++;
+
+			dup = evlist__find_dup_event_from_prev(evlist, evsel);
+			if (dup)
+				memcpy(evsel->abbr_name, dup->abbr_name, 3 * sizeof(char));
+			else
+				evlist__new_abbr_name(evsel->abbr_name);
 		}
 	}
 	evlist->nr_br_cntr = i;
tools/perf/util/evsel.h +6 -0
index a393dae1dc96..4316992f6a69 100644
@@ -153,9 +153,15 @@ struct evsel {
 	 * br_cntr_idx: The idx of the branch counter event in the evlist
 	 * br_cntr_nr:  The number of the branch counter event in the group
 	 *	        (Only available for the leader event)
+	 * abbr_name:   The abbreviation name assigned to an event which is
+	 *		logged by the branch counter.
+	 *		The abbr name is from A to Z9. NA is applied if out
+	 *		of the range.
 	 */
 	int			br_cntr_idx;
 	int			br_cntr_nr;
+	char			abbr_name[3];
+
 	/*
 	 * bpf_counter_ops serves two use cases:
 	 *   1. perf-stat -b          counting events used byBPF programs
Signature · 1 line
2.38.1
#6 lore raw

PATCH v2 6/9 perf report: Display the branch counter histogram

In reply to [email protected]

From: Kan Liang <[email protected]>

Reusing the existing --total-cycles option to display the branch counters. Add a new PERF_HPP_REPORT__BLOCK_BRANCH_COUNTER to display the logged branch counter events. They are shown right after all the cycle-related annotations.
Extend the struct block_info to store and pass the branch counter related information.

The annotation_br_cntr_entry() is to print the histogram of each branch counter event. If the number of logged events is less than 4, the exact number of the abbr name is printed. Otherwise, using '+' to stands for more than 3 events.

Assume the number of logged events is less than 4.

The annotation_br_cntr_abbr_list() prints the branch counter's abbreviation list. Press 'B' to display the list in the TUI mode.

$perf record -e "{branch-instructions:ppp,branch-misses}:S" -j any,counter $perf report --total-cycles --stdio

# To display the perf.data header info, please use --header/--header-only options. #
#
# Total Lost Samples: 0
#
# Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }' # Event count (approx.): 1610046
#
# Branch counter abbr list:
# branch-instructions:ppp = A

 # branch-misses = B
 # '-' No event occurs
 # '+' Event occurrences may be lost due to branch counter saturated
 #
 # Sampled Cycles%  Sampled Cycles  Avg Cycles%  Avg Cycles          Branch Counter [Program Block Range]
 # ...............  ..............  ...........  ..........  ......................  ..................
 #
           57.55%            2.5M        0.00%           3             |A   |-   |                 ...
           25.27%            1.1M        0.00%           2             |AA  |-   |                 ...
           15.61%          667.2K        0.00%           1             |A   |-   |                 ...
            0.16%            6.9K        0.81%         575             |A   |-   |                 ...
            0.16%            6.8K        1.38%         977             |AA  |-   |                 ...
            0.16%            6.8K        0.04%          28             |AA  |B   |                 ...
            0.15%            6.6K        1.33%         946             |A   |-   |                 ...
            0.11%            4.5K        0.06%          46             |AAA+|-   |                 ...
            0.10%            4.4K        0.88%         624             |A   |-   |                 ...
            0.09%            3.7K        0.74%         524             |AAA+|B   |                 ...

With -v applied,

 # Sampled Cycles%  Sampled Cycles  Avg Cycles%  Avg Cycles          Branch Counter [Program Block Range]
 # ...............  ..............  ...........  ..........  ......................  ..................
 #
           57.55%            2.5M        0.00%           3               A=1 ,B=-                  ...
           25.27%            1.1M        0.00%           2               A=2 ,B=-                  ...
           15.61%          667.2K        0.00%           1               A=1 ,B=-                  ...
            0.16%            6.9K        0.81%         575               A=1 ,B=-                  ...
            0.16%            6.8K        1.38%         977               A=2 ,B=-                  ...
            0.16%            6.8K        0.04%          28               A=2 ,B=1                  ...
            0.15%            6.6K        1.33%         946               A=1 ,B=-                  ...
            0.11%            4.5K        0.06%          46               A=3+,B=-                  ...
            0.10%            4.4K        0.88%         624               A=1 ,B=-                  ...
            0.09%            3.7K        0.74%         524               A=3+,B=1                  ...
---
 tools/perf/Documentation/perf-report.txt |   1 +
 tools/perf/builtin-diff.c                |   4 +-
 tools/perf/builtin-report.c              |  20 +++-
 tools/perf/ui/browsers/hists.c           |  17 ++-
 tools/perf/util/annotate.c               | 145 +++++++++++++++++++++++
 tools/perf/util/annotate.h               |   3 +
 tools/perf/util/block-info.c             |  66 +++++++++--
 tools/perf/util/block-info.h             |   8 +-
 8 files changed, 246 insertions(+), 18 deletions(-)
tools/perf/Documentation/perf-report.txt +1 -0
index d2b1593ef700..7c66d81ab978 100644
@@ -614,6 +614,7 @@ include::itrace.txt[]
 	'Avg Cycles%'     - block average sampled cycles / sum of total block average
 			    sampled cycles
 	'Avg Cycles'      - block average sampled cycles
+	'Branch Counter'  - block branch counter histogram (with -v showing the number)
 
 --skip-empty::
 	Do not print 0 results in the --stat output.
tools/perf/builtin-diff.c +2 -2
index 2d9226b1de52..de24892dc7b8 100644
@@ -705,7 +705,7 @@ static void hists__precompute(struct hists *hists)
 		if (compute == COMPUTE_CYCLES) {
 			bh = container_of(he, struct block_hist, he);
 			init_block_hist(bh);
-			block_info__process_sym(he, bh, NULL, 0);
+			block_info__process_sym(he, bh, NULL, 0, 0);
 		}
 
 		data__for_each_file_new(i, d) {
@@ -728,7 +728,7 @@ static void hists__precompute(struct hists *hists)
 				pair_bh = container_of(pair, struct block_hist,
 						       he);
 				init_block_hist(pair_bh);
-				block_info__process_sym(pair, pair_bh, NULL, 0);
+				block_info__process_sym(pair, pair_bh, NULL, 0, 0);
 
 				bh = container_of(he, struct block_hist, he);
 
tools/perf/builtin-report.c +16 -4
index 13b41c5f99ed..a8d0135166c0 100644
@@ -575,6 +575,13 @@ static int evlist__tty_browse_hists(struct evlist *evlist, struct report *rep, c
 		hists__fprintf_nr_sample_events(hists, rep, evname, stdout);
 
 		if (rep->total_cycles_mode) {
+			char *buf;
+
+			if (!annotation_br_cntr_abbr_list(&buf, pos, true)) {
+				fprintf(stdout, "%s", buf);
+				fprintf(stdout, "#\n");
+				free(buf);
+			}
 			report__browse_block_hists(&rep->block_reports[i - 1].hist,
 						   rep->min_percent, pos, NULL);
 			continue;
@@ -1120,18 +1127,23 @@ static int __cmd_report(struct report *rep)
 	report__output_resort(rep);
 
 	if (rep->total_cycles_mode) {
-		int block_hpps[6] = {
+		int nr_hpps = 4;
+		int block_hpps[PERF_HPP_REPORT__BLOCK_MAX_INDEX] = {
 			PERF_HPP_REPORT__BLOCK_TOTAL_CYCLES_PCT,
 			PERF_HPP_REPORT__BLOCK_LBR_CYCLES,
 			PERF_HPP_REPORT__BLOCK_CYCLES_PCT,
 			PERF_HPP_REPORT__BLOCK_AVG_CYCLES,
-			PERF_HPP_REPORT__BLOCK_RANGE,
-			PERF_HPP_REPORT__BLOCK_DSO,
 		};
 
+		if (session->evlist->nr_br_cntr > 0)
+			block_hpps[nr_hpps++] = PERF_HPP_REPORT__BLOCK_BRANCH_COUNTER;
+
+		block_hpps[nr_hpps++] = PERF_HPP_REPORT__BLOCK_RANGE;
+		block_hpps[nr_hpps++] = PERF_HPP_REPORT__BLOCK_DSO;
+
 		rep->block_reports = block_info__create_report(session->evlist,
 							       rep->total_cycles,
-							       block_hpps, 6,
+							       block_hpps, nr_hpps,
 							       &rep->nr_block_reports);
 		if (!rep->block_reports)
 			return -1;
tools/perf/ui/browsers/hists.c +16 -1
index b7219df51236..970f7f349298 100644
@@ -3684,8 +3684,10 @@ int block_hists_tui_browse(struct block_hist *bh, struct evsel *evsel,
 	struct hist_browser *browser;
 	int key = -1;
 	struct popup_action action;
+	char *br_cntr_text = NULL;
 	static const char help[] =
-	" q             Quit \n";
+	" q             Quit \n"
+	" B             Branch counter abbr list (Optional)\n";
 
 	browser = hist_browser__new(hists);
 	if (!browser)
@@ -3703,6 +3705,8 @@ int block_hists_tui_browse(struct block_hist *bh, struct evsel *evsel,
 
 	memset(&action, 0, sizeof(action));
 
+	annotation_br_cntr_abbr_list(&br_cntr_text, evsel, false);
+
 	while (1) {
 		key = hist_browser__run(browser, "? - help", true, 0);
 
@@ -3723,6 +3727,16 @@ int block_hists_tui_browse(struct block_hist *bh, struct evsel *evsel,
 			action.ms.sym = browser->selection->sym;
 			do_annotate(browser, &action);
 			continue;
+		case 'B':
+			if (br_cntr_text) {
+				ui__question_window("Branch counter abbr list",
+						    br_cntr_text, "Press any key...", 0);
+			} else {
+				ui__question_window("Branch counter abbr list",
+						    "\n The branch counter is not available.\n",
+						    "Press any key...", 0);
+			}
+			continue;
 		default:
 			break;
 		}
@@ -3730,5 +3744,6 @@ int block_hists_tui_browse(struct block_hist *bh, struct evsel *evsel,
 
 out:
 	hist_browser__delete(browser);
+	free(br_cntr_text);
 	return 0;
 }
tools/perf/util/annotate.c +145 -0

163 lines not on this page · raw message

tools/perf/util/annotate.h +3 -0
index 76ccb0e721c7..f0539001472e 100644
@@ -551,4 +551,7 @@ struct annotated_basic_block {
 int annotate_get_basic_blocks(struct symbol *sym, s64 src, s64 dst,
 			      struct list_head *head);
 
+int annotation_br_cntr_entry(char **str, int br_cntr_nr, u64 *br_cntr,
+			     int num_aggr, struct evsel *evsel);
+int annotation_br_cntr_abbr_list(char **str, struct evsel *evsel, bool header);
 #endif	/* __PERF_ANNOTATE_H */
tools/perf/util/block-info.c +57 -9

135 lines not on this page · raw message

tools/perf/util/block-info.h +6 -2
index 0b9e1aad4c55..b9329dc3ab59 100644
@@ -18,6 +18,9 @@ struct block_info {
 	u64			total_cycles;
 	int			num;
 	int			num_aggr;
+	int			br_cntr_nr;
+	u64			*br_cntr;
+	struct evsel		*evsel;
 };
 
 struct block_fmt {
@@ -36,6 +39,7 @@ enum {
 	PERF_HPP_REPORT__BLOCK_AVG_CYCLES,
 	PERF_HPP_REPORT__BLOCK_RANGE,
 	PERF_HPP_REPORT__BLOCK_DSO,
+	PERF_HPP_REPORT__BLOCK_BRANCH_COUNTER,
 	PERF_HPP_REPORT__BLOCK_MAX_INDEX
 };
 
@@ -46,7 +50,6 @@ struct block_report {
 	int			nr_fmts;
 };
 
-struct block_info *block_info__new(void);
 void block_info__delete(struct block_info *bi);
 
 int64_t __block_info__cmp(struct hist_entry *left, struct hist_entry *right);
@@ -55,7 +58,8 @@ int64_t block_info__cmp(struct perf_hpp_fmt *fmt __maybe_unused,
 			struct hist_entry *left, struct hist_entry *right);
 
 int block_info__process_sym(struct hist_entry *he, struct block_hist *bh,
-			    u64 *block_cycles_aggr, u64 total_cycles);
+			    u64 *block_cycles_aggr, u64 total_cycles,
+			    unsigned int br_cntr_nr);
 
 struct block_report *block_info__create_report(struct evlist *evlist,
 					       u64 total_cycles,
Signature · 1 line
2.38.1
#7 lore raw

PATCH v2 7/9 perf annotate: Display the branch counter histogram

In reply to [email protected]

From: Kan Liang <[email protected]>

Display the branch counter histogram in the annotation view.

Press 'B' to display the branch counter's abbreviation list as well.

Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }', 4000 Hz, Event count (approx.):
f3 /home/sdp/test/tchain_edit [Percent: local period]

Percent       │ IPC Cycle       Branch Counter (Average IPC: 1.39, IPC Coverage: 29.4%)
              │                                     0000000000401755 <f3>:
  0.00   0.00 │                                       endbr64
              │                                       push    %rbp
              │                                       mov     %rsp,%rbp
              │                                       movl    $0x0,-0x4(%rbp)
  0.00   0.00 │1.33     3          |A   |-   |      ↓ jmp     25
 11.03  11.03 │                                 11:   mov     -0x4(%rbp),%eax
              │                                       and     $0x1,%eax
              │                                       test    %eax,%eax
 17.13  17.13 │2.41     1          |A   |-   |      ↓ je      21
              │                                       addl    $0x1,-0x4(%rbp)
 21.84  21.84 │2.22     2          |AA  |-   |      ↓ jmp     25
 17.13  17.13 │                                 21:   addl    $0x1,-0x4(%rbp)
 21.84  21.84 │                                 25:   cmpl    $0x270f,-0x4(%rbp)
 11.03  11.03 │0.61     3          |A   |-   |      ↑ jle     11
              │                                       nop
              │                                       pop     %rbp
  0.00   0.00 │0.24    20          |AA  |B   |      ← ret
---
 tools/perf/builtin-annotate.c     | 10 +++++---
 tools/perf/ui/browsers/annotate.c | 18 ++++++++++++--
 tools/perf/ui/browsers/hists.c    |  3 ++-
 tools/perf/util/annotate.c        | 40 ++++++++++++++++++++++++++++---
 tools/perf/util/annotate.h        | 11 +++++++++
 tools/perf/util/disasm.c          |  1 +
 6 files changed, 74 insertions(+), 9 deletions(-)
tools/perf/builtin-annotate.c +7 -3
index dbe94441e4e9..a6388afcc773 100644
@@ -919,11 +919,15 @@ int cmd_annotate(int argc, const char **argv)
 		sort_order = "dso,symbol";
 
 	/*
-	 * Set SORT_MODE__BRANCH so that annotate display IPC/Cycle
-	 * if branch info is in perf data in TUI mode.
+	 * Set SORT_MODE__BRANCH so that annotate displays IPC/Cycle and
+	 * branch counters, if the corresponding branch info is available
+	 * in the perf data in the TUI mode.
 	 */
-	if ((use_browser == 1 || annotate.use_stdio2) && annotate.has_br_stack)
+	if ((use_browser == 1 || annotate.use_stdio2) && annotate.has_br_stack) {
 		sort__mode = SORT_MODE__BRANCH;
+		if (annotate.session->evlist->nr_br_cntr > 0)
+			annotate_opts.show_br_cntr = true;
+	}
 
 	if (setup_sorting(NULL) < 0)
 		usage_with_options(annotate_usage, options);
tools/perf/ui/browsers/annotate.c +16 -2
index fe991a81256b..d7e727345dab 100644
@@ -156,6 +156,7 @@ static void annotate_browser__draw_current_jump(struct ui_browser *browser)
 	struct symbol *sym = ms->sym;
 	struct annotation *notes = symbol__annotation(sym);
 	u8 pcnt_width = annotation__pcnt_width(notes);
+	u8 cntr_width = annotation__br_cntr_width();
 	int width;
 	int diff = 0;
 
@@ -205,13 +206,13 @@ static void annotate_browser__draw_current_jump(struct ui_browser *browser)
 
 	ui_browser__set_color(browser, HE_COLORSET_JUMP_ARROWS);
 	__ui_browser__line_arrow(browser,
-				 pcnt_width + 2 + notes->src->widths.addr + width,
+				 pcnt_width + 2 + notes->src->widths.addr + width + cntr_width,
 				 from, to);
 
 	diff = is_fused(ab, cursor);
 	if (diff > 0) {
 		ui_browser__mark_fused(browser,
-				       pcnt_width + 3 + notes->src->widths.addr + width,
+				       pcnt_width + 3 + notes->src->widths.addr + width + cntr_width,
 				       from - diff, diff, to > from);
 	}
 }
@@ -714,6 +715,7 @@ static int annotate_browser__run(struct annotate_browser *browser,
 	struct annotation *notes = symbol__annotation(ms->sym);
 	const char *help = "Press 'h' for help on key bindings";
 	int delay_secs = hbt ? hbt->refresh : 0;
+	char *br_cntr_text = NULL;
 	char title[256];
 	int key;
 
@@ -730,6 +732,8 @@ static int annotate_browser__run(struct annotate_browser *browser,
 
 	nd = browser->curr_hot;
 
+	annotation_br_cntr_abbr_list(&br_cntr_text, evsel, false);
+
 	while (1) {
 		key = ui_browser__run(&browser->b, delay_secs);
 
@@ -796,6 +800,7 @@ static int annotate_browser__run(struct annotate_browser *browser,
 		"r             Run available scripts\n"
 		"p             Toggle percent type [local/global]\n"
 		"b             Toggle percent base [period/hits]\n"
+		"B             Branch counter abbr list (Optional)\n"
 		"?             Search string backwards\n"
 		"f             Toggle showing offsets to full address\n");
 			continue;
@@ -904,6 +909,14 @@ static int annotate_browser__run(struct annotate_browser *browser,
 			hists__scnprintf_title(hists, title, sizeof(title));
 			annotate_browser__show(&browser->b, title, help);
 			continue;
+		case 'B':
+			if (br_cntr_text)
+				ui_browser__help_window(&browser->b, br_cntr_text);
+			else {
+				ui_browser__help_window(&browser->b,
+							"\n The branch counter is not available.\n");
+			}
+			continue;
 		case 'f':
 			annotation__toggle_full_addr(notes, ms);
 			continue;
@@ -923,6 +936,7 @@ static int annotate_browser__run(struct annotate_browser *browser,
 	}
 out:
 	ui_browser__hide(&browser->b);
+	free(br_cntr_text);
 	return key;
 }
 
tools/perf/ui/browsers/hists.c +2 -1
index 970f7f349298..49ba82bf3391 100644
@@ -3705,7 +3705,8 @@ int block_hists_tui_browse(struct block_hist *bh, struct evsel *evsel,
 
 	memset(&action, 0, sizeof(action));
 
-	annotation_br_cntr_abbr_list(&br_cntr_text, evsel, false);
+	if (!annotation_br_cntr_abbr_list(&br_cntr_text, evsel, false))
+		annotate_opts.show_br_cntr = true;
 
 	while (1) {
 		key = hist_browser__run(browser, "? - help", true, 0);
tools/perf/util/annotate.c +37 -3
index 0c19133133f2..e183dae3eab0 100644
@@ -500,8 +500,10 @@ static void annotation__count_and_fill(struct annotation *notes, u64 start, u64
 	}
 }
 
-static int annotation__compute_ipc(struct annotation *notes, size_t size)
+static int annotation__compute_ipc(struct annotation *notes, size_t size,
+				   struct evsel *evsel)
 {
+	unsigned int br_cntr_nr = evsel->evlist->nr_br_cntr;
 	int err = 0;
 	s64 offset;
 
@@ -536,6 +538,20 @@ static int annotation__compute_ipc(struct annotation *notes, size_t size)
 				al->cycles->max = ch->cycles_max;
 				al->cycles->min = ch->cycles_min;
 			}
+			if (al && notes->branch->br_cntr) {
+				if (!al->br_cntr) {
+					al->br_cntr = calloc(br_cntr_nr, sizeof(u64));
+					if (!al->br_cntr) {
+						err = ENOMEM;
+						break;
+					}
+				}
+				al->num_aggr = ch->num_aggr;
+				al->br_cntr_nr = br_cntr_nr;
+				al->evsel = evsel;
+				memcpy(al->br_cntr, &notes->branch->br_cntr[offset * br_cntr_nr],
+				       br_cntr_nr * sizeof(u64));
+			}
 		}
 	}
 
@@ -547,8 +563,10 @@ static int annotation__compute_ipc(struct annotation *notes, size_t size)
 				struct annotation_line *al;
 
 				al = annotated_source__get_line(notes->src, offset);
-				if (al)
+				if (al) {
 					zfree(&al->cycles);
+					zfree(&al->br_cntr);
+				}
 			}
 		}
 	}
@@ -1959,6 +1977,22 @@ static void __annotation_line__write(struct annotation_line *al, struct annotati
 					    "Cycle(min/max)");
 		}
 
+		if (annotate_opts.show_br_cntr) {
+			if (show_title) {
+				obj__printf(obj, "%*s ",
+					    ANNOTATION__BR_CNTR_WIDTH,
+					    "Branch Counter");
+			} else {
+				char *buf;
+
+				if (!annotation_br_cntr_entry(&buf, al->br_cntr_nr, al->br_cntr,
+							      al->num_aggr, al->evsel)) {
+					obj__printf(obj, "%*s ", ANNOTATION__BR_CNTR_WIDTH, buf);
+					free(buf);
+				}
+			}
+		}
+
 		if (show_title && !*al->line) {
 			ipc_coverage_string(bf, sizeof(bf), notes);
 			obj__printf(obj, "%*s", ANNOTATION__AVG_IPC_WIDTH, bf);
@@ -2055,7 +2089,7 @@ int symbol__annotate2(struct map_symbol *ms, struct evsel *evsel,
 	annotation__set_index(notes);
 	annotation__mark_jump_targets(notes, sym);
 
-	err = annotation__compute_ipc(notes, size);
+	err = annotation__compute_ipc(notes, size, evsel);
 	if (err)
 		return err;
 
tools/perf/util/annotate.h +11 -0
index f0539001472e..8556f606409e 100644
@@ -31,6 +31,7 @@ struct annotated_data_type;
 #define ANNOTATION__CYCLES_WIDTH 6
 #define ANNOTATION__MINMAX_CYCLES_WIDTH 19
 #define ANNOTATION__AVG_IPC_WIDTH 36
+#define ANNOTATION__BR_CNTR_WIDTH 30
 #define ANNOTATION_DUMMY_LEN	256
 
 struct annotation_options {
@@ -44,6 +45,7 @@ struct annotation_options {
 	     show_nr_jumps,
 	     show_minmax_cycle,
 	     show_asm_raw,
+	     show_br_cntr,
 	     annotate_src,
 	     full_addr;
 	u8   offset_level;
@@ -104,6 +106,10 @@ struct annotation_line {
 	char			*fileloc;
 	char			*path;
 	struct cycles_info	*cycles;
+	int			 num_aggr;
+	int			 br_cntr_nr;
+	u64			*br_cntr;
+	struct evsel		*evsel;
 	int			 jump_sources;
 	u32			 idx;
 	int			 idx_asm;
@@ -353,6 +359,11 @@ static inline bool annotation_line__filter(struct annotation_line *al)
 	return annotate_opts.hide_src_code && al->offset == -1;
 }
 
+static inline u8 annotation__br_cntr_width(void)
+{
+	return annotate_opts.show_br_cntr ? ANNOTATION__BR_CNTR_WIDTH : 0;
+}
+
 void annotation__update_column_widths(struct annotation *notes);
 void annotation__toggle_full_addr(struct annotation *notes, struct map_symbol *ms);
 
tools/perf/util/disasm.c +1 -0
index 22289003e16d..68aae87101bd 100644
@@ -1014,6 +1014,7 @@ static void annotation_line__exit(struct annotation_line *al)
 	zfree_srcline(&al->path);
 	zfree(&al->line);
 	zfree(&al->cycles);
+	zfree(&al->br_cntr);
 }
 
 static size_t disasm_line_size(int nr)
Signature · 1 line
2.38.1
#8 lore raw

PATCH v2 8/9 perf script: Add branch counters

In reply to [email protected]

From: Kan Liang <[email protected]>

It's useful to print the branch counter information for each jump in the brstackinsn when it's available.

Add a new field brcntr to display the branch counter information.

By default, the abbreviation will be used to indicate the branch counter. In the verbose mode, the real event name is shown.

$perf script -F +brstackinsn,+brcntr

# Branch counter abbr list:
# branch-instructions:ppp = A

 # branch-misses = B
 # '-' No event occurs
 # '+' Event occurrences may be lost due to branch counter saturated
     tchain_edit  332203 3366329.405674:      53030 branch-instructions:ppp:            401781 f3+0x2c (home/sdp/test/tchain_edit)
        f3+31:
        0000000000401774        insn: eb 04                     br_cntr: AA     # PRED 5 cycles [5]
        000000000040177a        insn: 81 7d fc 0f 27 00 00
        0000000000401781        insn: 7e e3                     br_cntr: A      # PRED 1 cycles [6] 2.00 IPC
        0000000000401766        insn: 8b 45 fc
        0000000000401769        insn: 83 e0 01
        000000000040176c        insn: 85 c0
        000000000040176e        insn: 74 06                     br_cntr: A      # PRED 1 cycles [7] 4.00 IPC
        0000000000401776        insn: 83 45 fc 01
        000000000040177a        insn: 81 7d fc 0f 27 00 00
        0000000000401781        insn: 7e e3                     br_cntr: A      # PRED 7 cycles [14] 0.43 IPC

$perf script -F +brstackinsn,+brcntr -v

     tchain_edit  332203 3366329.405674:      53030 branch-instructions:ppp:            401781 f3+0x2c (/home/sdp/os.linux.perf.test-suite/kernels/lbr_kernel/tchain_edit)
        f3+31:
        0000000000401774        insn: eb 04                     br_cntr: branch-instructions:ppp 2 branch-misses 0      # PRED 5 cycles [5]
        000000000040177a        insn: 81 7d fc 0f 27 00 00
        0000000000401781        insn: 7e e3                     br_cntr: branch-instructions:ppp 1 branch-misses 0      # PRED 1 cycles [6] 2.00 IPC
        0000000000401766        insn: 8b 45 fc
        0000000000401769        insn: 83 e0 01
        000000000040176c        insn: 85 c0
        000000000040176e        insn: 74 06                     br_cntr: branch-instructions:ppp 1 branch-misses 0      # PRED 1 cycles [7] 4.00 IPC
        0000000000401776        insn: 83 45 fc 01
        000000000040177a        insn: 81 7d fc 0f 27 00 00
        0000000000401781        insn: 7e e3                     br_cntr: branch-instructions:ppp 1 branch-misses 0      # PRED 7 cycles [14] 0.43 IPC
---
 tools/perf/Documentation/perf-script.txt |  2 +-
 tools/perf/builtin-script.c              | 69 +++++++++++++++++++++---
 2 files changed, 63 insertions(+), 8 deletions(-)
tools/perf/Documentation/perf-script.txt +1 -1
index ff086ef05a0c..be483c904d8d 100644
@@ -134,7 +134,7 @@ OPTIONS
         srcline, period, iregs, uregs, brstack, brstacksym, flags, bpf-output,
         brstackinsn, brstackinsnlen, brstackdisasm, brstackoff, callindent, insn, disasm,
         insnlen, synth, phys_addr, metric, misc, srccode, ipc, data_page_size,
-        code_page_size, ins_lat, machine_pid, vcpu, cgroup, retire_lat,
+        code_page_size, ins_lat, machine_pid, vcpu, cgroup, retire_lat, brcntr,
 
         Field list can be prepended with the type, trace, sw or hw,
         to indicate to which event type the field list applies.
tools/perf/builtin-script.c +62 -7

172 lines not on this page · raw message

Signature · 1 line
2.38.1
#9 lore raw

PATCH v2 9/9 perf test: Add new test cases for the branch counter feature

In reply to [email protected]

From: Kan Liang <[email protected]>

Enhance the test case for the branch counter feature.

Now, the test verifies
- The new filter can be successfully applied on the supported platforms.
- The counter value can be outputted via the perf report -D
- The counter value and the abbr name can be outputted via the perf script (New)

---
 tools/perf/tests/shell/record.sh | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
tools/perf/tests/shell/record.sh +12 -5
index 3d1a7759a7b2..7964ebd9007d 100755
@@ -21,6 +21,7 @@ testprog="perf test -w thloop"
 cpu_pmu_dir="/sys/bus/event_source/devices/cpu*"
 br_cntr_file="/caps/branch_counter_nr"
 br_cntr_output="branch stack counters"
+br_cntr_script_output="br_cntr: A"
 
 cleanup() {
   rm -rf "${perfdata}"
@@ -165,7 +166,7 @@ test_workload() {
 }
 
 test_branch_counter() {
-  echo "Basic branch counter test"
+  echo "Branch counter test"
   # Check if the branch counter feature is supported
   for dir in $cpu_pmu_dir
   do
@@ -175,19 +176,25 @@ test_branch_counter() {
       return
     fi
   done
-  if ! perf record -o "${perfdata}" -j any,counter ${testprog} 2> /dev/null
+  if ! perf record -o "${perfdata}" -e "{branches:p,instructions}" -j any,counter ${testprog} 2> /dev/null
   then
-    echo "Basic branch counter test [Failed record]"
+    echo "Branch counter record test [Failed record]"
     err=1
     return
   fi
   if ! perf report -i "${perfdata}" -D -q | grep -q "$br_cntr_output"
   then
-    echo "Basic branch record test [Failed missing output]"
+    echo "Branch counter report test [Failed missing output]"
     err=1
     return
   fi
-  echo "Basic branch counter test [Success]"
+  if ! perf script -i "${perfdata}" -F +brstackinsn,+brcntr | grep -q "$br_cntr_script_output"
+  then
+    echo " Branch counter script test [Failed missing output]"
+    err=1
+    return
+  fi
+  echo "Branch counter test [Success]"
 }
 
 test_per_thread
Signature · 1 line
2.38.1
maintainer Acked-by on the v2 series
#11 lore raw
In reply to [email protected]

Hello,

Quoted 130 lines · On Thu, Aug 08, 2024 at 12:33:15PM -0700, [email protected] wrote:

From: Kan Liang <[email protected]>

Changes since V1:
- Add Acked-by from Namhyung for patch 1 and 2.
- Use array to replace pointer to store the abbr name. (Patch 5) (Namhyung)
- Add -v to print the value like "A=<n>,B=<n>", rather than histogram. (Patch 6) (Namhyung)

The branch counters logging (A.K.A LBR event logging) introduces a per-counter indication of precise event occurrences in LBRs. It can provide a means to attribute exposed retirement latency to combinations of events across a block of instructions. It also provides a means of attributing Timed LBR latencies to events.

The kernel support and basic perf tool support have been merged.
https://lore.kernel.org/lkml/[email protected]/

This series is to provide advanced perf tool support via adding the branch counters information in block annotation. It can further facilitate the analysis of branch blocks.

The patch 1 and 2 are to fix two existing issues of --total-cycles and the branch counters feature.

The patch 3-9 are the advanced perf tool support.

Here are some examples.

perf annotation:

$perf record -e "{branch-instructions:ppp,branch-misses}:S" -j any,counter $perf report --total-cycles --stdio

# To display the perf.data header info, please use --header/--header-only options. #
#
# Total Lost Samples: 0
#
# Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }' # Event count (approx.): 1610046
#
# Branch counter abbr list:
# branch-instructions:ppp = A

 # branch-misses = B
 # '-' No event occurs
 # '+' Event occurrences may be lost due to branch counter saturated
 #
 # Sampled Cycles%  Sampled Cycles  Avg Cycles%  Avg Cycles          Branch Counter [Program Block Range]
 # ...............  ..............  ...........  ..........  ......................  ..
 #
           57.55%            2.5M        0.00%           3             |A   |-   |                 ...
           25.27%            1.1M        0.00%           2             |AA  |-   |                 ...
           15.61%          667.2K        0.00%           1             |A   |-   |                 ...
            0.16%            6.9K        0.81%         575             |A   |-   |                 ...
            0.16%            6.8K        1.38%         977             |AA  |-   |                 ...
            0.16%            6.8K        0.04%          28             |AA  |B   |                 ...
            0.15%            6.6K        1.33%         946             |A   |-   |                 ...
            0.11%            4.5K        0.06%          46             |AAA+|-   |                 ...

With -v applied,
$perf report --total-cycles --stdio -v

 # Sampled Cycles%  Sampled Cycles  Avg Cycles%  Avg Cycles          Branch Counter [Program Block Range]
 # ...............  ..............  ...........  ..........  ......................  ..................
 #
           57.55%            2.5M        0.00%           3               A=1 ,B=-                  ...
           25.27%            1.1M        0.00%           2               A=2 ,B=-                  ...
           15.61%          667.2K        0.00%           1               A=1 ,B=-                  ...
            0.16%            6.9K        0.81%         575               A=1 ,B=-                  ...
            0.16%            6.8K        1.38%         977               A=2 ,B=-                  ...
            0.16%            6.8K        0.04%          28               A=2 ,B=1                  ...
            0.15%            6.6K        1.33%         946               A=1 ,B=-                  ...
            0.11%            4.5K        0.06%          46               A=3+,B=-                  ...

(The below output is in the TUI mode. Users can press 'B' to display the Branch counter abbr list.)

Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }', 4000 Hz, Event count (approx.):
f3 /home/sdp/test/tchain_edit [Percent: local period]

Percent       │ IPC Cycle       Branch Counter (Average IPC: 1.39, IPC Coverage: 29.4%)
              │                                     0000000000401755 <f3>:
  0.00   0.00 │                                       endbr64
              │                                       push    %rbp
              │                                       mov     %rsp,%rbp
              │                                       movl    $0x0,-0x4(%rbp)
  0.00   0.00 │1.33     3          |A   |-   |      ↓ jmp     25
 11.03  11.03 │                                 11:   mov     -0x4(%rbp),%eax
              │                                       and     $0x1,%eax
              │                                       test    %eax,%eax
 17.13  17.13 │2.41     1          |A   |-   |      ↓ je      21
              │                                       addl    $0x1,-0x4(%rbp)
 21.84  21.84 │2.22     2          |AA  |-   |      ↓ jmp     25
 17.13  17.13 │                                 21:   addl    $0x1,-0x4(%rbp)
 21.84  21.84 │                                 25:   cmpl    $0x270f,-0x4(%rbp)
 11.03  11.03 │0.61     3          |A   |-   |      ↑ jle     11
              │                                       nop
              │                                       pop     %rbp
  0.00   0.00 │0.24    20          |AA  |B   |      ← ret

perf script:

$perf script -F +brstackinsn,+brcntr

# Branch counter abbr list:
# branch-instructions:ppp = A

 # branch-misses = B
 # '-' No event occurs
 # '+' Event occurrences may be lost due to branch counter saturated
     tchain_edit  332203 3366329.405674:      53030 branch-instructions:ppp:            401781 f3+0x2c (home/sdp/test/tchain_edit)
        f3+31:
        0000000000401774        insn: eb 04                     br_cntr: AA     # PRED 5 cycles [5]
        000000000040177a        insn: 81 7d fc 0f 27 00 00
        0000000000401781        insn: 7e e3                     br_cntr: A      # PRED 1 cycles [6] 2.00 IPC
        0000000000401766        insn: 8b 45 fc
        0000000000401769        insn: 83 e0 01
        000000000040176c        insn: 85 c0

$perf script -F +brstackinsn,+brcntr -v

     tchain_edit  332203 3366329.405674:      53030 branch-instructions:ppp:            401781 f3+0x2c (/home/sdp/test/tchain_edit)
        f3+31:
        0000000000401774        insn: eb 04                     br_cntr: branch-instructions:ppp 2 branch-misses 0      # PRED 5 cycles [5]
        000000000040177a        insn: 81 7d fc 0f 27 00 00
        0000000000401781        insn: 7e e3                     br_cntr: branch-instructions:ppp 1 branch-misses 0      # PRED 1 cycles [6] 2.00 IPC
        0000000000401766        insn: 8b 45 fc
        0000000000401769        insn: 83 e0 01
        000000000040176c        insn: 85 c0
Quoted 10 lines

Kan Liang (9):
perf report: Fix --total-cycles --stdio output error perf report: Remove the first overflow check for branch counters perf evlist: Save branch counters information
perf annotate: Save branch counters for each block perf evsel: Assign abbr name for the branch counter events perf report: Display the branch counter histogram perf annotate: Display the branch counter histogram perf script: Add branch counters
perf test: Add new test cases for the branch counter feature

Thanks,
Namhyung

Quoted 29 lines
 tools/perf/Documentation/perf-report.txt |   1 +
 tools/perf/Documentation/perf-script.txt |   2 +-
 tools/perf/builtin-annotate.c            |  13 +-
 tools/perf/builtin-diff.c                |   8 +-
 tools/perf/builtin-report.c              |  25 ++-
 tools/perf/builtin-script.c              |  69 ++++++-
 tools/perf/builtin-top.c                 |   4 +-
 tools/perf/tests/shell/record.sh         |  17 +-
 tools/perf/ui/browsers/annotate.c        |  18 +-
 tools/perf/ui/browsers/hists.c           |  18 +-
 tools/perf/util/annotate.c               | 253 +++++++++++++++++++++--
 tools/perf/util/annotate.h               |  24 ++-
 tools/perf/util/block-info.c             |  66 +++++-
 tools/perf/util/block-info.h             |   8 +-
 tools/perf/util/branch.h                 |   1 +
 tools/perf/util/disasm.c                 |   1 +
 tools/perf/util/evlist.c                 |  68 ++++++
 tools/perf/util/evlist.h                 |   2 +
 tools/perf/util/evsel.c                  |  15 +-
 tools/perf/util/evsel.h                  |  14 ++
 tools/perf/util/hist.c                   |   5 +-
 tools/perf/util/hist.h                   |   2 +-
 tools/perf/util/machine.c                |   3 +
 23 files changed, 567 insertions(+), 70 deletions(-)
Signature · 1 line
2.38.1
#12 lore raw
Quoted 13 lines · Namhyung Kim
Quoted 11 lines · On Thu, Aug 08, 2024 at 12:33:15PM -0700, [email protected] wrote:

From: Kan Liang <[email protected]>
Kan Liang (9):
perf report: Fix --total-cycles --stdio output error perf report: Remove the first overflow check for branch counters perf evlist: Save branch counters information
perf annotate: Save branch counters for each block perf evsel: Assign abbr name for the branch counter events perf report: Display the branch counter histogram perf annotate: Display the branch counter histogram perf script: Add branch counters
perf test: Add new test cases for the branch counter feature

Quoted 1 line

Clashed with something here, can you please take a look and rebase to what is in perf-tools-next/perf-tools-next?

- Arnaldo

✓ [PATCH v2 9/9] perf test: Add new test cases for the branch counter feature
+ Acked-by: Namhyung Kim <[email protected]> (✓ DKIM/kernel.org)
+ Reviewed-by: Andi Kleen <[email protected]> (✓ DKIM/intel.com)
+ Link: https://lore.kernel.org/r/[email protected]
+ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
---
✓ Signed: DKIM/intel.com (From: [email protected])
---
Total patches: 9
---
Cover: ./v2_20240808_kan_liang_support_branch_counters_in_block_annotation.cover

Base: not specified

       git am ./v2_20240808_kan_liang_support_branch_counters_in_block_annotation.mbx

⬢[acme@toolbox perf-tools-next]$ git am ./v2_20240808_kan_liang_support_branch_counters_in_block_annotation.mbx
Applying: perf report: Fix --total-cycles --stdio output error
Applying: perf report: Remove the first overflow check for branch counters
Applying: perf evlist: Save branch counters information
Applying: perf annotate: Save branch counters for each block
Applying: perf evsel: Assign abbr name for the branch counter events
Applying: perf report: Display the branch counter histogram
error: patch failed: tools/perf/util/annotate.h:551
error: tools/perf/util/annotate.h: patch does not apply
Patch failed at 0006 perf report: Display the branch counter histogram
hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". ⬢[acme@toolbox perf-tools-next]$

author
#13 lore raw
Quoted 14 lines · Arnaldo Carvalho de Melo
Quoted 13 lines · Namhyung Kim
Quoted 11 lines · On Thu, Aug 08, 2024 at 12:33:15PM -0700, [email protected] wrote:

From: Kan Liang <[email protected]>
Kan Liang (9):
perf report: Fix --total-cycles --stdio output error perf report: Remove the first overflow check for branch counters perf evlist: Save branch counters information
perf annotate: Save branch counters for each block perf evsel: Assign abbr name for the branch counter events perf report: Display the branch counter histogram perf annotate: Display the branch counter histogram perf script: Add branch counters
perf test: Add new test cases for the branch counter feature

Quoted 4 lines
Quoted 1 line

Clashed with something here, can you please take a look and rebase to what is in perf-tools-next/perf-tools-next?

Tools-next/perf-tools-next doesn't include Weilin's TPEBS patch. So I fail at the patch 5, rather than patch 6 (the failure you observed.)

Can you please update the perf-tools-next?
Or should I re-base on top of the tmp.perf-tools-next?

$ git branch -v
  master              1639fae5132b Merge tag 'drm-fixes-2023-06-17' of
git://anongit.freedesktop.org/drm/drm
* perf-tools-next     cb1898f58e0f perf annotate-data: Support
--skip-empty option
  tmp.perf-tools-next 9da782071202 perf test: Add test for Intel TPEBS
counting mode
$ git branch --show-current
perf-tools-next
$ git am lbr_event_logging_v2/000*
Applying: perf report: Fix --total-cycles --stdio output error
Applying: perf report: Remove the first overflow check for branch counters
Applying: perf evlist: Save branch counters information
Applying: perf annotate: Save branch counters for each block
Applying: perf evsel: Assign abbr name for the branch counter events
error: patch failed: tools/perf/util/evlist.c:33
error: tools/perf/util/evlist.c: patch does not apply
Patch failed at 0005 perf evsel: Assign abbr name for the branch counter
events

Thanks,
Kan

Quoted 32 lines

- Arnaldo

✓ [PATCH v2 9/9] perf test: Add new test cases for the branch counter feature
+ Acked-by: Namhyung Kim <[email protected]> (✓ DKIM/kernel.org)
+ Reviewed-by: Andi Kleen <[email protected]> (✓ DKIM/intel.com)
+ Link: https://lore.kernel.org/r/[email protected]
+ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
---
✓ Signed: DKIM/intel.com (From: [email protected])
---
Total patches: 9
---
Cover: ./v2_20240808_kan_liang_support_branch_counters_in_block_annotation.cover

Base: not specified

       git am ./v2_20240808_kan_liang_support_branch_counters_in_block_annotation.mbx

⬢[acme@toolbox perf-tools-next]$ git am ./v2_20240808_kan_liang_support_branch_counters_in_block_annotation.mbx
Applying: perf report: Fix --total-cycles --stdio output error
Applying: perf report: Remove the first overflow check for branch counters
Applying: perf evlist: Save branch counters information
Applying: perf annotate: Save branch counters for each block
Applying: perf evsel: Assign abbr name for the branch counter events
Applying: perf report: Display the branch counter histogram
error: patch failed: tools/perf/util/annotate.h:551
error: tools/perf/util/annotate.h: patch does not apply
Patch failed at 0006 perf report: Display the branch counter histogram
hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". ⬢[acme@toolbox perf-tools-next]$

#14 lore raw
Quoted 19 lines · Kan
Quoted 16 lines · Arnaldo Carvalho de Melo
Quoted 14 lines · Namhyung Kim
Quoted 11 lines · On Thu, Aug 08, 2024 at 12:33:15PM -0700, [email protected] wrote:

From: Kan Liang <[email protected]>
Kan Liang (9):
perf report: Fix --total-cycles --stdio output error perf report: Remove the first overflow check for branch counters perf evlist: Save branch counters information
perf annotate: Save branch counters for each block perf evsel: Assign abbr name for the branch counter events perf report: Display the branch counter histogram perf annotate: Display the branch counter histogram perf script: Add branch counters
perf test: Add new test cases for the branch counter feature

Quoted 8 lines
Quoted 2 lines

Clashed with something here, can you please take a look and rebase to what is in perf-tools-next/perf-tools-next?

Tools-next/perf-tools-next doesn't include Weilin's TPEBS patch. So I fail at the patch 5, rather than patch 6 (the failure you observed.)

Can you please update the perf-tools-next?
Or should I re-base on top of the tmp.perf-tools-next?

Do it over tmp.perf-tools-next please this time.

- Arnaldo

Quoted 56 lines
$ git branch -v
  master              1639fae5132b Merge tag 'drm-fixes-2023-06-17' of
git://anongit.freedesktop.org/drm/drm
* perf-tools-next     cb1898f58e0f perf annotate-data: Support
--skip-empty option
  tmp.perf-tools-next 9da782071202 perf test: Add test for Intel TPEBS
counting mode
$ git branch --show-current
perf-tools-next
$ git am lbr_event_logging_v2/000*
Applying: perf report: Fix --total-cycles --stdio output error
Applying: perf report: Remove the first overflow check for branch counters
Applying: perf evlist: Save branch counters information
Applying: perf annotate: Save branch counters for each block
Applying: perf evsel: Assign abbr name for the branch counter events
error: patch failed: tools/perf/util/evlist.c:33
error: tools/perf/util/evlist.c: patch does not apply
Patch failed at 0005 perf evsel: Assign abbr name for the branch counter
events

Thanks,
Kan

Quoted 32 lines

- Arnaldo

✓ [PATCH v2 9/9] perf test: Add new test cases for the branch counter feature
+ Acked-by: Namhyung Kim <[email protected]> (✓ DKIM/kernel.org)
+ Reviewed-by: Andi Kleen <[email protected]> (✓ DKIM/intel.com)
+ Link: https://lore.kernel.org/r/[email protected]
+ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
---
✓ Signed: DKIM/intel.com (From: [email protected])
---
Total patches: 9
---
Cover: ./v2_20240808_kan_liang_support_branch_counters_in_block_annotation.cover

Base: not specified

       git am ./v2_20240808_kan_liang_support_branch_counters_in_block_annotation.mbx

⬢[acme@toolbox perf-tools-next]$ git am ./v2_20240808_kan_liang_support_branch_counters_in_block_annotation.mbx
Applying: perf report: Fix --total-cycles --stdio output error
Applying: perf report: Remove the first overflow check for branch counters
Applying: perf evlist: Save branch counters information
Applying: perf annotate: Save branch counters for each block
Applying: perf evsel: Assign abbr name for the branch counter events
Applying: perf report: Display the branch counter histogram
error: patch failed: tools/perf/util/annotate.h:551
error: tools/perf/util/annotate.h: patch does not apply
Patch failed at 0006 perf report: Display the branch counter histogram
hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". ⬢[acme@toolbox perf-tools-next]$