drm/vkms: Reimplement line-per-line pixel conversion for plane reading
Louis Chauvet
maintainerv10 cover drm/vkms: Reimplement line-per-line pixel conversion for plane reading
This patchset is the second version of [1]. It is almost a complete rewrite to use a line-by-line algorithm for the composition.
During the development of this series Pekka and Arthur found an issue in drm core. The YUV part of this series depend on the fix [9]. I'll let Arthur extract it and submit a new independant patch.
It can be divided in three parts:
- PATCH 1 to 4: no functional change is intended, only some formatting and documenting (PATCH 2 is taken from [2])
- PATCH 5 to 7: Some preparation work not directly related to the line-by-line algorithm
- PATCH 9: main patch for this series, it reintroduce the line-by-line algorithm
- PATCH 10: Remove useless drm_simplify_rotation
- PATCH 11 to 16: taken from Arthur's series [2], with sometimes adaptation to use the pixel-by-pixel algorithm.
- PATCH 16: Introduce the support for DRM_FORMAT_R1/2/4/8
The PATCH 9 aims to restore the line-by-line pixel reading algorithm. It was introduced in 8ba1648567e2 ("drm: vkms: Refactor the plane composer to accept new formats") but removed in 8ba1648567e2 ("drm: vkms: Refactor the plane composer to accept new formats") in a over-simplification effort. At this time, nobody noticed the performance impact of this commit. After the first iteration of my series, poeple notice performance impact, and it was the case. Pekka suggested to reimplement the line-by-line algorithm.
Expiriments on my side shown great improvement for the line-by-line algorithm, and the performances are the same as the original line-by-line algorithm. I targeted my effort to make the code working for all the rotations and translations. The usage of helpers from drm_rect_* avoid reimplementing existing logic.
The only "complex" part remaining is the clipping of the coordinate to avoid reading/writing outside of src/dst. Thus I added a lot of comments to help when someone will want to add some features (framebuffer resizing for example).
The YUV part is not mandatory for this series, but as my first effort was to help the integration of YUV, I decided to rebase Arthur's series on mine to help. I took [3], [4], [5] and [6] and adapted them to use the line-by-line reading. They were also updated to use 32.32 fixed point values for yuv conversion instead of 8.8 fixed points.
The last patch of this series introduce DRM_FORMAT_R1/2/4/8 to show how the PATCH 7/16 can be used to manage packed pixel formats.
To properly test the rotation algorithm, I had to implement a new IGT test [8]. This helped to found one issue in the YUV rotation algortihm.
My series was mainly tested with:
- kms_plane (for color conversions)
- kms_rotation_crc (for a subset of rotation and formats)
- kms_rotation (to test all rotation and formats combinations) [8]
- kms_cursor_crc (for translations)
The benchmark used to measure the improvment was done with kms_fb_stress [10] with some modifications:
- Fixing the writeback format to XRGB8888
- Using a primary plane with odd dimension to avoid failures due to YUV alignment
The KMs structure was:
CRTC: rectangle: 4096x2160+0+0 primary: format: ABGR16161616 rectangle: 3640x2160+101+0 writeback: format: XRGB8888 rectangle: 4096x2160+0+0
Results (on my computer):
8356b9790650: drm/test: Add test cases for drm_rect_rotate_inv() (before any regression) 322d716a3e8a: drm/vkms: isolate pixel conversion functionality (first regression)cc4fd2934d41: drm/vkms: Isolate writeback pixel conversion functions (second regression) 2c3d1bd284c5: drm/panel: simple: Add Microtips Technology MF-103HIEB0GA0 panel (current drm-misc-next)
Used format | This series | 2c3d1bd284c5 | cc4fd2934d41 | 322d716a3e8a | 8356b9790650 |
--------------+-------------+--------------+--------------+--------------+--------------+
XRGB8888 | 13.261666s | 14.289582s | 10.731272s | 9.480001s | 9.277507s | XRGB16161616 | 13.282479s | 13.918926s | 10.712616s | 9.776903s | 9.291766s | RGB565 | 136.154163s | 141.646489s | 101.744050s | 103.712164s | 87.860923s |
This is a 5-10% improvment of the performance. More work need to be done on the writeback to gain more.
[1]: https://lore.kernel.org/all/[email protected]
[2]: https://lore.kernel.org/all/[email protected]/
[3]: https://lore.kernel.org/all/[email protected]/
[4]: https://lore.kernel.org/all/[email protected]/
[5]: https://lore.kernel.org/all/[email protected]/
[6]: https://lore.kernel.org/all/[email protected]/
[8]: https://lore.kernel.org/r/[email protected]
[9]: https://lore.kernel.org/dri-devel/[email protected]/
[10]: https://lore.kernel.org/all/[email protected]/
To: Rodrigo Siqueira <[email protected]>
To: Melissa Wen <[email protected]>
To: Maíra Canal <[email protected]>
To: Haneen Mohammed <[email protected]>
To: Daniel Vetter <[email protected]>
To: Maarten Lankhorst <[email protected]>
To: Maxime Ripard <[email protected]>
To: Thomas Zimmermann <[email protected]>
To: David Airlie <[email protected]>
To: [email protected]
To: [email protected]
To: Jonathan Corbet <[email protected]>
To: [email protected]
Note: after my changes, those tests seems to pass, so [7] may need updating (I did not check, it was maybe already the case):
- kms_cursor_legacy@flip-vs-cursor-atomic
- kms_pipe_crc_basic@nonblocking-crc
- kms_pipe_crc_basic@nonblocking-crc-frame-sequence
- kms_writeback@writeback-pixel-formats
- kms_writeback@writeback-invalid-parameters
- kms_flip@flip-vs-absolute-wf_vblank-interruptible
And those tests pass, I did not investigate why the runners fails:
- kms_flip@flip-vs-expired-vblank-interruptible
- kms_flip@flip-vs-expired-vblank
- kms_flip@plain-flip-fb-recreate
- kms_flip@plain-flip-fb-recreate-interruptible
- kms_flip@plain-flip-ts-check-interruptible
- kms_cursor_legacy@cursorA-vs-flipA-toggle
- kms_pipe_crc_basic@nonblocking-crc
- kms_prop_blob@invalid-get-prop
- kms_flip@flip-vs-absolute-wf_vblank-interruptible
- kms_invalid_mode@zero-hdisplay
- kms_invalid_mode@bad-vtotal
- kms_cursor_crc.* (everything is SUCCEED or SKIP, except for rapid_movement)
[7]: https://lore.kernel.org/all/[email protected]/
Changes in v10:
- Properly remove the patch introducing dummy read/write functions
- PATCH 8/16: Format fixups
- PATCH 9/16: Format fixups
- PATCH 11/16: Format fixups
- PATCH 14/16: Fix test compilation, add module description
- Link to v9: https://lore.kernel.org/r/[email protected]
Changes in v9:
- PATCH 3/17: Fix docs as Maíra suggested
- PATCH 4,6,10,12,15,17/17: Fix sparse warning about __le16 casting
- Link to v8: https://lore.kernel.org/all/[email protected]/
Changes in v8:
- PATCH 7/17: Update pitch access to use the proper value for block formats
- PATCH 9/17: Update pitch access to use the proper value for block formats
- Link to v7: https://lore.kernel.org/r/[email protected]
Changes in v7:
- Some typos and indent fixes
- Add Review-By, Acked-By
- PATCH 3/17: Clarify src/dst unit
- PATCH 9/17: Clarify documentation
- PATCH 9/17: Restrict conditions for direction
- PATCH 9/17: Rename get_block_step_byte to get_block_step_bytes
- PATCH 10/17: Clarify kernel doc for clamp_line_coordinates, blend_line, pixel_read_line_t
- PATCH 10/17: Fix the case when src_*_start >= fb->width/height
- PATCH 10/17: Change y in blend to be an int
- PATCH 10/17: Clarify documentation for read functions
- PATCH 12/17: Fix the type of rgb variables in argb_u16_from_yuv888
- PATCH 12/17: Move comments at the right place, remove useless ones
- PATCH 12/17: Add missing const
- PATCH 17/17: Use drm_format_info_bpp and computation to avoid hard-coded values
- Link to v6: https://lore.kernel.org/r/[email protected]
Changes in v6:
- Add Randy
- Add Review-By and Acked-By
- PATCH 2/17: Remove useless newline
- PATCH 3/17: Fix kernel doc
- PATCH 4/17: Fix typo in git commit
- PATCH 4/17: Fix kernel doc and simplify brief description of typedef
- PATCH 5/17: Change black default color to Magenta
- PATCH 5/17: Fix wording in comment
- PATCH 7/17: Fix typo in packed_pixel_offset
- PATCH 7/17: Add WARN_ON for currently not supported formats
- PATCH 8/17: Rename x_limit to pixel_count
- PATCH 8/17: Clarify kernel doc for pre_mul_alpha_blend
- PATCH 9/17: Rename get_step_next_block to get_block_step_bytes
- PATCH 9/17: Change kernel doc order
- PATCH 9/17: Rework the direction_for_rotation function to use drm helpers
- PATCH 9/17: Add a warn in direction_for_rotation if the result is not expected
- PATCH 10/17: Reword the comment of pixel color conversion functions
- PATCH 10/17: Refactor the blending function to extract functions
- PATCH 11/17: Remove useless drm_rotation_simplify
- PATCH 12/17: Fix typo in comments
- PATCH 12/17: Remove useless define
- PATCH 12/17: Fix some comments typo and kernel doc
- PATCH 12/17: Add a comma at the end of the vkms_formats list
- PATCH 12/17: Use copy of matrix instead of pointers
- PATCH 12/17: Use 16 bit range for yuv conversion
- PATCH 17/17: Add a comma at the end of the vkms_formats list
- PATCH 17/17: Add assertions
- PATCH 17/17: Fix color conversion... Next time I will read the doc twice...
- Link to v5: https://lore.kernel.org/r/[email protected]
Changes in v5:
- All patches: fix some formatting issues
- PATCH 4/16: Use the correct formatter for 4cc code
- PATCH 7/16: Update the pixel accessors to also return the pixel position inside a block.
- PATCH 8/16: Fix a temporary bug
- PATCH 9/16: Update the get_step_1x1 to get_step_next_block and update the documentation
- PATCH 10/16: Update to uses the new pixel accessors
- PATCH 10/16: Reword some comments
- PATCH 11/16: Update to use the new pixel accessors
- PATCH 11/16: Fix a bug in the subsampling offset for inverted reading (right to left/bottom to top). Found by [8].
- PATCH 11/16: Apply Arthur's modifications (comments, algorithm clarification)
- PATCH 11/16: Use the correct formatter for 4cc code
- PATCH 11/16: Update to use the new get_step_next_block
- PATCH 14/16: Apply Arthur's modification (comments, compilation issue)
- PATCH 15/16: Add Arthur's patch to explain the kunit tests
- PATCH 16/16: Introduce DRM_FORMAT_R* support.
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
- PATCH 3/14: Update comments for get_pixel_* functions
- PATCH 4/14: Add WARN when trying to get unsupported pixel_* functions
- PATCH 5/14: Create dummy pixel reader/writer to avoid NULL
function pointers and kernel OOPS
- PATCH 6/14: Added the usage of const pointers when needed
- PATCH 7/14: Extraction of pixel accessors modification
- PATCH 8/14: Extraction of the blending function modification
- PATCH 9/14: Extraction of the pixel_read_direction enum
- PATCH 10/14: Update direction_for_rotation documentation
- PATCH 10/14: Rename conversion functions to be explicit
- PATCH 10/14: Replace while(count) by while(out_pixel<end) in read_line callbacks. It avoid a new variable+addition in the composition hot path.
- PATCH 11/14: Rename conversion functions to be explicit
- PATCH 11/14: Update the documentation for get_subsampling_offset
- PATCH 11/14: Add the matrix_conversion structure to remove a test from the hot path.
- PATCH 11/14: Upadate matrix values to use 32.32 fixed floats for conversion
- PATCH 12/14: Update commit message
- PATCH 14/14: Change kunit expected value
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Correction of remaining git-rebase artefacts
- Added Pekka in copy of this patch
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Rebased the series on top of drm-misc/drm-misc-net
- Extract the typedef for pixel_read/pixel_write
- Introduce the line-by-line algorithm per pixel format
- Add some documentation for existing and new code
- Port the series [1] to use line-by-line algorithm
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Arthur Grillo (6):
drm/vkms: Use drm_frame directly
drm/vkms: Add YUV support
drm/vkms: Add range and encoding properties to the plane drm/vkms: Drop YUV formats TODO
drm/vkms: Create KUnit tests for YUV conversions drm/vkms: Add how to run the Kunit tests
Louis Chauvet (10):
drm/vkms: Code formatting
drm/vkms: write/update the documentation for pixel conversion and pixel write functions drm/vkms: Add typedef and documentation for pixel_read and pixel_write functions drm/vkms: Use const for input pointers in pixel_read an pixel_write functions drm/vkms: Update pixels accessor to support packed and multi-plane formats. drm/vkms: Avoid computing blending limits inside pre_mul_alpha_blend drm/vkms: Introduce pixel_read_direction enum
drm/vkms: Re-introduce line-per-line composition algorithm
drm/vkms: Remove useless drm_rotation_simplify
drm/vkms: Add support for DRM_FORMAT_R*
Documentation/gpu/vkms.rst | 14 +- drivers/gpu/drm/vkms/Kconfig | 15 + drivers/gpu/drm/vkms/Makefile | 1 + drivers/gpu/drm/vkms/tests/.kunitconfig | 4 + drivers/gpu/drm/vkms/tests/Makefile | 3 + drivers/gpu/drm/vkms/tests/vkms_format_test.c | 232 +++++++ drivers/gpu/drm/vkms/vkms_composer.c | 315 +++++++-- drivers/gpu/drm/vkms/vkms_crtc.c | 6 +- drivers/gpu/drm/vkms/vkms_drv.c | 3 +- drivers/gpu/drm/vkms/vkms_drv.h | 84 ++- drivers/gpu/drm/vkms/vkms_formats.c | 909 ++++++++++++++++++++++---- drivers/gpu/drm/vkms/vkms_formats.h | 13 +- drivers/gpu/drm/vkms/vkms_plane.c | 46 +- drivers/gpu/drm/vkms/vkms_writeback.c | 5 - 14 files changed, 1430 insertions(+), 220 deletions(-)
---
base-commit: 219b45d023ed0902b05c5902a4f31c2c38bcf68c
change-id: 20240201-yuv-1337d90d9576
Best regards,
Signature · 1 line
Louis Chauvet <[email protected]>
Louis Chauvet
maintainerPATCH v10 1/16 drm/vkms: Code formatting
Few no-op changes to remove double spaces and fix wrong alignments.
--- drivers/gpu/drm/vkms/vkms_composer.c | 10 +++++----- drivers/gpu/drm/vkms/vkms_crtc.c | 6 ++---- drivers/gpu/drm/vkms/vkms_drv.c | 3 +-- drivers/gpu/drm/vkms/vkms_plane.c | 8 ++++---- 4 files changed, 12 insertions(+), 15 deletions(-)
drivers/gpu/drm/vkms/vkms_composer.c +5 -5
@@ -96,7 +96,7 @@ static u16 lerp_u16(u16 a, u16 b, s64 t)s64 a_fp =drm_int2fixp (a);s64 b_fp =drm_int2fixp (b); -s64 delta =drm_fixp_mul (b_fp - a_fp, t); +s64 delta =drm_fixp_mul (b_fp - a_fp, t);return drm_fixp2int (a_fp + delta); }
@@ -302,8 +302,8 @@ static int compose_active_planes(struct vkms_writeback_job *active_wb,void vkms_composer_worker (struct work_struct *work) {struct vkms_crtc_state *crtc_state =container_of (work, - struct vkms_crtc_state, - composer_work); + struct vkms_crtc_state, + composer_work);struct drm_crtc *crtc = crtc_state->base.crtc;struct vkms_writeback_job *active_wb = crtc_state->active_writeback;struct vkms_output *out =drm_crtc_to_vkms_output (crtc);
@@ -328,7 +328,7 @@ void vkms_composer_worker(struct work_struct *work) crtc_state->gamma_lut.base = (struct drm_color_lut *)crtc->state->gamma_lut->data; crtc_state->gamma_lut.lut_length = crtc->state->gamma_lut->length /sizeof (struct drm_color_lut ); - max_lut_index_fp =drm_int2fixp (crtc_state->gamma_lut.lut_length -1 ); + max_lut_index_fp =drm_int2fixp (crtc_state->gamma_lut.lut_length -1 ); crtc_state->gamma_lut.channel_value2index_ratio =drm_fixp_div (max_lut_index_fp, u16_max_fp);
@@ -367,7 +367,7 @@ void vkms_composer_worker(struct work_struct *work)drm_crtc_add_crc_entry (crtc, true, frame_start++, &crc32); } -static const char *const pipe_crc_sources[] = {"auto" }; +static const char *const pipe_crc_sources[] = {"auto" };const char *const *vkms_get_crc_sources (struct drm_crtc *crtc,size_t *count)
drivers/gpu/drm/vkms/vkms_crtc.c +2 -4
@@ -188,8 +188,7 @@ static int vkms_crtc_atomic_check(struct drm_crtc *crtc,return ret;drm_for_each_plane_mask (plane, crtc->dev, crtc_state->plane_mask) { - plane_state =drm_atomic_get_existing_plane_state (crtc_state->state, - plane); + plane_state =drm_atomic_get_existing_plane_state (crtc_state->state, plane);WARN_ON (!plane_state);if (!plane_state->visible)
@@ -205,8 +204,7 @@ static int vkms_crtc_atomic_check(struct drm_crtc *crtc, i =0 ;drm_for_each_plane_mask (plane, crtc->dev, crtc_state->plane_mask) { - plane_state =drm_atomic_get_existing_plane_state (crtc_state->state, - plane); + plane_state =drm_atomic_get_existing_plane_state (crtc_state->state, plane);if (!plane_state->visible)continue ;
drivers/gpu/drm/vkms/vkms_drv.c +1 -2
@@ -81,8 +81,7 @@ static void vkms_atomic_commit_tail(struct drm_atomic_state *old_state)drm_atomic_helper_wait_for_flip_done (dev, old_state);for_each_old_crtc_in_state (old_state, crtc, old_crtc_state, i) { -struct vkms_crtc_state *vkms_state = -to_vkms_crtc_state (old_crtc_state); +struct vkms_crtc_state *vkms_state =to_vkms_crtc_state (old_crtc_state);flush_work (&vkms_state->composer_work); }
drivers/gpu/drm/vkms/vkms_plane.c +4 -4
@@ -117,10 +117,10 @@ static void vkms_plane_atomic_update(struct drm_plane *plane,memcpy (&frame_info->map, &shadow_plane_state->data,sizeof (frame_info->map));drm_framebuffer_get (frame_info->fb); frame_info->rotation =drm_rotation_simplify (new_state->rotation,DRM_MODE_ROTATE_0 | -DRM_MODE_ROTATE_90 | -DRM_MODE_ROTATE_270 | -DRM_MODE_REFLECT_X | -DRM_MODE_REFLECT_Y ); +DRM_MODE_ROTATE_90 | +DRM_MODE_ROTATE_270 | +DRM_MODE_REFLECT_X | +DRM_MODE_REFLECT_Y );drm_rect_rotate (&frame_info->rotated,drm_rect_width (&frame_info->rotated),drm_rect_height (&frame_info->rotated), frame_info->rotation);
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 2/16 drm/vkms: Use drm_frame directly
In reply to Louis ChauvetFrom: Arthur Grillo <[email protected]>
Remove intermidiary variables and access the variables directly from drm_frame. These changes should be noop.
--- drivers/gpu/drm/vkms/vkms_drv.h | 3 --- drivers/gpu/drm/vkms/vkms_formats.c | 11 ++++++----- drivers/gpu/drm/vkms/vkms_plane.c | 3 --- drivers/gpu/drm/vkms/vkms_writeback.c | 5 ----- 4 files changed, 6 insertions(+), 16 deletions(-)
drivers/gpu/drm/vkms/vkms_drv.h +0 -3
@@ -31,9 +31,6 @@ struct vkms_frame_info {struct drm_rect rotated;struct iosys_map map[DRM_FORMAT_MAX_PLANES ];unsigned int rotation; -unsigned int offset; -unsigned int pitch; -unsigned int cpp; };struct pixel_argb_u16 {
drivers/gpu/drm/vkms/vkms_formats.c +6 -5
@@ -11,8 +11,9 @@static size_t pixel_offset (const struct vkms_frame_info *frame_info,int x,int y) { -return frame_info->offset + (y * frame_info->pitch) - + (x * frame_info->cpp); +struct drm_framebuffer *fb = frame_info->fb; + +return fb->offsets[0 ] + (y * fb->pitches[0 ]) + (x * fb->format->cpp[0 ]); }/*
@@ -131,12 +132,12 @@ void vkms_compose_row(struct line_buffer *stage_buffer, struct vkms_plane_stateu8 *src_pixels =get_packed_src_addr (frame_info, y);int limit =min_t (size_t,drm_rect_width (&frame_info->dst), stage_buffer->n_pixels); -for (size_t x =0 ; x < limit; x++, src_pixels += frame_info->cpp) { +for (size_t x =0 ; x < limit; x++, src_pixels += frame_info->fb->format->cpp[0 ]) {int x_pos =get_x_position (frame_info, limit, x);if (drm_rotation_90_or_270 (frame_info->rotation)) src_pixels =get_packed_src_addr (frame_info, x + frame_info->rotated.y1) - + frame_info->cpp * y; + + frame_info->fb->format->cpp[0 ] * y; plane->pixel_read (src_pixels, &out_pixels[x_pos]); }
@@ -223,7 +224,7 @@ void vkms_writeback_row(struct vkms_writeback_job *wb,struct pixel_argb_u16 *in_pixels = src_buffer->pixels;int x_limit =min_t (size_t,drm_rect_width (&frame_info->dst), src_buffer->n_pixels); -for (size_t x =0 ; x < x_limit; x++, dst_pixels += frame_info->cpp) +for (size_t x =0 ; x < x_limit; x++, dst_pixels += frame_info->fb->format->cpp[0 ]) wb->pixel_write (dst_pixels, &in_pixels[x]); }
drivers/gpu/drm/vkms/vkms_plane.c +0 -3
@@ -125,9 +125,6 @@ static void vkms_plane_atomic_update(struct drm_plane *plane,drm_rect_rotate (&frame_info->rotated,drm_rect_width (&frame_info->rotated),drm_rect_height (&frame_info->rotated), frame_info->rotation); - frame_info->offset = fb->offsets[0 ]; - frame_info->pitch = fb->pitches[0 ]; - frame_info->cpp = fb->format->cpp[0 ]; vkms_plane_state->pixel_read =get_pixel_conversion_function (fmt); }
drivers/gpu/drm/vkms/vkms_writeback.c +0 -5
@@ -149,11 +149,6 @@ static void vkms_wb_atomic_commit(struct drm_connector *conn, crtc_state->active_writeback = active_wb; crtc_state->wb_pending = true;spin_unlock_irq (&output->composer_lock); - - wb_frame_info->offset = fb->offsets[0 ]; - wb_frame_info->pitch = fb->pitches[0 ]; - wb_frame_info->cpp = fb->format->cpp[0 ]; -drm_writeback_queue_job (wb_conn, connector_state); active_wb->pixel_write =get_pixel_write_function (wb_format);drm_rect_init (&wb_frame_info->src,0 ,0 , crtc_width, crtc_height);
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 3/16 drm/vkms: write/update the documentation for pixel conversion and pixel write functions
In reply to Louis ChauvetAdd some documentation on pixel conversion functions. Update of outdated comments for pixel_write functions.
--- drivers/gpu/drm/vkms/vkms_composer.c | 7 ++++ drivers/gpu/drm/vkms/vkms_drv.h | 15 ++++++++- drivers/gpu/drm/vkms/vkms_formats.c | 62 ++++++++++++++++++++++++++++++------ 3 files changed, 74 insertions(+), 10 deletions(-)
drivers/gpu/drm/vkms/vkms_composer.c +7 -0
@@ -189,6 +189,13 @@ static void blend(struct vkms_writeback_job *wb,size_t crtc_y_limit = crtc_state->base.crtc->mode.vdisplay; +/* +* The planes are composed line-by-line to avoid heavy memory usage. It is a necessary +* complexity to avoid poor blending performance. +* +* The function vkms_compose_row() is used to read a line, pixel-by-pixel, into the staging +* buffer. +*/ for (size_t y =0 ; y < crtc_y_limit; y++) {fill_background (&background_color, output_buffer);
drivers/gpu/drm/vkms/vkms_drv.h +14 -1
@@ -25,6 +25,17 @@#define VKMS_LUT_SIZE 256 +/** +* struct vkms_frame_info - Structure to store the state of a frame +* +* @fb: backing drm framebuffer +* @src: source rectangle of this frame in the source framebuffer, stored in 16.16 fixed-point form +* @dst: destination rectangle in the crtc buffer, stored in whole pixel units +* @map: see drm_shadow_plane_state@data +* @rotation: rotation applied to the source. +* +* @src and @dst should have the same size modulo the rotation. +*/ struct vkms_frame_info {struct drm_framebuffer *fb;struct drm_rect src, dst;
@@ -49,9 +60,11 @@ struct vkms_writeback_job { };/** -* vkms_plane_state - Driver specific plane state +* struct vkms_plane_state - Driver specific plane state * @base: base plane state * @frame_info: data required for composing computation +* @pixel_read: function to read a pixel in this plane. The creator of a struct vkms_plane_state +* must ensure that this pointer is valid */ struct vkms_plane_state {struct drm_shadow_plane_state base;
drivers/gpu/drm/vkms/vkms_formats.c +53 -9
113 lines not on this page · raw message
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 4/16 drm/vkms: Add typedef and documentation for pixel_read and pixel_write functions
In reply to Louis ChauvetIntroduce two typedefs: pixel_read_t and pixel_write_t. It allows the compiler to check if the passed functions take the correct arguments. Such typedefs will help ensuring consistency across the code base in case of update of these prototypes.
Rename input/output variable in a consistent way between read_line and write_line.
A warn has been added in get_pixel_*_function to alert when an unsupported pixel format is requested. As those formats are checked before atomic_update callbacks, it should never happen.
Document for those typedefs.
--- drivers/gpu/drm/vkms/vkms_drv.h | 23 ++++++- drivers/gpu/drm/vkms/vkms_formats.c | 122 ++++++++++++++++++++---------------- drivers/gpu/drm/vkms/vkms_formats.h | 4 +- drivers/gpu/drm/vkms/vkms_plane.c | 2 +- 4 files changed, 93 insertions(+), 58 deletions(-)
drivers/gpu/drm/vkms/vkms_drv.h +21 -2
@@ -53,12 +53,31 @@ struct line_buffer {struct pixel_argb_u16 *pixels; }; +/** +* typedef pixel_write_t - These functions are used to read a pixel from a +* &struct pixel_argb_u16, convert it in a specific format and write it in the @dst_pixels +* buffer. +* +* @out_pixel: destination address to write the pixel +* @in_pixel: pixel to write +*/ +typedef void (*pixel_write_t )(u8 *out_pixel,struct pixel_argb_u16 *in_pixel); +struct vkms_writeback_job {struct iosys_map data[DRM_FORMAT_MAX_PLANES ];struct vkms_frame_info wb_frame_info; -void (*pixel_write)(u8 *dst_pixels,struct pixel_argb_u16 *in_pixel); +pixel_write_t pixel_write; }; +/** +* typedef pixel_read_t - These functions are used to read a pixel in the source frame, +* convert it to `struct pixel_argb_u16` and write it to @out_pixel. +* +* @in_pixel: pointer to the pixel to read +* @out_pixel: pointer to write the converted pixel +*/ +typedef void (*pixel_read_t )(u8 *in_pixel,struct pixel_argb_u16 *out_pixel); +/** * struct vkms_plane_state - Driver specific plane state * @base: base plane state
@@ -69,7 +88,7 @@ struct vkms_writeback_job {struct vkms_plane_state {struct drm_shadow_plane_state base;struct vkms_frame_info *frame_info; -void (*pixel_read)(u8 *src_buffer,struct pixel_argb_u16 *out_pixel); +pixel_read_t pixel_read; };struct vkms_plane {
drivers/gpu/drm/vkms/vkms_formats.c +69 -53
213 lines not on this page · raw message
drivers/gpu/drm/vkms/vkms_formats.h +2 -2
@@ -5,8 +5,8 @@#include "vkms_drv.h" -void *get_pixel_conversion_function (u32 format); +pixel_read_t get_pixel_read_function (u32 format); -void *get_pixel_write_function (u32 format); +pixel_write_t get_pixel_write_function (u32 format);#endif /* _VKMS_FORMATS_H_ */
drivers/gpu/drm/vkms/vkms_plane.c +1 -1
@@ -125,7 +125,7 @@ static void vkms_plane_atomic_update(struct drm_plane *plane,drm_rect_rotate (&frame_info->rotated,drm_rect_width (&frame_info->rotated),drm_rect_height (&frame_info->rotated), frame_info->rotation); - vkms_plane_state->pixel_read =get_pixel_conversion_function (fmt); + vkms_plane_state->pixel_read =get_pixel_read_function (fmt); } static int vkms_plane_atomic_check(struct drm_plane *plane,
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 5/16 drm/vkms: Use const for input pointers in pixel_read an pixel_write functions
In reply to Louis ChauvetAs the pixel_read and pixel_write function should never modify the input buffer, mark those pointers const.
--- drivers/gpu/drm/vkms/vkms_drv.h | 4 ++-- drivers/gpu/drm/vkms/vkms_formats.c | 20 ++++++++++---------- 2 files changed, 12 insertions(+), 12 deletions(-)
drivers/gpu/drm/vkms/vkms_drv.h +2 -2
@@ -61,7 +61,7 @@ struct line_buffer {* @out_pixel: destination address to write the pixel * @in_pixel: pixel to write */ -typedef void (*pixel_write_t )(u8 *out_pixel,struct pixel_argb_u16 *in_pixel); +typedef void (*pixel_write_t )(u8 *out_pixel,const struct pixel_argb_u16 *in_pixel);struct vkms_writeback_job {struct iosys_map data[DRM_FORMAT_MAX_PLANES ];
@@ -76,7 +76,7 @@ struct vkms_writeback_job {* @in_pixel: pointer to the pixel to read * @out_pixel: pointer to write the converted pixel */ -typedef void (*pixel_read_t )(u8 *in_pixel,struct pixel_argb_u16 *out_pixel); +typedef void (*pixel_read_t )(const u8 *in_pixel,struct pixel_argb_u16 *out_pixel);/** * struct vkms_plane_state - Driver specific plane state
drivers/gpu/drm/vkms/vkms_formats.c +10 -10
@@ -75,7 +75,7 @@ static int get_x_position(const struct vkms_frame_info *frame_info, int limit, i* They are used in the vkms_compose_row() function to handle multiple formats. */ -static void ARGB8888_to_argb_u16 (u8 *in_pixel,struct pixel_argb_u16 *out_pixel) +static void ARGB8888_to_argb_u16 (const u8 *in_pixel,struct pixel_argb_u16 *out_pixel) {/* * The 257 is the "conversion ratio". This number is obtained by the
@@ -89,7 +89,7 @@ static void ARGB8888_to_argb_u16(u8 *in_pixel, struct pixel_argb_u16 *out_pixel) out_pixel->b = (u16 )in_pixel[0 ] *257 ; } -static void XRGB8888_to_argb_u16 (u8 *in_pixel,struct pixel_argb_u16 *out_pixel) +static void XRGB8888_to_argb_u16 (const u8 *in_pixel,struct pixel_argb_u16 *out_pixel) { out_pixel->a = (u16 )0xffff ; out_pixel->r = (u16 )in_pixel[2 ] *257 ;
@@ -97,7 +97,7 @@ static void XRGB8888_to_argb_u16(u8 *in_pixel, struct pixel_argb_u16 *out_pixel) out_pixel->b = (u16 )in_pixel[0 ] *257 ; } -static void ARGB16161616_to_argb_u16 (u8 *in_pixel,struct pixel_argb_u16 *out_pixel) +static void ARGB16161616_to_argb_u16 (const u8 *in_pixel,struct pixel_argb_u16 *out_pixel) {__le16 *pixel = (__le16 *)in_pixel;
@@ -107,7 +107,7 @@ static void ARGB16161616_to_argb_u16(u8 *in_pixel, struct pixel_argb_u16 *out_pi out_pixel->b =le16_to_cpu (pixel[0 ]); } -static void XRGB16161616_to_argb_u16 (u8 *in_pixel,struct pixel_argb_u16 *out_pixel) +static void XRGB16161616_to_argb_u16 (const u8 *in_pixel,struct pixel_argb_u16 *out_pixel) {__le16 *pixel = (__le16 *)in_pixel;
@@ -117,7 +117,7 @@ static void XRGB16161616_to_argb_u16(u8 *in_pixel, struct pixel_argb_u16 *out_pi out_pixel->b =le16_to_cpu (pixel[0 ]); } -static void RGB565_to_argb_u16 (u8 *in_pixel,struct pixel_argb_u16 *out_pixel) +static void RGB565_to_argb_u16 (const u8 *in_pixel,struct pixel_argb_u16 *out_pixel) {__le16 *pixel = (__le16 *)in_pixel;
@@ -173,7 +173,7 @@ void vkms_compose_row(struct line_buffer *stage_buffer, struct vkms_plane_state* They are used in vkms_writeback_row() to convert and store a pixel from the src_buffer to * the writeback buffer. */ -static void argb_u16_to_ARGB8888 (u8 *out_pixel,struct pixel_argb_u16 *in_pixel) +static void argb_u16_to_ARGB8888 (u8 *out_pixel,const struct pixel_argb_u16 *in_pixel) {/* * This sequence below is important because the format's byte order is
@@ -191,7 +191,7 @@ static void argb_u16_to_ARGB8888(u8 *out_pixel, struct pixel_argb_u16 *in_pixel) out_pixel[0 ] =DIV_ROUND_CLOSEST (in_pixel->b,257 ); } -static void argb_u16_to_XRGB8888 (u8 *out_pixel,struct pixel_argb_u16 *in_pixel) +static void argb_u16_to_XRGB8888 (u8 *out_pixel,const struct pixel_argb_u16 *in_pixel) { out_pixel[3 ] =0xff ; out_pixel[2 ] =DIV_ROUND_CLOSEST (in_pixel->r,257 );
@@ -199,7 +199,7 @@ static void argb_u16_to_XRGB8888(u8 *out_pixel, struct pixel_argb_u16 *in_pixel) out_pixel[0 ] =DIV_ROUND_CLOSEST (in_pixel->b,257 ); } -static void argb_u16_to_ARGB16161616 (u8 *out_pixel,struct pixel_argb_u16 *in_pixel) +static void argb_u16_to_ARGB16161616 (u8 *out_pixel,const struct pixel_argb_u16 *in_pixel) {__le16 *pixel = (__le16 *)out_pixel;
@@ -209,7 +209,7 @@ static void argb_u16_to_ARGB16161616(u8 *out_pixel, struct pixel_argb_u16 *in_pi pixel[0 ] =cpu_to_le16 (in_pixel->b); } -static void argb_u16_to_XRGB16161616 (u8 *out_pixel,struct pixel_argb_u16 *in_pixel) +static void argb_u16_to_XRGB16161616 (u8 *out_pixel,const struct pixel_argb_u16 *in_pixel) {__le16 *pixel = (__le16 *)out_pixel;
@@ -219,7 +219,7 @@ static void argb_u16_to_XRGB16161616(u8 *out_pixel, struct pixel_argb_u16 *in_pi pixel[0 ] =cpu_to_le16 (in_pixel->b); } -static void argb_u16_to_RGB565 (u8 *out_pixel,struct pixel_argb_u16 *in_pixel) +static void argb_u16_to_RGB565 (u8 *out_pixel,const struct pixel_argb_u16 *in_pixel) {__le16 *pixel = (__le16 *)out_pixel;
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 6/16 drm/vkms: Update pixels accessor to support packed and multi-plane formats.
In reply to Louis ChauvetIntroduce the usage of block_h/block_w to compute the offset and the pointer of a pixel. The previous implementation was specialized for planes with block_h == block_w == 1. To avoid confusion and allow easier implementation of tiled formats. It also remove the usage of the deprecated format field cpp.
Introduce the plane_index parameter to get an offset/pointer on a different plane.
--- drivers/gpu/drm/vkms/vkms_formats.c | 112 ++++++++++++++++++++++++++++-------- 1 file changed, 89 insertions(+), 23 deletions(-)
drivers/gpu/drm/vkms/vkms_formats.c +89 -23
@@ -10,22 +10,45 @@#include "vkms_formats.h" /** -* pixel_offset() - Get the offset of the pixel at coordinates x/y in the first plane +* packed_pixels_offset() - Get the offset of the block containing the pixel at coordinates x/y * * @frame_info: Buffer metadata * @x: The x coordinate of the wanted pixel in the buffer * @y: The y coordinate of the wanted pixel in the buffer +* @plane_index: The index of the plane to use +* @offset: The returned offset inside the buffer of the block +* @rem_x,@rem_y: The returned coordinate of the requested pixel in the block * -* The caller must ensure that the framebuffer associated with this request uses a pixel format -* where block_h == block_w == 1. -* If this requirement is not fulfilled, the resulting offset can point to an other pixel or -* outside of the buffer. +* As some pixel formats store multiple pixels in a block (DRM_FORMAT_R* for example), some +* pixels are not individually addressable. This function return 3 values: the offset of the +* whole block, and the coordinate of the requested pixel inside this block. +* For example, if the format is DRM_FORMAT_R1 and the requested coordinate is 13,5, the offset +* will point to the byte 5*pitches + 13/8 (second byte of the 5th line), and the rem_x/rem_y +* coordinates will be (13 % 8, 5 % 1) = (5, 0) +* +* With this function, the caller just have to extract the correct pixel from the block. */ -static size_t pixel_offset (const struct vkms_frame_info *frame_info,int x,int y) +static void packed_pixels_offset (const struct vkms_frame_info *frame_info,int x,int y, +int plane_index,int *offset,int *rem_x,int *rem_y) {struct drm_framebuffer *fb = frame_info->fb; +const struct drm_format_info *format = frame_info->fb->format; +/* Directly using x and y to multiply pitches and format->ccp is not sufficient because +* in some formats a block can represent multiple pixels. +* +* Dividing x and y by the block size allows to extract the correct offset of the block +* containing the pixel. +*/ -return fb->offsets[0 ] + (y * fb->pitches[0 ]) + (x * fb->format->cpp[0 ]); +int block_x = x /drm_format_info_block_width (format, plane_index); +int block_y = y /drm_format_info_block_height (format, plane_index); +int block_pitch = fb->pitches[plane_index] *drm_format_info_block_height (format, + plane_index); + *rem_x = x %drm_format_info_block_width (format, plane_index); + *rem_y = y %drm_format_info_block_height (format, plane_index); + *offset = fb->offsets[plane_index] + + block_y * block_pitch + + block_x * format->char_per_block[plane_index]; }/**
@@ -35,30 +58,70 @@ static size_t pixel_offset(const struct vkms_frame_info *frame_info, int x, int* @frame_info: Buffer metadata * @x: The x (width) coordinate inside the plane * @y: The y (height) coordinate inside the plane +* @plane_index: The index of the plane +* @addr: The returned pointer +* @rem_x,@rem_y: The returned coordinate of the requested pixel in the block * -* Takes the information stored in the frame_info, a pair of coordinates, and -* returns the address of the first color channel. -* This function assumes the channels are packed together, i.e. a color channel -* comes immediately after another in the memory. And therefore, this function -* doesn't work for YUV with chroma subsampling (e.g. YUV420 and NV21). +* Takes the information stored in the frame_info, a pair of coordinates, and returns the address +* of the block containing this pixel and the pixel position inside this block. * -* The caller must ensure that the framebuffer associated with this request uses a pixel format -* where block_h == block_w == 1, otherwise the returned pointer can be outside the buffer. +* See @packed_pixel_offset for details about rem_x/rem_y behavior. */ -static void *packed_pixels_addr (const struct vkms_frame_info *frame_info, -int x,int y) +static void packed_pixels_addr (const struct vkms_frame_info *frame_info, +int x,int y,int plane_index,u8 **addr,int *rem_x, +int *rem_y) { -size_t offset =pixel_offset (frame_info, x, y); +int offset; -return (u8 *)frame_info->map[0 ].vaddr + offset; +packed_pixels_offset (frame_info, x, y, plane_index, &offset, rem_x, rem_y); + *addr = (u8 *)frame_info->map[0 ].vaddr + offset; } -static void *get_packed_src_addr (const struct vkms_frame_info *frame_info,int y) +/** +* packed_pixels_addr_1x1() - Get the pointer to the block containing the pixel at the given +* coordinates +* +* @frame_info: Buffer metadata +* @x: The x (width) coordinate inside the plane +* @y: The y (height) coordinate inside the plane +* @plane_index: The index of the plane +* @addr: The returned pointer +* +* This function can only be used with format where block_h == block_w == 1. +*/ +static void packed_pixels_addr_1x1 (const struct vkms_frame_info *frame_info, +int x,int y,int plane_index,u8 **addr) +{ +int offset, rem_x, rem_y; + +WARN_ONCE (drm_format_info_block_width (frame_info->fb->format, + plane_index) !=1 , +"%s() only support formats with block_w == 1" , __func__); +WARN_ONCE (drm_format_info_block_height (frame_info->fb->format, + plane_index) !=1 , +"%s() only support formats with block_h == 1" , __func__); + +packed_pixels_offset (frame_info, x, y, plane_index, &offset, &rem_x, + &rem_y); + *addr = (u8 *)frame_info->map[0 ].vaddr + offset; +} + +static void *get_packed_src_addr (const struct vkms_frame_info *frame_info,int y, +int plane_index) {int x_src = frame_info->src.x1 >>16 ;int y_src = y - frame_info->rotated.y1 + (frame_info->src.y1 >>16 ); +u8 *addr; +int rem_x, rem_y; + +WARN_ONCE (drm_format_info_block_width (frame_info->fb->format, plane_index) !=1 , +"%s() only support formats with block_w == 1" , __func__); +WARN_ONCE (drm_format_info_block_height (frame_info->fb->format, plane_index) !=1 , +"%s() only support formats with block_h == 1" , __func__); -return packed_pixels_addr (frame_info, x_src, y_src); +packed_pixels_addr (frame_info, x_src, y_src, plane_index, &addr, &rem_x, &rem_y); + +return addr; }static int get_x_position (const struct vkms_frame_info *frame_info,int limit,int x)
@@ -152,14 +215,14 @@ void vkms_compose_row(struct line_buffer *stage_buffer, struct vkms_plane_state {struct pixel_argb_u16 *out_pixels = stage_buffer->pixels;struct vkms_frame_info *frame_info = plane->frame_info; -u8 *src_pixels =get_packed_src_addr (frame_info, y); +u8 *src_pixels =get_packed_src_addr (frame_info, y,0 );int limit =min_t (size_t,drm_rect_width (&frame_info->dst), stage_buffer->n_pixels);for (size_t x =0 ; x < limit; x++, src_pixels += frame_info->fb->format->cpp[0 ]) {int x_pos =get_x_position (frame_info, limit, x);if (drm_rotation_90_or_270 (frame_info->rotation)) - src_pixels =get_packed_src_addr (frame_info, x + frame_info->rotated.y1) + src_pixels =get_packed_src_addr (frame_info, x + frame_info->rotated.y1,0 ) + frame_info->fb->format->cpp[0 ] * y; plane->pixel_read (src_pixels, &out_pixels[x_pos]);
@@ -250,7 +313,10 @@ void vkms_writeback_row(struct vkms_writeback_job *wb, {struct vkms_frame_info *frame_info = &wb->wb_frame_info;int x_dst = frame_info->dst.x1; -u8 *dst_pixels =packed_pixels_addr (frame_info, x_dst, y); +u8 *dst_pixels; +int rem_x, rem_y; + +packed_pixels_addr (frame_info, x_dst, y,0 , &dst_pixels, &rem_x, &rem_y);struct pixel_argb_u16 *in_pixels = src_buffer->pixels;int x_limit =min_t (size_t,drm_rect_width (&frame_info->dst), src_buffer->n_pixels);
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 7/16 drm/vkms: Avoid computing blending limits inside pre_mul_alpha_blend
In reply to Louis ChauvetThe pre_mul_alpha_blend is dedicated to blending, so to avoid mixing different concepts (coordinate calculation and color management), extract the x_limit and x_dst computation outside of this helper.
It also increases the maintainability by grouping the computation related to coordinates in the same place: the loop in blend.
--- drivers/gpu/drm/vkms/vkms_composer.c | 40 +++++++++++++++++------------------- 1 file changed, 19 insertions(+), 21 deletions(-)
drivers/gpu/drm/vkms/vkms_composer.c +19 -21
@@ -24,34 +24,30 @@ static u16 pre_mul_blend_channel(u16 src, u16 dst, u16 alpha)/** * pre_mul_alpha_blend - alpha blending equation -* @frame_info: Source framebuffer's metadata * @stage_buffer: The line with the pixels from src_plane * @output_buffer: A line buffer that receives all the blends output +* @x_start: The start offset +* @pixel_count: The number of pixels to blend * -* Using the information from the `frame_info`, this blends only the -* necessary pixels from the `stage_buffer` to the `output_buffer` -* using premultiplied blend formula. +* The pixels 0..@pixel_count in stage_buffer are blended at @x_start..@x_start+@pixel_count in +* output_buffer. * * The current DRM assumption is that pixel color values have been already * pre-multiplied with the alpha channel values. See more * drm_plane_create_blend_mode_property(). Also, this formula assumes a * completely opaque background. */ -static void pre_mul_alpha_blend (struct vkms_frame_info *frame_info, -struct line_buffer *stage_buffer, -struct line_buffer *output_buffer) +static void pre_mul_alpha_blend (const struct line_buffer *stage_buffer, +struct line_buffer *output_buffer,int x_start,int pixel_count) { -int x_dst = frame_info->dst.x1; -struct pixel_argb_u16 *out = output_buffer->pixels + x_dst; -struct pixel_argb_u16 *in = stage_buffer->pixels; -int x_limit =min_t (size_t,drm_rect_width (&frame_info->dst), - stage_buffer->n_pixels); - -for (int x =0 ; x < x_limit; x++) { - out[x].a = (u16 )0xffff ; - out[x].r =pre_mul_blend_channel (in[x].r, out[x].r, in[x].a); - out[x].g =pre_mul_blend_channel (in[x].g, out[x].g, in[x].a); - out[x].b =pre_mul_blend_channel (in[x].b, out[x].b, in[x].a); +struct pixel_argb_u16 *out = &output_buffer->pixels[x_start]; +const struct pixel_argb_u16 *in = stage_buffer->pixels; + +for (int i =0 ; i < pixel_count; i++) { + out[i].a = (u16 )0xffff ; + out[i].r =pre_mul_blend_channel (in[i].r, out[i].r, in[i].a); + out[i].g =pre_mul_blend_channel (in[i].g, out[i].g, in[i].a); + out[i].b =pre_mul_blend_channel (in[i].b, out[i].b, in[i].a); } }
@@ -183,7 +179,7 @@ static void blend(struct vkms_writeback_job *wb, {struct vkms_plane_state **plane = crtc_state->active_planes;u32 n_active_planes = crtc_state->num_active_planes; -int y_pos; +int y_pos, x_dst, pixel_count;const struct pixel_argb_u16 background_color = { .a =0xffff };
@@ -201,14 +197,16 @@ static void blend(struct vkms_writeback_job *wb,/* The active planes are composed associatively in z-order. */ for (size_t i =0 ; i < n_active_planes; i++) { + x_dst = plane[i]->frame_info->dst.x1; + pixel_count =min_t (int,drm_rect_width (&plane[i]->frame_info->dst), + (int )stage_buffer->n_pixels); y_pos =get_y_pos (plane[i]->frame_info, y);if (!check_limit (plane[i]->frame_info, y_pos))continue ;vkms_compose_row (stage_buffer, plane[i], y_pos); -pre_mul_alpha_blend (plane[i]->frame_info, stage_buffer, - output_buffer); +pre_mul_alpha_blend (stage_buffer, output_buffer, x_dst, pixel_count); }apply_lut (crtc_state, output_buffer);
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 8/16 drm/vkms: Introduce pixel_read_direction enum
In reply to Louis ChauvetThe pixel_read_direction enum is useful to describe the reading direction in a plane. It avoids using the rotation property of DRM, which not practical to know the direction of reading.
This patch also introduce two helpers, one to compute the pixel_read_direction from the DRM rotation property, and one to compute the step, in byte, between two successive pixel in a specific direction.
--- drivers/gpu/drm/vkms/vkms_composer.c | 44 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/vkms/vkms_drv.h | 11 +++++++++ drivers/gpu/drm/vkms/vkms_formats.c | 32 ++++++++++++++++++++++++++ 3 files changed, 87 insertions(+)
drivers/gpu/drm/vkms/vkms_composer.c +44 -0
@@ -159,6 +159,50 @@ static void apply_lut(const struct vkms_crtc_state *crtc_state, struct line_buff } } +/** +* direction_for_rotation() - Get the correct reading direction for a given rotation +* +* @rotation: Rotation to analyze. It correspond the field @frame_info.rotation. +* +* This function will use the @rotation setting of a source plane to compute the reading +* direction in this plane which correspond to a "left to right writing" in the CRTC. +* For example, if the buffer is reflected on X axis, the pixel must be read from right to left +* to be written from left to right on the CRTC. +*/ +static enum pixel_read_direction direction_for_rotation (unsigned int rotation) +{ +struct drm_rect tmp_a, tmp_b; +int x, y; + +/* +* Points A and B are depicted as zero-size rectangles on the CRTC. +* The CRTC writing direction is from A to B. The plane reading direction +* is discovered by inverse-transforming A and B. +* The reading direction is computed by rotating the vector AB (top-left to top-right) in a +* 1x1 square. +*/ + + tmp_a =DRM_RECT_INIT (0 ,0 ,0 ,0 ); + tmp_b =DRM_RECT_INIT (1 ,0 ,0 ,0 ); +drm_rect_rotate_inv (&tmp_a,1 ,1 , rotation); +drm_rect_rotate_inv (&tmp_b,1 ,1 , rotation); + + x = tmp_b.x1 - tmp_a.x1; + y = tmp_b.y1 - tmp_a.y1; + +if (x ==1 && y ==0 ) +return READ_LEFT_TO_RIGHT ; +else if (x ==-1 && y ==0 ) +return READ_RIGHT_TO_LEFT ; +else if (y ==1 && x ==0 ) +return READ_TOP_TO_BOTTOM ; +else if (y ==-1 && x ==0 ) +return READ_BOTTOM_TO_TOP ; + +WARN_ONCE (true,"The inverse of the rotation gives an incorrect direction." ); +return READ_LEFT_TO_RIGHT ; +} +/** * blend - blend the pixels from all planes and compute crc * @wb: The writeback frame buffer metadata
drivers/gpu/drm/vkms/vkms_drv.h +11 -0
@@ -69,6 +69,17 @@ struct vkms_writeback_job {pixel_write_t pixel_write; }; +/** +* enum pixel_read_direction - Enum used internaly by VKMS to represent a reading direction in a +* plane. +*/ +enum pixel_read_direction { +READ_BOTTOM_TO_TOP , +READ_TOP_TO_BOTTOM , +READ_RIGHT_TO_LEFT , +READ_LEFT_TO_RIGHT +}; +/** * typedef pixel_read_t - These functions are used to read a pixel in the source frame, * convert it to `struct pixel_argb_u16` and write it to @out_pixel.
drivers/gpu/drm/vkms/vkms_formats.c +32 -0
@@ -77,6 +77,38 @@ static void packed_pixels_addr(const struct vkms_frame_info *frame_info, *addr = (u8 *)frame_info->map[0 ].vaddr + offset; } +/** +* get_block_step_bytes() - Common helper to compute the correct step value between each pixel block +* to read in a certain direction. +* +* @fb: Framebuffer to iter on +* @direction: Direction of the reading +* @plane_index: Plane to get the step from +* +* As the returned count is the number of bytes between two consecutive blocks in a direction, +* the caller may have to read multiple pixels before using the next one (for example, to read from +* left to right in a DRM_FORMAT_R1 plane, each block contains 8 pixels, so the step must be used +* only every 8 pixels). +*/ +static int get_block_step_bytes (struct drm_framebuffer *fb,enum pixel_read_direction direction, +int plane_index) +{ +switch (direction) { +case READ_LEFT_TO_RIGHT : +return fb->format->char_per_block[plane_index]; +case READ_RIGHT_TO_LEFT : +return -fb->format->char_per_block[plane_index]; +case READ_TOP_TO_BOTTOM : +return (int )fb->pitches[plane_index] *drm_format_info_block_width (fb->format, + plane_index); +case READ_BOTTOM_TO_TOP : +return -(int )fb->pitches[plane_index] *drm_format_info_block_width (fb->format, + plane_index); + } + +return 0 ; +} +/** * packed_pixels_addr_1x1() - Get the pointer to the block containing the pixel at the given * coordinates
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 9/16 drm/vkms: Re-introduce line-per-line composition algorithm
In reply to Louis ChauvetRe-introduce a line-by-line composition algorithm for each pixel format. This allows more performance by not requiring an indirection per pixel read. This patch is focused on readability of the code.
Line-by-line composition was introduced by [1] but rewritten back to pixel-by-pixel algorithm in [2]. At this time, nobody noticed the impact on performance, and it was merged.
This patch is almost a revert of [2], but in addition efforts have been made to increase readability and maintainability of the rotation handling. The blend function is now divided in two parts:
- Transformation of coordinates from the output referential to the source referential
- Line conversion and blending
Most of the complexity of the rotation management is avoided by using drm_rect_* helpers. The remaining complexity is around the clipping, to avoid reading/writing outside source/destination buffers.
The pixel conversion is now done line-by-line, so the read_pixel_t was replaced with read_pixel_line_t callback. This way the indirection is only required once per line and per plane, instead of once per pixel and per plane.
The read_line_t callbacks are very similar for most pixel format, but it is required to avoid performance impact. Some helpers for color conversion were introduced to avoid code repetition:
- *_to_argb_u16: perform colors conversion. They should be inlined by the compiler, and they are used to avoid repetition between multiple variants of the same format (argb/xrgb and maybe in the future for formats like bgr formats).
This new algorithm was tested with:
- kms_plane (for color conversions)
- kms_rotation_crc (for rotations of planes)
- kms_cursor_crc (for translations of planes)
- kms_rotation (for all rotations and formats combinations) [3] The performance gain was mesured with kms_fb_stress [4] with some modification to fix the writeback format.
The performance improvement is around 5 to 10%.
[1]: commit 8ba1648567e2 ("drm: vkms: Refactor the plane composer to accept
new formats")
https://lore.kernel.org/all/[email protected]/
[2]: commit 322d716a3e8a ("drm/vkms: isolate pixel conversion
functionality")
https://lore.kernel.org/all/[email protected]/[3]: https://lore.kernel.org/igt-dev/[email protected]/
[4]: https://lore.kernel.org/all/[email protected]/
--- drivers/gpu/drm/vkms/vkms_composer.c | 234 ++++++++++++++++++++++++++++------- drivers/gpu/drm/vkms/vkms_drv.h | 28 +++-- drivers/gpu/drm/vkms/vkms_formats.c | 224 ++++++++++++++++++++------------- drivers/gpu/drm/vkms/vkms_formats.h | 2 +- drivers/gpu/drm/vkms/vkms_plane.c | 5 +- 5 files changed, 344 insertions(+), 149 deletions(-)
drivers/gpu/drm/vkms/vkms_composer.c +187 -47
@@ -29,8 +29,8 @@ static u16 pre_mul_blend_channel(u16 src, u16 dst, u16 alpha)* @x_start: The start offset * @pixel_count: The number of pixels to blend * -* The pixels 0..@pixel_count in stage_buffer are blended at @x_start..@x_start+@pixel_count in -* output_buffer. +* The pixels @x_start..@x_start+@pixel_count in stage_buffer are blended at +* @x_start..@x_start+@pixel_count in output_buffer. * * The current DRM assumption is that pixel color values have been already * pre-multiplied with the alpha channel values. See more
@@ -41,7 +41,7 @@ static void pre_mul_alpha_blend(const struct line_buffer *stage_buffer, struct line_buffer *output_buffer, int x_start, int pixel_count) { struct pixel_argb_u16 *out = &output_buffer->pixels[x_start]; -const struct pixel_argb_u16 *in = stage_buffer->pixels; +const struct pixel_argb_u16 *in = &stage_buffer->pixels[x_start];for (int i =0 ; i < pixel_count; i++) { out[i].a = (u16 )0xffff ;
@@ -51,33 +51,6 @@ static void pre_mul_alpha_blend(const struct line_buffer *stage_buffer, } } -static int get_y_pos (struct vkms_frame_info *frame_info,int y) -{ -if (frame_info->rotation &DRM_MODE_REFLECT_Y ) -return drm_rect_height (&frame_info->rotated) - y -1 ; - -switch (frame_info->rotation &DRM_MODE_ROTATE_MASK ) { -case DRM_MODE_ROTATE_90 : -return frame_info->rotated.x2 - y -1 ; -case DRM_MODE_ROTATE_270 : -return y + frame_info->rotated.x1; -default : -return y; - } -} - -static bool check_limit (struct vkms_frame_info *frame_info,int pos) -{ -if (drm_rotation_90_or_270 (frame_info->rotation)) { -if (pos >=0 && pos <drm_rect_width (&frame_info->rotated)) -return true; - }else { -if (pos >= frame_info->rotated.y1 && pos < frame_info->rotated.y2) -return true; - } - -return false; -}static void fill_background (const struct pixel_argb_u16 *background_color,struct line_buffer *output_buffer)
@@ -203,6 +176,182 @@ static enum pixel_read_direction direction_for_rotation(unsigned int rotation)return READ_LEFT_TO_RIGHT ; } +/** +* clamp_line_coordinates() - Compute and clamp the coordinate to read and write during the blend +* process. +* +* @direction: direction of the reading +* @current_plane: current plane blended +* @src_line: source line of the reading. Only the top-left coordinate is used. This rectangle +* must be rotated and have a shape of 1*pixel_count if @direction is vertical and a shape of +* pixel_count*1 if @direction is horizontal. +* @src_x_start: x start coordinate for the line reading +* @src_y_start: y start coordinate for the line reading +* @dst_x_start: x coordinate to blend the read line +* @pixel_count: number of pixels to blend +* +* This function is mainly a safety net to avoid reading outside the source buffer. As the +* userspace should never ask to read outside the source plane, all the cases covered here should +* be dead code. +*/ +static void clamp_line_coordinates (enum pixel_read_direction direction, +const struct vkms_plane_state *current_plane, +const struct drm_rect *src_line,int *src_x_start, +int *src_y_start,int *dst_x_start,int *pixel_count) +{ +/* By default the start points are correct */ + *src_x_start = src_line->x1; + *src_y_start = src_line->y1; + *dst_x_start = current_plane->frame_info->dst.x1; + +/* Get the correct number of pixel to blend, it depends of the direction */ +switch (direction) { +case READ_LEFT_TO_RIGHT : +case READ_RIGHT_TO_LEFT : + *pixel_count =drm_rect_width (src_line); +break ; +case READ_BOTTOM_TO_TOP : +case READ_TOP_TO_BOTTOM : + *pixel_count =drm_rect_height (src_line); +break ; + } + +/* +* Clamp the coordinates to avoid reading outside the buffer +* +* This is mainly a security to avoid reading outside the buffer, the userspace should +* never request to read outside the source buffer. +*/ +switch (direction) { +case READ_LEFT_TO_RIGHT : +case READ_RIGHT_TO_LEFT : +if (*src_x_start <0 ) { + *pixel_count += *src_x_start; + *dst_x_start -= *src_x_start; + *src_x_start =0 ; + } +if (*src_x_start + *pixel_count > current_plane->frame_info->fb->width) + *pixel_count =max (0 , (int )current_plane->frame_info->fb->width - + *src_x_start); +break ; +case READ_BOTTOM_TO_TOP : +case READ_TOP_TO_BOTTOM : +if (*src_y_start <0 ) { + *pixel_count += *src_y_start; + *dst_x_start -= *src_y_start; + *src_y_start =0 ; + } +if (*src_y_start + *pixel_count > current_plane->frame_info->fb->height) + *pixel_count =max (0 , (int )current_plane->frame_info->fb->height - + *src_y_start); +break ; + } +} + +/** +* blend_line() - Blend a line from a plane to the output buffer +* +* @current_plane: current plane to work on +* @y: line to write in the output buffer +* @crtc_x_limit: width of the output buffer +* @stage_buffer: temporary buffer to convert the pixel line from the source buffer +* @output_buffer: buffer to blend the read line into. +*/ +static void blend_line (struct vkms_plane_state *current_plane,int y, +int crtc_x_limit,struct line_buffer *stage_buffer, +struct line_buffer *output_buffer) +{ +int src_x_start, src_y_start, dst_x_start, pixel_count; +struct drm_rect dst_line, tmp_src, src_line; + +/* Avoid rendering useless lines */ +if (y < current_plane->frame_info->dst.y1 || + y >= current_plane->frame_info->dst.y2) +return ; + +/* +* dst_line is the line to copy. The initial coordinates are inside the +* destination framebuffer, and then drm_rect_* helpers are used to +* compute the correct position into the source framebuffer. +*/ + dst_line =DRM_RECT_INIT (current_plane->frame_info->dst.x1, y, +drm_rect_width (¤t_plane->frame_info->dst), +1 ); + +drm_rect_fp_to_int (&tmp_src, ¤t_plane->frame_info->src); + +/* +* [1]: Clamping src_line to the crtc_x_limit to avoid writing outside of +* the destination buffer +*/ + dst_line.x1 =max_t (int, dst_line.x1,0 ); + dst_line.x2 =min_t (int, dst_line.x2, crtc_x_limit); +/* The destination is completely outside of the crtc. */ +if (dst_line.x2 <= dst_line.x1) +return ; + + src_line = dst_line; + +/* +* Transform the coordinate x/y from the crtc to coordinates into +* coordinates for the src buffer. +* +* - Cancel the offset of the dst buffer. +* - Invert the rotation. This assumes that +* dst = drm_rect_rotate(src, rotation) (dst and src have the +* same size, but can be rotated). +* - Apply the offset of the source rectangle to the coordinate. +*/ +drm_rect_translate (&src_line, -current_plane->frame_info->dst.x1, + -current_plane->frame_info->dst.y1); +drm_rect_rotate_inv (&src_line,drm_rect_width (&tmp_src), +drm_rect_height (&tmp_src), + current_plane->frame_info->rotation); +drm_rect_translate (&src_line, tmp_src.x1, tmp_src.y1); + +/* Get the correct reading direction in the source buffer. */ + +enum pixel_read_direction direction = +direction_for_rotation (current_plane->frame_info->rotation); + +/* [2]: Compute and clamp the number of pixel to read */ +clamp_line_coordinates (direction, current_plane, &src_line, &src_x_start, &src_y_start, + &dst_x_start, &pixel_count); + +if (pixel_count <=0 ) { +/* Nothing to read, so avoid multiple function calls */ +return ; + } + +/* +* Modify the starting point to take in account the rotation +* +* src_line is the top-left corner, so when reading READ_RIGHT_TO_LEFT or +* READ_BOTTOM_TO_TOP, it must be changed to the top-right/bottom-left +* corner. +*/ +if (direction ==READ_RIGHT_TO_LEFT ) { +// src_x_start is now the right point + src_x_start += pixel_count -1 ; + }else if (direction ==READ_BOTTOM_TO_TOP ) { +// src_y_start is now the bottom point + src_y_start += pixel_count -1 ; + } + +/* +* Perform the conversion and the blending +* +* Here we know that the read line (x_start, y_start, pixel_count) is +* inside the source buffer [2] and we don't write outside the stage +* buffer [1]. +*/ + current_plane->pixel_read_line (current_plane, src_x_start, src_y_start, direction, + pixel_count, &stage_buffer->pixels[dst_x_start]); + +pre_mul_alpha_blend (stage_buffer, output_buffer, + dst_x_start, pixel_count); +} +/** * blend - blend the pixels from all planes and compute crc * @wb: The writeback frame buffer metadata
@@ -223,34 +372,25 @@ static void blend(struct vkms_writeback_job *wb, {struct vkms_plane_state **plane = crtc_state->active_planes;u32 n_active_planes = crtc_state->num_active_planes; -int y_pos, x_dst, pixel_count;const struct pixel_argb_u16 background_color = { .a =0xffff }; -size_t crtc_y_limit = crtc_state->base.crtc->mode.vdisplay; +int crtc_y_limit = crtc_state->base.crtc->mode.vdisplay; +int crtc_x_limit = crtc_state->base.crtc->mode.hdisplay;/* * The planes are composed line-by-line to avoid heavy memory usage. It is a necessary * complexity to avoid poor blending performance. * -* The function vkms_compose_row() is used to read a line, pixel-by-pixel, into the staging -* buffer. +* The function pixel_read_line callback is used to read a line, using an efficient +* algorithm for a specific format, into the staging buffer. */ -for (size_t y =0 ; y < crtc_y_limit; y++) { +for (int y =0 ; y < crtc_y_limit; y++) {fill_background (&background_color, output_buffer);/* The active planes are composed associatively in z-order. */ for (size_t i =0 ; i < n_active_planes; i++) { - x_dst = plane[i]->frame_info->dst.x1; - pixel_count =min_t (int,drm_rect_width (&plane[i]->frame_info->dst), - (int )stage_buffer->n_pixels); - y_pos =get_y_pos (plane[i]->frame_info, y); - -if (!check_limit (plane[i]->frame_info, y_pos)) -continue ; - -vkms_compose_row (stage_buffer, plane[i], y_pos); -pre_mul_alpha_blend (stage_buffer, output_buffer, x_dst, pixel_count); +blend_line (plane[i], y, crtc_x_limit, stage_buffer, output_buffer); }apply_lut (crtc_state, output_buffer);
@@ -258,7 +398,7 @@ static void blend(struct vkms_writeback_job *wb, *crc32 =crc32_le (*crc32, (void *)output_buffer->pixels, row_size);if (wb) -vkms_writeback_row (wb, output_buffer, y_pos); +vkms_writeback_row (wb, output_buffer, y); } }
@@ -269,7 +409,7 @@ static int check_format_funcs(struct vkms_crtc_state *crtc_state,u32 n_active_planes = crtc_state->num_active_planes;for (size_t i =0 ; i < n_active_planes; i++) -if (!planes[i]->pixel_read) +if (!planes[i]->pixel_read_line)return -1 ;if (active_wb && !active_wb->pixel_write)
drivers/gpu/drm/vkms/vkms_drv.h +19 -9
@@ -39,7 +39,6 @@struct vkms_frame_info {struct drm_framebuffer *fb;struct drm_rect src, dst; -struct drm_rect rotated;struct iosys_map map[DRM_FORMAT_MAX_PLANES ];unsigned int rotation; };
@@ -80,26 +79,38 @@ enum pixel_read_direction {READ_LEFT_TO_RIGHT }; +struct vkms_plane_state ; +/** -* typedef pixel_read_t - These functions are used to read a pixel in the source frame, +* typedef pixel_read_line_t - These functions are used to read a pixel line in the source frame, * convert it to `struct pixel_argb_u16` and write it to @out_pixel. * -* @in_pixel: pointer to the pixel to read -* @out_pixel: pointer to write the converted pixel +* @plane: plane used as source for the pixel value +* @x_start: X (width) coordinate of the first pixel to copy. The caller must ensure that x_start +* is non-negative and smaller than @plane->frame_info->fb->width. +* @y_start: Y (height) coordinate of the first pixel to copy. The caller must ensure that y_start +* is non-negative and smaller than @plane->frame_info->fb->height. +* @direction: direction to use for the copy, starting at @x_start/@y_start +* @count: number of pixels to copy +* @out_pixel: pointer where to write the pixel values. They will be written from @out_pixel[0] +* (included) to @out_pixel[@count] (excluded). The caller must ensure that out_pixel have a +* length of at least @count. */ -typedef void (*pixel_read_t )(const u8 *in_pixel,struct pixel_argb_u16 *out_pixel); +typedef void (*pixel_read_line_t )(const struct vkms_plane_state *plane,int x_start, +int y_start,enum pixel_read_direction direction,int count, +struct pixel_argb_u16 out_pixel[]);/** * struct vkms_plane_state - Driver specific plane state * @base: base plane state * @frame_info: data required for composing computation -* @pixel_read: function to read a pixel in this plane. The creator of a struct vkms_plane_state -* must ensure that this pointer is valid +* @pixel_read_line: function to read a pixel line in this plane. The creator of a +* struct vkms_plane_state must ensure that this pointer is valid */ struct vkms_plane_state {struct drm_shadow_plane_state base;struct vkms_frame_info *frame_info; -pixel_read_t pixel_read; +pixel_read_line_t pixel_read_line; };struct vkms_plane {
@@ -203,7 +214,6 @@ int vkms_verify_crc_source(struct drm_crtc *crtc, const char *source_name,/* Composer Support */ void vkms_composer_worker (struct work_struct *work);void vkms_set_composer (struct vkms_output *out,bool enabled); -void vkms_compose_row (struct line_buffer *stage_buffer,struct vkms_plane_state *plane,int y);void vkms_writeback_row (struct vkms_writeback_job *wb,const struct line_buffer *src_buffer,int y);/* Writeback */
drivers/gpu/drm/vkms/vkms_formats.c +136 -88
284 lines not on this page · raw message
drivers/gpu/drm/vkms/vkms_formats.h +1 -1
@@ -5,7 +5,7 @@#include "vkms_drv.h" -pixel_read_t get_pixel_read_function (u32 format); +pixel_read_line_t get_pixel_read_line_function (u32 format);pixel_write_t get_pixel_write_function (u32 format);
drivers/gpu/drm/vkms/vkms_plane.c +1 -4
@@ -112,7 +112,6 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, frame_info = vkms_plane_state->frame_info;memcpy (&frame_info->src, &new_state->src,sizeof (struct drm_rect ));memcpy (&frame_info->dst, &new_state->dst,sizeof (struct drm_rect )); -memcpy (&frame_info->rotated, &new_state->dst,sizeof (struct drm_rect )); frame_info->fb = fb;memcpy (&frame_info->map, &shadow_plane_state->data,sizeof (frame_info->map));drm_framebuffer_get (frame_info->fb);
@@ -122,10 +121,8 @@ static void vkms_plane_atomic_update(struct drm_plane *plane,DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y); -drm_rect_rotate (&frame_info->rotated,drm_rect_width (&frame_info->rotated), -drm_rect_height (&frame_info->rotated), frame_info->rotation); - vkms_plane_state->pixel_read =get_pixel_read_function (fmt); + vkms_plane_state->pixel_read_line =get_pixel_read_line_function (fmt); } static int vkms_plane_atomic_check(struct drm_plane *plane,
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 10/16 drm/vkms: Remove useless drm_rotation_simplify
In reply to Louis ChauvetAs all the rotation are now supported by VKMS, this simplification does not make sense anymore, so remove it.
--- drivers/gpu/drm/vkms/vkms_plane.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/gpu/drm/vkms/vkms_plane.c +1 -6
@@ -115,12 +115,7 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, frame_info->fb = fb;memcpy (&frame_info->map, &shadow_plane_state->data,sizeof (frame_info->map));drm_framebuffer_get (frame_info->fb); - frame_info->rotation =drm_rotation_simplify (new_state->rotation,DRM_MODE_ROTATE_0 | -DRM_MODE_ROTATE_90 | -DRM_MODE_ROTATE_270 | -DRM_MODE_REFLECT_X | -DRM_MODE_REFLECT_Y ); - + frame_info->rotation = new_state->rotation; vkms_plane_state->pixel_read_line =get_pixel_read_line_function (fmt); }
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 11/16 drm/vkms: Add YUV support
In reply to Louis ChauvetFrom: Arthur Grillo <[email protected]>
Add support to the YUV formats bellow:
- NV12/NV16/NV24
- NV21/NV61/NV42
- YUV420/YUV422/YUV444
- YVU420/YVU422/YVU444
The conversion from yuv to rgb is done with fixed-point arithmetic, using 32.32 fixed-point numbers and the drm_fixed helpers.
To do the conversion, a specific matrix must be used for each color range (DRM_COLOR_*_RANGE) and encoding (DRM_COLOR_*). This matrix is stored in the conversion_matrix struct, along with the specific y_offset needed. This matrix is queried only once, in vkms_plane_atomic_update and stored in a vkms_plane_state. Those conversion matrices of each encoding and range were obtained by rounding the values of the original conversion matrices multiplied by 2^32. This is done to avoid the use of floating point operations.
The same reading function is used for YUV and YVU formats. As the only difference between those two category of formats is the order of field, a simple swap in conversion matrix columns allows using the same function.
[Louis Chauvet:
- Adapted Arthur's work
- Implemented the read_line_t callbacks for yuv
- add struct conversion_matrix
- store the whole conversion_matrix in the plane state
- remove struct pixel_yuv_u8
- update the commit message
- Merge the modifications from Arthur]
--- drivers/gpu/drm/vkms/vkms_drv.h | 18 ++ drivers/gpu/drm/vkms/vkms_formats.c | 353 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/vkms/vkms_formats.h | 4 + drivers/gpu/drm/vkms/vkms_plane.c | 16 +- 4 files changed, 390 insertions(+), 1 deletion(-)
drivers/gpu/drm/vkms/vkms_drv.h +18 -0
@@ -100,17 +100,35 @@ typedef void (*pixel_read_line_t)(const struct vkms_plane_state *plane, int x_st int y_start, enum pixel_read_direction direction, int count, struct pixel_argb_u16 out_pixel[]); +/** +* struct conversion_matrix - Matrix to use for a specific encoding and range +* +* @matrix: Conversion matrix from yuv to rgb. The matrix is stored in a row-major manner and is +* used to compute rgb values from yuv values: +* [[r],[g],[b]] = @matrix * [[y],[u],[v]] +* OR for yvu formats: +* [[r],[g],[b]] = @matrix * [[y],[v],[u]] +* The values of the matrix are signed fixed-point values with 32 bits fractional part. +* @y_offset: Offset to apply on the y value. +*/ +struct conversion_matrix { +s64 matrix[3 ][3 ]; +int y_offset; +}; +/** * struct vkms_plane_state - Driver specific plane state * @base: base plane state * @frame_info: data required for composing computation * @pixel_read_line: function to read a pixel line in this plane. The creator of a * struct vkms_plane_state must ensure that this pointer is valid +* @conversion_matrix: matrix used for yuv formats to convert to rgb */ struct vkms_plane_state {struct drm_shadow_plane_state base;struct vkms_frame_info *frame_info;pixel_read_line_t pixel_read_line; +struct conversion_matrix conversion_matrix; };struct vkms_plane {
drivers/gpu/drm/vkms/vkms_formats.c +353 -0
383 lines not on this page · raw message
drivers/gpu/drm/vkms/vkms_formats.h +4 -0
@@ -9,4 +9,8 @@ pixel_read_line_t get_pixel_read_line_function(u32 format);pixel_write_t get_pixel_write_function (u32 format); +void get_conversion_matrix_to_argb_u16 (u32 format,enum drm_color_encoding encoding, +enum drm_color_range range, +struct conversion_matrix *matrix); +#endif /* _VKMS_FORMATS_H_ */
drivers/gpu/drm/vkms/vkms_plane.c +15 -1
@@ -17,7 +17,19 @@ static const u32 vkms_formats[] = {DRM_FORMAT_XRGB8888 ,DRM_FORMAT_XRGB16161616 ,DRM_FORMAT_ARGB16161616 , -DRM_FORMAT_RGB565 +DRM_FORMAT_RGB565 , +DRM_FORMAT_NV12 , +DRM_FORMAT_NV16 , +DRM_FORMAT_NV24 , +DRM_FORMAT_NV21 , +DRM_FORMAT_NV61 , +DRM_FORMAT_NV42 , +DRM_FORMAT_YUV420 , +DRM_FORMAT_YUV422 , +DRM_FORMAT_YUV444 , +DRM_FORMAT_YVU420 , +DRM_FORMAT_YVU422 , + DRM_FORMAT_YVU444, }; static struct drm_plane_state *
@@ -118,6 +130,8 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, frame_info->rotation = new_state->rotation; vkms_plane_state->pixel_read_line =get_pixel_read_line_function (fmt); +get_conversion_matrix_to_argb_u16 (fmt, new_state->color_encoding, new_state->color_range, + &vkms_plane_state->conversion_matrix); } static int vkms_plane_atomic_check(struct drm_plane *plane,
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 12/16 drm/vkms: Add range and encoding properties to the plane
In reply to Louis ChauvetFrom: Arthur Grillo <[email protected]>
Now that the driver internally handles these quantization ranges and YUV encoding matrices, expose the UAPI for setting them.
--- drivers/gpu/drm/vkms/vkms_plane.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/gpu/drm/vkms/vkms_plane.c +9 -0
@@ -218,5 +218,14 @@ struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,drm_plane_create_rotation_property (&plane->base,DRM_MODE_ROTATE_0 ,DRM_MODE_ROTATE_MASK |DRM_MODE_REFLECT_MASK ); +drm_plane_create_color_properties (&plane->base, +BIT (DRM_COLOR_YCBCR_BT601 ) | +BIT (DRM_COLOR_YCBCR_BT709 ) | +BIT (DRM_COLOR_YCBCR_BT2020 ), +BIT (DRM_COLOR_YCBCR_LIMITED_RANGE ) | +BIT (DRM_COLOR_YCBCR_FULL_RANGE ), +DRM_COLOR_YCBCR_BT601 , +DRM_COLOR_YCBCR_FULL_RANGE ); +return plane; }
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 13/16 drm/vkms: Drop YUV formats TODO
In reply to Louis ChauvetFrom: Arthur Grillo <[email protected]>
VKMS has support for YUV formats now. Remove the task from the TODO list.
--- Documentation/gpu/vkms.rst | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
Documentation/gpu/vkms.rst +1 -2
@@ -122,8 +122,7 @@ There's lots of plane features we could add support for: - Scaling. -- Additional buffer formats, especially YUV formats for video like NV12. - Low/high bpp RGB formats would also be interesting. +- Additional buffer formats. Low/high bpp RGB formats would be interesting. - Async updates (currently only possible on cursor plane using the legacy cursor api).
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 14/16 drm/vkms: Create KUnit tests for YUV conversions
In reply to Louis ChauvetFrom: Arthur Grillo <[email protected]>
Create KUnit tests to test the conversion between YUV and RGB. Test each conversion and range combination with some common colors.
The code used to compute the expected result can be found in comment.
[Louis Chauvet:
- fix minor formating issues (whitespace, double line)
- change expected alpha from 0x0000 to 0xffff
- adapt to the new get_conversion_matrix usage
- apply the changes from Arthur
- move struct pixel_yuv_u8 to the test itself]
--- drivers/gpu/drm/vkms/Kconfig | 15 ++ drivers/gpu/drm/vkms/Makefile | 1 + drivers/gpu/drm/vkms/tests/.kunitconfig | 4 + drivers/gpu/drm/vkms/tests/Makefile | 3 + drivers/gpu/drm/vkms/tests/vkms_format_test.c | 232 ++++++++++++++++++++++++++ drivers/gpu/drm/vkms/vkms_formats.c | 7 +- drivers/gpu/drm/vkms/vkms_formats.h | 5 + 7 files changed, 265 insertions(+), 2 deletions(-)
drivers/gpu/drm/vkms/Kconfig +15 -0
@@ -13,3 +13,18 @@ config DRM_VKMS a VKMS. If M is selected the module will be called vkms. + +config DRM_VKMS_KUNIT_TESTS + tristate "KUnit tests for VKMS." if !KUNIT_ALL_TESTS + depends on DRM_VKMS=y && KUNIT + default KUNIT_ALL_TESTS + help + This builds unit tests for VKMS. This option is not useful for + distributions or general kernels, but only for kernel + developers working on VKMS. + + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + + If in doubt, say "N".
drivers/gpu/drm/vkms/Makefile +1 -0
@@ -9,3 +9,4 @@ vkms-y := \ vkms_writeback.o obj-$(CONFIG_DRM_VKMS) += vkms.o +obj-$(CONFIG_DRM_VKMS_KUNIT_TESTS) += tests/
drivers/gpu/drm/vkms/tests/.kunitconfig new file +4 -0
@@ -0,0 +1,4 @@ +CONFIG_KUNIT=y +CONFIG_DRM=y +CONFIG_DRM_VKMS=y +CONFIG_DRM_VKMS_KUNIT_TESTS=y
drivers/gpu/drm/vkms/tests/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_DRM_VKMS_KUNIT_TESTS) += vkms_format_test.o
drivers/gpu/drm/vkms/tests/vkms_format_test.c new file +232 -0
232 lines not on this page · raw message
drivers/gpu/drm/vkms/vkms_formats.c +5 -2
@@ -7,6 +7,8 @@#include <drm/drm_rect.h> #include <drm/drm_fixed.h> +#include <kunit/visibility.h> +#include "vkms_formats.h" /**
@@ -245,8 +247,8 @@ static struct pixel_argb_u16 argb_u16_from_RGB565(const __le16 *pixel)return out_pixel; } -static struct pixel_argb_u16 argb_u16_from_yuv888 (u8 y,u8 channel_1,u8 channel_2, -const struct conversion_matrix *matrix) +VISIBLE_IF_KUNIT struct pixel_argb_u16 argb_u16_from_yuv888(u8 y, u8 channel_1, u8 channel_2, +const struct conversion_matrix *matrix) {u16 r, g, b;s64 fp_y, fp_channel_1, fp_channel_2;
@@ -276,6 +278,7 @@ static struct pixel_argb_u16 argb_u16_from_yuv888(u8 y, u8 channel_1, u8 channelreturn argb_u16_from_u16161616 (0xffff , r, g, b); } +EXPORT_SYMBOL_IF_KUNIT (argb_u16_from_yuv888);/* * The following functions are read_line function for each pixel format supported by VKMS.
drivers/gpu/drm/vkms/vkms_formats.h +5 -0
@@ -13,4 +13,9 @@ void get_conversion_matrix_to_argb_u16(u32 format, enum drm_color_encoding encodenum drm_color_range range, struct conversion_matrix *matrix); +#if IS_ENABLED (CONFIG_KUNIT ) +struct pixel_argb_u16 argb_u16_from_yuv888 (u8 y,u8 channel_1,u8 channel_2, +const struct conversion_matrix *matrix); +#endif +#endif /* _VKMS_FORMATS_H_ */
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 15/16 drm/vkms: Add how to run the Kunit tests
In reply to Louis ChauvetFrom: Arthur Grillo <[email protected]>
Now that we have KUnit tests, add instructions on how to run them.
--- Documentation/gpu/vkms.rst | 11 +++++++++++ 1 file changed, 11 insertions(+)
Documentation/gpu/vkms.rst +11 -0
@@ -89,6 +89,17 @@ You can also run subtests if you do not want to run the entire test:: sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms" sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip +Testing With KUnit +================== + +KUnit (Kernel unit testing framework) provides a common framework for unit tests +within the Linux kernel. +More information in ../dev-tools/kunit/index.rst . + +To run the VKMS KUnit tests:: + + tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm/vkms/tests + TODO ====
Signature · 1 line
2.44.2
Louis Chauvet
maintainerPATCH v10 16/16 drm/vkms: Add support for DRM_FORMAT_R*
In reply to Louis ChauvetThis add the support for:
- R1/R2/R4/R8
R1 format was tested with [1] and [2].
[1]: https://lore.kernel.org/r/[email protected]
[2]: https://lore.kernel.org/igt-dev/[email protected]/
--- drivers/gpu/drm/vkms/vkms_formats.c | 110 +++++++++++++++++++++++++++++++++++- drivers/gpu/drm/vkms/vkms_plane.c | 4 ++ 2 files changed, 113 insertions(+), 1 deletion(-)
drivers/gpu/drm/vkms/vkms_formats.c +109 -1
@@ -247,6 +247,16 @@ static struct pixel_argb_u16 argb_u16_from_RGB565(const __le16 *pixel)return out_pixel; } +static struct pixel_argb_u16 argb_u16_from_gray8 (u16 gray) +{ +return argb_u16_from_u8888 (255 , gray, gray, gray); +} + +static struct pixel_argb_u16 argb_u16_from_grayu16 (u16 gray) +{ +return argb_u16_from_u16161616 (0xFFFF , gray, gray, gray); +} + VISIBLE_IF_KUNIT struct pixel_argb_u16 argb_u16_from_yuv888(u8 y, u8 channel_1, u8 channel_2,const struct conversion_matrix *matrix) {
@@ -284,7 +294,7 @@ EXPORT_SYMBOL_IF_KUNIT(argb_u16_from_yuv888);* The following functions are read_line function for each pixel format supported by VKMS. * * They read a line starting at the point @x_start,@y_start following the @direction. The result -* is stored in @out_pixel and in the format ARGB16161616. +* is stored in @out_pixel and in a 64 bits format, see struct pixel_argb_u16. * * These functions are very repetitive, but the innermost pixel loops must be kept inside these * functions for performance reasons. Some benchmarking was done in [1] where having the innermost
@@ -293,6 +303,96 @@ EXPORT_SYMBOL_IF_KUNIT(argb_u16_from_yuv888);* [1]: https://lore.kernel.org/dri-devel/[email protected]/ */ +static void Rx_read_line (const struct vkms_plane_state *plane,int x_start, +int y_start,enum pixel_read_direction direction,int count, +struct pixel_argb_u16 out_pixel[]) +{ +struct pixel_argb_u16 *end = out_pixel + count; +int bits_per_pixel =drm_format_info_bpp (plane->frame_info->fb->format,0 ); +u8 *src_pixels; +int rem_x, rem_y; + +WARN_ONCE (drm_format_info_block_height (plane->frame_info->fb->format,0 ) !=1 , +"%s() only support formats with block_h == 1" , __func__); + +packed_pixels_addr (plane->frame_info, x_start, y_start,0 , &src_pixels, &rem_x, &rem_y); +int bit_offset = (8 - bits_per_pixel) - rem_x * bits_per_pixel; +int step =get_block_step_bytes (plane->frame_info->fb, direction,0 ); +int mask = (0x1 << bits_per_pixel) -1 ; +int lum_per_level =0xFFFF / mask; + +if (direction ==READ_LEFT_TO_RIGHT || direction ==READ_RIGHT_TO_LEFT ) { +int restart_bit_offset; +int step_bit_offset; + +if (direction ==READ_LEFT_TO_RIGHT ) { + restart_bit_offset =8 - bits_per_pixel; + step_bit_offset = -bits_per_pixel; + }else { + restart_bit_offset =0 ; + step_bit_offset = bits_per_pixel; + } + +while (out_pixel < end) { +u8 val = ((*src_pixels) >> bit_offset) & mask; + + *out_pixel =argb_u16_from_grayu16 ((int )val * lum_per_level); + + bit_offset += step_bit_offset; +if (bit_offset <0 ||8 <= bit_offset) { + bit_offset = restart_bit_offset; + src_pixels += step; + } + out_pixel +=1 ; + } + }else if (direction ==READ_TOP_TO_BOTTOM || direction ==READ_BOTTOM_TO_TOP ) { +while (out_pixel < end) { +u8 val = (*src_pixels >> bit_offset) & mask; + *out_pixel =argb_u16_from_grayu16 ((int )val * lum_per_level); + src_pixels += step; + out_pixel +=1 ; + } + } +} + +static void R1_read_line (const struct vkms_plane_state *plane,int x_start, +int y_start,enum pixel_read_direction direction,int count, +struct pixel_argb_u16 out_pixel[]) +{ +Rx_read_line (plane, x_start, y_start, direction, count, out_pixel); +} + +static void R2_read_line (const struct vkms_plane_state *plane,int x_start, +int y_start,enum pixel_read_direction direction,int count, +struct pixel_argb_u16 out_pixel[]) +{ +Rx_read_line (plane, x_start, y_start, direction, count, out_pixel); +} + +static void R4_read_line (const struct vkms_plane_state *plane,int x_start, +int y_start,enum pixel_read_direction direction,int count, +struct pixel_argb_u16 out_pixel[]) +{ +Rx_read_line (plane, x_start, y_start, direction, count, out_pixel); +} + +static void R8_read_line (const struct vkms_plane_state *plane,int x_start, +int y_start,enum pixel_read_direction direction,int count, +struct pixel_argb_u16 out_pixel[]) +{ +struct pixel_argb_u16 *end = out_pixel + count; +u8 *src_pixels; +int step =get_block_step_bytes (plane->frame_info->fb, direction,0 ); + +packed_pixels_addr_1x1 (plane->frame_info, x_start, y_start,0 , &src_pixels); + +while (out_pixel < end) { + *out_pixel =argb_u16_from_gray8 (*src_pixels); + src_pixels += step; + out_pixel +=1 ; + } +} +static void ARGB8888_read_line (const struct vkms_plane_state *plane,int x_start,int y_start,enum pixel_read_direction direction,int count,struct pixel_argb_u16 out_pixel[])
@@ -604,6 +704,14 @@ pixel_read_line_t get_pixel_read_line_function(u32 format)case DRM_FORMAT_YVU422 :case DRM_FORMAT_YVU444 :return &planar_yuv_read_line; +case DRM_FORMAT_R1 : +return &R1_read_line; +case DRM_FORMAT_R2 : +return &R2_read_line; +case DRM_FORMAT_R4 : +return &R4_read_line; +case DRM_FORMAT_R8 : +return &R8_read_line;default :/* * This is a bug in vkms_plane_atomic_check(). All the supported
drivers/gpu/drm/vkms/vkms_plane.c +4 -0
@@ -30,6 +30,10 @@ static const u32 vkms_formats[] = {DRM_FORMAT_YVU420 ,DRM_FORMAT_YVU422 ,DRM_FORMAT_YVU444 , +DRM_FORMAT_R1 , +DRM_FORMAT_R2 , +DRM_FORMAT_R4 , + DRM_FORMAT_R8, }; static struct drm_plane_state *
Signature · 1 line
2.44.2