Cleanups for ARM64 ACPI
Subsystems (3)
Hanjun Guo
maintainerv2 cover Cleanups for ARM64 ACPI
Cleanups for ARM64 ACPI, first remove some leftover functions in asm/acpi.h, then make acpi_numa_get_nid() invisible to kernel/smp.c for the preparation to move acpi_numa.c to drivers/acpi/arm64/.
ACPI NUMA code for ARM64 are not strictly arch specific, move them to drivers/acpi/arm64/.
From v1:
1. Add patch "ACPI: Make acpi_numa_get_nid() invisible to kernel/smp.c" to do some preparation for moving acpi_numa.c to drivers/acpi/arm64/.
2. Fix the conflict with riscv implementation.
Compiled with ACPI enabled and disabled on ARM64, with ACPI enabled on RISC-V.
Hanjun Guo (4):
ARM64: ACPI: Remove the leftover acpi_init_cpus()
ARM64: ACPI: Remove the leftover arm64_acpi_numa_init()
ARM64: ACPI: Make acpi_numa_get_nid() invisible to kernel/smp.c
ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
arch/arm64/include/asm/acpi.h | 12 ------------
arch/arm64/kernel/Makefile | 1 -
arch/arm64/kernel/smp.c | 5 -----
drivers/acpi/arm64/Makefile | 1 +
.../arm64/kernel => drivers/acpi/arm64}/acpi_numa.c | 8 +++++++-
include/linux/acpi.h | 1 +
6 files changed, 9 insertions(+), 19 deletions(-)
rename {arch/arm64/kernel => drivers/acpi/arm64}/acpi_numa.c (94%)Signature · 1 line
2.25.1
Hanjun Guo
maintainerPATCH v2 1/4 ARM64: ACPI: Remove the leftover acpi_init_cpus()
In commit 0f0783365cbb ("ARM64: kernel: unify ACPI and DT cpus initialization"), function acpi_init_cpus() was removed but the declaration was left in the asm/acpi.h, remove it.
--- arch/arm64/include/asm/acpi.h | 2 -- 1 file changed, 2 deletions(-)
arch/arm64/include/asm/acpi.h +0 -2
@@ -132,10 +132,8 @@ static inline int get_cpu_for_acpi_id(u32 uid) }static inline void arch_fix_phys_package_id (int num,u32 slot) { } -void __init acpi_init_cpus (void );int apei_claim_sea (struct pt_regs *regs);#else -static inline void acpi_init_cpus (void ) { }static inline int apei_claim_sea (struct pt_regs *regs) {return -ENOENT ; }#endif /* CONFIG_ACPI */
Signature · 1 line
2.25.1
Hanjun Guo
maintainerPATCH v2 2/4 ARM64: ACPI: Remove the leftover arm64_acpi_numa_init()
In reply to Hanjun GuoIn commit eb75541f8b45 ("arm64, numa: Change the numa init functions name to be generic"), arm64_acpi_numa_init() was renamed to arch_acpi_numa_init() and be static, so the leftover arm64_acpi_numa_init() in head file should be removed.
--- arch/arm64/include/asm/acpi.h | 2 -- 1 file changed, 2 deletions(-)
arch/arm64/include/asm/acpi.h +0 -2
@@ -175,11 +175,9 @@ static inline pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr)#endif /* CONFIG_ACPI_APEI */ #ifdef CONFIG_ACPI_NUMA -int arm64_acpi_numa_init (void );int acpi_numa_get_nid (unsigned int cpu);void acpi_map_cpus_to_nodes (void );#else -static inline int arm64_acpi_numa_init (void ) {return -ENOSYS ; }static inline int acpi_numa_get_nid (unsigned int cpu) {return NUMA_NO_NODE ; }static inline void acpi_map_cpus_to_nodes (void ) { }#endif /* CONFIG_ACPI_NUMA */
Signature · 1 line
2.25.1
Hanjun Guo
maintainerPATCH v2 3/4 ARM64: ACPI: Make acpi_numa_get_nid() invisible to kernel/smp.c
In reply to Hanjun GuoTo do the preparation of moving acpi_numa.c to drivers/acpi/arm64, Make acpi_numa_get_nid() invisible to kernel/smp.c, with less export functions.
--- arch/arm64/include/asm/acpi.h | 2 -- arch/arm64/kernel/acpi_numa.c | 8 +++++++- arch/arm64/kernel/smp.c | 5 ----- 3 files changed, 7 insertions(+), 8 deletions(-)
arch/arm64/include/asm/acpi.h +0 -2
@@ -175,10 +175,8 @@ static inline pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr)#endif /* CONFIG_ACPI_APEI */ #ifdef CONFIG_ACPI_NUMA -int acpi_numa_get_nid (unsigned int cpu);void acpi_map_cpus_to_nodes (void );#else -static inline int acpi_numa_get_nid (unsigned int cpu) {return NUMA_NO_NODE ; }static inline void acpi_map_cpus_to_nodes (void ) { }#endif /* CONFIG_ACPI_NUMA */
arch/arm64/kernel/acpi_numa.c +7 -1
@@ -29,7 +29,7 @@static int acpi_early_node_map[NR_CPUS ]__initdata = {NUMA_NO_NODE }; -int __init acpi_numa_get_nid (unsigned int cpu) +static int __init acpi_numa_get_nid (unsigned int cpu) {return acpi_early_node_map[cpu]; }
@@ -72,9 +72,15 @@ static int __init acpi_parse_gicc_pxm(union acpi_subtable_headers *header,void __init acpi_map_cpus_to_nodes (void ) { +int i; +acpi_table_parse_entries (ACPI_SIG_SRAT ,sizeof (struct acpi_table_srat ),ACPI_SRAT_TYPE_GICC_AFFINITY , acpi_parse_gicc_pxm,0 ); + +for (i =0 ; i < nr_cpu_ids; i++) +early_map_cpu_to_node (i,acpi_numa_get_nid (i)); + }/* Callback for Proximity Domain -> ACPI processor UID mapping */
arch/arm64/kernel/smp.c +0 -5
@@ -650,8 +650,6 @@ acpi_parse_gic_cpu_interface(union acpi_subtable_headers *header,static void __init acpi_parse_and_init_cpus (void ) { -int i; -/* * do a walk of MADT to determine how many CPUs * we have including disabled CPUs, and get information
@@ -669,9 +667,6 @@ static void __init acpi_parse_and_init_cpus(void)* as separate steps. */ acpi_map_cpus_to_nodes(); - -for (i =0 ; i < nr_cpu_ids; i++) - early_map_cpu_to_node(i, acpi_numa_get_nid(i)); }#else #define acpi_parse_and_init_cpus (...) do { } while (0)
Signature · 1 line
2.25.1
Hanjun Guo
maintainerPATCH v2 4/4 ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
In reply to Hanjun GuoThe ARM64 ACPI NUMA code can be moved out of arm64 arch code as it just related to ACPI NUMA table parsing, mappings for ACPI numa node and cpu, so move the ACPI NUMA code to drivers/acpi/arm64/.
Since arm64 selects ACPI_NUMA by default if ACPI=y, just move the function definitions under CONFIG_ARM64 in linux/acpi.h, as the caller of acpi_map_cpus_to_nodes() is only with ACPI selected, so no inline function is needed, this will solve the conflict with riscv implementation as well.
---
arch/arm64/include/asm/acpi.h | 6 ------
arch/arm64/kernel/Makefile | 1 -
drivers/acpi/arm64/Makefile | 1 +
{arch/arm64/kernel => drivers/acpi/arm64}/acpi_numa.c | 0
include/linux/acpi.h | 1 +
5 files changed, 2 insertions(+), 7 deletions(-)
rename {arch/arm64/kernel => drivers/acpi/arm64}/acpi_numa.c (100%)arch/arm64/include/asm/acpi.h +0 -6
@@ -174,12 +174,6 @@ static inline pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr) }#endif /* CONFIG_ACPI_APEI */ -#ifdef CONFIG_ACPI_NUMA -void acpi_map_cpus_to_nodes (void ); -#else -static inline void acpi_map_cpus_to_nodes (void ) { } -#endif /* CONFIG_ACPI_NUMA */ -#define ACPI_TABLE_UPGRADE_MAX_PHYS MEMBLOCK_ALLOC_ACCESSIBLE#endif /*_ASM_ACPI_H*/
arch/arm64/kernel/Makefile +0 -1
@@ -52,7 +52,6 @@ obj-$(CONFIG_EFI) += efi.o efi-rt-wrapper.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o obj-$(CONFIG_ACPI) += acpi.o -obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o obj-$(CONFIG_ARM64_ACPI_PARKING_PROTOCOL) += acpi_parking_protocol.o obj-$(CONFIG_PARAVIRT) += paravirt.o obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
drivers/acpi/arm64/Makefile +1 -0
@@ -4,6 +4,7 @@ obj-$(CONFIG_ACPI_APMT) += apmt.o obj-$(CONFIG_ACPI_FFH) += ffh.o obj-$(CONFIG_ACPI_GTDT) += gtdt.o obj-$(CONFIG_ACPI_IORT) += iort.o +obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o obj-$(CONFIG_ACPI_PROCESSOR_IDLE) += cpuidle.o obj-$(CONFIG_ARM_AMBA) += amba.o obj-y += dma.o init.o
drivers/acpi/arm64/acpi_numa.c renamed from arch/arm64/kernel/acpi_numa.c +0 -0
include/linux/acpi.h +1 -0
@@ -253,6 +253,7 @@ static inline void acpi_arch_dma_setup(struct device *dev) { }#endif #ifdef CONFIG_ARM64 +void acpi_map_cpus_to_nodes (void );void acpi_numa_gicc_affinity_init (struct acpi_srat_gicc_affinity *pa);#else static inline void
Signature · 1 line
2.25.1
kernel test robot
build botRe: [PATCH v2 4/4] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
kernel test robot noticed the following build errors:
Hi Hanjun,
kernel test robot noticed the following build errors:
[auto build test ERROR on arm64/for-next/core]
[also build test ERROR on rafael-pm/linux-next rafael-pm/bleeding-edge linus/master v6.11-rc3 next-20240809] [cannot apply to arm-perf/for-next/perf]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Hanjun-Guo/ARM64-ACPI-Remove-the-leftover-acpi_init_cpus/20240811-122442 base: https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git for-next/core patch link: https://lore.kernel.org/r/20240811042303.3498761-5-guohanjun%40huawei.com patch subject: [PATCH v2 4/4] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/ config: arm64-randconfig-001-20240812 (https://download.01.org/0day-ci/archive/20240812/[email protected]/config) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240812/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
aarch64-linux-ld: Unexpected GOT/PLT entries detected!
aarch64-linux-ld: Unexpected run-time procedure linkages detected!
aarch64-linux-ld: arch/arm64/kernel/smp.o: in function `smp_init_cpus':
>> arch/arm64/kernel/smp.c:669:(.init.text+0x424): undefined reference to `acpi_map_cpus_to_nodes'
vim +669 arch/arm64/kernel/smp.c
e189624916961c Lorenzo Pieralisi 2018-06-25 650
e189624916961c Lorenzo Pieralisi 2018-06-25 651 static void __init acpi_parse_and_init_cpus(void)
e189624916961c Lorenzo Pieralisi 2018-06-25 652 {
e189624916961c Lorenzo Pieralisi 2018-06-25 653 /*
e189624916961c Lorenzo Pieralisi 2018-06-25 654 * do a walk of MADT to determine how many CPUs
e189624916961c Lorenzo Pieralisi 2018-06-25 655 * we have including disabled CPUs, and get information
e189624916961c Lorenzo Pieralisi 2018-06-25 656 * we need for SMP init.
e189624916961c Lorenzo Pieralisi 2018-06-25 657 */
e189624916961c Lorenzo Pieralisi 2018-06-25 658 acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
e189624916961c Lorenzo Pieralisi 2018-06-25 659 acpi_parse_gic_cpu_interface, 0);
e189624916961c Lorenzo Pieralisi 2018-06-25 660
e189624916961c Lorenzo Pieralisi 2018-06-25 661 /*
e189624916961c Lorenzo Pieralisi 2018-06-25 662 * In ACPI, SMP and CPU NUMA information is provided in separate
e189624916961c Lorenzo Pieralisi 2018-06-25 663 * static tables, namely the MADT and the SRAT.
e189624916961c Lorenzo Pieralisi 2018-06-25 664 *
e189624916961c Lorenzo Pieralisi 2018-06-25 665 * Thus, it is simpler to first create the cpu logical map through
e189624916961c Lorenzo Pieralisi 2018-06-25 666 * an MADT walk and then map the logical cpus to their node ids
e189624916961c Lorenzo Pieralisi 2018-06-25 667 * as separate steps.
e189624916961c Lorenzo Pieralisi 2018-06-25 668 */
e189624916961c Lorenzo Pieralisi 2018-06-25 @669 acpi_map_cpus_to_nodes();
e189624916961c Lorenzo Pieralisi 2018-06-25 670 }
0f0783365cbb7e Lorenzo Pieralisi 2015-05-13 671 #else
e189624916961c Lorenzo Pieralisi 2018-06-25 672 #define acpi_parse_and_init_cpus(...) do { } while (0)
0f0783365cbb7e Lorenzo Pieralisi 2015-05-13 673 #endif0f0783365cbb7e Lorenzo Pieralisi 2015-05-13 674
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Hanjun Guo
maintainerRe: [PATCH v2 4/4] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
Quoted 24 lines · kernel test robot
Hi Hanjun,
kernel test robot noticed the following build errors:
[auto build test ERROR on arm64/for-next/core]
[also build test ERROR on rafael-pm/linux-next rafael-pm/bleeding-edge linus/master v6.11-rc3 next-20240809] [cannot apply to arm-perf/for-next/perf]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]url: https://github.com/intel-lab-lkp/linux/commits/Hanjun-Guo/ARM64-ACPI-Remove-the-leftover-acpi_init_cpus/20240811-122442 base: https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git for-next/core patch link: https://lore.kernel.org/r/20240811042303.3498761-5-guohanjun%40huawei.com patch subject: [PATCH v2 4/4] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/ config: arm64-randconfig-001-20240812 (https://download.01.org/0day-ci/archive/20240812/[email protected]/config) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240812/[email protected]/reproduce)If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Quoted 6 lines
All errors (new ones prefixed by >>):
aarch64-linux-ld: Unexpected GOT/PLT entries detected!
aarch64-linux-ld: Unexpected run-time procedure linkages detected!
aarch64-linux-ld:arch/arm64/kernel/smp.o: in function `smp_init_cpus':Quoted 1 line
Quoted 1 line
arch/arm64/kernel/smp.c:669:(.init.text+0x424): undefined reference to `acpi_map_cpus_to_nodes'
Good catch, I missed the random config which CONFIG_NUMA is not set.
Thanks
Hanjun