dt-bindings: input: convert rotary-encoder to yaml
Subsystems (4)
Frank Li
maintainerPATCH 1/1 dt-bindings: input: convert rotary-encoder to yaml
Convert binding doc rotary-encoder.txt to yaml format.
Additional change:
- Only keep one example.
Fix below warning:arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
failed to match any schema with compatible: ['rotary-encoder']
--- .../bindings/input/rotary-encoder.txt | 50 ----------- .../bindings/input/rotary-encoder.yaml | 90 +++++++++++++++++++ 2 files changed, 90 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.txt create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.yaml
Documentation/devicetree/bindings/input/rotary-encoder.txt deleted +0 -50
@@ -1,50 +0,0 @@ -Rotary encoder DT bindings - -Required properties: -- gpios: a spec for at least two GPIOs to be used, most significant first - -Optional properties: -- linux,axis: the input subsystem axis to map to this rotary encoder. - Defaults to 0 (ABS_X / REL_X) -- rotary-encoder,steps: Number of steps in a full turnaround of the - encoder. Only relevant for absolute axis. Defaults to 24 which is a - typical value for such devices. -- rotary-encoder,relative-axis: register a relative axis rather than an - absolute one. Relative axis will only generate +1/-1 events on the input - device, hence no steps need to be passed. -- rotary-encoder,rollover: Automatic rollover when the rotary value becomes - greater than the specified steps or smaller than 0. For absolute axis only. -- rotary-encoder,steps-per-period: Number of steps (stable states) per period. - The values have the following meaning: - 1: Full-period mode (default) - 2: Half-period mode - 4: Quarter-period mode -- wakeup-source: Boolean, rotary encoder can wake up the system. -- rotary-encoder,encoding: String, the method used to encode steps. - Supported are "gray" (the default and more common) and "binary". - -Deprecated properties: -- rotary-encoder,half-period: Makes the driver work on half-period mode. - This property is deprecated. Instead, a 'steps-per-period ' value should - be used, such as "rotary-encoder,steps-per-period = <2>". - -See Documentation/input/devices/rotary-encoder.rst for more information. - -Example: - - rotary@0 { - compatible = "rotary-encoder"; - gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */ - linux,axis = <0>; /* REL_X */ - rotary-encoder,encoding = "gray"; - rotary-encoder,relative-axis; - }; - - rotary@1 { - compatible = "rotary-encoder"; - gpios = <&gpio 21 0>, <&gpio 22 0>; - linux,axis = <1>; /* ABS_Y */ - rotary-encoder,steps = <24>; - rotary-encoder,encoding = "binary"; - rotary-encoder,rollover; - };
Documentation/devicetree/bindings/input/rotary-encoder.yaml new file +90 -0
90 lines not on this page · raw message
Signature · 1 line
2.34.1
Quoted 9 lines · Frank Li
Convert binding doc rotary-encoder.txt to yaml format.
Additional change:
- Only keep one example.Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
failed to match any schema with compatible: ['rotary-encoder']
Quoted 8 lines
Signed-off-by Frank Li <[email protected]>--- .../bindings/input/rotary-encoder.txt | 50 ----------- .../bindings/input/rotary-encoder.yaml | 90 +++++++++++++++++++ 2 files changed, 90 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.txt create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.yaml
Frank Li
maintainerQuoted 20 lines · Rob Herring (Arm)
Quoted 9 lines · Frank Li
Convert binding doc rotary-encoder.txt to yaml format.
Additional change:
- Only keep one example.Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
failed to match any schema with compatible: ['rotary-encoder']Quoted 8 lines
Signed-off-by Frank Li <[email protected]>--- .../bindings/input/rotary-encoder.txt | 50 ----------- .../bindings/input/rotary-encoder.yaml | 90 +++++++++++++++++++ 2 files changed, 90 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.txt create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.yaml
Quoted 1 line
Reviewed-by Rob Herring (Arm) <[email protected]>
Dmitry:
Could you take care this patch?
Frank
Quoted 1 line
Quoted 10 lines · Frank Li
Convert binding doc rotary-encoder.txt to yaml format.
Additional change:
- Only keep one example.Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
failed to match any schema with compatible: ['rotary-encoder']Signed-off-by Frank Li <[email protected]>
Applied, thank you.
Signature · 1 line
Dmitry