Skip to contentSkip to conversation

Add input voltage suppliers for PMIC MCP16502 regulators

PATCH Applied Andrei Simion 5 participants 12 messages Aug 12, 2024 – Aug 24, 2024

Subsystems (4)
lore
Share & tools
lore

Andrei Simion

author maintainer
#0 lore raw

v2 cover Add input voltage suppliers for PMIC MCP16502 regulators

In this series of patches, support for the *-supply property [1] is added (correlated with supply_name [2]) from the core regulator.
Link [1]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L471
Link [2]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L2064

I modified the mcp16502.c driver and the dts that use this PMIC.
We added these improvements to provide a complete description of the board power scheme.

Snippet (as an example) from /sys/kernel/debug/regulator/regulator_summary (for at91-sama7g5ek):

 # cat regulator_summary
 regulator                      use open bypass  opmode voltage current     min     max
---------------------------------------------------------------------------------------
 regulator-dummy                  1    0      0 unknown     0mV     0mA     0mV     0mV
 5V_MAIN                          6    6      0 unknown  5000mV     0mA  5000mV  5000mV
    VDD_IO                        5    4      0  normal  3300mV     0mA  3300mV  3300mV
       e1208000.mmc-vqmmc         1                                 0mA     0mV     0mV
       e1208000.mmc-vmmc          1                                 0mA  3300mV  3400mV
       e1204000.mmc-vmmc          1                                 0mA  3300mV  3400mV
       VDDOUT25                   3    2      0 unknown  2500mV     0mA  2500mV  2500mV
          e1000000.adc-vref       1                                 0mA     0mV     0mV
          e1000000.adc-vddana     1                                 0mA     0mV     0mV
    VDD_DDR                       1    0      0  normal  1350mV     0mA  1350mV  1350mV
    VDD_CORE                      1    0      0  normal  1150mV     0mA  1150mV  1150mV
    VDD_OTHER                     2    1      0  normal  1050mV     0mA  1050mV  1250mV
       cpu0-cpu                   1                                 0mA  1050mV  1225mV
    LDO1                          2    1      0 unknown  1800mV     0mA  1800mV  1800mV
       e1204000.mmc-vqmmc         1                                 0mA     0mV     0mV
    LDO2

-------------------------------------------------------------------------------------------

Changelog:

v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add voltage input supply documentation in the yaml schema
- add lvin-supply, pvin[1-4]-supply to PMIC node

Andrei Simion (7):
regulator: mcp16502: Add supplier for regulators
regulator: dt-bindings: microchip,mcp16502: Add voltage input supply
documentation
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply
PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC
nodes
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC
nodes

 .../regulator/microchip,mcp16502.yaml         | 20 +++++++++++++++++++
 .../dts/microchip/at91-sama5d27_wlsom1.dtsi   | 13 ++++++++++++
 .../dts/microchip/at91-sama5d29_curiosity.dts | 13 ++++++++++++
 .../boot/dts/microchip/at91-sama5d2_icp.dts   | 13 ++++++++++++
 .../dts/microchip/at91-sama7g54_curiosity.dts | 13 ++++++++++++
 .../arm/boot/dts/microchip/at91-sama7g5ek.dts | 13 ++++++++++++
 drivers/regulator/mcp16502.c                  | 17 ++++++++--------
 7 files changed, 94 insertions(+), 8 deletions(-)

base-commit: 9e6869691724b12e1f43655eeedc35fade38120c

Signature · 1 line
2.34.1
author maintainer
#1 lore raw

PATCH v2 1/7 regulator: mcp16502: Add supplier for regulators

Based on the datasheet [1] (Block Diagram) PVIN[1-4] and LVIN represent the input voltage supply for each BUCKs respective LDOs. Update the driver to align with the datasheet [1].

[1]: https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP16502-Data-Sheet-DS20006275.pdf

---
v1 -> v2:
- no update

---
 drivers/regulator/mcp16502.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
drivers/regulator/mcp16502.c +9 -8
index 5de9d4fa5113..b34ae0bbba6f 100644
@@ -107,9 +107,10 @@ static unsigned int mcp16502_of_map_mode(unsigned int mode)
 	return REGULATOR_MODE_INVALID;
 }
 
-#define MCP16502_REGULATOR(_name, _id, _ranges, _ops, _ramp_table)	\
+#define MCP16502_REGULATOR(_name, _id, _sn, _ranges, _ops, _ramp_table)	\
 	[_id] = {							\
 		.name			= _name,			\
+		.supply_name		= #_sn,				\
 		.regulators_node	= "regulators",			\
 		.id			= _id,				\
 		.ops			= &(_ops),			\
@@ -467,18 +468,18 @@ static const struct linear_range b234_ranges[] = {
 };
 
 static const struct regulator_desc mcp16502_desc[] = {
-	/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops, ramp_table) */
-	MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops,
+	/* MCP16502_REGULATOR(_name, _id, _sn, _ranges, _ops, _ramp_table) */
+	MCP16502_REGULATOR("VDD_IO", BUCK1, pvin1, b1l12_ranges, mcp16502_buck_ops,
 			   mcp16502_ramp_b1l12),
-	MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops,
+	MCP16502_REGULATOR("VDD_DDR", BUCK2, pvin2, b234_ranges, mcp16502_buck_ops,
 			   mcp16502_ramp_b234),
-	MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops,
+	MCP16502_REGULATOR("VDD_CORE", BUCK3, pvin3, b234_ranges, mcp16502_buck_ops,
 			   mcp16502_ramp_b234),
-	MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops,
+	MCP16502_REGULATOR("VDD_OTHER", BUCK4, pvin4, b234_ranges, mcp16502_buck_ops,
 			   mcp16502_ramp_b234),
-	MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops,
+	MCP16502_REGULATOR("LDO1", LDO1, lvin, b1l12_ranges, mcp16502_ldo_ops,
 			   mcp16502_ramp_b1l12),
-	MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops,
+	MCP16502_REGULATOR("LDO2", LDO2, lvin, b1l12_ranges, mcp16502_ldo_ops,
 			   mcp16502_ramp_b1l12)
 };
 
Signature · 1 line
2.34.1
author maintainer
#2 lore raw

PATCH v2 2/7 regulator: dt-bindings: microchip,mcp16502: Add voltage input supply documentation

In reply to Andrei Simion

Update the yaml schema with info about input supply phandle for each buck and ldo according with the PMIC MCP16502 Datasheet.

---
v1 -> v2:
- added in v2

---
 .../regulator/microchip,mcp16502.yaml         | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml +20 -0
index 1aca3646789e..c3e1fc6e260e 100644
@@ -28,6 +28,21 @@ properties:
   reg:
     maxItems: 1
 
+  lvin-supply:
+    description: Input supply phandle for LDO1 and LDO2
+
+  pvin1-supply:
+    description: Input supply phandle for VDD_IO (BUCK1)
+
+  pvin2-supply:
+    description: Input supply phandle for VDD_DDR (BUCK2)
+
+  pvin3-supply:
+    description: Input supply phandle for VDD_CORE (BUCK3)
+
+  pvin4-supply:
+    description: Input supply phandle for VDD_OTHER (BUCK4)
+
   regulators:
     type: object
     additionalProperties: false
@@ -68,6 +83,11 @@ examples:
         pmic@5b {
             compatible = "microchip,mcp16502";
             reg = <0x5b>;
+            lvin-supply = <&reg_5v>;
+            pvin1-supply = <&reg_5v>;
+            pvin2-supply = <&reg_5v>;
+            pvin3-supply = <&reg_5v>;
+            pvin4-supply = <&reg_5v>;
 
             regulators {
                 VDD_IO {
Signature · 1 line
2.34.1
Reviewed-by on v2 2/7
#3 lore raw

Re: [PATCH v2 2/7] regulator: dt-bindings: microchip,mcp16502: Add voltage input supply documentation

Quoted 16 lines · Andrei Simion

Update the yaml schema with info about input supply phandle for each buck and ldo according with the PMIC MCP16502 Datasheet.

---
v1 -> v2:
- added in v2

---
 .../regulator/microchip,mcp16502.yaml         | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml +0 -0
index 1aca3646789e..c3e1fc6e260e 100644

Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml properties: · line 32

Quoted 5 lines
Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml +2 -0
@@ -28,6 +28,21 @@ properties:
   reg:
     maxItems: 1
 
+  lvin-supply:
+    description: Input supply phandle for LDO1 and LDO2

If there is going to be respin, drop phandle. Stating obvious is not helping - you describe here hardware, not DT.

Best regards,
Krzysztof

author maintainer
#4 lore raw

PATCH v2 3/7 ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes

In reply to Andrei Simion

Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply.

---
v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add lvin-supply, pvin[1-4]-supply to PMIC node

---
 arch/arm/boot/dts/microchip/at91-sama7g5ek.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/arm/boot/dts/microchip/at91-sama7g5ek.dts +13 -0
index 40f4480e298b..ed75d491a246 100644
@@ -88,6 +88,14 @@ memory@60000000 {
 		reg = <0x60000000 0x20000000>;
 	};
 
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 	sound: sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "sama7g5ek audio";
@@ -239,6 +247,11 @@ i2c1: i2c@600 {
 		mcp16502@5b {
 			compatible = "microchip,mcp16502";
 			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
 			status = "okay";
 
 			regulators {
Signature · 1 line
2.34.1
author maintainer
#5 lore raw

PATCH v2 4/7 ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes

In reply to Andrei Simion

Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply.

---
v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add lvin-supply, pvin[1-4]-supply to PMIC node

---
 .../boot/dts/microchip/at91-sama7g54_curiosity.dts  | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts +13 -0
index 009d2c832421..645e49fdb7fe 100644
@@ -72,6 +72,14 @@ memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */
 	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -189,6 +197,11 @@ eeprom@51 {
 		pmic@5b {
 			compatible = "microchip,mcp16502";
 			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
 
 			regulators {
 				vdd_3v3: VDD_IO {
Signature · 1 line
2.34.1
author maintainer
#6 lore raw

PATCH v2 5/7 ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes

In reply to Andrei Simion

Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply.

---
v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add lvin-supply, pvin[1-4]-supply to PMIC node

---
 arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts +13 -0
index 999adeca6f33..5e2bb517a480 100644
@@ -78,6 +78,14 @@ led-blue {
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -190,6 +198,11 @@ i2c6: i2c@600 {
 		mcp16502@5b {
 			compatible = "microchip,mcp16502";
 			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
 			status = "okay";
 			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
 
Signature · 1 line
2.34.1
author maintainer
#7 lore raw

PATCH v2 6/7 ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes

In reply to Andrei Simion

Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply.

---
v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add lvin-supply, pvin[1-4]-supply to PMIC node

---
 .../boot/dts/microchip/at91-sama5d27_wlsom1.dtsi    | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi +13 -0
index 4617805c7748..c173f49cb910 100644
@@ -31,6 +31,14 @@ main_xtal {
 		};
 	};
 
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-wilc1000";
 		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
@@ -70,6 +78,11 @@ &i2c1 {
 	mcp16502@5b {
 		compatible = "microchip,mcp16502";
 		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
 		status = "okay";
 		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
 
Signature · 1 line
2.34.1
author maintainer
#8 lore raw

PATCH v2 7/7 ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes

In reply to Andrei Simion

Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply.

---
v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add lvin-supply, pvin[1-4]-supply to PMIC node

---
 .../boot/dts/microchip/at91-sama5d29_curiosity.dts  | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts +13 -0
index 6b02b7bcfd49..951a0c97d3c6 100644
@@ -84,6 +84,14 @@ memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x20000000>;
 	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -144,6 +152,11 @@ &i2c0 {
 	mcp16502@5b {
 		compatible = "microchip,mcp16502";
 		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
 		status = "okay";
 		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
 
Signature · 1 line
2.34.1
#9 lore raw
In reply to Andrei Simion
Quoted 62 lines · Andrei Simion

In this series of patches, support for the *-supply property [1] is added (correlated with supply_name [2]) from the core regulator.
Link [1]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L471
Link [2]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L2064

I modified the mcp16502.c driver and the dts that use this PMIC.
We added these improvements to provide a complete description of the board power scheme.

Snippet (as an example) from /sys/kernel/debug/regulator/regulator_summary (for at91-sama7g5ek):

 # cat regulator_summary
 regulator                      use open bypass  opmode voltage current     min     max
---------------------------------------------------------------------------------------
 regulator-dummy                  1    0      0 unknown     0mV     0mA     0mV     0mV
 5V_MAIN                          6    6      0 unknown  5000mV     0mA  5000mV  5000mV
    VDD_IO                        5    4      0  normal  3300mV     0mA  3300mV  3300mV
       e1208000.mmc-vqmmc         1                                 0mA     0mV     0mV
       e1208000.mmc-vmmc          1                                 0mA  3300mV  3400mV
       e1204000.mmc-vmmc          1                                 0mA  3300mV  3400mV
       VDDOUT25                   3    2      0 unknown  2500mV     0mA  2500mV  2500mV
          e1000000.adc-vref       1                                 0mA     0mV     0mV
          e1000000.adc-vddana     1                                 0mA     0mV     0mV
    VDD_DDR                       1    0      0  normal  1350mV     0mA  1350mV  1350mV
    VDD_CORE                      1    0      0  normal  1150mV     0mA  1150mV  1150mV
    VDD_OTHER                     2    1      0  normal  1050mV     0mA  1050mV  1250mV
       cpu0-cpu                   1                                 0mA  1050mV  1225mV
    LDO1                          2    1      0 unknown  1800mV     0mA  1800mV  1800mV
       e1204000.mmc-vqmmc         1                                 0mA     0mV     0mV
    LDO2

-------------------------------------------------------------------------------------------

Changelog:

v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add voltage input supply documentation in the yaml schema
- add lvin-supply, pvin[1-4]-supply to PMIC node

Andrei Simion (7):
regulator: mcp16502: Add supplier for regulators
regulator: dt-bindings: microchip,mcp16502: Add voltage input supply
documentation
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply
PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC
nodes
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC
nodes

 .../regulator/microchip,mcp16502.yaml         | 20 +++++++++++++++++++
 .../dts/microchip/at91-sama5d27_wlsom1.dtsi   | 13 ++++++++++++
 .../dts/microchip/at91-sama5d29_curiosity.dts | 13 ++++++++++++
 .../boot/dts/microchip/at91-sama5d2_icp.dts   | 13 ++++++++++++
 .../dts/microchip/at91-sama7g54_curiosity.dts | 13 ++++++++++++
 .../arm/boot/dts/microchip/at91-sama7g5ek.dts | 13 ++++++++++++
 drivers/regulator/mcp16502.c                  | 17 ++++++++--------
 7 files changed, 94 insertions(+), 8 deletions(-)
Quoted 6 lines

base-commit: 9e6869691724b12e1f43655eeedc35fade38120c --
2.34.1

My bot found new DTB warnings on the .dts files added or changed in this series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date:

  pip3 install dtschema --upgrade

New warnings running 'make CHECK_DTBS=y microchip/at91-sama5d29_curiosity.dtb microchip/at91-sama5d2_icp.dtb microchip/at91-sama7g54_curiosity.dtb microchip/at91-sama7g5ek.dtb' for [email protected]:

arch/arm/boot/dts/microchip/at91-sama7g5ek.dtb: /soc/chipid@e0020000: failed to match any schema with compatible: ['microchip,sama7g5-chipid'] arch/arm/boot/dts/microchip/at91-sama7g5ek.dtb: /soc/mmc@e120c000: failed to match any schema with compatible: ['microchip,sama7g5-sdhci', 'microchip,sam9x60-sdhci'] arch/arm/boot/dts/microchip/at91-sama7g5ek.dtb: /soc/mmc@e120c000: failed to match any schema with compatible: ['microchip,sama7g5-sdhci', 'microchip,sam9x60-sdhci']

maintainer
#10 lore raw

Re: (subset) [PATCH v2 0/7] Add input voltage suppliers for PMIC MCP16502 regulators

In reply to Andrei Simion
Quoted 9 lines · Andrei Simion

In this series of patches, support for the *-supply property [1] is added (correlated with supply_name [2]) from the core regulator.
Link [1]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L471
Link [2]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L2064

I modified the mcp16502.c driver and the dts that use this PMIC.
We added these improvements to provide a complete description of the board power scheme.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/7] regulator: mcp16502: Add supplier for regulators

      commit: 861289835002b733aa8715442ba555b1daa84baa
[2/7] regulator: dt-bindings: microchip,mcp16502: Add voltage input supply documentation
      commit: bf5ba94fa0b90c9433167bf143780af6c8805479

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

maintainer Applied
#11 lore raw
In reply to Andrei Simion
Quoted 5 lines · Andrei Simion

In this series of patches, support for the *-supply property [1] is added (correlated with supply_name [2]) from the core regulator.
Link [1]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L471
Link [2]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L2064

[ ... ]

Quoted 2 lines

Andrei Simion (7):

[ ... ]

Quoted 8 lines

ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply
PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC
nodes
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC
nodes

Applied to at91-dt, thanks!