support nocsr patterns for calls to kfuncs
Subsystems (4)
Eduard Zingerman
maintainercover support nocsr patterns for calls to kfuncs
As an extension of [1], allow nocsr patterns recognition for kfuncs:
- pattern rules are the same as for helpers;
- spill/fill removal is allowed only for kfuncs marked with KF_NOCSR flag;
Mark bpf_cast_to_kern_ctx() and bpf_rdonly_cast() kfuncs as KF_NOCSR in order to conjure selftests for this feature.
After this patch-set verifier would rewrite the program below:
r2 = 1
*(u64 *)(r10 - 32) = r2
call %[bpf_cast_to_kern_ctx]
r2 = *(u64 *)(r10 - 32)
r0 = r2;"
As follows:
r2 = 1 /* spill/fill at r10[-32] is removed */
r0 = r1 /* replacement for bpf_cast_to_kern_ctx() */ r0 = r2
exit
[1] no_caller_saved_registers attribute for helper calls
https://lore.kernel.org/bpf/[email protected]/
Eduard Zingerman (3):
bpf: support nocsr patterns for calls to kfuncs
bpf: mark bpf_cast_to_kern_ctx and bpf_rdonly_cast as KF_NOCSR selftests/bpf: check if nocsr pattern is recognized for kfuncs
include/linux/btf.h | 1 + kernel/bpf/helpers.c | 4 +- kernel/bpf/verifier.c | 37 ++++++++++++++ .../selftests/bpf/progs/verifier_nocsr.c | 50 +++++++++++++++++++ 4 files changed, 90 insertions(+), 2 deletions(-)
Signature · 1 line
2.45.2
Eduard Zingerman
maintainerPATCH 1/3 bpf: support nocsr patterns for calls to kfuncs
Recognize nocsr patterns around kfunc calls.
For example, suppose bpf_cast_to_kern_ctx() follows nocsr contract (which it does, it is rewritten by verifier as "r0 = r1" insn), in such a case, rewrite BPF program below:
r2 = 1; *(u64 *)(r10 - 32) = r2; call %[bpf_cast_to_kern_ctx]; r2 = *(u64 *)(r10 - 32); r0 = r2;
Removing the spill/fill pair:
r2 = 1; call %[bpf_cast_to_kern_ctx]; r0 = r2;
Add a KF_NOCSR flag to mark kfuncs that follow nocsr contract.
--- include/linux/btf.h | 1 + kernel/bpf/verifier.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+)
include/linux/btf.h +1 -0
@@ -75,6 +75,7 @@#define KF_ITER_NEXT (1 << 9)/* kfunc implements BPF iter next method */ #define KF_ITER_DESTROY (1 << 10)/* kfunc implements BPF iter destructor */ #define KF_RCU_PROTECTED (1 << 11)/* kfunc should be protected by rcu cs when they are invoked */ +#define KF_NOCSR (1 << 12)/* kfunc follows nocsr calling contract */ /* * Tag marking a kernel function as a kfunc. This is meant to minimize the
kernel/bpf/verifier.c +36 -0
@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } } +/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */ +static u32 kfunc_nocsr_clobber_mask (struct bpf_kfunc_call_arg_meta *meta) +{ +const struct btf_param *params; +u32 vlen, i, mask; + + params =btf_params (meta->func_proto); + vlen =btf_type_vlen (meta->func_proto); + mask =0 ; +if (!btf_type_is_void (btf_type_by_id (meta->btf, meta->func_proto->type))) + mask |=BIT (BPF_REG_0 ); +for (i =0 ; i < vlen; ++i) + mask |=BIT (BPF_REG_1 + i); +return mask; +} + +/* Same as verifier_inlines_helper_call() but for kfuncs, see comment above */ +static bool verifier_inlines_kfunc_call (struct bpf_kfunc_call_arg_meta *meta) +{ +return false; +} +/* GCC and LLVM define a no_caller_saved_registers function attribute. * This attribute means that function scratches only some of * the caller saved registers defined by ABI.
@@ -16238,6 +16260,20 @@ static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, bpf_jit_inlines_helper_call(call->imm)); } +if (bpf_pseudo_kfunc_call (call)) { +struct bpf_kfunc_call_arg_meta meta; +int err; + + err =fetch_kfunc_meta (env, call, &meta,NULL ); +if (err <0 ) +/* error would be reported later */ +return ; + + clobbered_regs_mask =kfunc_nocsr_clobber_mask (&meta); + can_be_inlined = (meta.kfunc_flags &KF_NOCSR ) && +verifier_inlines_kfunc_call (&meta); + } +if (clobbered_regs_mask ==ALL_CALLER_SAVED_REGS )return ;
Signature · 1 line
2.45.2
Yonghong Song
reviewerRe: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
Quoted 11 lines · Eduard Zingerman
Recognize nocsr patterns around kfunc calls.
For example, supposebpf_cast_to_kern_ctx()follows nocsr contract (which it does, it is rewritten by verifier as "r0 = r1" insn), in such a case, rewrite BPF program below:r2 = 1; *(u64 *)(r10 - 32) = r2; call %[bpf_cast_to_kern_ctx]; r2 = *(u64 *)(r10 - 32); r0 = r2;
Quoted 5 lines
Removing the spill/fill pair:
r2 = 1; call %[bpf_cast_to_kern_ctx]; r0 = r2;
I can see this indeed a good optimization esp. when there is a register pressure for the program, and like above r2 has to be spilled. Using nocsr for bpf_cast_to_kern_ctx() can remove those spill/fill insns.
Quoted 26 lines
Add a
KF_NOCSRflag to mark kfuncs that follow nocsr contract.Signed-off-by Eduard Zingerman <[email protected]>--- include/linux/btf.h | 1 + kernel/bpf/verifier.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+)include/linux/btf.h +1
-0@@ -75,6 +75,7 @@#define KF_ITER_NEXT (1 << 9)/* kfunc implements BPF iter next method */ #define KF_ITER_DESTROY (1 << 10)/* kfunc implements BPF iter destructor */ #define KF_RCU_PROTECTED (1 << 11)/* kfunc should be protected by rcu cs when they are invoked */ +#define KF_NOCSR (1 << 12)/* kfunc follows nocsr calling contract */ /* * Tag marking a kernel function as a kfunc. This is meant to minimize the kernel/bpf/verifier.c +0
-0
kernel/bpf/verifier.c static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) · line 16147
Quoted 8 lines
kernel/bpf/verifier.c +5
-0@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } } +/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */ +static u32 kfunc_nocsr_clobber_mask (struct bpf_kfunc_call_arg_meta *meta) +{ +const struct btf_param *params; +u32 vlen, i, mask;
In helper_nocsr_clobber_mask, we have u8 mask. To be consistent, can we have 'u8 mask' here? Are you worried that the number of arguments could be more than 7? This seems not the case right now.
Quoted 26 lines
kernel/bpf/verifier.c +19
-0+ + params =btf_params (meta->func_proto); + vlen =btf_type_vlen (meta->func_proto); + mask =0 ; +if (!btf_type_is_void (btf_type_by_id (meta->btf, meta->func_proto->type))) + mask |=BIT (BPF_REG_0 ); +for (i =0 ; i < vlen; ++i) + mask |=BIT (BPF_REG_1 + i); +return mask; +} + +/* Same as verifier_inlines_helper_call() but for kfuncs, see comment above */ +static bool verifier_inlines_kfunc_call (struct bpf_kfunc_call_arg_meta *meta) +{ +return false; +} +/* GCC and LLVM define a no_caller_saved_registers function attribute. * This attribute means that function scratches only some of * the caller saved registers defined by ABI. @@ -16238,6 +16260,20 @@ static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, bpf_jit_inlines_helper_call(call->imm)); } +if (bpf_pseudo_kfunc_call (call)) { +struct bpf_kfunc_call_arg_meta meta;
kernel/bpf/verifier.c static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, · line 16274
Quoted 10 lines
kernel/bpf/verifier.c +10
-0+int err; + + err =fetch_kfunc_meta (env, call, &meta,NULL ); +if (err <0 ) +/* error would be reported later */ +return ; + + clobbered_regs_mask =kfunc_nocsr_clobber_mask (&meta); + can_be_inlined = (meta.kfunc_flags &KF_NOCSR ) && +verifier_inlines_kfunc_call (&meta);
I think we do not need both meta.kfunc_flags & KF_NOCSR and verifier_inlines_kfunc_call(&meta). Only one of them is enough since they test very similar thing. You do need to ensure kfuncs with KF_NOCSR in special_kfunc_list though. WDYT?
Quoted 5 lines
kernel/bpf/verifier.c +2
-0+ } +if (clobbered_regs_mask ==ALL_CALLER_SAVED_REGS )return ;
Eduard Zingerman
maintainerRe: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
On Mon, 2024-08-12 at 22:36 -0700, Yonghong Song wrote:
[...]
Quoted 4 lines
Quoted 4 lines
(quoted diff) +0
-0@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } }
Quoted 9 lines
kernel/bpf/verifier.c static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) · line 16147
Quoted 5 lines
kernel/bpf/verifier.c +5
-0+/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */ +static u32 kfunc_nocsr_clobber_mask (struct bpf_kfunc_call_arg_meta *meta) +{ +const struct btf_param *params; +u32 vlen, i, mask;In
helper_nocsr_clobber_mask, we have u8 mask. To be consistent, can we have 'u8 mask' here? Are you worried that the number of arguments could be more than 7? This seems not the case right now.
Before the nocsr part for helpers landed there was a change request to make helper_nocsr_clobber_mask() return u32. I modified the function but forgot to change the type for 'mask' local variable.
The main point in using u32 is uniformity.
I can either change kfunc_nocsr_clobber_mask() to use u8 for mask, or update helper_nocsr_clobber_mask() to use u32 for mask.
Quoted 35 lines
Quoted 35 lines
kernel/bpf/verifier.c +27
-0+ + params =btf_params (meta->func_proto); + vlen =btf_type_vlen (meta->func_proto); + mask =0 ; +if (!btf_type_is_void (btf_type_by_id (meta->btf, meta->func_proto->type))) + mask |=BIT (BPF_REG_0 ); +for (i =0 ; i < vlen; ++i) + mask |=BIT (BPF_REG_1 + i); +return mask; +} + +/* Same as verifier_inlines_helper_call() but for kfuncs, see comment above */ +static bool verifier_inlines_kfunc_call (struct bpf_kfunc_call_arg_meta *meta) +{ +return false; +} +/* GCC and LLVM define a no_caller_saved_registers function attribute. * This attribute means that function scratches only some of * the caller saved registers defined by ABI. @@ -16238,6 +16260,20 @@ static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, bpf_jit_inlines_helper_call(call->imm)); } +if (bpf_pseudo_kfunc_call (call)) { +struct bpf_kfunc_call_arg_meta meta; +int err; + + err =fetch_kfunc_meta (env, call, &meta,NULL ); +if (err <0 ) +/* error would be reported later */ +return ; + + clobbered_regs_mask =kfunc_nocsr_clobber_mask (&meta);
Quoted 8 lines
kernel/bpf/verifier.c static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, · line 16274
Quoted 2 lines
kernel/bpf/verifier.c +2
-0+ can_be_inlined = (meta.kfunc_flags &KF_NOCSR ) && +verifier_inlines_kfunc_call (&meta);I think we do not need both meta.kfunc_flags &
KF_NOCSRandverifier_inlines_kfunc_call(&meta). Only one of them is enough since they test very similar thing. You do need to ensure kfuncs withKF_NOCSRinspecial_kfunc_listthough. WDYT?
I can remove the flag in favour of verifier_inlines_kfunc_call().
Quoted 6 lines
Quoted 6 lines
kernel/bpf/verifier.c +2
-0+ } +if (clobbered_regs_mask ==ALL_CALLER_SAVED_REGS )return ;
Yonghong Song
reviewerRe: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
Quoted 16 lines · Eduard Zingerman
On Mon, 2024-08-12 at 22:36 -0700, Yonghong Song wrote:
[...]
Quoted 4 lines
Quoted 4 lines
(quoted diff) +0
-0@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } }Quoted 8 lines
kernel/bpf/verifier.c static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) · line 16147
Quoted 5 lines
kernel/bpf/verifier.c +5
-0+/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */ +static u32 kfunc_nocsr_clobber_mask (struct bpf_kfunc_call_arg_meta *meta) +{ +const struct btf_param *params; +u32 vlen, i, mask;In
helper_nocsr_clobber_mask, we have u8 mask. To be consistent, can we have 'u8 mask' here? Are you worried that the number of arguments could be more than 7? This seems not the case right now.
Quoted 7 lines
Before the nocsr part for helpers landed there was a change request to make
helper_nocsr_clobber_mask()return u32. I modified the function but forgot to change the type for 'mask' local variable.The main point in using u32 is uniformity.
I can either changekfunc_nocsr_clobber_mask()to use u8 for mask, or updatehelper_nocsr_clobber_mask()to use u32 for mask.
Changing to u32 in helper_nocsr_clobber_mask() is okay. I just want to have consistent type for 'mask' in both functions.
Quoted 42 lines
Quoted 34 lines
Quoted 34 lines
kernel/bpf/verifier.c +26
-0+ + params =btf_params (meta->func_proto); + vlen =btf_type_vlen (meta->func_proto); + mask =0 ; +if (!btf_type_is_void (btf_type_by_id (meta->btf, meta->func_proto->type))) + mask |=BIT (BPF_REG_0 ); +for (i =0 ; i < vlen; ++i) + mask |=BIT (BPF_REG_1 + i); +return mask; +} + +/* Same as verifier_inlines_helper_call() but for kfuncs, see comment above */ +static bool verifier_inlines_kfunc_call (struct bpf_kfunc_call_arg_meta *meta) +{ +return false; +} +/* GCC and LLVM define a no_caller_saved_registers function attribute. * This attribute means that function scratches only some of * the caller saved registers defined by ABI. @@ -16238,6 +16260,20 @@ static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, bpf_jit_inlines_helper_call(call->imm)); } +if (bpf_pseudo_kfunc_call (call)) { +struct bpf_kfunc_call_arg_meta meta; +int err; + + err =fetch_kfunc_meta (env, call, &meta,NULL ); +if (err <0 ) +/* error would be reported later */ +return ; +Quoted 8 lines
kernel/bpf/verifier.c static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, · line 16274
Quoted 3 lines
kernel/bpf/verifier.c +3
-0+ clobbered_regs_mask =kfunc_nocsr_clobber_mask (&meta); + can_be_inlined = (meta.kfunc_flags &KF_NOCSR ) && +verifier_inlines_kfunc_call (&meta);I think we do not need both meta.kfunc_flags &
KF_NOCSRandverifier_inlines_kfunc_call(&meta). Only one of them is enough since they test very similar thing. You do need to ensure kfuncs withKF_NOCSRinspecial_kfunc_listthough. WDYT?
Quoted 1 line
I can remove the flag in favour of
verifier_inlines_kfunc_call().
Sounds good to me.
Quoted 7 lines
Quoted 6 lines
Quoted 6 lines
kernel/bpf/verifier.c +2
-0+ } +if (clobbered_regs_mask ==ALL_CALLER_SAVED_REGS )return ;
Eduard Zingerman
maintainerRe: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
On Tue, 2024-08-13 at 08:18 -0700, Yonghong Song wrote:
[...]
Quoted 21 lines
Quoted 21 lines
Quoted 21 lines
Quoted 6 lines
kernel/bpf/verifier.c +2
-0@@ -16238,6 +16260,20 @@ static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, bpf_jit_inlines_helper_call(call->imm)); } +if (bpf_pseudo_kfunc_call (call)) { +struct bpf_kfunc_call_arg_meta meta;kernel/bpf/verifier.c static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, · line 16274
Quoted 10 lines
kernel/bpf/verifier.c +10
-0+int err; + + err =fetch_kfunc_meta (env, call, &meta,NULL ); +if (err <0 ) +/* error would be reported later */ +return ; + + clobbered_regs_mask =kfunc_nocsr_clobber_mask (&meta); + can_be_inlined = (meta.kfunc_flags &KF_NOCSR ) && +verifier_inlines_kfunc_call (&meta);I think we do not need both meta.kfunc_flags &
KF_NOCSRandverifier_inlines_kfunc_call(&meta). Only one of them is enough since they test very similar thing. You do need to ensure kfuncs withKF_NOCSRinspecial_kfunc_listthough. WDYT?
Quoted 3 lines
Quoted 1 line
I can remove the flag in favour of
verifier_inlines_kfunc_call().Sounds good to me.
Just one more point. The reason I added the KF_NOCSR was to keep the code as close to helpers case as possible. For helpers there are two guards:
- verifier_inlines_helper_call() function shared between mark_nocsr_pattern_for_call() and do_misc_fixups();
- bpf_func_proto->allow_nocsr flag.
The idea is that verifier might inline some functions w/o allowing nocsr. Hence I decided to use KF_NOCSR in place of bpf_func_proto->allow_nocsr. On the other hand, verifier_inlines_kfunc_call() is not used by any other function except mark_nocsr_pattern_for_call() at the moment, so the KF_NOCSR flag might be redundant indeed.
Re: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
In reply to Eduard ZingermanQuoted 49 lines · Eduard Zingerman
Recognize nocsr patterns around kfunc calls.
For example, supposebpf_cast_to_kern_ctx()follows nocsr contract (which it does, it is rewritten by verifier as "r0 = r1" insn), in such a case, rewrite BPF program below:r2 = 1; *(u64 *)(r10 - 32) = r2; call %[bpf_cast_to_kern_ctx]; r2 = *(u64 *)(r10 - 32); r0 = r2;Removing the spill/fill pair:
r2 = 1; call %[bpf_cast_to_kern_ctx]; r0 = r2;Add a
KF_NOCSRflag to mark kfuncs that follow nocsr contract.Signed-off-by Eduard Zingerman <[email protected]>--- include/linux/btf.h | 1 + kernel/bpf/verifier.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+)include/linux/btf.h +1
-0@@ -75,6 +75,7 @@#define KF_ITER_NEXT (1 << 9)/* kfunc implements BPF iter next method */ #define KF_ITER_DESTROY (1 << 10)/* kfunc implements BPF iter destructor */ #define KF_RCU_PROTECTED (1 << 11)/* kfunc should be protected by rcu cs when they are invoked */ +#define KF_NOCSR (1 << 12)/* kfunc follows nocsr calling contract */ /* * Tag marking a kernel function as a kfunc. This is meant to minimize the kernel/bpf/verifier.c +3
-0@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } } +/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */ +static u32 kfunc_nocsr_clobber_mask (struct bpf_kfunc_call_arg_meta *meta) +{
kernel/bpf/verifier.c static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) · line 16155
Quoted 10 lines
kernel/bpf/verifier.c +10
-0+const struct btf_param *params; +u32 vlen, i, mask; + + params =btf_params (meta->func_proto); + vlen =btf_type_vlen (meta->func_proto); + mask =0 ; +if (!btf_type_is_void (btf_type_by_id (meta->btf, meta->func_proto->type))) + mask |=BIT (BPF_REG_0 ); +for (i =0 ; i < vlen; ++i) + mask |=BIT (BPF_REG_1 + i);
Somewhere deep in btf_dump implementation of libbpf, there is a special handling of <whatever> func(void) (no args) function as having vlen == 1 and type being VOID (i.e., zero). I don't know if that still can happen, but I believe at some point we could get this vlen==1 and type=VOID for no-args functions. So I wonder if we should handle that here as well, or is it some compiler atavism we can forget about?
Quoted 36 lines
kernel/bpf/verifier.c +23
-1+return mask; +} + +/* Same as verifier_inlines_helper_call() but for kfuncs, see comment above */ +static bool verifier_inlines_kfunc_call (struct bpf_kfunc_call_arg_meta *meta) +{ +return false; +} +/* GCC and LLVM define a no_caller_saved_registers function attribute. * This attribute means that function scratches only some of * the caller saved registers defined by ABI. @@ -16238,6 +16260,20 @@ static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, bpf_jit_inlines_helper_call(call->imm)); } +if (bpf_pseudo_kfunc_call (call)) { +struct bpf_kfunc_call_arg_meta meta; +int err; + + err =fetch_kfunc_meta (env, call, &meta,NULL ); +if (err <0 ) +/* error would be reported later */ +return ; + + clobbered_regs_mask =kfunc_nocsr_clobber_mask (&meta); + can_be_inlined = (meta.kfunc_flags &KF_NOCSR ) && +verifier_inlines_kfunc_call (&meta); + } +if (clobbered_regs_mask ==ALL_CALLER_SAVED_REGS )return ; --2.45.2
Eduard Zingerman
maintainerRe: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
On Thu, 2024-08-15 at 14:24 -0700, Andrii Nakryiko wrote:
[...]
Quoted 18 lines
Quoted 7 lines
kernel/bpf/verifier.c +3
-0@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } } +/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */ +static u32 kfunc_nocsr_clobber_mask (struct bpf_kfunc_call_arg_meta *meta) +{kernel/bpf/verifier.c static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) · line 16155
Quoted 10 lines
kernel/bpf/verifier.c +10
-0+const struct btf_param *params; +u32 vlen, i, mask; + + params =btf_params (meta->func_proto); + vlen =btf_type_vlen (meta->func_proto); + mask =0 ; +if (!btf_type_is_void (btf_type_by_id (meta->btf, meta->func_proto->type))) + mask |=BIT (BPF_REG_0 ); +for (i =0 ; i < vlen; ++i) + mask |=BIT (BPF_REG_1 + i);
Quoted 8 lines
Somewhere deep in
btf_dumpimplementation of libbpf, there is a special handling of<whatever> func(void)(no args) function as having vlen == 1 and type being VOID (i.e., zero). I don't know if that still can happen, but I believe at some point we could get this vlen==1 and type=VOID for no-args functions. So I wonder if we should handle that here as well, or is it some compiler atavism we can forget about?
I just checked BTF generated for 'int filelock_init(void)',
for gcc compiled kernel using latest pahole and func proto looks as follows:
FUNC_PROTO '(anon)' ret_type_id=12 vlen=0
So I assume this is an atavism.
[...]
Yonghong Song
reviewerRe: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
Quoted 29 lines · Eduard Zingerman
On Thu, 2024-08-15 at 14:24 -0700, Andrii Nakryiko wrote:
[...]
Quoted 16 lines
Quoted 16 lines
kernel/bpf/verifier.c +12
-0@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } } +/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */ +static u32 kfunc_nocsr_clobber_mask (struct bpf_kfunc_call_arg_meta *meta) +{ +const struct btf_param *params; +u32 vlen, i, mask; + + params =btf_params (meta->func_proto); + vlen =btf_type_vlen (meta->func_proto); + mask =0 ; +if (!btf_type_is_void (btf_type_by_id (meta->btf, meta->func_proto->type))) + mask |=BIT (BPF_REG_0 ); +for (i =0 ; i < vlen; ++i)Quoted 9 lines
kernel/bpf/verifier.c static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) · line 16155
Quoted 1 line
kernel/bpf/verifier.c +1
-0+ mask |=BIT (BPF_REG_1 + i);Somewhere deep in
btf_dumpimplementation of libbpf, there is a special handling of<whatever> func(void)(no args) function as having vlen == 1 and type being VOID (i.e., zero). I don't know if that still can happen, but I believe at some point we could get this vlen==1 and type=VOID for no-args functions. So I wonder if we should handle that here as well, or is it some compiler atavism we can forget about?
Quoted 6 lines
I just checked BTF generated for 'int
filelock_init(void)',
for gcc compiled kernel using latest pahole and func proto looks as follows:FUNC_PROTO '(anon)' ret_type_id=12 vlen=0So I assume this is an atavism.
Agree, for kernel vmlinux BTF, we should be fine.
Quoted 4 lines
[...]
Eduard Zingerman
maintainerRe: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
Quoted 30 lines · Yonghong Song
Quoted 29 lines · Eduard Zingerman
On Thu, 2024-08-15 at 14:24 -0700, Andrii Nakryiko wrote:
[...]
Quoted 25 lines
Quoted 7 lines
kernel/bpf/verifier.c +3
-0@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } } +/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */ +static u32 kfunc_nocsr_clobber_mask (struct bpf_kfunc_call_arg_meta *meta) +{kernel/bpf/verifier.c static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) · line 16155
Quoted 10 lines
kernel/bpf/verifier.c +10
-0+const struct btf_param *params; +u32 vlen, i, mask; + + params =btf_params (meta->func_proto); + vlen =btf_type_vlen (meta->func_proto); + mask =0 ; +if (!btf_type_is_void (btf_type_by_id (meta->btf, meta->func_proto->type))) + mask |=BIT (BPF_REG_0 ); +for (i =0 ; i < vlen; ++i) + mask |=BIT (BPF_REG_1 + i);Somewhere deep in
btf_dumpimplementation of libbpf, there is a special handling of<whatever> func(void)(no args) function as having vlen == 1 and type being VOID (i.e., zero). I don't know if that still can happen, but I believe at some point we could get this vlen==1 and type=VOID for no-args functions. So I wonder if we should handle that here as well, or is it some compiler atavism we can forget about?
Quoted 8 lines
Quoted 6 lines
I just checked BTF generated for 'int
filelock_init(void)',
for gcc compiled kernel using latest pahole and func proto looks as follows:FUNC_PROTO '(anon)' ret_type_id=12 vlen=0So I assume this is an atavism.
Agree, for kernel vmlinux BTF, we should be fine.
Right, since we are dealing only with vmlinux BTF special case is not needed. Please let me know if I misunderstand you or Andrii.
Yonghong Song
reviewerRe: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
In reply to Andrii NakryikoQuoted 58 lines · Andrii Nakryiko
Quoted 57 lines · Eduard Zingerman
Recognize nocsr patterns around kfunc calls.
For example, supposebpf_cast_to_kern_ctx()follows nocsr contract (which it does, it is rewritten by verifier as "r0 = r1" insn), in such a case, rewrite BPF program below:r2 = 1; *(u64 *)(r10 - 32) = r2; call %[bpf_cast_to_kern_ctx]; r2 = *(u64 *)(r10 - 32); r0 = r2;Removing the spill/fill pair:
r2 = 1; call %[bpf_cast_to_kern_ctx]; r0 = r2;Add a
KF_NOCSRflag to mark kfuncs that follow nocsr contract.Signed-off-by Eduard Zingerman <[email protected]>--- include/linux/btf.h | 1 + kernel/bpf/verifier.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+)include/linux/btf.h +1
-0@@ -75,6 +75,7 @@#define KF_ITER_NEXT (1 << 9)/* kfunc implements BPF iter next method */ #define KF_ITER_DESTROY (1 << 10)/* kfunc implements BPF iter destructor */ #define KF_RCU_PROTECTED (1 << 11)/* kfunc should be protected by rcu cs when they are invoked */ +#define KF_NOCSR (1 << 12)/* kfunc follows nocsr calling contract */ /* * Tag marking a kernel function as a kfunc. This is meant to minimize the kernel/bpf/verifier.c +12
-0@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } } +/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */ +static u32 kfunc_nocsr_clobber_mask (struct bpf_kfunc_call_arg_meta *meta) +{ +const struct btf_param *params; +u32 vlen, i, mask; + + params =btf_params (meta->func_proto); + vlen =btf_type_vlen (meta->func_proto); + mask =0 ; +if (!btf_type_is_void (btf_type_by_id (meta->btf, meta->func_proto->type))) + mask |=BIT (BPF_REG_0 ); +for (i =0 ; i < vlen; ++i)
Quoted 8 lines
kernel/bpf/verifier.c static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) · line 16155
Quoted 1 line
kernel/bpf/verifier.c +1
-0+ mask |=BIT (BPF_REG_1 + i);Somewhere deep in
btf_dumpimplementation of libbpf, there is a special handling of<whatever> func(void)(no args) function as having vlen == 1 and type being VOID (i.e., zero). I don't know if that still can happen, but I believe at some point we could get this vlen==1 and type=VOID for no-args functions. So I wonder if we should handle that here as well, or is it some compiler atavism we can forget about?
The case to have vlen=1 and type=VOID only happens for bpf programs with llvm19 and later.
For example,
$ cat t.c
int foo(); // a kfunc or a helper
int bar() {
return foo(1, 2);
}$ clang --target=bpf -O2 -g -c t.c && llvm-dwarfdump t.o
t.c:3:13: warning: passing arguments to 'foo' without a prototype is deprecated in all versions of C and is not supported in C23 [-Wdeprecated-non-prototype]
3 | return foo(1, 2);
| ^
1 warning generated.
t.o: file format elf64-bpf
...
0x00000039: DW_TAG_subprogram
DW_AT_name ("foo")
DW_AT_decl_file ("/home/yhs/t.c")
DW_AT_decl_line (1)
DW_AT_type (0x00000043 "int")
DW_AT_declaration (true)
DW_AT_external (true)0x00000041: DW_TAG_unspecified_parameters
0x00000042: NULL
...
If we do see a BPF kfunc/helper with vlen=1 and type is VOID, that means the number of arguments is actual UNKNOWN based on dwarf DW_TAG_subprogram tag. Although it is unlikely people to write code like above, it might be still useful to add check with vlen=1 and type=VOID and reject such a case.
Quoted 37 lines
Quoted 37 lines
kernel/bpf/verifier.c +23
-1+return mask; +} + +/* Same as verifier_inlines_helper_call() but for kfuncs, see comment above */ +static bool verifier_inlines_kfunc_call (struct bpf_kfunc_call_arg_meta *meta) +{ +return false; +} +/* GCC and LLVM define a no_caller_saved_registers function attribute. * This attribute means that function scratches only some of * the caller saved registers defined by ABI. @@ -16238,6 +16260,20 @@ static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, bpf_jit_inlines_helper_call(call->imm)); } +if (bpf_pseudo_kfunc_call (call)) { +struct bpf_kfunc_call_arg_meta meta; +int err; + + err =fetch_kfunc_meta (env, call, &meta,NULL ); +if (err <0 ) +/* error would be reported later */ +return ; + + clobbered_regs_mask =kfunc_nocsr_clobber_mask (&meta); + can_be_inlined = (meta.kfunc_flags &KF_NOCSR ) && +verifier_inlines_kfunc_call (&meta); + } +if (clobbered_regs_mask ==ALL_CALLER_SAVED_REGS )return ; --2.45.2
Yonghong Song
reviewerRe: [PATCH bpf-next 1/3] bpf: support nocsr patterns for calls to kfuncs
Quoted 101 lines · Yonghong Song
Quoted 63 lines · Andrii Nakryiko
Quoted 62 lines · Eduard Zingerman
Recognize nocsr patterns around kfunc calls.
For example, supposebpf_cast_to_kern_ctx()follows nocsr contract (which it does, it is rewritten by verifier as "r0 = r1" insn), in such a case, rewrite BPF program below:r2 = 1;
*(u64 *)(r10 - 32) = r2;
call %[bpf_cast_to_kern_ctx];
r2 = *(u64 *)(r10 - 32);
r0 = r2;Removing the spill/fill pair:
r2 = 1;
call %[bpf_cast_to_kern_ctx];
r0 = r2;Add a
KF_NOCSRflag to mark kfuncs that follow nocsr contract.Signed-off-by Eduard Zingerman <[email protected]>---
include/linux/btf.h | 1 +
kernel/bpf/verifier.c| 36 ++++++++++++++++++++++++++++++++++++2 files changed, 37 insertions(+)include/linux/btf.h +1
-0@@ -75,6 +75,7 @@ #define KF_ITER_NEXT (1 << 9) /* kfunc implements BPF iter next method */ #define KF_ITER_DESTROY (1 << 10) /* kfunc implements BPF iter destructor */ #define KF_RCU_PROTECTED (1 << 11) /* kfunc should be protected by rcu cs when they are invoked */ +#define KF_NOCSR (1 << 12)/* kfunc follows nocsr calling contract */
/*
* Tag marking a kernel function as a kfunc. This is meant to minimize thekernel/bpf/verifier.c +1
-0@@ -16140,6 +16140,28 @@ static bool verifier_inlines_helper_call(struct bpf_verifier_env *env, s32 imm) } } +/* Same as helper_nocsr_clobber_mask() but for kfuncs, see comment above */
+static u32kfunc_nocsr_clobber_mask(struct bpf_kfunc_call_arg_meta *meta)kernel/bpf/verifier.c +8
-0+{ + const struct btf_param *params; + u32 vlen, i, mask; + + params = btf_params(meta->func_proto); + vlen = btf_type_vlen(meta->func_proto); + mask = 0; + if (!btf_type_is_void(btf_type_by_id(meta->btf,
meta->func_proto->type)))
+ mask |=BIT(BPF_REG_0);
+ for (i = 0; i < vlen; ++i)Quoted 8 lines
Quoted 1 line
+ mask |=
BIT(BPF_REG_1 + i);Somewhere deep in
btf_dumpimplementation of libbpf, there is a special handling of<whatever> func(void)(no args) function as having vlen == 1 and type being VOID (i.e., zero). I don't know if that still can happen, but I believe at some point we could get this vlen==1 and type=VOID for no-args functions. So I wonder if we should handle that here as well, or is it some compiler atavism we can forget about?The case to have vlen=1 and type=VOID only happens for bpf programs with llvm19 and later.
For example,$ cat t.c int foo(); // a kfunc or a helper int bar() { return foo(1, 2); }$ clang --target=bpf -O2 -g -c t.c && llvm-dwarfdump t.o t.c:3:13: warning: passing arguments to 'foo' without a prototype is deprecated in all versions of C and is not supported in C23 [-Wdeprecated-non-prototype] 3 | return foo(1, 2); | ^ 1 warning generated. t.o: file format elf64-bpf ... 0x00000039: DW_TAG_subprogram DW_AT_name ("foo") DW_AT_decl_file ("/home/yhs/t.c") DW_AT_decl_line (1) DW_AT_type (0x00000043 "int") DW_AT_declaration (true) DW_AT_external (true)0x00000041:
DW_TAG_unspecified_parameters
Quoted 8 lines
0x00000042: NULL
...If we do see a BPF kfunc/helper with vlen=1 and type is VOID, that means the number of arguments is actual UNKNOWN based on dwarf
DW_TAG_subprogramtag. Although it is unlikely people to write code like above, it might be still useful to add check with vlen=1 and type=VOID and reject such a case.
For vmlinux BTF, this is not possible since eventually all function has a definition which will define the function precisely w.r.t. the number of arguments and their types.
Quoted 42 lines
Quoted 42 lines
Quoted 42 lines
+ return mask;
kernel/bpf/verifier.c +3
-0+} + +/* Same as verifier_inlines_helper_call() but for kfuncs, see comment above */
+static bool verifier_inlines_kfunc_call(structbpf_kfunc_call_arg_meta*meta)kernel/bpf/verifier.c +4
-0+{ + return false; +} +/* GCC and LLVM define a
no_caller_saved_registersfunction attribute.
* This attribute means that function scratches only some of
* the caller saved registers defined by ABI.kernel/bpf/verifier.c +14
-0@@ -16238,6 +16260,20 @@ static void mark_nocsr_pattern_for_call(struct bpf_verifier_env *env, bpf_jit_inlines_helper_call(call->imm)); } + if (bpf_pseudo_kfunc_call(call)) { + struct bpf_kfunc_call_arg_meta meta; + int err; + + err = fetch_kfunc_meta(env, call, &meta, NULL); + if (err < 0) + /* error would be reported later */ + return; + + clobbered_regs_mask = kfunc_nocsr_clobber_mask(&meta); + can_be_inlined = (meta.kfunc_flags & KF_NOCSR) && +verifier_inlines_kfunc_call (&meta); + } + if (clobbered_regs_mask == ALL_CALLER_SAVED_REGS) return;Signature · 2 lines
-- 2.45.2
Eduard Zingerman
maintainerPATCH 2/3 bpf: mark bpf_cast_to_kern_ctx and bpf_rdonly_cast as KF_NOCSR
In reply to Eduard Zingermando_misc_fixups() relaces bpf_cast_to_kern_ctx() and bpf_rdonly_cast() by a single instruction "r0 = r1". This clearly follows nocsr contract. Mark these two functions as KF_NOCSR, in order to use them in selftests checking KF_NOCSR behaviour for kfuncs.
--- kernel/bpf/helpers.c | 4 ++-- kernel/bpf/verifier.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-)
kernel/bpf/helpers.c +2 -2
@@ -2987,8 +2987,8 @@ BTF_ID(func, bpf_cgroup_release_dtor)#endif BTF_KFUNCS_START(common_btf_ids) -BTF_ID_FLAGS(func, bpf_cast_to_kern_ctx) -BTF_ID_FLAGS(func, bpf_rdonly_cast) +BTF_ID_FLAGS(func, bpf_cast_to_kern_ctx, KF_NOCSR) +BTF_ID_FLAGS(func, bpf_rdonly_cast, KF_NOCSR) BTF_ID_FLAGS(func, bpf_rcu_read_lock) BTF_ID_FLAGS(func, bpf_rcu_read_unlock) BTF_ID_FLAGS(func, bpf_dynptr_slice, KF_RET_NULL)
kernel/bpf/verifier.c +2 -1
@@ -16159,7 +16159,8 @@ static u32 kfunc_nocsr_clobber_mask(struct bpf_kfunc_call_arg_meta *meta)/* Same as verifier_inlines_helper_call() but for kfuncs, see comment above */ static bool verifier_inlines_kfunc_call (struct bpf_kfunc_call_arg_meta *meta) { -return false; +return meta->func_id == special_kfunc_list[KF_bpf_cast_to_kern_ctx] || + meta->func_id == special_kfunc_list[KF_bpf_rdonly_cast]; }/* GCC and LLVM define a no_caller_saved_registers function attribute.
Signature · 1 line
2.45.2
Re: [PATCH bpf-next 2/3] bpf: mark bpf_cast_to_kern_ctx and bpf_rdonly_cast as KF_NOCSR
Quoted 11 lines · Eduard Zingerman
do_misc_fixups()relacesbpf_cast_to_kern_ctx()andbpf_rdonly_cast()by a single instruction "r0 = r1". This clearly follows nocsr contract. Mark these two functions asKF_NOCSR, in order to use them in selftests checkingKF_NOCSRbehaviour for kfuncs.Signed-off-by Eduard Zingerman <[email protected]>--- kernel/bpf/helpers.c | 4 ++-- kernel/bpf/verifier.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-)
Isn't it now "bpf fastcall" and not "nocsr"? Shouldn't the flag and verifier code reflect this updated terminology?
Quoted 33 lines
kernel/bpf/helpers.c +2
-2@@ -2987,8 +2987,8 @@ BTF_ID(func, bpf_cgroup_release_dtor)#endif BTF_KFUNCS_START(common_btf_ids) -BTF_ID_FLAGS(func, bpf_cast_to_kern_ctx) -BTF_ID_FLAGS(func, bpf_rdonly_cast) +BTF_ID_FLAGS(func, bpf_cast_to_kern_ctx, KF_NOCSR) +BTF_ID_FLAGS(func, bpf_rdonly_cast, KF_NOCSR) BTF_ID_FLAGS(func, bpf_rcu_read_lock) BTF_ID_FLAGS(func, bpf_rcu_read_unlock) BTF_ID_FLAGS(func, bpf_dynptr_slice, KF_RET_NULL)kernel/bpf/verifier.c +2
-2@@ -16159,7 +16159,8 @@ static u32 kfunc_nocsr_clobber_mask(struct bpf_kfunc_call_arg_meta *meta)/* Same as verifier_inlines_helper_call() but for kfuncs, see comment above */ static bool verifier_inlines_kfunc_call (struct bpf_kfunc_call_arg_meta *meta) { -return false; +return meta->func_id == special_kfunc_list[KF_bpf_cast_to_kern_ctx] || + meta->func_id == special_kfunc_list[KF_bpf_rdonly_cast]; }/* GCC and LLVM define a no_caller_saved_registers function attribute. -- 2.45.2
Eduard Zingerman
maintainerRe: [PATCH bpf-next 2/3] bpf: mark bpf_cast_to_kern_ctx and bpf_rdonly_cast as KF_NOCSR
Quoted 7 lines · Andrii Nakryiko
Quoted 6 lines · Eduard Zingerman
do_misc_fixups()relacesbpf_cast_to_kern_ctx()andbpf_rdonly_cast()by a single instruction "r0 = r1". This clearly follows nocsr contract. Mark these two functions asKF_NOCSR, in order to use them in selftests checkingKF_NOCSRbehaviour for kfuncs.
Quoted 8 lines
Quoted 5 lines
Signed-off-by Eduard Zingerman <[email protected]>--- kernel/bpf/helpers.c | 4 ++-- kernel/bpf/verifier.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-)Isn't it now "bpf fastcall" and not "nocsr"? Shouldn't the flag and verifier code reflect this updated terminology?
Here is a pull request for LLVM that lands the feature under the new bpf_fastcall name: https://github.com/llvm/llvm-project/pull/101228
I hope that it would be approved today or tomorrow (more like tomorrow).
Kernel side uses NOCSR in all places.
I can add a first patch to the series, renaming all NOCSR to bpf_fastcall, now that it looks like llvm upstream won't object the name.
[...]
Re: [PATCH bpf-next 2/3] bpf: mark bpf_cast_to_kern_ctx and bpf_rdonly_cast as KF_NOCSR
Quoted 18 lines · Eduard Zingerman
Quoted 7 lines · Andrii Nakryiko
Quoted 6 lines · Eduard Zingerman
do_misc_fixups()relacesbpf_cast_to_kern_ctx()andbpf_rdonly_cast()by a single instruction "r0 = r1". This clearly follows nocsr contract. Mark these two functions asKF_NOCSR, in order to use them in selftests checkingKF_NOCSRbehaviour for kfuncs.Quoted 8 lines
Quoted 5 lines
Signed-off-by Eduard Zingerman <[email protected]>--- kernel/bpf/helpers.c | 4 ++-- kernel/bpf/verifier.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-)Isn't it now "bpf fastcall" and not "nocsr"? Shouldn't the flag and verifier code reflect this updated terminology?
Quoted 7 lines
Here is a pull request for LLVM that lands the feature under the new
bpf_fastcallname: https://github.com/llvm/llvm-project/pull/101228
I hope that it would be approved today or tomorrow (more like tomorrow).Kernel side uses NOCSR in all places.
I can add a first patch to the series, renaming all NOCSR tobpf_fastcall, now that it looks like llvm upstream won't object the name.
Yep, I'd do that. Let's keep terminology consistent throughout.
I assume you'll also eventually follow up with bpf_helpers_defs.h (there is a script that generates it) change to add that bpf_fastcall attribute for select helpers, right?
Quoted 3 lines
[...]
Eduard Zingerman
maintainerRe: [PATCH bpf-next 2/3] bpf: mark bpf_cast_to_kern_ctx and bpf_rdonly_cast as KF_NOCSR
On Thu, 2024-08-15 at 15:12 -0700, Andrii Nakryiko wrote:
[...]
Quoted 9 lines
Quoted 7 lines
Here is a pull request for LLVM that lands the feature under the new
bpf_fastcallname: https://github.com/llvm/llvm-project/pull/101228
I hope that it would be approved today or tomorrow (more like tomorrow).Kernel side uses NOCSR in all places.
I can add a first patch to the series, renaming all NOCSR tobpf_fastcall, now that it looks like llvm upstream won't object the name.Yep, I'd do that. Let's keep terminology consistent throughout.
Ok, will do, thank you.
Quoted 3 lines
I assume you'll also eventually follow up with
bpf_helpers_defs.h(there is a script that generates it) change to add thatbpf_fastcallattribute for select helpers, right?
Good point.
Eduard Zingerman
maintainerPATCH 3/3 selftests/bpf: check if nocsr pattern is recognized for kfuncs
In reply to Eduard ZingermanUse kfunc_bpf_cast_to_kern_ctx() and kfunc_bpf_rdonly_cast() to verify that nocsr pattern is recognized for kfunc calls.
--- .../selftests/bpf/progs/verifier_nocsr.c | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+)
tools/testing/selftests/bpf/progs/verifier_nocsr.c +50 -0
@@ -2,8 +2,11 @@#include <linux/bpf.h> #include <bpf/bpf_helpers.h> +#include <bpf/bpf_core_read.h> #include "../../../include/linux/filter.h" #include "bpf_misc.h" +#include <stdbool.h> +#include "bpf_kfuncs.h" SEC("raw_tp") __arch_x86_64
@@ -793,4 +796,51 @@ __naked int nocsr_max_stack_fail(void) ); } +SEC("cgroup/getsockname_unix") +__xlated ("0: r2 = 1" ) +/* bpf_cast_to_kern_ctx is replaced by a single assignment */ +__xlated("1: r0 = r1") +__xlated("2: r0 = r2") +__xlated("3: exit") +__success +__naked void kfunc_bpf_cast_to_kern_ctx (void ) +{ + asmvolatile ( +"r2 = 1;" +"*(u64 *)(r10 - 32) = r2;" +"call %[bpf_cast_to_kern_ctx];" +"r2 = *(u64 *)(r10 - 32);" +"r0 = r2;" +"exit;" + : + : __imm(bpf_cast_to_kern_ctx) + : __clobber_all); +} + +SEC("raw_tp") +__xlated ("3: r3 = 1" ) +/* bpf_rdonly_cast is replaced by a single assignment */ +__xlated("4: r0 = r1") +__xlated("5: r0 = r3") +void kfunc_bpf_rdonly_cast (void ) +{ + asmvolatile ( +"r2 = %[btf_id];" +"r3 = 1;" +"*(u64 *)(r10 - 32) = r3;" +"call %[bpf_rdonly_cast];" +"r3 = *(u64 *)(r10 - 32);" +"r0 = r3;" + : + : __imm(bpf_rdonly_cast), + [btf_id]"r"(bpf_core_type_id_kernel(union bpf_attr)) + : __clobber_common); +} + +void kfunc_root (void ) +{ +bpf_cast_to_kern_ctx (0 ); +bpf_rdonly_cast (0 ,0 ); +} + char _license[] SEC("license") = "GPL";
Signature · 1 line
2.45.2