cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
PATCH 1/1 cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
From: Issam Hamdi <[email protected]>
When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24
--- net/wireless/nl80211.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
net/wireless/nl80211.c +15 -1
@@ -10143,7 +10143,21 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, err =rdev_start_radar_detection (rdev, dev, &chandef, cac_time_ms);if (!err) { - wdev->links[0 ].ap.chandef = chandef; +switch (wdev->iftype) { +case NL80211_IFTYPE_MESH_POINT : + wdev->u.mesh.chandef = chandef; +break ; +case NL80211_IFTYPE_ADHOC : + wdev->u.ibss.chandef = chandef; +break ; +case NL80211_IFTYPE_OCB : + wdev->u.ocb.chandef = chandef; +break ; +case NL80211_IFTYPE_AP : +case NL80211_IFTYPE_P2P_GO : + wdev->links[0 ].ap.chandef = chandef; +break ; + } wdev->cac_started = true; wdev->cac_start_time = jiffies; wdev->cac_time_ms = cac_time_ms;
Signature · 1 line
2.39.2
kernel test robot
build botkernel test robot noticed the following build warnings:
Hi root,
kernel test robot noticed the following build warnings:
[auto build test WARNING on wireless-next/main]
[also build test WARNING on wireless/main linus/master v6.11-rc3 next-20240812] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/root/cfg80211-Set-the-channel-definition-for-the-different-Wi-Fi-modes-when-starting-CAC/20240812-202257 base: https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git main patch link: https://lore.kernel.org/r/20240812120909.2721400-1-root%40hissam.office.simonwunderlich.net patch subject: [PATCH] cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC config: arm-u8500_defconfig (https://download.01.org/0day-ci/archive/20240813/[email protected]/config) compiler: arm-linux-gnueabi-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240813/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>):
net/wireless/nl80211.c: In function 'nl80211_start_radar_detection':
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NL80211_IFTYPE_UNSPECIFIED' not handled in switch [-Wswitch]
10146 | switch (wdev->iftype) {
| ^~~~~~
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NL80211_IFTYPE_STATION' not handled in switch [-Wswitch]
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NL80211_IFTYPE_AP_VLAN' not handled in switch [-Wswitch]
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NL80211_IFTYPE_WDS' not handled in switch [-Wswitch]
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NL80211_IFTYPE_MONITOR' not handled in switch [-Wswitch]
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NL80211_IFTYPE_P2P_CLIENT' not handled in switch [-Wswitch]
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NL80211_IFTYPE_P2P_DEVICE' not handled in switch [-Wswitch]
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NL80211_IFTYPE_NAN' not handled in switch [-Wswitch]
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NUM_NL80211_IFTYPES' not handled in switch [-Wswitch]
>> net/wireless/nl80211.c:10146:17: warning: enumeration value 'NL80211_IFTYPE_MAX' not handled in switch [-Wswitch]vim +/NL80211_IFTYPE_UNSPECIFIED +10146 net/wireless/nl80211.c
10068
10069 static int nl80211_start_radar_detection(struct sk_buff *skb,
10070 struct genl_info *info)
10071 {
10072 struct cfg80211_registered_device *rdev = info->user_ptr[0];
10073 struct net_device *dev = info->user_ptr[1];
10074 struct wireless_dev *wdev = dev->ieee80211_ptr;
10075 struct wiphy *wiphy = wdev->wiphy;
10076 struct cfg80211_chan_def chandef;
10077 enum nl80211_dfs_regions dfs_region;
10078 unsigned int cac_time_ms;
10079 int err = -EINVAL;
10080
10081 flush_delayed_work(&rdev->dfs_update_channels_wk);
10082
10083 switch (wdev->iftype) {
10084 case NL80211_IFTYPE_AP:
10085 case NL80211_IFTYPE_P2P_GO:
10086 case NL80211_IFTYPE_MESH_POINT:
10087 case NL80211_IFTYPE_ADHOC:
10088 break;
10089 default:
10090 /* caution - see cfg80211_beaconing_iface_active() below */
10091 return -EINVAL;
10092 }
10093
10094 wiphy_lock(wiphy);
10095
10096 dfs_region = reg_get_dfs_region(wiphy);
10097 if (dfs_region == NL80211_DFS_UNSET)
10098 goto unlock;
10099
10100 err = nl80211_parse_chandef(rdev, info, &chandef);
10101 if (err)
10102 goto unlock;
10103
10104 err = cfg80211_chandef_dfs_required(wiphy, &chandef, wdev->iftype);
10105 if (err < 0)
10106 goto unlock;
10107
10108 if (err == 0) {
10109 err = -EINVAL;
10110 goto unlock;
10111 }
10112
10113 if (!cfg80211_chandef_dfs_usable(wiphy, &chandef)) {
10114 err = -EINVAL;
10115 goto unlock;
10116 }
10117
10118 if (nla_get_flag(info->attrs[NL80211_ATTR_RADAR_BACKGROUND])) {
10119 err = cfg80211_start_background_radar_detection(rdev, wdev,
10120 &chandef);
10121 goto unlock;
10122 }
10123
10124 if (cfg80211_beaconing_iface_active(wdev) || wdev->cac_started) {
10125 err = -EBUSY;
10126 goto unlock;
10127 }
10128
10129 /* CAC start is offloaded to HW and can't be started manually */
10130 if (wiphy_ext_feature_isset(wiphy, NL80211_EXT_FEATURE_DFS_OFFLOAD)) {
10131 err = -EOPNOTSUPP;
10132 goto unlock;
10133 }
10134
10135 if (!rdev->ops->start_radar_detection) {
10136 err = -EOPNOTSUPP;
10137 goto unlock;
10138 }
10139
10140 cac_time_ms = cfg80211_chandef_dfs_cac_time(&rdev->wiphy, &chandef);
10141 if (WARN_ON(!cac_time_ms))
10142 cac_time_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
10143
10144 err = rdev_start_radar_detection(rdev, dev, &chandef, cac_time_ms);
10145 if (!err) {
10146 switch (wdev->iftype) {
10147 case NL80211_IFTYPE_MESH_POINT:
10148 wdev->u.mesh.chandef = chandef;
10149 break;
10150 case NL80211_IFTYPE_ADHOC:
10151 wdev->u.ibss.chandef = chandef;
10152 break;
10153 case NL80211_IFTYPE_OCB:
10154 wdev->u.ocb.chandef = chandef;
10155 break;
10156 case NL80211_IFTYPE_AP:
10157 case NL80211_IFTYPE_P2P_GO:
10158 wdev->links[0].ap.chandef = chandef;
10159 break;
10160 }
10161 wdev->cac_started = true;
10162 wdev->cac_start_time = jiffies;
10163 wdev->cac_time_ms = cac_time_ms;
10164 }
10165 unlock:
10166 wiphy_unlock(wiphy);
10167
10168 return err;
10169 }
10170
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
kernel test robot
build botkernel test robot noticed the following build warnings:
Hi root,
kernel test robot noticed the following build warnings:
[auto build test WARNING on wireless-next/main]
[also build test WARNING on wireless/main linus/master v6.11-rc3 next-20240812] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/root/cfg80211-Set-the-channel-definition-for-the-different-Wi-Fi-modes-when-starting-CAC/20240812-202257 base: https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git main patch link: https://lore.kernel.org/r/20240812120909.2721400-1-root%40hissam.office.simonwunderlich.net patch subject: [PATCH] cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC config: i386-buildonly-randconfig-005-20240813 (https://download.01.org/0day-ci/archive/20240813/[email protected]/config) compiler: clang version 18.1.5 (https://github.com/llvm/llvm-project 617a15a9eac96088ae5e9134248d8236e34b91b1) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240813/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>):
>> net/wireless/nl80211.c:10146:11: warning: 9 enumeration values not handled in switch: 'NL80211_IFTYPE_UNSPECIFIED', 'NL80211_IFTYPE_STATION', 'NL80211_IFTYPE_AP_VLAN'... [-Wswitch]
10146 | switch (wdev->iftype) {
| ^~~~~~~~~~~~1 warning generated.
vim +10146 net/wireless/nl80211.c
10068
10069 static int nl80211_start_radar_detection(struct sk_buff *skb,
10070 struct genl_info *info)
10071 {
10072 struct cfg80211_registered_device *rdev = info->user_ptr[0];
10073 struct net_device *dev = info->user_ptr[1];
10074 struct wireless_dev *wdev = dev->ieee80211_ptr;
10075 struct wiphy *wiphy = wdev->wiphy;
10076 struct cfg80211_chan_def chandef;
10077 enum nl80211_dfs_regions dfs_region;
10078 unsigned int cac_time_ms;
10079 int err = -EINVAL;
10080
10081 flush_delayed_work(&rdev->dfs_update_channels_wk);
10082
10083 switch (wdev->iftype) {
10084 case NL80211_IFTYPE_AP:
10085 case NL80211_IFTYPE_P2P_GO:
10086 case NL80211_IFTYPE_MESH_POINT:
10087 case NL80211_IFTYPE_ADHOC:
10088 break;
10089 default:
10090 /* caution - see cfg80211_beaconing_iface_active() below */
10091 return -EINVAL;
10092 }
10093
10094 wiphy_lock(wiphy);
10095
10096 dfs_region = reg_get_dfs_region(wiphy);
10097 if (dfs_region == NL80211_DFS_UNSET)
10098 goto unlock;
10099
10100 err = nl80211_parse_chandef(rdev, info, &chandef);
10101 if (err)
10102 goto unlock;
10103
10104 err = cfg80211_chandef_dfs_required(wiphy, &chandef, wdev->iftype);
10105 if (err < 0)
10106 goto unlock;
10107
10108 if (err == 0) {
10109 err = -EINVAL;
10110 goto unlock;
10111 }
10112
10113 if (!cfg80211_chandef_dfs_usable(wiphy, &chandef)) {
10114 err = -EINVAL;
10115 goto unlock;
10116 }
10117
10118 if (nla_get_flag(info->attrs[NL80211_ATTR_RADAR_BACKGROUND])) {
10119 err = cfg80211_start_background_radar_detection(rdev, wdev,
10120 &chandef);
10121 goto unlock;
10122 }
10123
10124 if (cfg80211_beaconing_iface_active(wdev) || wdev->cac_started) {
10125 err = -EBUSY;
10126 goto unlock;
10127 }
10128
10129 /* CAC start is offloaded to HW and can't be started manually */
10130 if (wiphy_ext_feature_isset(wiphy, NL80211_EXT_FEATURE_DFS_OFFLOAD)) {
10131 err = -EOPNOTSUPP;
10132 goto unlock;
10133 }
10134
10135 if (!rdev->ops->start_radar_detection) {
10136 err = -EOPNOTSUPP;
10137 goto unlock;
10138 }
10139
10140 cac_time_ms = cfg80211_chandef_dfs_cac_time(&rdev->wiphy, &chandef);
10141 if (WARN_ON(!cac_time_ms))
10142 cac_time_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
10143
10144 err = rdev_start_radar_detection(rdev, dev, &chandef, cac_time_ms);
10145 if (!err) {
10146 switch (wdev->iftype) {
10147 case NL80211_IFTYPE_MESH_POINT:
10148 wdev->u.mesh.chandef = chandef;
10149 break;
10150 case NL80211_IFTYPE_ADHOC:
10151 wdev->u.ibss.chandef = chandef;
10152 break;
10153 case NL80211_IFTYPE_OCB:
10154 wdev->u.ocb.chandef = chandef;
10155 break;
10156 case NL80211_IFTYPE_AP:
10157 case NL80211_IFTYPE_P2P_GO:
10158 wdev->links[0].ap.chandef = chandef;
10159 break;
10160 }
10161 wdev->cac_started = true;
10162 wdev->cac_start_time = jiffies;
10163 wdev->cac_time_ms = cac_time_ms;
10164 }
10165 unlock:
10166 wiphy_unlock(wiphy);
10167
10168 return err;
10169 }
10170
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
PATCH 1/1 cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24
--- net/wireless/nl80211.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
net/wireless/nl80211.c +17 -1
@@ -10143,7 +10143,23 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, err =rdev_start_radar_detection (rdev, dev, &chandef, cac_time_ms);if (!err) { - wdev->links[0 ].ap.chandef = chandef; +switch (wdev->iftype) { +case NL80211_IFTYPE_MESH_POINT : + wdev->u.mesh.chandef = chandef; +break ; +case NL80211_IFTYPE_ADHOC : + wdev->u.ibss.chandef = chandef; +break ; +case NL80211_IFTYPE_OCB : + wdev->u.ocb.chandef = chandef; +break ; +case NL80211_IFTYPE_AP : +case NL80211_IFTYPE_P2P_GO : + wdev->links[0 ].ap.chandef = chandef; +break ; +default : +break ; + } wdev->cac_started = true; wdev->cac_start_time = jiffies; wdev->cac_time_ms = cac_time_ms;
base-commit: cc32e9fb380d8afdbf3486d7063d5520bfb0f071
Signature · 1 line
2.39.2
Quoted 29 lines · Issam Hamdi
When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at
cfg80211_chandef_dfs_usable+0x20/0xaf[cfg80211]" caused by the chandef.chan being null at the end of CAC.Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24
Quoted 2 lines
Signed-off-by Issam Hamdi <[email protected]>Signed-off-by Kretschmer Mathias <[email protected]>
'wifi:' missing from the subject.
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
PATCH 1/1 wifi: cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24
--- net/wireless/nl80211.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
net/wireless/nl80211.c +17 -1
@@ -10143,7 +10143,23 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, err =rdev_start_radar_detection (rdev, dev, &chandef, cac_time_ms);if (!err) { - wdev->links[0 ].ap.chandef = chandef; +switch (wdev->iftype) { +case NL80211_IFTYPE_MESH_POINT : + wdev->u.mesh.chandef = chandef; +break ; +case NL80211_IFTYPE_ADHOC : + wdev->u.ibss.chandef = chandef; +break ; +case NL80211_IFTYPE_OCB : + wdev->u.ocb.chandef = chandef; +break ; +case NL80211_IFTYPE_AP : +case NL80211_IFTYPE_P2P_GO : + wdev->links[0 ].ap.chandef = chandef; +break ; +default : +break ; + } wdev->cac_started = true; wdev->cac_start_time = jiffies; wdev->cac_time_ms = cac_time_ms;
base-commit: cc32e9fb380d8afdbf3486d7063d5520bfb0f071
Signature · 1 line
2.39.2
Re: [PATCH] wifi: cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
Quoted 29 lines · Issam Hamdi
When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at
cfg80211_chandef_dfs_usable+0x20/0xaf[cfg80211]" caused by the chandef.chan being null at the end of CAC.Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24
Quoted 2 lines
Signed-off-by Issam Hamdi <[email protected]>Signed-off-by Kretschmer Mathias <[email protected]>
When you submit a new version you should mark it as v2 and include a change log what has changed from v1. More info:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches#changelog_missing
And please read the whole wiki page.
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
PATCH v2 1/1 wifi: cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24
---
v2: update the subject
--- net/wireless/nl80211.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
net/wireless/nl80211.c +17 -1
@@ -10143,7 +10143,23 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, err =rdev_start_radar_detection (rdev, dev, &chandef, cac_time_ms);if (!err) { - wdev->links[0 ].ap.chandef = chandef; +switch (wdev->iftype) { +case NL80211_IFTYPE_MESH_POINT : + wdev->u.mesh.chandef = chandef; +break ; +case NL80211_IFTYPE_ADHOC : + wdev->u.ibss.chandef = chandef; +break ; +case NL80211_IFTYPE_OCB : + wdev->u.ocb.chandef = chandef; +break ; +case NL80211_IFTYPE_AP : +case NL80211_IFTYPE_P2P_GO : + wdev->links[0 ].ap.chandef = chandef; +break ; +default : +break ; + } wdev->cac_started = true; wdev->cac_start_time = jiffies; wdev->cac_time_ms = cac_time_ms;
base-commit: cc32e9fb380d8afdbf3486d7063d5520bfb0f071
Signature · 1 line
2.39.2
Re: [PATCH v2] wifi: cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
Quoted 29 lines · Issam Hamdi
When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at
cfg80211_chandef_dfs_usable+0x20/0xaf[cfg80211]" caused by the chandef.chan being null at the end of CAC.Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24
Quoted 2 lines
Signed-off-by Issam Hamdi <[email protected]>Signed-off-by Kretschmer Mathias <[email protected]>
who is this and why is their S-O-B here?
the last S-O-B should be the person who last touched the patch, which is you
please see:
https://www.kernel.org/doc/html/latest/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin
https://www.kernel.org/doc/html/latest/process/submitting-patches.html#when-to-use-acked-by-cc-and-co-developed-by
PATCH v3 1/1 wifi: cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24
---
v2: update the subject
v3: update the second Signed-off-by to Reported-by
--- net/wireless/nl80211.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
net/wireless/nl80211.c +17 -1
@@ -10143,7 +10143,23 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, err =rdev_start_radar_detection (rdev, dev, &chandef, cac_time_ms);if (!err) { - wdev->links[0 ].ap.chandef = chandef; +switch (wdev->iftype) { +case NL80211_IFTYPE_MESH_POINT : + wdev->u.mesh.chandef = chandef; +break ; +case NL80211_IFTYPE_ADHOC : + wdev->u.ibss.chandef = chandef; +break ; +case NL80211_IFTYPE_OCB : + wdev->u.ocb.chandef = chandef; +break ; +case NL80211_IFTYPE_AP : +case NL80211_IFTYPE_P2P_GO : + wdev->links[0 ].ap.chandef = chandef; +break ; +default : +break ; + } wdev->cac_started = true; wdev->cac_start_time = jiffies; wdev->cac_time_ms = cac_time_ms;
base-commit: cc32e9fb380d8afdbf3486d7063d5520bfb0f071
Signature · 1 line
2.39.2
Johannes Berg
maintainerRe: [PATCH v3] wifi: cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
Quoted 7 lines · Issam Hamdi
net/wireless/nl80211.c +1
-1@@ -10143,7 +10143,23 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, err =rdev_start_radar_detection (rdev, dev, &chandef, cac_time_ms);if (!err) { - wdev->links[0 ].ap.chandef = chandef; +switch (wdev->iftype) {
net/wireless/nl80211.c static int nl80211_start_radar_detection(struct sk_buff *skb, · line 10156
Quoted 10 lines
net/wireless/nl80211.c +9
-0+case NL80211_IFTYPE_MESH_POINT : + wdev->u.mesh.chandef = chandef; +break ; +case NL80211_IFTYPE_ADHOC : + wdev->u.ibss.chandef = chandef; +break ; +case NL80211_IFTYPE_OCB : + wdev->u.ocb.chandef = chandef; +break ;
OCB cannot even get to this code given earlier conditions, why are you adding it here?
I guess this should conflict:
https://lore.kernel.org/linux-wireless/[email protected]/
but it's probably not too hard to resolve that.
johannes
Re: [PATCH v3] wifi: cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
Hello,
Quoted 19 lines · Johannes Berg
Quoted 6 lines · Issam Hamdi
net/wireless/nl80211.c +1
-1@@ -10143,7 +10143,23 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, err =rdev_start_radar_detection (rdev, dev, &chandef, cac_time_ms);if (!err) { - wdev->links[0 ].ap.chandef = chandef; +switch (wdev->iftype) {net/wireless/nl80211.c static int nl80211_start_radar_detection(struct sk_buff *skb, · line 10156
Quoted 10 lines
net/wireless/nl80211.c +9
-0+case NL80211_IFTYPE_MESH_POINT : + wdev->u.mesh.chandef = chandef; +break ; +case NL80211_IFTYPE_ADHOC : + wdev->u.ibss.chandef = chandef; +break ; +case NL80211_IFTYPE_OCB : + wdev->u.ocb.chandef = chandef; +break ;OCB cannot even get to this code given earlier conditions, why are you adding it here?
Actually I didn't test it with OCB mode, I added the check on the different modes to make sure that the function "wdev_chandef" return a no NULL chandef for the different modes.
I will remove the check on the OCB mode, if it will impact other implementation.
Quoted 8 lines
I guess this should conflict:
https://lore.kernel.org/linux-wireless/[email protected]/
but it's probably not too hard to resolve that.
johannes
Issam
PATCH v4 1/1 wifi: cfg80211: Set the channel definition for the different Wi-Fi modes when starting CAC
In reply to Johannes BergWhen starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24
---
---
v2: update the subject
v3: update the second Signed-off-by to Reported-by
v4: Remove the check on the OCB mode
--- net/wireless/nl80211.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
net/wireless/nl80211.c +14 -1
@@ -10143,7 +10143,20 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, err =rdev_start_radar_detection (rdev, dev, &chandef, cac_time_ms);if (!err) { - wdev->links[0 ].ap.chandef = chandef; +switch (wdev->iftype) { +case NL80211_IFTYPE_MESH_POINT : + wdev->u.mesh.chandef = chandef; +break ; +case NL80211_IFTYPE_ADHOC : + wdev->u.ibss.chandef = chandef; +break ; +case NL80211_IFTYPE_AP : +case NL80211_IFTYPE_P2P_GO : + wdev->links[0 ].ap.chandef = chandef; +break ; +default : +break ; + } wdev->cac_started = true; wdev->cac_start_time = jiffies; wdev->cac_time_ms = cac_time_ms;
base-commit: cc32e9fb380d8afdbf3486d7063d5520bfb0f071
Signature · 1 line
2.39.2