dt-bindings: watchdog: convert ziirave-wdt.txt to yaml
Frank Li
maintainerPATCH v3 1/1 dt-bindings: watchdog: convert ziirave-wdt.txt to yaml
Convert ziirave-wdt.txt to yaml format.
Additional change:
- Add i2c node in example.
- Add ref to watchdog.yaml
Fix below warning:arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
failed to match any schema with compatible: ['zii,rave-wdt']
---
Change from v2 to v3
- using original driver submitter and wdt maintainer as maintainter
- add conor dooley review tag
- remove value in milliseconds
Change from v1 to v2
- add ref watchdog.yaml
- Remove timeout-sec
--- .../bindings/watchdog/zii,rave-wdt.yaml | 49 +++++++++++++++++++ .../bindings/watchdog/ziirave-wdt.txt | 19 ------- 2 files changed, 49 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml delete mode 100644 Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt
Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml new file +49 -0
@@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/zii,rave-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zodiac RAVE Watchdog Timer + +maintainers: + - Martyn Welch <[email protected]> + - Guenter Roeck <[email protected]> + - Wim Van Sebroeck <[email protected]> + +properties: + compatible: + const: zii,rave-wdt + + reg: + maxItems: 1 + description: i2c slave address of device, usually 0x38 + + reset-duration-ms: + description: + Duration of the pulse generated when the watchdog times + out. + +required: + - compatible + - reg + +allOf: + - $ref: watchdog.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + timeout-sec = <30>; + reset-duration-ms = <30>; + }; + }; +
Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt deleted +0 -19
@@ -1,19 +0,0 @@ -Zodiac RAVE Watchdog Timer - -Required properties: -- compatible: must be "zii,rave-wdt" -- reg: i2c slave address of device, usually 0x38 - -Optional Properties: -- timeout-sec: Watchdog timeout value in seconds. -- reset-duration-ms: Duration of the pulse generated when the watchdog times - out. Value in milliseconds. - -Example: - - watchdog@38 { - compatible = "zii,rave-wdt"; - reg = <0x38>; - timeout-sec = <30>; - reset-duration-ms = <30>; - };
Signature · 1 line
2.34.1
Quoted 21 lines · Frank Li
Convert ziirave-wdt.txt to yaml format.
Additional change:
- Add i2c node in example.
- Add ref towatchdog.yamlFix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
failed to match any schema with compatible: ['zii,rave-wdt']Reviewed-by Conor Dooley <[email protected]>Signed-off-by Frank Li <[email protected]>---
Change from v2 to v3
- using original driver submitter and wdt maintainer as maintainter
- add conor dooley review tag
- remove value in millisecondsChange from v1 to v2
- add refwatchdog.yaml
- Remove timeout-sec
Quoted 7 lines
--- .../bindings/watchdog/zii,rave-wdt.yaml | 49 +++++++++++++++++++ .../bindings/watchdog/ziirave-wdt.txt | 19 ------- 2 files changed, 49 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml delete mode 100644 Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt
Applied, thanks!