ALSA/ASoC/SoundWire: Intel: update maximum number of links
Subsystems (4)
Bard Liao
maintainercover ALSA/ASoC/SoundWire: Intel: update maximum number of links
Intel new platforms can have up to 5 SoundWire links.
This series does not apply to SoundWire tree due to recent changes in machine driver. Can we go via ASoC tree with Vinod's Acked-by tag?
Pierre-Louis Bossart (3):
ALSA/ASoC/SoundWire: Intel: use single definition for
SDW_INTEL_MAX_LINKS
soundwire: intel: increase maximum number of links
soundwire: intel: add probe-time check on link id
drivers/soundwire/intel.h | 7 +++++++ drivers/soundwire/intel_ace2x.c | 20 ++++++++++++++++++++ drivers/soundwire/intel_auxdevice.c | 14 ++++++++++++++ include/linux/soundwire/sdw_intel.h | 8 ++++++++ sound/hda/intel-sdw-acpi.c | 5 ++--- sound/soc/intel/boards/sof_sdw.c | 4 +++- sound/soc/intel/boards/sof_sdw_common.h | 4 +--- sound/soc/intel/boards/sof_sdw_hdmi.c | 2 ++ 8 files changed, 57 insertions(+), 7 deletions(-)
Signature · 1 line
2.43.0
Bard Liao
maintainerPATCH 1/3 ALSA/ASoC/SoundWire: Intel: use single definition for SDW_INTEL_MAX_LINKS
From: Pierre-Louis Bossart <[email protected]>
The definitions are currently duplicated in intel-sdw-acpi.c and sof_sdw.c. Move the definition to the sdw_intel.h header, and change the prefix to make it Intel-specific.
No functionality change in this patch.
--- include/linux/soundwire/sdw_intel.h | 5 +++++ sound/hda/intel-sdw-acpi.c | 5 ++--- sound/soc/intel/boards/sof_sdw.c | 4 +++- sound/soc/intel/boards/sof_sdw_common.h | 4 +--- sound/soc/intel/boards/sof_sdw_hdmi.c | 2 ++ 5 files changed, 13 insertions(+), 7 deletions(-)
include/linux/soundwire/sdw_intel.h +5 -0
@@ -447,4 +447,9 @@ extern const struct sdw_intel_hw_ops sdw_intel_lnl_hw_ops;#define SDW_INTEL_DEV_NUM_IDA_MIN 6 +/* +* Max number of links supported in hardware +*/ +#define SDW_INTEL_MAX_LINKS 4 +#endif
sound/hda/intel-sdw-acpi.c +2 -3
@@ -17,7 +17,6 @@#include <linux/string.h> #define SDW_LINK_TYPE 4/* from Intel ACPI documentation */ -#define SDW_MAX_LINKS 4static int ctrl_link_mask;module_param_named (sdw_link_mask, ctrl_link_mask, int,0444 );
@@ -87,9 +86,9 @@ sdw_intel_scan_controller(struct sdw_intel_acpi_info *info) }/* Check count is within bounds */ -if (count >SDW_MAX_LINKS ) { +if (count >SDW_INTEL_MAX_LINKS ) {dev_err (&adev->dev,"Link count %d exceeds max %d\n" , - count,SDW_MAX_LINKS ); + count,SDW_INTEL_MAX_LINKS );return -EINVAL ; }
sound/soc/intel/boards/sof_sdw.c +3 -1
@@ -5,12 +5,14 @@* sof_sdw - ASOC Machine driver for Intel SoundWire platforms */ +#include <linux/acpi.h> #include <linux/bitmap.h> #include <linux/device.h> #include <linux/dmi.h> #include <linux/module.h> #include <linux/soundwire/sdw.h> #include <linux/soundwire/sdw_type.h> +#include <linux/soundwire/sdw_intel.h> #include <sound/soc-acpi.h> #include "sof_sdw_common.h" #include "../../codecs/rt711.h"
@@ -883,7 +885,7 @@ static int create_sdw_dailinks(struct snd_soc_card *card,struct intel_mc_ctx *intel_ctx = (struct intel_mc_ctx *)ctx->private;int ret, i; -for (i =0 ; i <SDW_MAX_LINKS ; i++) +for (i =0 ; i <SDW_INTEL_MAX_LINKS ; i++) intel_ctx->sdw_pin_index[i] =SOC_SDW_INTEL_BIDIR_PDI_BASE ;/* generate DAI links by each sdw link */
sound/soc/intel/boards/sof_sdw_common.h +1 -3
@@ -19,8 +19,6 @@#define SOC_SDW_MAX_CPU_DAIS 16#define SOC_SDW_INTEL_BIDIR_PDI_BASE 2 -#define SDW_MAX_LINKS 4 -/* 8 combinations with 4 links + unused group 0 */ #define SDW_MAX_GROUPS 9
@@ -57,7 +55,7 @@ enum {struct intel_mc_ctx {struct sof_hdmi_private hdmi;/* To store SDW Pin index for each SoundWire link */ -unsigned int sdw_pin_index[SDW_MAX_LINKS ]; +unsigned int sdw_pin_index[SDW_INTEL_MAX_LINKS ]; };extern unsigned long sof_sdw_quirk;
sound/soc/intel/boards/sof_sdw_hdmi.c +2 -0
@@ -5,10 +5,12 @@* sof_sdw_hdmi - Helpers to handle HDMI from generic machine driver */ +#include <linux/acpi.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/list.h> +#include <linux/soundwire/sdw_intel.h> #include <sound/soc.h> #include <sound/soc-acpi.h> #include <sound/jack.h>
Signature · 1 line
2.43.0
Re: [PATCH 1/3] ALSA/ASoC/SoundWire: Intel: use single definition for SDW_INTEL_MAX_LINKS
Quoted 7 lines · Bard Liao
From: Pierre-Louis Bossart <[email protected]>
The definitions are currently duplicated in
intel-sdw-acpi.candsof_sdw.c. Move the definition to thesdw_intel.hheader, and change the prefix to make it Intel-specific.No functionality change in this patch.
Takashi Iwai
Reviewed-byRe: [PATCH 1/3] ALSA/ASoC/SoundWire: Intel: use single definition for SDW_INTEL_MAX_LINKS
Quoted 11 lines · Mark Brown
Quoted 7 lines · Bard Liao
From: Pierre-Louis Bossart <[email protected]>
The definitions are currently duplicated in
intel-sdw-acpi.candsof_sdw.c. Move the definition to thesdw_intel.hheader, and change the prefix to make it Intel-specific.No functionality change in this patch.
Acked-by Mark Brown <[email protected]>
As Bard requested, the series can go via ASoC tree.
Feel free to take my ack for HDA part.
Takashi
Bard Liao
maintainerPATCH 2/3 soundwire: intel: increase maximum number of links
In reply to Bard LiaoFrom: Pierre-Louis Bossart <[email protected]>
Intel platforms have enabled 4 links since the beginning, newer platforms now have 5 links. Update the definition accordingly.
This patch will have no effect on older platforms where the number of links was hard-coded. A follow-up patch will add a dynamic check that the ACPI-reported information is aligned with hardware capabilities on newer platforms.
--- include/linux/soundwire/sdw_intel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/soundwire/sdw_intel.h +1 -1
@@ -450,6 +450,6 @@ extern const struct sdw_intel_hw_ops sdw_intel_lnl_hw_ops;/* * Max number of links supported in hardware */ -#define SDW_INTEL_MAX_LINKS 4 +#define SDW_INTEL_MAX_LINKS 5#endif
Signature · 1 line
2.43.0
Re: [PATCH 2/3] soundwire: intel: increase maximum number of links
Quoted 9 lines · Bard Liao
From: Pierre-Louis Bossart <[email protected]>
Intel platforms have enabled 4 links since the beginning, newer platforms now have 5 links. Update the definition accordingly.
This patch will have no effect on older platforms where the number of links was hard-coded. A follow-up patch will add a dynamic check that the ACPI-reported information is aligned with hardware capabilities on newer platforms.
Should this not be the third patch, the dynamic check in 3rd should come before otherwise your older platforms might break?
Other than order lgtm:
Quoted 21 lines
Signed-off-by Pierre-Louis Bossart <[email protected]>Reviewed-by Péter Ujfalusi <[email protected]>Signed-off-by Bard Liao <[email protected]>--- include/linux/soundwire/sdw_intel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/linux/soundwire/sdw_intel.h +1
-1@@ -450,6 +450,6 @@ extern const struct sdw_intel_hw_ops sdw_intel_lnl_hw_ops;/* * Max number of links supported in hardware */ -#define SDW_INTEL_MAX_LINKS 4 +#define SDW_INTEL_MAX_LINKS 5#endif Signature · 1 line
2.43.0
Bard Liao
maintainerPATCH 3/3 soundwire: intel: add probe-time check on link id
In reply to Bard LiaoFrom: Pierre-Louis Bossart <[email protected]>
In older platforms, the number of links was constant and hard-coded to
4. Newer platforms can have varying number of links, so we need to add a probe-time check to make sure the ACPI-reported information with _DSD properties is aligned with hardware capabilities reported in the SoundWire LCAP register.
--- drivers/soundwire/intel.h | 7 +++++++ drivers/soundwire/intel_ace2x.c | 20 ++++++++++++++++++++ drivers/soundwire/intel_auxdevice.c | 14 ++++++++++++++ include/linux/soundwire/sdw_intel.h | 3 +++ 4 files changed, 44 insertions(+)
drivers/soundwire/intel.h +7 -0
@@ -222,6 +222,13 @@ static inline bool sdw_intel_sync_check_cmdsync_unlocked(struct sdw_intel *sdw)return false; } +static inline int sdw_intel_get_link_count (struct sdw_intel *sdw) +{ +if (SDW_INTEL_CHECK_OPS (sdw, get_link_count)) +return SDW_INTEL_OPS (sdw, get_link_count)(sdw); +return 4 ;/* default on older generations */ +} +/* common bus management */ int intel_start_bus (struct sdw_intel *sdw);int intel_start_bus_after_reset (struct sdw_intel *sdw);
drivers/soundwire/intel_ace2x.c +20 -0
@@ -706,10 +706,30 @@ static void intel_program_sdi(struct sdw_intel *sdw, int dev_num) __func__, sdw->instance, dev_num); } +static int intel_get_link_count (struct sdw_intel *sdw) +{ +int ret; + + ret =hdac_bus_eml_get_count (sdw->link_res->hbus, true,AZX_REG_ML_LEPTR_ID_SDW ); +if (!ret) { +dev_err (sdw->cdns.dev,"%s: could not retrieve link count\n" , __func__); +return -ENODEV ; + } + +if (ret >SDW_INTEL_MAX_LINKS ) { +dev_err (sdw->cdns.dev,"%s: link count %d exceed max %d\n" , __func__, ret,SDW_INTEL_MAX_LINKS ); +return -EINVAL ; + } + +return ret; +} +const struct sdw_intel_hw_ops sdw_intel_lnl_hw_ops = { .debugfs_init = intel_ace2x_debugfs_init, .debugfs_exit = intel_ace2x_debugfs_exit, + .get_link_count = intel_get_link_count, + .register_dai = intel_register_dai, .check_clock_stop = intel_check_clock_stop,
drivers/soundwire/intel_auxdevice.c +14 -0
@@ -317,6 +317,20 @@ static int intel_link_probe(struct auxiliary_device *auxdev, bus->link_id = auxdev->id; bus->clk_stop_timeout =1 ; +/* +* paranoia check: make sure ACPI-reported number of links is aligned with +* hardware capabilities. +*/ + ret =sdw_intel_get_link_count (sdw); +if (ret <0 ) { +dev_err (dev,"%s: sdw_intel_get_link_count failed: %d\n" , __func__, ret); +return ret; + } +if (ret <= sdw->instance) { +dev_err (dev,"%s: invalid link id %d, link count %d\n" , __func__, auxdev->id, ret); +return -EINVAL ; + } +sdw_cdns_probe (cdns);/* Set ops */
include/linux/soundwire/sdw_intel.h +3 -0
@@ -388,6 +388,7 @@ struct sdw_intel;/* struct intel_sdw_hw_ops - SoundWire ops for Intel platforms. * @debugfs_init: initialize all debugfs capabilities * @debugfs_exit: close and cleanup debugfs capabilities +* @get_link_count: fetch link count from hardware registers * @register_dai: read all PDI information and register DAIs * @check_clock_stop: throw error message if clock is not stopped. * @start_bus: normal start
@@ -412,6 +413,8 @@ struct sdw_intel_hw_ops {void (*debugfs_init)(struct sdw_intel *sdw);void (*debugfs_exit)(struct sdw_intel *sdw); +int (*get_link_count)(struct sdw_intel *sdw); +int (*register_dai)(struct sdw_intel *sdw);void (*check_clock_stop)(struct sdw_intel *sdw);
Signature · 1 line
2.43.0
Re: [PATCH 3/3] soundwire: intel: add probe-time check on link id
Quoted 7 lines · Bard Liao
From: Pierre-Louis Bossart <[email protected]>
In older platforms, the number of links was constant and hard-coded to
4. Newer platforms can have varying number of links, so we need to add a probe-time check to make sure the ACPI-reported information with_DSDproperties is aligned with hardware capabilities reported in the SoundWire LCAP register.
Signature · 1 line
~Vinod
Mark Brown
maintainerQuoted 11 lines · Bard Liao
Intel new platforms can have up to 5 SoundWire links.
This series does not apply to SoundWire tree due to recent changes in machine driver. Can we go via ASoC tree with Vinod's Acked-by tag?Pierre-Louis Bossart (3):
ALSA/ASoC/SoundWire: Intel: use single definition for
SDW_INTEL_MAX_LINKS
soundwire: intel: increase maximum number of links
soundwire: intel: add probe-time check on link id[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/3] ALSA/ASoC/SoundWire: Intel: use single definition for SDW_INTEL_MAX_LINKS
commit: b27404b2bbf951a11500525dea15681cc970226c
[2/3] soundwire: intel: increase maximum number of links
commit: 1f3662838a05f1ab6af89a417f6f252d91d0806b
[3/3] soundwire: intel: add probe-time check on link id
commit: d2234596be2192d9c1ae34f8c7534531191bc433All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark