Skip to contentSkip to conversation

iio: dac: ad5449: drop support for platform data

PATCH In review Bartosz Golaszewski 2 participants 3 messages Aug 14, 2024 – Aug 26, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 iio: dac: ad5449: drop support for platform data

From: Bartosz Golaszewski <[email protected]>

There are no longer any users of the platform data struct. Remove support for it from the driver.

---
 drivers/iio/dac/ad5449.c             | 15 ++---------
 include/linux/platform_data/ad5449.h | 39 ----------------------------
 2 files changed, 2 insertions(+), 52 deletions(-)
 delete mode 100644 include/linux/platform_data/ad5449.h
drivers/iio/dac/ad5449.c +2 -13
index 4572d6f49275..953fcfa2110b 100644
@@ -20,8 +20,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
-#include <linux/platform_data/ad5449.h>
-
 #define AD5449_MAX_CHANNELS		2
 #define AD5449_MAX_VREFS		2
 
@@ -268,7 +266,6 @@ static const char *ad5449_vref_name(struct ad5449 *st, int n)
 
 static int ad5449_spi_probe(struct spi_device *spi)
 {
-	struct ad5449_platform_data *pdata = spi->dev.platform_data;
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	struct iio_dev *indio_dev;
 	struct ad5449 *st;
@@ -306,16 +303,8 @@ static int ad5449_spi_probe(struct spi_device *spi)
 	mutex_init(&st->lock);
 
 	if (st->chip_info->has_ctrl) {
-		unsigned int ctrl = 0x00;
-		if (pdata) {
-			if (pdata->hardware_clear_to_midscale)
-				ctrl |= AD5449_CTRL_HCLR_TO_MIDSCALE;
-			ctrl |= pdata->sdo_mode << AD5449_CTRL_SDO_OFFSET;
-			st->has_sdo = pdata->sdo_mode != AD5449_SDO_DISABLED;
-		} else {
-			st->has_sdo = true;
-		}
-		ad5449_write(indio_dev, AD5449_CMD_CTRL, ctrl);
+		st->has_sdo = true;
+		ad5449_write(indio_dev, AD5449_CMD_CTRL, 0x0);
 	}
 
 	ret = iio_device_register(indio_dev);
include/linux/platform_data/ad5449.h deleted +0 -39
deleted file mode 100644
index d687ef5726c2..000000000000
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog
- * Converter driver.
- *
- * Copyright 2012 Analog Devices Inc.
- *  Author: Lars-Peter Clausen <[email protected]>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_AD5449_H__
-#define __LINUX_PLATFORM_DATA_AD5449_H__
-
-/**
- * enum ad5449_sdo_mode - AD5449 SDO pin configuration
- * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength.
- * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength.
- * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode.
- * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to
- *			read back from the device.
- */
-enum ad5449_sdo_mode {
-	AD5449_SDO_DRIVE_FULL = 0x0,
-	AD5449_SDO_DRIVE_WEAK = 0x1,
-	AD5449_SDO_OPEN_DRAIN = 0x2,
-	AD5449_SDO_DISABLED = 0x3,
-};
-
-/**
- * struct ad5449_platform_data - Platform data for the ad5449 DAC driver
- * @sdo_mode: SDO pin mode
- * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the
- *			outputs to midscale (true) or to zero scale(false).
- */
-struct ad5449_platform_data {
-	enum ad5449_sdo_mode sdo_mode;
-	bool hardware_clear_to_midscale;
-};
-
-#endif
Signature · 1 line
2.43.0
maintainer
#1 lore raw
Quoted 6 lines · On Wed, 14 Aug 2024 11:26:29 +0200 Bartosz Golaszewski <[email protected]> wrote:

From: Bartosz Golaszewski <[email protected]>

There are no longer any users of the platform data struct. Remove support for it from the driver.

I'm fine with this but want an ADI ack.

Jonathan

Quoted 91 lines
---
 drivers/iio/dac/ad5449.c             | 15 ++---------
 include/linux/platform_data/ad5449.h | 39 ----------------------------
 2 files changed, 2 insertions(+), 52 deletions(-)
 delete mode 100644 include/linux/platform_data/ad5449.h
drivers/iio/dac/ad5449.c +2 -13
index 4572d6f49275..953fcfa2110b 100644
@@ -20,8 +20,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
-#include <linux/platform_data/ad5449.h>
-
 #define AD5449_MAX_CHANNELS		2
 #define AD5449_MAX_VREFS		2
 
@@ -268,7 +266,6 @@ static const char *ad5449_vref_name(struct ad5449 *st, int n)
 
 static int ad5449_spi_probe(struct spi_device *spi)
 {
-	struct ad5449_platform_data *pdata = spi->dev.platform_data;
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	struct iio_dev *indio_dev;
 	struct ad5449 *st;
@@ -306,16 +303,8 @@ static int ad5449_spi_probe(struct spi_device *spi)
 	mutex_init(&st->lock);
 
 	if (st->chip_info->has_ctrl) {
-		unsigned int ctrl = 0x00;
-		if (pdata) {
-			if (pdata->hardware_clear_to_midscale)
-				ctrl |= AD5449_CTRL_HCLR_TO_MIDSCALE;
-			ctrl |= pdata->sdo_mode << AD5449_CTRL_SDO_OFFSET;
-			st->has_sdo = pdata->sdo_mode != AD5449_SDO_DISABLED;
-		} else {
-			st->has_sdo = true;
-		}
-		ad5449_write(indio_dev, AD5449_CMD_CTRL, ctrl);
+		st->has_sdo = true;
+		ad5449_write(indio_dev, AD5449_CMD_CTRL, 0x0);
 	}
 
 	ret = iio_device_register(indio_dev);
include/linux/platform_data/ad5449.h deleted +0 -39
deleted file mode 100644
index d687ef5726c2..000000000000
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog
- * Converter driver.
- *
- * Copyright 2012 Analog Devices Inc.
- *  Author: Lars-Peter Clausen <[email protected]>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_AD5449_H__
-#define __LINUX_PLATFORM_DATA_AD5449_H__
-
-/**
- * enum ad5449_sdo_mode - AD5449 SDO pin configuration
- * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength.
- * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength.
- * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode.
- * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to
- *			read back from the device.
- */
-enum ad5449_sdo_mode {
-	AD5449_SDO_DRIVE_FULL = 0x0,
-	AD5449_SDO_DRIVE_WEAK = 0x1,
-	AD5449_SDO_OPEN_DRAIN = 0x2,
-	AD5449_SDO_DISABLED = 0x3,
-};
-
-/**
- * struct ad5449_platform_data - Platform data for the ad5449 DAC driver
- * @sdo_mode: SDO pin mode
- * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the
- *			outputs to midscale (true) or to zero scale(false).
- */
-struct ad5449_platform_data {
-	enum ad5449_sdo_mode sdo_mode;
-	bool hardware_clear_to_midscale;
-};
-
-#endif
maintainer
#2 lore raw
Quoted 11 lines · On Sat, 17 Aug 2024 12:32:10 +0100 Jonathan Cameron <[email protected]> wrote:
Quoted 6 lines · On Wed, 14 Aug 2024 11:26:29 +0200 Bartosz Golaszewski <[email protected]> wrote:

From: Bartosz Golaszewski <[email protected]>

There are no longer any users of the platform data struct. Remove support for it from the driver.

I'm fine with this but want an ADI ack.

Well no one screamed no, which probably means anyone seeing the patch title was fine with the concept and didn't open the thread :) (or given time of year, they are all on holiday!)

Anyhow, applied. If it turns out it's still needed I might revert on request.

Jonathan

Quoted 96 lines

Jonathan

Quoted 91 lines
---
 drivers/iio/dac/ad5449.c             | 15 ++---------
 include/linux/platform_data/ad5449.h | 39 ----------------------------
 2 files changed, 2 insertions(+), 52 deletions(-)
 delete mode 100644 include/linux/platform_data/ad5449.h
drivers/iio/dac/ad5449.c +2 -13
index 4572d6f49275..953fcfa2110b 100644
@@ -20,8 +20,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
-#include <linux/platform_data/ad5449.h>
-
 #define AD5449_MAX_CHANNELS		2
 #define AD5449_MAX_VREFS		2
 
@@ -268,7 +266,6 @@ static const char *ad5449_vref_name(struct ad5449 *st, int n)
 
 static int ad5449_spi_probe(struct spi_device *spi)
 {
-	struct ad5449_platform_data *pdata = spi->dev.platform_data;
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	struct iio_dev *indio_dev;
 	struct ad5449 *st;
@@ -306,16 +303,8 @@ static int ad5449_spi_probe(struct spi_device *spi)
 	mutex_init(&st->lock);
 
 	if (st->chip_info->has_ctrl) {
-		unsigned int ctrl = 0x00;
-		if (pdata) {
-			if (pdata->hardware_clear_to_midscale)
-				ctrl |= AD5449_CTRL_HCLR_TO_MIDSCALE;
-			ctrl |= pdata->sdo_mode << AD5449_CTRL_SDO_OFFSET;
-			st->has_sdo = pdata->sdo_mode != AD5449_SDO_DISABLED;
-		} else {
-			st->has_sdo = true;
-		}
-		ad5449_write(indio_dev, AD5449_CMD_CTRL, ctrl);
+		st->has_sdo = true;
+		ad5449_write(indio_dev, AD5449_CMD_CTRL, 0x0);
 	}
 
 	ret = iio_device_register(indio_dev);
include/linux/platform_data/ad5449.h deleted +0 -39
deleted file mode 100644
index d687ef5726c2..000000000000
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog
- * Converter driver.
- *
- * Copyright 2012 Analog Devices Inc.
- *  Author: Lars-Peter Clausen <[email protected]>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_AD5449_H__
-#define __LINUX_PLATFORM_DATA_AD5449_H__
-
-/**
- * enum ad5449_sdo_mode - AD5449 SDO pin configuration
- * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength.
- * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength.
- * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode.
- * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to
- *			read back from the device.
- */
-enum ad5449_sdo_mode {
-	AD5449_SDO_DRIVE_FULL = 0x0,
-	AD5449_SDO_DRIVE_WEAK = 0x1,
-	AD5449_SDO_OPEN_DRAIN = 0x2,
-	AD5449_SDO_DISABLED = 0x3,
-};
-
-/**
- * struct ad5449_platform_data - Platform data for the ad5449 DAC driver
- * @sdo_mode: SDO pin mode
- * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the
- *			outputs to midscale (true) or to zero scale(false).
- */
-struct ad5449_platform_data {
-	enum ad5449_sdo_mode sdo_mode;
-	bool hardware_clear_to_midscale;
-};
-
-#endif