Skip to contentSkip to conversation

arm64: dts: imx8mp-beacon: Enable DW HDMI Bridge

PATCH Applied Adam Ford 2 participants 2 messages Aug 19, 2024 – Aug 31, 2024

Subsystems (2)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH v2 1/1 arm64: dts: imx8mp-beacon: Enable DW HDMI Bridge

There is a second HDMI connector on the baseboard which is routed to the DW HDMI bridge through the PVI to the LCDIF3 and requires the HDMI PHY to be enabled too.

---
V2: Fix Missing reg on hdmi_tx port@1 node.

arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +48 -0
index cc9b81d46188..31c33acb560c 100644
@@ -105,6 +105,17 @@ hdmi_con: endpoint {
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector: endpoint {
+				remote-endpoint = <&hdmi_to_connector>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -282,6 +293,26 @@ usb-mux-hog {
 	};
 };
 
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi_to_connector:endpoint {
+				remote-endpoint = <&hdmi_connector>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <384000>;
 	pinctrl-names = "default";
@@ -344,6 +375,10 @@ pcieclk: clock-generator@68 {
 	};
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
 &i2c3 {
 	/* Connected to USB Hub */
 	usb-typec@52 {
@@ -464,6 +499,10 @@ &lcdif1 {
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &micfil {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pdm>;
@@ -646,6 +685,15 @@ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x140
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000010
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c2
Signature · 1 line
2.43.0
Applied
#1 lore raw
Quoted 5 lines · Adam Ford

There is a second HDMI connector on the baseboard which is routed to the DW HDMI bridge through the PVI to the LCDIF3 and requires the HDMI PHY to be enabled too.

Applied, thanks!