rcu/kvfree: Add kvfree_rcu_barrier() API
Uladzislau Rezki (Sony)
maintainerPATCH v2 1/1 rcu/kvfree: Add kvfree_rcu_barrier() API
Add a kvfree_rcu_barrier() function. It waits until all in-flight pointers are freed over RCU machinery. It does not wait any GP completion and it is within its right to return immediately if there are no outstanding pointers.
This function is useful when there is a need to guarantee that a memory is fully freed before destroying memory caches. For example, during unloading a kernel module.
--- include/linux/rcutiny.h | 5 ++ include/linux/rcutree.h | 1 + kernel/rcu/tree.c | 109 +++++++++++++++++++++++++++++++++++++--- 3 files changed, 107 insertions(+), 8 deletions(-)
include/linux/rcutiny.h +5 -0
@@ -111,6 +111,11 @@ static inline void __kvfree_call_rcu(struct rcu_head *head, void *ptr)kvfree (ptr); } +static inline void kvfree_rcu_barrier (void ) +{ +rcu_barrier (); +} +#ifdef CONFIG_KASAN_GENERIC void kvfree_call_rcu (struct rcu_head *head,void *ptr);#else
include/linux/rcutree.h +1 -0
@@ -35,6 +35,7 @@ static inline void rcu_virt_note_context_switch(void)void synchronize_rcu_expedited (void );void kvfree_call_rcu (struct rcu_head *head,void *ptr); +void kvfree_rcu_barrier (void );void rcu_barrier (void );void rcu_momentary_dyntick_idle (void );
kernel/rcu/tree.c +101 -8
136 lines not on this page · raw message
Signature · 1 line
2.39.2
Quoted 11 lines · Uladzislau Rezki (Sony)
Add a
kvfree_rcu_barrier()function. It waits until all in-flight pointers are freed over RCU machinery. It does not wait any GP completion and it is within its right to return immediately if there are no outstanding pointers.This function is useful when there is a need to guarantee that a memory is fully freed before destroying memory caches. For example, during unloading a kernel module.
Signed-off-by Uladzislau Rezki (Sony) <[email protected]>Signed-off-by Vlastimil Babka <[email protected]>
Thanks Ulad, replaced the patch in slab/for-next
Quoted 177 lines
--- include/linux/rcutiny.h | 5 ++ include/linux/rcutree.h | 1 + kernel/rcu/tree.c | 109 +++++++++++++++++++++++++++++++++++++--- 3 files changed, 107 insertions(+), 8 deletions(-)include/linux/rcutiny.h +5
-0@@ -111,6 +111,11 @@ static inline void __kvfree_call_rcu(struct rcu_head *head, void *ptr)kvfree (ptr); } +static inline void kvfree_rcu_barrier (void ) +{ +rcu_barrier (); +} +#ifdef CONFIG_KASAN_GENERIC void kvfree_call_rcu (struct rcu_head *head,void *ptr);#else include/linux/rcutree.h +1
-0@@ -35,6 +35,7 @@ static inline void rcu_virt_note_context_switch(void)void synchronize_rcu_expedited (void );void kvfree_call_rcu (struct rcu_head *head,void *ptr); +void kvfree_rcu_barrier (void );void rcu_barrier (void );void rcu_momentary_dyntick_idle (void );kernel/rcu/tree.c +101
-8@@ -3584,18 +3584,15 @@ kvfree_rcu_drain_ready(struct kfree_rcu_cpu *krcp) }/* -* This function is invoked after the KFREE_DRAIN_JIFFIES timeout. +* Return: %true if a work is queued, %false otherwise. */ -static void kfree_rcu_monitor (struct work_struct *work) +static bool +kvfree_rcu_queue_batch (struct kfree_rcu_cpu *krcp) { -struct kfree_rcu_cpu *krcp =container_of (work, - struct kfree_rcu_cpu, monitor_work.work);unsigned long flags; +bool queued = false;int i, j; -// Drain ready for reclaim. -kvfree_rcu_drain_ready (krcp); -raw_spin_lock_irqsave (&krcp->lock, flags);// Attempt to start a new batch. @@ -3634,11 +3631,27 @@ static void kfree_rcu_monitor(struct work_struct *work)// be that the work is in the pending state when // channels have been detached following by each // other. -queue_rcu_work (system_wq, &krwp->rcu_work); + queued =queue_rcu_work (system_wq, &krwp->rcu_work); } }raw_spin_unlock_irqrestore (&krcp->lock, flags); +return queued; +} + +/* +* This function is invoked after the KFREE_DRAIN_JIFFIES timeout. +*/ +static void kfree_rcu_monitor (struct work_struct *work) +{ +struct kfree_rcu_cpu *krcp =container_of (work, + struct kfree_rcu_cpu, monitor_work.work); + +// Drain ready for reclaim. +kvfree_rcu_drain_ready (krcp); + +// Queue a batch for a rest. +kvfree_rcu_queue_batch (krcp);// If there is nothing to detach, it means that our job is // successfully done here. In case of having at least one @@ -3859,6 +3872,86 @@ void kvfree_call_rcu(struct rcu_head *head, void *ptr) }EXPORT_SYMBOL_GPL (kvfree_call_rcu); +/** +* kvfree_rcu_barrier - Wait until all in-flight kvfree_rcu() complete. +* +* Note that a single argument of kvfree_rcu() call has a slow path that +* triggers synchronize_rcu() following by freeing a pointer. It is done +* before the return from the function. Therefore for any single-argument +* call that will result in a kfree() to a cache that is to be destroyed +* during module exit, it is developer's responsibility to ensure that all +* such calls have returned before the call to kmem_cache_destroy(). +*/ +void kvfree_rcu_barrier (void ) +{ +struct kfree_rcu_cpu_work *krwp; +struct kfree_rcu_cpu *krcp; +bool queued; +int i, cpu; + +/* +* Firstly we detach objects and queue them over an RCU-batch +* for all CPUs. Finally queued works are flushed for each CPU. +* +* Please note. If there are outstanding batches for a particular +* CPU, those have to be finished first following by queuing a new. +*/ +for_each_possible_cpu (cpu) { + krcp =per_cpu_ptr (&krc, cpu); + +/* +* Check if this CPU has any objects which have been queued for a +* new GP completion. If not(means nothing to detach), we are done +* with it. If any batch is pending/running for this "krcp", below +* per-cpu flush_rcu_work() waits its completion(see last step). +*/ +if (!need_offload_krc (krcp)) +continue ; + +while (1 ) { +/* +* If we are not able to queue a new RCU work it means: +* - batches for this CPU are still in flight which should +* be flushed first and then repeat; +* - no objects to detach, because of concurrency. +*/ + queued =kvfree_rcu_queue_batch (krcp); + +/* +* Bail out, if there is no need to offload this "krcp" +* anymore. As noted earlier it can run concurrently. +*/ +if (queued || !need_offload_krc (krcp)) +break ; + +/* There are ongoing batches. */ +for (i =0 ; i <KFREE_N_BATCHES ; i++) { + krwp = &(krcp->krw_arr[i]); +flush_rcu_work (&krwp->rcu_work); + } + } + } + +/* +* Now we guarantee that all objects are flushed. +*/ +for_each_possible_cpu (cpu) { + krcp =per_cpu_ptr (&krc, cpu); + +/* +* A monitor work can drain ready to reclaim objects +* directly. Wait its completion if running or pending. +*/ +cancel_delayed_work_sync (&krcp->monitor_work); + +for (i =0 ; i <KFREE_N_BATCHES ; i++) { + krwp = &(krcp->krw_arr[i]); +flush_rcu_work (&krwp->rcu_work); + } + } +} +EXPORT_SYMBOL_GPL (kvfree_rcu_barrier); +static unsigned long kfree_rcu_shrink_count (struct shrinker *shrink,struct shrink_control *sc) {
Uladzislau Rezki
maintainerQuoted 6 lines · Vlastimil Babka
Quoted 5 lines · Uladzislau Rezki (Sony)
Add a
kvfree_rcu_barrier()function. It waits until all in-flight pointers are freed over RCU machinery. It does not wait any GP completion and it is within its right to return immediately if there are no outstanding pointers.
Quoted 9 lines
Quoted 6 lines
This function is useful when there is a need to guarantee that a memory is fully freed before destroying memory caches. For example, during unloading a kernel module.
Signed-off-by Uladzislau Rezki (Sony) <[email protected]>Signed-off-by Vlastimil Babka <[email protected]>Thanks Ulad, replaced the patch in slab/for-next
You are welcome :)
--
Uladzislau Rezki
Paul E. McKenney
maintainerQuoted 11 lines · Uladzislau Rezki (Sony)
Add a
kvfree_rcu_barrier()function. It waits until all in-flight pointers are freed over RCU machinery. It does not wait any GP completion and it is within its right to return immediately if there are no outstanding pointers.This function is useful when there is a need to guarantee that a memory is fully freed before destroying memory caches. For example, during unloading a kernel module.
Signed-off-by Uladzislau Rezki (Sony) <[email protected]>Signed-off-by Vlastimil Babka <[email protected]>
As a follow-on patch, once kvfree_rcu_barrier() is accepted into mainline, should we add a call to kvfree_rcu_barrier() to the rcu_barrier_throttled() function in kernel/rcu/tree.c?
This would allow the do_rcu_barrier module parameter to be used to clear out kfree_rcu() as well as call_rcu() work. This would be useful to people running userspace benchmarks that cause the kernel to do a lot of kfree_rcu() calls. Always good to avoid messing up the results from the current run due to deferred work from the previous run. Even better would be to actually account for the deferred work, but do_rcu_barrier can help with that as well. ;-)
Thoughts?
Thanx, Paul
Quoted 180 lines
--- include/linux/rcutiny.h | 5 ++ include/linux/rcutree.h | 1 + kernel/rcu/tree.c | 109 +++++++++++++++++++++++++++++++++++++--- 3 files changed, 107 insertions(+), 8 deletions(-)include/linux/rcutiny.h +5
-0@@ -111,6 +111,11 @@ static inline void __kvfree_call_rcu(struct rcu_head *head, void *ptr)kvfree (ptr); } +static inline void kvfree_rcu_barrier (void ) +{ +rcu_barrier (); +} +#ifdef CONFIG_KASAN_GENERIC void kvfree_call_rcu (struct rcu_head *head,void *ptr);#else include/linux/rcutree.h +1
-0@@ -35,6 +35,7 @@ static inline void rcu_virt_note_context_switch(void)void synchronize_rcu_expedited (void );void kvfree_call_rcu (struct rcu_head *head,void *ptr); +void kvfree_rcu_barrier (void );void rcu_barrier (void );void rcu_momentary_dyntick_idle (void );kernel/rcu/tree.c +101
-8@@ -3584,18 +3584,15 @@ kvfree_rcu_drain_ready(struct kfree_rcu_cpu *krcp) }/* -* This function is invoked after the KFREE_DRAIN_JIFFIES timeout. +* Return: %true if a work is queued, %false otherwise. */ -static void kfree_rcu_monitor (struct work_struct *work) +static bool +kvfree_rcu_queue_batch (struct kfree_rcu_cpu *krcp) { -struct kfree_rcu_cpu *krcp =container_of (work, - struct kfree_rcu_cpu, monitor_work.work);unsigned long flags; +bool queued = false;int i, j; -// Drain ready for reclaim. -kvfree_rcu_drain_ready (krcp); -raw_spin_lock_irqsave (&krcp->lock, flags);// Attempt to start a new batch. @@ -3634,11 +3631,27 @@ static void kfree_rcu_monitor(struct work_struct *work)// be that the work is in the pending state when // channels have been detached following by each // other. -queue_rcu_work (system_wq, &krwp->rcu_work); + queued =queue_rcu_work (system_wq, &krwp->rcu_work); } }raw_spin_unlock_irqrestore (&krcp->lock, flags); +return queued; +} + +/* +* This function is invoked after the KFREE_DRAIN_JIFFIES timeout. +*/ +static void kfree_rcu_monitor (struct work_struct *work) +{ +struct kfree_rcu_cpu *krcp =container_of (work, + struct kfree_rcu_cpu, monitor_work.work); + +// Drain ready for reclaim. +kvfree_rcu_drain_ready (krcp); + +// Queue a batch for a rest. +kvfree_rcu_queue_batch (krcp);// If there is nothing to detach, it means that our job is // successfully done here. In case of having at least one @@ -3859,6 +3872,86 @@ void kvfree_call_rcu(struct rcu_head *head, void *ptr) }EXPORT_SYMBOL_GPL (kvfree_call_rcu); +/** +* kvfree_rcu_barrier - Wait until all in-flight kvfree_rcu() complete. +* +* Note that a single argument of kvfree_rcu() call has a slow path that +* triggers synchronize_rcu() following by freeing a pointer. It is done +* before the return from the function. Therefore for any single-argument +* call that will result in a kfree() to a cache that is to be destroyed +* during module exit, it is developer's responsibility to ensure that all +* such calls have returned before the call to kmem_cache_destroy(). +*/ +void kvfree_rcu_barrier (void ) +{ +struct kfree_rcu_cpu_work *krwp; +struct kfree_rcu_cpu *krcp; +bool queued; +int i, cpu; + +/* +* Firstly we detach objects and queue them over an RCU-batch +* for all CPUs. Finally queued works are flushed for each CPU. +* +* Please note. If there are outstanding batches for a particular +* CPU, those have to be finished first following by queuing a new. +*/ +for_each_possible_cpu (cpu) { + krcp =per_cpu_ptr (&krc, cpu); + +/* +* Check if this CPU has any objects which have been queued for a +* new GP completion. If not(means nothing to detach), we are done +* with it. If any batch is pending/running for this "krcp", below +* per-cpu flush_rcu_work() waits its completion(see last step). +*/ +if (!need_offload_krc (krcp)) +continue ; + +while (1 ) { +/* +* If we are not able to queue a new RCU work it means: +* - batches for this CPU are still in flight which should +* be flushed first and then repeat; +* - no objects to detach, because of concurrency. +*/ + queued =kvfree_rcu_queue_batch (krcp); + +/* +* Bail out, if there is no need to offload this "krcp" +* anymore. As noted earlier it can run concurrently. +*/ +if (queued || !need_offload_krc (krcp)) +break ; + +/* There are ongoing batches. */ +for (i =0 ; i <KFREE_N_BATCHES ; i++) { + krwp = &(krcp->krw_arr[i]); +flush_rcu_work (&krwp->rcu_work); + } + } + } + +/* +* Now we guarantee that all objects are flushed. +*/ +for_each_possible_cpu (cpu) { + krcp =per_cpu_ptr (&krc, cpu); + +/* +* A monitor work can drain ready to reclaim objects +* directly. Wait its completion if running or pending. +*/ +cancel_delayed_work_sync (&krcp->monitor_work); + +for (i =0 ; i <KFREE_N_BATCHES ; i++) { + krwp = &(krcp->krw_arr[i]); +flush_rcu_work (&krwp->rcu_work); + } + } +} +EXPORT_SYMBOL_GPL (kvfree_rcu_barrier); +static unsigned long kfree_rcu_shrink_count (struct shrinker *shrink,struct shrink_control *sc) {Signature · 1 line
2.39.2
Uladzislau Rezki
maintainerQuoted 25 lines · Paul E. McKenney
Quoted 11 lines · Uladzislau Rezki (Sony)
Add a
kvfree_rcu_barrier()function. It waits until all in-flight pointers are freed over RCU machinery. It does not wait any GP completion and it is within its right to return immediately if there are no outstanding pointers.This function is useful when there is a need to guarantee that a memory is fully freed before destroying memory caches. For example, during unloading a kernel module.
Signed-off-by Uladzislau Rezki (Sony) <[email protected]>Signed-off-by Vlastimil Babka <[email protected]>As a follow-on patch, once
kvfree_rcu_barrier()is accepted into mainline, should we add a call tokvfree_rcu_barrier()to thercu_barrier_throttled()function inkernel/rcu/tree.c?This would allow the
do_rcu_barriermodule parameter to be used to clear outkfree_rcu()as well ascall_rcu()work. This would be useful to people running userspace benchmarks that cause the kernel to do a lot ofkfree_rcu()calls. Always good to avoid messing up the results from the current run due to deferred work from the previous run. Even better would be to actually account for the deferred work, butdo_rcu_barriercan help with that as well. ;-)
Quoted 2 lines
Thoughts?
Makes sense. To be make sure that all objects are flushed. And as you mentioned it is good to have it for benchmarking as a return to a baseline point.
One issue is probably a "name" which would be common for both:
rcu_barrier()kvfree_rcu_barrier()
i mean /sys/module/rcutree/parameters/do_rcu_barrier. From how i would see it, it is supposed to trigger just rcu_barrier() API.
--
Uladzislau Rezki
Paul E. McKenney
maintainerQuoted 32 lines · Uladzislau Rezki
Quoted 25 lines · Paul E. McKenney
Quoted 11 lines · Uladzislau Rezki (Sony)
Add a
kvfree_rcu_barrier()function. It waits until all in-flight pointers are freed over RCU machinery. It does not wait any GP completion and it is within its right to return immediately if there are no outstanding pointers.This function is useful when there is a need to guarantee that a memory is fully freed before destroying memory caches. For example, during unloading a kernel module.
Signed-off-by Uladzislau Rezki (Sony) <[email protected]>Signed-off-by Vlastimil Babka <[email protected]>As a follow-on patch, once
kvfree_rcu_barrier()is accepted into mainline, should we add a call tokvfree_rcu_barrier()to thercu_barrier_throttled()function inkernel/rcu/tree.c?This would allow the
do_rcu_barriermodule parameter to be used to clear outkfree_rcu()as well ascall_rcu()work. This would be useful to people running userspace benchmarks that cause the kernel to do a lot ofkfree_rcu()calls. Always good to avoid messing up the results from the current run due to deferred work from the previous run. Even better would be to actually account for the deferred work, butdo_rcu_barriercan help with that as well. ;-)Quoted 2 lines
Thoughts?
Makes sense. To be make sure that all objects are flushed. And as you mentioned it is good to have it for benchmarking as a return to a baseline point.
Quoted 7 lines
One issue is probably a "name" which would be common for both:
rcu_barrier()kvfree_rcu_barrier()i mean
/sys/module/rcutree/parameters/do_rcu_barrier. From how i would see it, it is supposed to trigger justrcu_barrier()API.
One approach would be to keep the old functionality, but create a new sysfs variable that does both. Except that to avoid code duplication, we would likely end up with both actually doing both.
Another approach is to rename the sysfs variable. This might work if there are not too many people using it. Might. ;-)
Other approaches?
Thanx, Paul
Uladzislau Rezki
maintainerQuoted 46 lines · Paul E. McKenney
Quoted 32 lines · Uladzislau Rezki
Quoted 25 lines · Paul E. McKenney
Quoted 11 lines · Uladzislau Rezki (Sony)
Add a
kvfree_rcu_barrier()function. It waits until all in-flight pointers are freed over RCU machinery. It does not wait any GP completion and it is within its right to return immediately if there are no outstanding pointers.This function is useful when there is a need to guarantee that a memory is fully freed before destroying memory caches. For example, during unloading a kernel module.
Signed-off-by Uladzislau Rezki (Sony) <[email protected]>Signed-off-by Vlastimil Babka <[email protected]>As a follow-on patch, once
kvfree_rcu_barrier()is accepted into mainline, should we add a call tokvfree_rcu_barrier()to thercu_barrier_throttled()function inkernel/rcu/tree.c?This would allow the
do_rcu_barriermodule parameter to be used to clear outkfree_rcu()as well ascall_rcu()work. This would be useful to people running userspace benchmarks that cause the kernel to do a lot ofkfree_rcu()calls. Always good to avoid messing up the results from the current run due to deferred work from the previous run. Even better would be to actually account for the deferred work, butdo_rcu_barriercan help with that as well. ;-)Quoted 2 lines
Thoughts?
Makes sense. To be make sure that all objects are flushed. And as you mentioned it is good to have it for benchmarking as a return to a baseline point.
Quoted 7 lines
One issue is probably a "name" which would be common for both:
rcu_barrier()kvfree_rcu_barrier()i mean
/sys/module/rcutree/parameters/do_rcu_barrier. From how i would see it, it is supposed to trigger justrcu_barrier()API.One approach would be to keep the old functionality, but create a new sysfs variable that does both. Except that to avoid code duplication, we would likely end up with both actually doing both.
Quoted 5 lines
Another approach is to rename the sysfs variable. This might work if there are not too many people using it. Might. ;-)
Other approaches?
Maybe just rename from/to: do_rcu_barrier -> do_barrier? Probably this would be the best, but as you noted, there might be users :)
To be safe, we can add kvfree_rcu_barrier() to the rcu_barrier_throttled() and document that it does both now!
--
Uladzislau Rezki
Paul E. McKenney
maintainerQuoted 50 lines · Uladzislau Rezki
Quoted 49 lines · Paul E. McKenney
Quoted 32 lines · Uladzislau Rezki
Quoted 25 lines · Paul E. McKenney
Quoted 11 lines · Uladzislau Rezki (Sony)
Add a
kvfree_rcu_barrier()function. It waits until all in-flight pointers are freed over RCU machinery. It does not wait any GP completion and it is within its right to return immediately if there are no outstanding pointers.This function is useful when there is a need to guarantee that a memory is fully freed before destroying memory caches. For example, during unloading a kernel module.
Signed-off-by Uladzislau Rezki (Sony) <[email protected]>Signed-off-by Vlastimil Babka <[email protected]>As a follow-on patch, once
kvfree_rcu_barrier()is accepted into mainline, should we add a call tokvfree_rcu_barrier()to thercu_barrier_throttled()function inkernel/rcu/tree.c?This would allow the
do_rcu_barriermodule parameter to be used to clear outkfree_rcu()as well ascall_rcu()work. This would be useful to people running userspace benchmarks that cause the kernel to do a lot ofkfree_rcu()calls. Always good to avoid messing up the results from the current run due to deferred work from the previous run. Even better would be to actually account for the deferred work, butdo_rcu_barriercan help with that as well. ;-)Quoted 2 lines
Thoughts?
Makes sense. To be make sure that all objects are flushed. And as you mentioned it is good to have it for benchmarking as a return to a baseline point.
Quoted 7 lines
One issue is probably a "name" which would be common for both:
rcu_barrier()kvfree_rcu_barrier()i mean
/sys/module/rcutree/parameters/do_rcu_barrier. From how i would see it, it is supposed to trigger justrcu_barrier()API.One approach would be to keep the old functionality, but create a new sysfs variable that does both. Except that to avoid code duplication, we would likely end up with both actually doing both.
Another approach is to rename the sysfs variable. This might work if there are not too many people using it. Might. ;-)
Quoted 7 lines
Quoted 2 lines
Other approaches?
Maybe just rename from/to:
do_rcu_barrier->do_barrier? Probably this would be the best, but as you noted, there might be users :)To be safe, we can add
kvfree_rcu_barrier()to thercu_barrier_throttled()and document that it does both now!
That does sound safest to me. We just might find that our users (if any) expected that it already did both. ;-)
Thanx, Paul
Uladzislau Rezki
maintainerQuoted 53 lines · Paul E. McKenney
Quoted 52 lines · Uladzislau Rezki
Quoted 51 lines · Paul E. McKenney
Quoted 32 lines · Uladzislau Rezki
Quoted 25 lines · Paul E. McKenney
Quoted 11 lines · Uladzislau Rezki (Sony)
Add a
kvfree_rcu_barrier()function. It waits until all in-flight pointers are freed over RCU machinery. It does not wait any GP completion and it is within its right to return immediately if there are no outstanding pointers.This function is useful when there is a need to guarantee that a memory is fully freed before destroying memory caches. For example, during unloading a kernel module.
Signed-off-by Uladzislau Rezki (Sony) <[email protected]>Signed-off-by Vlastimil Babka <[email protected]>As a follow-on patch, once
kvfree_rcu_barrier()is accepted into mainline, should we add a call tokvfree_rcu_barrier()to thercu_barrier_throttled()function inkernel/rcu/tree.c?This would allow the
do_rcu_barriermodule parameter to be used to clear outkfree_rcu()as well ascall_rcu()work. This would be useful to people running userspace benchmarks that cause the kernel to do a lot ofkfree_rcu()calls. Always good to avoid messing up the results from the current run due to deferred work from the previous run. Even better would be to actually account for the deferred work, butdo_rcu_barriercan help with that as well. ;-)Quoted 2 lines
Thoughts?
Makes sense. To be make sure that all objects are flushed. And as you mentioned it is good to have it for benchmarking as a return to a baseline point.
Quoted 7 lines
One issue is probably a "name" which would be common for both:
rcu_barrier()kvfree_rcu_barrier()i mean
/sys/module/rcutree/parameters/do_rcu_barrier. From how i would see it, it is supposed to trigger justrcu_barrier()API.One approach would be to keep the old functionality, but create a new sysfs variable that does both. Except that to avoid code duplication, we would likely end up with both actually doing both.
Another approach is to rename the sysfs variable. This might work if there are not too many people using it. Might. ;-)
Other approaches?
Quoted 9 lines
Quoted 5 lines
Maybe just rename from/to:
do_rcu_barrier->do_barrier? Probably this would be the best, but as you noted, there might be users :)To be safe, we can add
kvfree_rcu_barrier()to thercu_barrier_throttled()and document that it does both now!That does sound safest to me. We just might find that our users (if any) expected that it already did both. ;-)
Good. Then i will send out the patch!
--
Uladzislau Rezki