Skip to contentSkip to conversation

ARM: imx: Enable cat and xxd commands on Data Modul i.MX8M Mini/Plus eDM SBC

PATCH Applied Marek Vasut 2 participants 2 messages Aug 21, 2024 – Aug 23, 2024 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: imx: Enable cat and xxd commands on Data Modul i.MX8M Mini/Plus eDM SBC

Enable 'cat' command to print file from filesystem to stdout. Enable 'xxd' command to hexdump file from filesystem to stdout.

---
Cc: "NXP i.MX U-Boot Team" <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: [email protected]

---
 configs/imx8mm_data_modul_edm_sbc_defconfig | 2 ++
 configs/imx8mp_data_modul_edm_sbc_defconfig | 2 ++
 2 files changed, 4 insertions(+)
configs/imx8mm_data_modul_edm_sbc_defconfig +2 -0
index f26a8791cd0..17ebe5e743d 100644
@@ -105,6 +105,8 @@ CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_XXD=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_DHCP6=y
 CONFIG_CMD_TFTPPUT=y
configs/imx8mp_data_modul_edm_sbc_defconfig +2 -0
index fe3e757eefd..be47583dd7a 100644
@@ -112,6 +112,8 @@ CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_XXD=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_DHCP6=y
 CONFIG_CMD_TFTPPUT=y
Signature · 1 line
2.43.0
reviewer Applied
#1 lore raw
Quoted 5 lines · Marek Vasut

Enable 'cat' command to print file from filesystem to stdout. Enable 'xxd' command to hexdump file from filesystem to stdout.

Applied, thanks.