Skip to contentSkip to conversation

ARM: dts: microchip: sam9x60: Fix rtc/rtt clock parent

PATCH Superseded Alexander Dahl 3 participants 7 messages Aug 20, 2024 – Aug 24, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: microchip: sam9x60: Fix rtc/rtt clock parent

The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator.

(The Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes.)

Fixes 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
---
 arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/microchip/sam9x60.dtsi +2 -2
index 291540e5d81e..d077afd5024d 100644
@@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
 				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 				reg = <0xfffffe20 0x20>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			pit: timer@fffffe40 {
@@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
 				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
 				reg = <0xfffffea8 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			watchdog: watchdog@ffffff80 {

base-commit: 47ac09b91befbb6a235ab620c32af719f8208399

Signature · 1 line
2.39.2
#1 lore raw

PATCH v2 1/1 ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks

The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator.

(The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes.)

Fixes 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")

---

Notes:
Picked the wrong patch in the first try. This v2 one has a slightly adapted commit message and more context below.

This obviously requires a 32.768 kHz crystal oscillator to be present, but the sam9x60.dtsi does contain that, and the clock-controllers reference that, so I assume it's always present.

/sys/kernel/debug/clk/clk_summary content excerpt before:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 4 4 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 0 0 0 32768 0 0 50000 Y deviceless no_connection_id

And after:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 2 2 0 32768 0 0 50000 Y fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 2 2 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
deviceless no_connection_id

 arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/microchip/sam9x60.dtsi +2 -2
index 291540e5d81e..d077afd5024d 100644
@@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
 				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 				reg = <0xfffffe20 0x20>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			pit: timer@fffffe40 {
@@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
 				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
 				reg = <0xfffffea8 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			watchdog: watchdog@ffffff80 {

base-commit: 47ac09b91befbb6a235ab620c32af719f8208399

Signature · 1 line
2.39.2
#2 lore raw

Re: [PATCH v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks

Quoted 12 lines · Alexander Dahl

The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator.

(The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes.)

Fixes 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")

---

Quoted 7 lines

Notes:
Picked the wrong patch in the first try. This v2 one has a slightly adapted commit message and more context below.

This obviously requires a 32.768 kHz crystal oscillator to be present, but the sam9x60.dtsi does contain that, and the clock-controllers reference that, so I assume it's always present.

The crystal is optional so this is going to break the boards that don't have one. I don't really mind but this should probably be part of the commit message.

This makes me realise that we always assumed the RC oscillator was running at 32768 while the sam9x60 datasheet refers to it has a 32kHz oscillator. However the RTC only has a 32768 divider...

Quoted 59 lines

/sys/kernel/debug/clk/clk_summary content excerpt before:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 4 4 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 0 0 0 32768 0 0 50000 Y deviceless no_connection_id

And after:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 2 2 0 32768 0 0 50000 Y fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 2 2 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
deviceless no_connection_id

 arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/microchip/sam9x60.dtsi +2 -2
index 291540e5d81e..d077afd5024d 100644
@@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
 				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 				reg = <0xfffffe20 0x20>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			pit: timer@fffffe40 {
@@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
 				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
 				reg = <0xfffffea8 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			watchdog: watchdog@ffffff80 {

base-commit: 47ac09b91befbb6a235ab620c32af719f8208399

Signature · 1 line
2.39.2
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#3 lore raw

Re: [PATCH v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks

Hello Alexandre,

Am Thu, Aug 22, 2024 at 01:52:05AM +0200 schrieb Alexandre Belloni:

Quoted 17 lines · Alexander Dahl
Quoted 16 lines

The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator.

(The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes.)

Fixes 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")

---

Notes:
Picked the wrong patch in the first try. This v2 one has a slightly adapted commit message and more context below.

Quoted 7 lines
Quoted 3 lines

This obviously requires a 32.768 kHz crystal oscillator to be present, but the sam9x60.dtsi does contain that, and the clock-controllers reference that, so I assume it's always present.

The crystal is optional so this is going to break the boards that don't have one. I don't really mind but this should probably be part of the commit message.

Okay right, according to the datasheet (Figure 27.1 SCKC Block Diagram) you don't need that crystal, you can clear TD_OSCSEL and td_slck runs from the internal rc then. However, td_slck is always present, it either sources from the internal slow rc oscillator or the crystal oscillator. And the datasheet says in section 29.1 (PMC):

"The Slow Clock Controller (SCKC) selects the source of TD_SLCK (drives the real-time part (RTT/RTC)). The source of MD_SLCK (drives the rest of the system controller: wake-up logic, watchdog, PMC, etc.) is always the slow RC oscillator."

md_slck and td_slck are both registered by the at91 sckc driver, and the td_slck gets two parents in of_sam9x60_sckc_setup() when registered by at91_clk_register_sam9x5_slow(). The parent can be switched by clk_sam9x5_slow_set_parent() from sam9x5_slow_ops then, correctly setting the OSCSEL bit.

The whole idea of the patch is giving the rtc/rtt td_slck as a parent as documented in the datasheet. I don't see how this should be affected by the parents of td_slck? Am I missing something?

Quoted 3 lines

This makes me realise that we always assumed the RC oscillator was running at 32768 while the sam9x60 datasheet refers to it has a 32kHz oscillator. However the RTC only has a 32768 divider...

When sourced from the internal rc oscillator, this would mean the output would be incorrect, right? How could one prove this?

Greets
Alex

Quoted 65 lines
Quoted 60 lines

/sys/kernel/debug/clk/clk_summary content excerpt before:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 4 4 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 0 0 0 32768 0 0 50000 Y deviceless no_connection_id

And after:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 2 2 0 32768 0 0 50000 Y fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 2 2 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
deviceless no_connection_id

 arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/microchip/sam9x60.dtsi +2 -2
index 291540e5d81e..d077afd5024d 100644
@@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
 				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 				reg = <0xfffffe20 0x20>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			pit: timer@fffffe40 {
@@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
 				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
 				reg = <0xfffffea8 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			watchdog: watchdog@ffffff80 {

base-commit: 47ac09b91befbb6a235ab620c32af719f8208399

Signature · 1 line
2.39.2
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#4 lore raw

Re: [PATCH v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks

Quoted 45 lines · Alexander Dahl

Hello Alexandre,

Am Thu, Aug 22, 2024 at 01:52:05AM +0200 schrieb Alexandre Belloni:

Quoted 17 lines · Alexander Dahl
Quoted 16 lines

The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator.

(The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes.)

Fixes 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")

---

Notes:
Picked the wrong patch in the first try. This v2 one has a slightly adapted commit message and more context below.

Quoted 7 lines
Quoted 3 lines

This obviously requires a 32.768 kHz crystal oscillator to be present, but the sam9x60.dtsi does contain that, and the clock-controllers reference that, so I assume it's always present.

The crystal is optional so this is going to break the boards that don't have one. I don't really mind but this should probably be part of the commit message.

Okay right, according to the datasheet (Figure 27.1 SCKC Block Diagram) you don't need that crystal, you can clear TD_OSCSEL and td_slck runs from the internal rc then. However, td_slck is always present, it either sources from the internal slow rc oscillator or the crystal oscillator. And the datasheet says in section 29.1 (PMC):

"The Slow Clock Controller (SCKC) selects the source of TD_SLCK (drives the real-time part (RTT/RTC)). The source of MD_SLCK (drives the rest of the system controller: wake-up logic, watchdog, PMC, etc.) is always the slow RC oscillator."

md_slck and td_slck are both registered by the at91 sckc driver, and the td_slck gets two parents in of_sam9x60_sckc_setup() when registered by at91_clk_register_sam9x5_slow(). The parent can be switched by clk_sam9x5_slow_set_parent() from sam9x5_slow_ops then, correctly setting the OSCSEL bit.

Quoted 4 lines

The whole idea of the patch is giving the rtc/rtt td_slck as a parent as documented in the datasheet. I don't see how this should be affected by the parents of td_slck? Am I missing something?

You are right, I got confused because you were referring t the 32768 Hz crystal in your commit message and though you aimed at selected the parent of td_slck (and also, I didn't really work on the sam9x60).

Quoted 6 lines
Quoted 3 lines

This makes me realise that we always assumed the RC oscillator was running at 32768 while the sam9x60 datasheet refers to it has a 32kHz oscillator. However the RTC only has a 32768 divider...

When sourced from the internal rc oscillator, this would mean the output would be incorrect, right? How could one prove this?

I guess you could have a look at how the RTC is drifting when selecting the RC osc as the parent but it will anyway be way less precise than the crystal so i'm not sure how you could get a conclusive result.

Quoted 69 lines

Greets
Alex

Quoted 65 lines
Quoted 60 lines

/sys/kernel/debug/clk/clk_summary content excerpt before:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 4 4 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 0 0 0 32768 0 0 50000 Y deviceless no_connection_id

And after:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 2 2 0 32768 0 0 50000 Y fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 2 2 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
deviceless no_connection_id

 arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/microchip/sam9x60.dtsi +2 -2
index 291540e5d81e..d077afd5024d 100644
@@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
 				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 				reg = <0xfffffe20 0x20>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			pit: timer@fffffe40 {
@@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
 				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
 				reg = <0xfffffea8 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			watchdog: watchdog@ffffff80 {

base-commit: 47ac09b91befbb6a235ab620c32af719f8208399

Signature · 1 line
2.39.2
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#5 lore raw

Re: [PATCH v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks

Hello Alexandre,

Am Thu, Aug 22, 2024 at 10:17:46AM +0200 schrieb Alexandre Belloni:

Quoted 46 lines · Alexander Dahl
Quoted 45 lines

Hello Alexandre,

Am Thu, Aug 22, 2024 at 01:52:05AM +0200 schrieb Alexandre Belloni:

Quoted 17 lines · Alexander Dahl
Quoted 16 lines

The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator.

(The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes.)

Fixes 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")

---

Notes:
Picked the wrong patch in the first try. This v2 one has a slightly adapted commit message and more context below.

Quoted 7 lines
Quoted 3 lines

This obviously requires a 32.768 kHz crystal oscillator to be present, but the sam9x60.dtsi does contain that, and the clock-controllers reference that, so I assume it's always present.

The crystal is optional so this is going to break the boards that don't have one. I don't really mind but this should probably be part of the commit message.

Okay right, according to the datasheet (Figure 27.1 SCKC Block Diagram) you don't need that crystal, you can clear TD_OSCSEL and td_slck runs from the internal rc then. However, td_slck is always present, it either sources from the internal slow rc oscillator or the crystal oscillator. And the datasheet says in section 29.1 (PMC):

"The Slow Clock Controller (SCKC) selects the source of TD_SLCK (drives the real-time part (RTT/RTC)). The source of MD_SLCK (drives the rest of the system controller: wake-up logic, watchdog, PMC, etc.) is always the slow RC oscillator."

md_slck and td_slck are both registered by the at91 sckc driver, and the td_slck gets two parents in of_sam9x60_sckc_setup() when registered by at91_clk_register_sam9x5_slow(). The parent can be switched by clk_sam9x5_slow_set_parent() from sam9x5_slow_ops then, correctly setting the OSCSEL bit.

Quoted 8 lines
Quoted 4 lines

The whole idea of the patch is giving the rtc/rtt td_slck as a parent as documented in the datasheet. I don't see how this should be affected by the parents of td_slck? Am I missing something?

You are right, I got confused because you were referring t the 32768 Hz crystal in your commit message and though you aimed at selected the parent of td_slck (and also, I didn't really work on the sam9x60).

Thanks for confirming.

Should I reword the commit message then to make it easier to understand?

Quoted 11 lines
Quoted 6 lines
Quoted 3 lines

This makes me realise that we always assumed the RC oscillator was running at 32768 while the sam9x60 datasheet refers to it has a 32kHz oscillator. However the RTC only has a 32768 divider...

When sourced from the internal rc oscillator, this would mean the output would be incorrect, right? How could one prove this?

I guess you could have a look at how the RTC is drifting when selecting the RC osc as the parent but it will anyway be way less precise than the crystal so i'm not sure how you could get a conclusive result.

I would have to look deeper into rtc for that.
Maybe in a calm minute. ;-)

Greets
Alex

Quoted 76 lines
Quoted 70 lines

Greets
Alex

Quoted 65 lines
Quoted 60 lines

/sys/kernel/debug/clk/clk_summary content excerpt before:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 4 4 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 0 0 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 0 0 0 32768 0 0 50000 Y deviceless no_connection_id

And after:

slow_rc_osc 1 1 0 32768 93750000 0 50000 Y deviceless no_connection_id
md_slck 2 2 0 32768 0 0 50000 Y fffffe10.poweroff no_connection_id
fffffe00.reset-controller no_connection_id
timer@f8008000 slow_clk
deviceless no_connection_id
…
slow_xtal 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
slow_osc 1 1 0 32768 0 0 50000 Y deviceless no_connection_id
td_slck 2 2 0 32768 0 0 50000 Y fffffea8.rtc no_connection_id
fffffe20.rtc no_connection_id
deviceless no_connection_id

 arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/microchip/sam9x60.dtsi +2 -2
index 291540e5d81e..d077afd5024d 100644
@@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
 				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 				reg = <0xfffffe20 0x20>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			pit: timer@fffffe40 {
@@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
 				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
 				reg = <0xfffffea8 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			watchdog: watchdog@ffffff80 {

base-commit: 47ac09b91befbb6a235ab620c32af719f8208399

Signature · 1 line
2.39.2
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
maintainer Applied
#6 lore raw

Re: [PATCH v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks

In reply to Alexander Dahl
Quoted 10 lines · Alexander Dahl

The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator.

(The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes.)

Fixes 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")

Applied to at91-dt, thanks!