add some node for amlogic c3
Subsystems (4)
v3 cover add some node for amlogic c3
Add some node for board AW409 and support board C308l AW419.
---
Changes in v3:
- Change clkc_periphs node to the first.
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Delete unused sdio node in board level dts.
- Add the description of modifying the binding in commit msg.
- Add the reason why some node property fileds place at board level in commit msg.
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Xianwei Zhao (3):
dt-bindings: clock: fix C3 PLL input parameter
arm64: dts: amlogic: add some device nodes for C3
arm64: dts: amlogic: add C3 AW419 board
.../bindings/clock/amlogic,c3-pll-clkc.yaml | 7 +- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/amlogic-c3-c302x-aw409.dts | 233 ++++++++++ .../boot/dts/amlogic/amlogic-c3-c308l-aw419.dts | 262 +++++++++++ arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 488 ++++++++++++++++++++- 5 files changed, 988 insertions(+), 3 deletions(-)
---
base-commit: 7a5d2ce79d1fc8535a6f10e51011ae9671bd86e8
change-id: 20240806-c3_add_node-420a37918f18
Best regards,
Signature · 1 line
Xianwei Zhao <[email protected]>
PATCH v3 1/3 dt-bindings: clock: fix C3 PLL input parameter
Add C3 PLL controller input clock parameters "fix".
The clock named "fix" was initially implemented in PLL clock controller driver. However, some registers required secure zone access, so we moved it to the secure zone (BL31) and accessed it through SCMI. Since the PLL clock driver needs to use this clock, the "fix" clock is used as an input source. We updated the driver but forgot to modify the binding accordingly, so we are adding it here.
It is an ABI break but on a new and immature platform. Noboby could really use that platform at this stage, so nothing is going to break on anyone really.
--- Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml +5 -2
@@ -24,11 +24,13 @@ properties: items: - description: input top pll - description: input mclk pll + - description: input fix pll clock-names: items: - const: top - const: mclk + - const: fix "#clock-cells": const: 1
@@ -52,8 +54,9 @@ examples: compatible = "amlogic,c3-pll-clkc"; reg = <0x0 0x8000 0x0 0x1a4>; clocks = <&scmi_clk 2>, - <&scmi_clk 5>; - clock-names = "top", "mclk"; + <&scmi_clk 5>, + <&scmi_clk 12>; + clock-names = "top", "mclk", "fix"; #clock-cells = <1>; }; };
Signature · 1 line
2.37.1
Re: [PATCH v3 1/3] dt-bindings: clock: fix C3 PLL input parameter
Quoted 7 lines · Xianwei Zhao
Add C3 PLL controller input clock parameters "fix".
The clock named "fix" was initially implemented in PLL clock controller driver. However, some registers required secure zone access, so we moved it to the secure zone (BL31) and accessed it through SCMI. Since the PLL clock driver needs to use this clock, the "fix" clock is used as an input source. We updated the driver but forgot to modify the binding accordingly,
Please wrap commit message according to Linux coding style / submission process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597
Best regards,
Krzysztof
Re: [PATCH v3 1/3] dt-bindings: clock: fix C3 PLL input parameter
Hi Krzysztof,
Thanks for your reply.
Quoted 11 lines · Krzysztof Kozlowski
[ EXTERNAL EMAIL ]
Quoted 7 lines · Xianwei Zhao
Add C3 PLL controller input clock parameters "fix".
The clock named "fix" was initially implemented in PLL clock controller driver. However, some registers required secure zone access, so we moved it to the secure zone (BL31) and accessed it through SCMI. Since the PLL clock driver needs to use this clock, the "fix" clock is used as an input source. We updated the driver but forgot to modify the binding accordingly,
Quoted 4 lines
Please wrap commit message according to Linux coding style / submission process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597
Will do.
Quoted 3 lines
Best regards,
Krzysztof
PATCH v3 2/3 arm64: dts: amlogic: add some device nodes for C3
In reply to Xianwei ZhaoAdd some device nodes for SoC C3, including periphs clock controller node, PLL clock controller node, SPICC node, regulator node, NAND controller node, sdcard node, Ethernet MAC and PHY node.
The sdacrd depends on regulator and pinctrl(select), so some property fields are placed at the board level. The nand chip is placed on the board, So some property fields about SPIFC and NAND controller node are placed at the board level. THe Ethernet MAC support outchip PHY, so place this property field(select PHY) at the board level.
--- .../boot/dts/amlogic/amlogic-c3-c302x-aw409.dts | 233 ++++++++++ arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 488 ++++++++++++++++++++- 2 files changed, 720 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts +233 -0
@@ -16,14 +16,247 @@ / { aliases { serial0 = &uart_b; + spi0 = &spifc; }; memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x10000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 9 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@7f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x07f00000 0x0 0x900000>; + no-map; + }; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddq: regulator-vddq { + compatible = "regulator-fixed"; + regulator-name = "VDDQ"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + ddr4_2v5: regulator-ddr4-2v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR4_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD1V8_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vddio_b: regulator-vddio-3v3-b { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + sdcard: regulator-sdcard { + compatible = "regulator-fixed"; + regulator-name = "SDCARD_POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; }; &uart_b { status = "okay"; }; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&spifc { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <83000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "system"; + reg = <0x600000 0xa00000>; + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x1000000 0x3000000>; + }; + + partition@4000000 { + label = "data"; + reg = <0x4000000 0x8000000>; + }; + }; + }; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default","clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdcard>; + vqmmc-supply = <&sdcard>; +};
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +487 -1
530 lines not on this page · raw message
Signature · 1 line
2.37.1
PATCH v3 3/3 arm64: dts: amlogic: add C3 AW419 board
In reply to Xianwei ZhaoAdd Amlogic C3 C308L AW419 board. The corresponding binding has been applied, therefore, this series does not need to add a binding corresponding to the AW419 board.
--- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/amlogic-c3-c308l-aw419.dts | 262 +++++++++++++++++++++ 2 files changed, 263 insertions(+)
arch/arm64/boot/dts/amlogic/Makefile +1 -0
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts new file +262 -0
262 lines not on this page · raw message
Signature · 1 line
2.37.1