Skip to contentSkip to conversation

flow_dissector: Dissect UDP encapsulation protocols

PATCH In review Tom Herbert 2 participants 15 messages Aug 23, 2024 – Aug 24, 2024

Subsystems (11)
lore
Share & tools
lore
#0 lore raw

v4 cover flow_dissector: Dissect UDP encapsulation protocols

Add support in flow_dissector for dissecting into UDP encapsulations like VXLAN. __skb_flow_dissect_udp is called for IPPROTO_UDP. The flag FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS enables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to __skb_flow_dissect_udp so that it can perform the socket lookup. If a socket is found and it's for a UDP encapsulation (encap_type is set in the UDP socket) then a switch is performed on the encap_type value (cases are UDP_ENCAP_* values)

Changes in the patch set:

- Unconstantify struct net argument in flowdis functions so we can call UDP socket lookup functions
- Dissect ETH_P_TEB in main flow dissector loop, move ETH_P_TEB check out of __skb_flow_dissect_gre and process it in main loop
- Add UDP_ENCAP constants for tipc, fou, gue, sctp, rxe, pfcp, wireguard, bareudp, vxlan, vxlan_gpe, geneve, and amt
- For the various UDP encapsulation protocols, Instead of just setting UDP tunnel encap type to 1, set it to the corresponding UDP_ENCAP constant. This allows identify the encapsulation protocol for a UDP socket by the encap_type
- Add function __skb_flow_dissect_udp in flow_dissector and call it for UDP packets. If a UDP encapsulation is present then the function returns either FLOW_DISSECT_RET_PROTO_AGAIN or FLOW_DISSECT_RET_IPPROTO_AGAIN
- Add flag FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS that indicates UDP encapsulations should be dissected
- Add __skb_flow_dissect_vxlan which is called when encap_type is UDP_ENCAP_VXLAN or UDP_ENCAP_VXLAN_GPE. Dissect VXLAN and return a next protocol and offset
- Add __skb_flow_dissect_fou which is called when encap_type is UDP_ENCAP_FOU. Dissect FOU and return a next protocol and offset
- Add support for ESP, L2TP, and SCTP in UDP in __skb_flow_dissect_udp. All we need to do is return FLOW_DISSECT_RET_IPPROTO_AGAIN and the corresponding IP protocol number
- Add __skb_flow_dissect_geneve which is called when encap_type is UDP_ENCAP_GENEVE. Dissect geneve and return a next protocol and offset
- Add __skb_flow_dissect_gue which is called when encap_type is UDP_ENCAP_GUE. Dissect gue and return a next protocol and offset
- Add __skb_flow_dissect_gtp which is called when encap_type is UDP_ENCAP_GTP. Dissect gtp and return a next protocol and offset

Tested: Verified fou, gue, vxlan, and geneve are properly dissected for IPv4 and IPv6 cases. This includes testing ETH_P_TEB case

v2:
- Add #if IS_ENABLED(CONFIG_IPV6) around IPv6 cases when dissecting UDP. Also, c all ipv6_bpf_stub->udp6_lib_lookup instead of udp6_lib_lookup directly since udp6_lib_lookup in the IPv6 module
- Drop patch to unconstantify struct net argument in flowdis functions, edumazet added const to ne argument in UDP socket lookup functions
- As support in flowdis ipproto switch for no-next-hdr. Just exit flowdis on good result when this is seen
- Merge patches that move TEB processing out of GRE and moved into main protocol switch
- Rename bpoff in UDP flow dissector functions to be base_nhoff for clarity
- Parse GTPv1 extension headers (part of this is moving gtp_parse_exthdrs to a header file
- Exit flowdis on good result if NPDU or SEQ GTPv1 flags are set

v3:
- Add udp6_lib_lookup to ipv6_stubs
- Call ipv6_stubs->udp6_lib_lookup instead of ipv6_bpf_stubs variant
- Use _HF_ variants of VLXAN flags (those in nbo)
- Use encap type from socket to determine if a packet is VXLAN-GPE instead of getting this from flags
- Protect both IPv4 and IPv6 cases with #ifdef CONFIG_INET
- Added a comment why UDP_ENCAP constants are in uapi
- Added a comment in ETH_P_TEB case why NET_IP_ALIGN is needed
- Add a check in __skb_flow_dissect_udp that the netns for the skb device is the same as the caller's netns, and also only dissect UDP is we haven't yet encountered any encapsulation. The goal is to ensure that the socket lookup is being done in the right netns. Encapsulations may push packets into different name spaces, so this scheme is restricting UDP dieesction to cases where there are not name spaces or at least the original name space. This should capture the majority of use cases for UDP encaps, if we do encounter a UDP encapsulation within a different namespace then the only effect is we don't attempt UDP dissection

v4:
- Fix undefined variables when CONFIG_INET is no set

Tom Herbert (13):
ipv6: Add udp6_lib_lookup to IPv6 stubs
flow_dissector: Parse ETH_P_TEB and move out of GRE
udp_encaps: Add new UDP_ENCAP constants
udp_encaps: Set proper UDP_ENCAP types in tunnel setup
flow_dissector: UDP encap infrastructure
flow_dissector: Parse vxlan in UDP
flow_dissector: Parse foo-over-udp (FOU)
flow_dissector: Parse ESP, L2TP, and SCTP in UDP
flow_dissector: Parse Geneve in UDP
flow_dissector: Parse GUE in UDP
gtp: Move gtp_parse_exthdrs into net/gtp.h
flow_dissector: Parse gtp in UDP
flow_dissector: Add case in ipproto switch for NEXTHDR_NONE

 drivers/infiniband/sw/rxe/rxe_net.c |   2 +-
 drivers/net/amt.c                   |   2 +-
 drivers/net/bareudp.c               |   2 +-
 drivers/net/geneve.c                |   2 +-
 drivers/net/gtp.c                   |  37 ---
 drivers/net/pfcp.c                  |   2 +-
 drivers/net/vxlan/vxlan_core.c      |   3 +-
 drivers/net/wireguard/socket.c      |   2 +-
 include/net/flow_dissector.h        |   1 +
 include/net/fou.h                   |  16 +
 include/net/gtp.h                   |  38 +++
 include/net/ipv6_stubs.h            |   5 +
 include/uapi/linux/udp.h            |  19 +-
 net/core/flow_dissector.c           | 470 ++++++++++++++++++++++++++--
 net/ipv4/fou_core.c                 |  19 +-
 net/ipv6/af_inet6.c                 |   1 +
 net/sctp/protocol.c                 |   2 +-
 net/tipc/udp_media.c                |   2 +-
 18 files changed, 535 insertions(+), 90 deletions(-)
Signature · 1 line
2.34.1
#1 lore raw

PATCH v4 1/13 ipv6: Add udp6_lib_lookup to IPv6 stubs

Want to do a UDP socket lookup from flow dissector so create a stub for udp6_lib_lookup

---
 include/net/ipv6_stubs.h | 5 +++++
 net/ipv6/af_inet6.c      | 1 +
 2 files changed, 6 insertions(+)
include/net/ipv6_stubs.h +5 -0
index 8a3465c8c2c5..fc6111fe820a 100644
@@ -75,6 +75,11 @@ struct ipv6_stub {
 					    struct net_device *dev);
 	int (*ip6_xmit)(const struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6,
 			__u32 mark, struct ipv6_txoptions *opt, int tclass, u32 priority);
+	struct sock *(*udp6_lib_lookup)(const struct net *net,
+				     const struct in6_addr *saddr, __be16 sport,
+				     const struct in6_addr *daddr, __be16 dport,
+				     int dif, int sdif, struct udp_table *tbl,
+				     struct sk_buff *skb);
 };
 extern const struct ipv6_stub *ipv6_stub __read_mostly;
 
net/ipv6/af_inet6.c +1 -0
index 90d2c7e3f5e9..699f1e3efb91 100644
@@ -1061,6 +1061,7 @@ static const struct ipv6_stub ipv6_stub_impl = {
 	.ipv6_fragment = ip6_fragment,
 	.ipv6_dev_find = ipv6_dev_find,
 	.ip6_xmit = ip6_xmit,
+	.udp6_lib_lookup = __udp6_lib_lookup,
 };
 
 static const struct ipv6_bpf_stub ipv6_bpf_stub_impl = {
Signature · 1 line
2.34.1
#2 lore raw

PATCH v4 2/13 flow_dissector: Parse ETH_P_TEB and move out of GRE

In reply to Tom Herbert

ETH_P_TEB (Trans Ether Bridging) is the EtherType to carry a plain Etherent frame. Add case in skb_flow_dissect to parse packets of this type

If the GRE protocol is ETH_P_TEB then just process that as any another EtherType since it's now supported in the main loop

---
 net/core/flow_dissector.c | 71 +++++++++++++++++++++++++--------------
 1 file changed, 45 insertions(+), 26 deletions(-)
net/core/flow_dissector.c +45 -26
index 0e638a37aa09..5170676a224c 100644
@@ -654,7 +654,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
 		       struct flow_dissector_key_control *key_control,
 		       struct flow_dissector *flow_dissector,
 		       void *target_container, const void *data,
-		       __be16 *p_proto, int *p_nhoff, int *p_hlen,
+		       __be16 *p_proto, int *p_nhoff, int hlen,
 		       unsigned int flags)
 {
 	struct flow_dissector_key_keyid *key_keyid;
@@ -663,7 +663,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
 	u16 gre_ver;
 
 	hdr = __skb_header_pointer(skb, *p_nhoff, sizeof(_hdr),
-				   data, *p_hlen, &_hdr);
+				   data, hlen, &_hdr);
 	if (!hdr)
 		return FLOW_DISSECT_RET_OUT_BAD;
 
@@ -695,7 +695,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
 
 		keyid = __skb_header_pointer(skb, *p_nhoff + offset,
 					     sizeof(_keyid),
-					     data, *p_hlen, &_keyid);
+					     data, hlen, &_keyid);
 		if (!keyid)
 			return FLOW_DISSECT_RET_OUT_BAD;
 
@@ -715,27 +715,11 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
 	if (hdr->flags & GRE_SEQ)
 		offset += sizeof_field(struct pptp_gre_header, seq);
 
-	if (gre_ver == 0) {
-		if (*p_proto == htons(ETH_P_TEB)) {
-			const struct ethhdr *eth;
-			struct ethhdr _eth;
-
-			eth = __skb_header_pointer(skb, *p_nhoff + offset,
-						   sizeof(_eth),
-						   data, *p_hlen, &_eth);
-			if (!eth)
-				return FLOW_DISSECT_RET_OUT_BAD;
-			*p_proto = eth->h_proto;
-			offset += sizeof(*eth);
-
-			/* Cap headers that we access via pointers at the
-			 * end of the Ethernet header as our maximum alignment
-			 * at that point is only 2 bytes.
-			 */
-			if (NET_IP_ALIGN)
-				*p_hlen = *p_nhoff + offset;
-		}
-	} else { /* version 1, must be PPTP */
+	/* For GRE version 0 p_proto is already correctly set (including if
+	 * it is ETH_P_TEB)
+	 */
+
+	if (gre_ver == 1) { /* Version 1 is PPP */
 		u8 _ppp_hdr[PPP_HDRLEN];
 		u8 *ppp_hdr;
 
@@ -744,7 +728,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
 
 		ppp_hdr = __skb_header_pointer(skb, *p_nhoff + offset,
 					       sizeof(_ppp_hdr),
-					       data, *p_hlen, _ppp_hdr);
+					       data, hlen, _ppp_hdr);
 		if (!ppp_hdr)
 			return FLOW_DISSECT_RET_OUT_BAD;
 
@@ -1284,6 +1268,41 @@ bool __skb_flow_dissect(const struct net *net,
 
 		break;
 	}
+	case htons(ETH_P_TEB): {
+		const struct ethhdr *eth;
+		struct ethhdr _eth;
+
+		eth = __skb_header_pointer(skb, nhoff, sizeof(_eth),
+					   data, hlen, &_eth);
+		if (!eth)
+			goto out_bad;
+
+		proto = eth->h_proto;
+		nhoff += sizeof(*eth);
+
+		/* Cap headers that we access via pointers at the end of the
+		 * Ethernet header as our maximum alignment at that point is
+		 * only 2 bytes.
+		 *
+		 * For the real Ethernet header the receive skbuf is offset by
+		 * two so that device places the packet such that the Ethernet
+		 * payload, i.e. IP header, is aligned to four bytes (14+2=16
+		 * which will be offset of IP header). When a packet contains
+		 * an encapsulated Ethernet header, the offset of the header is
+		 * aligned to four bytes which means the payload of that
+		 * Ethernet header, i.e. an encapsulated IP header, is not four
+		 * byte aligned and neither are any subsequent headers (TCP,
+		 * UDP, etc.). On some architectures, performing unaligned
+		 * loads is expensive compared to aligned loads, so hlen is
+		 * being capped here to avoid having flow dissector do unaligned
+		 * loads on unaligned headers after the Ethernet header.
+		 */
+		if (NET_IP_ALIGN)
+			hlen = nhoff;
+
+		fdret = FLOW_DISSECT_RET_PROTO_AGAIN;
+		break;
+	}
 	case htons(ETH_P_8021AD):
 	case htons(ETH_P_8021Q): {
 		const struct vlan_hdr *vlan = NULL;
@@ -1531,7 +1550,7 @@ bool __skb_flow_dissect(const struct net *net,
 
 		fdret = __skb_flow_dissect_gre(skb, key_control, flow_dissector,
 					       target_container, data,
-					       &proto, &nhoff, &hlen, flags);
+					       &proto, &nhoff, hlen, flags);
 		break;
 
 	case NEXTHDR_HOP:
Signature · 1 line
2.34.1
#3 lore raw

PATCH v4 3/13 udp_encaps: Add new UDP_ENCAP constants

In reply to Tom Herbert

Add constants for various UDP encapsulations that are supported

---
 include/uapi/linux/udp.h | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
include/uapi/linux/udp.h +18 -1
index 1a0fe8b151fb..bf15c4ded3e8 100644
@@ -35,7 +35,12 @@ struct udphdr {
 #define UDP_SEGMENT	103	/* Set GSO segmentation size */
 #define UDP_GRO		104	/* This socket can receive UDP GRO packets */
 
-/* UDP encapsulation types */
+/* UDP encapsulation types
+ *
+ * Note that these are defined in UAPI since we may need to use them externally,
+ * for instance by eBPF
+ */
+#define UDP_ENCAP_NONE		0
 #define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* unused  draft-ietf-ipsec-nat-t-ike-00/01 */
 #define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
 #define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
@@ -43,5 +48,17 @@ struct udphdr {
 #define UDP_ENCAP_GTP1U		5 /* 3GPP TS 29.060 */
 #define UDP_ENCAP_RXRPC		6
 #define TCP_ENCAP_ESPINTCP	7 /* Yikes, this is really xfrm encap types. */
+#define UDP_ENCAP_TIPC		8
+#define UDP_ENCAP_FOU		9
+#define UDP_ENCAP_GUE		10
+#define UDP_ENCAP_SCTP		11
+#define UDP_ENCAP_RXE		12
+#define UDP_ENCAP_PFCP		13
+#define UDP_ENCAP_WIREGUARD	14
+#define UDP_ENCAP_BAREUDP	15
+#define UDP_ENCAP_VXLAN		16
+#define UDP_ENCAP_VXLAN_GPE	17
+#define UDP_ENCAP_GENEVE	18
+#define UDP_ENCAP_AMT		19
 
 #endif /* _UAPI_LINUX_UDP_H */
Signature · 1 line
2.34.1
#4 lore raw

PATCH v4 4/13 udp_encaps: Set proper UDP_ENCAP types in tunnel setup

In reply to Tom Herbert

Instead of just setting UDP tunnel config encap_type to 1, use the appropriate constat for the tunnel type. This value can be used to determine the encapsulated protocol in UDP by looking at the socket

---
 drivers/infiniband/sw/rxe/rxe_net.c | 2 +-
 drivers/net/amt.c                   | 2 +-
 drivers/net/bareudp.c               | 2 +-
 drivers/net/geneve.c                | 2 +-
 drivers/net/pfcp.c                  | 2 +-
 drivers/net/vxlan/vxlan_core.c      | 3 ++-
 drivers/net/wireguard/socket.c      | 2 +-
 net/ipv4/fou_core.c                 | 3 ++-
 net/sctp/protocol.c                 | 2 +-
 net/tipc/udp_media.c                | 2 +-
 10 files changed, 12 insertions(+), 10 deletions(-)
drivers/infiniband/sw/rxe/rxe_net.c +1 -1
index 75d1407db52d..1c2bb88132c5 100644
@@ -193,7 +193,7 @@ static struct socket *rxe_setup_udp_tunnel(struct net *net, __be16 port,
 	if (err < 0)
 		return ERR_PTR(err);
 
-	tnl_cfg.encap_type = 1;
+	tnl_cfg.encap_type = UDP_ENCAP_RXE;
 	tnl_cfg.encap_rcv = rxe_udp_encap_recv;
 
 	/* Setup UDP tunnel */
drivers/net/amt.c +1 -1
index 6d15ab3bfbbc..fc421cf2c032 100644
@@ -2970,7 +2970,7 @@ static int amt_socket_create(struct amt_dev *amt)
 	/* Mark socket as an encapsulation socket */
 	memset(&tunnel_cfg, 0, sizeof(tunnel_cfg));
 	tunnel_cfg.sk_user_data = amt;
-	tunnel_cfg.encap_type = 1;
+	tunnel_cfg.encap_type = UDP_ENCAP_AMT;
 	tunnel_cfg.encap_rcv = amt_rcv;
 	tunnel_cfg.encap_err_lookup = amt_err_lookup;
 	tunnel_cfg.encap_destroy = NULL;
drivers/net/bareudp.c +1 -1
index d5c56ca91b77..007fb8c5168b 100644
@@ -248,7 +248,7 @@ static int bareudp_socket_create(struct bareudp_dev *bareudp, __be16 port)
 	/* Mark socket as an encapsulation socket */
 	memset(&tunnel_cfg, 0, sizeof(tunnel_cfg));
 	tunnel_cfg.sk_user_data = bareudp;
-	tunnel_cfg.encap_type = 1;
+	tunnel_cfg.encap_type = UDP_ENCAP_BAREUDP;
 	tunnel_cfg.encap_rcv = bareudp_udp_encap_recv;
 	tunnel_cfg.encap_err_lookup = bareudp_err_lookup;
 	tunnel_cfg.encap_destroy = NULL;
drivers/net/geneve.c +1 -1
index 838e85ddec67..923c573b6e5c 100644
@@ -611,7 +611,7 @@ static struct geneve_sock *geneve_socket_create(struct net *net, __be16 port,
 	/* Mark socket as an encapsulation socket */
 	memset(&tunnel_cfg, 0, sizeof(tunnel_cfg));
 	tunnel_cfg.sk_user_data = gs;
-	tunnel_cfg.encap_type = 1;
+	tunnel_cfg.encap_type = UDP_ENCAP_GENEVE;
 	tunnel_cfg.gro_receive = geneve_gro_receive;
 	tunnel_cfg.gro_complete = geneve_gro_complete;
 	tunnel_cfg.encap_rcv = geneve_udp_encap_recv;
drivers/net/pfcp.c +1 -1
index 69434fd13f96..c7e4fa606b16 100644
@@ -170,7 +170,7 @@ static struct socket *pfcp_create_sock(struct pfcp_dev *pfcp)
 
 	tuncfg.sk_user_data = pfcp;
 	tuncfg.encap_rcv = pfcp_encap_recv;
-	tuncfg.encap_type = 1;
+	tuncfg.encap_type = UDP_ENCAP_PFCP;
 
 	setup_udp_tunnel_sock(net, sock, &tuncfg);
 
drivers/net/vxlan/vxlan_core.c +2 -1
index 8983e75e9881..e02cbc018b8c 100644
@@ -3572,7 +3572,8 @@ static struct vxlan_sock *vxlan_socket_create(struct net *net, bool ipv6,
 	/* Mark socket as an encapsulation socket. */
 	memset(&tunnel_cfg, 0, sizeof(tunnel_cfg));
 	tunnel_cfg.sk_user_data = vs;
-	tunnel_cfg.encap_type = 1;
+	tunnel_cfg.encap_type = vs->flags & VXLAN_F_GPE ?
+			UDP_ENCAP_VXLAN_GPE : UDP_ENCAP_VXLAN;
 	tunnel_cfg.encap_rcv = vxlan_rcv;
 	tunnel_cfg.encap_err_lookup = vxlan_err_lookup;
 	tunnel_cfg.encap_destroy = NULL;
drivers/net/wireguard/socket.c +1 -1
index 0414d7a6ce74..f4b5bd14fd56 100644
@@ -352,7 +352,7 @@ int wg_socket_init(struct wg_device *wg, u16 port)
 	int ret;
 	struct udp_tunnel_sock_cfg cfg = {
 		.sk_user_data = wg,
-		.encap_type = 1,
+		.encap_type = UDP_ENCAP_WIREGUARD,
 		.encap_rcv = wg_receive
 	};
 	struct socket *new4 = NULL, *new6 = NULL;
net/ipv4/fou_core.c +2 -1
index 0abbc413e0fe..8241f762e45b 100644
@@ -578,19 +578,20 @@ static int fou_create(struct net *net, struct fou_cfg *cfg,
 	fou->sock = sock;
 
 	memset(&tunnel_cfg, 0, sizeof(tunnel_cfg));
-	tunnel_cfg.encap_type = 1;
 	tunnel_cfg.sk_user_data = fou;
 	tunnel_cfg.encap_destroy = NULL;
 
 	/* Initial for fou type */
 	switch (cfg->type) {
 	case FOU_ENCAP_DIRECT:
+		tunnel_cfg.encap_type = UDP_ENCAP_FOU;
 		tunnel_cfg.encap_rcv = fou_udp_recv;
 		tunnel_cfg.gro_receive = fou_gro_receive;
 		tunnel_cfg.gro_complete = fou_gro_complete;
 		fou->protocol = cfg->protocol;
 		break;
 	case FOU_ENCAP_GUE:
+		tunnel_cfg.encap_type = UDP_ENCAP_GUE;
 		tunnel_cfg.encap_rcv = gue_udp_recv;
 		tunnel_cfg.gro_receive = gue_gro_receive;
 		tunnel_cfg.gro_complete = gue_gro_complete;
net/sctp/protocol.c +1 -1
index 5a7436a13b74..290ebcf17a48 100644
@@ -876,7 +876,7 @@ int sctp_udp_sock_start(struct net *net)
 		return err;
 	}
 
-	tuncfg.encap_type = 1;
+	tuncfg.encap_type = UDP_ENCAP_SCTP;
 	tuncfg.encap_rcv = sctp_udp_rcv;
 	tuncfg.encap_err_lookup = sctp_udp_v4_err;
 	setup_udp_tunnel_sock(net, sock, &tuncfg);
net/tipc/udp_media.c +1 -1
index 439f75539977..3c081b7b9d67 100644
@@ -771,7 +771,7 @@ static int tipc_udp_enable(struct net *net, struct tipc_bearer *b,
 	if (err)
 		goto err;
 	tuncfg.sk_user_data = ub;
-	tuncfg.encap_type = 1;
+	tuncfg.encap_type = UDP_ENCAP_TIPC;
 	tuncfg.encap_rcv = tipc_udp_recv;
 	tuncfg.encap_destroy = NULL;
 	setup_udp_tunnel_sock(net, ub->ubsock, &tuncfg);
Signature · 1 line
2.34.1
#5 lore raw

PATCH v4 5/13 flow_dissector: UDP encap infrastructure

In reply to Tom Herbert

Add infrastructure for parsing into UDP encapsulations

Add function __skb_flow_dissect_udp that is called for IPPROTO_UDP. The flag FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS enables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to __skb_flow_dissect_udp so that it can perform the socket lookup

If a socket is found and it's for a UDP encapsulation (encap_type is set in the UDP socket) then a switch is performed on the encap_type value (cases are UDP_ENCAP_* values)

An encapsulated packet in UDP can either be indicated by an EtherType or IP protocol. The processing for dissecting a UDP encap protocol returns a flow dissector return code. If FLOW_DISSECT_RET_PROTO_AGAIN or FLOW_DISSECT_RET_IPPROTO_AGAIN is returned then the corresponding encapsulated protocol is dissected. The nhoff is set to point to the header to process. In the case FLOW_DISSECT_RET_PROTO_AGAIN the EtherType protocol is returned and the IP protocol is set to zero. In the case of FLOW_DISSECT_RET_IPPROTO_AGAIN, the IP protocol is returned and the EtherType protocol is returned unchanged

---
 include/net/flow_dissector.h |   1 +
 net/core/flow_dissector.c    | 138 +++++++++++++++++++++++++++++++++++
 2 files changed, 139 insertions(+)
include/net/flow_dissector.h +1 -0
index ced79dc8e856..8a868a88a6f1 100644
@@ -384,6 +384,7 @@ enum flow_dissector_key_id {
 #define FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL	BIT(1)
 #define FLOW_DISSECTOR_F_STOP_AT_ENCAP		BIT(2)
 #define FLOW_DISSECTOR_F_STOP_BEFORE_ENCAP	BIT(3)
+#define FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS	BIT(4)
 
 struct flow_dissector_key {
 	enum flow_dissector_key_id key_id;
net/core/flow_dissector.c +138 -0

168 lines not on this page · raw message

Signature · 1 line
2.34.1
reviewer
#6 lore raw

Re: [PATCH net-next v4 05/13] flow_dissector: UDP encap infrastructure

Quoted 25 lines · Tom Herbert

Add infrastructure for parsing into UDP encapsulations

Add function __skb_flow_dissect_udp that is called for IPPROTO_UDP. The flag FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS enables parsing of UDP encapsulations. If the flag is set when parsing a UDP packet then a socket lookup is performed. The offset of the base network header, either an IPv4 or IPv6 header, is tracked and passed to __skb_flow_dissect_udp so that it can perform the socket lookup

If a socket is found and it's for a UDP encapsulation (encap_type is set in the UDP socket) then a switch is performed on the encap_type value (cases are UDP_ENCAP_* values)

An encapsulated packet in UDP can either be indicated by an EtherType or IP protocol. The processing for dissecting a UDP encap protocol returns a flow dissector return code. If FLOW_DISSECT_RET_PROTO_AGAIN or FLOW_DISSECT_RET_IPPROTO_AGAIN is returned then the corresponding encapsulated protocol is dissected. The nhoff is set to point to the header to process. In the case FLOW_DISSECT_RET_PROTO_AGAIN the EtherType protocol is returned and the IP protocol is set to zero. In the case of FLOW_DISSECT_RET_IPPROTO_AGAIN, the IP protocol is returned and the EtherType protocol is returned unchanged

...

Quoted 1 line
net/core/flow_dissector.c +0 -0

...

Quoted 52 lines
net/core/flow_dissector.c +48 -0
@@ -806,6 +807,134 @@ __skb_flow_dissect_batadv(const struct sk_buff *skb,
 	return FLOW_DISSECT_RET_PROTO_AGAIN;
 }
 
+static enum flow_dissect_ret
+__skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
+		       struct flow_dissector *flow_dissector,
+		       void *target_container, const void *data,
+		       int *p_nhoff, int hlen, __be16 *p_proto,
+		       u8 *p_ip_proto, int base_nhoff, unsigned int flags,
+		       unsigned int num_hdrs)
+{
+	enum flow_dissect_ret ret;
+	struct udphdr _udph;
+	int nhoff;
+
+	if (!(flags & FLOW_DISSECTOR_F_PARSE_UDP_ENCAPS))
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	/* Check that the netns for the skb device is the same as the caller's,
+	 * and only dissect UDP if we haven't yet encountered any encapsulation.
+	 * The goal is to ensure that the socket lookup is being done in the
+	 * right netns. Encapsulations may push packets into different name
+	 * spaces, so this scheme is restricting UDP dissection to cases where
+	 * they are in the same name spaces or at least the original name space.
+	 * This should capture the majority of use cases for UDP encaps, and
+	 * if we do encounter a UDP encapsulation within a different namespace
+	 * then the only effect is we don't attempt UDP dissection
+	 */
+	if (dev_net(skb->dev) != net || num_hdrs > 0)
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	switch (*p_proto) {
+#ifdef CONFIG_INET
+	case htons(ETH_P_IP): {
+		const struct udphdr *udph;
+		const struct iphdr *iph;
+		struct iphdr _iph;
+		struct sock *sk;
+
+		iph = __skb_header_pointer(skb, base_nhoff, sizeof(_iph), data,
+					   hlen, &_iph);
+		if (!iph)
+			return FLOW_DISSECT_RET_OUT_BAD;
+
+		udph = __skb_header_pointer(skb, *p_nhoff, sizeof(_udph), data,
+					    hlen, &_udph);
+		if (!udph)
+			return FLOW_DISSECT_RET_OUT_BAD;
+
+		rcu_read_lock();
+		/* Look up the UDPv4 socket and get the encap_type */

net/core/flow_dissector.c __skb_flow_dissect_batadv(const struct sk_buff *skb, · line 867

Quoted 10 lines
net/core/flow_dissector.c +10 -0
+		sk = __udp4_lib_lookup(net, iph->saddr, udph->source,
+				       iph->daddr, udph->dest,
+				       inet_iif(skb), inet_sdif(skb),
+				       net->ipv4.udp_table, NULL);
+		if (!sk || !udp_sk(sk)->encap_type) {
+			rcu_read_unlock();
+			return FLOW_DISSECT_RET_OUT_GOOD;
+		}
+
+		encap_type = udp_sk(sk)->encap_type;

Hi Tom,

I guess a local change went astray, or something like that, because encap_type isn't declared in this scope.

Quoted 4 lines
net/core/flow_dissector.c +4 -0
+		rcu_read_unlock();
+
+		break;
+	}

...

Signature · 1 line
pw-bot: cr
#7 lore raw

PATCH v4 6/13 flow_dissector: Parse vxlan in UDP

In reply to Tom Herbert

Parse vxlan in a UDP encapsulation

---
 net/core/flow_dissector.c | 47 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
net/core/flow_dissector.c +47 -0
index f3134804a1db..49feea3fec56 100644
@@ -13,7 +13,9 @@
 #include <net/gre.h>
 #include <net/pptp.h>
 #include <net/tipc.h>
+#include <net/tun_proto.h>
 #include <net/udp.h>
+#include <net/vxlan.h>
 #include <linux/igmp.h>
 #include <linux/icmp.h>
 #include <linux/sctp.h>
@@ -756,6 +758,44 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
 	return FLOW_DISSECT_RET_PROTO_AGAIN;
 }
 
+static enum flow_dissect_ret
+__skb_flow_dissect_vxlan(const struct sk_buff *skb,
+			 struct flow_dissector *flow_dissector,
+			 void *target_container, const void *data,
+			 __be16 *p_proto, int *p_nhoff, int hlen,
+			 unsigned int flags, bool is_gpe)
+{
+	struct vxlanhdr *hdr, _hdr;
+	__be16 protocol;
+
+	hdr = __skb_header_pointer(skb, *p_nhoff, sizeof(_hdr), data, hlen,
+				   &_hdr);
+	if (!hdr)
+		return FLOW_DISSECT_RET_OUT_BAD;
+
+	/* VNI flag always required to be set */
+	if (!(hdr->vx_flags & VXLAN_HF_VNI))
+		return FLOW_DISSECT_RET_OUT_BAD;
+
+	if (is_gpe) {
+		struct vxlanhdr_gpe *gpe = (struct vxlanhdr_gpe *)hdr;
+
+		if (!gpe->np_applied || gpe->version != 0 || gpe->oam_flag)
+			return FLOW_DISSECT_RET_OUT_GOOD;
+
+		protocol = tun_p_to_eth_p(gpe->next_protocol);
+		if (!protocol)
+			return FLOW_DISSECT_RET_OUT_GOOD;
+	} else {
+		protocol = htons(ETH_P_TEB);
+	}
+
+	*p_nhoff += sizeof(struct vxlanhdr);
+	*p_proto = protocol;
+
+	return FLOW_DISSECT_RET_PROTO_AGAIN;
+}
+
 /**
  * __skb_flow_dissect_batadv() - dissect batman-adv header
  * @skb: sk_buff to with the batman-adv header
@@ -917,6 +957,13 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
 	ret = FLOW_DISSECT_RET_OUT_GOOD;
 
 	switch (encap_type) {
+	case UDP_ENCAP_VXLAN:
+	case UDP_ENCAP_VXLAN_GPE:
+		ret = __skb_flow_dissect_vxlan(skb, flow_dissector,
+					       target_container, data,
+					       p_proto, &nhoff, hlen, flags,
+					       encap_type == UDP_ENCAP_VXLAN_GPE);
+		break;
 	default:
 		break;
 	}
Signature · 1 line
2.34.1
#8 lore raw

PATCH v4 7/13 flow_dissector: Parse foo-over-udp (FOU)

In reply to Tom Herbert

Parse FOU by getting the FOU protocol from the matching socket. This includes moving "struct fou" and "fou_from_sock" to fou.h

---
 include/net/fou.h         | 16 ++++++++++++++++
 net/core/flow_dissector.c | 12 ++++++++++++
 net/ipv4/fou_core.c       | 16 ----------------
 3 files changed, 28 insertions(+), 16 deletions(-)
include/net/fou.h +16 -0
index 824eb4b231fd..8574767b91b6 100644
@@ -17,6 +17,22 @@ int __fou_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e,
 int __gue_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e,
 		       u8 *protocol, __be16 *sport, int type);
 
+struct fou {
+	struct socket *sock;
+	u8 protocol;
+	u8 flags;
+	__be16 port;
+	u8 family;
+	u16 type;
+	struct list_head list;
+	struct rcu_head rcu;
+};
+
+static inline struct fou *fou_from_sock(struct sock *sk)
+{
+	return sk->sk_user_data;
+}
+
 int register_fou_bpf(void);
 
 #endif
net/core/flow_dissector.c +12 -0
index 49feea3fec56..e8760c1182b1 100644
@@ -8,6 +8,7 @@
 #include <linux/filter.h>
 #include <net/dsa.h>
 #include <net/dst_metadata.h>
+#include <net/fou.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
 #include <net/gre.h>
@@ -855,6 +856,7 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
 		       u8 *p_ip_proto, int base_nhoff, unsigned int flags,
 		       unsigned int num_hdrs)
 {
+	__u8 encap_type, fou_protocol;
 	enum flow_dissect_ret ret;
 	struct udphdr _udph;
 	int nhoff;
@@ -905,6 +907,9 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
 		}
 
 		encap_type = udp_sk(sk)->encap_type;
+		if (encap_type == UDP_ENCAP_FOU)
+			fou_protocol = fou_from_sock(sk)->protocol;
+
 		rcu_read_unlock();
 
 		break;
@@ -943,6 +948,9 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
 		}
 
 		encap_type = udp_sk(sk)->encap_type;
+		if (encap_type == UDP_ENCAP_FOU)
+			fou_protocol = fou_from_sock(sk)->protocol;
+
 		rcu_read_unlock();
 
 		break;
@@ -957,6 +965,10 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
 	ret = FLOW_DISSECT_RET_OUT_GOOD;
 
 	switch (encap_type) {
+	case UDP_ENCAP_FOU:
+		*p_ip_proto = fou_protocol;
+		ret = FLOW_DISSECT_RET_IPPROTO_AGAIN;
+		break;
 	case UDP_ENCAP_VXLAN:
 	case UDP_ENCAP_VXLAN_GPE:
 		ret = __skb_flow_dissect_vxlan(skb, flow_dissector,
net/ipv4/fou_core.c +0 -16
index 8241f762e45b..137eb80c56a2 100644
@@ -21,17 +21,6 @@
 
 #include "fou_nl.h"
 
-struct fou {
-	struct socket *sock;
-	u8 protocol;
-	u8 flags;
-	__be16 port;
-	u8 family;
-	u16 type;
-	struct list_head list;
-	struct rcu_head rcu;
-};
-
 #define FOU_F_REMCSUM_NOPARTIAL BIT(0)
 
 struct fou_cfg {
@@ -48,11 +37,6 @@ struct fou_net {
 	struct mutex fou_lock;
 };
 
-static inline struct fou *fou_from_sock(struct sock *sk)
-{
-	return sk->sk_user_data;
-}
-
 static int fou_recv_pull(struct sk_buff *skb, struct fou *fou, size_t len)
 {
 	/* Remove 'len' bytes from the packet (UDP header and
Signature · 1 line
2.34.1
#9 lore raw

PATCH v4 8/13 flow_dissector: Parse ESP, L2TP, and SCTP in UDP

In reply to Tom Herbert

These don't have an encapsulation header so it's fairly easy to support them

---
 net/core/flow_dissector.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
net/core/flow_dissector.c +13 -0
index e8760c1182b1..dd126e72f880 100644
@@ -965,10 +965,23 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
 	ret = FLOW_DISSECT_RET_OUT_GOOD;
 
 	switch (encap_type) {
+	case UDP_ENCAP_ESPINUDP_NON_IKE:
+	case UDP_ENCAP_ESPINUDP:
+		*p_ip_proto = IPPROTO_ESP;
+		ret = FLOW_DISSECT_RET_IPPROTO_AGAIN;
+		break;
+	case UDP_ENCAP_L2TPINUDP:
+		*p_ip_proto = IPPROTO_L2TP;
+		ret = FLOW_DISSECT_RET_IPPROTO_AGAIN;
+		break;
 	case UDP_ENCAP_FOU:
 		*p_ip_proto = fou_protocol;
 		ret = FLOW_DISSECT_RET_IPPROTO_AGAIN;
 		break;
+	case UDP_ENCAP_SCTP:
+		*p_ip_proto = IPPROTO_SCTP;
+		ret = FLOW_DISSECT_RET_IPPROTO_AGAIN;
+		break;
 	case UDP_ENCAP_VXLAN:
 	case UDP_ENCAP_VXLAN_GPE:
 		ret = __skb_flow_dissect_vxlan(skb, flow_dissector,
Signature · 1 line
2.34.1
#10 lore raw

PATCH v4 9/13 flow_dissector: Parse Geneve in UDP

In reply to Tom Herbert

Parse Geneve in a UDP encapsulation

---
 net/core/flow_dissector.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
net/core/flow_dissector.c +29 -0
index dd126e72f880..1deb9c3a75aa 100644
@@ -11,6 +11,7 @@
 #include <net/fou.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
+#include <net/geneve.h>
 #include <net/gre.h>
 #include <net/pptp.h>
 #include <net/tipc.h>
@@ -797,6 +798,29 @@ __skb_flow_dissect_vxlan(const struct sk_buff *skb,
 	return FLOW_DISSECT_RET_PROTO_AGAIN;
 }
 
+static enum flow_dissect_ret
+__skb_flow_dissect_geneve(const struct sk_buff *skb,
+			  struct flow_dissector *flow_dissector,
+			  void *target_container, const void *data,
+			  __be16 *p_proto, int *p_nhoff, int hlen,
+			  unsigned int flags)
+{
+	struct genevehdr *hdr, _hdr;
+
+	hdr = __skb_header_pointer(skb, *p_nhoff, sizeof(_hdr), data, hlen,
+				   &_hdr);
+	if (!hdr)
+		return FLOW_DISSECT_RET_OUT_BAD;
+
+	if (hdr->ver != 0)
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	*p_proto = hdr->proto_type;
+	*p_nhoff += sizeof(struct genevehdr) + (hdr->opt_len * 4);
+
+	return FLOW_DISSECT_RET_PROTO_AGAIN;
+}
+
 /**
  * __skb_flow_dissect_batadv() - dissect batman-adv header
  * @skb: sk_buff to with the batman-adv header
@@ -989,6 +1013,11 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
 					       p_proto, &nhoff, hlen, flags,
 					       encap_type == UDP_ENCAP_VXLAN_GPE);
 		break;
+	case UDP_ENCAP_GENEVE:
+		ret = __skb_flow_dissect_geneve(skb, flow_dissector,
+						target_container, data,
+						p_proto, &nhoff, hlen, flags);
+		break;
 	default:
 		break;
 	}
Signature · 1 line
2.34.1
#11 lore raw

PATCH v4 10/13 flow_dissector: Parse GUE in UDP

In reply to Tom Herbert

Parse both version 0 and 1 of GUE encapsulated in UDP. Add helper function __skb_direct_ip_dissect to convert an IP header to IPPROTO_IPIP or IPPROTO_IPV6 (by looking just at the version number)

---
 net/core/flow_dissector.c | 60 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)
net/core/flow_dissector.c +60 -0
index 1deb9c3a75aa..b59a9e896a31 100644
@@ -821,6 +821,61 @@ __skb_flow_dissect_geneve(const struct sk_buff *skb,
 	return FLOW_DISSECT_RET_PROTO_AGAIN;
 }
 
+static __u8
+__skb_direct_ip_dissect(void *hdr)
+{
+	/* Direct encapsulation of IPv4 or IPv6 */
+
+	switch (((struct iphdr *)hdr)->version) {
+	case 4:
+		return IPPROTO_IPIP;
+	case 6:
+		return IPPROTO_IPV6;
+	default:
+		return 0;
+	}
+}
+
+static enum flow_dissect_ret
+__skb_flow_dissect_gue(const struct sk_buff *skb,
+		       struct flow_dissector *flow_dissector,
+		       void *target_container, const void *data,
+		       __u8 *p_ip_proto, int *p_nhoff,
+		       int hlen, unsigned int flags)
+{
+	struct guehdr *hdr, _hdr;
+	__u8 proto;
+
+	hdr = __skb_header_pointer(skb, *p_nhoff, sizeof(_hdr), data, hlen,
+				   &_hdr);
+	if (!hdr)
+		return FLOW_DISSECT_RET_OUT_BAD;
+
+	switch (hdr->version) {
+	case 0:
+		if (unlikely(hdr->control))
+			return FLOW_DISSECT_RET_OUT_GOOD;
+
+		*p_nhoff += sizeof(struct guehdr) + (hdr->hlen << 2);
+		*p_ip_proto = hdr->proto_ctype;
+
+		break;
+	case 1:
+		/* Direct encapsulation of IPv4 or IPv6 */
+
+		proto = __skb_direct_ip_dissect(hdr);
+		if (proto) {
+			*p_ip_proto = proto;
+			break;
+		}
+		fallthrough;
+	default:
+		return FLOW_DISSECT_RET_OUT_GOOD;
+	}
+
+	return FLOW_DISSECT_RET_IPPROTO_AGAIN;
+}
+
 /**
  * __skb_flow_dissect_batadv() - dissect batman-adv header
  * @skb: sk_buff to with the batman-adv header
@@ -1002,6 +1057,11 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
 		*p_ip_proto = fou_protocol;
 		ret = FLOW_DISSECT_RET_IPPROTO_AGAIN;
 		break;
+	case UDP_ENCAP_GUE:
+		ret = __skb_flow_dissect_gue(skb, flow_dissector,
+					     target_container, data,
+					     p_ip_proto, p_nhoff, hlen, flags);
+		break;
 	case UDP_ENCAP_SCTP:
 		*p_ip_proto = IPPROTO_SCTP;
 		ret = FLOW_DISSECT_RET_IPPROTO_AGAIN;
Signature · 1 line
2.34.1
#12 lore raw

PATCH v4 11/13 gtp: Move gtp_parse_exthdrs into net/gtp.h

In reply to Tom Herbert

gtp_parse_exthdrs is a generic function, move into a header file so we can call it outside of the GTP driver (specifically, we can call it from flow dissector)

---
 drivers/net/gtp.c | 37 -------------------------------------
 include/net/gtp.h | 38 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+), 37 deletions(-)
drivers/net/gtp.c +0 -37
index 0696faf60013..259c7043d20c 100644
@@ -742,43 +742,6 @@ static int gtp1u_handle_echo_resp(struct gtp_dev *gtp, struct sk_buff *skb)
 				       msg, 0, GTP_GENL_MCGRP, GFP_ATOMIC);
 }
 
-static int gtp_parse_exthdrs(struct sk_buff *skb, unsigned int *hdrlen)
-{
-	struct gtp_ext_hdr *gtp_exthdr, _gtp_exthdr;
-	unsigned int offset = *hdrlen;
-	__u8 *next_type, _next_type;
-
-	/* From 29.060: "The Extension Header Length field specifies the length
-	 * of the particular Extension header in 4 octets units."
-	 *
-	 * This length field includes length field size itself (1 byte),
-	 * payload (variable length) and next type (1 byte). The extension
-	 * header is aligned to to 4 bytes.
-	 */
-
-	do {
-		gtp_exthdr = skb_header_pointer(skb, offset, sizeof(*gtp_exthdr),
-						&_gtp_exthdr);
-		if (!gtp_exthdr || !gtp_exthdr->len)
-			return -1;
-
-		offset += gtp_exthdr->len * 4;
-
-		/* From 29.060: "If no such Header follows, then the value of
-		 * the Next Extension Header Type shall be 0."
-		 */
-		next_type = skb_header_pointer(skb, offset - 1,
-					       sizeof(_next_type), &_next_type);
-		if (!next_type)
-			return -1;
-
-	} while (*next_type != 0);
-
-	*hdrlen = offset;
-
-	return 0;
-}
-
 static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb)
 {
 	unsigned int hdrlen = sizeof(struct udphdr) +
include/net/gtp.h +38 -0
index c0253c8702d0..a513aa1c7394 100644
@@ -83,4 +83,42 @@ struct gtp_ext_hdr {
 	__u8	data[];
 };
 
+static inline int gtp_parse_exthdrs(const struct sk_buff *skb,
+				    unsigned int *hdrlen)
+{
+	struct gtp_ext_hdr *gtp_exthdr, _gtp_exthdr;
+	unsigned int offset = *hdrlen;
+	__u8 *next_type, _next_type;
+
+	/* From 29.060: "The Extension Header Length field specifies the length
+	 * of the particular Extension header in 4 octets units."
+	 *
+	 * This length field includes length field size itself (1 byte),
+	 * payload (variable length) and next type (1 byte). The extension
+	 * header is aligned to 4 bytes.
+	 */
+
+	do {
+		gtp_exthdr = skb_header_pointer(skb, offset, sizeof(*gtp_exthdr),
+						&_gtp_exthdr);
+		if (!gtp_exthdr || !gtp_exthdr->len)
+			return -1;
+
+		offset += gtp_exthdr->len * 4;
+
+		/* From 29.060: "If no such Header follows, then the value of
+		 * the Next Extension Header Type shall be 0."
+		 */
+		next_type = skb_header_pointer(skb, offset - 1,
+					       sizeof(_next_type), &_next_type);
+		if (!next_type)
+			return -1;
+
+	} while (*next_type != 0);
+
+	*hdrlen = offset;
+
+	return 0;
+}
+
 #endif
Signature · 1 line
2.34.1
#13 lore raw

PATCH v4 12/13 flow_dissector: Parse gtp in UDP

In reply to Tom Herbert

Parse both version 0 and 1. Call __skb_direct_ip_dissect to determine IP version of the encapsulated packet

---
 net/core/flow_dissector.c | 97 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)
net/core/flow_dissector.c +97 -0
index b59a9e896a31..ae56de7d420a 100644
@@ -9,6 +9,7 @@
 #include <net/dsa.h>
 #include <net/dst_metadata.h>
 #include <net/fou.h>
+#include <net/gtp.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
 #include <net/geneve.h>
@@ -35,6 +36,7 @@
 #include <net/pkt_cls.h>
 #include <scsi/fc/fc_fcoe.h>
 #include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/gtp.h>
 #include <linux/bpf.h>
 #if IS_ENABLED(CONFIG_NF_CONNTRACK)
 #include <net/netfilter/nf_conntrack_core.h>
@@ -876,6 +878,91 @@ __skb_flow_dissect_gue(const struct sk_buff *skb,
 	return FLOW_DISSECT_RET_IPPROTO_AGAIN;
 }
 
+static enum flow_dissect_ret
+__skb_flow_dissect_gtp0(const struct sk_buff *skb,
+			struct flow_dissector *flow_dissector,
+			void *target_container, const void *data,
+			__u8 *p_ip_proto, int *p_nhoff, int hlen,
+			unsigned int flags)
+{
+	__u8 *ip_version, _ip_version, proto;
+	struct gtp0_header *hdr, _hdr;
+
+	hdr = __skb_header_pointer(skb, *p_nhoff, sizeof(_hdr), data, hlen,
+				   &_hdr);
+	if (!hdr)
+		return FLOW_DISSECT_RET_OUT_BAD;
+
+	if ((hdr->flags >> 5) != GTP_V0)
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	ip_version = skb_header_pointer(skb, *p_nhoff + sizeof(_hdr),
+					sizeof(*ip_version),
+					&_ip_version);
+	if (!ip_version)
+		return FLOW_DISSECT_RET_OUT_BAD;
+
+	proto = __skb_direct_ip_dissect(ip_version);
+	if (!proto)
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	*p_ip_proto = proto;
+	*p_nhoff += sizeof(struct gtp0_header);
+
+	return FLOW_DISSECT_RET_IPPROTO_AGAIN;
+}
+
+static enum flow_dissect_ret
+__skb_flow_dissect_gtp1u(const struct sk_buff *skb,
+			 struct flow_dissector *flow_dissector,
+			 void *target_container, const void *data,
+			 __u8 *p_ip_proto, int *p_nhoff, int hlen,
+			 unsigned int flags)
+{
+	__u8 *ip_version, _ip_version, proto;
+	struct gtp1_header *hdr, _hdr;
+	int hdrlen = sizeof(_hdr);
+
+	hdr = __skb_header_pointer(skb, *p_nhoff, sizeof(_hdr), data, hlen,
+				   &_hdr);
+	if (!hdr)
+		return FLOW_DISSECT_RET_OUT_BAD;
+
+	if ((hdr->flags >> 5) != GTP_V1)
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	if (hdr->type != GTP_TPDU)
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	if (hdr->flags & GTP1_F_MASK)
+		hdrlen += 4;
+
+	/* Skip over GTP extension headers if they are present */
+	if (hdr->flags & GTP1_F_EXTHDR &&
+	    gtp_parse_exthdrs(skb, &hdrlen) < 0)
+		return FLOW_DISSECT_RET_OUT_BAD;
+
+	/* Exit if either NPDU or SEQ glags are set */
+	if (hdr->flags & GTP1_F_NPDU ||
+	    hdr->flags & GTP1_F_SEQ)
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	ip_version = skb_header_pointer(skb, *p_nhoff + hdrlen,
+					sizeof(*ip_version),
+					&_ip_version);
+	if (!ip_version)
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	proto = __skb_direct_ip_dissect(ip_version);
+	if (!proto)
+		return FLOW_DISSECT_RET_OUT_GOOD;
+
+	*p_ip_proto = proto;
+	*p_nhoff += hdrlen;
+
+	return FLOW_DISSECT_RET_IPPROTO_AGAIN;
+}
+
 /**
  * __skb_flow_dissect_batadv() - dissect batman-adv header
  * @skb: sk_buff to with the batman-adv header
@@ -1053,6 +1140,16 @@ __skb_flow_dissect_udp(const struct sk_buff *skb, const struct net *net,
 		*p_ip_proto = IPPROTO_L2TP;
 		ret = FLOW_DISSECT_RET_IPPROTO_AGAIN;
 		break;
+	case UDP_ENCAP_GTP0:
+		ret = __skb_flow_dissect_gtp0(skb, flow_dissector,
+					      target_container, data,
+					      p_ip_proto, &nhoff, hlen, flags);
+		break;
+	case UDP_ENCAP_GTP1U:
+		ret = __skb_flow_dissect_gtp1u(skb, flow_dissector,
+					       target_container, data,
+					       p_ip_proto, &nhoff, hlen, flags);
+		break;
 	case UDP_ENCAP_FOU:
 		*p_ip_proto = fou_protocol;
 		ret = FLOW_DISSECT_RET_IPPROTO_AGAIN;
Signature · 1 line
2.34.1
#14 lore raw

PATCH v4 13/13 flow_dissector: Add case in ipproto switch for NEXTHDR_NONE

In reply to Tom Herbert

Protocol number 59 (no-next-header) means nothing follows the IP header, break out of the flow dissector loop on FLOW_DISSECT_RET_OUT_GOOD when encountered in a packet

---
 net/core/flow_dissector.c | 3 +++
 1 file changed, 3 insertions(+)
net/core/flow_dissector.c +3 -0
index ae56de7d420a..6f50cbb39539 100644
@@ -1993,6 +1993,9 @@ bool __skb_flow_dissect(const struct net *net,
 		fdret = FLOW_DISSECT_RET_OUT_GOOD;
 		break;
 	}
+	case NEXTHDR_NONE:
+		fdret = FLOW_DISSECT_RET_OUT_GOOD;
+		break;
 	case IPPROTO_IPIP:
 		if (flags & FLOW_DISSECTOR_F_STOP_BEFORE_ENCAP) {
 			fdret = FLOW_DISSECT_RET_OUT_GOOD;
Signature · 1 line
2.34.1