Skip to contentSkip to conversation

Add luma 16-bit interlaced pixel format

PATCH In review Dmitry Perchanov 3 participants 6 messages Aug 26, 2024 – Aug 30, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover Add luma 16-bit interlaced pixel format

The formats added by this patch are:

        V4L2_PIX_FMT_Y16I
        UVC_GUID_FORMAT_Y16I

Interlaced lumina format primary use in RealSense Depth cameras with stereo stream for left and right image sensors.

Dmitry Perchanov (2):
v4l: Add luma 16-bit interlaced pixel format
uvc: Add luma 16-bit interlaced pixel format

 .../userspace-api/media/v4l/pixfmt-y16i.rst   | 74 +++++++++++++++++++
 .../userspace-api/media/v4l/yuv-formats.rst   |  1 +
 drivers/media/common/uvc.c                    |  4 +
 drivers/media/v4l2-core/v4l2-ioctl.c          |  1 +
 include/linux/usb/uvc.h                       |  3 +
 include/uapi/linux/videodev2.h                |  1 +
 6 files changed, 84 insertions(+)
 create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-y16i.rst
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/2 v4l: Add luma 16-bit interlaced pixel format

The formats added by this patch are:

        V4L2_PIX_FMT_Y16I

Interlaced lumina format primary use in RealSense Depth cameras with stereo stream for left and right image sensors.

---
 .../userspace-api/media/v4l/pixfmt-y16i.rst   | 74 +++++++++++++++++++
 .../userspace-api/media/v4l/yuv-formats.rst   |  1 +
 drivers/media/v4l2-core/v4l2-ioctl.c          |  1 +
 include/uapi/linux/videodev2.h                |  1 +
 4 files changed, 77 insertions(+)
 create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-y16i.rst
Documentation/userspace-api/media/v4l/pixfmt-y16i.rst new file +74 -0
new file mode 100644
index 000000000000..fe4f441cd63c
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _V4L2-PIX-FMT-Y16I:
+
+**************************
+V4L2_PIX_FMT_Y16I ('Y16I')
+**************************
+
+Interleaved grey-scale image, e.g. from a stereo-pair
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 16 bits per pixel, but with
+pixels from 2 sources interleaved and unpacked. Each pixel is stored
+in a 16-bit word in the little-endian order.
+The first pixel is from the left source.
+
+**Pixel unpacked representation.**
+Left/Right pixels 16-bit unpacked - 16-bit for each interleaved pixel.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Y'\ :sub:`0L[7:0]`
+      - Y'\ :sub:`0L[15:8]`
+      - Y'\ :sub:`0R[7:0]`
+      - Y'\ :sub:`0R[15:8]`
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00Llow`
+      - Y'\ :sub:`00Lhigh`
+      - Y'\ :sub:`00Rlow`
+      - Y'\ :sub:`00Rhigh`
+      - Y'\ :sub:`01Llow`
+      - Y'\ :sub:`01Lhigh`
+      - Y'\ :sub:`01Rlow`
+      - Y'\ :sub:`01Rhigh`
+    * - start + 8:
+      - Y'\ :sub:`10Llow`
+      - Y'\ :sub:`10Lhigh`
+      - Y'\ :sub:`10Rlow`
+      - Y'\ :sub:`10Rhigh`
+      - Y'\ :sub:`11Llow`
+      - Y'\ :sub:`11Lhigh`
+      - Y'\ :sub:`11Rlow`
+      - Y'\ :sub:`11Rhigh`
+    * - start + 16:
+      - Y'\ :sub:`20Llow`
+      - Y'\ :sub:`20Lhigh`
+      - Y'\ :sub:`20Rlow`
+      - Y'\ :sub:`20Rhigh`
+      - Y'\ :sub:`21Llow`
+      - Y'\ :sub:`21Lhigh`
+      - Y'\ :sub:`21Rlow`
+      - Y'\ :sub:`21Rhigh`
+    * - start + 24:
+      - Y'\ :sub:`30Llow`
+      - Y'\ :sub:`30Lhigh`
+      - Y'\ :sub:`30Rlow`
+      - Y'\ :sub:`30Rhigh`
+      - Y'\ :sub:`31Llow`
+      - Y'\ :sub:`31Lhigh`
+      - Y'\ :sub:`31Rlow`
+      - Y'\ :sub:`31Rhigh`
Documentation/userspace-api/media/v4l/yuv-formats.rst +1 -0
index 24b34cdfa6fe..78ee406d7647 100644
@@ -269,5 +269,6 @@ image.
     pixfmt-yuv-luma
     pixfmt-y8i
     pixfmt-y12i
+    pixfmt-y16i
     pixfmt-uv8
     pixfmt-m420
drivers/media/v4l2-core/v4l2-ioctl.c +1 -0
index 5eb4d797d259..4fffa5739895 100644
@@ -1327,6 +1327,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
 	case V4L2_PIX_FMT_Y14P:		descr = "14-bit Greyscale (MIPI Packed)"; break;
 	case V4L2_PIX_FMT_Y8I:		descr = "Interleaved 8-bit Greyscale"; break;
 	case V4L2_PIX_FMT_Y12I:		descr = "Interleaved 12-bit Greyscale"; break;
+	case V4L2_PIX_FMT_Y16I:		descr = "Interleaved 16-bit Greyscale"; break;
 	case V4L2_PIX_FMT_Z16:		descr = "16-bit Depth"; break;
 	case V4L2_PIX_FMT_INZI:		descr = "Planar 10:16 Greyscale Depth"; break;
 	case V4L2_PIX_FMT_CNF4:		descr = "4-bit Depth Confidence (Packed)"; break;
include/uapi/linux/videodev2.h +1 -0
index 4e91362da6da..46f616e43ad6 100644
@@ -797,6 +797,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
 #define V4L2_PIX_FMT_Y8I      v4l2_fourcc('Y', '8', 'I', ' ') /* Greyscale 8-bit L/R interleaved */
 #define V4L2_PIX_FMT_Y12I     v4l2_fourcc('Y', '1', '2', 'I') /* Greyscale 12-bit L/R interleaved */
+#define V4L2_PIX_FMT_Y16I     v4l2_fourcc('Y', '1', '6', 'I') /* Greyscale 16-bit L/R interleaved */
 #define V4L2_PIX_FMT_Z16      v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */
 #define V4L2_PIX_FMT_MT21C    v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode  */
 #define V4L2_PIX_FMT_MM21     v4l2_fourcc('M', 'M', '2', '1') /* Mediatek 8-bit block mode, two non-contiguous planes */
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] v4l: Add luma 16-bit interlaced pixel format

Hi Dmitry,

Thank you for the patch.

Quoted 31 lines · Dmitry Perchanov

The formats added by this patch are:

        V4L2_PIX_FMT_Y16I

Interlaced lumina format primary use in RealSense Depth cameras with stereo stream for left and right image sensors.

---
 .../userspace-api/media/v4l/pixfmt-y16i.rst   | 74 +++++++++++++++++++
 .../userspace-api/media/v4l/yuv-formats.rst   |  1 +
 drivers/media/v4l2-core/v4l2-ioctl.c          |  1 +
 include/uapi/linux/videodev2.h                |  1 +
 4 files changed, 77 insertions(+)
 create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-y16i.rst
Documentation/userspace-api/media/v4l/pixfmt-y16i.rst new file +8 -0
new file mode 100644
index 000000000000..fe4f441cd63c
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _V4L2-PIX-FMT-Y16I:
+
+**************************
+V4L2_PIX_FMT_Y16I ('Y16I')
+**************************
+

Documentation/userspace-api/media/v4l/pixfmt-y16i.rst line 18

Quoted 10 lines
Documentation/userspace-api/media/v4l/pixfmt-y16i.rst new file +10 -0
+Interleaved grey-scale image, e.g. from a stereo-pair
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 16 bits per pixel, but with
+pixels from 2 sources interleaved and unpacked. Each pixel is stored
+in a 16-bit word in the little-endian order.
+The first pixel is from the left source.

You can reflow this to 80 columns:

This is a grey-scale image with a depth of 16 bits per pixel, but with pixels from 2 sources interleaved and unpacked. Each pixel is stored in a 16-bit word in the little-endian order. The first pixel is from the left source.

With this,

I can make that change locally, no need to send a new version just for this.

Quoted 91 lines
Documentation/userspace-api/media/v4l/pixfmt-y16i.rst new file +56 -0
+
+**Pixel unpacked representation.**
+Left/Right pixels 16-bit unpacked - 16-bit for each interleaved pixel.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Y'\ :sub:`0L[7:0]`
+      - Y'\ :sub:`0L[15:8]`
+      - Y'\ :sub:`0R[7:0]`
+      - Y'\ :sub:`0R[15:8]`
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00Llow`
+      - Y'\ :sub:`00Lhigh`
+      - Y'\ :sub:`00Rlow`
+      - Y'\ :sub:`00Rhigh`
+      - Y'\ :sub:`01Llow`
+      - Y'\ :sub:`01Lhigh`
+      - Y'\ :sub:`01Rlow`
+      - Y'\ :sub:`01Rhigh`
+    * - start + 8:
+      - Y'\ :sub:`10Llow`
+      - Y'\ :sub:`10Lhigh`
+      - Y'\ :sub:`10Rlow`
+      - Y'\ :sub:`10Rhigh`
+      - Y'\ :sub:`11Llow`
+      - Y'\ :sub:`11Lhigh`
+      - Y'\ :sub:`11Rlow`
+      - Y'\ :sub:`11Rhigh`
+    * - start + 16:
+      - Y'\ :sub:`20Llow`
+      - Y'\ :sub:`20Lhigh`
+      - Y'\ :sub:`20Rlow`
+      - Y'\ :sub:`20Rhigh`
+      - Y'\ :sub:`21Llow`
+      - Y'\ :sub:`21Lhigh`
+      - Y'\ :sub:`21Rlow`
+      - Y'\ :sub:`21Rhigh`
+    * - start + 24:
+      - Y'\ :sub:`30Llow`
+      - Y'\ :sub:`30Lhigh`
+      - Y'\ :sub:`30Rlow`
+      - Y'\ :sub:`30Rhigh`
+      - Y'\ :sub:`31Llow`
+      - Y'\ :sub:`31Lhigh`
+      - Y'\ :sub:`31Rlow`
+      - Y'\ :sub:`31Rhigh`
Documentation/userspace-api/media/v4l/yuv-formats.rst +1 -0
index 24b34cdfa6fe..78ee406d7647 100644
@@ -269,5 +269,6 @@ image.
     pixfmt-yuv-luma
     pixfmt-y8i
     pixfmt-y12i
+    pixfmt-y16i
     pixfmt-uv8
     pixfmt-m420
drivers/media/v4l2-core/v4l2-ioctl.c +1 -0
index 5eb4d797d259..4fffa5739895 100644
@@ -1327,6 +1327,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
 	case V4L2_PIX_FMT_Y14P:		descr = "14-bit Greyscale (MIPI Packed)"; break;
 	case V4L2_PIX_FMT_Y8I:		descr = "Interleaved 8-bit Greyscale"; break;
 	case V4L2_PIX_FMT_Y12I:		descr = "Interleaved 12-bit Greyscale"; break;
+	case V4L2_PIX_FMT_Y16I:		descr = "Interleaved 16-bit Greyscale"; break;
 	case V4L2_PIX_FMT_Z16:		descr = "16-bit Depth"; break;
 	case V4L2_PIX_FMT_INZI:		descr = "Planar 10:16 Greyscale Depth"; break;
 	case V4L2_PIX_FMT_CNF4:		descr = "4-bit Depth Confidence (Packed)"; break;
include/uapi/linux/videodev2.h +1 -0
index 4e91362da6da..46f616e43ad6 100644
@@ -797,6 +797,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
 #define V4L2_PIX_FMT_Y8I      v4l2_fourcc('Y', '8', 'I', ' ') /* Greyscale 8-bit L/R interleaved */
 #define V4L2_PIX_FMT_Y12I     v4l2_fourcc('Y', '1', '2', 'I') /* Greyscale 12-bit L/R interleaved */
+#define V4L2_PIX_FMT_Y16I     v4l2_fourcc('Y', '1', '6', 'I') /* Greyscale 16-bit L/R interleaved */
 #define V4L2_PIX_FMT_Z16      v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */
 #define V4L2_PIX_FMT_MT21C    v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode  */
 #define V4L2_PIX_FMT_MM21     v4l2_fourcc('M', 'M', '2', '1') /* Mediatek 8-bit block mode, two non-contiguous planes */
Signature · 3 lines
Regards,

Laurent Pinchart
#3 lore raw

Re: [PATCH 1/2] v4l: Add luma 16-bit interlaced pixel format

In reply to Dmitry Perchanov

Hi,

just cosmetic comment.

Le lundi 26 août 2024 à 16:04 +0300, Dmitry Perchanov a écrit :

Quoted 5 lines

The formats added by this patch are:

        V4L2_PIX_FMT_Y16I

Interlaced lumina format primary use in RealSense

Here we specify the format as interlaced ...

Quoted 24 lines

Depth cameras with stereo stream for left and right image sensors.

---
 .../userspace-api/media/v4l/pixfmt-y16i.rst   | 74 +++++++++++++++++++
 .../userspace-api/media/v4l/yuv-formats.rst   |  1 +
 drivers/media/v4l2-core/v4l2-ioctl.c          |  1 +
 include/uapi/linux/videodev2.h                |  1 +
 4 files changed, 77 insertions(+)
 create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-y16i.rst
Documentation/userspace-api/media/v4l/pixfmt-y16i.rst new file +6 -0
new file mode 100644
index 000000000000..fe4f441cd63c
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _V4L2-PIX-FMT-Y16I:
+
+**************************
+V4L2_PIX_FMT_Y16I ('Y16I')

Documentation/userspace-api/media/v4l/pixfmt-y16i.rst line 16

Quoted 10 lines
Documentation/userspace-api/media/v4l/pixfmt-y16i.rst new file +10 -0
+**************************
+
+Interleaved grey-scale image, e.g. from a stereo-pair
+
+
+Description
+===========
+
+This is a grey-scale image with a depth of 16 bits per pixel, but with
+pixels from 2 sources interleaved and unpacked. Each pixel is stored

... But document it as interleaved. Id unify the wording as interleaved everywhere if you don't mind. My weak argument is that interlaced is largely used in the media subsystem to refer to the technique of passing half the image data, alternating between top and bottom field. In that context, we then use interleave to describe on method of line/field storage (we also have sequential and alternate method supported).

Nicolas

Quoted 93 lines
Documentation/userspace-api/media/v4l/pixfmt-y16i.rst new file +58 -0
+in a 16-bit word in the little-endian order.
+The first pixel is from the left source.
+
+**Pixel unpacked representation.**
+Left/Right pixels 16-bit unpacked - 16-bit for each interleaved pixel.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Y'\ :sub:`0L[7:0]`
+      - Y'\ :sub:`0L[15:8]`
+      - Y'\ :sub:`0R[7:0]`
+      - Y'\ :sub:`0R[15:8]`
+
+**Byte Order.**
+Each cell is one byte.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00Llow`
+      - Y'\ :sub:`00Lhigh`
+      - Y'\ :sub:`00Rlow`
+      - Y'\ :sub:`00Rhigh`
+      - Y'\ :sub:`01Llow`
+      - Y'\ :sub:`01Lhigh`
+      - Y'\ :sub:`01Rlow`
+      - Y'\ :sub:`01Rhigh`
+    * - start + 8:
+      - Y'\ :sub:`10Llow`
+      - Y'\ :sub:`10Lhigh`
+      - Y'\ :sub:`10Rlow`
+      - Y'\ :sub:`10Rhigh`
+      - Y'\ :sub:`11Llow`
+      - Y'\ :sub:`11Lhigh`
+      - Y'\ :sub:`11Rlow`
+      - Y'\ :sub:`11Rhigh`
+    * - start + 16:
+      - Y'\ :sub:`20Llow`
+      - Y'\ :sub:`20Lhigh`
+      - Y'\ :sub:`20Rlow`
+      - Y'\ :sub:`20Rhigh`
+      - Y'\ :sub:`21Llow`
+      - Y'\ :sub:`21Lhigh`
+      - Y'\ :sub:`21Rlow`
+      - Y'\ :sub:`21Rhigh`
+    * - start + 24:
+      - Y'\ :sub:`30Llow`
+      - Y'\ :sub:`30Lhigh`
+      - Y'\ :sub:`30Rlow`
+      - Y'\ :sub:`30Rhigh`
+      - Y'\ :sub:`31Llow`
+      - Y'\ :sub:`31Lhigh`
+      - Y'\ :sub:`31Rlow`
+      - Y'\ :sub:`31Rhigh`
Documentation/userspace-api/media/v4l/yuv-formats.rst +1 -0
index 24b34cdfa6fe..78ee406d7647 100644
@@ -269,5 +269,6 @@ image.
     pixfmt-yuv-luma
     pixfmt-y8i
     pixfmt-y12i
+    pixfmt-y16i
     pixfmt-uv8
     pixfmt-m420
drivers/media/v4l2-core/v4l2-ioctl.c +1 -0
index 5eb4d797d259..4fffa5739895 100644
@@ -1327,6 +1327,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
 	case V4L2_PIX_FMT_Y14P:		descr = "14-bit Greyscale (MIPI Packed)"; break;
 	case V4L2_PIX_FMT_Y8I:		descr = "Interleaved 8-bit Greyscale"; break;
 	case V4L2_PIX_FMT_Y12I:		descr = "Interleaved 12-bit Greyscale"; break;
+	case V4L2_PIX_FMT_Y16I:		descr = "Interleaved 16-bit Greyscale"; break;
 	case V4L2_PIX_FMT_Z16:		descr = "16-bit Depth"; break;
 	case V4L2_PIX_FMT_INZI:		descr = "Planar 10:16 Greyscale Depth"; break;
 	case V4L2_PIX_FMT_CNF4:		descr = "4-bit Depth Confidence (Packed)"; break;
include/uapi/linux/videodev2.h +1 -0
index 4e91362da6da..46f616e43ad6 100644
@@ -797,6 +797,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
 #define V4L2_PIX_FMT_Y8I      v4l2_fourcc('Y', '8', 'I', ' ') /* Greyscale 8-bit L/R interleaved */
 #define V4L2_PIX_FMT_Y12I     v4l2_fourcc('Y', '1', '2', 'I') /* Greyscale 12-bit L/R interleaved */
+#define V4L2_PIX_FMT_Y16I     v4l2_fourcc('Y', '1', '6', 'I') /* Greyscale 16-bit L/R interleaved */
 #define V4L2_PIX_FMT_Z16      v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */
 #define V4L2_PIX_FMT_MT21C    v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode  */
 #define V4L2_PIX_FMT_MM21     v4l2_fourcc('M', 'M', '2', '1') /* Mediatek 8-bit block mode, two non-contiguous planes */
#4 lore raw

PATCH 2/2 uvc: Add luma 16-bit interlaced pixel format

In reply to Dmitry Perchanov

The formats added by this patch are:

UVC_GUID_FORMAT_Y16I

Interlaced lumina format primary use in RealSense Depth cameras with stereo stream for left and right image sensors.

---
 drivers/media/common/uvc.c | 4 ++++
 include/linux/usb/uvc.h    | 3 +++
 2 files changed, 7 insertions(+)
drivers/media/common/uvc.c +4 -0
index c54c2268fee6..027498d37464 100644
@@ -120,6 +120,10 @@ static const struct uvc_format_desc uvc_fmts[] = {
 		.guid		= UVC_GUID_FORMAT_Y12I,
 		.fcc		= V4L2_PIX_FMT_Y12I,
 	},
+	{
+		.guid		= UVC_GUID_FORMAT_Y16I,
+		.fcc		= V4L2_PIX_FMT_Y16I,
+	},
 	{
 		.guid		= UVC_GUID_FORMAT_Z16,
 		.fcc		= V4L2_PIX_FMT_Z16,
include/linux/usb/uvc.h +3 -0
index 88d96095bcb1..1c16be20c966 100644
@@ -118,6 +118,9 @@
 #define UVC_GUID_FORMAT_Y12I \
 	{ 'Y',  '1',  '2',  'I', 0x00, 0x00, 0x10, 0x00, \
 	 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y16I \
+	{ 'Y',  '1',  '6',  'I', 0x00, 0x00, 0x10, 0x00, \
+	 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
 #define UVC_GUID_FORMAT_Z16 \
 	{ 'Z',  '1',  '6',  ' ', 0x00, 0x00, 0x10, 0x00, \
 	 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 2/2
#5 lore raw

Re: [PATCH 2/2] uvc: Add luma 16-bit interlaced pixel format

Hi Dmitry,

Thank you for the patch.

The subject should start with "media: uvcvideo:". I'll update this locally.

Quoted 9 lines · Dmitry Perchanov

The formats added by this patch are:

UVC_GUID_FORMAT_Y16I

Interlaced lumina format primary use in RealSense Depth cameras with stereo stream for left and right image sensors.

Quoted 34 lines
---
 drivers/media/common/uvc.c | 4 ++++
 include/linux/usb/uvc.h    | 3 +++
 2 files changed, 7 insertions(+)
drivers/media/common/uvc.c +4 -0
index c54c2268fee6..027498d37464 100644
@@ -120,6 +120,10 @@ static const struct uvc_format_desc uvc_fmts[] = {
 		.guid		= UVC_GUID_FORMAT_Y12I,
 		.fcc		= V4L2_PIX_FMT_Y12I,
 	},
+	{
+		.guid		= UVC_GUID_FORMAT_Y16I,
+		.fcc		= V4L2_PIX_FMT_Y16I,
+	},
 	{
 		.guid		= UVC_GUID_FORMAT_Z16,
 		.fcc		= V4L2_PIX_FMT_Z16,
include/linux/usb/uvc.h +3 -0
index 88d96095bcb1..1c16be20c966 100644
@@ -118,6 +118,9 @@
 #define UVC_GUID_FORMAT_Y12I \
 	{ 'Y',  '1',  '2',  'I', 0x00, 0x00, 0x10, 0x00, \
 	 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y16I \
+	{ 'Y',  '1',  '6',  'I', 0x00, 0x00, 0x10, 0x00, \
+	 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
 #define UVC_GUID_FORMAT_Z16 \
 	{ 'Z',  '1',  '6',  ' ', 0x00, 0x00, 0x10, 0x00, \
 	 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
Signature · 3 lines
Regards,

Laurent Pinchart