Tegra234 AGX Orin DTS Updates
Subsystems (2)
v2 cover Tegra234 AGX Orin DTS Updates
This patchset restructures the AGX Orin device tree for improved adaptability. It also fixes the placement of several nodes to be in the proper files.
Changes in v2:
- Added "arm64: tegra: Add common nodes to AGX Orin module"
- Removed "arm64: tegra: Create SKU8 AGX Orin board file"
Dara Stotland (7):
arm64: tegra: Add common nodes to AGX Orin module
arm64: tegra: Combine AGX Orin board files
arm64: tegra: Combine IGX Orin board files
arm64: tegra: Move AGX Orin nodes to correct location
arm64: tegra: Move padctl supply nodes to AGX Orin module
arm64: tegra: Move BPMP nodes to AGX Orin module
arm64: tegra: Add thermal nodes to AGX Orin SKU8
.../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 135 ---------- .../boot/dts/nvidia/tegra234-p3701-0008.dtsi | 115 ++------ .../arm64/boot/dts/nvidia/tegra234-p3701.dtsi | 125 +++++++++ .../nvidia/tegra234-p3737-0000+p3701-0000.dts | 108 +++++++- .../boot/dts/nvidia/tegra234-p3737-0000.dtsi | 90 ------- .../nvidia/tegra234-p3740-0002+p3701-0008.dts | 230 +++++++++++++++- .../boot/dts/nvidia/tegra234-p3740-0002.dtsi | 248 ------------------ 7 files changed, 476 insertions(+), 575 deletions(-) delete mode 100644 arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi delete mode 100644 arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi
Signature · 1 line
2.17.1
PATCH v2 1/7 arm64: tegra: Add common nodes to AGX Orin module
The AGX Orin module boards contain common nodes that can be moved to the included module dtsi. This eliminates redundancy within the files and reduces lines of code. Data from tegra234-p3701-0000 and tegra234-p3701-0008 that is common is now in tegra234-p3701.dtsi.
--- .../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 83 ----------------- .../boot/dts/nvidia/tegra234-p3701-0008.dtsi | 89 ------------------- .../arm64/boot/dts/nvidia/tegra234-p3701.dtsi | 85 ++++++++++++++++++ 3 files changed, 85 insertions(+), 172 deletions(-)
arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +0 -83
@@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -#include "tegra234.dtsi" #include "tegra234-p3701.dtsi" / {
@@ -8,34 +7,6 @@ compatible = "nvidia,p3701-0000", "nvidia,tegra234"; bus@0 { - i2c@3160000 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - - label = "module"; - vcc-supply = <&vdd_1v8_hs>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - - spi@3270000 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <102000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - }; - }; - mmc@3400000 { status = "okay"; bus-width = <4>;
@@ -43,12 +14,6 @@ disable-wp; }; - mmc@3460000 { - status = "okay"; - bus-width = <8>; - non-removable; - }; - padctl@3520000 { vclamp-usb-supply = <&vdd_1v8_ao>; avdd-usb-supply = <&vdd_3v3_ao>;
@@ -72,54 +37,6 @@ }; }; - rtc@c2a0000 { - status = "okay"; - }; - - pmc@c360000 { - nvidia,invert-interrupt; - }; - }; - - vdd_5v0_sys: regulator-vdd-5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "VIN_SYS_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8_ls: regulator-vdd-1v8-ls { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_LS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_1v8_hs: regulator-vdd-1v8-hs { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_HS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_1v8_ao: regulator-vdd-1v8-ao { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_AO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_3v3_ao: regulator-vdd-3v3-ao { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_AO"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; }; vdd_3v3_pcie: regulator-vdd-3v3-pcie {
arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi +0 -89
103 lines not on this page · raw message
arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi +85 -0
101 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v2 2/7 arm64: tegra: Combine AGX Orin board files
In reply to Dara StotlandThe current AGX Orin structure has both a top-level module+board file as well as a board file. Most of the data in the board-file is closely related to the module itself. The benefit of this extra file is outweighed by the additional complexity. Merge the board file into the module+board file for simplicity.
--- .../nvidia/tegra234-p3737-0000+p3701-0000.dts | 82 ++++++++++++++++- .../boot/dts/nvidia/tegra234-p3737-0000.dtsi | 90 ------------------- 2 files changed, 80 insertions(+), 92 deletions(-) delete mode 100644 arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +80 -2
@@ -3,9 +3,9 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/sound/rt5640.h> #include "tegra234-p3701-0000.dtsi" -#include "tegra234-p3737-0000.dtsi" / { model = "NVIDIA Jetson AGX Orin Developer Kit";
@@ -22,23 +22,90 @@ }; bus@0 { + aconnect@2900000 { + ahub@2900800 { + i2s@2901000 { + ports { + port@1 { + endpoint { + dai-format = "i2s"; + remote-endpoint = <&rt5640_ep>; + }; + }; + }; + }; + }; + }; + serial@3100000 { compatible = "nvidia,tegra194-hsuart"; reset-names = "serial"; status = "okay"; }; + i2c@3160000 { + status = "okay"; + + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + + label = "system"; + vcc-supply = <&vdd_1v8_sys>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + serial@31d0000 { current-speed = <115200>; status = "okay"; }; + i2c@31e0000 { + status = "okay"; + + audio-codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>; + clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>; + clock-names = "mclk"; + realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>; + realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>; + realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>; + sound-name-prefix = "CVB-RT"; + + port { + rt5640_ep: endpoint { + remote-endpoint = <&i2s1_dap>; + mclk-fs = <256>; + }; + }; + }; + }; + + pwm@3280000 { + status = "okay"; + }; + pwm@32a0000 { assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; status = "okay"; }; + pwm@32c0000 { + status = "okay"; + }; + + pwm@32f0000 { + status = "okay"; + }; + hda@3510000 { nvidia,model = "NVIDIA Jetson AGX Orin HDA"; status = "okay";
@@ -341,8 +408,11 @@ }; }; - pwm-fan { + fan: pwm-fan { + compatible = "pwm-fan"; cooling-levels = <66 215 255>; + pwms = <&pwm3 0 45334>; + #cooling-cells = <2>; }; serial {
@@ -444,4 +514,12 @@ }; }; }; + + vdd_1v8_sys: regulator-vdd-1v8-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_SYS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; };
arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi deleted +0 -90
90 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v2 3/7 arm64: tegra: Combine IGX Orin board files
In reply to Dara StotlandCurrent IGX Orin structure has both a top-level module+board file as well as a board file. Most of the data in the board-file is closely related to the module itself. The benefit of this extra file is outweighed by the additional complexity. Merge the board file into the module+board file for simplicity.
--- .../nvidia/tegra234-p3740-0002+p3701-0008.dts | 236 ++++++++++++++++- .../boot/dts/nvidia/tegra234-p3740-0002.dtsi | 248 ------------------ 2 files changed, 235 insertions(+), 249 deletions(-) delete mode 100644 arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi
arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts +235 -1
@@ -3,8 +3,8 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/sound/rt5640.h> #include "tegra234-p3701-0008.dtsi" -#include "tegra234-p3740-0002.dtsi" / { model = "NVIDIA IGX Orin Development Kit";
@@ -20,6 +20,32 @@ }; bus@0 { + aconnect@2900000 { + ahub@2900800 { + i2s@2901300 { + ports { + port@1 { + endpoint { + dai-format = "i2s"; + remote-endpoint = <&rt5640_ep>; + }; + }; + }; + }; + + i2s@2901500 { + ports { + port@1 { + endpoint { + bitclock-master; + frame-master; + }; + }; + }; + }; + }; + }; + serial@3100000 { compatible = "nvidia,tegra194-hsuart"; reset-names = "serial";
@@ -45,6 +71,40 @@ i2c@31c0000 { status = "okay"; + rt5640: audio-codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA234_MAIN_GPIO(F, 3) GPIO_ACTIVE_HIGH>; + clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>; + clock-names = "mclk"; + + realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>; + realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>; + realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>; + + sound-name-prefix = "CVB-RT"; + + port { + rt5640_ep: endpoint { + remote-endpoint = <&i2s4_dap>; + mclk-fs = <256>; + }; + }; + }; + + /* carrier board ID EEPROM */ + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + + label = "system"; + vcc-supply = <&vdd_1v8_ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; }; i2c@31e0000 {
@@ -60,6 +120,121 @@ status = "okay"; }; + padctl@3520000 { + vclamp-usb-supply = <&vdd_1v8_ao>; + avdd-usb-supply = <&vdd_3v3_ao>; + status = "okay"; + + pads { + usb2 { + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-3 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "otg"; + usb-role-switch; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-1 { + mode = "host"; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-2 { + mode = "host"; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + mode = "host"; + status = "okay"; + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + + usb3-2 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + }; + }; + + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb3-0"; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", + "usb3-0", "usb3-1", "usb3-2"; + }; + fuse@3810000 { status = "okay"; };
@@ -70,6 +245,37 @@ i2c@c250000 { status = "okay"; + + power-sensor@41 { + compatible = "ti,ina3221"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "CVB_ATX_12V"; + shunt-resistor-micro-ohms = <2000>; + }; + + input@1 { + reg = <0x1>; + label = "CVB_ATX_3V3"; + shunt-resistor-micro-ohms = <2000>; + }; + + input@2 { + reg = <0x2>; + label = "CVB_ATX_5V"; + shunt-resistor-micro-ohms = <2000>; + }; + }; + + power-sensor@44 { + compatible = "ti,ina219"; + reg = <0x44>; + shunt-resistor = <2000>; + }; }; host1x@13e00000 {
@@ -235,4 +441,32 @@ "CVB-RT DMIC1", "CVB-RT MIC", "CVB-RT DMIC2", "CVB-RT MIC"; }; + + vdd_3v3_dp: regulator-vdd-3v3-dp { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_DP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_sys>; + gpio = <&gpio TEGRA234_MAIN_GPIO(H, 6) 0>; + enable-active-high; + regulator-always-on; + }; + + vdd_3v3_sys: regulator-vdd-3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_3v3_wifi: regulator-vdd-3v3-wifi { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_WIFI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(G, 3) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; };
arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi deleted +0 -248
248 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v2 4/7 arm64: tegra: Move AGX Orin nodes to correct location
In reply to Dara StotlandSome of the nodes inside the AGX Orin module file are in the wrong location. In particular, the SD card interface and two of the PCIe regulators in the module file should instead reside in the board file. These components are not part of the module. They are part of the carrier board. Move these nodes to the correct location.
--- .../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 25 ------------------ .../nvidia/tegra234-p3737-0000+p3701-0000.dts | 26 +++++++++++++++++++ 2 files changed, 26 insertions(+), 25 deletions(-)
arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +0 -25
@@ -7,12 +7,6 @@ compatible = "nvidia,p3701-0000", "nvidia,tegra234"; bus@0 { - mmc@3400000 { - status = "okay"; - bus-width = <4>; - cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>; - disable-wp; - }; padctl@3520000 { vclamp-usb-supply = <&vdd_1v8_ao>;
@@ -39,25 +33,6 @@ }; - vdd_3v3_pcie: regulator-vdd-3v3-pcie { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_PCIE"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - enable-active-high; - }; - - vdd_12v_pcie: regulator-vdd-12v-pcie { - compatible = "regulator-fixed"; - regulator-name = "VDD_12V_PCIE"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; - regulator-boot-on; - }; - thermal-zones { tj-thermal { polling-delay = <1000>;
arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +26 -0
@@ -106,6 +106,13 @@ status = "okay"; }; + mmc@3400000 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>; + disable-wp; + }; + hda@3510000 { nvidia,model = "NVIDIA Jetson AGX Orin HDA"; status = "okay";
@@ -522,4 +529,23 @@ regulator-max-microvolt = <1800000>; regulator-always-on; }; + + vdd_3v3_pcie: regulator-vdd-3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_PCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; + + vdd_12v_pcie: regulator-vdd-12v-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_12V_PCIE"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; };
Signature · 1 line
2.17.1
PATCH v2 5/7 arm64: tegra: Move padctl supply nodes to AGX Orin module
In reply to Dara StotlandSome padctl supply nodes currently reside in board file, when they should reside on module level. The nodes are part of module, not board. Move these nodes to the correct AGX Orin module file.
--- .../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 27 ------------------- .../arm64/boot/dts/nvidia/tegra234-p3701.dtsi | 23 ++++++++++++++++ .../nvidia/tegra234-p3740-0002+p3701-0008.dts | 6 ----- 3 files changed, 23 insertions(+), 33 deletions(-)
arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +0 -27
@@ -6,33 +6,6 @@ model = "NVIDIA Jetson AGX Orin"; compatible = "nvidia,p3701-0000", "nvidia,tegra234"; - bus@0 { - - padctl@3520000 { - vclamp-usb-supply = <&vdd_1v8_ao>; - avdd-usb-supply = <&vdd_3v3_ao>; - - ports { - usb2-0 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-1 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-2 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-3 { - vbus-supply = <&vdd_5v0_sys>; - }; - }; - }; - - }; - thermal-zones { tj-thermal { polling-delay = <1000>;
arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi +23 -0
@@ -81,6 +81,29 @@ non-removable; }; + padctl@3520000 { + vclamp-usb-supply = <&vdd_1v8_ao>; + avdd-usb-supply = <&vdd_3v3_ao>; + + ports { + usb2-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-2 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + }; + }; + i2c@c240000 { status = "okay";
arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts +0 -6
@@ -121,8 +121,6 @@ }; padctl@3520000 { - vclamp-usb-supply = <&vdd_1v8_ao>; - avdd-usb-supply = <&vdd_3v3_ao>; status = "okay"; pads {
@@ -175,25 +173,21 @@ mode = "otg"; usb-role-switch; status = "okay"; - vbus-supply = <&vdd_5v0_sys>; }; usb2-1 { mode = "host"; status = "okay"; - vbus-supply = <&vdd_5v0_sys>; }; usb2-2 { mode = "host"; status = "okay"; - vbus-supply = <&vdd_5v0_sys>; }; usb2-3 { mode = "host"; status = "okay"; - vbus-supply = <&vdd_5v0_sys>; }; usb3-0 {
Signature · 1 line
2.17.1
PATCH v2 6/7 arm64: tegra: Move BPMP nodes to AGX Orin module
In reply to Dara StotlandAll SKUs of the p3701 module contain a temp sensor connected to the BPMP I2C. Move the associated nodes from tegra234-p3701-0008.dtsi to tegra234-p3701.dtsi. Add missing compatible.
--- .../boot/dts/nvidia/tegra234-p3701-0008.dtsi | 16 ---------------- arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi | 17 +++++++++++++++++ 2 files changed, 17 insertions(+), 16 deletions(-)
arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi +0 -16
@@ -4,20 +4,4 @@ / { compatible = "nvidia,p3701-0008", "nvidia,tegra234"; - - bpmp { - i2c { - status = "okay"; - - thermal-sensor@4c { - status = "okay"; - reg = <0x4c>; - vcc-supply = <&vdd_1v8_ao>; - }; - }; - - thermal { - status = "okay"; - }; - }; };
arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi +17 -0
@@ -166,6 +166,23 @@ }; }; + bpmp { + i2c { + status = "okay"; + + thermal-sensor@4c { + compatible = "ti,tmp451"; + status = "okay"; + reg = <0x4c>; + vcc-supply = <&vdd_1v8_ao>; + }; + }; + + thermal { + status = "okay"; + }; + }; + vdd_1v8_ao: regulator-vdd-1v8-ao { compatible = "regulator-fixed"; regulator-name = "VDD_1V8_AO";
Signature · 1 line
2.17.1
PATCH v2 7/7 arm64: tegra: Add thermal nodes to AGX Orin SKU8
In reply to Dara StotlandOne of the key differences between p3701-0000 and p3701-0008 is the temperature range. Add this info for p3701-0008.
--- .../boot/dts/nvidia/tegra234-p3701-0008.dtsi | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+)
arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi +22 -0
@@ -4,4 +4,26 @@ / { compatible = "nvidia,p3701-0008", "nvidia,tegra234"; + + thermal-zones { + tj-thermal { + polling-delay = <1000>; + polling-delay-passive = <1000>; + status = "okay"; + + trips { + tj_trip_active0: active-0 { + temperature = <85000>; + hysteresis = <4000>; + type = "active"; + }; + + tj_trip_active1: active-1 { + temperature = <105000>; + hysteresis = <4000>; + type = "active"; + }; + }; + }; + }; };
Signature · 1 line
2.17.1
Quoted 4 lines · Dara Stotland
Changes in v2:
- Added "arm64: tegra: Add common nodes to AGX Orin module"
- Removed "arm64: tegra: Create SKU8 AGX Orin board file"
Quoted 8 lines
Dara Stotland (7):
arm64: tegra: Add common nodes to AGX Orin module
arm64: tegra: Combine AGX Orin board files
arm64: tegra: Combine IGX Orin board files
arm64: tegra: Move AGX Orin nodes to correct location
arm64: tegra: Move padctl supply nodes to AGX Orin module
arm64: tegra: Move BPMP nodes to AGX Orin module
arm64: tegra: Add thermal nodes to AGX Orin SKU8
Thierry Reding
AppliedQuoted 17 lines · Dara Stotland
This patchset restructures the AGX Orin device tree for improved adaptability. It also fixes the placement of several nodes to be in the proper files.
Changes in v2:
- Added "arm64: tegra: Add common nodes to AGX Orin module"
- Removed "arm64: tegra: Create SKU8 AGX Orin board file"Dara Stotland (7):
arm64: tegra: Add common nodes to AGX Orin module
arm64: tegra: Combine AGX Orin board files
arm64: tegra: Combine IGX Orin board files
arm64: tegra: Move AGX Orin nodes to correct location
arm64: tegra: Move padctl supply nodes to AGX Orin module
arm64: tegra: Move BPMP nodes to AGX Orin module
arm64: tegra: Add thermal nodes to AGX Orin SKU8
Quoted 10 lines
.../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 135 ---------- .../boot/dts/nvidia/tegra234-p3701-0008.dtsi | 115 ++------ .../arm64/boot/dts/nvidia/tegra234-p3701.dtsi | 125 +++++++++ .../nvidia/tegra234-p3737-0000+p3701-0000.dts | 108 +++++++- .../boot/dts/nvidia/tegra234-p3737-0000.dtsi | 90 ------- .../nvidia/tegra234-p3740-0002+p3701-0008.dts | 230 +++++++++++++++- .../boot/dts/nvidia/tegra234-p3740-0002.dtsi | 248 ------------------ 7 files changed, 476 insertions(+), 575 deletions(-) delete mode 100644 arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi delete mode 100644 arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi
Applied, thanks.
Thierry