Skip to contentSkip to conversation

gpiolib:legacy: Kill GPIOF_DIR_* and GPIOF_INIT_*

PATCH Applied Andy Shevchenko 4 participants 8 messages Aug 28, 2024 – Sep 2, 2024

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

cover gpiolib:legacy: Kill GPIOF_DIR_* and GPIOF_INIT_*

Shrink the legacy API and definition surface by killing the (internal) definitions. This, in particular, will fix a couple of drivers that took it wrong.

This is assumed to go via BPIOLIB tree as this is quite small series and most of the changes related to it.

Andy Shevchenko (2):
gpiolib: legacy: Kill GPIOF_INIT_* definitions
gpiolib: legacy: Kill GPIOF_DIR_* definitions

 arch/arm/mach-ep93xx/vision_ep9307.c      |  6 ++----
 arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
 drivers/gpio/gpiolib-legacy.c             |  5 ++---
 include/linux/gpio.h                      | 12 +++---------
 4 files changed, 8 insertions(+), 17 deletions(-)
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
#1 lore raw

PATCH 1/2 gpiolib: legacy: Kill GPIOF_INIT_* definitions

Besides the fact that (old) drivers use wrong definitions, e.g., GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy definitions by killing those GPIOF_INIT_* completely.

---
 arch/arm/mach-ep93xx/vision_ep9307.c      | 3 +--
 arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +-
 drivers/gpio/gpiolib-legacy.c             | 3 +--
 include/linux/gpio.h                      | 7 ++-----
 4 files changed, 5 insertions(+), 10 deletions(-)
arch/arm/mach-ep93xx/vision_ep9307.c +1 -2
index 9471938df64c..02c5a4724192 100644
@@ -76,8 +76,7 @@ static int vision_lcd_setup(struct platform_device *pdev)
 {
 	int err;
 
-	err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
-				dev_name(&pdev->dev));
+	err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, dev_name(&pdev->dev));
 	if (err)
 		return err;
 
arch/mips/bcm63xx/boards/board_bcm963xx.c +1 -1
index 99f321b6e417..9cc8fbf218a5 100644
@@ -42,7 +42,7 @@ static struct board_info __initdata board_cvg834g = {
 	.expected_cpu_id = 0x3368,
 
 	.ephy_reset_gpio = 36,
-	.ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
+	.ephy_reset_gpio_flags = GPIOF_OUT_INIT_HIGH,
 	.has_pci = 1,
 	.has_uart0 = 1,
 	.has_uart1 = 1,
drivers/gpio/gpiolib-legacy.c +1 -2
index d27142418f9f..51d5fe203111 100644
@@ -46,8 +46,7 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
 	if (flags & GPIOF_DIR_IN)
 		err = gpiod_direction_input(desc);
 	else
-		err = gpiod_direction_output_raw(desc,
-				(flags & GPIOF_INIT_HIGH) ? 1 : 0);
+		err = gpiod_direction_output_raw(desc, !!(flags & GPIOF_OUT_INIT_HIGH));
 
 	if (err)
 		goto free_gpio;
include/linux/gpio.h +2 -5
index 063f71b18a7c..4af8ad114557 100644
@@ -20,12 +20,9 @@ struct device;
 #define GPIOF_DIR_OUT	(0 << 0)
 #define GPIOF_DIR_IN	(1 << 0)
 
-#define GPIOF_INIT_LOW	(0 << 1)
-#define GPIOF_INIT_HIGH	(1 << 1)
-
 #define GPIOF_IN		(GPIOF_DIR_IN)
-#define GPIOF_OUT_INIT_LOW	(GPIOF_DIR_OUT | GPIOF_INIT_LOW)
-#define GPIOF_OUT_INIT_HIGH	(GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
+#define GPIOF_OUT_INIT_LOW	(GPIOF_DIR_OUT | (0 << 1))
+#define GPIOF_OUT_INIT_HIGH	(GPIOF_DIR_OUT | (1 << 1))
 
 /* Gpio pin is active-low */
 #define GPIOF_ACTIVE_LOW        (1 << 2)
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH v1 1/2] gpiolib: legacy: Kill GPIOF_INIT_* definitions

Quoted 5 lines · Andy Shevchenko

Besides the fact that (old) drivers use wrong definitions, e.g., GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy definitions by killing those GPIOF_INIT_* completely.

Excellent, thanks Andy.

Yours,
Linus Walleij

#3 lore raw

PATCH 2/2 gpiolib: legacy: Kill GPIOF_DIR_* definitions

In reply to Andy Shevchenko

Besides the fact that (old) drivers use wrong definitions, e.g., GPIOF_DIR_IN instead of GPIOF_IN, shrink the legacy definitions by killing those GPIOF_DIR_* completely.

---
 arch/arm/mach-ep93xx/vision_ep9307.c | 3 +--
 drivers/gpio/gpiolib-legacy.c        | 2 +-
 include/linux/gpio.h                 | 9 +++------
 3 files changed, 5 insertions(+), 9 deletions(-)
arch/arm/mach-ep93xx/vision_ep9307.c +1 -2
index 02c5a4724192..85f0dd7255a9 100644
@@ -292,8 +292,7 @@ static void __init vision_init_machine(void)
 	 * Request the gpio expander's interrupt gpio line now to prevent
 	 * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
 	 */
-	if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
-				"pca9539:74"))
+	if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_IN, "pca9539:74"))
 		pr_warn("cannot request interrupt gpio for pca9539:74\n");
 
 	vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
drivers/gpio/gpiolib-legacy.c +1 -1
index 51d5fe203111..087fe3227e35 100644
@@ -43,7 +43,7 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
 	if (flags & GPIOF_ACTIVE_LOW)
 		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
 
-	if (flags & GPIOF_DIR_IN)
+	if (flags & GPIOF_IN)
 		err = gpiod_direction_input(desc);
 	else
 		err = gpiod_direction_output_raw(desc, !!(flags & GPIOF_OUT_INIT_HIGH));
include/linux/gpio.h +3 -6
index 4af8ad114557..2d105be7bbc3 100644
@@ -17,12 +17,9 @@
 struct device;
 
 /* make these flag values available regardless of GPIO kconfig options */
-#define GPIOF_DIR_OUT	(0 << 0)
-#define GPIOF_DIR_IN	(1 << 0)
-
-#define GPIOF_IN		(GPIOF_DIR_IN)
-#define GPIOF_OUT_INIT_LOW	(GPIOF_DIR_OUT | (0 << 1))
-#define GPIOF_OUT_INIT_HIGH	(GPIOF_DIR_OUT | (1 << 1))
+#define GPIOF_IN		((1 << 0))
+#define GPIOF_OUT_INIT_LOW	((0 << 0) | (0 << 1))
+#define GPIOF_OUT_INIT_HIGH	((0 << 0) | (1 << 1))
 
 /* Gpio pin is active-low */
 #define GPIOF_ACTIVE_LOW        (1 << 2)
Signature · 1 line
2.43.0.rc1.1336.g36b5255a03ac
#5 lore raw
In reply to Andy Shevchenko
Quoted 6 lines · Andy Shevchenko

Shrink the legacy API and definition surface by killing the (internal) definitions. This, in particular, will fix a couple of drivers that took it wrong.

This is assumed to go via BPIOLIB tree as this is quite small series and most of the changes related to it.

Hmm... LKP complained that it can't apply them on top of Linux Next, however I don't see any issues as my branch based on next-20240828.

Tell me if I need to resend.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer Acked-by Reviewed-by on the v1 series
#6 lore raw
In reply to Andy Shevchenko

Hi Andy,

Quoted 4 lines · Andy Shevchenko

Shrink the legacy API and definition surface by killing the (internal) definitions. This, in particular, will fix a couple of drivers that took it wrong.

Quoted 8 lines

This is assumed to go via BPIOLIB tree as this is quite small series and most of the changes related to it.

Andy Shevchenko (2):
  gpiolib: legacy: Kill GPIOF_INIT_* definitions
  gpiolib: legacy: Kill GPIOF_DIR_* definitions

 arch/arm/mach-ep93xx/vision_ep9307.c      |  6 ++----

for the mach-ep93xx part,

and in general, for the whole series,

Quoted 4 lines

 arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +- drivers/gpio/gpiolib-legacy.c             |  5 ++--- include/linux/gpio.h                      | 12 +++---------

 4 files changed, 8 insertions(+), 17 deletions(-)
Signature · 1 line
Alexander Sverdlin.
#7 lore raw
In reply to Andy Shevchenko

From: Bartosz Golaszewski <[email protected]>

Quoted 8 lines · Andy Shevchenko

Shrink the legacy API and definition surface by killing the (internal) definitions. This, in particular, will fix a couple of drivers that took it wrong.

This is assumed to go via BPIOLIB tree as this is quite small series and most of the changes related to it.

[...]

Applied, thanks!

[1/2] gpiolib: legacy: Kill GPIOF_INIT_* definitions

      commit: 4b2b0a2ce8153d65d0829e45e73bf6acdc291344
[2/2] gpiolib: legacy: Kill GPIOF_DIR_* definitions
      commit: 8c045ca534d03bab1ce4b4de49d29a36276a1e35

Best regards,

Signature · 1 line
Bartosz Golaszewski <[email protected]>