Skip to contentSkip to conversation

arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names

PATCH Applied Nishanth Menon 1 participant 2 messages Aug 30, 2024 – Sep 1, 2024

Subsystems (2)
lore
Share & tools
lore

Nishanth Menon

author maintainer
#0 lore raw

PATCH v2 1/1 arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names

Rename the pin mux and gpio-hog node names to match up with binding
rules. This fixes dtbs_check warnings:
'gpmc0-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+' 'gpio0-36' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'

While at it, change the phandle name to be consistent with the pinctrl naming.

---

Changes since V1:
* Picked up Reviewed-by
* Updated phandle name to match up with with standard pin naming.

V1: https://lore.kernel.org/linux-arm-kernel/[email protected]/

 arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso +3 -3
index f08c0e272b53..92faf762894c 100644
@@ -12,7 +12,7 @@
 #include "k3-pinctrl.h"
 
 &main_pmx0 {
-	gpmc0_pins_default: gpmc0-pins-default {
+	gpmc0_default_pins: gpmc0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */
@@ -50,7 +50,7 @@ AM64X_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (N17) GPMC0_DIR */
 };
 
 &main_gpio0 {
-	gpio0-36 {
+	gpmc0-hog {
 		bootph-all;
 		gpio-hog;
 		gpios = <36 0>;
@@ -67,7 +67,7 @@ &elm0 {
 &gpmc0 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc0_pins_default>;
+	pinctrl-0 = <&gpmc0_default_pins>;
 	#address-cells = <2>;
 	#size-cells = <1>;
 

base-commit: 20371ba120635d9ab7fc7670497105af8f33eb08

Signature · 1 line
2.46.0
author maintainer Applied
#1 lore raw

Hi Nishanth Menon,

Quoted 9 lines · Nishanth Menon

Rename the pin mux and gpio-hog node names to match up with binding
rules. This fixes dtbs_check warnings:
'gpmc0-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+' 'gpio0-36' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'

While at it, change the phandle name to be consistent with the pinctrl naming.

[...]

I have applied the following to branch ti-k3-dts-next on [1]. Thank you!

[1/1] arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names

      commit: 47ca0776e3637e8cfbf84483a0b0c22fbdf3a9f7

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git

Signature · 3 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D