arm64: dts: rockchip: add workaround for microSD card detection on Radxa ROCK 3A
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: add workaround for microSD card detection on Radxa ROCK 3A
Radxa ROCK 3A doesn't detect microSD card insertion/removal correctly. it happens from Linux v5.19 to v6.11-rc6.
add workaround (broken-cd property) to make CD work.
--- arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +2 -2
@@ -722,12 +722,12 @@ &sdhci { }; &sdmmc0 { + broken-cd; bus-width = <4>; cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; sd-uhs-sdr50; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>;
Signature · 7 lines
2.43.0 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Heiko Stübner
maintainerHi,
Am Dienstag, 3. September 2024, 10:55:50 CEST schrieb FUKAUMI Naoki:
Quoted 7 lines
Radxa ROCK 3A doesn't detect microSD card insertion/removal correctly. it happens from Linux v5.19 to v6.11-rc6.
add workaround (broken-cd property) to make CD work.
Fixes 22a442e6586c ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")Signed-off-by FUKAUMI Naoki <[email protected]>
before going for such drastic measures as broken-cd, can you describe how you checked the card insert/removal ?
I.e. in the dts node below we have both cd-gpios as well as the sdmmc0_det pinctrl which would set the pinfunc 1 ... the hw-based card detect and possibly override the cd-gpios?
What happens if you just remove the sdmmc0_det and keep the cd-gpios property?
Also, what does cat /sys/kernel/debug/gpio report after that change with inserted and removed cards?
Heiko
Quoted 14 lines
--- arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +1
-0@@ -722,12 +722,12 @@ &sdhci { }; &sdmmc0 { + broken-cd;
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts &sdhci { · line 733
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +1
-2bus-width = <4>; cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; sd-uhs-sdr50; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>;
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
hi,
Quoted 6 lines · Heiko Stübner
Hi,
Am Dienstag, 3. September 2024, 10:55:50 CEST schrieb FUKAUMI Naoki:
Quoted 3 lines
Radxa ROCK 3A doesn't detect microSD card insertion/removal correctly. it happens from Linux v5.19 to v6.11-rc6.
Quoted 7 lines
Quoted 4 lines
add workaround (broken-cd property) to make CD work.
Fixes 22a442e6586c ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")Signed-off-by FUKAUMI Naoki <[email protected]>before going for such drastic measures as broken-cd, can you describe how you checked the card insert/removal ?
basically, dmesg.
Quoted 6 lines
I.e. in the dts node below we have both cd-gpios as well as the
sdmmc0_detpinctrl which would set the pinfunc 1 ... the hw-based card detect and possibly override the cd-gpios?What happens if you just remove the
sdmmc0_detand keep the cd-gpios property?
nothing is changed if pinfunc is 0 or 1 , i.e. CD is not working both configuration.
Quoted 2 lines
Also, what does cat
/sys/kernel/debug/gpioreport after that change with inserted and removed cards?
it's always "hi".
$ sudo grep 'gpio-4 ' /sys/kernel/debug/gpio gpio-4 ( |cd ) in hi IRQ ACTIVE LOW
----
I forgot to explain about exception. only if microSD card is inserted before kernel boot, card is recognized and accessible. in this case, gpio-4 is "lo" till card is removed.
when card is removed, gpio-4 goes "hi", dmesg shows "mmc1: card 1234 removed".
after that, even if card is inserted again, gpio-4 never goes "lo", card is never detected.
btw, I usually put bootloader on microSD card. (kernel and userland are on USB-SSD) this time, I tried "boot from SPI flash", but nothing is changed.
I understand this is very strange, I'm okay if this patch is rejected. I want to know more information from other users to find out real solution.
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
Quoted 13 lines
Heiko
Quoted 11 lines
--- arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +0
-0@@ -722,12 +722,12 @@ &sdhci { };
Quoted 18 lines
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts &sdhci { · line 733
Quoted 13 lines
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +2
-2&sdmmc0 { + broken-cd; bus-width = <4>; cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; sd-uhs-sdr50; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>;
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip