scsi: ufs: ufs-qcom: add fixup_dev_quirks vops
Subsystems (3)
PATCH v3 1/1 scsi: ufs: ufs-qcom: add fixup_dev_quirks vops
Add fixup_dev_quirk vops in QCOM UFS platforms and provide an initial vendor-specific device quirk table to add UFS device specific quirks which are enabled only for specified UFS devices.
- Add DELAY_BEFORE_LPM quirk for Skhynix UFS devices to introduce a delay before VCC is powered off in QCOM platforms.
- Add DELAY_AFTER_LPM quirk for Toshiba UFS devices to introduce a delay after the VCC power rail is turned off in QCOM platforms.
- Move UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE quirk from ufs_qcom_apply_dev_quirks to ufs_qcom_dev_fixups.
---
Changes from v2:
- Addressed Mani's comments.
- Moved quirk for WDC to ufs_qcom_dev_fixups.
Changes from v2:
- Integrated Bart’s feedback and consolidated the patches into one.
--- drivers/ufs/host/ufs-qcom.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)
drivers/ufs/host/ufs-qcom.c +20 -3
@@ -828,12 +828,28 @@ static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)if (hba->dev_quirks &UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME ) err =ufs_qcom_quirk_host_pa_saveconfigtime (hba); -if (hba->dev_info.wmanufacturerid ==UFS_VENDOR_WDC ) - hba->dev_quirks |=UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE ; -return err; } +/* UFS device-specific quirks */ +static struct ufs_dev_quirk ufs_qcom_dev_fixups[] = { + { .wmanufacturerid =UFS_VENDOR_SKHYNIX , + .model =UFS_ANY_MODEL , + .quirk =UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM }, + { .wmanufacturerid =UFS_VENDOR_TOSHIBA , + .model =UFS_ANY_MODEL , + .quirk =UFS_DEVICE_QUIRK_DELAY_AFTER_LPM }, + { .wmanufacturerid =UFS_VENDOR_WDC , + .model =UFS_ANY_MODEL , + .quirk =UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE }, + {} +}; + +static void ufs_qcom_fixup_dev_quirks (struct ufs_hba *hba) +{ +ufshcd_fixup_dev_quirks (hba, ufs_qcom_dev_fixups); +} +static u32 ufs_qcom_get_ufs_hci_version (struct ufs_hba *hba) {return ufshci_version (2 ,0 );
@@ -1801,6 +1817,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { .link_startup_notify = ufs_qcom_link_startup_notify, .pwr_change_notify = ufs_qcom_pwr_change_notify, .apply_dev_quirks = ufs_qcom_apply_dev_quirks, + .fixup_dev_quirks = ufs_qcom_fixup_dev_quirks, .suspend = ufs_qcom_suspend, .resume = ufs_qcom_resume, .dbg_register_dump = ufs_qcom_dump_dbg_regs,
Signature · 1 line
2.17.1
Quoted 4 lines · Manish Pandey
Add
fixup_dev_quirkvops in QCOM UFS platforms and provide an initial vendor-specific device quirk table to add UFS device specific quirks which are enabled only for specified UFS devices.
Quoted 8 lines
- Add
DELAY_BEFORE_LPMquirk for Skhynix UFS devices to introduce a delay before VCC is powered off in QCOM platforms.
- AddDELAY_AFTER_LPMquirk for Toshiba UFS devices to introduce a delay after the VCC power rail is turned off in QCOM platforms.
- MoveUFS_DEVICE_QUIRK_HOST_PA_TACTIVATEquirk fromufs_qcom_apply_dev_quirkstoufs_qcom_dev_fixups.Signed-off-by Manish Pandey <[email protected]>
I'd still like to have these quirks in the core driver if they apply to other platforms as well. But I'll leave it up to you to check with respective device manufacturers.
- Mani
Quoted 59 lines
---
Changes from v2:
- Addressed Mani's comments.
- Moved quirk for WDC toufs_qcom_dev_fixups.Changes from v2:
- Integrated Bart’s feedback and consolidated the patches into one.--- drivers/ufs/host/ufs-qcom.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)drivers/ufs/host/ufs-qcom.c +20
-3@@ -828,12 +828,28 @@ static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)if (hba->dev_quirks &UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME ) err =ufs_qcom_quirk_host_pa_saveconfigtime (hba); -if (hba->dev_info.wmanufacturerid ==UFS_VENDOR_WDC ) - hba->dev_quirks |=UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE ; -return err; } +/* UFS device-specific quirks */ +static struct ufs_dev_quirk ufs_qcom_dev_fixups[] = { + { .wmanufacturerid =UFS_VENDOR_SKHYNIX , + .model =UFS_ANY_MODEL , + .quirk =UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM }, + { .wmanufacturerid =UFS_VENDOR_TOSHIBA , + .model =UFS_ANY_MODEL , + .quirk =UFS_DEVICE_QUIRK_DELAY_AFTER_LPM }, + { .wmanufacturerid =UFS_VENDOR_WDC , + .model =UFS_ANY_MODEL , + .quirk =UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE }, + {} +}; + +static void ufs_qcom_fixup_dev_quirks (struct ufs_hba *hba) +{ +ufshcd_fixup_dev_quirks (hba, ufs_qcom_dev_fixups); +} +static u32 ufs_qcom_get_ufs_hci_version (struct ufs_hba *hba) {return ufshci_version (2 ,0 );@@ -1801,6 +1817,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { .link_startup_notify = ufs_qcom_link_startup_notify, .pwr_change_notify = ufs_qcom_pwr_change_notify, .apply_dev_quirks = ufs_qcom_apply_dev_quirks, + .fixup_dev_quirks = ufs_qcom_fixup_dev_quirks, .suspend = ufs_qcom_suspend, .resume = ufs_qcom_resume, .dbg_register_dump = ufs_qcom_dump_dbg_regs,Signature · 1 line
2.17.1
Signature · 1 line
மணிவண்ணன் சதாசிவம்
Martin K. Petersen
AppliedManish,
Quoted 3 lines
Add
fixup_dev_quirkvops in QCOM UFS platforms and provide an initial vendor-specific device quirk table to add UFS device specific quirks which are enabled only for specified UFS devices.
Applied to 6.13/scsi-staging, thanks!
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering
Martin K. Petersen
AppliedQuoted 4 lines · Manish Pandey
Add
fixup_dev_quirkvops in QCOM UFS platforms and provide an initial vendor-specific device quirk table to add UFS device specific quirks which are enabled only for specified UFS devices.
Quoted 8 lines
- Add
DELAY_BEFORE_LPMquirk for Skhynix UFS devices to introduce a delay before VCC is powered off in QCOM platforms.
- AddDELAY_AFTER_LPMquirk for Toshiba UFS devices to introduce a delay after the VCC power rail is turned off in QCOM platforms.
- MoveUFS_DEVICE_QUIRK_HOST_PA_TACTIVATEquirk fromufs_qcom_apply_dev_quirkstoufs_qcom_dev_fixups.[...]
Applied to 6.13/scsi-queue, thanks!
[1/1] scsi: ufs: ufs-qcom: add fixup_dev_quirks vops
https://git.kernel.org/mkp/scsi/c/94c4c5d78b0f
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering