FAILED: patch "[PATCH] mptcp: pm: fullmesh: select the right ID later" failed to apply to 6.1-stable tree

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 09355f7abb9fbfc1a240be029837921ea417bf4f
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2024082640-recognize-omega-3192@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

09355f7abb9f ("mptcp: pm: fullmesh: select the right ID later") b9d69db87fb7 ("mptcp: let the in-kernel PM use mixed IPv4 and IPv6 addresses")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 09355f7abb9fbfc1a240be029837921ea417bf4f Mon Sep 17 00:00:00 2001
From: "Matthieu Baerts (NGI0)" <[email protected]>
Date: Mon, 19 Aug 2024 21:45:30 +0200
Subject: [PATCH] mptcp: pm: fullmesh: select the right ID later

When reacting upon the reception of an ADD_ADDR, the in-kernel PM first looks for fullmesh endpoints. If there are some, it will pick them, using their entry ID.

It should set the ID 0 when using the endpoint corresponding to the initial subflow, it is a special case imposed by the MPTCP specs.

Note that msk->mpc_endpoint_id might not be set when receiving the first ADD_ADDR from the server. So better to compare the addresses.

index d0a80f537fc3..a2e37ab1c40f 100644
@@ -636,6 +636,7 @@ static unsigned int fill_local_addresses_vec(struct mptcp_sock *msk,
 {
 	struct sock *sk = (struct sock *)msk;
 	struct mptcp_pm_addr_entry *entry;
+	struct mptcp_addr_info mpc_addr;
 	struct pm_nl_pernet *pernet;
 	unsigned int subflows_max;
 	int i = 0;

@@ -643,6 +644,8 @@ static unsigned int fill_local_addresses_vec(struct mptcp_sock *msk,
 	pernet = pm_nl_get_pernet_from_msk(msk);
 	subflows_max = mptcp_pm_get_subflows_max(msk);
 
+	mptcp_local_address((struct sock_common *)msk, &mpc_addr);
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(entry, &pernet->local_addr_list, list) {
 		if (!(entry->flags & MPTCP_PM_ADDR_FLAG_FULLMESH))

@@ -653,7 +656,13 @@ static unsigned int fill_local_addresses_vec(struct mptcp_sock *msk,
 
 		if (msk->pm.subflows < subflows_max) {
 			msk->pm.subflows++;
-			addrs[i++] = entry->addr;
+			addrs[i] = entry->addr;
+
+			/* Special case for ID0: set the correct ID */
+			if (mptcp_addresses_equal(&entry->addr, &mpc_addr, entry->addr.port))
+				addrs[i].id = 0;
+
+			i++;
 		}
 	}
 	rcu_read_unlock();

commit 09355f7abb9fbfc1a240be029837921ea417bf4f upstream.

When reacting upon the reception of an ADD_ADDR, the in-kernel PM first looks for fullmesh endpoints. If there are some, it will pick them, using their entry ID.

It should set the ID 0 when using the endpoint corresponding to the initial subflow, it is a special case imposed by the MPTCP specs.

Note that msk->mpc_endpoint_id might not be set when receiving the first ADD_ADDR from the server. So better to compare the addresses.

[ Conflicts in pm_netlink.c, because the new 'mpc_addr' variable is
added where the 'local' one was, before commit b9d69db87fb7 ("mptcp:
let the in-kernel PM use mixed IPv4 and IPv6 addresses"), that is not a candidate for the backports. This 'local' variable has been moved to the new place to reduce the scope, and help with possible future backports. ]

---
 net/mptcp/pm_netlink.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

index 9e16ae1b23fc..a152a3474d2c 100644
@@ -648,7 +648,7 @@ static unsigned int fill_local_addresses_vec(struct mptcp_sock *msk,
 {
 	struct sock *sk = (struct sock *)msk;
 	struct mptcp_pm_addr_entry *entry;
-	struct mptcp_addr_info local;
+	struct mptcp_addr_info mpc_addr;
 	struct pm_nl_pernet *pernet;
 	unsigned int subflows_max;
 	int i = 0;

@@ -656,6 +656,8 @@ static unsigned int fill_local_addresses_vec(struct mptcp_sock *msk,
 	pernet = pm_nl_get_pernet_from_msk(msk);
 	subflows_max = mptcp_pm_get_subflows_max(msk);
 
+	mptcp_local_address((struct sock_common *)msk, &mpc_addr);
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(entry, &pernet->local_addr_list, list) {
 		if (!(entry->flags & MPTCP_PM_ADDR_FLAG_FULLMESH))

@@ -673,7 +675,13 @@ static unsigned int fill_local_addresses_vec(struct mptcp_sock *msk,
 
 		if (msk->pm.subflows < subflows_max) {
 			msk->pm.subflows++;
-			addrs[i++] = entry->addr;
+			addrs[i] = entry->addr;
+
+			/* Special case for ID0: set the correct ID */
+			if (mptcp_addresses_equal(&entry->addr, &mpc_addr, entry->addr.port))
+				addrs[i].id = 0;
+
+			i++;
 		}
 	}
 	rcu_read_unlock();

@@ -682,6 +690,8 @@ static unsigned int fill_local_addresses_vec(struct mptcp_sock *msk,
 	 * 'IPADDRANY' local address
 	 */
 	if (!i) {
+		struct mptcp_addr_info local;
+
 		memset(&local, 0, sizeof(local));
 		local.family = msk->pm.remote.family;
 

2.45.2

Applied

This is a note to let you know that I've just added the patch titled

mptcp: pm: fullmesh: select the right ID later

to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
mptcp-pm-fullmesh-select-the-right-id-later.patch
and it can be found in the queue-6.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From [email protected] Wed Sep 4 12:58:26 2024
From: "Matthieu Baerts (NGI0)" <[email protected]>
Date: Wed, 4 Sep 2024 12:56:28 +0200
Subject: mptcp: pm: fullmesh: select the right ID later
To: [email protected], [email protected]
Cc: MPTCP Upstream <[email protected]>, "Matthieu Baerts (NGI0)" <[email protected]>, Mat Martineau <[email protected]>, Jakub Kicinski <[email protected]>
Message-ID: <[email protected]>

From: "Matthieu Baerts (NGI0)" <[email protected]>

commit 09355f7abb9fbfc1a240be029837921ea417bf4f upstream.

When reacting upon the reception of an ADD_ADDR, the in-kernel PM first looks for fullmesh endpoints. If there are some, it will pick them, using their entry ID.

It should set the ID 0 when using the endpoint corresponding to the initial subflow, it is a special case imposed by the MPTCP specs.

Note that msk->mpc_endpoint_id might not be set when receiving the first ADD_ADDR from the server. So better to compare the addresses.

[ Conflicts in pm_netlink.c, because the new 'mpc_addr' variable is
added where the 'local' one was, before commit b9d69db87fb7 ("mptcp:
let the in-kernel PM use mixed IPv4 and IPv6 addresses"), that is not a candidate for the backports. This 'local' variable has been moved to the new place to reduce the scope, and help with possible future backports. ]

---
 net/mptcp/pm_netlink.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

@@ -648,7 +648,7 @@ static unsigned int fill_local_addresses
 {
 	struct sock *sk = (struct sock *)msk;
 	struct mptcp_pm_addr_entry *entry;
-	struct mptcp_addr_info local;
+	struct mptcp_addr_info mpc_addr;
 	struct pm_nl_pernet *pernet;
 	unsigned int subflows_max;
 	int i = 0;

@@ -656,6 +656,8 @@ static unsigned int fill_local_addresses
 	pernet = pm_nl_get_pernet_from_msk(msk);
 	subflows_max = mptcp_pm_get_subflows_max(msk);
 
+	mptcp_local_address((struct sock_common *)msk, &mpc_addr);
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(entry, &pernet->local_addr_list, list) {
 		if (!(entry->flags & MPTCP_PM_ADDR_FLAG_FULLMESH))

@@ -673,7 +675,13 @@ static unsigned int fill_local_addresses
 
 		if (msk->pm.subflows < subflows_max) {
 			msk->pm.subflows++;
-			addrs[i++] = entry->addr;
+			addrs[i] = entry->addr;
+
+			/* Special case for ID0: set the correct ID */
+			if (mptcp_addresses_equal(&entry->addr, &mpc_addr, entry->addr.port))
+				addrs[i].id = 0;
+
+			i++;
 		}
 	}
 	rcu_read_unlock();

@@ -682,6 +690,8 @@ static unsigned int fill_local_addresses
 	 * 'IPADDRANY' local address
 	 */
 	if (!i) {
+		struct mptcp_addr_info local;
+
 		memset(&local, 0, sizeof(local));
 		local.family = msk->pm.remote.family;
 

Patches currently in stable-queue which might be from [email protected] are

queue-6.1/mptcp-pm-fix-rm_addr-id-for-the-initial-subflow.patch queue-6.1/selftests-mptcp-join-validate-fullmesh-endp-on-1st-sf.patch queue-6.1/mptcp-pm-fix-id-0-endp-usage-after-multiple-re-creations.patch queue-6.1/mptcp-make-pm_remove_addrs_and_subflows-static.patch queue-6.1/mptcp-pm-avoid-possible-uaf-when-selecting-endp.patch queue-6.1/mptcp-pm-reuse-id-0-after-delete-and-re-add.patch queue-6.1/selftests-mptcp-join-check-re-adding-init-endp-with-id.patch queue-6.1/selftests-mptcp-join-test-for-flush-re-add-endpoints.patch queue-6.1/selftests-mptcp-add-explicit-test-case-for-remove-re.patch queue-6.1/selftests-mptcp-add-explicit-test-case-for-remove-readd.patch queue-6.1/selftests-mptcp-join-check-re-adding-init-endp-with-.patch queue-6.1/selftests-mptcp-join-check-re-using-id-of-closed-subflow.patch queue-6.1/mptcp-pm-fullmesh-select-the-right-id-later.patch queue-6.1/mptcp-pr_debug-add-missing-n-at-the-end.patch queue-6.1/selftests-mptcp-join-check-re-using-id-of-unused-add.patch queue-6.1/selftests-mptcp-join-check-re-using-id-of-unused-add_addr.patch