Skip to contentSkip to conversation

configs/imx6ulpico: update U-Boot and kernel

PATCH In review Fabio Estevam 2 participants 3 messages Sep 4, 2024 – Sep 5, 2024 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/2 configs/imx6ulpico: update U-Boot and kernel

Update to U-Boot 2024.07 and kernel 6.6.48 versions.

The default U-Boot pico-imx6ul_defconfig causes the board to hang in SPL.

Fix it by chaging it to the more specific U-Boot
pico-pi-imx6ul_defconfig.

---
 configs/imx6ulpico_defconfig | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
configs/imx6ulpico_defconfig +6 -6
index e406d9938bdb..a77eac5c5862 100644
@@ -3,8 +3,8 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
 
-# Linux headers same as kernel, a 5.15 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
+# Linux headers same as kernel, a 6.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc5"
@@ -15,10 +15,10 @@ BR2_ROOTFS_OVERLAY="board/technexion/imx6ulpico/rootfs_overlay"
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.11"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.48"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-pico-pi imx6ul-pico-hobbit imx6ul-pico-dwarf"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6ul-pico-pi nxp/imx/imx6ul-pico-hobbit nxp/imx/imx6ul-pico-dwarf"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 
@@ -38,9 +38,9 @@ BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_TARGET_UBOOT_BOARDNAME="pico-imx6ul"
+BR2_TARGET_UBOOT_BOARDNAME="pico-pi-imx6ul"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
 
Signature · 6 lines
2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author reviewer
#1 lore raw

PATCH 2/2 configs/imx6ulpico: Also install QCA9377 firmware

Newer versions of the imx6ulpico board come populated with QCA9377 Wifi chip instad of BRCM4339.

Also install the QCA9377 firmware so that Wifi can work by default on the newer board revisions.

---
 configs/imx6ulpico_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
configs/imx6ulpico_defconfig +2 -1
index a77eac5c5862..f01ab1975227 100644
@@ -22,9 +22,10 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6ul-pico-pi nxp/imx/imx6ul-pico-hob
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 
-# wifi firmware for brcm4339
+# wifi firmware for brcm4339 and qca9377
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_10K_QCA9377=y
 
 # For automatic firmware loading
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
Signature · 6 lines
2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#2 lore raw
In reply to Fabio Estevam
Quoted 11 lines · On Wed, 4 Sep 2024 14:58:22 -0300 Fabio Estevam <[email protected]> wrote:

Update to U-Boot 2024.07 and kernel 6.6.48 versions.

The default U-Boot pico-imx6ul_defconfig causes the board to hang in SPL.

Fix it by chaging it to the more specific U-Boot
pico-pi-imx6ul_defconfig.

---
 configs/imx6ulpico_defconfig | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Series applied to next, thanks.

Thomas

Signature · 7 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot