FAILED: patch "[PATCH] selftests: mptcp: join: no extra msg if no counter" failed to apply to 6.1-stable tree

PATCH Applied [email protected] 2 participants 4 messages Aug 30, 2024 – Sep 4, 2024

Subsystems (4)

Networking Stable branch Kselftest Networking MPTCP

lore

Share & tools

lore

[email protected]

author maintainer

2024-08-30 10:27 UTC #0 lore raw

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 76a2d8394cc183df872adf04bf636eaf42746449
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2024083033-mounting-headsman-336e@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

76a2d8394cc1 ("selftests: mptcp: join: no extra msg if no counter") e7c42bf4d320 ("selftests: mptcp: use += operator to append strings") e3aae1098f10 ("selftests: mptcp: connect: fix shellcheck warnings") 61c131f5d4d2 ("selftests: mptcp: add mptcp_lib_get_counter") b850f2c7dd85 ("selftests: mptcp: add mptcp_lib_is_v6") bdbef0a6ff10 ("selftests: mptcp: add mptcp_lib_kill_wait") 757c828ce949 ("selftests: mptcp: update userspace pm test helpers") 80775412882e ("selftests: mptcp: add chk_subflows_total helper") 06848c0f341e ("selftests: mptcp: add evts_get_info helper") 629b35a225b0 ("selftests: mptcp: display simult in extra_msg") 9168ea02b898 ("selftests: mptcp: fix wait_rm_addr/sf parameters") 4d016ae42efb ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 76a2d8394cc183df872adf04bf636eaf42746449 Mon Sep 17 00:00:00 2001
From: "Matthieu Baerts (NGI0)" <[email protected]>
Date: Wed, 28 Aug 2024 08:14:31 +0200
Subject: [PATCH] selftests: mptcp: join: no extra msg if no counter

The checksum and fail counters might not be available. Then no need to display an extra message with missing info.

While at it, fix the indentation around, which is wrong since the same commit.

Fixes 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")

Cc [email protected]

Reviewed-by Geliang Tang <[email protected]>

Signed-off-by Matthieu Baerts (NGI0) <[email protected]>

Signed-off-by Paolo Abeni <[email protected]>

tools/testing/selftests/net/mptcp/mptcp_join.sh +8 -8

index 75458ade32c7..a10714b6952f 100755
@@ -1112,26 +1112,26 @@ chk_csum_nr()
 
 	print_check "sum"
 	count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtDataCsumErr")
-	if [ "$count" != "$csum_ns1" ]; then
+	if [ -n "$count" ] && [ "$count" != "$csum_ns1" ]; then
 		extra_msg+=" ns1=$count"
 	fi
 	if [ -z "$count" ]; then
 		print_skip
 	elif { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } ||
-	   { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then
+	     { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then
 		fail_test "got $count data checksum error[s] expected $csum_ns1"
 	else
 		print_ok
 	fi
 	print_check "csum"
 	count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtDataCsumErr")
-	if [ "$count" != "$csum_ns2" ]; then
+	if [ -n "$count" ] && [ "$count" != "$csum_ns2" ]; then
 		extra_msg+=" ns2=$count"
 	fi
 	if [ -z "$count" ]; then
 		print_skip
 	elif { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } ||
-	   { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then
+	     { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then
 		fail_test "got $count data checksum error[s] expected $csum_ns2"
 	else
 		print_ok

@@ -1169,13 +1169,13 @@ chk_fail_nr()
 
 	print_check "ftx"
 	count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFailTx")
-	if [ "$count" != "$fail_tx" ]; then
+	if [ -n "$count" ] && [ "$count" != "$fail_tx" ]; then
 		extra_msg+=",tx=$count"
 	fi
 	if [ -z "$count" ]; then
 		print_skip
 	elif { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } ||
-	   { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then
+	     { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then
 		fail_test "got $count MP_FAIL[s] TX expected $fail_tx"
 	else
 		print_ok

@@ -1183,13 +1183,13 @@ chk_fail_nr()
 
 	print_check "failrx"
 	count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFailRx")
-	if [ "$count" != "$fail_rx" ]; then
+	if [ -n "$count" ] && [ "$count" != "$fail_rx" ]; then
 		extra_msg+=",rx=$count"
 	fi
 	if [ -z "$count" ]; then
 		print_skip
 	elif { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } ||
-	   { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then
+	     { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then
 		fail_test "got $count MP_FAIL[s] RX expected $fail_rx"
 	else
 		print_ok

Matthieu Baerts (NGI0)

maintainer

2024-09-04 11:12 UTC #1 lore raw

PATCH 1/1 selftests: mptcp: join: no extra msg if no counter

commit 76a2d8394cc183df872adf04bf636eaf42746449 upstream.

The checksum and fail counters might not be available. Then no need to display an extra message with missing info.

While at it, fix the indentation around, which is wrong since the same commit.

Fixes 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")

Cc [email protected]

Reviewed-by Geliang Tang <[email protected]>

Signed-off-by Matthieu Baerts (NGI0) <[email protected]>

Signed-off-by Paolo Abeni <[email protected]>

[ Conflicts in mptcp_join.sh, because the context is different, but the
exact same fix can still be applied on the modified lines: adding '[ -n "$count" ]', and fixing the indentation. ]

Signed-off-by Matthieu Baerts (NGI0) <[email protected]>

---
 tools/testing/selftests/net/mptcp/mptcp_join.sh | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

tools/testing/selftests/net/mptcp/mptcp_join.sh +8 -8

index ea1c7992336d..bed980b04624 100755
@@ -1252,13 +1252,13 @@ chk_csum_nr()
 
 	printf "%-${nr_blank}s %s" " " "sum"
 	count=$(get_counter ${ns1} "MPTcpExtDataCsumErr")
-	if [ "$count" != "$csum_ns1" ]; then
+	if [ -n "$count" ] && [ "$count" != "$csum_ns1" ]; then
 		extra_msg="$extra_msg ns1=$count"
 	fi
 	if [ -z "$count" ]; then
 		echo -n "[skip]"
 	elif { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } ||
-	   { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then
+	     { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then
 		echo "[fail] got $count data checksum error[s] expected $csum_ns1"
 		fail_test
 		dump_stats=1

@@ -1267,13 +1267,13 @@ chk_csum_nr()
 	fi
 	echo -n " - csum  "
 	count=$(get_counter ${ns2} "MPTcpExtDataCsumErr")
-	if [ "$count" != "$csum_ns2" ]; then
+	if [ -n "$count" ] && [ "$count" != "$csum_ns2" ]; then
 		extra_msg="$extra_msg ns2=$count"
 	fi
 	if [ -z "$count" ]; then
 		echo -n "[skip]"
 	elif { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } ||
-	   { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then
+	     { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then
 		echo "[fail] got $count data checksum error[s] expected $csum_ns2"
 		fail_test
 		dump_stats=1

@@ -1315,13 +1315,13 @@ chk_fail_nr()
 
 	printf "%-${nr_blank}s %s" " " "ftx"
 	count=$(get_counter ${ns_tx} "MPTcpExtMPFailTx")
-	if [ "$count" != "$fail_tx" ]; then
+	if [ -n "$count" ] && [ "$count" != "$fail_tx" ]; then
 		extra_msg="$extra_msg,tx=$count"
 	fi
 	if [ -z "$count" ]; then
 		echo -n "[skip]"
 	elif { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } ||
-	   { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then
+	     { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then
 		echo "[fail] got $count MP_FAIL[s] TX expected $fail_tx"
 		fail_test
 		dump_stats=1

@@ -1331,13 +1331,13 @@ chk_fail_nr()
 
 	echo -n " - failrx"
 	count=$(get_counter ${ns_rx} "MPTcpExtMPFailRx")
-	if [ "$count" != "$fail_rx" ]; then
+	if [ -n "$count" ] && [ "$count" != "$fail_rx" ]; then
 		extra_msg="$extra_msg,rx=$count"
 	fi
 	if [ -z "$count" ]; then
 		echo -n "[skip]"
 	elif { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } ||
-	   { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then
+	     { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then
 		echo "[fail] got $count MP_FAIL[s] RX expected $fail_rx"
 		fail_test
 		dump_stats=1

Signature · 1 line

2.45.2

Greg KH

author maintainer Applied

2024-09-04 14:36 UTC #2 lore raw

Re: [PATCH 6.1.y] selftests: mptcp: join: no extra msg if no counter

Quoted 1 line · On Wed, Sep 04, 2024 at 01:12:34PM +0200, Matthieu Baerts (NGI0) wrote:

commit 76a2d8394cc183df872adf04bf636eaf42746449 upstream.

Applied

[email protected]

author maintainer Applied

2024-09-04 14:37 UTC #3 lore raw

Patch "selftests: mptcp: join: no extra msg if no counter" has been added to the 6.1-stable tree

In reply to Matthieu Baerts (NGI0)

This is a note to let you know that I've just added the patch titled

selftests: mptcp: join: no extra msg if no counter

to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
selftests-mptcp-join-no-extra-msg-if-no-counter.patch
and it can be found in the queue-6.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From [email protected] Wed Sep 4 13:14:55 2024
From: "Matthieu Baerts (NGI0)" <[email protected]>
Date: Wed, 4 Sep 2024 13:12:34 +0200
Subject: selftests: mptcp: join: no extra msg if no counter
To: [email protected], [email protected]
Cc: MPTCP Upstream <[email protected]>, "Matthieu Baerts (NGI0)" <[email protected]>, Geliang Tang <[email protected]>, Paolo Abeni <[email protected]>
Message-ID: <[email protected]>

From: "Matthieu Baerts (NGI0)" <[email protected]>

commit 76a2d8394cc183df872adf04bf636eaf42746449 upstream.

The checksum and fail counters might not be available. Then no need to display an extra message with missing info.

While at it, fix the indentation around, which is wrong since the same commit.

Fixes 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")

Cc [email protected]

Reviewed-by Geliang Tang <[email protected]>

Signed-off-by Matthieu Baerts (NGI0) <[email protected]>

Signed-off-by Paolo Abeni <[email protected]>

[ Conflicts in mptcp_join.sh, because the context is different, but the
exact same fix can still be applied on the modified lines: adding '[ -n "$count" ]', and fixing the indentation. ]

Signed-off-by Matthieu Baerts (NGI0) <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 tools/testing/selftests/net/mptcp/mptcp_join.sh |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

tools/testing/selftests/net/mptcp/mptcp_join.sh +8 -8

@@ -1252,13 +1252,13 @@ chk_csum_nr()
 
 	printf "%-${nr_blank}s %s" " " "sum"
 	count=$(get_counter ${ns1} "MPTcpExtDataCsumErr")
-	if [ "$count" != "$csum_ns1" ]; then
+	if [ -n "$count" ] && [ "$count" != "$csum_ns1" ]; then
 		extra_msg="$extra_msg ns1=$count"
 	fi
 	if [ -z "$count" ]; then
 		echo -n "[skip]"
 	elif { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } ||
-	   { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then
+	     { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then
 		echo "[fail] got $count data checksum error[s] expected $csum_ns1"
 		fail_test
 		dump_stats=1

@@ -1267,13 +1267,13 @@ chk_csum_nr()
 	fi
 	echo -n " - csum  "
 	count=$(get_counter ${ns2} "MPTcpExtDataCsumErr")
-	if [ "$count" != "$csum_ns2" ]; then
+	if [ -n "$count" ] && [ "$count" != "$csum_ns2" ]; then
 		extra_msg="$extra_msg ns2=$count"
 	fi
 	if [ -z "$count" ]; then
 		echo -n "[skip]"
 	elif { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } ||
-	   { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then
+	     { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then
 		echo "[fail] got $count data checksum error[s] expected $csum_ns2"
 		fail_test
 		dump_stats=1

@@ -1315,13 +1315,13 @@ chk_fail_nr()
 
 	printf "%-${nr_blank}s %s" " " "ftx"
 	count=$(get_counter ${ns_tx} "MPTcpExtMPFailTx")
-	if [ "$count" != "$fail_tx" ]; then
+	if [ -n "$count" ] && [ "$count" != "$fail_tx" ]; then
 		extra_msg="$extra_msg,tx=$count"
 	fi
 	if [ -z "$count" ]; then
 		echo -n "[skip]"
 	elif { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } ||
-	   { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then
+	     { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then
 		echo "[fail] got $count MP_FAIL[s] TX expected $fail_tx"
 		fail_test
 		dump_stats=1

@@ -1331,13 +1331,13 @@ chk_fail_nr()
 
 	echo -n " - failrx"
 	count=$(get_counter ${ns_rx} "MPTcpExtMPFailRx")
-	if [ "$count" != "$fail_rx" ]; then
+	if [ -n "$count" ] && [ "$count" != "$fail_rx" ]; then
 		extra_msg="$extra_msg,rx=$count"
 	fi
 	if [ -z "$count" ]; then
 		echo -n "[skip]"
 	elif { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } ||
-	   { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then
+	     { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then
 		echo "[fail] got $count MP_FAIL[s] RX expected $fail_rx"
 		fail_test
 		dump_stats=1

Patches currently in stable-queue which might be from [email protected] are

queue-6.1/mptcp-pm-fix-rm_addr-id-for-the-initial-subflow.patch queue-6.1/selftests-mptcp-join-validate-fullmesh-endp-on-1st-sf.patch queue-6.1/mptcp-pm-fix-id-0-endp-usage-after-multiple-re-creations.patch queue-6.1/mptcp-make-pm_remove_addrs_and_subflows-static.patch queue-6.1/mptcp-pm-avoid-possible-uaf-when-selecting-endp.patch queue-6.1/mptcp-pm-reuse-id-0-after-delete-and-re-add.patch queue-6.1/selftests-mptcp-join-check-re-adding-init-endp-with-id.patch queue-6.1/selftests-mptcp-join-test-for-flush-re-add-endpoints.patch queue-6.1/selftests-mptcp-add-explicit-test-case-for-remove-re.patch queue-6.1/mptcp-avoid-duplicated-sub_closed-events.patch queue-6.1/selftests-mptcp-add-explicit-test-case-for-remove-readd.patch queue-6.1/selftests-mptcp-join-check-re-adding-init-endp-with-.patch queue-6.1/selftests-mptcp-join-check-re-using-id-of-closed-subflow.patch queue-6.1/selftests-mptcp-join-check-re-re-adding-id-0-endp.patch queue-6.1/mptcp-pm-fullmesh-select-the-right-id-later.patch queue-6.1/selftests-mptcp-join-no-extra-msg-if-no-counter.patch queue-6.1/mptcp-pr_debug-add-missing-n-at-the-end.patch queue-6.1/selftests-mptcp-join-check-re-using-id-of-unused-add.patch queue-6.1/selftests-mptcp-join-check-removing-id-0-endpoint.patch queue-6.1/selftests-mptcp-join-check-re-using-id-of-unused-add_addr.patch