Introduce the lwIP network stack
Subsystems (16)
v10 cover Introduce the lwIP network stack
This is a rework of a patch series by Maxim Uvarov: "net/lwip: add lwip library for the network stack" [1]. The goal is to introduce the lwIP TCP/IP stack [2] [3] as an alternative to the current implementation in net/, selectable with Kconfig, and ultimately keep only lwIP if possible. Some reasons for doing so are:
- Make the support of HTTPS in the wget command easier. Javier T. and Raymond M. (CC'd) have some additional lwIP and Mbed TLS patches to do so. With that it becomes possible to fetch and launch a distro installer such as Debian etc. using a secure, authenticated connection directly from the U-Boot shell. Several use cases:
* Authentication: prevent MITM attack (third party replacing the
binary with a different one)
* Confidentiality: prevent third parties from grabbing a copy of the
image as it is being downloaded
* Allow connection to servers that do not support plain HTTP anymore
(this is becoming more and more common on the Internet these days)
- Possibly benefit from additional features implemented in lwIP
- Less code to maintain in U-Boot
Prior to applying this series, the lwIP stack needs to be added as a Git subtree with the following command:
$ git subtree add --squash --prefix lib/lwip/lwip \ https://github.com/lwip-tcpip/lwip.git STABLE-2_2_0_RELEASE
Notes
1. A number of features are currently incompatible with NET_LWIP: SANDBOX, DFU_TFTP, FASTBOOT, SPL_NET, CMD_PXE. All make assumptions on how the network stack is implemented and/or pull sybols that are not trivially exported from lwIP. Some interface rework may be needed.
2. Due to the above and in order to provide some level of testing in CI, a new QEMU configuration is introduced (qemu_arm64_lwip_defconfig) which is the sameas qemu_arm64_defconfig but with NET_LWIP and CMD_*_LWIP enabled. Functional tests are added to test/py/tests/test_net.py for that configuration. In addition to that, this series has some [TESTING] patches which make NET_LWIP the default and opt-out the platforms that would fail CI otherwise (~130 of them out of ~1340, among which ~100 is because of PXE).
[1] https://lore.kernel.org/all/[email protected]/
[2] https://www.nongnu.org/lwip/
[3] https://en.wikipedia.org/wiki/LwIP
Changes in v10:
- Rebase onto next
- URL for lwIP changed in cover letter: using GitHub now since all tags have suddenly disappeared from the repository on gnu.org.
- Post fixes as a separate series [1] or individual patches [2] [3]
- Add "if NET_LWIP" to net/lwip/Kconfig to fix a kconfig warning when doing the full branch build with buildman ("[NEW]")
- net/ is added to libs-y only when NET or NET_LWIP, not NO_NET
- Apply review tags
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=422079
https://lists.denx.de/pipermail/u-boot/2024-September/563904.html
[2] http://patchwork.ozlabs.org/project/uboot/list/?series=421962
[3] http://patchwork.ozlabs.org/project/uboot/list/?series=421959
Changes in v9:
- Rebased onto master, reordered commits to put some fixes that are not strictly related to lwIP first.
- New commit "test/py: test_efi_loader: add missing dependency on cmd_tftpboot" (Tom R.)
- test_efi_loader.py: add missing dependency on cmd_wget (Tom R.)
- wget: fix divide by zero when transfer takes less than 1ms (Tom R.)
- New commit "configs: use syntax CONFIG_FOO=n in tools-only_defconfig" (Tom R.)
- Make TCP_WND configurable (via CONFIG_LWIP_TCP_WND) because a large value is needed for good performance especially with latency but transfers stall in QEMU (-net user) when the value is larger than a few KB (Anton A., offlist)
- Added [TESTING] commits to run CI with NET_LWIP enabled by default except for SANDBOX and platforms that enable PXE, and fixed a number of issues:
* coreboot_defconfig: 'implicit declaration' warnings on ip_checksum_ok() and compute_ip_checksum()
* Fix EFI net tests (bootefi selftest) by adding missing push_packed() call to net_process_received_packet()
* qemu_arm64: fix test_efi_loader.py failures (skip HTTP test by default since it needs a HTTP server; fix a bug in the dhcp command which would not set the "serverip" variable)
* QEMU CI tests for r2dplus_i82557c, r2dplus_rtl8139:
Fixed receive errors due to calling free_pkt() with a length of zero. r2dplus_tulip: fixed "dm_pci_phys_to_bus:
invalid physical address" caused by too late eth_init_rings().
With that the CI status is all GREEN:
https://dev.azure.com/u-boot/u-boot/_build/results?buildId=9225&view=results
Changes in v8:
- Fix bootefi with tftp and wget. It would previously fail with an error message: "No UEFI binary known at 200000". Tested on Raspberry 3B+. Also fix the legacy wget. (Tom R.)
- wget: add "Bytes transferred =" message and accept legacy syntax for better compatibility which also makes it easier to add a test to the test suite
- wget: When no server name or address is supplied, use ${httpserverip} then ${serverip}.
- wget: start the timer used for measuring throughput when the first data block is received. In other words: do not include DNS resolution and TCP connection time in measurement. It gives better numbers ;) but more importantly is how the legacy code works.
- wget: handle non-200 result codes from the server as errors.
- tftp: when no server name or ip is supplied, use ${tftpserverip} then fall back to ${serverip}.
- New commit: "test/py: add HTTP (wget) test"
- New commit: "net: wget: removed unused function wget_success()"
- Change back all !CONFIG_IS_ENABLED(NO_NET) tests to (CONFIG_IS_ENABLED(NET) || CONFIG_IS_ENABLED(NET_LWIP)) since the NO_NET case is wrong when CONFIG_SPL_BUILD or CONFIG_TPL_BUILD is defined (Tom R.)
Changes in v7:
- Rebased onto master
- Updated binary size comparisons in this cover letter. Note that the increase for imx8mp_evk_defconfig was wrong due to a configuration error.
Changes in v6:
- Rebased on next
- "flash: prefix error codes with FL_"
Update drivers/mtd/altera_qspi.c too (Tom R.)
- "net: introduce alternative implementation as net-lwip/" Introduce a "Networking" top-level menu in the main Kconfig. Avoids having a lot of network-related symbols on the first screen of menuconfig. The "Networking stack" choice as well as the applicable symbols (depending on the selected choice) are now all inside this "Networking" menu. (Michal S.)
For PROT_DHCP_LWIP and PROT_DNS_LWIP, use "select" PROT_UDP_LWIP rather than "depends on".
Move NET_RANDOM_ETHADDR to the common ('if NET || NET_LWIP') block. Move SYS_RX_ETH_BUFFER out of 'if NET || NET_LWIP' since it is used unguarded in some code (e.g., am62x_beagleplay_r5) (Tom R.).
- "net: split include/net.h into net{,-common,-legacy,-lwip}.h" Move net_random_ethaddr() to net-common.h.
- "net: eth-uclass: add function eth_start_udev()"
Fix typo and apply Tom R.'s R-b.
- "net-lwip: add DHCP support and dhcp commmand"
Convert !CONFIG_IS_ENABLED(NET) to CONFIG_IS_ENABLED(NO_NET) in board/xilinx/common/board.c to fix an issue with device having no MAC address (thanks Michal S.). Do the same at other places (icore_mx8mp.c, imx8mp_debix_model_a.c, board/ti/am335x/board.c, tiny-printf.c).
Move CMD_MII and CMD_MDIO into 'if NET || NET_LWIP'.
- "net-lwip: add TFTP support and tftpboot command":
Fix help string.
- "net: split cmd/net.c into cmd/net.c and cmd/net-common.c":
Apply Ilias' R-b.
- "net-lwip: add TFTP_BLOCKSIZE"
Apply Ilias' R-b. I moved the TFTP_BLOCKSIZE Kconfig into this commit where it belongs (it was previously in "net" split ... net.h").
Changes in v5:
- Rebased on next
- Refactor Kconfig options to avoid duplicates
- Library functions use a more consistent naming (dhcp_loop(), ping_loop() etc.) and take a struct udevice * parameter (Heinrich S.)
- Do not use net_process_receive_packet() for input anymore. Instead of calling eth_rx() which would invoke net_process_receive_packet(), we call a new net_lwip_rx(udev) function which invokes the device recv() and pushes the packets up the lwIP stack. Thus everything is tied to a udevice now. (Heinrich S.)
- Add "configs: replace '# CONFIG_NET is not set' with CONFIG_NO_NET=y" (Tom R.)
- tftp: unify display with legacy command: add throughput, 65 hashes per line, one every 10 blocks received (Tom R.)
- Moved net-lwip/* to net/lwip/* (Simon G.)
- Rename static function low_level_output() to linkoutput() since it is the name used in the lwIP netif struct.
- Fixed off-by-one in parse_url() which could cause wget to fail when passed a URL with a host name (as opposed to a URL with an IP address).
- Improved TFTP performance by adding support for the blksize option (patches "lwip: tftp: add support of blksize option to client" and "net-lwip: add TFTP_BLOCKSIZE) (Tom R.)
- Add an optional port number to the tftp command for easier testing (syntax: tftp [[ip:[port:]]filename])
- wget: display an "unsupported URI" error if uri is not http://
(Jon H.)
- Adjusted the lwIP TCP options in lib/lwip/u-boot/lwipopts.h for better performance, in particular TCP_WND.
- Add "net: fec_mxc_init(): do not ignore return status of fec_open()"
- Set the proper environment variables when DHCP succeeds (ipaddr%d etc.) and read the proper ones for the given device in new_netif(), allowing correct behavior when several adapters are available (tested on i.MX8M Plus).
- Fix an alignment issue with outgoing packets (see the linkoutput() function). With that the i.MX8M Plus ENET1 interface works properly. (reported by Tim H.).
- Add review tags
Changes in v4:
- Fixed the DHCP algorithm which was missing a sys_timeout() call in the "fine timer" callback. This should close the issue that Tom R. reported with his Raspberry Pi 3 (it does fix it on mine).
- The DHCP exchange timeout is increased from 2 to 10 seconds
- The DHCP exchange can be interrupted with Ctrl-C.
- "net: introduce alternative implementation as net-lwip/": rework dependencies. A few symbols have 'depends on !NET_LWIP' and in addition 'NET_LWIP depends on !SANDBOX'. Sandbox, DSA and fastboot are unsupported, because they are deeply welded to the current stack.
- All network commands (dns, ping, tftp and wget):
* Get rid of global variables (Ilias A.)
* Use printf() rather than log_info()
- "net-lwip: add ping command": use packet count instead of timeout, fix code style (Ilias A.)
- Add "net: split cmd/net.c into cmd/net.c and cmd/net-common.c" extracted from the wget patch (Ilias A.).
- Add "net: split include/net.h into net{,-common,-legacy,-lwip}.h" (Ilias A.)
- Add "flash: prefix error codes with FL_" which is required to avoid name clashes when splitting net.h
- Reworked the initialization of the lwIP stack. One and only one network interface (struct netif) is added for the duration of the command that uses that interface. That's commit "net-lwip:
add DHCP support and dhcp commmand".
- Drop "test: dm: dsa, eth: disable tests when CONFIG_NET_LWIP=y", not needed now that NET_LWIP depend on !SANDBOX.
- qemu_arm64_lwip_defconfig now enables CMD_DNS and CMD_WGET (so that all the supported network commands are available).
Changes in v3:
- Make NET_LWIP a Kconfig choice in patch "net: introduce alternative implementation as net-lwip/" (Tom R.)
- Drop the patch introducing lwIP as a Git subtree and document the git command in the cover letter instead (Tom R.)
- "net-lwip: add TFTP support and tftpboot command": use the same "Bytes transferred =" message as in the legacy implementation (Tom R., Maxim U.)
- Drop "test/py: net: add _lwip variants of dhcp, ping and tftpboot tests" which is not needed anymore.
- Add missing kfree() calls in cmd/net-common.c and fix the parsing of decimal address in net-lwip/wget.c (patch "net-lwip: add wget command") (Maxim U.)
- "net-lwip: add ping command": drop the ICMP payload (Ilias A.). Set the sequence number to zero when entering ping_loop().
Changes in v2:
** Address comments from Ilias A.
- "net-lwip: add wget command"
Implement the wget_with_dns() function to do most of the wget work and call it from do_wget(). This allows to simplify patch "net-lwip: add support for EFI_HTTP_BOOT".
- "net-lwip: import net command from cmd/net.c"
Move a few functions from cmd/net.c to a new file cmd/net-common.c rather than duplicating then in cmd/net-lwip.c.
- "net-lwip: add support for EFI_HTTP_BOOT"
Since wget_with_dns() is now implemented in "net-lwip: add wget command", just enable the wget command when the lwIP stack is enabled and EFI_HTTP_BOOT is requested.
** Address comments from Tom R.
- "net-lwip: add DHCP support and dhcp commmand", "net-lwip: add TFTP support and tftpboot command", "net-lwip: add ping command",
"net-lwip: add dns command",
"net-lwip: add wget command"
Do not introduce new CMD_XXX_LWIP symbols and use existing CMD_XXX instead.
- "configs: add qemu_arm64_lwip_defconfig"
Use #include <configs/qemu_arm64_defconfig>.
- "net-lwip: import lwIP library under lib/lwip"
Patch removed and replaced by the introduction of a Git subtree:
"Squashed 'lib/lwip/lwip/' content from commit 0a0452b2c3".
Note that I have not yet addressed your comments on "test: dm: dsa,
eth: disable tests when CONFIG_NET_LWIP=y"). I need some more time for that and I think running CI on this v2 will help better understand what is needed for v3.
** Miscellaneous improvements
- "net: introduce alternative implementation as net-lwip/":
* Make DFU_OVER_TFTP not DFU_TFTP incompatible with NET_LWIP. It seems quite natural to supplement "depends on NET" with "&& !NET_LWIP".
* Make PROT_*_LWIP not visible by removing the Kconfig prompt.
Jerome Forissier (24):
Miscellaneous fixes
net: introduce alternative implementation as net-lwip/
configs: replace '# CONFIG_NET is not set' with CONFIG_NO_NET=y
net: split include/net.h into net{,-common,-legacy,-lwip}.h
net: move copy_filename() to new file net/net-common.c
net: eth-uclass: add function eth_start_udev()
net-lwip: build lwIP
net-lwip: add DHCP support and dhcp commmand
net-lwip: add TFTP support and tftpboot command
net-lwip: add ping command
net-lwip: add dns command
net: split cmd/net.c into cmd/net.c and cmd/net-common.c
net-lwip: add wget command
cmd: bdinfo: enable -e when CONFIG_CMD_NET_LWIP=y
configs: add qemu_arm64_lwip_defconfig
lwip: tftp: add support of blksize option to client
net-lwip: add TFTP_BLOCKSIZE
CI: add qemu_arm64_lwip to the test matrix
MAINTAINERS: net-lwip: add myself as a maintainer
Kconfig: fix undefined symbols (g_dnl*) when NET_LWIP is default
enabled
configs: use syntax CONFIG_FOO=n in tools-only_defconfig [TESTING] configs: set CONFIG_NET=y for FTGMAC100 [TESTING] configs: set CONFIG_NET=y when PXE is enabled [TESTING] Kconfig: enable NET_LWIP by default except for SANDBOX
Jonathan Humphreys (1):
net-lwip: lwIP wget supports user defined port in the uri, so allow
it.
.azure-pipelines.yml | 7 + Kconfig | 31 + MAINTAINERS | 11 + Makefile | 8 +- arch/arm/mach-at91/include/mach/at91_common.h | 2 +- arch/arm/mach-at91/spl_at91.c | 2 +- arch/arm/mach-at91/spl_atmel.c | 2 +- arch/arm/mach-omap2/omap3/emac.c | 1 + .../atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +- board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +- .../atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 2 +- .../sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 2 +- board/atmel/sama5d2_icp/sama5d2_icp.c | 2 +- .../atmel/sama5d2_xplained/sama5d2_xplained.c | 2 +- .../atmel/sama5d3_xplained/sama5d3_xplained.c | 2 +- board/atmel/sama5d3xek/sama5d3xek.c | 2 +- .../atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +- board/atmel/sama5d4ek/sama5d4ek.c | 2 +- board/cobra5272/flash.c | 26 +- .../conclusive/kstr-sama5d27/kstr-sama5d27.c | 2 +- board/engicam/imx8mp/icore_mx8mp.c | 2 +- board/freescale/m5253demo/flash.c | 6 +- board/gardena/smart-gateway-at91sam/spl.c | 2 +- .../imx8mp_debix_model_a.c | 2 +- board/siemens/corvus/board.c | 2 +- board/siemens/smartweb/smartweb.c | 2 +- board/siemens/taurus/taurus.c | 2 +- board/ti/am335x/board.c | 3 +- board/xilinx/common/board.c | 3 +- boot/Kconfig | 4 +- cmd/Kconfig | 131 +-- cmd/Makefile | 9 +- cmd/bdinfo.c | 5 +- cmd/elf.c | 2 +- cmd/net-common.c | 109 ++ cmd/net-lwip.c | 45 + cmd/net.c | 115 --- common/Kconfig | 3 +- common/board_r.c | 4 +- common/flash.c | 44 +- common/spl/Kconfig | 1 + common/usb_kbd.c | 2 +- configs/LicheePi_Zero_defconfig | 2 +- configs/M5249EVB_defconfig | 2 +- configs/ad401_defconfig | 1 + configs/am335x_pdu001_defconfig | 2 +- configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_qspiboot_defconfig | 1 + configs/am43xx_evm_rtconly_defconfig | 1 + configs/am43xx_evm_usbhost_boot_defconfig | 1 + configs/am43xx_hs_evm_defconfig | 1 + configs/am43xx_hs_evm_qspi_defconfig | 1 + configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/am57xx_hs_evm_usb_defconfig | 1 + configs/am62ax_evm_r5_defconfig | 2 +- configs/am62px_evm_r5_defconfig | 2 +- configs/am62x_beagleplay_r5_defconfig | 2 +- configs/amcore_defconfig | 2 +- configs/amd_versal2_mini_defconfig | 2 +- configs/amd_versal2_mini_emmc_defconfig | 2 +- configs/amd_versal2_mini_ospi_defconfig | 2 +- configs/amd_versal2_mini_qspi_defconfig | 2 +- configs/anbernic-rgxx3-rk3566_defconfig | 2 +- configs/ap143_defconfig | 2 +- configs/ap152_defconfig | 2 +- configs/apple_m1_defconfig | 2 +- configs/arndale_defconfig | 1 + configs/astro_mcf5373l_defconfig | 2 +- configs/at91sam9rlek_dataflash_defconfig | 2 +- configs/at91sam9rlek_mmc_defconfig | 2 +- configs/at91sam9rlek_nandflash_defconfig | 2 +- configs/bananapi-cm4-cm4io_defconfig | 1 + configs/bananapi-m2-pro_defconfig | 1 + configs/bananapi-m2s_defconfig | 1 + configs/bananapi-m5_defconfig | 1 + configs/bcm7260_defconfig | 2 +- configs/bcm7445_defconfig | 2 +- configs/bcm968380gerg_ram_defconfig | 2 +- configs/bcmns_defconfig | 2 +- configs/beelink-gsking-x_defconfig | 1 + configs/beelink-gt1-ultimate_defconfig | 1 + configs/beelink-gtking_defconfig | 1 + configs/beelink-gtkingpro_defconfig | 1 + configs/chromebook_samus_tpl_defconfig | 2 +- configs/clearfog_defconfig | 1 + configs/clearfog_gt_8k_defconfig | 1 + configs/clearfog_sata_defconfig | 1 + configs/clearfog_spi_defconfig | 1 + configs/cortina_presidio-asic-base_defconfig | 2 +- configs/cortina_presidio-asic-pnand_defconfig | 2 +- configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + configs/dra7xx_hs_evm_usb_defconfig | 1 + configs/durian_defconfig | 2 +- configs/e850-96_defconfig | 2 +- configs/ea-lpc3250devkitv2_defconfig | 2 +- configs/efi-x86_app32_defconfig | 2 +- configs/efi-x86_app64_defconfig | 2 +- configs/emsdp_defconfig | 2 +- configs/evb-ast2500_defconfig | 1 + configs/evb-ast2600_defconfig | 1 + configs/evb-px5_defconfig | 2 +- configs/generic-rk3568_defconfig | 2 +- configs/generic-rk3588_defconfig | 2 +- configs/hc2910_2aghd05_defconfig | 2 +- configs/helios4_defconfig | 1 + configs/igep00x0_defconfig | 2 +- configs/imx6q_bosch_acc_defconfig | 2 +- configs/imx6ulz_smm_m2_defconfig | 2 +- configs/imx8mn_var_som_defconfig | 1 + configs/iot_devkit_defconfig | 2 +- configs/j722s_evm_r5_defconfig | 2 +- configs/jethub_j100_defconfig | 1 + configs/jethub_j80_defconfig | 1 + configs/khadas-vim2_defconfig | 1 + configs/khadas-vim3_defconfig | 1 + configs/khadas-vim3l_defconfig | 1 + configs/khadas-vim_defconfig | 1 + configs/kontron-sl-mx6ul_defconfig | 1 + configs/kontron-sl-mx8mm_defconfig | 1 + configs/kontron_pitx_imx8m_defconfig | 1 + configs/kontron_sl28_defconfig | 1 + configs/legoev3_defconfig | 2 +- configs/libretech-ac_defconfig | 1 + configs/libretech-cc_defconfig | 1 + configs/libretech-cc_v2_defconfig | 1 + configs/libretech-s905d-pc_defconfig | 1 + configs/libretech-s912-pc_defconfig | 1 + configs/marsboard_defconfig | 1 + configs/mk808_defconfig | 2 +- configs/mvebu_crb_cn9130_defconfig | 1 + configs/mvebu_db_armada8k_defconfig | 1 + configs/mvebu_db_cn9130_defconfig | 1 + configs/mvebu_mcbin-88f8040_defconfig | 1 + configs/mvebu_puzzle-m801-88f8040_defconfig | 1 + configs/mx23evk_defconfig | 2 +- configs/mx28evk_defconfig | 2 +- configs/mx53cx9020_defconfig | 1 + configs/mx6cuboxi_defconfig | 1 + configs/mx6memcal_defconfig | 2 +- configs/mx6ulz_14x14_evk_defconfig | 2 +- configs/mx7dsabresd_defconfig | 1 + configs/mx7dsabresd_qspi_defconfig | 1 + configs/mx7ulp_com_defconfig | 2 +- configs/mx7ulp_evk_defconfig | 2 +- configs/mx7ulp_evk_plugin_defconfig | 2 +- configs/myir_mys_6ulx_defconfig | 1 + configs/nanopi-k2_defconfig | 1 + configs/netgear_cg3100d_ram_defconfig | 2 +- configs/novena_defconfig | 1 + configs/nsim_700_defconfig | 2 +- configs/nsim_700be_defconfig | 2 +- configs/nsim_hs38be_defconfig | 2 +- configs/odroid-c2_defconfig | 1 + configs/odroid-c4_defconfig | 1 + configs/odroid-go-ultra_defconfig | 1 + configs/odroid-hc4_defconfig | 1 + configs/odroid-n2_defconfig | 1 + configs/odroid-n2l_defconfig | 1 + configs/odroid-xu3_defconfig | 1 + configs/openpiton_riscv64_defconfig | 2 +- configs/openpiton_riscv64_spl_defconfig | 2 +- configs/origen_defconfig | 2 +- configs/p200_defconfig | 1 + configs/p201_defconfig | 1 + configs/p212_defconfig | 1 + configs/pe2201_defconfig | 2 +- configs/peach-pi_defconfig | 1 + configs/peach-pit_defconfig | 1 + configs/phycore_pcl063_defconfig | 1 + configs/pico-dwarf-imx6ul_defconfig | 1 + configs/pico-dwarf-imx7d_defconfig | 1 + configs/pico-hobbit-imx6ul_defconfig | 1 + configs/pico-hobbit-imx7d_defconfig | 1 + configs/pico-imx6ul_defconfig | 1 + configs/pico-imx7d_bl33_defconfig | 1 + configs/pico-imx7d_defconfig | 1 + configs/pico-nymph-imx7d_defconfig | 1 + configs/pico-pi-imx6ul_defconfig | 1 + configs/pico-pi-imx7d_defconfig | 1 + configs/pinecube_defconfig | 2 +- configs/pm9261_defconfig | 2 +- configs/qemu_arm64_lwip_defconfig | 10 + configs/radxa-zero2_defconfig | 1 + configs/radxa-zero_defconfig | 1 + configs/riotboard_defconfig | 1 + configs/s400_defconfig | 1 + configs/s5p4418_nanopi2_defconfig | 2 +- configs/s5p_goni_defconfig | 2 +- configs/s5pc210_universal_defconfig | 2 +- configs/sama5d27_giantboard_defconfig | 2 +- configs/sama5d29_curiosity_mmc1_defconfig | 2 +- configs/sama5d29_curiosity_mmc_defconfig | 2 +- .../sama5d29_curiosity_qspiflash_defconfig | 2 +- configs/sama7g54_curiosity_mmc_defconfig | 2 +- .../sama7g54_curiosity_nandflash_defconfig | 2 +- .../sama7g54_curiosity_qspiflash_defconfig | 2 +- configs/seeed_npi_imx6ull_defconfig | 1 + configs/sipeed_maix_bitm_defconfig | 2 +- configs/sipeed_maix_smode_defconfig | 2 +- configs/smdk5250_defconfig | 1 + configs/smdk5420_defconfig | 1 + configs/snow_defconfig | 1 + configs/spring_defconfig | 1 + configs/stemmy_defconfig | 2 +- configs/stm32f429-discovery_defconfig | 2 +- configs/stm32f429-evaluation_defconfig | 2 +- configs/stm32f469-discovery_defconfig | 2 +- configs/stm32h743-disco_defconfig | 2 +- configs/stm32h743-eval_defconfig | 2 +- configs/stm32h750-art-pi_defconfig | 2 +- configs/stm32mp25_defconfig | 2 +- configs/stmark2_defconfig | 2 +- configs/ten64_tfa_defconfig | 1 + configs/th1520_lpi4a_defconfig | 2 +- configs/thunderx_88xx_defconfig | 2 +- configs/tools-only_defconfig | 34 +- configs/topic_miami_defconfig | 2 +- configs/topic_miamilite_defconfig | 2 +- configs/topic_miamiplus_defconfig | 2 +- configs/total_compute_defconfig | 2 +- configs/trats2_defconfig | 2 +- configs/trats_defconfig | 2 +- configs/turris_mox_defconfig | 1 + configs/turris_omnia_defconfig | 1 + configs/u200_defconfig | 1 + configs/vexpress_aemv8a_juno_defconfig | 1 + configs/vexpress_aemv8a_semi_defconfig | 1 + configs/vexpress_aemv8r_defconfig | 1 + configs/vexpress_ca9x4_defconfig | 1 + configs/vexpress_fvp_defconfig | 1 + configs/videostrong-kii-pro_defconfig | 1 + configs/wandboard_defconfig | 1 + configs/wetek-core2_defconfig | 1 + configs/wetek-hub_defconfig | 1 + configs/wetek-play2_defconfig | 1 + configs/xenguest_arm64_defconfig | 2 +- configs/xenguest_arm64_virtio_defconfig | 2 +- configs/xilinx_versal_mini_defconfig | 2 +- configs/xilinx_versal_mini_emmc0_defconfig | 2 +- configs/xilinx_versal_mini_emmc1_defconfig | 2 +- configs/xilinx_versal_mini_ospi_defconfig | 2 +- configs/xilinx_versal_mini_qspi_defconfig | 2 +- configs/xilinx_versal_net_mini_defconfig | 2 +- configs/xilinx_versal_net_mini_emmc_defconfig | 2 +- configs/xilinx_versal_net_mini_ospi_defconfig | 2 +- configs/xilinx_versal_net_mini_qspi_defconfig | 2 +- configs/xilinx_zynqmp_mini_defconfig | 2 +- configs/xilinx_zynqmp_mini_emmc0_defconfig | 2 +- configs/xilinx_zynqmp_mini_emmc1_defconfig | 2 +- configs/xilinx_zynqmp_mini_nand_defconfig | 2 +- .../xilinx_zynqmp_mini_nand_single_defconfig | 2 +- configs/xilinx_zynqmp_mini_qspi_defconfig | 2 +- configs/zynq_cse_nand_defconfig | 2 +- configs/zynq_cse_nor_defconfig | 2 +- configs/zynq_cse_qspi_defconfig | 2 +- drivers/dfu/Kconfig | 2 + drivers/fastboot/Kconfig | 1 + drivers/mtd/altera_qspi.c | 4 +- drivers/mtd/cfi_flash.c | 36 +- drivers/net/Kconfig | 4 +- drivers/net/fec_mxc.c | 3 +- drivers/net/fm/eth.c | 10 +- drivers/net/phy/Kconfig | 3 +- drivers/usb/gadget/Kconfig | 3 +- include/configs/ethernut5.h | 2 - include/flash.h | 20 +- include/net-common.h | 490 +++++++++ include/net-legacy.h | 560 +++++++++++ include/net-lwip.h | 41 + include/net.h | 943 +----------------- lib/Makefile | 2 + lib/lwip/Makefile | 55 + lib/lwip/lwip/src/apps/tftp/tftp.c | 94 +- .../lwip/src/include/lwip/apps/tftp_client.h | 1 + lib/lwip/u-boot/arch/cc.h | 45 + lib/lwip/u-boot/arch/sys_arch.h | 0 lib/lwip/u-boot/limits.h | 0 lib/lwip/u-boot/lwipopts.h | 157 +++ lib/tiny-printf.c | 3 +- net/Kconfig | 81 +- net/Makefile | 20 +- net/eth-uclass.c | 38 +- net/lwip/Kconfig | 48 + net/lwip/Makefile | 8 + net/lwip/dhcp.c | 134 +++ net/lwip/dns.c | 127 +++ net/lwip/eth_internal.h | 35 + net/lwip/net-lwip.c | 302 ++++++ net/lwip/ping.c | 177 ++++ net/lwip/tftp.c | 286 ++++++ net/lwip/wget.c | 357 +++++++ net/net-common.c | 13 + net/net.c | 35 +- net/wget.c | 11 +- test/py/tests/test_efi_loader.py | 62 +- test/py/tests/test_net_boot.py | 2 +- tools/buildman/test.py | 46 + tools/buildman/toolchain.py | 6 +- 301 files changed, 3785 insertions(+), 1460 deletions(-) create mode 100644 cmd/net-common.c create mode 100644 cmd/net-lwip.c create mode 100644 configs/qemu_arm64_lwip_defconfig create mode 100644 include/net-common.h create mode 100644 include/net-legacy.h create mode 100644 include/net-lwip.h create mode 100644 lib/lwip/Makefile create mode 100644 lib/lwip/u-boot/arch/cc.h create mode 100644 lib/lwip/u-boot/arch/sys_arch.h create mode 100644 lib/lwip/u-boot/limits.h create mode 100644 lib/lwip/u-boot/lwipopts.h create mode 100644 net/lwip/Kconfig create mode 100644 net/lwip/Makefile create mode 100644 net/lwip/dhcp.c create mode 100644 net/lwip/dns.c create mode 100644 net/lwip/eth_internal.h create mode 100644 net/lwip/net-lwip.c create mode 100644 net/lwip/ping.c create mode 100644 net/lwip/tftp.c create mode 100644 net/lwip/wget.c create mode 100644 net/net-common.c
Signature · 1 line
2.40.1
PATCH v10 1/25 Miscellaneous fixes
Squashed commit of patches posted separately [1][2][3].
cmd: pxe: CMD_PXE implies CMD_TFTPBOOT
common: update: UPDATE_COMMON implies CMD_TFTPBOOT test/py: test_efi_loader: add HTTP (wget) test for the EFI loader test/py: test_efi_loader: add missing dependency on cmd_tftpboot test/py: net_boot: fix comment
net: fec_mxc_init(): do not ignore return status of fec_open()
net: wget: allow EFI boot
net: ftgmac100: depend on NET
net: phy: ncsi: depend on NET
net: wget: removed unused function wget_success()
net: fm: call dtsec_init_phy() only when it is defined
arm: omap2: add missing #include <netdev.h>
at91: rename mem_init() to at91_mem_init()
flash: prefix error codes with FL_ buildman/toolchain.py: do not set CROSS_COMPILE for sandbox
Makefile: detect HOST_ARCH properly when CROSS_COMPILE is multi-word
[1]
net: guard call to tftp_start() with IS_ENABLED(CONFIG_CMD_TFTPBOOT)
[2]
configs/ethernut5.h: define CFG_SYS_I2C_RTC_ADDR unconditionally
[3]
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=422079
[2] http://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
[3] http://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
--- Makefile | 2 +- arch/arm/mach-at91/include/mach/at91_common.h | 2 +- arch/arm/mach-at91/spl_at91.c | 2 +- arch/arm/mach-at91/spl_atmel.c | 2 +- arch/arm/mach-omap2/omap3/emac.c | 1 + .../atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +- board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +- .../atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 2 +- .../sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 2 +- board/atmel/sama5d2_icp/sama5d2_icp.c | 2 +- .../atmel/sama5d2_xplained/sama5d2_xplained.c | 2 +- .../atmel/sama5d3_xplained/sama5d3_xplained.c | 2 +- board/atmel/sama5d3xek/sama5d3xek.c | 2 +- .../atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +- board/atmel/sama5d4ek/sama5d4ek.c | 2 +- board/cobra5272/flash.c | 26 ++++---- .../conclusive/kstr-sama5d27/kstr-sama5d27.c | 2 +- board/freescale/m5253demo/flash.c | 6 +- board/gardena/smart-gateway-at91sam/spl.c | 2 +- board/siemens/corvus/board.c | 2 +- board/siemens/smartweb/smartweb.c | 2 +- board/siemens/taurus/taurus.c | 2 +- cmd/Kconfig | 1 + common/Kconfig | 1 + common/flash.c | 44 ++++++------- drivers/mtd/altera_qspi.c | 4 +- drivers/mtd/cfi_flash.c | 36 +++++------ drivers/net/Kconfig | 1 + drivers/net/fec_mxc.c | 3 +- drivers/net/fm/eth.c | 10 ++- drivers/net/phy/Kconfig | 1 + include/configs/ethernut5.h | 2 - include/flash.h | 20 +++--- net/net.c | 23 ++++--- net/wget.c | 11 ++-- test/py/tests/test_efi_loader.py | 62 ++++++++++++++----- test/py/tests/test_net_boot.py | 2 +- tools/buildman/test.py | 46 ++++++++++++++ tools/buildman/toolchain.py | 6 +- 40 files changed, 217 insertions(+), 129 deletions(-)
Makefile +1 -1
@@ -21,7 +21,7 @@ include include/host_arch.h ifeq ("", "$(CROSS_COMPILE)") MK_ARCH="${shell uname -m}" else - MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^[[:space:]]*\([^\/]*\/\)*\([^-]*\)-[^[:space:]]*/\2/p'}" + MK_ARCH="${shell echo ${lastword $(CROSS_COMPILE)} | sed -n 's/^[[:space:]]*\([^\/]*\/\)*\([^-]*\)-[^[:space:]]*/\2/p'}" endif unexport HOST_ARCH ifeq ("x86_64", $(MK_ARCH))
arch/arm/mach-at91/include/mach/at91_common.h +1 -1
@@ -28,7 +28,7 @@ void at91_pllb_init(u32 pllar);void at91_mck_init (u32 mckr);void at91_mck_init_down (u32 mckr);void at91_pmc_init (void ); -void mem_init (void ); +void at91_mem_init (void );void at91_phy_reset (void );void at91_sdram_hw_init (void );void at91_mck_init (u32 mckr);
arch/arm/mach-at91/spl_at91.c +1 -1
@@ -142,7 +142,7 @@ void board_init_f(ulong dummy)preloader_console_init ();#endif -mem_init (); +at91_mem_init ();at91_spl_board_init (); }
arch/arm/mach-at91/spl_atmel.c +1 -1
@@ -134,7 +134,7 @@ void board_init_f(ulong dummy)board_early_init_f (); -mem_init (); +at91_mem_init (); ret =spl_init ();if (ret) {
arch/arm/mach-omap2/omap3/emac.c +1 -0
@@ -9,6 +9,7 @@#include <net.h> #include <asm/io.h> #include <asm/arch/am35x_def.h> +#include <netdev.h> /* * Initializes on-chip ethernet controllers.
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +1 -1
@@ -125,7 +125,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct atmel_mpddrc_config ddr2;
board/atmel/at91sam9n12ek/at91sam9n12ek.c +1 -1
@@ -167,7 +167,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ;struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX ;
board/atmel/at91sam9x5ek/at91sam9x5ek.c +1 -1
@@ -181,7 +181,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ;struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX ;
board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c +1 -1
@@ -146,7 +146,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc) (8 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET)); } -void mem_init (void ) +void at91_mem_init (void ) {struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ;struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC ;
board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c +1 -1
@@ -208,7 +208,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc) ddrc->cal_mr4 |=ATMEL_MPDDRC_CAL_MR4_MR4R (0xFFFE ); } -void mem_init (void ) +void at91_mem_init (void ) {struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ;struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC ;
board/atmel/sama5d2_icp/sama5d2_icp.c +1 -1
@@ -180,7 +180,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc) (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET)); } -void mem_init (void ) +void at91_mem_init (void ) {struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ;struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC ;
board/atmel/sama5d2_xplained/sama5d2_xplained.c +1 -1
@@ -146,7 +146,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc) 7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ;struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC ;
board/atmel/sama5d3_xplained/sama5d3_xplained.c +1 -1
@@ -175,7 +175,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct atmel_mpddrc_config ddr2;
board/atmel/sama5d3xek/sama5d3xek.c +1 -1
@@ -241,7 +241,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct atmel_mpddrc_config ddr2;
board/atmel/sama5d4_xplained/sama5d4_xplained.c +1 -1
@@ -184,7 +184,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct atmel_mpddrc_config ddr2;
board/atmel/sama5d4ek/sama5d4ek.c +1 -1
@@ -169,7 +169,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct atmel_mpddrc_config ddr2;const struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC ;
board/cobra5272/flash.c +13 -13
@@ -135,22 +135,22 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) {ulong result;int iflag, cflag, prot, sect; -int rc =ERR_OK ; +int rc =FL_ERR_OK ;int chip1;ulong start;/* first look for protection bits */ if (info->flash_id ==FLASH_UNKNOWN ) -return ERR_UNKNOWN_FLASH_TYPE ; +return FL_ERR_UNKNOWN_FLASH_TYPE ;if ((s_first <0 ) || (s_first > s_last)) { -return ERR_INVAL ; +return FL_ERR_INVAL ; }if ((info->flash_id &FLASH_VENDMASK ) != (AMD_MANUFACT &FLASH_VENDMASK )) { -return ERR_UNKNOWN_FLASH_VENDOR ; +return FL_ERR_UNKNOWN_FLASH_VENDOR ; } prot =0 ;
@@ -160,7 +160,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) } }if (prot) -return ERR_PROTECTED ; +return FL_ERR_PROTECTED ;/* * Disable interrupts which might cause a timeout
@@ -217,11 +217,11 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)MEM_FLASH_ADDR1 =CMD_READ_ARRAY ;if (chip1 ==ERR ) { - rc =ERR_PROG_ERROR ; + rc =FL_ERR_PROG_ERROR ; goto outahere; }if (chip1 ==TMO ) { - rc =ERR_TIMEOUT ; + rc =FL_ERR_TIMEOUT ; goto outahere; }
@@ -252,7 +252,7 @@ static int write_word(flash_info_t *info, ulong dest, ulong data) {volatile u16 *addr = (volatile u16 *) dest;ulong result; -int rc =ERR_OK ; +int rc =FL_ERR_OK ;int cflag, iflag;int chip1;ulong start;
@@ -262,7 +262,7 @@ static int write_word(flash_info_t *info, ulong dest, ulong data)*/ result = *addr;if ((result & data) != data) -return ERR_NOT_ERASED ; +return FL_ERR_NOT_ERASED ;/* * Disable interrupts which might cause a timeout
@@ -302,7 +302,7 @@ static int write_word(flash_info_t *info, ulong dest, ulong data) *addr =CMD_READ_ARRAY ;if (chip1 ==ERR || *addr != data) - rc =ERR_PROG_ERROR ; + rc =FL_ERR_PROG_ERROR ;if (iflag)enable_interrupts ();
@@ -320,13 +320,13 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)if (addr &1 ) {printf ("unaligned destination not supported\n" ); -return ERR_ALIGN ; +return FL_ERR_ALIGN ; }#if 0 if (cnt &1 ) {printf ("odd transfer sizes not supported\n" ); -return ERR_ALIGN ; +return FL_ERR_ALIGN ; }#endif
@@ -364,5 +364,5 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) cnt -=1 ; } -return ERR_OK ; +return FL_ERR_OK ; }
board/conclusive/kstr-sama5d27/kstr-sama5d27.c +1 -1
@@ -182,7 +182,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc) (8 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET)); } -void mem_init (void ) +void at91_mem_init (void ) {struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ;struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC ;
board/freescale/m5253demo/flash.c +3 -3
@@ -72,7 +72,7 @@ int flash_get_offsets(ulong base, flash_info_t * info) } } -return ERR_OK ; +return FL_ERR_OK ; }void flash_print_info (flash_info_t * info)
@@ -369,9 +369,9 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) }if (cnt ==0 ) -return ERR_OK ; +return FL_ERR_OK ; -return ERR_OK ; +return FL_ERR_OK ; }/*-----------------------------------------------------------------------
board/gardena/smart-gateway-at91sam/spl.c +1 -1
@@ -110,7 +110,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX ;struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ;
board/siemens/corvus/board.c +1 -1
@@ -187,7 +187,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); } -void mem_init (void ) +void at91_mem_init (void ) {struct atmel_mpddrc_config ddr2;
board/siemens/smartweb/smartweb.c +1 -1
@@ -238,7 +238,7 @@ void at91_spl_board_init(void) | AT91_SDRAMC_TRP_VAL(2) | AT91_SDRAMC_TRCD_VAL(2) \ | AT91_SDRAMC_TRAS_VAL(5) | AT91_SDRAMC_TXSR_VAL(8)) -void mem_init (void ) +void at91_mem_init (void ) {struct at91_matrix *ma = (struct at91_matrix *)ATMEL_BASE_MATRIX ;struct at91_port *port = (struct at91_port *)ATMEL_BASE_PIOC ;
board/siemens/taurus/taurus.c +1 -1
@@ -177,7 +177,7 @@ void sdramc_configure(unsigned int mask)sdramc_initialize (ATMEL_BASE_CS1 , &setting); } -void mem_init (void ) +void at91_mem_init (void ) {unsigned int ram_size =0 ;
cmd/Kconfig +1 -0
@@ -2099,6 +2099,7 @@ config CMD_ETHSW config CMD_PXE bool "pxe" select PXE_UTILS + imply CMD_TFTPBOOT help Boot image via network using PXE protocol
common/Kconfig +1 -0
@@ -934,6 +934,7 @@ menu "Update support" config UPDATE_COMMON bool select DFU_WRITE_ALT + imply CMD_TFTPBOOT config UPDATE_TFTP bool "Auto-update using fitImage via TFTP"
common/flash.c +22 -22
97 lines not on this page · raw message
drivers/mtd/altera_qspi.c +2 -2
@@ -96,7 +96,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) ret =mtd_erase (mtd, &instr);flash_set_verbose (0 );if (ret) -return ERR_PROTECTED ; +return FL_ERR_PROTECTED ;puts (" done\n" );return 0 ;
@@ -114,7 +114,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) ret =mtd_write (mtd, to, cnt, &retlen, src);if (ret) -return ERR_PROTECTED ; +return FL_ERR_PROTECTED ;return 0 ; }
drivers/mtd/cfi_flash.c +18 -18
@@ -593,11 +593,11 @@ static int flash_status_check(flash_info_t *info, flash_sect_t sector, flash_read_long(info, sector, 0));flash_write_cmd (info, sector,0 , info->cmd_reset);udelay (1 ); -return ERR_TIMEOUT ; +return FL_ERR_TIMEOUT ; }udelay (1 );/* also triggers watchdog */ } -return ERR_OK ; +return FL_ERR_OK ; }/*-----------------------------------------------------------------------
@@ -616,9 +616,9 @@ static int flash_full_status_check(flash_info_t *info, flash_sect_t sector,case CFI_CMDSET_INTEL_PROG_REGIONS :case CFI_CMDSET_INTEL_EXTENDED :case CFI_CMDSET_INTEL_STANDARD : -if (retcode ==ERR_OK && +if (retcode ==FL_ERR_OK && !flash_isset (info, sector,0 ,FLASH_STATUS_DONE )) { - retcode =ERR_INVAL ; + retcode =FL_ERR_INVAL ;printf ("Flash %s error at address %lx\n" , prompt, info->start[sector]); if (flash_isset(info, sector, 0, FLASH_STATUS_ECLBS |
@@ -627,14 +627,14 @@ static int flash_full_status_check(flash_info_t *info, flash_sect_t sector, }else if (flash_isset (info, sector,0 ,FLASH_STATUS_ECLBS )) {puts ("Block Erase Error.\n" ); - retcode =ERR_NOT_ERASED ; + retcode =FL_ERR_NOT_ERASED ; }else if (flash_isset (info, sector,0 ,FLASH_STATUS_PSLBS )) {puts ("Locking Error\n" ); }if (flash_isset (info, sector,0 ,FLASH_STATUS_DPS )) {puts ("Block locked.\n" ); - retcode =ERR_PROTECTED ; + retcode =FL_ERR_PROTECTED ; }if (flash_isset (info, sector,0 ,FLASH_STATUS_VPENS ))puts ("Vpp Low Error.\n" );
@@ -702,12 +702,12 @@ static int flash_status_poll(flash_info_t *info, void *src, void *dst,if (get_timer (start) > tout) {printf ("Flash %s timeout at address %lx data %lx\n" , prompt, (ulong )dst, (ulong )flash_read8 (dst)); -return ERR_TIMEOUT ; +return FL_ERR_TIMEOUT ; } udelay(1); /* also triggers watchdog */ }#endif /* CONFIG_SYS_CFI_FLASH_STATUS_POLL */ -return ERR_OK ; +return FL_ERR_OK ; }/*-----------------------------------------------------------------------
@@ -810,7 +810,7 @@ static int flash_write_cfiword(flash_info_t *info, ulong dest, cfiword_t cword)break ; }if (!flag) -return ERR_NOT_ERASED ; +return FL_ERR_NOT_ERASED ;/* Disable interrupts which might cause a timeout here */ flag =disable_interrupts ();
@@ -899,7 +899,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp, shift =3 ;break ;default : - retcode =ERR_INVAL ; + retcode =FL_ERR_INVAL ; goto out_unmap; }
@@ -930,7 +930,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp, } }if (!flag) { - retcode =ERR_NOT_ERASED ; + retcode =FL_ERR_NOT_ERASED ; goto out_unmap; }
@@ -950,7 +950,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp, retcode =flash_status_check (info, sector, info->buffer_write_tout,"write to buffer" ); -if (retcode ==ERR_OK ) { +if (retcode ==FL_ERR_OK ) {/* reduce the number of loops by the width of * the port */
@@ -975,7 +975,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp, src +=8 , dst +=8 ;break ;default : - retcode =ERR_INVAL ; + retcode =FL_ERR_INVAL ; goto out_unmap; } }
@@ -1025,7 +1025,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp, }break ;default : - retcode =ERR_INVAL ; + retcode =FL_ERR_INVAL ; goto out_unmap; }
@@ -1043,7 +1043,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp,default :debug ("Unknown Command Set\n" ); - retcode =ERR_INVAL ; + retcode =FL_ERR_INVAL ;break ; }
@@ -1389,7 +1389,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)if (i > cnt) i = cnt; rc =flash_write_cfibuffer (info, wp, src, i); -if (rc !=ERR_OK ) +if (rc !=FL_ERR_OK )return rc; i -= i & (info->portwidth -1 ); wp += i;
@@ -1398,7 +1398,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)FLASH_SHOW_PROGRESS (scale, dots, digit, i);/* Only check every once in a while */ if ((cnt &0xFFFF ) < buffered_size &&ctrlc ()) - return ERR_ABORTED; + return FL_ERR_ABORTED; }#else while (cnt >= info->portwidth) {
@@ -1413,7 +1413,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)FLASH_SHOW_PROGRESS (scale, dots, digit, info->portwidth);/* Only check every once in a while */ if ((cnt &0xFFFF ) < info->portwidth &&ctrlc ()) - return ERR_ABORTED; + return FL_ERR_ABORTED; }#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
drivers/net/Kconfig +1 -0
@@ -468,6 +468,7 @@ config FTMAC100 config FTGMAC100 bool "Ftgmac100 Ethernet Support" select PHYLIB + depends on NET help This driver supports the Faraday's FTGMAC100 Gigabit SoC Ethernet controller that can be found on Aspeed SoCs (which
drivers/net/fec_mxc.c +1 -2
@@ -615,8 +615,7 @@ static int fecmxc_init(struct udevice *dev)if (fec->xcv_type !=SEVENWIRE )miiphy_restart_aneg (dev);#endif -fec_open (dev); -return 0 ; +return fec_open (dev); }/**
drivers/net/fm/eth.c +7 -3
@@ -26,7 +26,8 @@#include "fm.h" -#if defined(CONFIG_MII ) || defined(CONFIG_CMD_MII ) && !defined(BITBANGMII ) +#if ((defined(CONFIG_MII ) || defined(CONFIG_CMD_MII )) && \ + !defined(CONFIG_BITBANGMII ))#define TBIANA_SETTINGS (TBIANA_ASYMMETRIC_PAUSE | TBIANA_SYMMETRIC_PAUSE | \ TBIANA_FULL_DUPLEX)
@@ -701,8 +702,11 @@ static int init_phy(struct fm_eth *fm_eth) supported |= SUPPORTED_2500baseX_Full;#endif -if (fm_eth->type ==FM_ETH_1G_E ) -dtsec_init_phy (fm_eth); +if ((IS_ENABLED (CONFIG_MII ) ||IS_ENABLED (CONFIG_CMD_MII )) && + !IS_ENABLED (CONFIG_BITBANGMII )) { +if (fm_eth->type ==FM_ETH_1G_E ) +dtsec_init_phy (fm_eth); + }#ifdef CONFIG_PHYLIB #ifdef CONFIG_DM_MDIO
drivers/net/phy/Kconfig +1 -0
@@ -368,6 +368,7 @@ config PHY_FIXED config PHY_NCSI bool "NC-SI based PHY" + depends on NET endif #PHYLIB
include/configs/ethernut5.h +0 -2
@@ -55,9 +55,7 @@#endif /* RTC */ -#if defined(CONFIG_CMD_DATE ) || defined(CONFIG_CMD_SNTP )#define CFG_SYS_I2C_RTC_ADDR 0x51 -#endif #define I2C_SOFT_DECLARATIONS
include/flash.h +10 -10
@@ -127,16 +127,16 @@ void flash_perror(int err);/*----------------------------------------------------------------------- * return codes from flash_write(): */ -#define ERR_OK 0 -#define ERR_TIMEOUT 1 -#define ERR_NOT_ERASED 2 -#define ERR_PROTECTED 4 -#define ERR_INVAL 8 -#define ERR_ALIGN 16 -#define ERR_UNKNOWN_FLASH_VENDOR 32 -#define ERR_UNKNOWN_FLASH_TYPE 64 -#define ERR_PROG_ERROR 128 -#define ERR_ABORTED 256 +#define FL_ERR_OK 0 +#define FL_ERR_TIMEOUT 1 +#define FL_ERR_NOT_ERASED 2 +#define FL_ERR_PROTECTED 4 +#define FL_ERR_INVAL 8 +#define FL_ERR_ALIGN 16 +#define FL_ERR_UNKNOWN_FLASH_VENDOR 32 +#define FL_ERR_UNKNOWN_FLASH_TYPE 64 +#define FL_ERR_PROG_ERROR 128 +#define FL_ERR_ABORTED 256/*----------------------------------------------------------------------- * Protection Flags for flash_protect():
net/net.c +14 -9
@@ -334,17 +334,22 @@ void net_auto_load(void)net_set_state (NETLOOP_SUCCESS );return ; } -if (net_check_prereq (TFTPGET )) { -/* We aren't expecting to get a serverip, so just accept the assigned IP */ -if (IS_ENABLED (CONFIG_BOOTP_SERVERIP )) { -net_set_state (NETLOOP_SUCCESS ); - }else { -printf ("Cannot autoload with TFTPGET\n" ); -net_set_state (NETLOOP_FAIL ); +if (IS_ENABLED (CONFIG_CMD_TFTPBOOT )) { +if (net_check_prereq (TFTPGET )) { +/* +* We aren't expecting to get a serverip, so just +* accept the assigned IP +*/ +if (IS_ENABLED (CONFIG_BOOTP_SERVERIP )) { +net_set_state (NETLOOP_SUCCESS ); + }else { +printf ("Cannot autoload with TFTPGET\n" ); +net_set_state (NETLOOP_FAIL ); + } +return ; } -return ; +tftp_start (TFTPGET ); } -tftp_start (TFTPGET ); }static int net_init_loop (void )
net/wget.c +4 -7
@@ -8,6 +8,7 @@#include <command.h> #include <display_options.h> #include <env.h> +#include <efi_loader.h> #include <image.h> #include <lmb.h> #include <mapmem.h>
@@ -196,13 +197,6 @@ void wget_fail(char *error_message, unsigned int tcp_seq_num,wget_send (action, tcp_seq_num, tcp_ack_num,0 ); } -void wget_success (u8 action,unsigned int tcp_seq_num, -unsigned int tcp_ack_num,int len,int packets) -{ -printf ("Packets received %d, Transfer Successful\n" , packets); -wget_send (action, tcp_seq_num, tcp_ack_num, len); -} -/* * Interfaces of U-BOOT */
@@ -432,6 +426,9 @@ static void wget_handler(uchar *pkt, u16 dport,case WGET_TRANSFERRED :printf ("Packets received %d, Transfer Successful\n" , packets);net_set_state (wget_loop_state); +efi_set_bootdev ("Net" ,"" , image_url, +map_sysmem (image_load_addr,0 ), + net_boot_file_size);break ; } }
test/py/tests/test_efi_loader.py +47 -15
110 lines not on this page · raw message
test/py/tests/test_net_boot.py +1 -1
@@ -75,7 +75,7 @@ env__net_pxe_bootable_file = { 'check_pattern': 'ERROR', } -# False or omitted if a PXE boot test should be tested. +# False if a PXE boot test should be tested. # If PXE boot testing is not possible or desired, set this variable to True. # For example: If pxe configuration file is not proper to boot env__pxe_boot_test_skip = False
tools/buildman/test.py +46 -0
64 lines not on this page · raw message
tools/buildman/toolchain.py +4 -2
@@ -159,6 +159,8 @@ class Toolchain: if which == VAR_CROSS_COMPILE: wrapper = self.GetWrapper() base = '' if self.arch == 'sandbox' else self.path + if (base == '' and self.cross == ''): + return '' return wrapper + os.path.join(base, self.cross) elif which == VAR_PATH: return self.path
@@ -201,10 +203,10 @@ class Toolchain: if self.override_toolchain: # We'll use MakeArgs() to provide this pass - elif full_path: + elif full_path and self.cross: env[b'CROSS_COMPILE'] = tools.to_bytes( wrapper + os.path.join(self.path, self.cross)) - else: + elif self.cross: env[b'CROSS_COMPILE'] = tools.to_bytes(wrapper + self.cross) env[b'PATH'] = tools.to_bytes(self.path) + b':' + env[b'PATH']
Signature · 1 line
2.40.1
PATCH v10 2/25 net: introduce alternative implementation as net-lwip/
In reply to Jerome ForissierPrepare the introduction of the lwIP (lightweight IP) TCP/IP stack by adding a new net/lwip/ directory and the NET_LWIP symbol. Network support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent commits will introduce the lwIP code, re-work the NETDEVICE integration and port some of the NET commands and features to lwIP.
SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols that are part of NET (such as arp_init(), arp_timeout_check(), arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be added later.
Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP because of dependencies on net_loop(), tftp_timeout_ms, tftp_timeout_count_max and other NET things. Let's add a dependency on !NET_LWIP for now.
As for SANDBOX, NET_LWIP cannot be used either because of strong assumptions on the network stack. Make NET_LWIP depend on !SANDBOX so that the NET_LWIP alternative is not visible in make menuconfig when sandbox_defconfig is used.
Other adjustments to Kconfig files are made to fix "unmet direct dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when the default networking stack is set to NET_LWIP ("default NET_LWIP" instead of "default NET" in Kconfig).
--- Kconfig | 30 +++++++++++++++++++ Makefile | 2 +- boot/Kconfig | 1 + cmd/Kconfig | 1 + common/Kconfig | 2 +- common/spl/Kconfig | 1 + drivers/dfu/Kconfig | 1 + drivers/fastboot/Kconfig | 1 + drivers/net/Kconfig | 1 + drivers/net/phy/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 2 +- net/Kconfig | 61 +++++++++++++++++++------------------- net/Makefile | 4 +++ net/lwip/Kconfig | 38 ++++++++++++++++++++++++ 14 files changed, 113 insertions(+), 34 deletions(-) create mode 100644 net/lwip/Kconfig
Kconfig +30 -0
@@ -752,8 +752,38 @@ source "dts/Kconfig" source "env/Kconfig" +menu Networking + +choice + prompt "Networking stack" + default NET + +config NO_NET + bool "No networking support" + +config NET + bool "Legacy U-Boot networking stack" + imply NETDEVICES + +config NET_LWIP + bool "Use lwIP for networking stack" + imply NETDEVICES + depends on !SANDBOX + help + Include networking support based on the lwIP (lightweight IP) + TCP/IP stack (https://nongnu.org/lwip). This is a replacement for + the default U-Boot network stack and applications located in net/ + and enabled via CONFIG_NET as well as other pieces of code that + depend on CONFIG_NET (such as cmd/net.c enabled via CONFIG_CMD_NET). + Therefore the two symbols CONFIG_NET and CONFIG_NET_LWIP are mutually + exclusive. + +endchoice + source "net/Kconfig" +endmenu + source "drivers/Kconfig" source "fs/Kconfig"
Makefile +1 -1
@@ -859,7 +859,7 @@ libs-$(CONFIG_OF_EMBED) += dts/ libs-y += env/ libs-y += lib/ libs-y += fs/ -libs-y += net/ +libs-$(filter y,$(CONFIG_NET) $(CONFIG_NET_LWIP)) += net/ libs-y += disk/ libs-y += drivers/ libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
boot/Kconfig +1 -0
@@ -502,6 +502,7 @@ config BOOTMETH_ANDROID select ANDROID_BOOT_IMAGE select CMD_BCB select CMD_FASTBOOT + select FASTBOOT select PARTITION_TYPE_GUID select PARTITION_UUIDS help
cmd/Kconfig +1 -0
@@ -1651,6 +1651,7 @@ config CMD_USB config CMD_USB_SDP bool "sdp" + depends on USB_GADGET_DOWNLOAD select USB_FUNCTION_SDP help Enables the command "sdp" which is used to have U-Boot emulating the
common/Kconfig +1 -1
@@ -424,7 +424,7 @@ config LOGF_FUNC_PAD config LOG_SYSLOG bool "Log output to syslog server" - depends on NET + depends on NET || NET_LWIP help Enables a log driver which broadcasts log records via UDP port 514 to syslog servers.
common/spl/Kconfig +1 -0
@@ -1073,6 +1073,7 @@ config SPL_DM_SPI_FLASH config SPL_NET bool "Support networking" + depends on !NET_LWIP help Enable support for network devices (such as Ethernet) in SPL. This permits SPL to load U-Boot over a network link rather than
drivers/dfu/Kconfig +1 -0
@@ -20,6 +20,7 @@ config DFU_WRITE_ALT config DFU_TFTP bool "DFU via TFTP" depends on NETDEVICES + depends on !NET_LWIP select UPDATE_COMMON select DFU_OVER_TFTP help
drivers/fastboot/Kconfig +1 -0
@@ -1,5 +1,6 @@ menu "Fastboot support" depends on CMDLINE + depends on !NET_LWIP config FASTBOOT bool
drivers/net/Kconfig +1 -0
@@ -48,6 +48,7 @@ config DM_DSA bool "Enable Driver Model for DSA switches" depends on DM_MDIO depends on PHY_FIXED + depends on !NET_LWIP help Enable driver model for DSA switches
drivers/net/phy/Kconfig +1 -1
@@ -11,7 +11,7 @@ config MV88E6352_SWITCH menuconfig PHYLIB bool "Ethernet PHY (physical media interface) support" - depends on NET + depends on NET || NET_LWIP help Enable Ethernet PHY (physical media interface) support.
drivers/usb/gadget/Kconfig +1 -1
@@ -224,7 +224,7 @@ endif # USB_GADGET_DOWNLOAD config USB_ETHER bool "USB Ethernet Gadget" - depends on NET + depends on NET || NET_LWIP default y if ARCH_SUNXI && USB_MUSB_GADGET help Creates an Ethernet network device through a USB peripheral
net/Kconfig +31 -30
83 lines not on this page · raw message
net/Makefile +4 -0
@@ -5,6 +5,8 @@ #ccflags-y += -DDEBUG +ifeq ($(CONFIG_NET),y) + obj-$(CONFIG_NET) += arp.o obj-$(CONFIG_CMD_BOOTP) += bootp.o obj-$(CONFIG_CMD_CDP) += cdp.o
@@ -38,3 +40,5 @@ obj-$(CONFIG_CMD_WGET) += wget.o # sprintf(buf, index ? "foo%d" : "foo", index) # and this is intentional usage. CFLAGS_eth_common.o += -Wno-format-extra-args + +endif
net/lwip/Kconfig new file +38 -0
@@ -0,0 +1,38 @@ +# +# Network configuration (with lwIP stack) +# + +if NET_LWIP + +config LWIP_DEBUG + bool "Enable debug traces in the lwIP library" + +config LWIP_ASSERT + bool "Enable assertions in the lwIP library" + +config PROT_DHCP_LWIP + bool + select PROT_UDP_LWIP + +config PROT_DNS_LWIP + bool + select PROT_UDP_LWIP + +config PROT_RAW_LWIP + bool + +config PROT_TCP_LWIP + bool + +config PROT_TCP_SACK_LWIP + bool "TCP SACK support" + depends on PROT_TCP_LWIP + default y + help + TCP protocol with selective acknowledgements. Improves + file transfer speed in wget. + +config PROT_UDP_LWIP + bool + +endif # NET_LWIP
Signature · 1 line
2.40.1
PATCH v10 3/25 configs: replace '# CONFIG_NET is not set' with CONFIG_NO_NET=y
In reply to Jerome ForissierThe parent patch has made the networking stack a choice between NO_NET, NET and NET_LWIP. Therefore '# CONFIG_NET is not set' is now 'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly. Note that this patch is intended to be folded in but is kept separate separate for now to make review easier.
--- configs/LicheePi_Zero_defconfig | 2 +- configs/M5249EVB_defconfig | 2 +- configs/am335x_pdu001_defconfig | 2 +- configs/am62ax_evm_r5_defconfig | 2 +- configs/am62px_evm_r5_defconfig | 2 +- configs/am62x_beagleplay_r5_defconfig | 2 +- configs/amcore_defconfig | 2 +- configs/amd_versal2_mini_defconfig | 2 +- configs/amd_versal2_mini_emmc_defconfig | 2 +- configs/amd_versal2_mini_ospi_defconfig | 2 +- configs/amd_versal2_mini_qspi_defconfig | 2 +- configs/anbernic-rgxx3-rk3566_defconfig | 2 +- configs/ap143_defconfig | 2 +- configs/ap152_defconfig | 2 +- configs/apple_m1_defconfig | 2 +- configs/astro_mcf5373l_defconfig | 2 +- configs/at91sam9rlek_dataflash_defconfig | 2 +- configs/at91sam9rlek_mmc_defconfig | 2 +- configs/at91sam9rlek_nandflash_defconfig | 2 +- configs/bcm7260_defconfig | 2 +- configs/bcm7445_defconfig | 2 +- configs/bcm968380gerg_ram_defconfig | 2 +- configs/bcmns_defconfig | 2 +- configs/chromebook_samus_tpl_defconfig | 2 +- configs/cortina_presidio-asic-base_defconfig | 2 +- configs/cortina_presidio-asic-pnand_defconfig | 2 +- configs/durian_defconfig | 2 +- configs/e850-96_defconfig | 2 +- configs/ea-lpc3250devkitv2_defconfig | 2 +- configs/efi-x86_app32_defconfig | 2 +- configs/efi-x86_app64_defconfig | 2 +- configs/emsdp_defconfig | 2 +- configs/evb-px5_defconfig | 2 +- configs/generic-rk3568_defconfig | 2 +- configs/generic-rk3588_defconfig | 2 +- configs/hc2910_2aghd05_defconfig | 2 +- configs/igep00x0_defconfig | 2 +- configs/imx6q_bosch_acc_defconfig | 2 +- configs/imx6ulz_smm_m2_defconfig | 2 +- configs/iot_devkit_defconfig | 2 +- configs/j722s_evm_r5_defconfig | 2 +- configs/legoev3_defconfig | 2 +- configs/mk808_defconfig | 2 +- configs/mx23evk_defconfig | 2 +- configs/mx28evk_defconfig | 2 +- configs/mx6memcal_defconfig | 2 +- configs/mx6ulz_14x14_evk_defconfig | 2 +- configs/mx7ulp_com_defconfig | 2 +- configs/mx7ulp_evk_defconfig | 2 +- configs/mx7ulp_evk_plugin_defconfig | 2 +- configs/netgear_cg3100d_ram_defconfig | 2 +- configs/nsim_700_defconfig | 2 +- configs/nsim_700be_defconfig | 2 +- configs/nsim_hs38be_defconfig | 2 +- configs/openpiton_riscv64_defconfig | 2 +- configs/openpiton_riscv64_spl_defconfig | 2 +- configs/origen_defconfig | 2 +- configs/pe2201_defconfig | 2 +- configs/pinecube_defconfig | 2 +- configs/pm9261_defconfig | 2 +- configs/s5p4418_nanopi2_defconfig | 2 +- configs/s5p_goni_defconfig | 2 +- configs/s5pc210_universal_defconfig | 2 +- configs/sama5d27_giantboard_defconfig | 2 +- configs/sama5d29_curiosity_mmc1_defconfig | 2 +- configs/sama5d29_curiosity_mmc_defconfig | 2 +- configs/sama5d29_curiosity_qspiflash_defconfig | 2 +- configs/sama7g54_curiosity_mmc_defconfig | 2 +- configs/sama7g54_curiosity_nandflash_defconfig | 2 +- configs/sama7g54_curiosity_qspiflash_defconfig | 2 +- configs/sipeed_maix_bitm_defconfig | 2 +- configs/sipeed_maix_smode_defconfig | 2 +- configs/stemmy_defconfig | 2 +- configs/stm32f429-discovery_defconfig | 2 +- configs/stm32f429-evaluation_defconfig | 2 +- configs/stm32f469-discovery_defconfig | 2 +- configs/stm32h743-disco_defconfig | 2 +- configs/stm32h743-eval_defconfig | 2 +- configs/stm32h750-art-pi_defconfig | 2 +- configs/stm32mp25_defconfig | 2 +- configs/stmark2_defconfig | 2 +- configs/th1520_lpi4a_defconfig | 2 +- configs/thunderx_88xx_defconfig | 2 +- configs/tools-only_defconfig | 2 +- configs/topic_miami_defconfig | 2 +- configs/topic_miamilite_defconfig | 2 +- configs/topic_miamiplus_defconfig | 2 +- configs/total_compute_defconfig | 2 +- configs/trats2_defconfig | 2 +- configs/trats_defconfig | 2 +- configs/xenguest_arm64_defconfig | 2 +- configs/xenguest_arm64_virtio_defconfig | 2 +- configs/xilinx_versal_mini_defconfig | 2 +- configs/xilinx_versal_mini_emmc0_defconfig | 2 +- configs/xilinx_versal_mini_emmc1_defconfig | 2 +- configs/xilinx_versal_mini_ospi_defconfig | 2 +- configs/xilinx_versal_mini_qspi_defconfig | 2 +- configs/xilinx_versal_net_mini_defconfig | 2 +- configs/xilinx_versal_net_mini_emmc_defconfig | 2 +- configs/xilinx_versal_net_mini_ospi_defconfig | 2 +- configs/xilinx_versal_net_mini_qspi_defconfig | 2 +- configs/xilinx_zynqmp_mini_defconfig | 2 +- configs/xilinx_zynqmp_mini_emmc0_defconfig | 2 +- configs/xilinx_zynqmp_mini_emmc1_defconfig | 2 +- configs/xilinx_zynqmp_mini_nand_defconfig | 2 +- configs/xilinx_zynqmp_mini_nand_single_defconfig | 2 +- configs/xilinx_zynqmp_mini_qspi_defconfig | 2 +- configs/zynq_cse_nand_defconfig | 2 +- configs/zynq_cse_nor_defconfig | 2 +- configs/zynq_cse_qspi_defconfig | 2 +- 110 files changed, 110 insertions(+), 110 deletions(-)
configs/LicheePi_Zero_defconfig +1 -1
@@ -5,4 +5,4 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_V3S=y CONFIG_DRAM_CLK=360 # CONFIG_HAS_ARMV7_SECURE_BASE is not set -# CONFIG_NET is not set +CONFIG_NO_NET=y
configs/M5249EVB_defconfig +1 -1
@@ -22,7 +22,7 @@ CONFIG_CMD_MX_CYCLIC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y
configs/am335x_pdu001_defconfig +1 -1
@@ -41,7 +41,7 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_OF_TRANSLATE=y
configs/am62ax_evm_r5_defconfig +1 -1
@@ -68,7 +68,7 @@ CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y
configs/am62px_evm_r5_defconfig +1 -1
@@ -72,7 +72,7 @@ CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM=y CONFIG_SPL_DM_DEVICE_REMOVE=y CONFIG_SPL_DM_SEQ_ALIAS=y
configs/am62x_beagleplay_r5_defconfig +1 -1
@@ -69,7 +69,7 @@ CONFIG_SPL_OF_CONTROL=y CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y
configs/amcore_defconfig +1 -1
@@ -33,7 +33,7 @@ CONFIG_CMD_DIAG=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="AMCORE" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y
configs/amd_versal2_mini_defconfig +1 -1
@@ -62,7 +62,7 @@ CONFIG_CMD_CACHE=y # CONFIG_CMD_SLEEP is not set CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_GPIO is not set # CONFIG_I2C is not set
configs/amd_versal2_mini_emmc_defconfig +1 -1
@@ -53,7 +53,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y
configs/amd_versal2_mini_ospi_defconfig +1 -1
@@ -56,7 +56,7 @@ CONFIG_CMD_CACHE=y # CONFIG_CMD_SLEEP is not set CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_GPIO is not set # CONFIG_I2C is not set
configs/amd_versal2_mini_qspi_defconfig +1 -1
@@ -56,7 +56,7 @@ CONFIG_CMD_CACHE=y # CONFIG_CMD_SLEEP is not set CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_GPIO is not set # CONFIG_I2C is not set
configs/anbernic-rgxx3-rk3566_defconfig +1 -1
@@ -41,7 +41,7 @@ CONFIG_OF_LIVE=y # CONFIG_OF_UPSTREAM is not set CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y
configs/ap143_defconfig +1 -1
@@ -46,7 +46,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6336k CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_SPI_MAX_HZ=25000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y
configs/ap152_defconfig +1 -1
@@ -46,7 +46,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6336k CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_SPI_MAX_HZ=25000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y
configs/apple_m1_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_SYS_PBSIZE=276 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y CONFIG_CMD_SELECT_FONT=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SYS_64BIT_LBA=y CONFIG_APPLE_SPI_KEYB=y # CONFIG_MMC is not set
configs/astro_mcf5373l_defconfig +1 -1
@@ -27,7 +27,7 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_JFFS2=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_FPGA_ALTERA=y CONFIG_FPGA_CYCLON2=y CONFIG_FPGA_XILINX=y
configs/at91sam9rlek_dataflash_defconfig +1 -1
@@ -41,7 +41,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y
configs/at91sam9rlek_mmc_defconfig +1 -1
@@ -39,7 +39,7 @@ CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_FAT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y
configs/at91sam9rlek_nandflash_defconfig +1 -1
@@ -40,7 +40,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y
configs/bcm7260_defconfig +1 -1
@@ -35,7 +35,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCMSTB=y CONFIG_MTD=y
configs/bcm7445_defconfig +1 -1
@@ -37,7 +37,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCMSTB=y CONFIG_MTD=y
configs/bcm968380gerg_ram_defconfig +1 -1
@@ -41,7 +41,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_NAND=y # CONFIG_CMD_SLEEP is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_BCM6345_GPIO=y CONFIG_LED=y
configs/bcmns_defconfig +1 -1
@@ -28,7 +28,7 @@ CONFIG_CMD_CACHE=y CONFIG_OF_EMBED=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="NS" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_MTD=y CONFIG_DM_MTD=y
configs/chromebook_samus_tpl_defconfig +1 -1
@@ -74,7 +74,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set
configs/cortina_presidio-asic-base_defconfig +1 -1
@@ -31,7 +31,7 @@ CONFIG_CMD_TIMER=y CONFIG_CMD_SMC=y CONFIG_OF_CONTROL=y CONFIG_OF_LIVE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CORTINA_GPIO=y # CONFIG_MMC is not set CONFIG_DM_SERIAL=y
configs/cortina_presidio-asic-pnand_defconfig +1 -1
@@ -32,7 +32,7 @@ CONFIG_CMD_TIMER=y CONFIG_CMD_SMC=y CONFIG_OF_CONTROL=y CONFIG_OF_LIVE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CORTINA_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y
configs/durian_defconfig +1 -1
@@ -28,7 +28,7 @@ CONFIG_SYS_PROMPT="durian#" CONFIG_CMD_PCI=y CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SCSI_AHCI=y CONFIG_AHCI_PCI=y # CONFIG_MMC is not set
configs/e850-96_defconfig +1 -1
@@ -20,7 +20,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_TIME=y CONFIG_CMD_RNG=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK_EXYNOS850=y CONFIG_MMC_DW=y CONFIG_SOC_SAMSUNG=y
configs/ea-lpc3250devkitv2_defconfig +1 -1
@@ -25,7 +25,7 @@ CONFIG_SYS_PROMPT="EA-LPC3250v2=> " CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_OF_CONTROL=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_LPC32XX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_LPC32XX=y
configs/efi-x86_app32_defconfig +1 -1
@@ -35,7 +35,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_GZIP is not set
configs/efi-x86_app64_defconfig +1 -1
@@ -38,7 +38,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_CONSOLE_SCROLL_LINES=5
configs/emsdp_defconfig +1 -1
@@ -30,7 +30,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="app.bin" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_SNPS=y
configs/evb-px5_defconfig +1 -1
@@ -57,7 +57,7 @@ CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent" CONFIG_TPL_OF_PLATDATA=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_TPL_DM=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y
configs/generic-rk3568_defconfig +1 -1
@@ -40,7 +40,7 @@ CONFIG_OF_LIVE=y # CONFIG_OF_UPSTREAM is not set CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y
configs/generic-rk3588_defconfig +1 -1
@@ -35,7 +35,7 @@ CONFIG_OF_LIVE=y # CONFIG_OF_UPSTREAM is not set CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y
configs/hc2910_2aghd05_defconfig +1 -1
@@ -36,7 +36,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_PARTITION_TYPE_GUID=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_GPIO is not set # CONFIG_I2C is not set # CONFIG_INPUT is not set
configs/igep00x0_defconfig +1 -1
@@ -60,7 +60,7 @@ CONFIG_ENV_UBI_VOLUME="config" CONFIG_ENV_UBI_VOLUME_REDUND="config_r" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
configs/imx6q_bosch_acc_defconfig +1 -1
@@ -81,7 +81,7 @@ CONFIG_SYS_MMC_ENV_PART=1 CONFIG_ENV_WRITEABLE_LIST=y CONFIG_ENV_ACCESS_IGNORE_FORCE=y CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y
configs/imx6ulz_smm_m2_defconfig +1 -1
@@ -42,7 +42,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_BOUNCE_BUFFER=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x82000000
configs/iot_devkit_defconfig +1 -1
@@ -34,7 +34,7 @@ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="app.bin" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_SNPS=y
configs/j722s_evm_r5_defconfig +1 -1
@@ -72,7 +72,7 @@ CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM=y CONFIG_SPL_DM_DEVICE_REMOVE=y CONFIG_SPL_DM_SEQ_ALIAS=y
configs/legoev3_defconfig +1 -1
@@ -44,7 +44,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_I2C=y CONFIG_SYS_I2C_DAVINCI=y
configs/mk808_defconfig +1 -1
@@ -68,7 +68,7 @@ CONFIG_OF_DTB_PROPS_REMOVE=y CONFIG_SPL_OF_PLATDATA=y CONFIG_TPL_OF_PLATDATA=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_TPL_DM=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y
configs/mx23evk_defconfig +1 -1
@@ -41,7 +41,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_MXS_GPIO=y CONFIG_MMC_MXS=y CONFIG_PINCTRL=y
configs/mx28evk_defconfig +1 -1
@@ -47,7 +47,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM=y CONFIG_MXS_GPIO=y CONFIG_MMC_MXS=y
configs/mx6memcal_defconfig +1 -1
@@ -38,7 +38,7 @@ CONFIG_CMD_MEMTEST=y CONFIG_CMD_CACHE=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_BOUNCE_BUFFER=y # CONFIG_MMC is not set CONFIG_FSL_USDHC=y
configs/mx6ulz_14x14_evk_defconfig +1 -1
@@ -36,7 +36,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_BOUNCE_BUFFER=y CONFIG_DM_74X164=y CONFIG_DM_I2C=y
configs/mx7ulp_com_defconfig +1 -1
@@ -33,7 +33,7 @@ CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_BOUNCE_BUFFER=y CONFIG_IMX_RGPIO2P=y # CONFIG_MXC_GPIO is not set
configs/mx7ulp_evk_defconfig +1 -1
@@ -33,7 +33,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_BOUNCE_BUFFER=y CONFIG_IMX_RGPIO2P=y # CONFIG_MXC_GPIO is not set
configs/mx7ulp_evk_plugin_defconfig +1 -1
@@ -31,7 +31,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_BOUNCE_BUFFER=y CONFIG_IMX_RGPIO2P=y # CONFIG_MXC_GPIO is not set
configs/netgear_cg3100d_ram_defconfig +1 -1
@@ -39,7 +39,7 @@ CONFIG_CMD_MEMINFO=y CONFIG_CMD_SPI=y # CONFIG_CMD_SLEEP is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_BCM6345_GPIO=y CONFIG_LED=y
configs/nsim_700_defconfig +1 -1
@@ -25,7 +25,7 @@ CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y
configs/nsim_700be_defconfig +1 -1
@@ -26,7 +26,7 @@ CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y
configs/nsim_hs38be_defconfig +1 -1
@@ -27,7 +27,7 @@ CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y
configs/openpiton_riscv64_defconfig +1 -1
@@ -61,7 +61,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y # CONFIG_DOS_PARTITION is not set CONFIG_OF_EMBED=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CPU=y CONFIG_MMC=y # CONFIG_MMC_WRITE is not set
configs/openpiton_riscv64_spl_defconfig +1 -1
@@ -77,7 +77,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y # CONFIG_DOS_PARTITION is not set # CONFIG_SPL_PARTITION_UUIDS is not set -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CPU=y CONFIG_MMC=y # CONFIG_MMC_WRITE is not set
configs/origen_defconfig +1 -1
@@ -41,7 +41,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DFU_MMC=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x2000000 CONFIG_MMC_DW=y
configs/pe2201_defconfig +1 -1
@@ -27,7 +27,7 @@ CONFIG_CMD_DM=y CONFIG_CMD_PCI=y CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SCSI_AHCI=y CONFIG_AHCI_PCI=y # CONFIG_MMC is not set
configs/pinecube_defconfig +1 -1
@@ -9,7 +9,7 @@ CONFIG_DRAM_ODT_EN=y CONFIG_I2C0_ENABLE=y # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_SPL_I2C=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f
configs/pm9261_defconfig +1 -1
@@ -37,7 +37,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env) CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y
configs/s5p4418_nanopi2_defconfig +1 -1
@@ -49,7 +49,7 @@ CONFIG_CMD_FAT=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_MMC_ENV_DEV=2 -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_NEXELL=y CONFIG_MMC_DW=y
configs/s5p_goni_defconfig +1 -1
@@ -44,7 +44,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DFU_MMC=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x2000000 CONFIG_DM_I2C_GPIO=y
configs/s5pc210_universal_defconfig +1 -1
@@ -41,7 +41,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DFU_MMC=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x2000000 CONFIG_SYS_I2C_S3C24X0=y
configs/sama5d27_giantboard_defconfig +1 -1
@@ -64,7 +64,7 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" CONFIG_ENV_IS_IN_FAT=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_CLK=y
configs/sama5d29_curiosity_mmc1_defconfig +1 -1
@@ -70,7 +70,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="SAMA5D29" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_UTMI=y
configs/sama5d29_curiosity_mmc_defconfig +1 -1
@@ -69,7 +69,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="SAMA5D29" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_UTMI=y
configs/sama5d29_curiosity_qspiflash_defconfig +1 -1
@@ -69,7 +69,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="SAMA5D29" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_UTMI=y
configs/sama7g54_curiosity_mmc_defconfig +1 -1
@@ -74,7 +74,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="SAMA7G54" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y
configs/sama7g54_curiosity_nandflash_defconfig +1 -1
@@ -72,7 +72,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="SAMA7G54" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y
configs/sama7g54_curiosity_qspiflash_defconfig +1 -1
@@ -73,7 +73,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="SAMA7G54" CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y
configs/sipeed_maix_bitm_defconfig +1 -1
@@ -17,7 +17,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_MTDIDS_DEFAULT="nor0=spi3:0" CONFIG_MTDPARTS_DEFAULT="nor0:1M(u-boot),0x1000@0xfff000(env)" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK_K210_SET_RATE=y # CONFIG_INPUT is not set CONFIG_SF_DEFAULT_BUS=3
configs/sipeed_maix_smode_defconfig +1 -1
@@ -18,7 +18,7 @@ CONFIG_SYS_PBSIZE=276 CONFIG_HUSH_PARSER=y CONFIG_MTDIDS_DEFAULT="nor0=spi3:0" CONFIG_MTDPARTS_DEFAULT="nor0:1M(u-boot),0x1000@0xfff000(env)" -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_INPUT is not set CONFIG_SF_DEFAULT_BUS=3 CONFIG_FS_EXT4=y
configs/stemmy_defconfig +1 -1
@@ -28,7 +28,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_GETTIME=y CONFIG_EFI_PARTITION=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x18100000 CONFIG_FASTBOOT_FLASH=y
configs/stm32f429-discovery_defconfig +1 -1
@@ -27,7 +27,7 @@ CONFIG_CMD_IMLS=y CONFIG_CMD_TIMER=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_FLASH=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y
configs/stm32f429-evaluation_defconfig +1 -1
@@ -25,7 +25,7 @@ CONFIG_CMD_TIMER=y # CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_ARM_PL180_MMCI=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y
configs/stm32f469-discovery_defconfig +1 -1
@@ -26,7 +26,7 @@ CONFIG_CMD_TIMER=y # CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_ARM_PL180_MMCI=y CONFIG_MTD=y CONFIG_DM_MTD=y
configs/stm32h743-disco_defconfig +1 -1
@@ -30,6 +30,6 @@ CONFIG_CMD_EXT4_WRITE=y # CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_STM32_SDMMC2=y # CONFIG_PINCTRL_FULL is not set
configs/stm32h743-eval_defconfig +1 -1
@@ -30,6 +30,6 @@ CONFIG_CMD_EXT4_WRITE=y # CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_STM32_SDMMC2=y # CONFIG_PINCTRL_FULL is not set
configs/stm32h750-art-pi_defconfig +1 -1
@@ -36,7 +36,7 @@ CONFIG_CMD_EXT4_WRITE=y # CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DM_DMA=y CONFIG_STM32_SDMMC2=y # CONFIG_PINCTRL_FULL is not set
configs/stm32mp25_defconfig +1 -1
@@ -31,7 +31,7 @@ CONFIG_CMD_TIMER=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_LOG=y CONFIG_OF_LIVE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_GPIO_HOG=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y
configs/stmark2_defconfig +1 -1
@@ -39,7 +39,7 @@ CONFIG_ENV_SPI_CS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="stmark2" -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_FSL=y CONFIG_MTD=y
configs/th1520_lpi4a_defconfig +1 -1
@@ -58,7 +58,7 @@ CONFIG_CMD_BOOTMENU=y CONFIG_PARTITION_TYPE_GUID=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_VERSION_VARIABLE=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_BLOCK_CACHE is not set # CONFIG_GPIO is not set # CONFIG_I2C is not set
configs/thunderx_88xx_defconfig +1 -1
@@ -32,7 +32,7 @@ CONFIG_SYS_PROMPT="ThunderX_88XX> " # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_MMC is not set CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SKIP_INIT=y
configs/tools-only_defconfig +1 -1
@@ -22,7 +22,7 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd" # CONFIG_CMD_DATE is not set CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_ACPIGEN is not set CONFIG_AXI=y CONFIG_AXI_SANDBOX=y
configs/topic_miami_defconfig +1 -1
@@ -52,7 +52,7 @@ CONFIG_CMD_CACHE=y CONFIG_OF_EMBED=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_RAM=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x600000
configs/topic_miamilite_defconfig +1 -1
@@ -52,7 +52,7 @@ CONFIG_CMD_CACHE=y CONFIG_OF_EMBED=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_RAM=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x600000
configs/topic_miamiplus_defconfig +1 -1
@@ -52,7 +52,7 @@ CONFIG_CMD_CACHE=y CONFIG_OF_EMBED=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_RAM=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x600000
configs/total_compute_defconfig +1 -1
@@ -43,7 +43,7 @@ CONFIG_CMD_AVB=y CONFIG_CMD_UBI=y # CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_CLK=y # CONFIG_MMC_WRITE is not set CONFIG_ARM_PL180_MMCI=y
configs/trats2_defconfig +1 -1
@@ -43,7 +43,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DFU_MMC=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x2000000 CONFIG_DM_I2C_GPIO=y
configs/trats_defconfig +1 -1
@@ -42,7 +42,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -# CONFIG_NET is not set +CONFIG_NO_NET=y CONFIG_DFU_MMC=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x2000000 CONFIG_DM_I2C_GPIO=y
configs/xenguest_arm64_defconfig +1 -1
@@ -37,7 +37,7 @@ CONFIG_CMD_PVBLOCK=y # CONFIG_CMD_SLEEP is not set CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_MMC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_DM_SERIAL=y
configs/xenguest_arm64_virtio_defconfig +1 -1
@@ -42,7 +42,7 @@ CONFIG_CMD_PCI=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_PARTITION_TYPE_GUID=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_MMC is not set CONFIG_DM_PCI_COMPAT=y CONFIG_PCI_REGION_MULTI_ENTRY=y
configs/xilinx_versal_mini_defconfig +1 -1
@@ -57,7 +57,7 @@ CONFIG_SYS_ALT_MEMTEST=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_SLEEP is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_MMC is not set CONFIG_ARM_DCC=y
configs/xilinx_versal_mini_emmc0_defconfig +1 -1
@@ -55,7 +55,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/xilinx_versal_mini_emmc1_defconfig +1 -1
@@ -55,7 +55,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/xilinx_versal_mini_ospi_defconfig +1 -1
@@ -51,7 +51,7 @@ CONFIG_SYS_PROMPT="Versal> " # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_MMC is not set CONFIG_MTD=y
configs/xilinx_versal_mini_qspi_defconfig +1 -1
@@ -53,7 +53,7 @@ CONFIG_SYS_PROMPT="Versal> " # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG is not set -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_GPIO is not set # CONFIG_I2C is not set
configs/xilinx_versal_net_mini_defconfig +1 -1
@@ -61,7 +61,7 @@ CONFIG_CMD_CACHE=y # CONFIG_CMD_SLEEP is not set CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_GPIO is not set # CONFIG_I2C is not set
configs/xilinx_versal_net_mini_emmc_defconfig +1 -1
@@ -50,7 +50,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y
configs/xilinx_versal_net_mini_ospi_defconfig +1 -1
@@ -50,7 +50,7 @@ CONFIG_SYS_PROMPT="Versal NET> " # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_MMC is not set CONFIG_MTD=y
configs/xilinx_versal_net_mini_qspi_defconfig +1 -1
@@ -52,7 +52,7 @@ CONFIG_SYS_PROMPT="Versal NET> " # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG is not set -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_GPIO is not set # CONFIG_I2C is not set
configs/xilinx_zynqmp_mini_defconfig +1 -1
@@ -53,7 +53,7 @@ CONFIG_CMD_CACHE=y # CONFIG_CMD_SLEEP is not set CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_DM_MAILBOX is not set # CONFIG_MMC is not set
configs/xilinx_zynqmp_mini_emmc0_defconfig +1 -1
@@ -64,7 +64,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_DM_MAILBOX is not set
configs/xilinx_zynqmp_mini_emmc1_defconfig +1 -1
@@ -64,7 +64,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_DM_MAILBOX is not set
configs/xilinx_zynqmp_mini_nand_defconfig +1 -1
@@ -48,7 +48,7 @@ CONFIG_CLOCKS=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_DM_MAILBOX is not set # CONFIG_MMC is not set
configs/xilinx_zynqmp_mini_nand_single_defconfig +1 -1
@@ -48,7 +48,7 @@ CONFIG_CLOCKS=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_DM_MAILBOX is not set # CONFIG_MMC is not set
configs/xilinx_zynqmp_mini_qspi_defconfig +1 -1
@@ -67,7 +67,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_FIRMWARE is not set
configs/zynq_cse_nand_defconfig +1 -1
@@ -69,7 +69,7 @@ CONFIG_SYS_MAXARGS=32 CONFIG_OF_EMBED=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_MMC is not set
configs/zynq_cse_nor_defconfig +1 -1
@@ -69,7 +69,7 @@ CONFIG_SYS_MAXARGS=32 CONFIG_OF_EMBED=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_MMC is not set
configs/zynq_cse_qspi_defconfig +1 -1
@@ -78,7 +78,7 @@ CONFIG_SYS_MAXARGS=32 CONFIG_OF_EMBED=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set +CONFIG_NO_NET=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_MMC is not set
Signature · 1 line
2.40.1
PATCH v10 4/25 net: split include/net.h into net{, -common, -legacy, -lwip}.h
In reply to Jerome ForissierMake net.h a wrapper which includes net-common.h and either net-legacy.h or net-lwip.h based on NET_LWIP.
--- Makefile | 4 +- include/net-common.h | 485 ++++++++++++++++++++++ include/net-legacy.h | 560 +++++++++++++++++++++++++ include/net-lwip.h | 14 + include/net.h | 943 +------------------------------------------ 5 files changed, 1066 insertions(+), 940 deletions(-) create mode 100644 include/net-common.h create mode 100644 include/net-legacy.h create mode 100644 include/net-lwip.h
Makefile +3 -1
@@ -836,7 +836,9 @@ UBOOTINCLUDE := \ -I$(srctree)/arch/arm/thumb1/include)) \ -I$(srctree)/arch/$(ARCH)/include \ -include $(srctree)/include/linux/kconfig.h \ - -I$(srctree)/dts/upstream/include + -I$(srctree)/dts/upstream/include \ + $(if $(CONFIG_NET_LWIP), -I$(srctree)/lib/lwip/lwip/src/include \ + -I$(srctree)/lib/lwip/u-boot) NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
include/net-common.h new file +485 -0
485 lines not on this page · raw message
include/net-legacy.h new file +560 -0
560 lines not on this page · raw message
include/net-lwip.h new file +14 -0
@@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __NET_LWIP_H__ +#define __NET_LWIP_H__ + +#include <lwip/ip4.h> +#include <lwip/netif.h> + +struct netif *net_lwip_new_netif (struct udevice *udev); +struct netif *net_lwip_new_netif_noip (struct udevice *udev); +void net_lwip_remove_netif (struct netif *netif); +struct netif *net_lwip_get_netif (void ); + +#endif /* __NET_LWIP_H__ */
include/net.h +4 -939
953 lines not on this page · raw message
Signature · 1 line
2.40.1
PATCH v10 5/25 net: move copy_filename() to new file net/net-common.c
In reply to Jerome Forissiercopy_filename() can be useful when NET_LWIP is enabled, therefore move it out of net/net.c which is built only when networking choice is NET.
--- net/Makefile | 2 ++ net/net-common.c | 13 +++++++++++++ net/net.c | 12 ------------ 3 files changed, 15 insertions(+), 12 deletions(-) create mode 100644 net/net-common.c
net/Makefile +2 -0
@@ -42,3 +42,5 @@ obj-$(CONFIG_CMD_WGET) += wget.o CFLAGS_eth_common.o += -Wno-format-extra-args endif + +obj-y += net-common.o
net/net-common.c new file +13 -0
@@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 + +void copy_filename (char *dst,const char *src,int size) +{ +if (src && *src && (*src =='"' )) { + ++src; + --size; + } + +while ((--size >0 ) && src && *src && (*src !='"' )) + *dst++ = *src++; + *dst ='\0' ; +}
net/net.c +0 -12
@@ -1689,18 +1689,6 @@ void net_set_udp_header(uchar *pkt, struct in_addr dest, int dport, int sport, ip->udp_xsum =0 ; } -void copy_filename (char *dst,const char *src,int size) -{ -if (src && *src && (*src =='"' )) { - ++src; - --size; - } - -while ((--size >0 ) && src && *src && (*src !='"' )) - *dst++ = *src++; - *dst ='\0' ; -} -int is_serverip_in_cmd (void ) {return !!strchr (net_boot_file_name,':' );
Signature · 1 line
2.40.1
PATCH v10 6/25 net: eth-uclass: add function eth_start_udev()
In reply to Jerome ForissierAdd a function to start a given network device, and update eth_init() to use it.
--- include/net-common.h | 1 + net/eth-uclass.c | 38 +++++++++++++++++++++++++------------- 2 files changed, 26 insertions(+), 13 deletions(-)
include/net-common.h +1 -0
@@ -192,6 +192,7 @@ int eth_env_set_enetaddr_by_index(const char *base_name, int index,int usb_ether_init (void );int eth_init (void );/* Initialize the device */ +int eth_start_udev (struct udevice *dev);/* ->start() if not already running */ int eth_send (void *packet,int length);/* Send a packet */ #if defined(CONFIG_API ) || defined(CONFIG_EFI_LOADER )int eth_receive (void *packet,int length);/* Receive a packet*/
net/eth-uclass.c +25 -13
@@ -284,6 +284,27 @@ static int on_ethaddr(const char *name, const char *value, enum env_op op, }U_BOOT_ENV_CALLBACK (ethaddr, on_ethaddr); +int eth_start_udev (struct udevice *dev) +{ +struct eth_device_priv *priv =dev_get_uclass_priv (dev); +int ret; + +if (priv->running) +return 0 ; + +if (!device_active (dev)) +return -EINVAL ; + + ret =eth_get_ops (dev)->start (dev); +if (ret <0 ) +return ret; + + priv->state =ETH_STATE_ACTIVE ; + priv->running = true; + +return 0 ; +} +int eth_init (void ) {struct udevice *current =NULL ;
@@ -328,20 +349,11 @@ int eth_init(void)if (current) {debug ("Trying %s\n" , current->name); -if (device_active (current)) { - ret =eth_get_ops (current)->start (current); -if (ret >=0 ) { -struct eth_device_priv *priv = -dev_get_uclass_priv (current); - - priv->state =ETH_STATE_ACTIVE ; - priv->running = true; - ret =0 ; - goto end; - } - }else { + ret =eth_start_udev (current); +if (ret <0 ) ret = eth_errno; - } +else +break ;debug ("FAIL\n" ); }else {
Signature · 1 line
2.40.1
PATCH v10 7/25 net-lwip: build lwIP
In reply to Jerome ForissierBuild the lwIP library when NET_LWIP is enabled. The following files are adaptation layers written specially for U-Boot:
lib/lwip/u-boot/arch/cc.h
lib/lwip/u-boot/arch/sys_arch.h (empty)
lib/lwip/u-boot/limits.h (empty)
lib/lwip/u-boot/lwipopts.h
They were initially contributed by Maxim in a previous RFC patch series.
--- lib/Makefile | 2 + lib/lwip/Makefile | 55 +++++++++++ lib/lwip/u-boot/arch/cc.h | 45 +++++++++ lib/lwip/u-boot/arch/sys_arch.h | 0 lib/lwip/u-boot/limits.h | 0 lib/lwip/u-boot/lwipopts.h | 157 ++++++++++++++++++++++++++++++++ net/lwip/Kconfig | 10 ++ 7 files changed, 269 insertions(+) create mode 100644 lib/lwip/Makefile create mode 100644 lib/lwip/u-boot/arch/cc.h create mode 100644 lib/lwip/u-boot/arch/sys_arch.h create mode 100644 lib/lwip/u-boot/limits.h create mode 100644 lib/lwip/u-boot/lwipopts.h
lib/Makefile +2 -0
@@ -96,6 +96,8 @@ obj-$(CONFIG_LIBAVB) += libavb/ obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/ obj-$(CONFIG_$(SPL_TPL_)OF_REAL) += fdtdec_common.o fdtdec.o +obj-$(CONFIG_NET_LWIP) += lwip/ + ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16-ccitt.o obj-$(CONFIG_$(SPL_TPL_)HASH) += crc16-ccitt.o
lib/lwip/Makefile new file +55 -0
55 lines not on this page · raw message
lib/lwip/u-boot/arch/cc.h new file +45 -0
45 lines not on this page · raw message
lib/lwip/u-boot/arch/sys_arch.h new file +0 -0
lib/lwip/u-boot/limits.h new file +0 -0
lib/lwip/u-boot/lwipopts.h new file +157 -0
157 lines not on this page · raw message
net/lwip/Kconfig +10 -0
@@ -35,4 +35,14 @@ config PROT_TCP_SACK_LWIP config PROT_UDP_LWIP bool +config LWIP_TCP_WND + int "Value of TCP_WND" + default 3000000 + help + Default value for TCP_WND in the lwIP configuration + Lower values result in slower wget transfer speeds in + general, especially when the latency on the network is high, + but QEMU with "-net user" needs no more than a few KB or the + transfer will stall and eventually time out. + endif # NET_LWIP
Signature · 1 line
2.40.1
PATCH v10 8/25 net-lwip: add DHCP support and dhcp commmand
In reply to Jerome ForissierAdd what it takes to enable NETDEVICES with NET_LWIP and enable DHCP as well as the dhcp command. CMD_TFTPBOOT is selected by BOOTMETH_EFI due to this code having an implicit dependency on do_tftpb().
--- board/engicam/imx8mp/icore_mx8mp.c | 2 +- .../imx8mp_debix_model_a.c | 2 +- board/ti/am335x/board.c | 3 +- board/xilinx/common/board.c | 3 +- boot/Kconfig | 3 +- cmd/Kconfig | 90 +++--- cmd/Makefile | 6 +- cmd/elf.c | 2 +- cmd/net-lwip.c | 13 + common/board_r.c | 4 +- common/usb_kbd.c | 2 +- drivers/net/Kconfig | 2 +- include/net-lwip.h | 3 + lib/tiny-printf.c | 3 +- net/Makefile | 14 +- net/lwip/Makefile | 5 + net/lwip/dhcp.c | 125 ++++++++ net/lwip/eth_internal.h | 35 +++ net/lwip/net-lwip.c | 286 ++++++++++++++++++ net/lwip/tftp.c | 11 + 20 files changed, 559 insertions(+), 55 deletions(-) create mode 100644 cmd/net-lwip.c create mode 100644 net/lwip/Makefile create mode 100644 net/lwip/dhcp.c create mode 100644 net/lwip/eth_internal.h create mode 100644 net/lwip/net-lwip.c create mode 100644 net/lwip/tftp.c
board/engicam/imx8mp/icore_mx8mp.c +1 -1
@@ -33,7 +33,7 @@ static void setup_fec(void)setbits_le32 (&gpr->gpr[1 ],BIT (22 )); } -#if CONFIG_IS_ENABLED (NET ) +#if CONFIG_IS_ENABLED (NET ) ||CONFIG_IS_ENABLED (NET_LWIP )int board_phy_config (struct phy_device *phydev) {if (phydev->drv->config)
board/polyhex/imx8mp_debix_model_a/imx8mp_debix_model_a.c +1 -1
@@ -29,7 +29,7 @@ static void setup_fec(void)setbits_le32 (&gpr->gpr[1 ],BIT (22 )); } -#if CONFIG_IS_ENABLED (NET ) +#if CONFIG_IS_ENABLED (NET ) ||CONFIG_IS_ENABLED (NET_LWIP )int board_phy_config (struct phy_device *phydev) {if (phydev->drv->config)
board/ti/am335x/board.c +2 -1
@@ -900,7 +900,8 @@ int board_late_init(void)#endif /* CPSW plat */ -#if CONFIG_IS_ENABLED(NET) && !CONFIG_IS_ENABLED(OF_CONTROL) +#if (CONFIG_IS_ENABLED(NET) || CONFIG_IS_ENABLED(NET_LWIP)) && \ + !CONFIG_IS_ENABLED(OF_CONTROL) struct cpsw_slave_data slave_data[] = { { .slave_reg_ofs = CPSW_SLAVE0_OFFSET,
board/xilinx/common/board.c +2 -1
@@ -494,7 +494,8 @@ int board_late_init_xilinx(void) ret |=env_set_by_index ("uuid" , id, uuid); } -if (!CONFIG_IS_ENABLED (NET )) +if (!(CONFIG_IS_ENABLED (NET ) || +CONFIG_IS_ENABLED (NET_LWIP )))continue ;for (i =0 ; i <EEPROM_HDR_NO_OF_MAC_ADDR ; i++) {
boot/Kconfig +2 -1
@@ -380,7 +380,7 @@ config BOOT_DEFAULTS_CMDS select CMD_PART if PARTITIONS select CMD_DHCP if CMD_NET select CMD_PING if CMD_NET - select CMD_PXE if CMD_NET + select CMD_PXE if (CMD_NET && !NET_LWIP) select CMD_BOOTI if ARM64 select CMD_BOOTZ if ARM && !ARM64 imply CMD_MII if NET
@@ -558,6 +558,7 @@ config BOOTMETH_EXTLINUX_PXE config BOOTMETH_EFILOADER bool "Bootdev support for EFI boot" depends on EFI_BINARY_EXEC + select CMD_TFTPBOOT if CMD_NET default y help Enables support for EFI boot using bootdevs. This makes the
cmd/Kconfig +52 -38
131 lines not on this page · raw message
cmd/Makefile +5 -1
@@ -127,7 +127,11 @@ obj-y += legacy-mtd-utils.o endif obj-$(CONFIG_CMD_MUX) += mux.o obj-$(CONFIG_CMD_NAND) += nand.o -obj-$(CONFIG_CMD_NET) += net.o +ifdef CONFIG_CMD_NET +obj-$(CONFIG_NET) += net.o +obj-$(CONFIG_NET_LWIP) += net-lwip.o +CFLAGS_net-lwip.o := -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot +endif obj-$(CONFIG_ENV_SUPPORT) += nvedit.o obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o obj-$(CONFIG_CMD_ONENAND) += onenand.o
cmd/elf.c +1 -1
@@ -130,7 +130,7 @@ int do_bootvx(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])else addr =hextoul (argv[1 ],NULL ); -#if defined(CONFIG_CMD_NET ) +#if defined(CONFIG_CMD_NET ) && !defined(CONFIG_NET_LWIP )/* * Check to see if we need to tftp the image ourselves * before starting
cmd/net-lwip.c new file +13 -0
@@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2024 Linaro Ltd. */ + +#include <command.h> +#include <net.h> + +#if defined(CONFIG_CMD_DHCP ) +U_BOOT_CMD ( + dhcp,3 ,1 , do_dhcp, +"boot image via network using DHCP/TFTP protocol" , +"[loadAddress] [[hostIPaddr:]bootfilename]" +); +#endif
common/board_r.c +2 -2
@@ -472,7 +472,7 @@ static int initr_status_led(void) }#endif -#ifdef CONFIG_CMD_NET +#if defined(CONFIG_CMD_NET )static int initr_net (void ) {puts ("Net: " );
@@ -738,7 +738,7 @@ static init_fnc_t init_sequence_r[] = {#ifdef CONFIG_PCI_ENDPOINT pci_ep_init,#endif -#ifdef CONFIG_CMD_NET +#if defined(CONFIG_CMD_NET ) INIT_FUNC_WATCHDOG_RESET initr_net,#endif
common/usb_kbd.c +1 -1
@@ -418,7 +418,7 @@ static int usb_kbd_testc(struct stdio_dev *sdev)*/ unsigned long poll_delay =CONFIG_SYS_HZ /50 ; -#ifdef CONFIG_CMD_NET +#if defined(CONFIG_CMD_NET ) && !defined(CONFIG_NET_LWIP )/* * If net_busy_flag is 1, NET transfer is running, * then we check key-pressed every second (first check may be
drivers/net/Kconfig +1 -1
@@ -97,7 +97,7 @@ config DSA_SANDBOX menuconfig NETDEVICES bool "Network device support" - depends on NET + depends on NET || NET_LWIP select DM_ETH help You must select Y to enable any network device support
include/net-lwip.h +3 -0
@@ -10,5 +10,8 @@ struct netif *net_lwip_new_netif(struct udevice *udev);struct netif *net_lwip_new_netif_noip (struct udevice *udev);void net_lwip_remove_netif (struct netif *netif);struct netif *net_lwip_get_netif (void ); +int net_lwip_rx (struct udevice *udev,struct netif *netif); + +int do_dhcp (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]);#endif /* __NET_LWIP_H__ */
lib/tiny-printf.c +2 -1
@@ -269,7 +269,8 @@ static int _vprintf(struct printf_info *info, const char *fmt, va_list va) }break ;case 'p' : -if (CONFIG_IS_ENABLED (NET ) || _DEBUG) { +if (CONFIG_IS_ENABLED (NET ) || +CONFIG_IS_ENABLED (NET_LWIP ) || _DEBUG) { pointer(info, fmt, va_arg(va, void *));/* * Skip this because it pulls in _ctype which is
net/Makefile +9 -5
@@ -12,11 +12,6 @@ obj-$(CONFIG_CMD_BOOTP) += bootp.o obj-$(CONFIG_CMD_CDP) += cdp.o obj-$(CONFIG_CMD_DNS) += dns.o obj-$(CONFIG_DM_DSA) += dsa-uclass.o -obj-$(CONFIG_$(SPL_)DM_ETH) += eth-uclass.o -obj-$(CONFIG_$(SPL_TPL_)BOOTDEV_ETH) += eth_bootdev.o -obj-$(CONFIG_DM_MDIO) += mdio-uclass.o -obj-$(CONFIG_DM_MDIO_MUX) += mdio-mux-uclass.o -obj-$(CONFIG_$(SPL_)DM_ETH) += eth_common.o obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o obj-$(CONFIG_IPV6) += ndisc.o obj-$(CONFIG_$(SPL_)DM_ETH) += net.o
@@ -43,4 +38,13 @@ CFLAGS_eth_common.o += -Wno-format-extra-args endif +ifeq ($(filter y,$(CONFIG_NET) $(CONFIG_NET_LWIP)),y) +obj-$(CONFIG_$(SPL_TPL_)BOOTDEV_ETH) += eth_bootdev.o +obj-$(CONFIG_DM_MDIO) += mdio-uclass.o +obj-$(CONFIG_DM_MDIO_MUX) += mdio-mux-uclass.o +obj-$(CONFIG_$(SPL_)DM_ETH) += eth-uclass.o +obj-$(CONFIG_$(SPL_)DM_ETH) += eth_common.o obj-y += net-common.o +endif + +obj-$(CONFIG_NET_LWIP) += lwip/
net/lwip/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +ccflags-y += -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot + +obj-$(CONFIG_$(SPL_)DM_ETH) += net-lwip.o +obj-$(CONFIG_CMD_DHCP) += dhcp.o +obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o
net/lwip/dhcp.c new file +125 -0
125 lines not on this page · raw message
net/lwip/eth_internal.h new file +35 -0
@@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2001-2015 +* Wolfgang Denk, DENX Software Engineering, [email protected]. +* Joe Hershberger, National Instruments +*/ + +#ifndef __ETH_INTERNAL_H +#define __ETH_INTERNAL_H + +/* Do init that is common to driver model and legacy networking */ +void eth_common_init (void ); + +/** +* eth_env_set_enetaddr_by_index() - set the MAC address environment variable +* +* This sets up an environment variable with the given MAC address (@enetaddr). +* The environment variable to be set is defined by <@base_name><@index>addr. +* If @index is 0 it is omitted. For common Ethernet this means ethaddr, +* eth1addr, etc. +* +* @base_name: Base name for variable, typically "eth" +* @index: Index of interface being updated (>=0) +* @enetaddr: Pointer to MAC address to put into the variable +* Return: 0 if OK, other value on error +*/ +int eth_env_set_enetaddr_by_index (const char *base_name,int index, +uchar *enetaddr); + +int eth_mac_skip (int index); +void eth_current_changed (void ); +void eth_set_dev (struct udevice *dev); +void eth_set_current_to_next (void ); + +#endif
net/lwip/net-lwip.c new file +286 -0
286 lines not on this page · raw message
net/lwip/tftp.c new file +11 -0
@@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2024 Linaro Ltd. */ + +#include <command.h> +#include <net-lwip.h> + +int do_tftpb (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]) +{ +/* Not implemented */ +return CMD_RET_FAILURE ; +}
Signature · 1 line
2.40.1
PATCH v10 9/25 net-lwip: add TFTP support and tftpboot command
In reply to Jerome ForissierImplement do_tftpb(). This implementation of the tftp command supports an optional port number. For example:
tftp 192.168.0.30:9069:file.bin
It also supports taking the server IP from ${tftpserverip} if defined, before falling back to ${serverip}.
--- cmd/Kconfig | 3 +- cmd/net-lwip.c | 8 ++ include/net-common.h | 4 + include/net-lwip.h | 4 + net/lwip/dhcp.c | 11 +- net/lwip/net-lwip.c | 16 +++ net/lwip/tftp.c | 279 ++++++++++++++++++++++++++++++++++++++++++- 7 files changed, 319 insertions(+), 6 deletions(-)
cmd/Kconfig +1 -2
@@ -2116,10 +2116,9 @@ config CMD_MDIO config CMD_TFTPBOOT bool "tftp" select PROT_UDP_LWIP if NET_LWIP - default n + default y help tftpboot - load file via network using TFTP protocol - Currently a placeholder (not implemented) when NET_LWIP=y. endif # if CMD_NET
cmd/net-lwip.c +8 -0
@@ -11,3 +11,11 @@ U_BOOT_CMD("[loadAddress] [[hostIPaddr:]bootfilename]" );#endif + +#if defined(CONFIG_CMD_TFTPBOOT ) +U_BOOT_CMD ( + tftpboot,3 ,0 , do_tftpb, +"boot image via network using TFTP protocol\n" , +"[loadAddress] [[hostIPaddr:]bootfilename]" +); +#endif
include/net-common.h +4 -0
@@ -440,6 +440,10 @@ static inline struct in_addr env_get_ip(char *var)int net_init (void ); +/* NET compatibility */ +enum proto_t ; +int net_loop (enum proto_t protocol); +/** * dhcp_run() - Run DHCP on the current ethernet device *
include/net-lwip.h +4 -0
@@ -6,6 +6,10 @@#include <lwip/ip4.h> #include <lwip/netif.h> +enum proto_t { +TFTPGET +}; +struct netif *net_lwip_new_netif (struct udevice *udev);struct netif *net_lwip_new_netif_noip (struct udevice *udev);void net_lwip_remove_netif (struct netif *netif);
net/lwip/dhcp.c +10 -1
@@ -114,11 +114,20 @@ int do_dhcp(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])int dhcp_run (ulong addr,const char *fname,bool autoload) {char *dhcp_argv[] = {"dhcp" ,NULL , }; +#ifdef CONFIG_CMD_TFTPBOOT +char *tftp_argv[] = {"tftpboot" , boot_file_name,NULL , }; +#endif struct cmd_tbl cmdtp = {};/* dummy */ if (autoload) { -/* Will be supported when TFTP is added */ +#ifdef CONFIG_CMD_TFTPBOOT +/* Assume DHCP was already performed */ +if (boot_file_name[0 ]) +return do_tftpb (&cmdtp,0 ,2 , tftp_argv); +return 0 ; +#else return -EOPNOTSUPP ; +#endif }return do_dhcp (&cmdtp,0 ,1 , dhcp_argv);
net/lwip/net-lwip.c +16 -0
@@ -24,6 +24,7 @@ static uchar net_pkt_buf[(PKTBUFSRX) * PKTSIZE_ALIGN + PKTALIGN];uchar *net_rx_packets[PKTBUFSRX ];uchar *net_rx_packet;const u8 net_bcast_ethaddr[6 ] = {0xff ,0xff ,0xff ,0xff ,0xff ,0xff }; +char net_boot_file_name[1024 ];static err_t linkoutput (struct netif *netif,struct pbuf *p) {
@@ -280,6 +281,21 @@ void net_process_received_packet(uchar *in_packet, int len)#endif } +int net_loop (enum proto_t protocol) +{ +char *argv[1 ]; + +switch (protocol) { +case TFTPGET : + argv[0 ] ="tftpboot" ; +return do_tftpb (NULL ,0 ,1 , argv); +default : +return -EINVAL ; + } + +return -EINVAL ; +} +u32_t sys_now (void ) {return get_timer (0 );
net/lwip/tftp.c +276 -3
286 lines not on this page · raw message
Signature · 1 line
2.40.1
PATCH v10 10/25 net-lwip: add ping command
In reply to Jerome ForissierAdd support for the the ping command with NET_LWIP. The implementation is derived from lwIP's contrib/apps/ping/ping.c.
--- cmd/Kconfig | 11 +-- cmd/net-lwip.c | 8 ++ include/net-lwip.h | 1 + net/lwip/Makefile | 1 + net/lwip/ping.c | 177 +++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 193 insertions(+), 5 deletions(-) create mode 100644 net/lwip/ping.c
cmd/Kconfig +6 -5
@@ -2008,11 +2008,6 @@ config CMD_WGET wget is a simple command to download kernel, or other files, from a http server over TCP. -config CMD_PING - bool "ping" - help - Send ICMP ECHO_REQUEST to network host - config CMD_PING6 bool "ping6" depends on IPV6
@@ -2113,6 +2108,12 @@ config CMD_MDIO The MDIO interface is orthogonal to the MII interface and extends it by adding access to more registers through indirect addressing. +config CMD_PING + bool "ping" + select PROT_RAW_LWIP if NET_LWIP + help + Send ICMP ECHO_REQUEST to network host + config CMD_TFTPBOOT bool "tftp" select PROT_UDP_LWIP if NET_LWIP
cmd/net-lwip.c +8 -0
@@ -12,6 +12,14 @@ U_BOOT_CMD( );#endif +#if defined(CONFIG_CMD_PING ) +U_BOOT_CMD ( + ping,2 ,1 , do_ping, +"send ICMP ECHO_REQUEST to network host" , +"pingAddress" +); +#endif +#if defined(CONFIG_CMD_TFTPBOOT ) U_BOOT_CMD( tftpboot, 3, 0, do_tftpb,
include/net-lwip.h +1 -0
@@ -17,5 +17,6 @@ struct netif *net_lwip_get_netif(void);int net_lwip_rx (struct udevice *udev,struct netif *netif);int do_dhcp (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]); +int do_ping (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]);#endif /* __NET_LWIP_H__ */
net/lwip/Makefile +1 -0
@@ -2,4 +2,5 @@ ccflags-y += -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot obj-$(CONFIG_$(SPL_)DM_ETH) += net-lwip.o obj-$(CONFIG_CMD_DHCP) += dhcp.o +obj-$(CONFIG_CMD_PING) += ping.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o
net/lwip/ping.c new file +177 -0
177 lines not on this page · raw message
Signature · 1 line
2.40.1
PATCH v10 11/25 net-lwip: add dns command
In reply to Jerome ForissierAdd CMD_DNS when NET_LWIP is enabled to provide the dns command using lwIP.
--- cmd/Kconfig | 11 ++-- cmd/net-lwip.c | 8 +++ include/net-lwip.h | 1 + net/lwip/Makefile | 1 + net/lwip/dns.c | 127 +++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 143 insertions(+), 5 deletions(-) create mode 100644 net/lwip/dns.c
cmd/Kconfig +6 -5
@@ -2026,11 +2026,6 @@ config CMD_SNTP help Synchronize RTC via network -config CMD_DNS - bool "dns" - help - Lookup the IP of a hostname - config CMD_LINK_LOCAL bool "linklocal" select LIB_RAND
@@ -2085,6 +2080,12 @@ config CMD_DHCP help Boot image via network using DHCP/TFTP protocol +config CMD_DNS + bool "dns" + select PROT_DNS_LWIP if NET_LWIP + help + Lookup the IP of a hostname + config CMD_MII bool "mii" imply CMD_MDIO
cmd/net-lwip.c +8 -0
@@ -27,3 +27,11 @@ U_BOOT_CMD("[loadAddress] [[hostIPaddr:]bootfilename]" );#endif + +#if defined(CONFIG_CMD_DNS ) +U_BOOT_CMD ( + dns,3 ,1 , do_dns, +"lookup the IP of a hostname" , +"hostname [envvar]" +); +#endif
include/net-lwip.h +1 -0
@@ -17,6 +17,7 @@ struct netif *net_lwip_get_netif(void);int net_lwip_rx (struct udevice *udev,struct netif *netif);int do_dhcp (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]); +int do_dns (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]);int do_ping (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]);#endif /* __NET_LWIP_H__ */
net/lwip/Makefile +1 -0
@@ -2,5 +2,6 @@ ccflags-y += -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot obj-$(CONFIG_$(SPL_)DM_ETH) += net-lwip.o obj-$(CONFIG_CMD_DHCP) += dhcp.o +obj-$(CONFIG_CMD_DNS) += dns.o obj-$(CONFIG_CMD_PING) += ping.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o
net/lwip/dns.c new file +127 -0
127 lines not on this page · raw message
Signature · 1 line
2.40.1
PATCH v10 12/25 net: split cmd/net.c into cmd/net.c and cmd/net-common.c
In reply to Jerome ForissierExtract some code from cmd/net.c that will be useful in a subsequent commit to implement wget with NET_LWIP.
--- cmd/Makefile | 5 ++- cmd/net-common.c | 109 ++++++++++++++++++++++++++++++++++++++++++++ cmd/net.c | 115 ----------------------------------------------- 3 files changed, 113 insertions(+), 116 deletions(-) create mode 100644 cmd/net-common.c
cmd/Makefile +4 -1
@@ -130,7 +130,10 @@ obj-$(CONFIG_CMD_NAND) += nand.o ifdef CONFIG_CMD_NET obj-$(CONFIG_NET) += net.o obj-$(CONFIG_NET_LWIP) += net-lwip.o -CFLAGS_net-lwip.o := -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot +obj-$(filter y,$(CONFIG_CMD_NET) $(CONFIG_CMD_NET_LWIP)) += net-common.o +lwip-includes := -I$(srctree)/lib/lwip/lwip/src/include -I$(srctree)/lib/lwip/u-boot +CFLAGS_net-lwip.o := $(lwip-includes) +CFLAGS_net-common.o := $(lwip-includes) endif obj-$(CONFIG_ENV_SUPPORT) += nvedit.o obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o
cmd/net-common.c new file +109 -0
109 lines not on this page · raw message
cmd/net.c +0 -115
118 lines not on this page · raw message
Signature · 1 line
2.40.1
PATCH v10 13/25 net-lwip: add wget command
In reply to Jerome ForissierAdd support for the wget command with NET_LWIP. The command normally expects a URL: wget [loadaddr] url, but it also accepts the legacy
syntax: wget [loadaddr] [server:]file.
The server IP may alternatively be supplied via ${httpserverip} which has higher priority than ${serverip}.
Based on code initially developed by Maxim U.
--- cmd/Kconfig | 18 ++- cmd/net-lwip.c | 8 + include/net-lwip.h | 18 +++ net/lwip/Makefile | 1 + net/lwip/wget.c | 363 +++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 400 insertions(+), 8 deletions(-) create mode 100644 net/lwip/wget.c
cmd/Kconfig +10 -8
@@ -2000,14 +2000,6 @@ config SYS_DISABLE_AUTOLOAD is complete. Enable this option to disable this behavior and instead require files to be loaded over the network by subsequent commands. -config CMD_WGET - bool "wget" - select PROT_TCP - default y if SANDBOX - help - wget is a simple command to download kernel, or other files, - from a http server over TCP. - config CMD_PING6 bool "ping6" depends on IPV6
@@ -2122,6 +2114,16 @@ config CMD_TFTPBOOT help tftpboot - load file via network using TFTP protocol +config CMD_WGET + bool "wget" + default y if SANDBOX + select PROT_TCP if NET + select PROT_TCP_LWIP if NET_LWIP + select PROT_DNS_LWIP if NET_LWIP + help + wget is a simple command to download kernel, or other files, + from a http server over TCP. + endif # if CMD_NET endif # if NET || NET_LWIP
cmd/net-lwip.c +8 -0
@@ -35,3 +35,11 @@ U_BOOT_CMD("hostname [envvar]" );#endif + +#if defined(CONFIG_CMD_WGET ) +U_BOOT_CMD ( + wget,3 ,1 , do_wget, +"boot image via network using HTTP protocol" , +"[loadAddress] URL" +); +#endif
include/net-lwip.h +18 -0
@@ -16,8 +16,26 @@ void net_lwip_remove_netif(struct netif *netif);struct netif *net_lwip_get_netif (void );int net_lwip_rx (struct udevice *udev,struct netif *netif); +/** +* wget_with_dns() - runs dns host IP address resulution before wget +* +* @dst_addr: destination address to download the file +* @uri: uri string of target file of wget +* Return: downloaded file size, negative if failed +*/ + +int wget_with_dns (ulong dst_addr,char *uri); +/** +* wget_validate_uri() - varidate the uri +* +* @uri: uri string of target file of wget +* Return: true if uri is valid, false if uri is invalid +*/ +bool wget_validate_uri (char *uri); +int do_dhcp (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]);int do_dns (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]);int do_ping (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]); +int do_wget (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]);#endif /* __NET_LWIP_H__ */
net/lwip/Makefile +1 -0
@@ -5,3 +5,4 @@ obj-$(CONFIG_CMD_DHCP) += dhcp.o obj-$(CONFIG_CMD_DNS) += dns.o obj-$(CONFIG_CMD_PING) += ping.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o +obj-$(CONFIG_CMD_WGET) += wget.o
net/lwip/wget.c new file +363 -0
363 lines not on this page · raw message
Signature · 1 line
2.40.1
PATCH v10 14/25 net-lwip: lwIP wget supports user defined port in the uri, so allow it.
In reply to Jerome ForissierFrom: Jonathan Humphreys <[email protected]>
--- net/lwip/wget.c | 6 ------ 1 file changed, 6 deletions(-)
net/lwip/wget.c +0 -6
@@ -349,12 +349,6 @@ bool wget_validate_uri(char *uri) ret = false; goto out; } - s =strchr (authority,':' ); -if (s) { -log_err ("user defined port is not supported\n" ); - ret = false; - goto out; - } out:free (str_copy);
Signature · 1 line
2.40.1
PATCH v10 15/25 cmd: bdinfo: enable -e when CONFIG_CMD_NET_LWIP=y
In reply to Jerome ForissierSupport "bdinfo -e" when lwIP is selected.
--- cmd/bdinfo.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
cmd/bdinfo.c +3 -2
@@ -151,7 +151,7 @@ static int bdinfo_print_all(struct bd_info *bd)bdinfo_print_num_l ("relocaddr" , gd->relocaddr);bdinfo_print_num_l ("reloc off" , gd->reloc_off);printf ("%-12s= %u-bit\n" ,"Build" , (uint )sizeof (void *) *8 ); -if (IS_ENABLED (CONFIG_CMD_NET )) +if (IS_ENABLED (CONFIG_CMD_NET ) ||IS_ENABLED (CONFIG_CMD_NET_LWIP ))print_eth ();bdinfo_print_num_l ("fdt_blob" , (ulong )map_to_sysmem (gd->fdt_blob));if (IS_ENABLED (CONFIG_VIDEO ))
@@ -192,7 +192,8 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])case 'a' :return bdinfo_print_all (bd);case 'e' : -if (!IS_ENABLED (CONFIG_CMD_NET )) +if (!IS_ENABLED (CONFIG_CMD_NET ) && + !IS_ENABLED (CONFIG_CMD_NET_LWIP ))return CMD_RET_USAGE ;print_eth ();return CMD_RET_SUCCESS ;
Signature · 1 line
2.40.1
PATCH v10 16/25 configs: add qemu_arm64_lwip_defconfig
In reply to Jerome ForissierAdd qemu_arm64_lwip_defconfig which #include's qemu_arm64_defconfig and selects NET_LWIP instead of NET. This config has all the supported net commands enabled.
--- configs/qemu_arm64_lwip_defconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 configs/qemu_arm64_lwip_defconfig
configs/qemu_arm64_lwip_defconfig new file +10 -0
@@ -0,0 +1,10 @@ +#include <configs/qemu_arm64_defconfig> + +CONFIG_ARM=y +CONFIG_ARCH_QEMU=y + +CONFIG_NET_LWIP=y +CONFIG_CMD_DNS=y +CONFIG_CMD_WGET=y +CONFIG_EFI_HTTP_BOOT=y +CONFIG_LWIP_TCP_WND=8000
Signature · 1 line
2.40.1
PATCH v10 17/25 lwip: tftp: add support of blksize option to client
In reply to Jerome ForissierThe TFTP protocol uses a default block size of 512 bytes. This value is sub-optimal for ethernet devices, which have a MTU (Maximum Transmission Unit) of 1500 bytes. When taking into acount the overhead of the IP and UDP layers, this leaves 1468 bytes for the TFTP payload.
This patch introduces a new function: tftp_client_set_blksize() which may be used to change the block size from the default. It has to be called after tftp_client_init() and before tftp_get(). If the server does not support the option, the client will still accept to receive 512-byte blocks.
--- lib/lwip/lwip/src/apps/tftp/tftp.c | 94 +++++++++++++++++-- .../lwip/src/include/lwip/apps/tftp_client.h | 1 + 2 files changed, 89 insertions(+), 6 deletions(-)
lib/lwip/lwip/src/apps/tftp/tftp.c +88 -6
@@ -57,7 +57,7 @@#include "lwip/timeouts.h" #include "lwip/debug.h" -#define TFTP_MAX_PAYLOAD_SIZE 512 +#define TFTP_DEFAULT_BLOCK_SIZE 512#define TFTP_HEADER_LENGTH 4#define TFTP_RRQ 1
@@ -65,6 +65,7 @@#define TFTP_DATA 3#define TFTP_ACK 4#define TFTP_ERROR 5 +#define TFTP_OACK 6enum tftp_error {TFTP_ERROR_FILE_NOT_FOUND =1 ,
@@ -88,9 +89,11 @@ struct tftp_state {int timer;int last_pkt;u16_t blknum; +u16_t blksize;u8_t retries;u8_t mode_write;u8_t tftp_mode; +bool wait_oack; };static struct tftp_state tftp_state;
@@ -137,10 +140,24 @@ send_request(const ip_addr_t *addr, u16_t port, u16_t opcode, const char* fname, {size_t fname_length =strlen (fname)+1 ;size_t mode_length =strlen (mode)+1 ; -struct pbuf * p =init_packet (opcode,0 , fname_length + mode_length -2 ); +size_t blksize_length =0 ; +struct pbuf * p;char * payload;err_t ret; +if (tftp_state.blksize) { + blksize_length =14 ;/* maximum (blksize is a u16_t): 'blksize\0XXXXX\0' */ +if (tftp_state.blksize <10000 ) + blksize_length--; +if (tftp_state.blksize <1000 ) + blksize_length--; +if (tftp_state.blksize <100 ) + blksize_length--; +if (tftp_state.blksize <10 ) + blksize_length--; + } + + p =init_packet (opcode,0 , fname_length + mode_length + blksize_length -2 );if (p ==NULL ) {return ERR_MEM ; }
@@ -148,7 +165,10 @@ send_request(const ip_addr_t *addr, u16_t port, u16_t opcode, const char* fname, payload = (char *) p->payload;MEMCPY (payload+2 , fname, fname_length);MEMCPY (payload+2 +fname_length, mode, mode_length); +if (tftp_state.blksize) +sprintf (payload+2 +fname_length+mode_length,"blksize%c%d%c" ,0 , tftp_state.blksize,0 ); + tftp_state.wait_oack = true; ret =udp_sendto (tftp_state.upcb, p, addr, port);pbuf_free (p);return ret;
@@ -221,14 +241,14 @@ send_data(const ip_addr_t *addr, u16_t port)pbuf_free (tftp_state.last_data); } - tftp_state.last_data =init_packet (TFTP_DATA , tftp_state.blknum,TFTP_MAX_PAYLOAD_SIZE ); + tftp_state.last_data =init_packet (TFTP_DATA , tftp_state.blknum,TFTP_DEFAULT_BLOCK_SIZE );if (tftp_state.last_data ==NULL ) {return ; } payload = (u16_t *) tftp_state.last_data->payload; - ret = tftp_state.ctx->read (tftp_state.handle, &payload[2 ],TFTP_MAX_PAYLOAD_SIZE ); + ret = tftp_state.ctx->read (tftp_state.handle, &payload[2 ],TFTP_DEFAULT_BLOCK_SIZE );if (ret <0 ) {send_error (addr, port,TFTP_ERROR_ACCESS_VIOLATION ,"Error occurred while reading the file." );close_handle ();
@@ -239,6 +259,28 @@ send_data(const ip_addr_t *addr, u16_t port)resend_data (addr, port); } +static u16_t payload_size (void ) +{ +if (tftp_state.blksize) +return tftp_state.blksize; +return TFTP_DEFAULT_BLOCK_SIZE ; +} + +static const char * +find_option (struct pbuf *p,const char *option) +{ +int i; +u16_t optlen =strlen (option); +const char *b = p->payload; + +for (i =0 ; i + optlen +1 < p->len; i++) { +if (lwip_strnstr (b + i, option, optlen)) +return b + i + optlen +2 ; + } + +return NULL ; +} +static void tftp_recv (void *arg,struct udp_pcb *upcb,struct pbuf *p,const ip_addr_t *addr,u16_t port) {
@@ -338,6 +380,15 @@ tftp_recv(void *arg, struct udp_pcb *upcb, struct pbuf *p, const ip_addr_t *addr } blknum =lwip_ntohs (sbuf[1 ]); +if (tftp_state.blksize && tftp_state.wait_oack) { +/* +* Data received while we are expecting an OACK for our blksize option. +* This means the server doesn't support it, let's switch back to the +* default block size. +*/ + tftp_state.blksize =0 ; + tftp_state.wait_oack = false; + }if (blknum == tftp_state.blknum) {pbuf_remove_header (p,TFTP_HEADER_LENGTH );
@@ -349,7 +400,7 @@ tftp_recv(void *arg, struct udp_pcb *upcb, struct pbuf *p, const ip_addr_t *addrsend_ack (addr, port, blknum); } -if (p->tot_len <TFTP_MAX_PAYLOAD_SIZE ) { +if (p->tot_len <payload_size ()) {close_handle (); }else { tftp_state.blknum++;
@@ -386,7 +437,7 @@ tftp_recv(void *arg, struct udp_pcb *upcb, struct pbuf *p, const ip_addr_t *addr lastpkt =0 ;if (tftp_state.last_data !=NULL ) { - lastpkt = tftp_state.last_data->tot_len != (TFTP_MAX_PAYLOAD_SIZE +TFTP_HEADER_LENGTH ); + lastpkt = tftp_state.last_data->tot_len != (TFTP_DEFAULT_BLOCK_SIZE +TFTP_HEADER_LENGTH ); }if (!lastpkt) {
@@ -405,6 +456,25 @@ tftp_recv(void *arg, struct udp_pcb *upcb, struct pbuf *p, const ip_addr_t *addrclose_handle (); }break ; +case PP_HTONS (TFTP_OACK ): { +const char *optval =find_option (p,"blksize" ); +u16_t srv_blksize =0 ; + tftp_state.wait_oack = false; +if (optval) { +if (!tftp_state.blksize) { +/* We did not request this option */ +send_error (addr, port,TFTP_ERROR_ILLEGAL_OPERATION ,"blksize unexpected" ); + } + srv_blksize =atoi (optval); +if (srv_blksize <=0 || srv_blksize > tftp_state.blksize) { +send_error (addr, port,TFTP_ERROR_ILLEGAL_OPERATION ,"Invalid blksize" ); + } +LWIP_DEBUGF (TFTP_DEBUG |LWIP_DBG_STATE , ("tftp: accepting blksize=%d\n" , srv_blksize)); + tftp_state.blksize = srv_blksize; + } +send_ack (addr, port,0 ); +break ; + }default :send_error (addr, port,TFTP_ERROR_ILLEGAL_OPERATION ,"Unknown operation" );break ;
@@ -493,6 +563,18 @@ tftp_init_client(const struct tftp_context *ctx)return tftp_init_common (LWIP_TFTP_MODE_CLIENT , ctx); } +/** @ingroup tftp +* Set the block size to be used by the TFTP client. The server may choose to +* accept a lower value. +* @param blksize Block size in bytes +*/ +void +tftp_client_set_blksize (u16_t blksize) +{ +if (blksize !=TFTP_DEFAULT_BLOCK_SIZE ) + tftp_state.blksize = blksize; +} +/** @ingroup tftp * Deinitialize ("turn off") TFTP client/server. */
lib/lwip/lwip/src/include/lwip/apps/tftp_client.h +1 -0
@@ -44,6 +44,7 @@ enum tftp_transfer_mode { };err_t tftp_init_client (const struct tftp_context * ctx); +void tftp_client_set_blksize (u16_t blksize);err_t tftp_get (void * handle,const ip_addr_t *addr,u16_t port,const char * fname,enum tftp_transfer_mode mode);err_t tftp_put (void * handle,const ip_addr_t *addr,u16_t port,const char * fname,enum tftp_transfer_mode mode);
Signature · 1 line
2.40.1
PATCH v10 18/25 net-lwip: add TFTP_BLOCKSIZE
In reply to Jerome ForissierAdd support for setting the TFTP block size. The default value (1468) is fine for Ethernet and allows a better throughput than the TFTP default (512), if the server supports the blksize option of course.
I tested this change with qemu_arm64_lwip_defconfig. The throughput is now 875 KiB/s vs. 313 KiB/s before. That is still a low number, but I think we can't expect more without implementing the windowsize option.
--- net/Kconfig | 20 ++++++++++---------- net/lwip/tftp.c | 2 ++ 2 files changed, 12 insertions(+), 10 deletions(-)
net/Kconfig +10 -10
@@ -60,16 +60,6 @@ config SYS_FAULT_ECHO_LINK_DOWN this option is active, then CONFIG_SYS_FAULT_MII_ADDR also needs to be configured. -config TFTP_BLOCKSIZE - int "TFTP block size" - default 1468 - help - Default TFTP block size. - The MTU is typically 1500 for ethernet, so a TFTP block of - 1468 (MTU minus eth.hdrs) provides a good throughput with - almost-MTU block sizes. - You can also activate CONFIG_IP_DEFRAG to set a larger block. - config TFTP_PORT bool "Set TFTP UDP source/destination ports via the environment" help
@@ -254,6 +244,16 @@ config NET_RANDOM_ETHADDR generated. It will be saved to the appropriate environment variable, too. +config TFTP_BLOCKSIZE + int "TFTP block size" + default 1468 + help + Default TFTP block size. + The MTU is typically 1500 for ethernet, so a TFTP block of + 1468 (MTU minus eth.hdrs) provides a good throughput with + almost-MTU block sizes. + You can also activate CONFIG_IP_DEFRAG to set a larger block. + endif # if NET || NET_LWIP config SYS_RX_ETH_BUFFER
net/lwip/tftp.c +2 -0
@@ -138,6 +138,8 @@ static int tftp_loop(struct udevice *udev, ulong addr, char *fname,if (!(err ==ERR_OK || err ==ERR_USE ))log_err ("tftp_init_client err: %d\n" , err); +tftp_client_set_blksize (CONFIG_TFTP_BLOCKSIZE ); + ctx.start_time =get_timer (0 ); err =tftp_get (&ctx, &srvip, srvport, fname,TFTP_MODE_OCTET );/* might return different errors, like routing problems */
Signature · 1 line
2.40.1
PATCH v10 19/25 CI: add qemu_arm64_lwip to the test matrix
In reply to Jerome ForissierBuild and run qemu_arm64_lwip_defconfig in CI. This tests the lightweight IP (lwIP) implementation of the dhcp, tftpboot and ping commands.
--- .azure-pipelines.yml | 7 +++++++ 1 file changed, 7 insertions(+)
.azure-pipelines.yml +7 -0
@@ -238,6 +238,10 @@ stages: cd \${WORK_DIR} git config --global --add safe.directory \${WORK_DIR} git clone --depth=1 https://source.denx.de/u-boot/u-boot-test-hooks /tmp/uboot-test-hooks + # qemu_arm64_lwip_defconfig is the same as qemu_arm64 but with NET_LWIP enabled. + # The test config and the boardenv file from qemu_arm64 can be re-used so create symlinks + ln -s conf.qemu_arm64_na /tmp/uboot-test-hooks/bin/travis-ci/conf.qemu_arm64_lwip_na + ln -s u_boot_boardenv_qemu_arm64_na.py /tmp/uboot-test-hooks/py/travis-ci/u_boot_boardenv_qemu_arm64_lwip_na.py ln -s travis-ci /tmp/uboot-test-hooks/bin/\`hostname\` ln -s travis-ci /tmp/uboot-test-hooks/py/\`hostname\` grub-mkimage --prefix=\"\" -o ~/grub_x86.efi -O i386-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
@@ -415,6 +419,9 @@ stages: qemu_arm64: TEST_PY_BD: "qemu_arm64" TEST_PY_TEST_SPEC: "not sleep" + qemu_arm64_lwip: + TEST_PY_BD: "qemu_arm64_lwip" + TEST_PY_TEST_SPEC: "test_net_dhcp or test_net_ping or test_net_tftpboot" qemu_m68k: TEST_PY_BD: "M5208EVBE" TEST_PY_ID: "--id qemu"
Signature · 1 line
2.40.1
PATCH v10 20/25 MAINTAINERS: net-lwip: add myself as a maintainer
In reply to Jerome ForissierAdd myself as a maintainer for the lwIP network stack integration code and network commands. The library code itself (i.e., most files under lib/lwip/ except README, Makefile and integration files in u-boot) is unmodified from upstream and therefore does not need a maintainer.
--- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+)
MAINTAINERS +11 -0
@@ -1351,6 +1351,17 @@ F: drivers/net/ F: include/net.h F: net/ +NETWORK (LWIP) +M: Jerome Forissier <[email protected]> +S: Maintained +F: cmd/net-lwip.c +F: configs/qemu_arm64_lwip_defconfig +F: include/net-lwip.h +F: lib/lwip/Makefile +F: lib/lwip/README +F: lib/lwip/u-boot/ +F: net/lwip/ + NIOS M: Thomas Chou <[email protected]> S: Maintained
Signature · 1 line
2.40.1
PATCH v10 21/25 Kconfig: fix undefined symbols (g_dnl*) when NET_LWIP is default enabled
In reply to Jerome ForissierFix for link errors on am62px_evm_a53and other platforms when NET_LWIP is enabled:
common/dfu.c:34:(.text.run_usb_dnl_gadget+0x68): undefined reference to `g_dnl_clear_detach [...]
common/spl/spl_dfu.c:29:(.text.spl_dfu_cmd+0xb0): undefined reference to `run_usb_dnl_gadget'
- DFU_OVER_USB compiles common/dfu.c which calls g_dnl_clear_detach() which is implemented in drivers/usb/gadget/g_dnl.c which needs USB_GADGET_DOWNLOAD
- SPL_DFU compiles common/spl/spl_dfu.c which calls run_usb_dnl_gadget() which is implemented in common/dfu.c which needs DFU_OVER_USB
Therefore add these dependencies to Kconfig.
--- drivers/dfu/Kconfig | 1 + drivers/usb/gadget/Kconfig | 1 + 2 files changed, 2 insertions(+)
drivers/dfu/Kconfig +1 -0
@@ -8,6 +8,7 @@ config DFU_OVER_USB bool select HASH depends on USB_GADGET + depends on USB_GADGET_DOWNLOAD config DFU_OVER_TFTP bool
drivers/usb/gadget/Kconfig +1 -0
@@ -324,6 +324,7 @@ config SPL_DFU select SPL_HASH select SPL_DFU_NO_RESET depends on SPL_RAM_SUPPORT + depends on DFU_OVER_USB help This feature enables the DFU (Device Firmware Upgrade) in SPL with RAM memory device support. The ROM code will load and execute
Signature · 1 line
2.40.1
Re: [PATCH v10 21/25] Kconfig: fix undefined symbols (g_dnl*) when NET_LWIP is default enabled
Quoted 13 lines · Jerome Forissier
Fix for link errors on
am62px_evm_a53andother platforms whenNET_LWIPis enabled:common/dfu.c:34:(.text.run_usb_dnl_gadget+0x68): undefined reference to `g_dnl_clear_detach [...]
common/spl/spl_dfu.c:29:(.text.spl_dfu_cmd+0xb0): undefined reference to `run_usb_dnl_gadget'-
DFU_OVER_USBcompilescommon/dfu.cwhich callsg_dnl_clear_detach()which is implemented indrivers/usb/gadget/g_dnl.cwhich needsUSB_GADGET_DOWNLOAD
-SPL_DFUcompilescommon/spl/spl_dfu.cwhich callsrun_usb_dnl_gadget()which is implemented incommon/dfu.cwhich needsDFU_OVER_USB
Quoted 3 lines
Therefore add these dependencies to
Kconfig.Signed-off-by Jerome Forissier <[email protected]>
Signature · 1 line
Tom
Re: [PATCH v10 21/25] Kconfig: fix undefined symbols (g_dnl*) when NET_LWIP is default enabled
In reply to Jerome ForissierQuoted 26 lines · Jerome Forissier
Fix for link errors on
am62px_evm_a53andother platforms whenNET_LWIPis enabled:common/dfu.c:34:(.text.run_usb_dnl_gadget+0x68): undefined reference to `g_dnl_clear_detach [...]
common/spl/spl_dfu.c:29:(.text.spl_dfu_cmd+0xb0): undefined reference to `run_usb_dnl_gadget'-
DFU_OVER_USBcompilescommon/dfu.cwhich callsg_dnl_clear_detach()which is implemented indrivers/usb/gadget/g_dnl.cwhich needsUSB_GADGET_DOWNLOAD
-SPL_DFUcompilescommon/spl/spl_dfu.cwhich callsrun_usb_dnl_gadget()which is implemented incommon/dfu.cwhich needsDFU_OVER_USBTherefore add these dependencies to
Kconfig.Signed-off-by Jerome Forissier <[email protected]>--- drivers/dfu/Kconfig | 1 + drivers/usb/gadget/Kconfig | 1 + 2 files changed, 2 insertions(+)drivers/dfu/Kconfig +0
-0
drivers/dfu/Kconfig config DFU_OVER_USB · line 11
Quoted 4 lines
drivers/dfu/Kconfig +1
-0@@ -8,6 +8,7 @@ config DFU_OVER_USB bool select HASH depends on USB_GADGET + depends on USB_GADGET_DOWNLOAD
Is it necessary to 'depends' on both USB_GADGET and USB_GADGET_DOWNLOAD ? The later should imply the former is already selected, no ?
drivers/usb/gadget/Kconfig config SPL_DFU · line 327
Quoted 11 lines
drivers/dfu/Kconfig +0
-0config DFU_OVER_TFTP booldrivers/usb/gadget/Kconfig +1
-0@@ -324,6 +324,7 @@ config SPL_DFU select SPL_HASH select SPL_DFU_NO_RESET depends on SPL_RAM_SUPPORT + depends on DFU_OVER_USB
Keep the list sorted please.
Re: [PATCH v10 21/25] Kconfig: fix undefined symbols (g_dnl*) when NET_LWIP is default enabled
Quoted 22 lines · Marek Vasut
Quoted 21 lines · Jerome Forissier
Fix for link errors on
am62px_evm_a53andother platforms whenNET_LWIPis enabled:common/dfu.c:34:(.text.run_usb_dnl_gadget+0x68): undefined reference to `g_dnl_clear_detach [...]
common/spl/spl_dfu.c:29:(.text.spl_dfu_cmd+0xb0): undefined reference to `run_usb_dnl_gadget'-
DFU_OVER_USBcompilescommon/dfu.cwhich callsg_dnl_clear_detach()which is implemented indrivers/usb/gadget/g_dnl.cwhich needsUSB_GADGET_DOWNLOAD
-SPL_DFUcompilescommon/spl/spl_dfu.cwhich callsrun_usb_dnl_gadget()which is implemented incommon/dfu.cwhich needsDFU_OVER_USBTherefore add these dependencies to
Kconfig.Signed-off-by Jerome Forissier <[email protected]>---
drivers/dfu/Kconfig | 1 +
drivers/usb/gadget/Kconfig| 1 +2 files changed, 2 insertions(+)
Quoted 11 lines
Quoted 9 lines
drivers/dfu/Kconfig +0
-0@@ -8,6 +8,7 @@ config DFU_OVER_USBbool
select HASH
depends onUSB_GADGET
+ depends onUSB_GADGET_DOWNLOADIs it necessary to 'depends' on both
USB_GADGETandUSB_GADGET_DOWNLOAD? The later should imply the former is already selected, no ?
Yes, it looks like so. Will fix.
Quoted 13 lines
Quoted 8 lines
config
DFU_OVER_TFTP
booldrivers/usb/gadget/Kconfig +0
-0@@ -324,6 +324,7 @@ config SPL_DFUQuoted 4 lines
select
SPL_HASH
selectSPL_DFU_NO_RESET
depends onSPL_RAM_SUPPORT
+ depends onDFU_OVER_USBKeep the list sorted please.
Sure.
I will post this one separately as I did for other fixes. Thanks for the review.
Signature · 1 line
Jerome
PATCH v10 22/25 configs: use syntax CONFIG_FOO=n in tools-only_defconfig
In reply to Jerome ForissierThe tools-only defconfig causes troubles on MacOSX due to the default C compiler being Clang (LLVM) rather than GCC and more specifically due to [1]. Therefore replace "# CONFIG_FOO is not set" with the equivalent "CONFIG_FOO=n" using the following command:
$ sed -i -e 's/# \(CONFIG_[^ ]*\) is not set/\1=n/' \
configs/tools-only_defconfigThis fixes the tools_only_macOS CI job on GitHub [2].
[1] https://github.com/llvm/llvm-project/issues/78778
[2] https://dev.azure.com/u-boot/u-boot/_build/results?buildId=9105&view=results
--- configs/tools-only_defconfig | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
configs/tools-only_defconfig +16 -16
@@ -4,26 +4,26 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="sandbox" CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y -# CONFIG_SANDBOX_SDL is not set +CONFIG_SANDBOX_SDL=n CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_TIMESTAMP=y CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y -# CONFIG_BOOTSTD_FULL is not set -# CONFIG_BOOTMETH_CROS is not set -# CONFIG_BOOTMETH_VBE is not set +CONFIG_BOOTSTD_FULL=n +CONFIG_BOOTMETH_CROS=n +CONFIG_BOOTMETH_VBE=n CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run distro_bootcmd" -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_BOOTM is not set -# CONFIG_CMD_BOOTI is not set -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_EXTENSION is not set -# CONFIG_CMD_DATE is not set +CONFIG_CMD_BOOTD=n +CONFIG_CMD_BOOTM=n +CONFIG_CMD_BOOTI=n +CONFIG_CMD_ELF=n +CONFIG_CMD_EXTENSION=n +CONFIG_CMD_DATE=n CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NO_NET=y -# CONFIG_ACPIGEN is not set +CONFIG_ACPIGEN=n CONFIG_AXI=y CONFIG_AXI_SANDBOX=y CONFIG_SANDBOX_GPIO=y
@@ -32,9 +32,9 @@ CONFIG_DM_RTC=y CONFIG_SOUND=y CONFIG_SYSRESET=y CONFIG_TIMER=y -# CONFIG_VIRTIO_MMIO is not set -# CONFIG_VIRTIO_PCI is not set -# CONFIG_VIRTIO_SANDBOX is not set -# CONFIG_GENERATE_ACPI_TABLE is not set -# CONFIG_EFI_LOADER is not set +CONFIG_VIRTIO_MMIO=n +CONFIG_VIRTIO_PCI=n +CONFIG_VIRTIO_SANDBOX=n +CONFIG_GENERATE_ACPI_TABLE=n +CONFIG_EFI_LOADER=n CONFIG_TOOLS_MKEFICAPSULE=y
Signature · 1 line
2.40.1
PATCH v10 23/25 configs: set CONFIG_NET=y for FTGMAC100
In reply to Jerome ForissierFTGMAC100 is not compatible with NET_LWIP which was enabled as the default stack in a previous commit. So enable NET in the defconfig.
--- configs/evb-ast2500_defconfig | 1 + configs/evb-ast2600_defconfig | 1 + 2 files changed, 2 insertions(+)
configs/evb-ast2500_defconfig +1 -0
@@ -35,6 +35,7 @@ CONFIG_CMD_NCSI=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_REGMAP=y CONFIG_CLK=y
configs/evb-ast2600_defconfig +1 -0
@@ -78,6 +78,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_SECT_SIZE_AUTO=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y
Signature · 1 line
2.40.1
PATCH v10 24/25 configs: set CONFIG_NET=y when PXE is enabled
In reply to Jerome ForissierMany platforms won't build when NET_LWIP is the default choice in Kconfig:
include/config_distro_bootcmd.h:443:9: error: expected '}' before 'BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE' [...]
Set the legacy stack (CONFIG_NET=y) for these platforms.
--- configs/ad401_defconfig | 1 + configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_qspiboot_defconfig | 1 + configs/am43xx_evm_rtconly_defconfig | 1 + configs/am43xx_evm_usbhost_boot_defconfig | 1 + configs/am43xx_hs_evm_defconfig | 1 + configs/am43xx_hs_evm_qspi_defconfig | 1 + configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/am57xx_hs_evm_usb_defconfig | 1 + configs/arndale_defconfig | 1 + configs/bananapi-cm4-cm4io_defconfig | 1 + configs/bananapi-m2-pro_defconfig | 1 + configs/bananapi-m2s_defconfig | 1 + configs/bananapi-m5_defconfig | 1 + configs/beelink-gsking-x_defconfig | 1 + configs/beelink-gt1-ultimate_defconfig | 1 + configs/beelink-gtking_defconfig | 1 + configs/beelink-gtkingpro_defconfig | 1 + configs/clearfog_defconfig | 1 + configs/clearfog_gt_8k_defconfig | 1 + configs/clearfog_sata_defconfig | 1 + configs/clearfog_spi_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + configs/dra7xx_hs_evm_usb_defconfig | 1 + configs/helios4_defconfig | 1 + configs/imx8mn_var_som_defconfig | 1 + configs/jethub_j100_defconfig | 1 + configs/jethub_j80_defconfig | 1 + configs/khadas-vim2_defconfig | 1 + configs/khadas-vim3_defconfig | 1 + configs/khadas-vim3l_defconfig | 1 + configs/khadas-vim_defconfig | 1 + configs/kontron-sl-mx6ul_defconfig | 1 + configs/kontron-sl-mx8mm_defconfig | 1 + configs/kontron_pitx_imx8m_defconfig | 1 + configs/kontron_sl28_defconfig | 1 + configs/libretech-ac_defconfig | 1 + configs/libretech-cc_defconfig | 1 + configs/libretech-cc_v2_defconfig | 1 + configs/libretech-s905d-pc_defconfig | 1 + configs/libretech-s912-pc_defconfig | 1 + configs/marsboard_defconfig | 1 + configs/mvebu_crb_cn9130_defconfig | 1 + configs/mvebu_db_armada8k_defconfig | 1 + configs/mvebu_db_cn9130_defconfig | 1 + configs/mvebu_mcbin-88f8040_defconfig | 1 + configs/mvebu_puzzle-m801-88f8040_defconfig | 1 + configs/mx53cx9020_defconfig | 1 + configs/mx6cuboxi_defconfig | 1 + configs/mx7dsabresd_defconfig | 1 + configs/mx7dsabresd_qspi_defconfig | 1 + configs/myir_mys_6ulx_defconfig | 1 + configs/nanopi-k2_defconfig | 1 + configs/novena_defconfig | 1 + configs/odroid-c2_defconfig | 1 + configs/odroid-c4_defconfig | 1 + configs/odroid-go-ultra_defconfig | 1 + configs/odroid-hc4_defconfig | 1 + configs/odroid-n2_defconfig | 1 + configs/odroid-n2l_defconfig | 1 + configs/odroid-xu3_defconfig | 1 + configs/p200_defconfig | 1 + configs/p201_defconfig | 1 + configs/p212_defconfig | 1 + configs/peach-pi_defconfig | 1 + configs/peach-pit_defconfig | 1 + configs/phycore_pcl063_defconfig | 1 + configs/pico-dwarf-imx6ul_defconfig | 1 + configs/pico-dwarf-imx7d_defconfig | 1 + configs/pico-hobbit-imx6ul_defconfig | 1 + configs/pico-hobbit-imx7d_defconfig | 1 + configs/pico-imx6ul_defconfig | 1 + configs/pico-imx7d_bl33_defconfig | 1 + configs/pico-imx7d_defconfig | 1 + configs/pico-nymph-imx7d_defconfig | 1 + configs/pico-pi-imx6ul_defconfig | 1 + configs/pico-pi-imx7d_defconfig | 1 + configs/radxa-zero2_defconfig | 1 + configs/radxa-zero_defconfig | 1 + configs/riotboard_defconfig | 1 + configs/s400_defconfig | 1 + configs/seeed_npi_imx6ull_defconfig | 1 + configs/smdk5250_defconfig | 1 + configs/smdk5420_defconfig | 1 + configs/snow_defconfig | 1 + configs/spring_defconfig | 1 + configs/ten64_tfa_defconfig | 1 + configs/turris_mox_defconfig | 1 + configs/turris_omnia_defconfig | 1 + configs/u200_defconfig | 1 + configs/vexpress_aemv8a_juno_defconfig | 1 + configs/vexpress_aemv8a_semi_defconfig | 1 + configs/vexpress_aemv8r_defconfig | 1 + configs/vexpress_ca9x4_defconfig | 1 + configs/vexpress_fvp_defconfig | 1 + configs/videostrong-kii-pro_defconfig | 1 + configs/wandboard_defconfig | 1 + configs/wetek-core2_defconfig | 1 + configs/wetek-hub_defconfig | 1 + configs/wetek-play2_defconfig | 1 + 102 files changed, 102 insertions(+)
configs/ad401_defconfig +1 -0
@@ -56,3 +56,4 @@ CONFIG_USB=y CONFIG_DM_USB_GADGET=y CONFIG_USB_GADGET=y CONFIG_WDT=y +CONFIG_NET=y
configs/am43xx_evm_defconfig +1 -0
@@ -106,3 +106,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00 CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_ETHER=y CONFIG_SPL_USB_ETHER=y +CONFIG_NET=y
configs/am43xx_evm_qspiboot_defconfig +1 -0
@@ -68,3 +68,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0403 CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00 CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_NET=y
configs/am43xx_evm_rtconly_defconfig +1 -0
@@ -85,3 +85,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0403 CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00 CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_NET=y
configs/am43xx_evm_usbhost_boot_defconfig +1 -0
@@ -106,3 +106,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0403 CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00 CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_NET=y
configs/am43xx_hs_evm_defconfig +1 -0
@@ -103,3 +103,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00 CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_ETHER=y CONFIG_SPL_USB_ETHER=y +CONFIG_NET=y
configs/am43xx_hs_evm_qspi_defconfig +1 -0
@@ -69,3 +69,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0403 CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00 CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_NET=y
configs/am57xx_evm_defconfig +1 -0
@@ -120,3 +120,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 CONFIG_LIBAVB=y +CONFIG_NET=y
configs/am57xx_hs_evm_defconfig +1 -0
@@ -116,3 +116,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 CONFIG_LIBAVB=y +CONFIG_NET=y
configs/am57xx_hs_evm_usb_defconfig +1 -0
@@ -117,3 +117,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0451 CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 CONFIG_SPL_DFU=y CONFIG_LIBAVB=y +CONFIG_NET=y
configs/arndale_defconfig +1 -0
@@ -57,3 +57,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_HOST_ETHER=y +CONFIG_NET=y
configs/bananapi-cm4-cm4io_defconfig +1 -0
@@ -88,3 +88,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/bananapi-m2-pro_defconfig +1 -0
@@ -81,3 +81,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/bananapi-m2s_defconfig +1 -0
@@ -86,3 +86,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/bananapi-m5_defconfig +1 -0
@@ -81,3 +81,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/beelink-gsking-x_defconfig +1 -0
@@ -78,3 +78,4 @@ CONFIG_VIDEO_MESON=y CONFIG_VIDEO_DT_SIMPLEFB=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_NET=y
configs/beelink-gt1-ultimate_defconfig +1 -0
@@ -82,3 +82,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/beelink-gtking_defconfig +1 -0
@@ -78,3 +78,4 @@ CONFIG_VIDEO_MESON=y CONFIG_VIDEO_DT_SIMPLEFB=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_NET=y
configs/beelink-gtkingpro_defconfig +1 -0
@@ -78,3 +78,4 @@ CONFIG_VIDEO_MESON=y CONFIG_VIDEO_DT_SIMPLEFB=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_NET=y
configs/clearfog_defconfig +1 -0
@@ -77,3 +77,4 @@ CONFIG_SYS_NS16550=y CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y +CONFIG_NET=y
configs/clearfog_gt_8k_defconfig +1 -0
@@ -81,3 +81,4 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_NET=y
configs/clearfog_sata_defconfig +1 -0
@@ -78,3 +78,4 @@ CONFIG_SYS_NS16550=y CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y +CONFIG_NET=y
configs/clearfog_spi_defconfig +1 -0
@@ -78,3 +78,4 @@ CONFIG_SYS_NS16550=y CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y +CONFIG_NET=y
configs/dra7xx_evm_defconfig +1 -0
@@ -144,3 +144,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 CONFIG_SPL_DFU=y +CONFIG_NET=y
configs/dra7xx_hs_evm_defconfig +1 -0
@@ -138,3 +138,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 CONFIG_SPL_DFU=y +CONFIG_NET=y
configs/dra7xx_hs_evm_usb_defconfig +1 -0
@@ -125,3 +125,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 CONFIG_SPL_DFU=y +CONFIG_NET=y
configs/helios4_defconfig +1 -0
@@ -77,3 +77,4 @@ CONFIG_SYS_NS16550=y CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y +CONFIG_NET=y
configs/imx8mn_var_som_defconfig +1 -0
@@ -114,3 +114,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_IMX_WATCHDOG=y +CONFIG_NET=y
configs/jethub_j100_defconfig +1 -0
@@ -73,3 +73,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xfada CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_RANDOM_UUID=y +CONFIG_NET=y
configs/jethub_j80_defconfig +1 -0
@@ -77,3 +77,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xfada CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_RANDOM_UUID=y +CONFIG_NET=y
configs/khadas-vim2_defconfig +1 -0
@@ -77,3 +77,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e CONFIG_USB_GADGET_PRODUCT_NUM=0xfada CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_NET=y
configs/khadas-vim3_defconfig +1 -0
@@ -102,3 +102,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/khadas-vim3l_defconfig +1 -0
@@ -102,3 +102,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/khadas-vim_defconfig +1 -0
@@ -68,3 +68,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e CONFIG_USB_GADGET_PRODUCT_NUM=0xfada CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_NET=y
configs/kontron-sl-mx6ul_defconfig +1 -0
@@ -109,3 +109,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_NET=y
configs/kontron-sl-mx8mm_defconfig +1 -0
@@ -150,3 +150,4 @@ CONFIG_EFI_SET_TIME=y CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y CONFIG_EFI_CAPSULE_ON_DISK=y CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y +CONFIG_NET=y
configs/kontron_pitx_imx8m_defconfig +1 -0
@@ -114,3 +114,4 @@ CONFIG_USB_DWC3=y CONFIG_EFI_SET_TIME=y CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y +CONFIG_NET=y
configs/kontron_sl28_defconfig +1 -0
@@ -132,3 +132,4 @@ CONFIG_WDT_SP805=y CONFIG_EFI_SET_TIME=y CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y +CONFIG_NET=y
configs/libretech-ac_defconfig +1 -0
@@ -96,3 +96,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/libretech-cc_defconfig +1 -0
@@ -79,3 +79,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/libretech-cc_v2_defconfig +1 -0
@@ -83,3 +83,4 @@ CONFIG_VIDEO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_MESON=y CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_NET=y
configs/libretech-s905d-pc_defconfig +1 -0
@@ -90,3 +90,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/libretech-s912-pc_defconfig +1 -0
@@ -89,3 +89,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/marsboard_defconfig +1 -0
@@ -71,3 +71,4 @@ CONFIG_IMX_HDMI=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y +CONFIG_NET=y
configs/mvebu_crb_cn9130_defconfig +1 -0
@@ -86,3 +86,4 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_NET=y
configs/mvebu_db_armada8k_defconfig +1 -0
@@ -75,3 +75,4 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_NET=y
configs/mvebu_db_cn9130_defconfig +1 -0
@@ -91,3 +91,4 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_NET=y
configs/mvebu_mcbin-88f8040_defconfig +1 -0
@@ -81,3 +81,4 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_NET=y
configs/mvebu_puzzle-m801-88f8040_defconfig +1 -0
@@ -83,3 +83,4 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y # CONFIG_EFI_LOADER is not set +CONFIG_NET=y
configs/mx53cx9020_defconfig +1 -0
@@ -41,3 +41,4 @@ CONFIG_VIDEO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_IPUV3=y CONFIG_IMX_VIDEO_SKIP=y +CONFIG_NET=y
configs/mx6cuboxi_defconfig +1 -0
@@ -93,3 +93,4 @@ CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y CONFIG_IMX_WATCHDOG=y +CONFIG_NET=y
configs/mx7dsabresd_defconfig +1 -0
@@ -89,3 +89,4 @@ CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_IMX_WATCHDOG=y CONFIG_ERRNO_STR=y +CONFIG_NET=y
configs/mx7dsabresd_qspi_defconfig +1 -0
@@ -91,3 +91,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_ERRNO_STR=y +CONFIG_NET=y
configs/myir_mys_6ulx_defconfig +1 -0
@@ -70,3 +70,4 @@ CONFIG_SPL_USB_HOST=y CONFIG_USB_GADGET=y CONFIG_SPL_USB_GADGET=y # CONFIG_RANDOM_UUID is not set +CONFIG_NET=y
configs/nanopi-k2_defconfig +1 -0
@@ -46,3 +46,4 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y +CONFIG_NET=y
configs/novena_defconfig +1 -0
@@ -106,3 +106,4 @@ CONFIG_IMX_VIDEO_SKIP=y CONFIG_IMX_HDMI=y CONFIG_SPLASH_SCREEN=y CONFIG_BMP_16BPP=y +CONFIG_NET=y
configs/odroid-c2_defconfig +1 -0
@@ -71,3 +71,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/odroid-c4_defconfig +1 -0
@@ -82,3 +82,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/odroid-go-ultra_defconfig +1 -0
@@ -75,3 +75,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xfada CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_NET=y
configs/odroid-hc4_defconfig +1 -0
@@ -99,3 +99,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/odroid-n2_defconfig +1 -0
@@ -79,3 +79,4 @@ CONFIG_VIDEO_DT_SIMPLEFB=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/odroid-n2l_defconfig +1 -0
@@ -74,3 +74,4 @@ CONFIG_VIDEO_DT_SIMPLEFB=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/odroid-xu3_defconfig +1 -0
@@ -72,3 +72,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x04e8 CONFIG_USB_GADGET_PRODUCT_NUM=0x6601 CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_ERRNO_STR=y +CONFIG_NET=y
configs/p200_defconfig +1 -0
@@ -45,3 +45,4 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y +CONFIG_NET=y
configs/p201_defconfig +1 -0
@@ -46,3 +46,4 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y +CONFIG_NET=y
configs/p212_defconfig +1 -0
@@ -54,3 +54,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_MESON_GXL=y +CONFIG_NET=y
configs/peach-pi_defconfig +1 -0
@@ -90,3 +90,4 @@ CONFIG_VIDEO_BRIDGE=y CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y CONFIG_TPM=y CONFIG_ERRNO_STR=y +CONFIG_NET=y
configs/peach-pit_defconfig +1 -0
@@ -89,3 +89,4 @@ CONFIG_VIDEO_BRIDGE=y CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y CONFIG_TPM=y CONFIG_ERRNO_STR=y +CONFIG_NET=y
configs/phycore_pcl063_defconfig +1 -0
@@ -68,3 +68,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x4fff CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y # CONFIG_RANDOM_UUID is not set +CONFIG_NET=y
configs/pico-dwarf-imx6ul_defconfig +1 -0
@@ -79,3 +79,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_NET=y
configs/pico-dwarf-imx7d_defconfig +1 -0
@@ -95,3 +95,4 @@ CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y +CONFIG_NET=y
configs/pico-hobbit-imx6ul_defconfig +1 -0
@@ -82,3 +82,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_NET=y
configs/pico-hobbit-imx7d_defconfig +1 -0
@@ -94,3 +94,4 @@ CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y +CONFIG_NET=y
configs/pico-imx6ul_defconfig +1 -0
@@ -90,3 +90,4 @@ CONFIG_VIDEO_LOGO=y CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_NET=y
configs/pico-imx7d_bl33_defconfig +1 -0
@@ -94,3 +94,4 @@ CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y +CONFIG_NET=y
configs/pico-imx7d_defconfig +1 -0
@@ -96,3 +96,4 @@ CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y +CONFIG_NET=y
configs/pico-nymph-imx7d_defconfig +1 -0
@@ -95,3 +95,4 @@ CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y +CONFIG_NET=y
configs/pico-pi-imx6ul_defconfig +1 -0
@@ -82,3 +82,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_NET=y
configs/pico-pi-imx7d_defconfig +1 -0
@@ -98,3 +98,4 @@ CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y CONFIG_IMX_WATCHDOG=y +CONFIG_NET=y
configs/radxa-zero2_defconfig +1 -0
@@ -77,3 +77,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/radxa-zero_defconfig +1 -0
@@ -73,3 +73,4 @@ CONFIG_VIDEO_MESON=y CONFIG_VIDEO_DT_SIMPLEFB=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_NET=y
configs/riotboard_defconfig +1 -0
@@ -89,3 +89,4 @@ CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y CONFIG_SPL_OF_LIBFDT=y +CONFIG_NET=y
configs/s400_defconfig +1 -0
@@ -60,3 +60,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e CONFIG_USB_GADGET_PRODUCT_NUM=0xfada CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_NET=y
configs/seeed_npi_imx6ull_defconfig +1 -0
@@ -75,3 +75,4 @@ CONFIG_SPL_USB_HOST=y CONFIG_USB_GADGET=y CONFIG_SPL_USB_GADGET=y # CONFIG_RANDOM_UUID is not set +CONFIG_NET=y
configs/smdk5250_defconfig +1 -0
@@ -73,3 +73,4 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX88179=y CONFIG_ERRNO_STR=y +CONFIG_NET=y
configs/smdk5420_defconfig +1 -0
@@ -58,3 +58,4 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_HOST_ETHER=y +CONFIG_NET=y
configs/snow_defconfig +1 -0
@@ -108,3 +108,4 @@ CONFIG_VIDEO_BRIDGE_NXP_PTN3460=y CONFIG_TPM=y CONFIG_ERRNO_STR=y CONFIG_UNIT_TEST=y +CONFIG_NET=y
configs/spring_defconfig +1 -0
@@ -101,3 +101,4 @@ CONFIG_VIDEO_BRIDGE=y CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y CONFIG_TPM=y CONFIG_ERRNO_STR=y +CONFIG_NET=y
configs/ten64_tfa_defconfig +1 -0
@@ -97,3 +97,4 @@ CONFIG_WDT=y CONFIG_WDT_SP805=y CONFIG_TPM=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_NET=y
configs/turris_mox_defconfig +1 -0
@@ -106,3 +106,4 @@ CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y CONFIG_WDT=y CONFIG_WDT_ARMADA_37XX=y +CONFIG_NET=y
configs/turris_omnia_defconfig +1 -0
@@ -129,3 +129,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_WDT=y CONFIG_WDT_ORION=y +CONFIG_NET=y
configs/u200_defconfig +1 -0
@@ -63,3 +63,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xfada CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_NET=y
configs/vexpress_aemv8a_juno_defconfig +1 -0
@@ -36,3 +36,4 @@ CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=259 CONFIG_USB=y +CONFIG_NET=y
configs/vexpress_aemv8a_semi_defconfig +1 -0
@@ -31,3 +31,4 @@ CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=256 +CONFIG_NET=y
configs/vexpress_aemv8r_defconfig +1 -0
@@ -14,3 +14,4 @@ CONFIG_SYS_PBSIZE=541 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="VExpress64# " # CONFIG_MMC is not set +CONFIG_NET=y
configs/vexpress_ca9x4_defconfig +1 -0
@@ -36,6 +36,7 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y +CONFIG_NET=y CONFIG_CLK=y CONFIG_ARM_PL180_MMCI=y CONFIG_SYS_MMC_MAX_BLK_COUNT=127
configs/vexpress_fvp_defconfig +1 -0
@@ -3,3 +3,4 @@ CONFIG_ARCH_VEXPRESS64=y CONFIG_DEFAULT_DEVICE_TREE="arm_fvp" CONFIG_IDENT_STRING=" arm_fvp" # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_NET=y
configs/videostrong-kii-pro_defconfig +1 -0
@@ -69,3 +69,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/wandboard_defconfig +1 -0
@@ -91,3 +91,4 @@ CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y CONFIG_IMX_WATCHDOG=y +CONFIG_NET=y
configs/wetek-core2_defconfig +1 -0
@@ -76,3 +76,4 @@ CONFIG_VIDEO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_MESON=y CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_NET=y
configs/wetek-hub_defconfig +1 -0
@@ -69,3 +69,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
configs/wetek-play2_defconfig +1 -0
@@ -69,3 +69,4 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_NET=y
Signature · 1 line
2.40.1
PATCH v10 25/25 Kconfig: enable NET_LWIP by default except for SANDBOX
In reply to Jerome ForissierEnable NET_LWIP by default for testing purposes. SANDBOX doesn't support NET_LWIP so default to NET in this case.
--- Kconfig | 1 + 1 file changed, 1 insertion(+)
Kconfig +1 -0
@@ -756,6 +756,7 @@ menu Networking choice prompt "Networking stack" + default NET_LWIP if !SANDBOX default NET config NO_NET
Signature · 1 line
2.40.1
Quoted 10 lines · Jerome Forissier
This is a rework of a patch series by Maxim Uvarov: "net/lwip: add lwip library for the network stack" [1]. The goal is to introduce the lwIP TCP/IP stack [2] [3] as an alternative to the current implementation in
net/, selectable withKconfig, and ultimately keep only lwIP if possible. Some reasons for doing so are:
- Make the support of HTTPS in the wget command easier. Javier T. and Raymond M. (CC'd) have some additional lwIP and Mbed TLS patches to do so. With that it becomes possible to fetch and launch a distro installer such as Debian etc. using a secure, authenticated connection directly from the U-Boot shell. Several use cases:
Quoted 8 lines
* Authentication: prevent MITM attack (third party replacing the
binary with a different one)
* Confidentiality: prevent third parties from grabbing a copy of the
image as it is being downloaded
* Allow connection to servers that do not support plain HTTP anymore
(this is becoming more and more common on the Internet these days)
- Possibly benefit from additional features implemented in lwIP
- Less code to maintain in U-Boot
On am64x-sk (am64x_evm_a53_defconfig) I'm seeing:
=> tftpboot 80200000 EFI/arm64/grubaa64.efi
Using ethernet@8000000port@1 device
TFTP from server 192.168.116.10; our IP address is 192.168.116.23 Filename 'EFI/arm64/grubaa64.efi'.
Load address: 0x80200000
Loading:
... silent hang ...
Which I didn't see with v9. I can test other TI K3 platforms if it would help.
Signature · 1 line
Tom
Quoted 30 lines · Tom Rini
Quoted 10 lines · Jerome Forissier
This is a rework of a patch series by Maxim Uvarov: "net/lwip: add lwip library for the network stack" [1]. The goal is to introduce the lwIP TCP/IP stack [2] [3] as an alternative to the current implementation in
net/, selectable withKconfig, and ultimately keep only lwIP if possible. Some reasons for doing so are:
- Make the support of HTTPS in the wget command easier. Javier T. and Raymond M. (CC'd) have some additional lwIP and Mbed TLS patches to do so. With that it becomes possible to fetch and launch a distro installer such as Debian etc. using a secure, authenticated connection directly from the U-Boot shell. Several use cases:Quoted 8 lines
* Authentication: prevent MITM attack (third party replacing the
binary with a different one)
* Confidentiality: prevent third parties from grabbing a copy of the
image as it is being downloaded
* Allow connection to servers that do not support plain HTTP anymore
(this is becoming more and more common on the Internet these days)
- Possibly benefit from additional features implemented in lwIP
- Less code to maintain in U-BootOn am64x-sk (
am64x_evm_a53_defconfig) I'm seeing:
=> tftpboot 80200000 EFI/arm64/grubaa64.efi
Using ethernet@8000000port@1 device
TFTP from server 192.168.116.10; our IP address is 192.168.116.23 Filename 'EFI/arm64/grubaa64.efi'.
Load address:0x80200000
Loading:
... silent hang ...
Quoted 2 lines
Which I didn't see with v9. I can test other TI K3 platforms if it would help.
Weird. I compared v9 and v10 (rebased onto the same commit as v9) but I saw nothing obvious. Would you mind running the test again with these traces added?
net/lwip/net-lwip.c +6 -1
@@ -35,6 +35,7 @@ static err_t linkoutput(struct netif *netif, struct pbuf *p)void *pp =NULL ;int err; +printf ("[OUT|%d]" , p->len);if ((unsigned long )p->payload %PKTALIGN ) {/* * Some net drivers have strict alignment requirements and may
@@ -252,12 +253,16 @@ int net_lwip_rx(struct udevice *udev, struct netif *netif)int len;int i; -if (!eth_is_active (udev)) +printf ("[IN]" ); +if (!eth_is_active (udev)) { +printf ("ERR: !eth_is_active()\n" );return -EINVAL ; + } flags =ETH_RECV_CHECK_DEVICE ;for (i =0 ; i <ETH_PACKETS_BATCH_RECV ; i++) { len =eth_get_ops (udev)->recv (udev, flags, &packet); +printf ("[IN|%d]" , len); flags =0 ;if (len >0 ) {
Thanks,
Signature · 1 line
Jerome
Quoted 60 lines · Jerome Forissier
Quoted 30 lines · Tom Rini
Quoted 10 lines · Jerome Forissier
This is a rework of a patch series by Maxim Uvarov: "net/lwip: add lwip library for the network stack" [1]. The goal is to introduce the lwIP TCP/IP stack [2] [3] as an alternative to the current implementation in
net/, selectable withKconfig, and ultimately keep only lwIP if possible. Some reasons for doing so are:
- Make the support of HTTPS in the wget command easier. Javier T. and Raymond M. (CC'd) have some additional lwIP and Mbed TLS patches to do so. With that it becomes possible to fetch and launch a distro installer such as Debian etc. using a secure, authenticated connection directly from the U-Boot shell. Several use cases:Quoted 8 lines
* Authentication: prevent MITM attack (third party replacing the
binary with a different one)
* Confidentiality: prevent third parties from grabbing a copy of the
image as it is being downloaded
* Allow connection to servers that do not support plain HTTP anymore
(this is becoming more and more common on the Internet these days)
- Possibly benefit from additional features implemented in lwIP
- Less code to maintain in U-BootOn am64x-sk (
am64x_evm_a53_defconfig) I'm seeing:
=> tftpboot 80200000 EFI/arm64/grubaa64.efi
Using ethernet@8000000port@1 device
TFTP from server 192.168.116.10; our IP address is 192.168.116.23 Filename 'EFI/arm64/grubaa64.efi'.
Load address:0x80200000
Loading:
... silent hang ...Quoted 2 lines
Which I didn't see with v9. I can test other TI K3 platforms if it would help.
Weird. I compared v9 and v10 (rebased onto the same commit as v9) but I saw nothing obvious. Would you mind running the test again with these traces added?
net/lwip/net-lwip.c +4
-1@@ -35,6 +35,7 @@ static err_t linkoutput(struct netif *netif, struct pbuf *p)void *pp =NULL ;int err; +printf ("[OUT|%d]" , p->len);if ((unsigned long )p->payload %PKTALIGN ) {/* * Some net drivers have strict alignment requirements and may @@ -252,12 +253,16 @@ int net_lwip_rx(struct udevice *udev, struct netif *netif)int len;int i; -if (!eth_is_active (udev)) +printf ("[IN]" ); +if (!eth_is_active (udev)) { +printf ("ERR: !eth_is_active()\n" );
net/lwip/net-lwip.c int net_lwip_rx(struct udevice *udev, struct netif *netif) · line 268
Quoted 10 lines
net/lwip/net-lwip.c +2
-0return -EINVAL ; + } flags =ETH_RECV_CHECK_DEVICE ;for (i =0 ; i <ETH_PACKETS_BATCH_RECV ; i++) { len =eth_get_ops (udev)->recv (udev, flags, &packet); +printf ("[IN|%d]" , len); flags =0 ;if (len >0 ) {
I have the log, if it helps. However, with debug prints added, now it completes. And I can see (as part of trimming down my test setup) that without the prints, some tests are OK. The much smaller "helloworld.efi" file and test is fine.
Signature · 1 line
Tom
Quoted 70 lines · Tom Rini
Quoted 69 lines · Jerome Forissier
Quoted 30 lines · Tom Rini
Quoted 10 lines · Jerome Forissier
This is a rework of a patch series by Maxim Uvarov: "net/lwip: add lwip library for the network stack" [1]. The goal is to introduce the lwIP TCP/IP stack [2] [3] as an alternative to the current implementation in
net/, selectable withKconfig, and ultimately keep only lwIP if possible. Some reasons for doing so are:
- Make the support of HTTPS in the wget command easier. Javier T. and Raymond M. (CC'd) have some additional lwIP and Mbed TLS patches to do so. With that it becomes possible to fetch and launch a distro installer such as Debian etc. using a secure, authenticated connection directly from the U-Boot shell. Several use cases:Quoted 8 lines
* Authentication: prevent MITM attack (third party replacing the
binary with a different one)
* Confidentiality: prevent third parties from grabbing a copy of the
image as it is being downloaded
* Allow connection to servers that do not support plain HTTP anymore
(this is becoming more and more common on the Internet these days)
- Possibly benefit from additional features implemented in lwIP
- Less code to maintain in U-BootOn am64x-sk (
am64x_evm_a53_defconfig) I'm seeing:
=> tftpboot 80200000 EFI/arm64/grubaa64.efi
Using ethernet@8000000port@1 device
TFTP from server 192.168.116.10; our IP address is 192.168.116.23 Filename 'EFI/arm64/grubaa64.efi'.
Load address:0x80200000
Loading:
... silent hang ...Quoted 2 lines
Which I didn't see with v9. I can test other TI K3 platforms if it would help.
Weird. I compared v9 and v10 (rebased onto the same commit as v9) but I saw nothing obvious. Would you mind running the test again with these traces added?
net/lwip/net-lwip.c +6
-1@@ -35,6 +35,7 @@ static err_t linkoutput(struct netif *netif, struct pbuf *p)void *pp =NULL ;int err; +printf ("[OUT|%d]" , p->len);if ((unsigned long )p->payload %PKTALIGN ) {/* * Some net drivers have strict alignment requirements and may @@ -252,12 +253,16 @@ int net_lwip_rx(struct udevice *udev, struct netif *netif)int len;int i; -if (!eth_is_active (udev)) +printf ("[IN]" ); +if (!eth_is_active (udev)) { +printf ("ERR: !eth_is_active()\n" );return -EINVAL ; + } flags =ETH_RECV_CHECK_DEVICE ;for (i =0 ; i <ETH_PACKETS_BATCH_RECV ; i++) { len =eth_get_ops (udev)->recv (udev, flags, &packet); +printf ("[IN|%d]" , len); flags =0 ;
Quoted 4 lines
net/lwip/net-lwip.c int net_lwip_rx(struct udevice *udev, struct netif *netif) · line 268
Quoted 1 line
net/lwip/net-lwip.c +0
-0if (len >0 ) {I have the log, if it helps. However, with debug prints added, now it completes.
Duh! :-/
Quoted 3 lines
And I can see (as part of trimming down my test setup) that without the prints, some tests are OK. The much smaller "helloworld.efi" file and test is fine.
I suspect we might be hitting the test framework timeout, because TFTP with lwIP is slower than with the legacy stack as mentioned in [1] (lack of window size support). Although it seems weird that you don't see the hash signs at all, as if no data were received?
Regards,
Signature · 1 line
Jerome
Quoted 80 lines · Jerome Forissier
Quoted 70 lines · Tom Rini
Quoted 69 lines · Jerome Forissier
Quoted 30 lines · Tom Rini
Quoted 10 lines · Jerome Forissier
This is a rework of a patch series by Maxim Uvarov: "net/lwip: add lwip library for the network stack" [1]. The goal is to introduce the lwIP TCP/IP stack [2] [3] as an alternative to the current implementation in
net/, selectable withKconfig, and ultimately keep only lwIP if possible. Some reasons for doing so are:
- Make the support of HTTPS in the wget command easier. Javier T. and Raymond M. (CC'd) have some additional lwIP and Mbed TLS patches to do so. With that it becomes possible to fetch and launch a distro installer such as Debian etc. using a secure, authenticated connection directly from the U-Boot shell. Several use cases:Quoted 8 lines
* Authentication: prevent MITM attack (third party replacing the
binary with a different one)
* Confidentiality: prevent third parties from grabbing a copy of the
image as it is being downloaded
* Allow connection to servers that do not support plain HTTP anymore
(this is becoming more and more common on the Internet these days)
- Possibly benefit from additional features implemented in lwIP
- Less code to maintain in U-BootOn am64x-sk (
am64x_evm_a53_defconfig) I'm seeing:
=> tftpboot 80200000 EFI/arm64/grubaa64.efi
Using ethernet@8000000port@1 device
TFTP from server 192.168.116.10; our IP address is 192.168.116.23 Filename 'EFI/arm64/grubaa64.efi'.
Load address:0x80200000
Loading:
... silent hang ...Quoted 2 lines
Which I didn't see with v9. I can test other TI K3 platforms if it would help.
Weird. I compared v9 and v10 (rebased onto the same commit as v9) but I saw nothing obvious. Would you mind running the test again with these traces added?
net/lwip/net-lwip.c +6
-1@@ -35,6 +35,7 @@ static err_t linkoutput(struct netif *netif, struct pbuf *p)void *pp =NULL ;int err; +printf ("[OUT|%d]" , p->len);if ((unsigned long )p->payload %PKTALIGN ) {/* * Some net drivers have strict alignment requirements and may @@ -252,12 +253,16 @@ int net_lwip_rx(struct udevice *udev, struct netif *netif)int len;int i; -if (!eth_is_active (udev)) +printf ("[IN]" ); +if (!eth_is_active (udev)) { +printf ("ERR: !eth_is_active()\n" );return -EINVAL ; + } flags =ETH_RECV_CHECK_DEVICE ;for (i =0 ; i <ETH_PACKETS_BATCH_RECV ; i++) { len =eth_get_ops (udev)->recv (udev, flags, &packet); +printf ("[IN|%d]" , len); flags =0 ;Quoted 4 lines
net/lwip/net-lwip.c int net_lwip_rx(struct udevice *udev, struct netif *netif) · line 268
Quoted 1 line
net/lwip/net-lwip.c +0
-0if (len >0 ) {I have the log, if it helps. However, with debug prints added, now it completes.
Duh! :-/
Quoted 8 lines
Quoted 3 lines
And I can see (as part of trimming down my test setup) that without the prints, some tests are OK. The much smaller "helloworld.efi" file and test is fine.
I suspect we might be hitting the test framework timeout, because TFTP with lwIP is slower than with the legacy stack as mentioned in [1] (lack of window size support). Although it seems weird that you don't see the hash signs at all, as if no data were received?
Yeah, it's acting like no data was received or otherwise just locked up. If you have a beagleplay it should also show the problem. I can try and find some time to check it out, outside the test framework, but also the Pi platforms pass this test fine (same binary, same physical network).
Signature · 1 line
Tom
Quoted 85 lines · Tom Rini
Quoted 84 lines · Jerome Forissier
Quoted 70 lines · Tom Rini
Quoted 69 lines · Jerome Forissier
Quoted 30 lines · Tom Rini
Quoted 10 lines · Jerome Forissier
This is a rework of a patch series by Maxim Uvarov: "net/lwip: add lwip library for the network stack" [1]. The goal is to introduce the lwIP TCP/IP stack [2] [3] as an alternative to the current implementation in
net/, selectable withKconfig, and ultimately keep only lwIP if possible. Some reasons for doing so are:
- Make the support of HTTPS in the wget command easier. Javier T. and Raymond M. (CC'd) have some additional lwIP and Mbed TLS patches to do so. With that it becomes possible to fetch and launch a distro installer such as Debian etc. using a secure, authenticated connection directly from the U-Boot shell. Several use cases:Quoted 8 lines
* Authentication: prevent MITM attack (third party replacing the
binary with a different one)
* Confidentiality: prevent third parties from grabbing a copy of the
image as it is being downloaded
* Allow connection to servers that do not support plain HTTP anymore
(this is becoming more and more common on the Internet these days)
- Possibly benefit from additional features implemented in lwIP
- Less code to maintain in U-BootOn am64x-sk (
am64x_evm_a53_defconfig) I'm seeing:
=> tftpboot 80200000 EFI/arm64/grubaa64.efi
Using ethernet@8000000port@1 device
TFTP from server 192.168.116.10; our IP address is 192.168.116.23 Filename 'EFI/arm64/grubaa64.efi'.
Load address:0x80200000
Loading:
... silent hang ...Quoted 2 lines
Which I didn't see with v9. I can test other TI K3 platforms if it would help.
Weird. I compared v9 and v10 (rebased onto the same commit as v9) but I saw nothing obvious. Would you mind running the test again with these traces added?
net/lwip/net-lwip.c +6
-1@@ -35,6 +35,7 @@ static err_t linkoutput(struct netif *netif, struct pbuf *p)void *pp =NULL ;int err; +printf ("[OUT|%d]" , p->len);if ((unsigned long )p->payload %PKTALIGN ) {/* * Some net drivers have strict alignment requirements and may @@ -252,12 +253,16 @@ int net_lwip_rx(struct udevice *udev, struct netif *netif)int len;int i; -if (!eth_is_active (udev)) +printf ("[IN]" ); +if (!eth_is_active (udev)) { +printf ("ERR: !eth_is_active()\n" );return -EINVAL ; + } flags =ETH_RECV_CHECK_DEVICE ;for (i =0 ; i <ETH_PACKETS_BATCH_RECV ; i++) { len =eth_get_ops (udev)->recv (udev, flags, &packet); +printf ("[IN|%d]" , len); flags =0 ;Quoted 4 lines
net/lwip/net-lwip.c int net_lwip_rx(struct udevice *udev, struct netif *netif) · line 268
Quoted 1 line
net/lwip/net-lwip.c +0
-0if (len >0 ) {I have the log, if it helps. However, with debug prints added, now it completes.
Duh! :-/
Quoted 3 lines
And I can see (as part of trimming down my test setup) that without the prints, some tests are OK. The much smaller "helloworld.efi" file and test is fine.
Quoted 6 lines
Quoted 4 lines
I suspect we might be hitting the test framework timeout, because TFTP with lwIP is slower than with the legacy stack as mentioned in [1] (lack of window size support). Although it seems weird that you don't see the hash signs at all, as if no data were received?
Yeah, it's acting like no data was received or otherwise just locked up.
OK
Quoted 1 line
If you have a beagleplay it should also show the problem.
Unfortunately no, I don't have the hardware.
Quoted 2 lines
I can try and
find some time to check it out, outside the test framework, but also the> Pi platforms pass this test fine (same binary, same physical network).
That would be great because I don't have any better suggestion...
In the meantime I do have v11 ready, with one minor fix, patches removed (posted separately) and more importantly a change to enable CMD_PXE. From the upcoming changelog:
===
- Add (some) support for CMD_PXE and therefore drop patch "[TESTING]
configs: set CONFIG_NET=y when PXE is enabled". This is build-tested only and it is very likely that some work is needed to make it useful. For example, adding the code for DHCP option 209 to lwIP so that BOOTP_PXE_DHCP_OPTION can be supported.
===
Would you like me to post this v11 today, or do you prefer we sort out the TFTP issue with TI K3 first?
Thanks again for you support on this series!
Regards,
Signature · 1 line
Jerome