Skip to contentSkip to conversation

Threshold event and Sampling freq support for LTR390

PATCH Superseded Abhash Jha 2 participants 11 messages Sep 10, 2024 – Sep 14, 2024

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Abhash Jha

author
#0 lore raw

v2 cover Threshold event and Sampling freq support for LTR390

Hello,

The first patch adds support for configuring the Sampling frequency of the sensor. The available values for the sampling freqeuncy are provided by the read_avail callback and they are in miliHertz.

Then the second patch adds support for suspending and resuming the sensor by providing the necessary callbacks. And registering the ops with the driver.

The third patch in the series adds support for Threshold events and interrupts. Exposed rising and falling threshold events for both the channels. The events can be configured via the write_event_config callback. The desired rising or falling threshold value can be written to from userspace.

The fourth patch adds support for threshold interrupt persistance.
It triggers when the UVS/ALS data is out of thresholds for a specific number of consecutive measurements.
Exposed the IIO_EV_INFO_PERIOD attribute by which userspace can set the persistance value in miliseconds. The persistance period should be greater than or equal to the sampling period.

Changes in v2:
- Added "linux/irq.h" include to fix -Wimplicit-function-declaration.
- The above error was pointed during testing by kernel-test-robot

Thanks,
Abhash

Abhash Jha (4):
iio: light: ltr390: Added configurable sampling frequency support
iio: light: ltr390: Suspend and Resume support
iio: light: ltr390: Interrupts and threshold event support
iio: light: ltr390: Add interrupt persistance support

 drivers/iio/light/ltr390.c | 363 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 361 insertions(+), 2 deletions(-)
Signature · 1 line
2.43.0
author
#1 lore raw

PATCH v2 1/4 iio: light: ltr390: Added configurable sampling frequency support

Provied configurable sampling frequency(Measurement rate) support. Also exposed the available sampling frequency values using read_avail callback.

---
 drivers/iio/light/ltr390.c | 68 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 66 insertions(+), 2 deletions(-)
drivers/iio/light/ltr390.c +66 -2
index 7e58b50f3..73ef4a5a0 100644
@@ -39,6 +39,7 @@
 
 #define LTR390_PART_NUMBER_ID		0xb
 #define LTR390_ALS_UVS_GAIN_MASK	0x07
+#define LTR390_ALS_UVS_MEAS_RATE_MASK	0x07
 #define LTR390_ALS_UVS_INT_TIME_MASK	0x70
 #define LTR390_ALS_UVS_INT_TIME(x)	FIELD_PREP(LTR390_ALS_UVS_INT_TIME_MASK, (x))
 
@@ -87,6 +88,18 @@ static const struct regmap_config ltr390_regmap_config = {
 	.val_bits = 8,
 };
 
+/* Sampling frequency is in mili Hz and mili Seconds */
+static const int ltr390_samp_freq_table[][2] = {
+		[0] = {40000, 25},
+		[1] = {20000, 50},
+		[2] = {10000, 100},
+		[3] = {5000, 200},
+		[4] = {2000, 500},
+		[5] = {1000, 1000},
+		[6] = {500, 2000},
+		[7] = {500, 2000}
+};
+
 static int ltr390_register_read(struct ltr390_data *data, u8 register_address)
 {
 	struct device *dev = &data->client->dev;
@@ -135,6 +148,18 @@ static int ltr390_counts_per_uvi(struct ltr390_data *data)
 	return DIV_ROUND_CLOSEST(23 * data->gain * data->int_time_us, 10 * orig_gain * orig_int_time);
 }
 
+static int ltr390_get_samp_freq(struct ltr390_data *data)
+{
+	int ret, value;
+
+	ret = regmap_read(data->regmap, LTR390_ALS_UVS_MEAS_RATE, &value);
+	if (ret < 0)
+		return ret;
+	value &= LTR390_ALS_UVS_MEAS_RATE_MASK;
+
+	return ltr390_samp_freq_table[value][0];
+}
+
 static int ltr390_read_raw(struct iio_dev *iio_device,
 			   struct iio_chan_spec const *chan, int *val,
 			   int *val2, long mask)
@@ -191,6 +216,10 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 		*val = data->int_time_us;
 		return IIO_VAL_INT;
 
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = ltr390_get_samp_freq(data);
+		return IIO_VAL_INT;
+
 	default:
 		return -EINVAL;
 	}
@@ -199,6 +228,7 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 /* integration time in us */
 static const int ltr390_int_time_map_us[] = { 400000, 200000, 100000, 50000, 25000, 12500 };
 static const int ltr390_gain_map[] = { 1, 3, 6, 9, 18 };
+static const int ltr390_freq_map[] = { 40000, 20000, 10000, 5000, 2000, 1000, 500, 500 };
 
 static const struct iio_chan_spec ltr390_channels[] = {
 	/* UV sensor */
@@ -206,16 +236,18 @@ static const struct iio_chan_spec ltr390_channels[] = {
 		.type = IIO_UVINDEX,
 		.scan_index = 0,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
+						| BIT(IIO_CHAN_INFO_SAMP_FREQ)
 	},
 	/* ALS sensor */
 	{
 		.type = IIO_LIGHT,
 		.scan_index = 1,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
+						| BIT(IIO_CHAN_INFO_SAMP_FREQ)
 	},
 };
 
@@ -264,6 +296,27 @@ static int ltr390_set_int_time(struct ltr390_data *data, int val)
 	return -EINVAL;
 }
 
+static int ltr390_set_samp_freq(struct ltr390_data *data, int val)
+{
+	int ret, idx;
+
+	for (idx = 0; idx < ARRAY_SIZE(ltr390_samp_freq_table); idx++) {
+		if (ltr390_samp_freq_table[idx][0] != val)
+			continue;
+
+		guard(mutex)(&data->lock);
+		ret = regmap_update_bits(data->regmap,
+					LTR390_ALS_UVS_MEAS_RATE,
+					LTR390_ALS_UVS_MEAS_RATE_MASK, idx);
+		if (ret)
+			return ret;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 static int ltr390_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
 				const int **vals, int *type, int *length, long mask)
 {
@@ -278,6 +331,11 @@ static int ltr390_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec con
 		*type = IIO_VAL_INT;
 		*vals = ltr390_int_time_map_us;
 		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*length = ARRAY_SIZE(ltr390_freq_map);
+		*type = IIO_VAL_INT;
+		*vals = ltr390_freq_map;
+		return IIO_AVAIL_LIST;
 	default:
 		return -EINVAL;
 	}
@@ -301,6 +359,12 @@ static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons
 
 		return ltr390_set_int_time(data, val);
 
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2 != 0)
+			return -EINVAL;
+
+		return ltr390_set_samp_freq(data, val);
+
 	default:
 		return -EINVAL;
 	}
Signature · 1 line
2.43.0
maintainer
#2 lore raw

Re: [PATCH v2 1/4] iio: light: ltr390: Added configurable sampling frequency support

Quoted 1 line · On Tue, 10 Sep 2024 10:20:26 +0530 Abhash Jha <[email protected]>…

Provied configurable sampling frequency(Measurement rate) support.

Spell check: Provide

Quoted 4 lines

Also exposed the available sampling frequency values using read_avail callback.

Hi Abhash,

A few minor comments inline and an (optional) request to cleanup the mask definitions in the existing code.

drivers/iio/light/ltr390.c line 42

Quoted 13 lines
---
 drivers/iio/light/ltr390.c | 68 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 66 insertions(+), 2 deletions(-)
drivers/iio/light/ltr390.c +1 -0
index 7e58b50f3..73ef4a5a0 100644
@@ -39,6 +39,7 @@
 
 #define LTR390_PART_NUMBER_ID		0xb
 #define LTR390_ALS_UVS_GAIN_MASK	0x07
+#define LTR390_ALS_UVS_MEAS_RATE_MASK	0x07

These masks should be converted to GENMASK(). If you don't mind doing it a precursor patch to do so would be nice to have.

However whether or not you cleanup existing mask definitions, please use GENMASK() for this new one.

drivers/iio/light/ltr390.c static const struct regmap_config ltr390_regmap_config = { · line 93

Quoted 10 lines
drivers/iio/light/ltr390.c +3 -0
 #define LTR390_ALS_UVS_INT_TIME_MASK	0x70
 #define LTR390_ALS_UVS_INT_TIME(x)	FIELD_PREP(LTR390_ALS_UVS_INT_TIME_MASK, (x))
 
@@ -87,6 +88,18 @@ static const struct regmap_config ltr390_regmap_config = {
 	.val_bits = 8,
 };
 
+/* Sampling frequency is in mili Hz and mili Seconds */
+static const int ltr390_samp_freq_table[][2] = {
+		[0] = {40000, 25},

I'm trying to slowly get IIO to standardise strongly around

		[0] = { 4000, 25 },

etc. So space after { and before }

drivers/iio/light/ltr390.c static const struct regmap_config ltr390_regmap_config = { · line 100

Quoted 7 lines
drivers/iio/light/ltr390.c +7 -0
+		[1] = {20000, 50},
+		[2] = {10000, 100},
+		[3] = {5000, 200},
+		[4] = {2000, 500},
+		[5] = {1000, 1000},
+		[6] = {500, 2000},
+		[7] = {500, 2000}

Add a trailing comma. Sure we probably will never get any more entries but it isn't a terminator entry so convention is put the comma anyway.

Quoted 7 lines
drivers/iio/light/ltr390.c +2 -0
+};
+
 static int ltr390_register_read(struct ltr390_data *data, u8 register_address)
 {
 	struct device *dev = &data->client->dev;
@@ -135,6 +148,18 @@ static int ltr390_counts_per_uvi(struct ltr390_data *data)
 	return DIV_ROUND_CLOSEST(23 * data->gain * data->int_time_us, 10 * orig_gain * orig_int_time);

drivers/iio/light/ltr390.c static int ltr390_counts_per_uvi(struct ltr390_data *data) · line 158

Quoted 10 lines
drivers/iio/light/ltr390.c +8 -0
 }
 
+static int ltr390_get_samp_freq(struct ltr390_data *data)
+{
+	int ret, value;
+
+	ret = regmap_read(data->regmap, LTR390_ALS_UVS_MEAS_RATE, &value);
+	if (ret < 0)
+		return ret;
+	value &= LTR390_ALS_UVS_MEAS_RATE_MASK;

FIELD_GET() preferred because then the reader doesn't have to check if this mask includes the LSB. It slightly helps review and compiler will get rid of the shift by nothing anyway.

Quoted 27 lines
drivers/iio/light/ltr390.c +9 -0
+
+	return ltr390_samp_freq_table[value][0];
+}
+
 static int ltr390_read_raw(struct iio_dev *iio_device,
 			   struct iio_chan_spec const *chan, int *val,
 			   int *val2, long mask)
@@ -191,6 +216,10 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 		*val = data->int_time_us;
 		return IIO_VAL_INT;
 
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = ltr390_get_samp_freq(data);
+		return IIO_VAL_INT;
+
 	default:
 		return -EINVAL;
 	}
@@ -199,6 +228,7 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 /* integration time in us */
 static const int ltr390_int_time_map_us[] = { 400000, 200000, 100000, 50000, 25000, 12500 };
 static const int ltr390_gain_map[] = { 1, 3, 6, 9, 18 };
+static const int ltr390_freq_map[] = { 40000, 20000, 10000, 5000, 2000, 1000, 500, 500 };
 
 static const struct iio_chan_spec ltr390_channels[] = {
 	/* UV sensor */

drivers/iio/light/ltr390.c static const struct iio_chan_spec ltr390_channels[] = { · line 241

Quoted 7 lines
drivers/iio/light/ltr390.c +2 -1
@@ -206,16 +236,18 @@ static const struct iio_chan_spec ltr390_channels[] = {
 		.type = IIO_UVINDEX,
 		.scan_index = 0,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
+						| BIT(IIO_CHAN_INFO_SAMP_FREQ)

Obviously a long line above, but | should generally be on that previous line. Probably best to reformat it as
.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) |
BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),

Note should have always had a trailing comma. Add that whilst here.

Quoted 19 lines
drivers/iio/light/ltr390.c +4 -1
 	},
 	/* ALS sensor */
 	{
 		.type = IIO_LIGHT,
 		.scan_index = 1,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
+						| BIT(IIO_CHAN_INFO_SAMP_FREQ)
 	},
 };
 
@@ -264,6 +296,27 @@ static int ltr390_set_int_time(struct ltr390_data *data, int val)
 	return -EINVAL;
 }
 
+static int ltr390_set_samp_freq(struct ltr390_data *data, int val)
+{

drivers/iio/light/ltr390.c static int ltr390_set_int_time(struct ltr390_data *data, int val) · line 310

Quoted 10 lines
drivers/iio/light/ltr390.c +10 -0
+	int ret, idx;
+
+	for (idx = 0; idx < ARRAY_SIZE(ltr390_samp_freq_table); idx++) {
+		if (ltr390_samp_freq_table[idx][0] != val)
+			continue;
+
+		guard(mutex)(&data->lock);
+		ret = regmap_update_bits(data->regmap,
+					LTR390_ALS_UVS_MEAS_RATE,
+					LTR390_ALS_UVS_MEAS_RATE_MASK, idx);

return regmap_update_bits()

is the same thing as what you have here.

Quoted 9 lines
drivers/iio/light/ltr390.c +9 -0
+		if (ret)
+			return ret;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
author
#3 lore raw

Re: [PATCH v2 1/4] iio: light: ltr390: Added configurable sampling frequency support

Quoted 5 lines

Hi Abhash,

A few minor comments inline and an (optional) request to cleanup the mask definitions in the existing code.

Quoted 1 line
Quoted 7 lines
Quoted 3 lines

#define LTR390_PART_NUMBER_ID 0xb
#define LTR390_ALS_UVS_GAIN_MASK 0x07
+#define LTR390_ALS_UVS_MEAS_RATE_MASK 0x07

These masks should be converted to GENMASK(). If you don't mind doing it a precursor patch to do so would be nice to have.

Can I do the mask to GENMASK conversion in an additional cleanup patch at the end? The patch would clean up stuff related to newlines and such.

Meanwhile I would use GENMASK for the new ones

Thanks,
Abhash

maintainer
#4 lore raw

Re: [PATCH v2 1/4] iio: light: ltr390: Added configurable sampling frequency support

Quoted 8 lines · On Sat, 14 Sep 2024 22:57:24 +0530 Abhash jha <[email protected]>…
Quoted 8 lines

Hi Abhash,

A few minor comments inline and an (optional) request to cleanup the mask definitions in the existing code.

Quoted 4 lines

#define LTR390_PART_NUMBER_ID 0xb
#define LTR390_ALS_UVS_GAIN_MASK 0x07
+#define LTR390_ALS_UVS_MEAS_RATE_MASK 0x07

Quoted 6 lines
Quoted 4 lines

These masks should be converted to GENMASK(). If you don't mind doing it a precursor patch to do so would be nice to have.

Can I do the mask to GENMASK conversion in an additional cleanup patch at the end? The patch would clean up stuff related to newlines and such.

Doing it at the end is fine, but remember one patch per type of cleanup. So if you have whitespace stuff and genmask, then two patches.

Quoted 2 lines

Meanwhile I would use GENMASK for the new ones

Perfect. Thanks,

Jonathan

Quoted 3 lines

Thanks,
Abhash

author
#5 lore raw

PATCH v2 2/4 iio: light: ltr390: Suspend and Resume support

In reply to Abhash Jha

Added support for suspend and resume PM ops.
We suspend the sensor by clearing the ALS_UVS_EN bit in the MAIN CONTROL register. And we resume it by setting that bit.

---
 drivers/iio/light/ltr390.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
drivers/iio/light/ltr390.c +19 -0
index 73ef4a5a0..c4ff26d68 100644
@@ -432,6 +432,24 @@ static int ltr390_probe(struct i2c_client *client)
 	return devm_iio_device_register(dev, indio_dev);
 }
 
+static int ltr390_suspend(struct device *dev)
+{
+	struct ltr390_data *data = iio_priv(i2c_get_clientdata(
+						to_i2c_client(dev)));
+
+	return regmap_clear_bits(data->regmap, LTR390_MAIN_CTRL, LTR390_SENSOR_ENABLE);
+}
+
+static int ltr390_resume(struct device *dev)
+{
+	struct ltr390_data *data = iio_priv(i2c_get_clientdata(
+						to_i2c_client(dev)));
+
+	return regmap_set_bits(data->regmap, LTR390_MAIN_CTRL, LTR390_SENSOR_ENABLE);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ltr390_pm_ops, ltr390_suspend, ltr390_resume);
+
 static const struct i2c_device_id ltr390_id[] = {
 	{ "ltr390" },
 	{ /* Sentinel */ }
@@ -448,6 +466,7 @@ static struct i2c_driver ltr390_driver = {
 	.driver = {
 		.name = "ltr390",
 		.of_match_table = ltr390_of_table,
+		.pm	= pm_sleep_ptr(&ltr390_pm_ops),
 	},
 	.probe = ltr390_probe,
 	.id_table = ltr390_id,
Signature · 1 line
2.43.0
maintainer
#6 lore raw

Re: [PATCH v2 2/4] iio: light: ltr390: Suspend and Resume support

Quoted 14 lines · On Tue, 10 Sep 2024 10:20:27 +0530 Abhash Jha <[email protected]>…

Added support for suspend and resume PM ops.
We suspend the sensor by clearing the ALS_UVS_EN bit in the MAIN CONTROL register. And we resume it by setting that bit.

---
 drivers/iio/light/ltr390.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
drivers/iio/light/ltr390.c +0 -0
index 73ef4a5a0..c4ff26d68 100644

drivers/iio/light/ltr390.c static int ltr390_probe(struct i2c_client *client) · line 438

Quoted 7 lines
drivers/iio/light/ltr390.c +4 -0
@@ -432,6 +432,24 @@ static int ltr390_probe(struct i2c_client *client)
 	return devm_iio_device_register(dev, indio_dev);
 }
 
+static int ltr390_suspend(struct device *dev)
+{
+	struct ltr390_data *data = iio_priv(i2c_get_clientdata(
+						to_i2c_client(dev)));

That's somewhat ugly. I'd jsut have another local variable. Can also use the access directly from the dev, not via the i2c_client (it's the same data either way and common practice to get it directly from dev).

	struct iio_dev *indio_dev = dev_get_drvdata(dev);

drivers/iio/light/ltr390.c static int ltr390_probe(struct i2c_client *client) · line 440

Quoted 2 lines
drivers/iio/light/ltr390.c +2 -0
+
+	return regmap_clear_bits(data->regmap, LTR390_MAIN_CTRL, LTR390_SENSOR_ENABLE);

Lines is a little long: wrap after CTRL,

drivers/iio/light/ltr390.c static int ltr390_probe(struct i2c_client *client) · line 446

Quoted 6 lines
drivers/iio/light/ltr390.c +6 -0
+}
+
+static int ltr390_resume(struct device *dev)
+{
+	struct ltr390_data *data = iio_priv(i2c_get_clientdata(
+						to_i2c_client(dev)));

As above.

Quoted 17 lines
drivers/iio/light/ltr390.c +7 -0
+
+	return regmap_set_bits(data->regmap, LTR390_MAIN_CTRL, LTR390_SENSOR_ENABLE);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ltr390_pm_ops, ltr390_suspend, ltr390_resume);
+
 static const struct i2c_device_id ltr390_id[] = {
 	{ "ltr390" },
 	{ /* Sentinel */ }
@@ -448,6 +466,7 @@ static struct i2c_driver ltr390_driver = {
 	.driver = {
 		.name = "ltr390",
 		.of_match_table = ltr390_of_table,
+		.pm	= pm_sleep_ptr(&ltr390_pm_ops),
 	},
 	.probe = ltr390_probe,
 	.id_table = ltr390_id,
author
#7 lore raw

PATCH v2 3/4 iio: light: ltr390: Interrupts and threshold event support

In reply to Abhash Jha

Added support for threshold events for both the ALS and UVI channels. The events are reported when the threshold interrupt is triggered. Both rising and falling threshold types are supported.

---
 drivers/iio/light/ltr390.c | 222 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 220 insertions(+), 2 deletions(-)
drivers/iio/light/ltr390.c +220 -2
index c4ff26d68..8a8a118ca 100644
@@ -24,8 +24,11 @@
 #include <linux/mutex.h>
 #include <linux/regmap.h>
 #include <linux/bitfield.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
 
 #include <linux/iio/iio.h>
+#include <linux/iio/events.h>
 
 #include <asm/unaligned.h>
 
@@ -33,9 +36,12 @@
 #define LTR390_ALS_UVS_MEAS_RATE	0x04
 #define LTR390_ALS_UVS_GAIN		0x05
 #define LTR390_PART_ID			0x06
+#define LTR390_MAIN_STATUS		0x07
 #define LTR390_ALS_DATA			0x0D
 #define LTR390_UVS_DATA			0x10
 #define LTR390_INT_CFG			0x19
+#define LTR390_THRESH_UP		0x21
+#define LTR390_THRESH_LOW		0x24
 
 #define LTR390_PART_NUMBER_ID		0xb
 #define LTR390_ALS_UVS_GAIN_MASK	0x07
@@ -46,6 +52,8 @@
 #define LTR390_SW_RESET	      BIT(4)
 #define LTR390_UVS_MODE	      BIT(3)
 #define LTR390_SENSOR_ENABLE  BIT(1)
+#define LTR390_LS_INT_EN      BIT(2)
+#define LTR390_LS_INT_SEL_UVS BIT(5)
 
 #define LTR390_FRACTIONAL_PRECISION 100
 
@@ -230,6 +238,22 @@ static const int ltr390_int_time_map_us[] = { 400000, 200000, 100000, 50000, 250
 static const int ltr390_gain_map[] = { 1, 3, 6, 9, 18 };
 static const int ltr390_freq_map[] = { 40000, 20000, 10000, 5000, 2000, 1000, 500, 500 };
 
+static const struct iio_event_spec ltr390_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	}
+};
+
 static const struct iio_chan_spec ltr390_channels[] = {
 	/* UV sensor */
 	{
@@ -238,7 +262,9 @@ static const struct iio_chan_spec ltr390_channels[] = {
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
-						| BIT(IIO_CHAN_INFO_SAMP_FREQ)
+						| BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.event_spec = ltr390_event_spec,
+		.num_event_specs = ARRAY_SIZE(ltr390_event_spec),
 	},
 	/* ALS sensor */
 	{
@@ -247,7 +273,9 @@ static const struct iio_chan_spec ltr390_channels[] = {
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | BIT(IIO_CHAN_INFO_SCALE)
-						| BIT(IIO_CHAN_INFO_SAMP_FREQ)
+						| BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.event_spec = ltr390_event_spec,
+		.num_event_specs = ARRAY_SIZE(ltr390_event_spec),
 	},
 };
 
@@ -370,12 +398,186 @@ static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons
 	}
 }
 
+static int ltr390_read_threshold(const struct iio_dev *indio_dev,
+				enum iio_event_direction dir,
+				int *val, int *val2)
+{
+	struct ltr390_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		ret = ltr390_register_read(data, LTR390_THRESH_UP);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+
+	case IIO_EV_DIR_FALLING:
+		ret = ltr390_register_read(data, LTR390_THRESH_LOW);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltr390_write_threshold(struct iio_dev *indio_dev,
+				enum iio_event_direction dir,
+				int val, int val2)
+{
+	struct ltr390_data *data = iio_priv(indio_dev);
+	int ret;
+
+	guard(mutex)(&data->lock);
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		ret = regmap_bulk_write(data->regmap,
+					LTR390_THRESH_UP,
+					&val, 3);
+		return ret;
+	case IIO_EV_DIR_FALLING:
+		ret = regmap_bulk_write(data->regmap,
+					LTR390_THRESH_LOW,
+					&val, 3);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltr390_read_event_value(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info,
+				int *val, int *val2)
+{
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return ltr390_read_threshold(indio_dev, dir, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltr390_write_event_value(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info,
+				int val, int val2)
+{
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		if (val2 != 0)
+			return -EINVAL;
+
+		return ltr390_write_threshold(indio_dev, dir, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltr390_read_event_config(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir)
+{
+	struct ltr390_data *data = iio_priv(indio_dev);
+	int ret, status;
+
+	ret = regmap_read(data->regmap, LTR390_INT_CFG, &status);
+	if (ret < 0)
+		return ret;
+
+	return status & LTR390_LS_INT_EN;
+}
+
+static int ltr390_write_event_config(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				int state)
+{
+	struct ltr390_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (state != 1  && state != 0)
+		return -EINVAL;
+
+	if (state == 0)
+		return regmap_clear_bits(data->regmap, LTR390_INT_CFG, LTR390_LS_INT_EN);
+
+	guard(mutex)(&data->lock);
+	ret = regmap_set_bits(data->regmap, LTR390_INT_CFG, LTR390_LS_INT_EN);
+	if (ret < 0)
+		return ret;
+
+	switch (chan->type) {
+	case IIO_LIGHT:
+		ret = ltr390_set_mode(data, LTR390_SET_ALS_MODE);
+		if (ret < 0)
+			return ret;
+
+		return regmap_clear_bits(data->regmap, LTR390_INT_CFG, LTR390_LS_INT_SEL_UVS);
+
+	case IIO_UVINDEX:
+		ret = ltr390_set_mode(data, LTR390_SET_UVS_MODE);
+		if (ret < 0)
+			return ret;
+
+		return regmap_set_bits(data->regmap, LTR390_INT_CFG, LTR390_LS_INT_SEL_UVS);
+
+	default:
+		return -EINVAL;
+	}
+}
+
 static const struct iio_info ltr390_info = {
 	.read_raw = ltr390_read_raw,
 	.write_raw = ltr390_write_raw,
 	.read_avail = ltr390_read_avail,
+	.read_event_value = ltr390_read_event_value,
+	.read_event_config = ltr390_read_event_config,
+	.write_event_value = ltr390_write_event_value,
+	.write_event_config = ltr390_write_event_config,
 };
 
+static irqreturn_t ltr390_interrupt_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct ltr390_data *data = iio_priv(indio_dev);
+	int ret, status;
+
+	/* Reading the status register to clear the interrupt flag, Datasheet pg: 17*/
+	ret = regmap_read(data->regmap, LTR390_MAIN_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	switch (data->mode) {
+	case LTR390_SET_ALS_MODE:
+		iio_push_event(indio_dev,
+			IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+			IIO_EV_TYPE_THRESH,
+			IIO_EV_DIR_EITHER),
+			iio_get_time_ns(indio_dev));
+		break;
+
+	case LTR390_SET_UVS_MODE:
+		iio_push_event(indio_dev,
+			IIO_UNMOD_EVENT_CODE(IIO_UVINDEX, 0,
+			IIO_EV_TYPE_THRESH,
+			IIO_EV_DIR_EITHER),
+			iio_get_time_ns(indio_dev));
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
 static int ltr390_probe(struct i2c_client *client)
 {
 	struct ltr390_data *data;
@@ -429,6 +631,22 @@ static int ltr390_probe(struct i2c_client *client)
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to enable the sensor\n");
 
+	if (client->irq) {
+		int irq_flags = irq_get_trigger_type(client->irq);
+
+		if (!irq_flags)
+			irq_flags = IRQF_TRIGGER_FALLING;
+
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, ltr390_interrupt_handler,
+						irq_flags | IRQF_ONESHOT,
+						"ltr390_thresh_event", indio_dev);
+		if (ret) {
+			dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
+			return ret;
+		}
+	}
+
 	return devm_iio_device_register(dev, indio_dev);
 }
 
Signature · 1 line
2.43.0
maintainer
#8 lore raw

Re: [PATCH v2 3/4] iio: light: ltr390: Interrupts and threshold event support

Quoted 5 lines · On Tue, 10 Sep 2024 10:20:28 +0530 Abhash Jha <[email protected]>…

Added support for threshold events for both the ALS and UVI channels. The events are reported when the threshold interrupt is triggered. Both rising and falling threshold types are supported.

Hi Abhash,

A few comments inline.

Thanks,

Jonathan

Quoted 12 lines
---
 drivers/iio/light/ltr390.c | 222 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 220 insertions(+), 2 deletions(-)
drivers/iio/light/ltr390.c +0 -0
index c4ff26d68..8a8a118ca 100644
@@ -24,8 +24,11 @@
 
 

drivers/iio/light/ltr390.c static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons · line 402

Quoted 5 lines
drivers/iio/light/ltr390.c +2 -0
@@ -370,12 +398,186 @@ static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons
 	}
 }
 
+static int ltr390_read_threshold(const struct iio_dev *indio_dev,
+				enum iio_event_direction dir,

Alignment doesn't look quite right. Is it off one space? That is, e should be below c. Hard to tell this in a diff so I maybe wrong about it being off.

Quoted 26 lines
drivers/iio/light/ltr390.c +26 -0
+				int *val, int *val2)
+{
+	struct ltr390_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		ret = ltr390_register_read(data, LTR390_THRESH_UP);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+
+	case IIO_EV_DIR_FALLING:
+		ret = ltr390_register_read(data, LTR390_THRESH_LOW);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltr390_write_threshold(struct iio_dev *indio_dev,
+				enum iio_event_direction dir,

drivers/iio/light/ltr390.c static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons · line 438

Quoted 10 lines
drivers/iio/light/ltr390.c +10 -0
+				int val, int val2)
+{
+	struct ltr390_data *data = iio_priv(indio_dev);
+	int ret;
+
+	guard(mutex)(&data->lock);
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		ret = regmap_bulk_write(data->regmap,
+					LTR390_THRESH_UP,

Wrap this bit less to get nearer 80 chars.

Quoted 11 lines
drivers/iio/light/ltr390.c +11 -0
+					&val, 3);
+		return ret;
+	case IIO_EV_DIR_FALLING:
+		ret = regmap_bulk_write(data->regmap,
+					LTR390_THRESH_LOW,
+					&val, 3);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}

...

drivers/iio/light/ltr390.c static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons · line 496

Quoted 13 lines
drivers/iio/light/ltr390.c +13 -0
+static int ltr390_read_event_config(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir)
+{
+	struct ltr390_data *data = iio_priv(indio_dev);
+	int ret, status;
+
+	ret = regmap_read(data->regmap, LTR390_INT_CFG, &status);
+	if (ret < 0)
+		return ret;
+
+	return status & LTR390_LS_INT_EN;

Slight preference for FIELD_GET() here which will make this 0 or 1 rather than 0 or 4 (I think?)

Quoted 10 lines
drivers/iio/light/ltr390.c +8 -0
+}
+
 
 
+static irqreturn_t ltr390_interrupt_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct ltr390_data *data = iio_priv(indio_dev);
+	int ret, status;
+

drivers/iio/light/ltr390.c static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons · line 564

Quoted 10 lines
drivers/iio/light/ltr390.c +10 -0
+	/* Reading the status register to clear the interrupt flag, Datasheet pg: 17*/
+	ret = regmap_read(data->regmap, LTR390_MAIN_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	switch (data->mode) {
+	case LTR390_SET_ALS_MODE:
+		iio_push_event(indio_dev,
+			IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+			IIO_EV_TYPE_THRESH,

Align after (

drivers/iio/light/ltr390.c static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons · line 571

Quoted 7 lines
drivers/iio/light/ltr390.c +7 -0
+			IIO_EV_DIR_EITHER),
+			iio_get_time_ns(indio_dev));
+		break;
+
+	case LTR390_SET_UVS_MODE:
+		iio_push_event(indio_dev,
+			IIO_UNMOD_EVENT_CODE(IIO_UVINDEX, 0,

Same on alignment as this is hard to read.

Quoted 13 lines
drivers/iio/light/ltr390.c +9 -0
+			IIO_EV_TYPE_THRESH,
+			IIO_EV_DIR_EITHER),
+			iio_get_time_ns(indio_dev));
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
 static int ltr390_probe(struct i2c_client *client)
 {
 	struct ltr390_data *data;

drivers/iio/light/ltr390.c static int ltr390_probe(struct i2c_client *client) · line 638

Quoted 8 lines
drivers/iio/light/ltr390.c +5 -0
@@ -429,6 +631,22 @@ static int ltr390_probe(struct i2c_client *client)
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to enable the sensor\n");
 
+	if (client->irq) {
+		int irq_flags = irq_get_trigger_type(client->irq);
+
+		if (!irq_flags)
+			irq_flags = IRQF_TRIGGER_FALLING;

Don't override the firmware description. It should be correct for new drives as probably no legacy out there. The only time we play this sort of game is when we have to carry on supporting a wrong configuration that 'works' because the driver was setting more than it should in the past.

drivers/iio/light/ltr390.c static int ltr390_probe(struct i2c_client *client) · line 642

Quoted 4 lines
drivers/iio/light/ltr390.c +4 -0
+
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, ltr390_interrupt_handler,
+						irq_flags | IRQF_ONESHOT,

Drop irq_flags use here.

Quoted 10 lines
drivers/iio/light/ltr390.c +7 -0
+						"ltr390_thresh_event", indio_dev);
+		if (ret) {
+			dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
+			return ret;
+		}
+	}
+
 	return devm_iio_device_register(dev, indio_dev);
 }
 
author
#9 lore raw

PATCH v2 4/4 iio: light: ltr390: Add interrupt persistance support

In reply to Abhash Jha

Added support to configure the threshold interrupt persistance value by providing IIO_EV_INFO_PERIOD attribute. The value written to the attribute should be in miliseconds and should be greater than the sampling rate of the sensor.

---
 drivers/iio/light/ltr390.c | 66 +++++++++++++++++++++++++++++++++++---
 1 file changed, 62 insertions(+), 4 deletions(-)
drivers/iio/light/ltr390.c +62 -4
index 8a8a118ca..9706105c6 100644
@@ -40,6 +40,7 @@
 #define LTR390_ALS_DATA			0x0D
 #define LTR390_UVS_DATA			0x10
 #define LTR390_INT_CFG			0x19
+#define LTR390_INT_PST			0x1A
 #define LTR390_THRESH_UP		0x21
 #define LTR390_THRESH_LOW		0x24
 
@@ -48,6 +49,8 @@
 #define LTR390_ALS_UVS_MEAS_RATE_MASK	0x07
 #define LTR390_ALS_UVS_INT_TIME_MASK	0x70
 #define LTR390_ALS_UVS_INT_TIME(x)	FIELD_PREP(LTR390_ALS_UVS_INT_TIME_MASK, (x))
+#define LTR390_INT_PST_MASK		0xF0
+#define LTR390_INT_PST_VAL(x)		FIELD_PREP(LTR390_INT_PST_MASK, (x))
 
 #define LTR390_SW_RESET	      BIT(4)
 #define LTR390_UVS_MODE	      BIT(3)
@@ -79,6 +82,11 @@ enum ltr390_mode {
 	LTR390_SET_UVS_MODE,
 };
 
+enum ltr390_meas_rate {
+	LTR390_GET_FREQ,
+	LTR390_GET_PERIOD,
+};
+
 struct ltr390_data {
 	struct regmap *regmap;
 	struct i2c_client *client;
@@ -156,7 +164,7 @@ static int ltr390_counts_per_uvi(struct ltr390_data *data)
 	return DIV_ROUND_CLOSEST(23 * data->gain * data->int_time_us, 10 * orig_gain * orig_int_time);
 }
 
-static int ltr390_get_samp_freq(struct ltr390_data *data)
+static int ltr390_get_samp_freq_or_period(struct ltr390_data *data, enum ltr390_meas_rate option)
 {
 	int ret, value;
 
@@ -165,7 +173,7 @@ static int ltr390_get_samp_freq(struct ltr390_data *data)
 		return ret;
 	value &= LTR390_ALS_UVS_MEAS_RATE_MASK;
 
-	return ltr390_samp_freq_table[value][0];
+	return ltr390_samp_freq_table[value][option];
 }
 
 static int ltr390_read_raw(struct iio_dev *iio_device,
@@ -225,7 +233,7 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		*val = ltr390_get_samp_freq(data);
+		*val = ltr390_get_samp_freq_or_period(data, LTR390_GET_FREQ);
 		return IIO_VAL_INT;
 
 	default:
@@ -250,7 +258,8 @@ static const struct iio_event_spec ltr390_event_spec[] = {
 	}, {
 		.type = IIO_EV_TYPE_THRESH,
 		.dir = IIO_EV_DIR_EITHER,
-		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+				BIT(IIO_EV_INFO_PERIOD),
 	}
 };
 
@@ -398,6 +407,44 @@ static int ltr390_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons
 	}
 }
 
+static int ltr390_read_intr_prst(struct ltr390_data *data, int *val)
+{
+	int ret, prst, samp_period;
+
+	samp_period = ltr390_get_samp_freq_or_period(data, LTR390_GET_PERIOD);
+	ret = regmap_read(data->regmap, LTR390_INT_PST, &prst);
+	if (ret < 0)
+		return ret;
+	*val = prst * samp_period;
+
+	return IIO_VAL_INT;
+}
+
+static int ltr390_write_intr_prst(struct ltr390_data *data, int val)
+{
+	int ret, samp_period, new_val;
+
+	samp_period = ltr390_get_samp_freq_or_period(data, LTR390_GET_PERIOD);
+
+	/* persist period should be greater than or equal to samp period */
+	if (val < samp_period)
+		return -EINVAL;
+
+	new_val = DIV_ROUND_UP(val, samp_period);
+	if (new_val < 0 || new_val > 0x0f)
+		return -EINVAL;
+
+	guard(mutex)(&data->lock);
+	ret = regmap_update_bits(data->regmap,
+				LTR390_INT_PST,
+				LTR390_INT_PST_MASK,
+				LTR390_INT_PST_VAL(new_val));
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static int ltr390_read_threshold(const struct iio_dev *indio_dev,
 				enum iio_event_direction dir,
 				int *val, int *val2)
@@ -458,6 +505,10 @@ static int ltr390_read_event_value(struct iio_dev *indio_dev,
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
 		return ltr390_read_threshold(indio_dev, dir, val, val2);
+
+	case IIO_EV_INFO_PERIOD:
+		return ltr390_read_intr_prst(iio_priv(indio_dev), val);
+
 	default:
 		return -EINVAL;
 	}
@@ -476,6 +527,13 @@ static int ltr390_write_event_value(struct iio_dev *indio_dev,
 			return -EINVAL;
 
 		return ltr390_write_threshold(indio_dev, dir, val, val2);
+
+	case IIO_EV_INFO_PERIOD:
+		if (val2 != 0)
+			return -EINVAL;
+
+		return ltr390_write_intr_prst(iio_priv(indio_dev), val);
+
 	default:
 		return -EINVAL;
 	}
Signature · 1 line
2.43.0
maintainer
#10 lore raw

Re: [PATCH v2 4/4] iio: light: ltr390: Add interrupt persistance support

Quoted 15 lines · On Tue, 10 Sep 2024 10:20:29 +0530 Abhash Jha <[email protected]>…

Added support to configure the threshold interrupt persistance value by providing IIO_EV_INFO_PERIOD attribute. The value written to the attribute should be in miliseconds and should be greater than the sampling rate of the sensor.

---
 drivers/iio/light/ltr390.c | 66 +++++++++++++++++++++++++++++++++++---
 1 file changed, 62 insertions(+), 4 deletions(-)
drivers/iio/light/ltr390.c +0 -0
index 8a8a118ca..9706105c6 100644

drivers/iio/light/ltr390.c line 42

Quoted 4 lines
drivers/iio/light/ltr390.c +1 -1
@@ -40,6 +40,7 @@
 
 
-static int ltr390_get_samp_freq(struct ltr390_data *data)
+static int ltr390_get_samp_freq_or_period(struct ltr390_data *data, enum ltr390_meas_rate option)

Wrap this as the line is getting too long.

Otherwise LGTM

Thanks,

Jonathan