uvcvideo: require spec compliance to avoid bugs
Subsystems (2)
v2 cover uvcvideo: require spec compliance to avoid bugs
Some syzkaller reproducers have triggered cases where the devices would not comply with the UVC specification and warnings would result.
These cases can be simply fixed by preventing the allocation of entities with duplicate IDs or zero IDs.
v2:
Squash the two commits into one.
Version 1.1 of the spec already mentioned the restrictions on section 3.7.2. Renamed uvc_alloc_entity to uvc_alloc_new_entity.
Print error message.
Return PTR_ERR values.
Fix checkpatch warnings.
I used section 3.7.2 excerpt from the spec as it is not specific to Output units/terminals and it also mentions that zero IDs are undefined.
Thadeu Lima de Souza Cascardo (1):
media: uvcvideo: require entities to have a unique ID
drivers/media/usb/uvc/uvc_driver.c | 70 ++++++++++++++++++------------ 1 file changed, 43 insertions(+), 27 deletions(-)
Signature · 1 line
2.34.1
PATCH v2 1/1 media: uvcvideo: require entities to have a non-zero unique ID
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero unique ID.
``` Each Unit and Terminal within the video function is assigned a unique identification number, the Unit ID (UID) or Terminal ID (TID), contained in the bUnitID or bTerminalID field of the descriptor. The value 0x00 is reserved for undefined ID, ```
So, deny allocating an entity with ID 0 or an ID that belongs to a unit that is already added to the list of entities.
This also prevents some syzkaller reproducers from triggering warnings due to a chain of entities referring to themselves. In one particular case, an Output Unit is connected to an Input Unit, both with the same ID of 1. But when looking up for the source ID of the Output Unit, that same entity is found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 20.830206] usb 1-1: Using ep0 maxpacket: 8 [ 20.833501] usb 1-1: config 0 descriptor?? [ 21.038518] usb 1-1: string descriptor 0 read error: -71 [ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201) [ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized! [ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized! [ 21.042218] ------------[ cut here ]------------ [ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0 [ 21.043195] Modules linked in: [ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444 [ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 21.044639] Workqueue: usb_hub_wq hub_event [ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0 [ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00 [ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246 [ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1 [ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290 [ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000 [ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003 [ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000 [ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0 [ 21.051136] PKRU: 55555554 [ 21.051331] Call Trace: [ 21.051480] <TASK> [ 21.051611] ? __warn+0xc4/0x210 [ 21.051861] ? media_create_pad_link+0x2c4/0x2e0 [ 21.052252] ? report_bug+0x11b/0x1a0 [ 21.052540] ? trace_hardirqs_on+0x31/0x40 [ 21.052901] ? handle_bug+0x3d/0x70 [ 21.053197] ? exc_invalid_op+0x1a/0x50 [ 21.053511] ? asm_exc_invalid_op+0x1a/0x20 [ 21.053924] ? media_create_pad_link+0x91/0x2e0 [ 21.054364] ? media_create_pad_link+0x2c4/0x2e0 [ 21.054834] ? media_create_pad_link+0x91/0x2e0 [ 21.055131] ? _raw_spin_unlock+0x1e/0x40 [ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210 [ 21.055837] uvc_mc_register_entities+0x358/0x400 [ 21.056144] uvc_register_chains+0x1fd/0x290 [ 21.056413] uvc_probe+0x380e/0x3dc0 [ 21.056676] ? __lock_acquire+0x5aa/0x26e0 [ 21.056946] ? find_held_lock+0x33/0xa0 [ 21.057196] ? kernfs_activate+0x70/0x80 [ 21.057533] ? usb_match_dynamic_id+0x1b/0x70 [ 21.057811] ? find_held_lock+0x33/0xa0 [ 21.058047] ? usb_match_dynamic_id+0x55/0x70 [ 21.058330] ? lock_release+0x124/0x260 [ 21.058657] ? usb_match_one_id_intf+0xa2/0x100 [ 21.058997] usb_probe_interface+0x1ba/0x330 [ 21.059399] really_probe+0x1ba/0x4c0 [ 21.059662] __driver_probe_device+0xb2/0x180 [ 21.059944] driver_probe_device+0x5a/0x100 [ 21.060170] __device_attach_driver+0xe9/0x160 [ 21.060427] ? __pfx___device_attach_driver+0x10/0x10 [ 21.060872] bus_for_each_drv+0xa9/0x100 [ 21.061312] __device_attach+0xed/0x190 [ 21.061812] device_initial_probe+0xe/0x20 [ 21.062229] bus_probe_device+0x4d/0xd0 [ 21.062590] device_add+0x308/0x590 [ 21.062912] usb_set_configuration+0x7b6/0xaf0 [ 21.063403] usb_generic_driver_probe+0x36/0x80 [ 21.063714] usb_probe_device+0x7b/0x130 [ 21.063936] really_probe+0x1ba/0x4c0 [ 21.064111] __driver_probe_device+0xb2/0x180 [ 21.064577] driver_probe_device+0x5a/0x100 [ 21.065019] __device_attach_driver+0xe9/0x160 [ 21.065403] ? __pfx___device_attach_driver+0x10/0x10 [ 21.065820] bus_for_each_drv+0xa9/0x100 [ 21.066094] __device_attach+0xed/0x190 [ 21.066535] device_initial_probe+0xe/0x20 [ 21.066992] bus_probe_device+0x4d/0xd0 [ 21.067250] device_add+0x308/0x590 [ 21.067501] usb_new_device+0x347/0x610 [ 21.067817] hub_event+0x156b/0x1e30 [ 21.068060] ? process_scheduled_works+0x48b/0xaf0 [ 21.068337] process_scheduled_works+0x5a3/0xaf0 [ 21.068668] worker_thread+0x3cf/0x560 [ 21.068932] ? kthread+0x109/0x1b0 [ 21.069133] kthread+0x197/0x1b0 [ 21.069343] ? __pfx_worker_thread+0x10/0x10 [ 21.069598] ? __pfx_kthread+0x10/0x10 [ 21.069908] ret_from_fork+0x32/0x40 [ 21.070169] ? __pfx_kthread+0x10/0x10 [ 21.070424] ret_from_fork_asm+0x1a/0x30 [ 21.070737] </TASK>
--- drivers/media/usb/uvc/uvc_driver.c | 70 ++++++++++++++++++------------ 1 file changed, 43 insertions(+), 27 deletions(-)
drivers/media/usb/uvc/uvc_driver.c +43 -27
@@ -775,14 +775,27 @@ static const u8 uvc_media_transport_input_guid[16] =UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT ;static const u8 uvc_processing_guid[16 ] =UVC_GUID_UVC_PROCESSING ; -static struct uvc_entity *uvc_alloc_entity (u16 type,u16 id, -unsigned int num_pads,unsigned int extra_size) +static struct uvc_entity *uvc_alloc_new_entity (struct uvc_device *dev,u16 type, +u16 id,unsigned int num_pads, +unsigned int extra_size) {struct uvc_entity *entity;unsigned int num_inputs;unsigned int size;unsigned int i; +/* Per UVC 1.1+ spec 3.7.2, the ID is unique */ +if (uvc_entity_by_id (dev, id)) { +dev_err (&dev->udev->dev,"Found multiple Units with the same ID.\n" ); +return ERR_PTR (-EINVAL ); + } + +/* Per UVC 1.1+ spec 3.7.2, the ID should be non-zero */ +if (id ==0 ) { +dev_err (&dev->udev->dev,"Found Unit with invalid ID 0.\n" ); +return ERR_PTR (-EINVAL ); + } + extra_size =roundup (extra_size,sizeof (*entity->pads));if (num_pads) num_inputs = type &UVC_TERM_OUTPUT ? num_pads : num_pads -1 ;
@@ -792,7 +805,7 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id, + num_inputs; entity =kzalloc (size,GFP_KERNEL );if (entity ==NULL ) -return NULL ; +return ERR_PTR (-ENOMEM ); entity->id = id; entity->type = type;
@@ -904,10 +917,10 @@ static int uvc_parse_vendor_control(struct uvc_device *dev,break ; } - unit =uvc_alloc_entity (UVC_VC_EXTENSION_UNIT , buffer[3 ], - p +1 ,2 *n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev,UVC_VC_EXTENSION_UNIT , + buffer[3 ], p +1 ,2 *n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->guid, &buffer[4 ],16 ); unit->extension.bNumControls = buffer[20 ];
@@ -1016,10 +1029,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - term =uvc_alloc_entity (type |UVC_TERM_INPUT , buffer[3 ], -1 , n + p); -if (term ==NULL ) -return -ENOMEM ; + term =uvc_alloc_new_entity (dev, type |UVC_TERM_INPUT , + buffer[3 ],1 , n + p); +if (IS_ERR (term)) +return PTR_ERR (term);if (UVC_ENTITY_TYPE (term) ==UVC_ITT_CAMERA ) { term->camera.bControlSize = n;
@@ -1075,10 +1088,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return 0 ; } - term =uvc_alloc_entity (type |UVC_TERM_OUTPUT , buffer[3 ], -1 ,0 ); -if (term ==NULL ) -return -ENOMEM ; + term =uvc_alloc_new_entity (dev, type |UVC_TERM_OUTPUT , + buffer[3 ],1 ,0 ); +if (IS_ERR (term)) +return PTR_ERR (term);memcpy (term->baSourceID, &buffer[7 ],1 );
@@ -1097,9 +1110,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ], p +1 ,0 ); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ], + p +1 ,0 ); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->baSourceID, &buffer[5 ], p);
@@ -1119,9 +1133,9 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ],2 , n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ],2 , n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->baSourceID, &buffer[4 ],1 ); unit->processing.wMaxMultiplier =
@@ -1148,9 +1162,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ], p +1 , n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ], + p +1 , n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->guid, &buffer[4 ],16 ); unit->extension.bNumControls = buffer[20 ];
@@ -1290,9 +1305,10 @@ static int uvc_gpio_parse(struct uvc_device *dev)return dev_err_probe (&dev->udev->dev, irq,"No IRQ for privacy GPIO\n" ); - unit =uvc_alloc_entity (UVC_EXT_GPIO_UNIT ,UVC_EXT_GPIO_UNIT_ID ,0 ,1 ); -if (!unit) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev,UVC_EXT_GPIO_UNIT , +UVC_EXT_GPIO_UNIT_ID ,0 ,1 ); +if (IS_ERR (unit)) +return PTR_ERR (unit); unit->gpio.gpio_privacy = gpio_privacy; unit->gpio.irq = irq;
Signature · 1 line
2.34.1
Re: [PATCH v2 1/1] media: uvcvideo: require entities to have a non-zero unique ID
Hi Thadeu
Take a look at checkpatch
https://gitlab.freedesktop.org/linux-media/users/patchwork/-/jobs/63550656
, and the nit.
After that feel free to add my
Quoted 132 lines · Thadeu Lima de Souza Cascardo
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero unique ID.
``` Each Unit and Terminal within the video function is assigned a unique identification number, the Unit ID (UID) or Terminal ID (TID), contained in the bUnitID or bTerminalID field of the descriptor. The value 0x00 is reserved for undefined ID, ```So, deny allocating an entity with ID 0 or an ID that belongs to a unit that is already added to the list of entities.
This also prevents some syzkaller reproducers from triggering warnings due to a chain of entities referring to themselves. In one particular case, an Output Unit is connected to an Input Unit, both with the same ID of 1. But when looking up for the source ID of the Output Unit, that same entity is found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 20.830206] usb 1-1: Using ep0 maxpacket: 8 [ 20.833501] usb 1-1: config 0 descriptor?? [ 21.038518] usb 1-1: string descriptor 0 read error: -71 [ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201) [ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized! [ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized! [ 21.042218] ------------[ cut here ]------------ [ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0 [ 21.043195] Modules linked in: [ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444 [ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 21.044639] Workqueue: usb_hub_wq hub_event [ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0 [ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00 [ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246 [ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1 [ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290 [ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000 [ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003 [ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000 [ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0 [ 21.051136] PKRU: 55555554 [ 21.051331] Call Trace: [ 21.051480] <TASK> [ 21.051611] ? __warn+0xc4/0x210 [ 21.051861] ? media_create_pad_link+0x2c4/0x2e0 [ 21.052252] ? report_bug+0x11b/0x1a0 [ 21.052540] ? trace_hardirqs_on+0x31/0x40 [ 21.052901] ? handle_bug+0x3d/0x70 [ 21.053197] ? exc_invalid_op+0x1a/0x50 [ 21.053511] ? asm_exc_invalid_op+0x1a/0x20 [ 21.053924] ? media_create_pad_link+0x91/0x2e0 [ 21.054364] ? media_create_pad_link+0x2c4/0x2e0 [ 21.054834] ? media_create_pad_link+0x91/0x2e0 [ 21.055131] ? _raw_spin_unlock+0x1e/0x40 [ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210 [ 21.055837] uvc_mc_register_entities+0x358/0x400 [ 21.056144] uvc_register_chains+0x1fd/0x290 [ 21.056413] uvc_probe+0x380e/0x3dc0 [ 21.056676] ? __lock_acquire+0x5aa/0x26e0 [ 21.056946] ? find_held_lock+0x33/0xa0 [ 21.057196] ? kernfs_activate+0x70/0x80 [ 21.057533] ? usb_match_dynamic_id+0x1b/0x70 [ 21.057811] ? find_held_lock+0x33/0xa0 [ 21.058047] ? usb_match_dynamic_id+0x55/0x70 [ 21.058330] ? lock_release+0x124/0x260 [ 21.058657] ? usb_match_one_id_intf+0xa2/0x100 [ 21.058997] usb_probe_interface+0x1ba/0x330 [ 21.059399] really_probe+0x1ba/0x4c0 [ 21.059662] __driver_probe_device+0xb2/0x180 [ 21.059944] driver_probe_device+0x5a/0x100 [ 21.060170] __device_attach_driver+0xe9/0x160 [ 21.060427] ? __pfx___device_attach_driver+0x10/0x10 [ 21.060872] bus_for_each_drv+0xa9/0x100 [ 21.061312] __device_attach+0xed/0x190 [ 21.061812] device_initial_probe+0xe/0x20 [ 21.062229] bus_probe_device+0x4d/0xd0 [ 21.062590] device_add+0x308/0x590 [ 21.062912] usb_set_configuration+0x7b6/0xaf0 [ 21.063403] usb_generic_driver_probe+0x36/0x80 [ 21.063714] usb_probe_device+0x7b/0x130 [ 21.063936] really_probe+0x1ba/0x4c0 [ 21.064111] __driver_probe_device+0xb2/0x180 [ 21.064577] driver_probe_device+0x5a/0x100 [ 21.065019] __device_attach_driver+0xe9/0x160 [ 21.065403] ? __pfx___device_attach_driver+0x10/0x10 [ 21.065820] bus_for_each_drv+0xa9/0x100 [ 21.066094] __device_attach+0xed/0x190 [ 21.066535] device_initial_probe+0xe/0x20 [ 21.066992] bus_probe_device+0x4d/0xd0 [ 21.067250] device_add+0x308/0x590 [ 21.067501] usb_new_device+0x347/0x610 [ 21.067817] hub_event+0x156b/0x1e30 [ 21.068060] ? process_scheduled_works+0x48b/0xaf0 [ 21.068337] process_scheduled_works+0x5a3/0xaf0 [ 21.068668] worker_thread+0x3cf/0x560 [ 21.068932] ? kthread+0x109/0x1b0 [ 21.069133] kthread+0x197/0x1b0 [ 21.069343] ? __pfx_worker_thread+0x10/0x10 [ 21.069598] ? __pfx_kthread+0x10/0x10 [ 21.069908] ret_from_fork+0x32/0x40 [ 21.070169] ? __pfx_kthread+0x10/0x10 [ 21.070424] ret_from_fork_asm+0x1a/0x30 [ 21.070737] </TASK>Reported-by [email protected]Reported-by [email protected]Fixes a3fbc2e6bb05 ("media: mc-entity.c: use WARN_ON, validate link pads")Signed-off-by Thadeu Lima de Souza Cascardo <[email protected]>--- drivers/media/usb/uvc/uvc_driver.c | 70 ++++++++++++++++++------------ 1 file changed, 43 insertions(+), 27 deletions(-)drivers/media/usb/uvc/uvc_driver.c +0
-1@@ -775,14 +775,27 @@ static const u8 uvc_media_transport_input_guid[16] =UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT ;static const u8 uvc_processing_guid[16 ] =UVC_GUID_UVC_PROCESSING ; -static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id,
drivers/media/usb/uvc/uvc_driver.c static const u8 uvc_media_transport_input_guid[16] = · line 786
Quoted 10 lines
drivers/media/usb/uvc/uvc_driver.c +3
-1- unsigned int num_pads, unsigned int extra_size) +static struct uvc_entity *uvc_alloc_new_entity (struct uvc_device *dev,u16 type, +u16 id,unsigned int num_pads, +unsigned int extra_size) {struct uvc_entity *entity;unsigned int num_inputs;unsigned int size;unsigned int i;
nit: I'd swap the order of the checks, !id is a much simpler check than uvc_entity_by_id().
Quoted 127 lines
drivers/media/usb/uvc/uvc_driver.c +40
-26+/* Per UVC 1.1+ spec 3.7.2, the ID is unique */ +if (uvc_entity_by_id (dev, id)) { +dev_err (&dev->udev->dev,"Found multiple Units with the same ID.\n" ); +return ERR_PTR (-EINVAL ); + } + +/* Per UVC 1.1+ spec 3.7.2, the ID should be non-zero */ +if (id ==0 ) { +dev_err (&dev->udev->dev,"Found Unit with invalid ID 0.\n" ); +return ERR_PTR (-EINVAL ); + } + extra_size =roundup (extra_size,sizeof (*entity->pads));if (num_pads) num_inputs = type &UVC_TERM_OUTPUT ? num_pads : num_pads -1 ;@@ -792,7 +805,7 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id, + num_inputs; entity =kzalloc (size,GFP_KERNEL );if (entity ==NULL ) -return NULL ; +return ERR_PTR (-ENOMEM ); entity->id = id; entity->type = type;@@ -904,10 +917,10 @@ static int uvc_parse_vendor_control(struct uvc_device *dev,break ; } - unit =uvc_alloc_entity (UVC_VC_EXTENSION_UNIT , buffer[3 ], - p +1 ,2 *n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev,UVC_VC_EXTENSION_UNIT , + buffer[3 ], p +1 ,2 *n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->guid, &buffer[4 ],16 ); unit->extension.bNumControls = buffer[20 ];@@ -1016,10 +1029,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - term =uvc_alloc_entity (type |UVC_TERM_INPUT , buffer[3 ], -1 , n + p); -if (term ==NULL ) -return -ENOMEM ; + term =uvc_alloc_new_entity (dev, type |UVC_TERM_INPUT , + buffer[3 ],1 , n + p); +if (IS_ERR (term)) +return PTR_ERR (term);if (UVC_ENTITY_TYPE (term) ==UVC_ITT_CAMERA ) { term->camera.bControlSize = n;@@ -1075,10 +1088,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return 0 ; } - term =uvc_alloc_entity (type |UVC_TERM_OUTPUT , buffer[3 ], -1 ,0 ); -if (term ==NULL ) -return -ENOMEM ; + term =uvc_alloc_new_entity (dev, type |UVC_TERM_OUTPUT , + buffer[3 ],1 ,0 ); +if (IS_ERR (term)) +return PTR_ERR (term);memcpy (term->baSourceID, &buffer[7 ],1 );@@ -1097,9 +1110,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ], p +1 ,0 ); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ], + p +1 ,0 ); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->baSourceID, &buffer[5 ], p);@@ -1119,9 +1133,9 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ],2 , n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ],2 , n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->baSourceID, &buffer[4 ],1 ); unit->processing.wMaxMultiplier =@@ -1148,9 +1162,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ], p +1 , n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ], + p +1 , n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->guid, &buffer[4 ],16 ); unit->extension.bNumControls = buffer[20 ];@@ -1290,9 +1305,10 @@ static int uvc_gpio_parse(struct uvc_device *dev)return dev_err_probe (&dev->udev->dev, irq,"No IRQ for privacy GPIO\n" ); - unit =uvc_alloc_entity (UVC_EXT_GPIO_UNIT ,UVC_EXT_GPIO_UNIT_ID ,0 ,1 ); -if (!unit) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev,UVC_EXT_GPIO_UNIT , +UVC_EXT_GPIO_UNIT_ID ,0 ,1 ); +if (IS_ERR (unit)) +return PTR_ERR (unit); unit->gpio.gpio_privacy = gpio_privacy; unit->gpio.irq = irq; --2.34.1
Signature · 1 line
Ricardo Ribalda
Re: [PATCH v2 1/1] media: uvcvideo: require entities to have a non-zero unique ID
Quoted 10 lines · Ricardo Ribalda
Hi Thadeu
Take a look at checkpatch
https://gitlab.freedesktop.org/linux-media/users/patchwork/-/jobs/63550656
, and the nit.After that feel free to add my
Reviewed-by Ricardo Ribalda <[email protected]>
Hi, Ricardo.
Thanks a lot for the review. As for the order you pointed below, I totally agree. My fist version even had it intentionally like that. Sorry that I missed it here.
As for the checkpatch nit, I wonder why it didn't catch this locally. Perhaps the CI is using a different version or using some parameters I am not familiar with?
But as for the check itself:
CHECK: spaces preferred around that '*' (ctx:VxV) #182: FILE: drivers/media/usb/uvc/uvc_driver.c:921:
+ buffer[3], p + 1, 2*n);
^
There are other uses of 2*n without any spaces around that line. I am happy to change that single instance in my patch, but I wonder if I should keep it as is to keep consistency, or perhaps send a separate patch fixing all the style issues related to that.
Thoughs? Preferences?
Thanks.
Cascardo.
Quoted 279 lines
Quoted 132 lines · Thadeu Lima de Souza Cascardo
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero unique ID.
``` Each Unit and Terminal within the video function is assigned a unique identification number, the Unit ID (UID) or Terminal ID (TID), contained in the bUnitID or bTerminalID field of the descriptor. The value 0x00 is reserved for undefined ID, ```So, deny allocating an entity with ID 0 or an ID that belongs to a unit that is already added to the list of entities.
This also prevents some syzkaller reproducers from triggering warnings due to a chain of entities referring to themselves. In one particular case, an Output Unit is connected to an Input Unit, both with the same ID of 1. But when looking up for the source ID of the Output Unit, that same entity is found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 20.830206] usb 1-1: Using ep0 maxpacket: 8 [ 20.833501] usb 1-1: config 0 descriptor?? [ 21.038518] usb 1-1: string descriptor 0 read error: -71 [ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201) [ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized! [ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized! [ 21.042218] ------------[ cut here ]------------ [ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0 [ 21.043195] Modules linked in: [ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444 [ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 21.044639] Workqueue: usb_hub_wq hub_event [ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0 [ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00 [ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246 [ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1 [ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290 [ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000 [ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003 [ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000 [ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0 [ 21.051136] PKRU: 55555554 [ 21.051331] Call Trace: [ 21.051480] <TASK> [ 21.051611] ? __warn+0xc4/0x210 [ 21.051861] ? media_create_pad_link+0x2c4/0x2e0 [ 21.052252] ? report_bug+0x11b/0x1a0 [ 21.052540] ? trace_hardirqs_on+0x31/0x40 [ 21.052901] ? handle_bug+0x3d/0x70 [ 21.053197] ? exc_invalid_op+0x1a/0x50 [ 21.053511] ? asm_exc_invalid_op+0x1a/0x20 [ 21.053924] ? media_create_pad_link+0x91/0x2e0 [ 21.054364] ? media_create_pad_link+0x2c4/0x2e0 [ 21.054834] ? media_create_pad_link+0x91/0x2e0 [ 21.055131] ? _raw_spin_unlock+0x1e/0x40 [ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210 [ 21.055837] uvc_mc_register_entities+0x358/0x400 [ 21.056144] uvc_register_chains+0x1fd/0x290 [ 21.056413] uvc_probe+0x380e/0x3dc0 [ 21.056676] ? __lock_acquire+0x5aa/0x26e0 [ 21.056946] ? find_held_lock+0x33/0xa0 [ 21.057196] ? kernfs_activate+0x70/0x80 [ 21.057533] ? usb_match_dynamic_id+0x1b/0x70 [ 21.057811] ? find_held_lock+0x33/0xa0 [ 21.058047] ? usb_match_dynamic_id+0x55/0x70 [ 21.058330] ? lock_release+0x124/0x260 [ 21.058657] ? usb_match_one_id_intf+0xa2/0x100 [ 21.058997] usb_probe_interface+0x1ba/0x330 [ 21.059399] really_probe+0x1ba/0x4c0 [ 21.059662] __driver_probe_device+0xb2/0x180 [ 21.059944] driver_probe_device+0x5a/0x100 [ 21.060170] __device_attach_driver+0xe9/0x160 [ 21.060427] ? __pfx___device_attach_driver+0x10/0x10 [ 21.060872] bus_for_each_drv+0xa9/0x100 [ 21.061312] __device_attach+0xed/0x190 [ 21.061812] device_initial_probe+0xe/0x20 [ 21.062229] bus_probe_device+0x4d/0xd0 [ 21.062590] device_add+0x308/0x590 [ 21.062912] usb_set_configuration+0x7b6/0xaf0 [ 21.063403] usb_generic_driver_probe+0x36/0x80 [ 21.063714] usb_probe_device+0x7b/0x130 [ 21.063936] really_probe+0x1ba/0x4c0 [ 21.064111] __driver_probe_device+0xb2/0x180 [ 21.064577] driver_probe_device+0x5a/0x100 [ 21.065019] __device_attach_driver+0xe9/0x160 [ 21.065403] ? __pfx___device_attach_driver+0x10/0x10 [ 21.065820] bus_for_each_drv+0xa9/0x100 [ 21.066094] __device_attach+0xed/0x190 [ 21.066535] device_initial_probe+0xe/0x20 [ 21.066992] bus_probe_device+0x4d/0xd0 [ 21.067250] device_add+0x308/0x590 [ 21.067501] usb_new_device+0x347/0x610 [ 21.067817] hub_event+0x156b/0x1e30 [ 21.068060] ? process_scheduled_works+0x48b/0xaf0 [ 21.068337] process_scheduled_works+0x5a3/0xaf0 [ 21.068668] worker_thread+0x3cf/0x560 [ 21.068932] ? kthread+0x109/0x1b0 [ 21.069133] kthread+0x197/0x1b0 [ 21.069343] ? __pfx_worker_thread+0x10/0x10 [ 21.069598] ? __pfx_kthread+0x10/0x10 [ 21.069908] ret_from_fork+0x32/0x40 [ 21.070169] ? __pfx_kthread+0x10/0x10 [ 21.070424] ret_from_fork_asm+0x1a/0x30 [ 21.070737] </TASK>Reported-by [email protected]Reported-by [email protected]Fixes a3fbc2e6bb05 ("media: mc-entity.c: use WARN_ON, validate link pads")Signed-off-by Thadeu Lima de Souza Cascardo <[email protected]>--- drivers/media/usb/uvc/uvc_driver.c | 70 ++++++++++++++++++------------ 1 file changed, 43 insertions(+), 27 deletions(-)drivers/media/usb/uvc/uvc_driver.c +0
-1@@ -775,14 +775,27 @@ static const u8 uvc_media_transport_input_guid[16] =UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT ;static const u8 uvc_processing_guid[16 ] =UVC_GUID_UVC_PROCESSING ; -static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id,drivers/media/usb/uvc/uvc_driver.c static const u8 uvc_media_transport_input_guid[16] = · line 786
Quoted 10 lines
drivers/media/usb/uvc/uvc_driver.c +3
-1- unsigned int num_pads, unsigned int extra_size) +static struct uvc_entity *uvc_alloc_new_entity (struct uvc_device *dev,u16 type, +u16 id,unsigned int num_pads, +unsigned int extra_size) {struct uvc_entity *entity;unsigned int num_inputs;unsigned int size;unsigned int i;nit: I'd swap the order of the checks, !id is a much simpler check than
uvc_entity_by_id().Quoted 127 lines
drivers/media/usb/uvc/uvc_driver.c +40
-26+/* Per UVC 1.1+ spec 3.7.2, the ID is unique */ +if (uvc_entity_by_id (dev, id)) { +dev_err (&dev->udev->dev,"Found multiple Units with the same ID.\n" ); +return ERR_PTR (-EINVAL ); + } + +/* Per UVC 1.1+ spec 3.7.2, the ID should be non-zero */ +if (id ==0 ) { +dev_err (&dev->udev->dev,"Found Unit with invalid ID 0.\n" ); +return ERR_PTR (-EINVAL ); + } + extra_size =roundup (extra_size,sizeof (*entity->pads));if (num_pads) num_inputs = type &UVC_TERM_OUTPUT ? num_pads : num_pads -1 ;@@ -792,7 +805,7 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id, + num_inputs; entity =kzalloc (size,GFP_KERNEL );if (entity ==NULL ) -return NULL ; +return ERR_PTR (-ENOMEM ); entity->id = id; entity->type = type;@@ -904,10 +917,10 @@ static int uvc_parse_vendor_control(struct uvc_device *dev,break ; } - unit =uvc_alloc_entity (UVC_VC_EXTENSION_UNIT , buffer[3 ], - p +1 ,2 *n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev,UVC_VC_EXTENSION_UNIT , + buffer[3 ], p +1 ,2 *n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->guid, &buffer[4 ],16 ); unit->extension.bNumControls = buffer[20 ];@@ -1016,10 +1029,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - term =uvc_alloc_entity (type |UVC_TERM_INPUT , buffer[3 ], -1 , n + p); -if (term ==NULL ) -return -ENOMEM ; + term =uvc_alloc_new_entity (dev, type |UVC_TERM_INPUT , + buffer[3 ],1 , n + p); +if (IS_ERR (term)) +return PTR_ERR (term);if (UVC_ENTITY_TYPE (term) ==UVC_ITT_CAMERA ) { term->camera.bControlSize = n;@@ -1075,10 +1088,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return 0 ; } - term =uvc_alloc_entity (type |UVC_TERM_OUTPUT , buffer[3 ], -1 ,0 ); -if (term ==NULL ) -return -ENOMEM ; + term =uvc_alloc_new_entity (dev, type |UVC_TERM_OUTPUT , + buffer[3 ],1 ,0 ); +if (IS_ERR (term)) +return PTR_ERR (term);memcpy (term->baSourceID, &buffer[7 ],1 );@@ -1097,9 +1110,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ], p +1 ,0 ); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ], + p +1 ,0 ); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->baSourceID, &buffer[5 ], p);@@ -1119,9 +1133,9 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ],2 , n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ],2 , n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->baSourceID, &buffer[4 ],1 ); unit->processing.wMaxMultiplier =@@ -1148,9 +1162,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ], p +1 , n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ], + p +1 , n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->guid, &buffer[4 ],16 ); unit->extension.bNumControls = buffer[20 ];@@ -1290,9 +1305,10 @@ static int uvc_gpio_parse(struct uvc_device *dev)return dev_err_probe (&dev->udev->dev, irq,"No IRQ for privacy GPIO\n" ); - unit =uvc_alloc_entity (UVC_EXT_GPIO_UNIT ,UVC_EXT_GPIO_UNIT_ID ,0 ,1 ); -if (!unit) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev,UVC_EXT_GPIO_UNIT , +UVC_EXT_GPIO_UNIT_ID ,0 ,1 ); +if (IS_ERR (unit)) +return PTR_ERR (unit); unit->gpio.gpio_privacy = gpio_privacy; unit->gpio.irq = irq; --2.34.1
Signature · 1 line
Ricardo Ribalda
Re: [PATCH v2 1/1] media: uvcvideo: require entities to have a non-zero unique ID
Hi Thadeu
Quoted 15 lines · Thadeu Lima de Souza Cascardo
Quoted 10 lines · Ricardo Ribalda
Hi Thadeu
Take a look at checkpatch
https://gitlab.freedesktop.org/linux-media/users/patchwork/-/jobs/63550656
, and the nit.After that feel free to add my
Reviewed-by Ricardo Ribalda <[email protected]>Hi, Ricardo.
Quoted 7 lines
Thanks a lot for the review. As for the order you pointed below, I totally agree. My fist version even had it intentionally like that. Sorry that I missed it here.
As for the checkpatch nit, I wonder why it didn't catch this locally. Perhaps the CI is using a different version or using some parameters I am not familiar with?
You can run the same tests as the CI if you need to:
https://gitlab.freedesktop.org/linux-media/media-ci/-/blob/main/README.md?ref_type=heads
Quoted 6 lines
But as for the check itself:
CHECK: spaces preferred around that '*' (ctx:VxV) #182: FILE:
drivers/media/usb/uvc/uvc_driver.c:921:
Quoted 7 lines
+ buffer[3], p + 1, 2*n); ^There are other uses of 2*n without any spaces around that line. I am happy to change that single instance in my patch, but I wonder if I should keep it as is to keep consistency, or perhaps send a separate patch fixing all the style issues related to that.
I'd rather just change it in the single instance in your patch. But it is up to Laurent ;)
Quoted 285 lines
Thoughs? Preferences?
Thanks.
Cascardo.Quoted 279 lines
Quoted 132 lines · Thadeu Lima de Souza Cascardo
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero unique ID.
``` Each Unit and Terminal within the video function is assigned a unique identification number, the Unit ID (UID) or Terminal ID (TID), contained in the bUnitID or bTerminalID field of the descriptor. The value 0x00 is reserved for undefined ID, ```So, deny allocating an entity with ID 0 or an ID that belongs to a unit that is already added to the list of entities.
This also prevents some syzkaller reproducers from triggering warnings due to a chain of entities referring to themselves. In one particular case, an Output Unit is connected to an Input Unit, both with the same ID of 1. But when looking up for the source ID of the Output Unit, that same entity is found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 20.830206] usb 1-1: Using ep0 maxpacket: 8 [ 20.833501] usb 1-1: config 0 descriptor?? [ 21.038518] usb 1-1: string descriptor 0 read error: -71 [ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201) [ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized! [ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized! [ 21.042218] ------------[ cut here ]------------ [ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0 [ 21.043195] Modules linked in: [ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444 [ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 21.044639] Workqueue: usb_hub_wq hub_event [ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0 [ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00 [ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246 [ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1 [ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290 [ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000 [ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003 [ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000 [ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0 [ 21.051136] PKRU: 55555554 [ 21.051331] Call Trace: [ 21.051480] <TASK> [ 21.051611] ? __warn+0xc4/0x210 [ 21.051861] ? media_create_pad_link+0x2c4/0x2e0 [ 21.052252] ? report_bug+0x11b/0x1a0 [ 21.052540] ? trace_hardirqs_on+0x31/0x40 [ 21.052901] ? handle_bug+0x3d/0x70 [ 21.053197] ? exc_invalid_op+0x1a/0x50 [ 21.053511] ? asm_exc_invalid_op+0x1a/0x20 [ 21.053924] ? media_create_pad_link+0x91/0x2e0 [ 21.054364] ? media_create_pad_link+0x2c4/0x2e0 [ 21.054834] ? media_create_pad_link+0x91/0x2e0 [ 21.055131] ? _raw_spin_unlock+0x1e/0x40 [ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210 [ 21.055837] uvc_mc_register_entities+0x358/0x400 [ 21.056144] uvc_register_chains+0x1fd/0x290 [ 21.056413] uvc_probe+0x380e/0x3dc0 [ 21.056676] ? __lock_acquire+0x5aa/0x26e0 [ 21.056946] ? find_held_lock+0x33/0xa0 [ 21.057196] ? kernfs_activate+0x70/0x80 [ 21.057533] ? usb_match_dynamic_id+0x1b/0x70 [ 21.057811] ? find_held_lock+0x33/0xa0 [ 21.058047] ? usb_match_dynamic_id+0x55/0x70 [ 21.058330] ? lock_release+0x124/0x260 [ 21.058657] ? usb_match_one_id_intf+0xa2/0x100 [ 21.058997] usb_probe_interface+0x1ba/0x330 [ 21.059399] really_probe+0x1ba/0x4c0 [ 21.059662] __driver_probe_device+0xb2/0x180 [ 21.059944] driver_probe_device+0x5a/0x100 [ 21.060170] __device_attach_driver+0xe9/0x160 [ 21.060427] ? __pfx___device_attach_driver+0x10/0x10 [ 21.060872] bus_for_each_drv+0xa9/0x100 [ 21.061312] __device_attach+0xed/0x190 [ 21.061812] device_initial_probe+0xe/0x20 [ 21.062229] bus_probe_device+0x4d/0xd0 [ 21.062590] device_add+0x308/0x590 [ 21.062912] usb_set_configuration+0x7b6/0xaf0 [ 21.063403] usb_generic_driver_probe+0x36/0x80 [ 21.063714] usb_probe_device+0x7b/0x130 [ 21.063936] really_probe+0x1ba/0x4c0 [ 21.064111] __driver_probe_device+0xb2/0x180 [ 21.064577] driver_probe_device+0x5a/0x100 [ 21.065019] __device_attach_driver+0xe9/0x160 [ 21.065403] ? __pfx___device_attach_driver+0x10/0x10 [ 21.065820] bus_for_each_drv+0xa9/0x100 [ 21.066094] __device_attach+0xed/0x190 [ 21.066535] device_initial_probe+0xe/0x20 [ 21.066992] bus_probe_device+0x4d/0xd0 [ 21.067250] device_add+0x308/0x590 [ 21.067501] usb_new_device+0x347/0x610 [ 21.067817] hub_event+0x156b/0x1e30 [ 21.068060] ? process_scheduled_works+0x48b/0xaf0 [ 21.068337] process_scheduled_works+0x5a3/0xaf0 [ 21.068668] worker_thread+0x3cf/0x560 [ 21.068932] ? kthread+0x109/0x1b0 [ 21.069133] kthread+0x197/0x1b0 [ 21.069343] ? __pfx_worker_thread+0x10/0x10 [ 21.069598] ? __pfx_kthread+0x10/0x10 [ 21.069908] ret_from_fork+0x32/0x40 [ 21.070169] ? __pfx_kthread+0x10/0x10 [ 21.070424] ret_from_fork_asm+0x1a/0x30 [ 21.070737] </TASK>Reported-by [email protected]Reported-by [email protected]Fixes a3fbc2e6bb05 ("media: mc-entity.c: use WARN_ON, validate link pads")Signed-off-by Thadeu Lima de Souza Cascardo <[email protected]>--- drivers/media/usb/uvc/uvc_driver.c | 70 ++++++++++++++++++------------ 1 file changed, 43 insertions(+), 27 deletions(-)drivers/media/usb/uvc/uvc_driver.c +0
-1@@ -775,14 +775,27 @@ static const u8 uvc_media_transport_input_guid[16] =UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT ;static const u8 uvc_processing_guid[16 ] =UVC_GUID_UVC_PROCESSING ; -static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id,drivers/media/usb/uvc/uvc_driver.c static const u8 uvc_media_transport_input_guid[16] = · line 786
Quoted 10 lines
drivers/media/usb/uvc/uvc_driver.c +3
-1- unsigned int num_pads, unsigned int extra_size) +static struct uvc_entity *uvc_alloc_new_entity (struct uvc_device *dev,u16 type, +u16 id,unsigned int num_pads, +unsigned int extra_size) {struct uvc_entity *entity;unsigned int num_inputs;unsigned int size;unsigned int i;nit: I'd swap the order of the checks, !id is a much simpler check than
uvc_entity_by_id().Quoted 125 lines
drivers/media/usb/uvc/uvc_driver.c +40
-26+/* Per UVC 1.1+ spec 3.7.2, the ID is unique */ +if (uvc_entity_by_id (dev, id)) { +dev_err (&dev->udev->dev,"Found multiple Units with the same ID.\n" ); +return ERR_PTR (-EINVAL ); + } + +/* Per UVC 1.1+ spec 3.7.2, the ID should be non-zero */ +if (id ==0 ) { +dev_err (&dev->udev->dev,"Found Unit with invalid ID 0.\n" ); +return ERR_PTR (-EINVAL ); + } + extra_size =roundup (extra_size,sizeof (*entity->pads));if (num_pads) num_inputs = type &UVC_TERM_OUTPUT ? num_pads : num_pads -1 ;@@ -792,7 +805,7 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id, + num_inputs; entity =kzalloc (size,GFP_KERNEL );if (entity ==NULL ) -return NULL ; +return ERR_PTR (-ENOMEM ); entity->id = id; entity->type = type;@@ -904,10 +917,10 @@ static int uvc_parse_vendor_control(struct uvc_device *dev,break ; } - unit =uvc_alloc_entity (UVC_VC_EXTENSION_UNIT , buffer[3 ], - p +1 ,2 *n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev,UVC_VC_EXTENSION_UNIT , + buffer[3 ], p +1 ,2 *n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->guid, &buffer[4 ],16 ); unit->extension.bNumControls = buffer[20 ];@@ -1016,10 +1029,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - term =uvc_alloc_entity (type |UVC_TERM_INPUT , buffer[3 ], -1 , n + p); -if (term ==NULL ) -return -ENOMEM ; + term =uvc_alloc_new_entity (dev, type |UVC_TERM_INPUT , + buffer[3 ],1 , n + p); +if (IS_ERR (term)) +return PTR_ERR (term);if (UVC_ENTITY_TYPE (term) ==UVC_ITT_CAMERA ) { term->camera.bControlSize = n;@@ -1075,10 +1088,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return 0 ; } - term =uvc_alloc_entity (type |UVC_TERM_OUTPUT , buffer[3 ], -1 ,0 ); -if (term ==NULL ) -return -ENOMEM ; + term =uvc_alloc_new_entity (dev, type |UVC_TERM_OUTPUT , + buffer[3 ],1 ,0 ); +if (IS_ERR (term)) +return PTR_ERR (term);memcpy (term->baSourceID, &buffer[7 ],1 );@@ -1097,9 +1110,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ], p +1 ,0 ); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ], + p +1 ,0 ); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->baSourceID, &buffer[5 ], p);@@ -1119,9 +1133,9 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ],2 , n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ],2 , n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->baSourceID, &buffer[4 ],1 ); unit->processing.wMaxMultiplier =@@ -1148,9 +1162,10 @@ static int uvc_parse_standard_control(struct uvc_device *dev,return -EINVAL ; } - unit =uvc_alloc_entity (buffer[2 ], buffer[3 ], p +1 , n); -if (unit ==NULL ) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev, buffer[2 ], buffer[3 ], + p +1 , n); +if (IS_ERR (unit)) +return PTR_ERR (unit);memcpy (unit->guid, &buffer[4 ],16 ); unit->extension.bNumControls = buffer[20 ];@@ -1290,9 +1305,10 @@ static int uvc_gpio_parse(struct uvc_device *dev)return dev_err_probe (&dev->udev->dev, irq,"No IRQ for privacy GPIO\n" ); - unit =uvc_alloc_entity (UVC_EXT_GPIO_UNIT ,UVC_EXT_GPIO_UNIT_ID ,0 ,1 ); -if (!unit) -return -ENOMEM ; + unit =uvc_alloc_new_entity (dev,UVC_EXT_GPIO_UNIT , +UVC_EXT_GPIO_UNIT_ID ,0 ,1 ); +if (IS_ERR (unit)) +return PTR_ERR (unit); unit->gpio.gpio_privacy = gpio_privacy; unit->gpio.irq = irq; --Quoted 2 lines
2.34.1
--
Ricardo Ribalda
Signature · 1 line
Ricardo Ribalda