Fix misspelling of "accept*"
Subsystems (6)
PATCH 1/1 Fix misspelling of "accept*"
Several files have "accept*" misspelled as "accpet*" in the comments. Fix all such occurrences.
--- drivers/infiniband/hw/irdma/cm.c | 2 +- drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c | 4 ++-- drivers/net/ethernet/natsemi/ns83820.c | 2 +- include/uapi/linux/udp.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)
drivers/infiniband/hw/irdma/cm.c +1 -1
@@ -3631,7 +3631,7 @@ void irdma_free_lsmm_rsrc(struct irdma_qp *iwqp)/** * irdma_accept - registered call for connection to be accepted * @cm_id: cm information for passive connection -* @conn_param: accpet parameters +* @conn_param: accept parameters */ int irdma_accept (struct iw_cm_id *cm_id,struct iw_cm_conn_param *conn_param) {
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c +2 -2
@@ -342,8 +342,8 @@ static struct sk_buff *copy_gl_to_skb_pkt(const struct pkt_gl *gl, {struct sk_buff *skb; -/* Allocate space for cpl_pass_accpet_req which will be synthesized by -* driver. Once driver synthesizes cpl_pass_accpet_req the skb will go +/* Allocate space for cpl_pass_accept_req which will be synthesized by +* driver. Once driver synthesizes cpl_pass_accept_req the skb will go * through the regular cpl_pass_accept_req processing in TOM. */ skb = alloc_skb(gl->tot_len + sizeof(struct cpl_pass_accept_req)
drivers/net/ethernet/natsemi/ns83820.c +1 -1
@@ -2090,7 +2090,7 @@ static int ns83820_init_one(struct pci_dev *pci_dev,*/ /* Ramit : 1024 DMA is not a good idea, it ends up banging * some DELL and COMPAQ SMP systems -* Turn on ALP, only we are accpeting Jumbo Packets */ +* Turn on ALP, only we are accepting Jumbo Packets */ writel (RXCFG_AEP |RXCFG_ARP |RXCFG_AIRL |RXCFG_RX_FD |RXCFG_STRIPCRC //| RXCFG_ALP
include/uapi/linux/udp.h +1 -1
@@ -31,7 +31,7 @@ struct udphdr {#define UDP_CORK 1/* Never send partially complete segments */ #define UDP_ENCAP 100/* Set the socket to accept encapsulated packets */ #define UDP_NO_CHECK6_TX 101/* Disable sending checksum for UDP6X */ -#define UDP_NO_CHECK6_RX 102/* Disable accpeting checksum for UDP6 */ +#define UDP_NO_CHECK6_RX 102/* Disable accepting checksum for UDP6 */ #define UDP_SEGMENT 103/* Set GSO segmentation size */ #define UDP_GRO 104/* This socket can receive UDP GRO packets */
Signature · 1 line
2.45.2
Quoted 4 lines · * Alexander Zubkov ([email protected]) wrote:
Several files have "accept*" misspelled as "accpet*" in the comments. Fix all such occurrences.
Signed-off-by Alexander Zubkov <[email protected]>
hmm, should probably cc in some maintainers, I guess networking. (added netdev and Paolo)
Dave
Quoted 65 lines
--- drivers/infiniband/hw/irdma/cm.c | 2 +- drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c | 4 ++-- drivers/net/ethernet/natsemi/ns83820.c | 2 +- include/uapi/linux/udp.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)drivers/infiniband/hw/irdma/cm.c +1
-1@@ -3631,7 +3631,7 @@ void irdma_free_lsmm_rsrc(struct irdma_qp *iwqp)/** * irdma_accept - registered call for connection to be accepted * @cm_id: cm information for passive connection -* @conn_param: accpet parameters +* @conn_param: accept parameters */ int irdma_accept (struct iw_cm_id *cm_id,struct iw_cm_conn_param *conn_param) {drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c +2
-2@@ -342,8 +342,8 @@ static struct sk_buff *copy_gl_to_skb_pkt(const struct pkt_gl *gl, {struct sk_buff *skb; -/* Allocate space for cpl_pass_accpet_req which will be synthesized by -* driver. Once driver synthesizes cpl_pass_accpet_req the skb will go +/* Allocate space for cpl_pass_accept_req which will be synthesized by +* driver. Once driver synthesizes cpl_pass_accept_req the skb will go * through the regular cpl_pass_accept_req processing in TOM. */ skb = alloc_skb(gl->tot_len + sizeof(struct cpl_pass_accept_req)drivers/net/ethernet/natsemi/ns83820.c +1
-1@@ -2090,7 +2090,7 @@ static int ns83820_init_one(struct pci_dev *pci_dev,*/ /* Ramit : 1024 DMA is not a good idea, it ends up banging * some DELL and COMPAQ SMP systems -* Turn on ALP, only we are accpeting Jumbo Packets */ +* Turn on ALP, only we are accepting Jumbo Packets */ writel (RXCFG_AEP |RXCFG_ARP |RXCFG_AIRL |RXCFG_RX_FD |RXCFG_STRIPCRC //| RXCFG_ALPinclude/uapi/linux/udp.h +1
-1@@ -31,7 +31,7 @@ struct udphdr {#define UDP_CORK 1/* Never send partially complete segments */ #define UDP_ENCAP 100/* Set the socket to accept encapsulated packets */ #define UDP_NO_CHECK6_TX 101/* Disable sending checksum for UDP6X */ -#define UDP_NO_CHECK6_RX 102/* Disable accpeting checksum for UDP6 */ +#define UDP_NO_CHECK6_RX 102/* Disable accepting checksum for UDP6 */ #define UDP_SEGMENT 103/* Set GSO segmentation size */ #define UDP_GRO 104/* This socket can receive UDP GRO packets */ Signature · 1 line
2.45.2
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
Hi,
I just wanted to kindly check in on the status of my patch. Please let me know if any further action is needed from my side.
Thanks for your time!
Best regards,
Alexander Zubkov
Quoted 84 lines · Dr. David Alan Gilbert
Quoted 4 lines · * Alexander Zubkov ([email protected]) wrote:
Several files have "accept*" misspelled as "accpet*" in the comments. Fix all such occurrences.
Signed-off-by Alexander Zubkov <[email protected]>Reviewed-by Dr. David Alan Gilbert <[email protected]>hmm, should probably cc in some maintainers, I guess networking. (added netdev and Paolo)
Dave
Quoted 62 lines
--- drivers/infiniband/hw/irdma/cm.c | 2 +- drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c | 4 ++-- drivers/net/ethernet/natsemi/ns83820.c | 2 +- include/uapi/linux/udp.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)drivers/infiniband/hw/irdma/cm.c +1
-1@@ -3631,7 +3631,7 @@ void irdma_free_lsmm_rsrc(struct irdma_qp *iwqp)/** * irdma_accept - registered call for connection to be accepted * @cm_id: cm information for passive connection -* @conn_param: accpet parameters +* @conn_param: accept parameters */ int irdma_accept (struct iw_cm_id *cm_id,struct iw_cm_conn_param *conn_param) {drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c +2
-2@@ -342,8 +342,8 @@ static struct sk_buff *copy_gl_to_skb_pkt(const struct pkt_gl *gl, {struct sk_buff *skb; -/* Allocate space for cpl_pass_accpet_req which will be synthesized by -* driver. Once driver synthesizes cpl_pass_accpet_req the skb will go +/* Allocate space for cpl_pass_accept_req which will be synthesized by +* driver. Once driver synthesizes cpl_pass_accept_req the skb will go * through the regular cpl_pass_accept_req processing in TOM. */ skb = alloc_skb(gl->tot_len + sizeof(struct cpl_pass_accept_req)drivers/net/ethernet/natsemi/ns83820.c +1
-1@@ -2090,7 +2090,7 @@ static int ns83820_init_one(struct pci_dev *pci_dev,*/ /* Ramit : 1024 DMA is not a good idea, it ends up banging * some DELL and COMPAQ SMP systems -* Turn on ALP, only we are accpeting Jumbo Packets */ +* Turn on ALP, only we are accepting Jumbo Packets */ writel (RXCFG_AEP |RXCFG_ARP |RXCFG_AIRL |RXCFG_RX_FD |RXCFG_STRIPCRC //| RXCFG_ALPinclude/uapi/linux/udp.h +1
-2@@ -31,7 +31,7 @@ struct udphdr {#define UDP_CORK 1/* Never send partially complete segments */ #define UDP_ENCAP 100/* Set the socket to accept encapsulated packets */ #define UDP_NO_CHECK6_TX 101/* Disable sending checksum for UDP6X */ -#define UDP_NO_CHECK6_RX 102/* Disable accpeting checksum for UDP6 */ +#define UDP_NO_CHECK6_RX 102/* Disable accepting checksum for UDP6 */ #define UDP_SEGMENT 103/* Set GSO segmentation size */ #define UDP_GRO 104/* This socket can receive UDP GRO packets */ --Quoted 3 lines
2.45.2
--
-----Open up your eyes, open up your mind, open up your code -------/ Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
Quoted 6 lines · * Alexander Zubkov ([email protected]) wrote:
Hi,
I just wanted to kindly check in on the status of my patch. Please let me know if any further action is needed from my side.
Thanks for your time!
I was only a reviewer on this; it'll need some of the netdev people to notice it for it to get further.
Dave
Quoted 89 lines
Best regards,
Alexander ZubkovQuoted 84 lines · Dr. David Alan Gilbert
Quoted 4 lines · * Alexander Zubkov ([email protected]) wrote:
Several files have "accept*" misspelled as "accpet*" in the comments. Fix all such occurrences.
Signed-off-by Alexander Zubkov <[email protected]>Reviewed-by Dr. David Alan Gilbert <[email protected]>hmm, should probably cc in some maintainers, I guess networking. (added netdev and Paolo)
Dave
Quoted 62 lines
--- drivers/infiniband/hw/irdma/cm.c | 2 +- drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c | 4 ++-- drivers/net/ethernet/natsemi/ns83820.c | 2 +- include/uapi/linux/udp.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)drivers/infiniband/hw/irdma/cm.c +1
-1@@ -3631,7 +3631,7 @@ void irdma_free_lsmm_rsrc(struct irdma_qp *iwqp)/** * irdma_accept - registered call for connection to be accepted * @cm_id: cm information for passive connection -* @conn_param: accpet parameters +* @conn_param: accept parameters */ int irdma_accept (struct iw_cm_id *cm_id,struct iw_cm_conn_param *conn_param) {drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c +2
-2@@ -342,8 +342,8 @@ static struct sk_buff *copy_gl_to_skb_pkt(const struct pkt_gl *gl, {struct sk_buff *skb; -/* Allocate space for cpl_pass_accpet_req which will be synthesized by -* driver. Once driver synthesizes cpl_pass_accpet_req the skb will go +/* Allocate space for cpl_pass_accept_req which will be synthesized by +* driver. Once driver synthesizes cpl_pass_accept_req the skb will go * through the regular cpl_pass_accept_req processing in TOM. */ skb = alloc_skb(gl->tot_len + sizeof(struct cpl_pass_accept_req)drivers/net/ethernet/natsemi/ns83820.c +1
-1@@ -2090,7 +2090,7 @@ static int ns83820_init_one(struct pci_dev *pci_dev,*/ /* Ramit : 1024 DMA is not a good idea, it ends up banging * some DELL and COMPAQ SMP systems -* Turn on ALP, only we are accpeting Jumbo Packets */ +* Turn on ALP, only we are accepting Jumbo Packets */ writel (RXCFG_AEP |RXCFG_ARP |RXCFG_AIRL |RXCFG_RX_FD |RXCFG_STRIPCRC //| RXCFG_ALPinclude/uapi/linux/udp.h +1
-2@@ -31,7 +31,7 @@ struct udphdr {#define UDP_CORK 1/* Never send partially complete segments */ #define UDP_ENCAP 100/* Set the socket to accept encapsulated packets */ #define UDP_NO_CHECK6_TX 101/* Disable sending checksum for UDP6X */ -#define UDP_NO_CHECK6_RX 102/* Disable accpeting checksum for UDP6 */ +#define UDP_NO_CHECK6_RX 102/* Disable accepting checksum for UDP6 */ #define UDP_SEGMENT 103/* Set GSO segmentation size */ #define UDP_GRO 104/* This socket can receive UDP GRO packets */ --Quoted 3 lines
2.45.2
--
-----Open up your eyes, open up your mind, open up your code -------/ Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
Simon Horman
reviewerQuoted 10 lines · Dr. David Alan Gilbert
Quoted 6 lines · * Alexander Zubkov ([email protected]) wrote:
Hi,
I just wanted to kindly check in on the status of my patch. Please let me know if any further action is needed from my side.
Thanks for your time!
I was only a reviewer on this; it'll need some of the netdev people to notice it for it to get further.
Hi,
Firstly I would suggest splitting the drivers/infiniband change into a separate patch and sending it to the relevant Infiniband maintainers. ./scripts/get_maintainer.pl will help you find them.
And then posting what as left as a patch for net-next. For guidance on that please see:
https://docs.kernel.org/process/maintainer-netdev.html
net-next is currently closed, as the merge window is open. So you will need to wait until net-next reopens before posting your patch for net-next. That will happen after v6.12-rc1 has been released, most likely a little over two weeks from now.
...