Update streaming related documentation
Subsystems (2)
Sakari Ailus
maintainerv3 cover Update streaming related documentation
Hi folks,
This set updates streaming starting and stopping related documentation.
since v2:
- Fix spelling in the commit message of the 1st patch.
- Improved language in the 2nd patch as suggested by Laurent.
since v1:
- Document the use of v4l2_subdev_{en,dis}able_streams() and setting the streams_mask for drivers that do not support streams.
Sakari Ailus (3):
media: Documentation: Deprecate s_stream video op, update docs
media: Documentation: Update {enable,disable}_streams documentation
media: Documentation: Improve v4l2_subdev_{en,dis}able_streams
documentation
.../driver-api/media/camera-sensor.rst | 8 ++++---- Documentation/driver-api/media/tx-rx.rst | 13 ++++++++----- include/media/v4l2-subdev.h | 17 +++++++++++++++-- 3 files changed, 27 insertions(+), 11 deletions(-)
Signature · 1 line
2.39.5
Sakari Ailus
maintainerPATCH v3 1/3 media: Documentation: Deprecate s_stream video op, update docs
The scope of the s_stream video operation is now fully supported by {enable,disable}_streams. Explicitly document the s_stream() op as deprecated and update the related documentation.
--- Documentation/driver-api/media/camera-sensor.rst | 8 ++++---- Documentation/driver-api/media/tx-rx.rst | 13 ++++++++----- include/media/v4l2-subdev.h | 5 +++-- 3 files changed, 15 insertions(+), 11 deletions(-)
Documentation/driver-api/media/camera-sensor.rst +4 -4
@@ -81,10 +81,10 @@ restart when the system is resumed. This requires coordination between the camera sensor and the rest of the camera pipeline. Bridge drivers are responsible for this coordination, and instruct camera sensors to stop and restart streaming by calling the appropriate subdev operations -(``.s_stream()``, ``.enable_streams()`` or ``.disable_streams()``). Camera -sensor drivers shall therefore **not** keep track of the streaming state to -stop streaming in the PM suspend handler and restart it in the resume handler. -Drivers should in general not implement the system PM handlers. +(``.enable_streams()`` or ``.disable_streams()``). Camera sensor drivers shall +therefore **not** keep track of the streaming state to stop streaming in the PM +suspend handler and restart it in the resume handler. Drivers should in general +not implement the system PM handlers. Camera sensor drivers shall **not** implement the subdev ``.s_power()`` operation, as it is deprecated. While this operation is implemented in some
Documentation/driver-api/media/tx-rx.rst +8 -5
@@ -49,11 +49,14 @@ Link frequency The :ref:`V4L2_CID_LINK_FREQ <v4l2-cid-link-freq>` control is used to tell the receiver the frequency of the bus (i.e. it is not the same as the symbol rate). -``.s_stream()`` callback -^^^^^^^^^^^^^^^^^^^^^^^^ +``.enable_streams()`` and ``.disable_streams()`` callbacks +^^^^^^^^^^^^^^^^^^^^^^^^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The struct struct v4l2_subdev_video_ops->s_stream() callback is used by the -receiver driver to control the transmitter driver's streaming state. +The struct v4l2_subdev_pad_ops->enable_streams() and struct +v4l2_subdev_pad_ops->disable_streams() callbacks are used by the receiver driver +to control the transmitter driver's streaming state. These callbacks may not be +called directly, but by using ``v4l2_subdev_enable_streams()`` and +``v4l2_subdev_disable_streams()``. CSI-2 transmitter drivers
@@ -127,7 +130,7 @@ Stopping the transmitter ^^^^^^^^^^^^^^^^^^^^^^^^ A transmitter stops sending the stream of images as a result of -calling the ``.s_stream()`` callback. Some transmitters may stop the +calling the ``.disable_streams()`` callback. Some transmitters may stop the stream at a frame boundary whereas others stop immediately, effectively leaving the current frame unfinished. The receiver driver should not make assumptions either way, but function properly in both
include/media/v4l2-subdev.h +3 -2
@@ -450,8 +450,9 @@ enum v4l2_subdev_pre_streamon_flags {* already started or stopped subdev. Also see call_s_stream wrapper in * v4l2-subdev.c. * -* New drivers should instead implement &v4l2_subdev_pad_ops.enable_streams -* and &v4l2_subdev_pad_ops.disable_streams operations, and use +* This callback is DEPRECATED. New drivers should instead implement +* &v4l2_subdev_pad_ops.enable_streams and +* &v4l2_subdev_pad_ops.disable_streams operations, and use * v4l2_subdev_s_stream_helper for the &v4l2_subdev_video_ops.s_stream * operation to support legacy users. *
Signature · 1 line
2.39.5
Sakari Ailus
maintainerPATCH v3 2/3 media: Documentation: Update {enable,disable}_streams documentation
In reply to Sakari AilusDocument the expected {enable,disable}_streams callback behaviour for drivers that are stream-unaware i.e. don't specify the V4L2_SUBDEV_CAP_STREAMS sub-device capability flat. In this specific case, the mask argument can be ignored.
--- include/media/v4l2-subdev.h | 8 ++++++++ 1 file changed, 8 insertions(+)
include/media/v4l2-subdev.h +8 -0
@@ -834,11 +834,19 @@ struct v4l2_subdev_state {* v4l2_subdev_init_finalize() at initialization time). Do not call * directly, use v4l2_subdev_enable_streams() instead. * +* Drivers that support only a single stream without setting the +* V4L2_SUBDEV_CAP_STREAMS sub-device capability flag can ignore the mask +* argument. +* * @disable_streams: Disable the streams defined in streams_mask on the given * source pad. Subdevs that implement this operation must use the active * state management provided by the subdev core (enabled through a call to * v4l2_subdev_init_finalize() at initialization time). Do not call * directly, use v4l2_subdev_disable_streams() instead. +* +* Drivers that support only a single stream without setting the +* V4L2_SUBDEV_CAP_STREAMS sub-device capability flag can ignore the mask +* argument. */ struct v4l2_subdev_pad_ops { int (*enum_mbus_code)(struct v4l2_subdev *sd,
Signature · 1 line
2.39.5
Re: [PATCH v3 2/3] media: Documentation: Update {enable,disable}_streams documentation
Hi Sakari,
Thank you for the patch.
Quoted 3 lines · Sakari Ailus
Document the expected {enable,disable}_streams callback behaviour for drivers that are stream-unaware i.e. don't specify the
V4L2_SUBDEV_CAP_STREAMSsub-device capability flat. In this specific case,
s/flat/flag/
Quoted 3 lines
the mask argument can be ignored.
Signed-off-by Sakari Ailus <[email protected]>
Quoted 28 lines
--- include/media/v4l2-subdev.h | 8 ++++++++ 1 file changed, 8 insertions(+)include/media/v4l2-subdev.h +8
-0@@ -834,11 +834,19 @@ struct v4l2_subdev_state {* v4l2_subdev_init_finalize() at initialization time). Do not call * directly, use v4l2_subdev_enable_streams() instead. * +* Drivers that support only a single stream without setting the +* V4L2_SUBDEV_CAP_STREAMS sub-device capability flag can ignore the mask +* argument. +* * @disable_streams: Disable the streams defined in streams_mask on the given * source pad. Subdevs that implement this operation must use the active * state management provided by the subdev core (enabled through a call to * v4l2_subdev_init_finalize() at initialization time). Do not call * directly, use v4l2_subdev_disable_streams() instead. +* +* Drivers that support only a single stream without setting the +* V4L2_SUBDEV_CAP_STREAMS sub-device capability flag can ignore the mask +* argument. */ struct v4l2_subdev_pad_ops { int (*enum_mbus_code)(struct v4l2_subdev *sd,
Signature · 3 lines
Regards, Laurent Pinchart
Sakari Ailus
maintainerRe: [PATCH v3 2/3] media: Documentation: Update {enable,disable}_streams documentation
Hi Laurent,
Quoted 9 lines · Laurent Pinchart
Hi Sakari,
Thank you for the patch.
Quoted 3 lines · Sakari Ailus
Document the expected {enable,disable}_streams callback behaviour for drivers that are stream-unaware i.e. don't specify the
V4L2_SUBDEV_CAP_STREAMSsub-device capability flat. In this specific case,
Quoted 7 lines
s/flat/flag/
Quoted 3 lines
the mask argument can be ignored.
Signed-off-by Sakari Ailus <[email protected]>Reviewed-by Laurent Pinchart <[email protected]>
Thanks!
I'll fix the commit message while applying the patch.
Signature · 3 lines
Kind regards, Sakari Ailus
Sakari Ailus
maintainerPATCH v3 3/3 media: Documentation: Improve v4l2_subdev_{en,dis}able_streams documentation
In reply to Sakari AilusDocument that callers of v4l2_subdev_{en,dis}able_streams() need to set the mask to BIT_ULL(0).
--- include/media/v4l2-subdev.h | 4 ++++ 1 file changed, 4 insertions(+)
include/media/v4l2-subdev.h +4 -0
@@ -1685,6 +1685,8 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd,* function implements a best-effort compatibility by calling the .s_stream() * operation, limited to subdevs that have a single source pad. * +* Drivers that are not stream-aware shall set @streams_mask to BIT_ULL(0). +* * Return: * * 0: Success * * -EALREADY: One of the streams in streams_mask is already enabled
@@ -1715,6 +1717,8 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,* function implements a best-effort compatibility by calling the .s_stream() * operation, limited to subdevs that have a single source pad. * +* Drivers that are not stream-aware shall set @streams_mask to BIT_ULL(0). +* * Return: * * 0: Success * * -EALREADY: One of the streams in streams_mask is not enabled
Signature · 1 line
2.39.5
Re: [PATCH v3 3/3] media: Documentation: Improve v4l2_subdev_{en,dis}able_streams documentation
Hi Sakari,
Thank you for the patch.
Quoted 4 lines · Sakari Ailus
Document that callers of v4l2_subdev_{en,dis}able_streams() need to set the mask to
BIT_ULL(0).Signed-off-by Sakari Ailus <[email protected]>
Quoted 26 lines
--- include/media/v4l2-subdev.h | 4 ++++ 1 file changed, 4 insertions(+)include/media/v4l2-subdev.h +4
-0@@ -1685,6 +1685,8 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd,* function implements a best-effort compatibility by calling the .s_stream() * operation, limited to subdevs that have a single source pad. * +* Drivers that are not stream-aware shall set @streams_mask to BIT_ULL(0). +* * Return: * * 0: Success * * -EALREADY: One of the streams in streams_mask is already enabled @@ -1715,6 +1717,8 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,* function implements a best-effort compatibility by calling the .s_stream() * operation, limited to subdevs that have a single source pad. * +* Drivers that are not stream-aware shall set @streams_mask to BIT_ULL(0). +* * Return: * * 0: Success * * -EALREADY: One of the streams in streams_mask is not enabled
Signature · 3 lines
Regards, Laurent Pinchart