Skip to contentSkip to conversation

mfd: twl: Add clock for TWL6030

PATCH Superseded Andreas Kemnade 1 participant 4 messages Oct 5, 2024

Subsystems (3)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Andreas Kemnade

author maintainer
#0 lore raw

v3 cover mfd: twl: Add clock for TWL6030

Previously the clock support for only implemented for TWL6032 so add it also for the TWL6030. There are devices out there where especially WLAN only works if these clocks are enabled by some patched U-Boot. This allows to explicitly specify the clock requirements.

Changes in V3:
- use type enum in driver_data and twl_clock_info
- revert back to store device instead of platform_device

Changes in V2:
- cleanup some defines
- no separate ops for 6030
- remove is_prepared()
- update Kconfig

Andreas Kemnade (3):
mfd: twl-core: Add a clock subdevice for the TWL6030
clk: twl: remove is_prepared
clk: twl: add TWL6030 support

 drivers/clk/Kconfig    |  2 +-
 drivers/clk/clk-twl.c  | 69 ++++++++++++++++++++++++++----------------
 drivers/mfd/twl-core.c | 32 ++++++++++++++------
 3 files changed, 66 insertions(+), 37 deletions(-)
Signature · 1 line
2.39.5
author maintainer
#1 lore raw

PATCH v3 1/3 mfd: twl-core: Add a clock subdevice for the TWL6030

Also the TWL6030 has some clocks, so add a subdevice for that.

---
 drivers/mfd/twl-core.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)
drivers/mfd/twl-core.c +22 -10
index c130ffef182f..c981922f62d5 100644
@@ -711,6 +711,10 @@ static struct of_dev_auxdata twl_auxdata_lookup[] = {
 	{ /* sentinel */ },
 };
 
+static const struct mfd_cell twl6030_cells[] = {
+	{ .name = "twl6030-clk" },
+};
+
 static const struct mfd_cell twl6032_cells[] = {
 	{ .name = "twl6032-clk" },
 };
@@ -861,17 +865,25 @@ twl_probe(struct i2c_client *client)
 				 TWL4030_DCDC_GLOBAL_CFG);
 	}
 
-	if (id->driver_data == (TWL6030_CLASS | TWL6032_SUBCLASS)) {
-		status = devm_mfd_add_devices(&client->dev,
-					      PLATFORM_DEVID_NONE,
-					      twl6032_cells,
-					      ARRAY_SIZE(twl6032_cells),
-					      NULL, 0, NULL);
-		if (status < 0)
-			goto free;
-	}
-
 	if (twl_class_is_6030()) {
+		if (id->driver_data & TWL6032_SUBCLASS) {
+			status = devm_mfd_add_devices(&client->dev,
+						      PLATFORM_DEVID_NONE,
+						      twl6032_cells,
+						      ARRAY_SIZE(twl6032_cells),
+						      NULL, 0, NULL);
+			if (status < 0)
+				goto free;
+		} else {
+			status = devm_mfd_add_devices(&client->dev,
+						      PLATFORM_DEVID_NONE,
+						      twl6030_cells,
+						      ARRAY_SIZE(twl6030_cells),
+						      NULL, 0, NULL);
+			if (status < 0)
+				goto free;
+		}
+
 		if (of_device_is_system_power_controller(node)) {
 			if (!pm_power_off)
 				pm_power_off = twl6030_power_off;
Signature · 1 line
2.39.5
author maintainer
#2 lore raw

PATCH v3 2/3 clk: twl: remove is_prepared

In reply to Andreas Kemnade

Remove is_prepared to simplify adding of TWL6030 support. The default implementation should be enough.

---
 drivers/clk/clk-twl.c | 17 -----------------
 1 file changed, 17 deletions(-)
drivers/clk/clk-twl.c +0 -17
index eab9d3c8ed8a..1d684b358401 100644
@@ -77,26 +77,9 @@ static void twl6032_clks_unprepare(struct clk_hw *hw)
 		dev_err(cinfo->dev, "clk unprepare failed\n");
 }
 
-static int twl6032_clks_is_prepared(struct clk_hw *hw)
-{
-	struct twl_clock_info *cinfo = to_twl_clks_info(hw);
-	int val;
-
-	val = twlclk_read(cinfo, TWL_MODULE_PM_RECEIVER, VREG_STATE);
-	if (val < 0) {
-		dev_err(cinfo->dev, "clk read failed\n");
-		return val;
-	}
-
-	val &= TWL6030_CFG_STATE_MASK;
-
-	return val == TWL6030_CFG_STATE_ON;
-}
-
 static const struct clk_ops twl6032_clks_ops = {
 	.prepare	= twl6032_clks_prepare,
 	.unprepare	= twl6032_clks_unprepare,
-	.is_prepared	= twl6032_clks_is_prepared,
 	.recalc_rate	= twl_clks_recalc_rate,
 };
 
Signature · 1 line
2.39.5
author maintainer
#3 lore raw

PATCH v3 3/3 clk: twl: add TWL6030 support

In reply to Andreas Kemnade

The TWL6030 has similar clocks, so add support for it. Take care of the resource grouping handling needed.

---
 drivers/clk/Kconfig   |  2 +-
 drivers/clk/clk-twl.c | 52 +++++++++++++++++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 10 deletions(-)
drivers/clk/Kconfig +1 -1
index 299bc678ed1b..82ec12f9b82c 100644
@@ -291,7 +291,7 @@ config CLK_TWL
 	help
 	  Enable support for controlling the clock resources on TWL family
 	  PMICs. These devices have some 32K clock outputs which can be
-	  controlled by software. For now, only the TWL6032 clocks are
+	  controlled by software. For now, the TWL6032 and TWL6030 clocks are
 	  supported.
 
 config CLK_TWL6040
drivers/clk/clk-twl.c +43 -9

91 lines not on this page · raw message

Signature · 1 line
2.39.5