Skip to contentSkip to conversation

implement truncation for RAID stripe-extents

PATCH Superseded Johannes Thumshirn 3 participants 6 messages Oct 9, 2024 – Oct 10, 2024 Btrfs file system

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover implement truncation for RAID stripe-extents

From: Johannes Thumshirn <[email protected]>

Implement truncation of RAID stripe-tree entries and add selftests for these two edge cases of deletion to the RAID stripe-tree selftests.

Changes to v2:
- Correctly adjust the btree keys and insert new items instead (Filipe)
- Add selftests

Link to v2:
https://lore.kernel.org/linux-btrfs/[email protected]

Johannes Thumshirn (2):
btrfs: implement partial deletion of RAID stripe extents
btrfs: implement self-tests for partial RAID srtipe-tree delete

 fs/btrfs/raid-stripe-tree.c             |  85 ++++++++-
 fs/btrfs/tests/raid-stripe-tree-tests.c | 223 ++++++++++++++++++++++++
 2 files changed, 304 insertions(+), 4 deletions(-)
Signature · 1 line
2.43.0
#1 lore raw

PATCH v3 1/2 btrfs: implement partial deletion of RAID stripe extents

From: Johannes Thumshirn <[email protected]>

In our CI system, the RAID stripe tree configuration sometimes fails with the following ASSERT():

assertion failed: found_start >= start && found_end <= end, in fs/btrfs/raid-stripe-tree.c:64

This ASSERT()ion triggers, because for the initial design of RAID stripe-tree, I had the "one ordered-extent equals one bio" rule of zoned btrfs in mind.

But for a RAID stripe-tree based system, that is not hosted on a zoned storage device, but on a regular device this rule doesn't apply.

So in case the range we want to delete starts in the middle of the previous item, grab the item and "truncate" it's length. That is, clone the item, subtract the deleted portion from the key's offset, delete the old item and insert the new one.

In case the range to delete ends in the middle of an item, we have to adjust both the item's key as well as the stripe extents and then re-insert the modified clone into the tree after deleting the old stripe extent.

---
 fs/btrfs/raid-stripe-tree.c | 85 +++++++++++++++++++++++++++++++++++--
 1 file changed, 81 insertions(+), 4 deletions(-)
fs/btrfs/raid-stripe-tree.c +81 -4
index 41970bbdb05f..40cc0a392be2 100644
@@ -13,6 +13,54 @@
 #include "volumes.h"
 #include "print-tree.h"
 
+static int btrfs_partially_delete_raid_extent(struct btrfs_trans_handle *trans,
+					      struct btrfs_path *path,
+					      struct btrfs_key *oldkey,
+					      u64 newlen, u64 frontpad)
+{
+	struct btrfs_root *stripe_root = trans->fs_info->stripe_root;
+	struct btrfs_stripe_extent *extent, *new;
+	struct extent_buffer *leaf = path->nodes[0];
+	int slot = path->slots[0];
+	const size_t item_size = btrfs_item_size(leaf, slot);
+	struct btrfs_key newkey;
+	int ret;
+	int i;
+
+	new = kzalloc(item_size, GFP_NOFS);
+	if (!new)
+		return -ENOMEM;
+
+	memcpy(&newkey, oldkey, sizeof(struct btrfs_key));
+	newkey.objectid += frontpad;
+	newkey.offset -= newlen;
+
+	extent = btrfs_item_ptr(leaf, slot, struct btrfs_stripe_extent);
+
+	for (i = 0; i < btrfs_num_raid_stripes(item_size); i++) {
+		u64 devid;
+		u64 phys;
+
+		devid = btrfs_raid_stride_devid(leaf, &extent->strides[i]);
+		btrfs_set_stack_raid_stride_devid(&new->strides[i], devid);
+
+		phys = btrfs_raid_stride_physical(leaf, &extent->strides[i]);
+		phys += frontpad;
+		btrfs_set_stack_raid_stride_physical(&new->strides[i], phys);
+	}
+
+	ret = btrfs_del_item(trans, stripe_root, path);
+	if (ret)
+		goto out;
+
+	btrfs_release_path(path);
+	ret = btrfs_insert_item(trans, stripe_root, &newkey, new, item_size);
+
+ out:
+	kfree(new);
+	return ret;
+}
+
 int btrfs_delete_raid_extent(struct btrfs_trans_handle *trans, u64 start, u64 length)
 {
 	struct btrfs_fs_info *fs_info = trans->fs_info;
@@ -43,9 +91,8 @@ int btrfs_delete_raid_extent(struct btrfs_trans_handle *trans, u64 start, u64 le
 			break;
 		if (ret > 0) {
 			ret = 0;
-			if (path->slots[0] == 0)
-				break;
-			path->slots[0]--;
+			if (path->slots[0] > 0)
+				path->slots[0]--;
 		}
 
 		leaf = path->nodes[0];
@@ -61,7 +108,37 @@ int btrfs_delete_raid_extent(struct btrfs_trans_handle *trans, u64 start, u64 le
 		trace_btrfs_raid_extent_delete(fs_info, start, end,
 					       found_start, found_end);
 
-		ASSERT(found_start >= start && found_end <= end);
+		/*
+		 * The stripe extent starts before the range we want to delete:
+		 *
+		 * |--- RAID Stripe Extent ---|
+		 * |--- keep  ---|--- drop ---|
+		 *
+		 * This means we have to duplicate the tree item, truncate the
+		 * length to the new size and then re-insert the item.
+		 */
+		if (found_start < start) {
+			ret = btrfs_partially_delete_raid_extent(trans, path, &key,
+							start - found_start, 0);
+			break;
+		}
+
+		/*
+		 * The stripe extent ends after the range we want to delete:
+		 *
+		 * |--- RAID Stripe Extent ---|
+		 * |--- drop  ---|--- keep ---|
+		 * This means we have to duplicate the tree item, truncate the
+		 * length to the new size and then re-insert the item.
+		 */
+		if (found_end > end) {
+			u64 diff = found_end - end;
+
+			ret = btrfs_partially_delete_raid_extent(trans, path, &key,
+								 diff, diff);
+			break;
+		}
+
 		ret = btrfs_del_item(trans, stripe_root, path);
 		if (ret)
 			break;
Signature · 1 line
2.43.0
#2 lore raw

Re: [PATCH v3 1/2] btrfs: implement partial deletion of RAID stripe extents

fs/btrfs/raid-stripe-tree.c int btrfs_delete_raid_extent(struct btrfs_trans_handle *trans, u64 start, u64 le · line 98

Quoted 12 lines · Johannes Thumshirn
fs/btrfs/raid-stripe-tree.c +2 -3
@@ -43,9 +91,8 @@ int btrfs_delete_raid_extent(struct btrfs_trans_handle *trans, u64 start, u64 le
  			break;
  		if (ret > 0) {
  			ret = 0;
-			if (path->slots[0] == 0)
-				break;
-			path->slots[0]--;
+			if (path->slots[0] > 0)
+				path->slots[0]--;
  		}
 
  		leaf = path->nodes[0];

That part is wrong, will send a v4 shortly.

#3 lore raw

Re: [PATCH v3 1/2] btrfs: implement partial deletion of RAID stripe extents

In reply to Johannes Thumshirn
Quoted 53 lines · Johannes Thumshirn

From: Johannes Thumshirn <[email protected]>

In our CI system, the RAID stripe tree configuration sometimes fails with the following ASSERT():

assertion failed: found_start >= start && found_end <= end, in fs/btrfs/raid-stripe-tree.c:64

This ASSERT()ion triggers, because for the initial design of RAID stripe-tree, I had the "one ordered-extent equals one bio" rule of zoned btrfs in mind.

But for a RAID stripe-tree based system, that is not hosted on a zoned storage device, but on a regular device this rule doesn't apply.

So in case the range we want to delete starts in the middle of the previous item, grab the item and "truncate" it's length. That is, clone the item, subtract the deleted portion from the key's offset, delete the old item and insert the new one.

In case the range to delete ends in the middle of an item, we have to adjust both the item's key as well as the stripe extents and then re-insert the modified clone into the tree after deleting the old stripe extent.

---
 fs/btrfs/raid-stripe-tree.c | 85 +++++++++++++++++++++++++++++++++++--
 1 file changed, 81 insertions(+), 4 deletions(-)
fs/btrfs/raid-stripe-tree.c +15 -0
index 41970bbdb05f..40cc0a392be2 100644
@@ -13,6 +13,54 @@
 #include "volumes.h"
 #include "print-tree.h"
 
+static int btrfs_partially_delete_raid_extent(struct btrfs_trans_handle *trans,
+                                             struct btrfs_path *path,
+                                             struct btrfs_key *oldkey,
+                                             u64 newlen, u64 frontpad)
+{
+       struct btrfs_root *stripe_root = trans->fs_info->stripe_root;
+       struct btrfs_stripe_extent *extent, *new;
+       struct extent_buffer *leaf = path->nodes[0];
+       int slot = path->slots[0];
+       const size_t item_size = btrfs_item_size(leaf, slot);
+       struct btrfs_key newkey;
+       int ret;
+       int i;
+
+       new = kzalloc(item_size, GFP_NOFS);

fs/btrfs/raid-stripe-tree.c line 40

Quoted 10 lines
fs/btrfs/raid-stripe-tree.c +10 -0
+       if (!new)
+               return -ENOMEM;
+
+       memcpy(&newkey, oldkey, sizeof(struct btrfs_key));
+       newkey.objectid += frontpad;
+       newkey.offset -= newlen;
+
+       extent = btrfs_item_ptr(leaf, slot, struct btrfs_stripe_extent);
+
+       for (i = 0; i < btrfs_num_raid_stripes(item_size); i++) {

The loop variable could be declared here in the for expression, as it's not used anywhere outside it.

Quoted 7 lines
fs/btrfs/raid-stripe-tree.c +7 -0
+               u64 devid;
+               u64 phys;
+
+               devid = btrfs_raid_stride_devid(leaf, &extent->strides[i]);
+               btrfs_set_stack_raid_stride_devid(&new->strides[i], devid);
+
+               phys = btrfs_raid_stride_physical(leaf, &extent->strides[i]);

fs/btrfs/raid-stripe-tree.c line 57

Quoted 10 lines
fs/btrfs/raid-stripe-tree.c +10 -0
+               phys += frontpad;
+               btrfs_set_stack_raid_stride_physical(&new->strides[i], phys);
+       }
+
+       ret = btrfs_del_item(trans, stripe_root, path);
+       if (ret)
+               goto out;
+
+       btrfs_release_path(path);
+       ret = btrfs_insert_item(trans, stripe_root, &newkey, new, item_size);

So instead of doing a deletion followed by an insertion, which implies two searches in the btree and occasional node/leaf merges and splits, can't we do this in a single search?
By adjusting item keys, updating items and duplicating them (followed by updating them), similar to what we do at btrfs_drop_extents() for example.
Otherwise this may result in very high lock contention and extra work.

It's ok for an initial implementation and can be improved later, but I was just curious if there's any reason besides simplicity for now.

Thanks.

Quoted 63 lines
fs/btrfs/raid-stripe-tree.c +38 -5
+
+ out:
+       kfree(new);
+       return ret;
+}
+
 int btrfs_delete_raid_extent(struct btrfs_trans_handle *trans, u64 start, u64 length)
 {
        struct btrfs_fs_info *fs_info = trans->fs_info;
@@ -43,9 +91,8 @@ int btrfs_delete_raid_extent(struct btrfs_trans_handle *trans, u64 start, u64 le
                        break;
                if (ret > 0) {
                        ret = 0;
-                       if (path->slots[0] == 0)
-                               break;
-                       path->slots[0]--;
+                       if (path->slots[0] > 0)
+                               path->slots[0]--;
                }
 
                leaf = path->nodes[0];
@@ -61,7 +108,37 @@ int btrfs_delete_raid_extent(struct btrfs_trans_handle *trans, u64 start, u64 le
                trace_btrfs_raid_extent_delete(fs_info, start, end,
                                               found_start, found_end);
 
-               ASSERT(found_start >= start && found_end <= end);
+               /*
+                * The stripe extent starts before the range we want to delete:
+                *
+                * |--- RAID Stripe Extent ---|
+                * |--- keep  ---|--- drop ---|
+                *
+                * This means we have to duplicate the tree item, truncate the
+                * length to the new size and then re-insert the item.
+                */
+               if (found_start < start) {
+                       ret = btrfs_partially_delete_raid_extent(trans, path, &key,
+                                                       start - found_start, 0);
+                       break;
+               }
+
+               /*
+                * The stripe extent ends after the range we want to delete:
+                *
+                * |--- RAID Stripe Extent ---|
+                * |--- drop  ---|--- keep ---|
+                * This means we have to duplicate the tree item, truncate the
+                * length to the new size and then re-insert the item.
+                */
+               if (found_end > end) {
+                       u64 diff = found_end - end;
+
+                       ret = btrfs_partially_delete_raid_extent(trans, path, &key,
+                                                                diff, diff);
+                       break;
+               }
                ret = btrfs_del_item(trans, stripe_root, path);
                if (ret)
                        break;
--

2.43.0

#4 lore raw

Re: [PATCH v3 1/2] btrfs: implement partial deletion of RAID stripe extents

Quoted 21 lines · Filipe Manana
Quoted 21 lines
fs/btrfs/raid-stripe-tree.c +20 -0
+static int btrfs_partially_delete_raid_extent(struct btrfs_trans_handle *trans,
+                                             struct btrfs_path *path,
+                                             struct btrfs_key *oldkey,
+                                             u64 newlen, u64 frontpad)
+{
+       struct btrfs_root *stripe_root = trans->fs_info->stripe_root;
+       struct btrfs_stripe_extent *extent, *new;
+       struct extent_buffer *leaf = path->nodes[0];
+       int slot = path->slots[0];
+       const size_t item_size = btrfs_item_size(leaf, slot);
+       struct btrfs_key newkey;
+       int ret;
+       int i;
+
+       new = kzalloc(item_size, GFP_NOFS);
+       if (!new)
+               return -ENOMEM;
+
+       memcpy(&newkey, oldkey, sizeof(struct btrfs_key));
+       newkey.objectid += frontpad;
Quoted 8 lines

fs/btrfs/raid-stripe-tree.c line 40

Quoted 5 lines
fs/btrfs/raid-stripe-tree.c +5 -0
+       newkey.offset -= newlen;
+
+       extent = btrfs_item_ptr(leaf, slot, struct btrfs_stripe_extent);
+
+       for (i = 0; i < btrfs_num_raid_stripes(item_size); i++) {

The loop variable could be declared here in the for expression, as it's not used anywhere outside it.

yup will fix that up.

Quoted 26 lines
Quoted 7 lines
fs/btrfs/raid-stripe-tree.c +7 -0
+               u64 devid;
+               u64 phys;
+
+               devid = btrfs_raid_stride_devid(leaf, &extent->strides[i]);
+               btrfs_set_stack_raid_stride_devid(&new->strides[i], devid);
+
+               phys = btrfs_raid_stride_physical(leaf, &extent->strides[i]);

fs/btrfs/raid-stripe-tree.c line 57

Quoted 10 lines
fs/btrfs/raid-stripe-tree.c +10 -0
+               phys += frontpad;
+               btrfs_set_stack_raid_stride_physical(&new->strides[i], phys);
+       }
+
+       ret = btrfs_del_item(trans, stripe_root, path);
+       if (ret)
+               goto out;
+
+       btrfs_release_path(path);
+       ret = btrfs_insert_item(trans, stripe_root, &newkey, new, item_size);

So instead of doing a deletion followed by an insertion, which implies two searches in the btree and occasional node/leaf merges and splits, can't we do this in a single search?
By adjusting item keys, updating items and duplicating them (followed by updating them), similar to what we do at btrfs_drop_extents() for example.
Otherwise this may result in very high lock contention and extra work.

Quoted 2 lines

It's ok for an initial implementation and can be improved later, but I was just curious if there's any reason besides simplicity for now.

I did have a version using btrfs_duplicate_item() and dropped it again. But yes sure I can resurrect it.

But firstly I have to find out why both of these (- and +) are buggy.

- if (path->slots[0] == 0)
- break;
- path->slots[0]--;
+ if (path->slots[0] > 0)
+ path->slots[0]--;

The '-' version passes xfstests but not the selftest (as it's the 1st item in the tree, so it doesn't find it and bail out), the '+' version passes the selftest but gives FS data corruption on xfstests, because it deletes the wrong data.

#5 lore raw

PATCH v3 2/2 btrfs: implement self-tests for partial RAID srtipe-tree delete

In reply to Johannes Thumshirn

From: Johannes Thumshirn <[email protected]>

Implement self-tests for partial deletion of RAID stripe-tree entries.

These two new tests cover both the deletion of the front of a RAID stripe-tree stripe extent as well as truncation of an item to make it smaller.

---
 fs/btrfs/tests/raid-stripe-tree-tests.c | 223 ++++++++++++++++++++++++
 1 file changed, 223 insertions(+)
fs/btrfs/tests/raid-stripe-tree-tests.c +223 -0
index b8013ab13c43..dafa6a9addee 100644
@@ -29,6 +29,227 @@ static struct btrfs_device *btrfs_device_by_devid(struct btrfs_fs_devices *fs_de
 	return NULL;
 }
 
+/*
+ * Test a 64K RST write on a 2 disk RAID1 at a logical address of 1M and then
+ * delete the 1st 32K, making the new start address 1M+32K.
+ */
+static int test_front_delete(struct btrfs_trans_handle *trans)
+{
+	struct btrfs_fs_info *fs_info = trans->fs_info;
+	struct btrfs_io_context *bioc;
+	struct btrfs_io_stripe io_stripe = { 0 };
+	u64 map_type = RST_TEST_RAID1_TYPE;
+	u64 logical = SZ_1M;
+	u64 len = SZ_64K;
+	int ret;
+
+	bioc = alloc_btrfs_io_context(fs_info, logical, RST_TEST_NUM_DEVICES);
+	if (!bioc) {
+		test_std_err(TEST_ALLOC_IO_CONTEXT);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	io_stripe.dev = btrfs_device_by_devid(fs_info->fs_devices, 0);
+	bioc->map_type = map_type;
+	bioc->size = len;
+
+	for (int i = 0; i < RST_TEST_NUM_DEVICES; i++) {
+		struct btrfs_io_stripe *stripe = &bioc->stripes[i];
+
+		stripe->dev = btrfs_device_by_devid(fs_info->fs_devices, i);
+		if (!stripe->dev) {
+			test_err("cannot find device with devid %d", i);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		stripe->physical = logical + i * SZ_1G;
+	}
+
+	ret = btrfs_insert_one_raid_extent(trans, bioc);
+	if (ret) {
+		test_err("inserting RAID extent failed: %d", ret);
+		goto out;
+	}
+
+	ret = btrfs_get_raid_extent_offset(fs_info, logical, &len, map_type, 0,
+					   &io_stripe);
+	if (ret) {
+		test_err("lookup of RAID extent [%llu, %llu] failed", logical,
+			 logical + len);
+		goto out;
+	}
+
+	if (io_stripe.physical != logical) {
+		test_err("invalid physical address, expected %llu got %llu",
+			 logical, io_stripe.physical);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (len != SZ_64K) {
+		test_err("invalid stripe length, expected %llu got %llu",
+			 (u64)SZ_64K, len);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = btrfs_delete_raid_extent(trans, logical, SZ_32K);
+	if (ret) {
+		test_err("deleting RAID extent [%llu, %llu] failed", logical,
+			 logical + SZ_32K);
+		goto out;
+	}
+
+	len = SZ_32K;
+	ret = btrfs_get_raid_extent_offset(fs_info, logical + SZ_32K, &len,
+					   map_type, 0, &io_stripe);
+	if (ret) {
+		test_err("lookup of RAID extent [%llu, %llu] failed",
+			 logical + SZ_32K, logical + SZ_32K + len);
+		goto out;
+	}
+
+	if (io_stripe.physical != logical + SZ_32K) {
+		test_err("invalid physical address, expected %llu, got %llu",
+			 logical + SZ_32K, io_stripe.physical);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (len != SZ_32K) {
+		test_err("invalid stripe length, expected %llu, got %llu",
+			 (u64)SZ_32K, len);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = btrfs_get_raid_extent_offset(fs_info, logical, &len, map_type, 0,
+					   &io_stripe);
+	if (!ret) {
+		ret = -EINVAL;
+		test_err("lookup of RAID extent [%llu, %llu] succeeded, should fail",
+			 logical, logical + len);
+		goto out;
+	}
+
+	ret = btrfs_delete_raid_extent(trans, logical + SZ_32K, SZ_32K);
+ out:
+	return ret;
+}
+
+/*
+ * Test a 64K RST write on a 2 disk RAID1 at a logical address of 1M and then
+ * truncate the stripe extent down to 32K.
+ */
+static int test_tail_delete(struct btrfs_trans_handle *trans)
+{
+	struct btrfs_fs_info *fs_info = trans->fs_info;
+	struct btrfs_io_context *bioc;
+	struct btrfs_io_stripe io_stripe = { 0 };
+	u64 map_type = RST_TEST_RAID1_TYPE;
+	u64 logical = SZ_1M;
+	u64 len = SZ_64K;
+	int ret;
+
+	bioc = alloc_btrfs_io_context(fs_info, logical, RST_TEST_NUM_DEVICES);
+	if (!bioc) {
+		test_std_err(TEST_ALLOC_IO_CONTEXT);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	io_stripe.dev = btrfs_device_by_devid(fs_info->fs_devices, 0);
+	bioc->map_type = map_type;
+	bioc->size = len;
+
+	for (int i = 0; i < RST_TEST_NUM_DEVICES; i++) {
+		struct btrfs_io_stripe *stripe = &bioc->stripes[i];
+
+		stripe->dev = btrfs_device_by_devid(fs_info->fs_devices, i);
+		if (!stripe->dev) {
+			test_err("cannot find device with devid %d", i);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		stripe->physical = logical + i * SZ_1G;
+	}
+
+	ret = btrfs_insert_one_raid_extent(trans, bioc);
+	if (ret) {
+		test_err("inserting RAID extent failed: %d", ret);
+		goto out;
+	}
+
+	io_stripe.dev = btrfs_device_by_devid(fs_info->fs_devices, 0);
+	if (!io_stripe.dev) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = btrfs_get_raid_extent_offset(fs_info, logical, &len, map_type, 0,
+					   &io_stripe);
+	if (ret) {
+		test_err("lookup of RAID extent [%llu, %llu] failed", logical,
+			 logical + len);
+		goto out;
+	}
+
+	if (io_stripe.physical != logical) {
+		test_err("invalid physical address, expected %llu got %llu",
+			 logical, io_stripe.physical);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (len != SZ_64K) {
+		test_err("invalid stripe length, expected %llu got %llu",
+			 (u64)SZ_64K, len);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = btrfs_delete_raid_extent(trans, logical + SZ_32K, SZ_32K);
+	if (ret) {
+		test_err("deleting RAID extent [%llu, %llu] failed",
+			 logical + SZ_32K, logical + SZ_64K);
+		goto out;
+	}
+
+	len = SZ_32K;
+	ret = btrfs_get_raid_extent_offset(fs_info, logical, &len, map_type, 0, &io_stripe);
+	if (ret) {
+		test_err("lookup of RAID extent [%llu, %llu] failed", logical,
+			 logical + len);
+		goto out;
+	}
+
+	if (io_stripe.physical != logical) {
+		test_err("invalid physical address, expected %llu, got %llu",
+			 logical, io_stripe.physical);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (len != SZ_32K) {
+		test_err("invalid stripe length, expected %llu, got %llu",
+			 (u64)SZ_32K, len);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = btrfs_delete_raid_extent(trans, logical, len);
+	if (ret)
+		test_err("deleting RAID extent [%llu, %llu] failed", logical,
+			 logical + len);
+
+out:
+	btrfs_put_bioc(bioc);
+	return ret;
+}
+
 /*
  * Test a 64K RST write on a 2 disk RAID1 at a logical address of 1M and then
  * overwrite the whole range giving it new physical address at an offset of 1G.
@@ -235,6 +456,8 @@ static int test_simple_create_delete(struct btrfs_trans_handle *trans)
 static const test_func_t tests[] = {
 	test_simple_create_delete,
 	test_create_update_delete,
+	test_tail_delete,
+	test_front_delete,
 };
 
 static int run_test(test_func_t test, u32 sectorsize, u32 nodesize)
Signature · 1 line
2.43.0