Skip to contentSkip to conversation

perf probe: Correct demangled symbols in C++ program

PATCH Applied Leo Yan 3 participants 3 messages Oct 12, 2024 – Oct 18, 2024 perf events

lore
Share & tools
lore

Leo Yan

author
#0 lore raw

PATCH 1/1 perf probe: Correct demangled symbols in C++ program

An issue can be observed when probe C++ demangled symbol with steps:

  # nm test_cpp_mangle | grep print_data
    0000000000000c94 t _GLOBAL__sub_I__Z10print_datai
    0000000000000afc T _Z10print_datai
    0000000000000b38 T _Z10print_dataR5Point
  # perf probe -x /home/niayan01/test_cpp_mangle -F --demangle
    ...
    print_data(Point&)
    print_data(int)
    ...
  # perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
    probe-definition(0): test=print_data(int)
    symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
    0 arguments
    Open Debuginfo file: /home/niayan01/test_cpp_mangle
    Try to find probe point from debuginfo.
    Symbol print_data(int) address found : afc
    Matched function: print_data [2ccf]
    Probe point found: print_data+0
    Found 1 probe_trace_events.
    Opening /sys/kernel/tracing//uprobe_events write=1
    Opening /sys/kernel/tracing//README write=0
    Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xb38
    ...

When tried to probe symbol "print_data(int)", the log shows:

Symbol print_data(int) address found : afc

The found address is 0xafc - which is right with verifying the output result from nm. Afterwards when write event, the command uses offset 0xb38 in the last log, which is a wrong address.

The dwarf_diename() gets a common function name, in above case, it returns string "print_data". As a result, the tool parses the offset based on the common name. This leads to probe at the wrong symbol "print_data(Point&)".

To fix the issue, use the die_get_linkage_name() function to retrieve the distinct linkage name - this is the mangled name for the C++ case. Based on this unique name, the tool can get a correct offset for probing. Based on DWARF doc, it is possible the linkage name is missed in the DIE, it rolls back to use dwarf_diename().

After:

  # perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
    probe-definition(0): test=print_data(int)
    symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
    0 arguments
    Open Debuginfo file: /home/niayan01/test_cpp_mangle
    Try to find probe point from debuginfo.
    Symbol print_data(int) address found : afc
    Matched function: print_data [2d06]
    Probe point found: print_data+0
    Found 1 probe_trace_events.
    Opening /sys/kernel/tracing//uprobe_events write=1
    Opening /sys/kernel/tracing//README write=0
    Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xafc
    Added new event:
      probe_test_cpp_mangle:test (on print_data(int) in /home/niayan01/test_cpp_mangle)

You can now use it in all perf tools, such as:

perf record -e probe_test_cpp_mangle:test -aR sleep 1

  # perf --debug verbose=3 probe -x test_cpp_mangle --add "test2=print_data(Point&)"
    probe-definition(0): test2=print_data(Point&)
    symbol:print_data(Point&) file:(null) line:0 offset:0 return:0 lazy:(null)
    0 arguments
    Open Debuginfo file: /home/niayan01/test_cpp_mangle
    Try to find probe point from debuginfo.
    Symbol print_data(Point&) address found : b38
    Matched function: print_data [2ccf]
    Probe point found: print_data+0
    Found 1 probe_trace_events.
    Opening /sys/kernel/tracing//uprobe_events write=1
    Parsing probe_events: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0x0000000000000afc
    Group:probe_test_cpp_mangle Event:test probe:p
    Opening /sys/kernel/tracing//README write=0
    Writing event: p:probe_test_cpp_mangle/test2 /home/niayan01/test_cpp_mangle:0xb38
    Added new event:
      probe_test_cpp_mangle:test2 (on print_data(Point&) in /home/niayan01/test_cpp_mangle)

You can now use it in all perf tools, such as:

perf record -e probe_test_cpp_mangle:test2 -aR sleep 1

Fixes fb1587d869a3 ("perf probe: List probes with line number and file name")
---
 tools/perf/util/probe-finder.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
tools/perf/util/probe-finder.c +15 -2
index 630e16c54ed5..498ccfb0be6f 100644
@@ -1583,8 +1583,21 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, u64 addr,
 
 	/* Find a corresponding function (name, baseline and baseaddr) */
 	if (die_find_realfunc(&cudie, (Dwarf_Addr)addr, &spdie)) {
-		/* Get function entry information */
-		func = basefunc = dwarf_diename(&spdie);
+		/*
+		 * Get function entry information.
+		 *
+		 * As described in the document DWARF Debugging Information
+		 * Format Version 5, section 2.22 Linkage Names, "mangled names,
+		 * are used in various ways, ... to distinguish multiple
+		 * entities that have the same name".
+		 *
+		 * Firstly try to get distinct linkage name, if fail then
+		 * rollback to get associated name in DIE.
+		 */
+		func = basefunc = die_get_linkage_name(&spdie);
+		if (!func)
+			func = basefunc = dwarf_diename(&spdie);
+
 		if (!func ||
 		    die_entrypc(&spdie, &baseaddr) != 0 ||
 		    dwarf_decl_line(&spdie, &baseline) != 0) {
Signature · 1 line
2.25.1
Acked-by on v1 1/1
#1 lore raw
Quoted 87 lines · On Sat, 12 Oct 2024 15:14:32 +0100 Leo Yan <[email protected]> wrote:

An issue can be observed when probe C++ demangled symbol with steps:

  # nm test_cpp_mangle | grep print_data
    0000000000000c94 t _GLOBAL__sub_I__Z10print_datai
    0000000000000afc T _Z10print_datai
    0000000000000b38 T _Z10print_dataR5Point
  # perf probe -x /home/niayan01/test_cpp_mangle -F --demangle
    ...
    print_data(Point&)
    print_data(int)
    ...
  # perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
    probe-definition(0): test=print_data(int)
    symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
    0 arguments
    Open Debuginfo file: /home/niayan01/test_cpp_mangle
    Try to find probe point from debuginfo.
    Symbol print_data(int) address found : afc
    Matched function: print_data [2ccf]
    Probe point found: print_data+0
    Found 1 probe_trace_events.
    Opening /sys/kernel/tracing//uprobe_events write=1
    Opening /sys/kernel/tracing//README write=0
    Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xb38
    ...

When tried to probe symbol "print_data(int)", the log shows:

Symbol print_data(int) address found : afc

The found address is 0xafc - which is right with verifying the output result from nm. Afterwards when write event, the command uses offset 0xb38 in the last log, which is a wrong address.

The dwarf_diename() gets a common function name, in above case, it returns string "print_data". As a result, the tool parses the offset based on the common name. This leads to probe at the wrong symbol "print_data(Point&)".

To fix the issue, use the die_get_linkage_name() function to retrieve the distinct linkage name - this is the mangled name for the C++ case. Based on this unique name, the tool can get a correct offset for probing. Based on DWARF doc, it is possible the linkage name is missed in the DIE, it rolls back to use dwarf_diename().

After:

  # perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
    probe-definition(0): test=print_data(int)
    symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
    0 arguments
    Open Debuginfo file: /home/niayan01/test_cpp_mangle
    Try to find probe point from debuginfo.
    Symbol print_data(int) address found : afc
    Matched function: print_data [2d06]
    Probe point found: print_data+0
    Found 1 probe_trace_events.
    Opening /sys/kernel/tracing//uprobe_events write=1
    Opening /sys/kernel/tracing//README write=0
    Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xafc
    Added new event:
      probe_test_cpp_mangle:test (on print_data(int) in /home/niayan01/test_cpp_mangle)

You can now use it in all perf tools, such as:

perf record -e probe_test_cpp_mangle:test -aR sleep 1

  # perf --debug verbose=3 probe -x test_cpp_mangle --add "test2=print_data(Point&)"
    probe-definition(0): test2=print_data(Point&)
    symbol:print_data(Point&) file:(null) line:0 offset:0 return:0 lazy:(null)
    0 arguments
    Open Debuginfo file: /home/niayan01/test_cpp_mangle
    Try to find probe point from debuginfo.
    Symbol print_data(Point&) address found : b38
    Matched function: print_data [2ccf]
    Probe point found: print_data+0
    Found 1 probe_trace_events.
    Opening /sys/kernel/tracing//uprobe_events write=1
    Parsing probe_events: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0x0000000000000afc
    Group:probe_test_cpp_mangle Event:test probe:p
    Opening /sys/kernel/tracing//README write=0
    Writing event: p:probe_test_cpp_mangle/test2 /home/niayan01/test_cpp_mangle:0xb38
    Added new event:
      probe_test_cpp_mangle:test2 (on print_data(Point&) in /home/niayan01/test_cpp_mangle)
Quoted 4 lines

You can now use it in all perf tools, such as:

perf record -e probe_test_cpp_mangle:test2 -aR sleep 1

This looks good to me.

Thank you!

Quoted 38 lines
Fixes fb1587d869a3 ("perf probe: List probes with line number and file name")
---
 tools/perf/util/probe-finder.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
tools/perf/util/probe-finder.c +15 -2
index 630e16c54ed5..498ccfb0be6f 100644
@@ -1583,8 +1583,21 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, u64 addr,
 
 	/* Find a corresponding function (name, baseline and baseaddr) */
 	if (die_find_realfunc(&cudie, (Dwarf_Addr)addr, &spdie)) {
-		/* Get function entry information */
-		func = basefunc = dwarf_diename(&spdie);
+		/*
+		 * Get function entry information.
+		 *
+		 * As described in the document DWARF Debugging Information
+		 * Format Version 5, section 2.22 Linkage Names, "mangled names,
+		 * are used in various ways, ... to distinguish multiple
+		 * entities that have the same name".
+		 *
+		 * Firstly try to get distinct linkage name, if fail then
+		 * rollback to get associated name in DIE.
+		 */
+		func = basefunc = die_get_linkage_name(&spdie);
+		if (!func)
+			func = basefunc = dwarf_diename(&spdie);
+
 		if (!func ||
 		    die_entrypc(&spdie, &baseaddr) != 0 ||
 		    dwarf_decl_line(&spdie, &baseline) != 0) {
Signature · 1 line
2.25.1
Signature · 1 line
Masami Hiramatsu (Google) <[email protected]>
maintainer Applied
#2 lore raw
In reply to Leo Yan
Quoted 8 lines · Leo Yan

An issue can be observed when probe C++ demangled symbol with steps:

  # nm test_cpp_mangle | grep print_data
    0000000000000c94 t _GLOBAL__sub_I__Z10print_datai
    0000000000000afc T _Z10print_datai
    0000000000000b38 T _Z10print_dataR5Point

[...]

Applied to perf-tools-next, thanks!

Best regards,
Namhyung