Skip to contentSkip to conversation

media: Add t4ka3 camera sensor driver

PATCH Superseded Kate Hsuan 1 participant 1 message Oct 15, 2024

Subsystems (2)

v4 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Kate Hsuan

author maintainer
#0 lore raw

PATCH v4 1/1 media: Add t4ka3 camera sensor driver

Add the t4ka3 driver from:
https://github.com/kitakar5525/surface3-atomisp-cameras.git

With many cleanups / changes (almost a full rewrite) to make it suitable for upstream:

* Remove the VCM and VCM-OTP support, the mainline kernel models VCMs and calibration data eeproms as separate v4l2-subdev-s.

* Remove the integration-factor t4ka3_get_intg_factor() support and IOCTL, this provided info to userspace through an atomisp private IOCTL.

* Turn atomisp specific exposure/gain IOCTL into standard v4l2 controls.

* Use normal ACPI power-management in combination with runtime-pm support instead of atomisp specific GMIN power-management code.

* Turn into a standard V4L2 sensor driver using
v4l2_async_register_subdev_sensor().

* Add vblank, hblank, and link-freq controls; drop get_frame_interval().

* Use CCI register helpers.

* Calculate values for modes instead of using fixed register-value lists, allowing arbritrary modes.

* Add get_selection() and set_selection() support

* Add a CSI2 bus configuration check

This been tested on a Xiaomi Mipad2 tablet which has a T4KA3 sensor with DW9761 VCM as back sensor.

---
Changes in v4:
1. Another CI issue fixes.

Changes in v3:
1. Fix the issues reported by the CI system.

Changes in v2:
1. The regmap information was obtained before configuring runtime PM so probe() can return without disabling runtime PM.
2. In t4ka3_s_stream(), return -EBUSY when the streaming is enabled.

---
 drivers/media/i2c/Kconfig  |    9 +
 drivers/media/i2c/Makefile |    1 +
 drivers/media/i2c/t4ka3.c  | 1120 ++++++++++++++++++++++++++++++++++++
 3 files changed, 1130 insertions(+)
 create mode 100644 drivers/media/i2c/t4ka3.c
drivers/media/i2c/Kconfig +9 -0
index 8ba096b8ebca..38aba3624669 100644
@@ -690,6 +690,15 @@ config VIDEO_S5K6A3
 	  This is a V4L2 sensor driver for Samsung S5K6A3 raw
 	  camera sensor.
 
+config VIDEO_T4KA3
+	tristate "Toshiba T4KA3 sensor support"
+	depends on ACPI || COMPILE_TEST
+	depends on GPIOLIB
+	select V4L2_CCI_I2C
+	help
+	  This is a Video4Linux2 sensor driver for the Toshiba T4KA3 8 MP
+	  camera sensor.
+
 config VIDEO_VGXY61
 	tristate "ST VGXY61 sensor support"
 	select V4L2_CCI_I2C
drivers/media/i2c/Makefile +1 -0
index fbb988bd067a..ad67ea33ce37 100644
@@ -129,6 +129,7 @@ obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o
 obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
 obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
 obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
+obj-$(CONFIG_VIDEO_T4KA3) += t4ka3.o
 obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
 obj-$(CONFIG_VIDEO_TC358746) += tc358746.o
 obj-$(CONFIG_VIDEO_TDA1997X) += tda1997x.o
drivers/media/i2c/t4ka3.c new file +1120 -0

1,120 lines not on this page · raw message

Signature · 1 line
2.46.2