dt-bindings: regulator: lltc,ltc3676: convert to YAML
Subsystems (2)
PATCH v2 1/1 dt-bindings: regulator: lltc,ltc3676: convert to YAML
Convert Linear Technology LTC3676 8-output I2C voltage regulator IC DT bindings to DT schema. Add missing interrupts: property as this IC does have interrupt line and it is used in existing DTs.
---
Cc: Conor Dooley <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Tim Harvey <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
V2: - Move unevaluatedProperties and additionalProperties just below type:object
- Use DT schema to refer to the lltc,ltc3676.yaml file
- Add RB from Krzysztof
--- .../bindings/regulator/lltc,ltc3676.yaml | 167 ++++++++++++++++++ .../devicetree/bindings/regulator/ltc3676.txt | 94 ---------- 2 files changed, 167 insertions(+), 94 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/lltc,ltc3676.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/ltc3676.txt
Documentation/devicetree/bindings/regulator/lltc,ltc3676.yaml new file +167 -0
@@ -0,0 +1,167 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/lltc,ltc3676.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linear Technology LTC3676 8-output regulators + +maintainers: + - Tim Harvey <[email protected]> + +description: | + LTC3676 contains eight regulators, 4 switching SW1..SW4 and four LDO1..4 . + +properties: + compatible: + const: lltc,ltc3676 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + type: object + additionalProperties: false + description: | + List of regulators provided by this controller, must be named + after their hardware counterparts (SW|LDO)[1-4]. + + patternProperties: + "^(sw[1-4]|ldo[24])$": + type: object + unevaluatedProperties: false + $ref: regulator.yaml# + description: + Properties for single SW or LDO regulator. Regulators SW1..SW4 can + regulate the feedback reference from 412.5mV to 800mV in 12.5 mV + steps. The output voltage thus ranges between 0.4125 * (1 + R1/R2) V + and 0.8 * (1 + R1/R2) V. + Regulators LDO1, LDO2, LDO4 have a fixed 0.725 V reference and thus + output 0.725 * (1 + R1/R2) V. + The LDO1 standby regulator can not be disabled and thus should have + the regulator-always-on property set. + + properties: + lltc,fb-voltage-divider: + description: + An array of two integers containing the resistor values + R1 and R2 of the feedback voltage divider in ohms. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + + required: + - lltc,fb-voltage-divider + + properties: + ldo1: + type: object + unevaluatedProperties: false + $ref: regulator.yaml# + description: + The LDO1 standby regulator can not be disabled and thus should + have the regulator-always-on property set. See patternProperties + description above for the rest of the details. + + properties: + lltc,fb-voltage-divider: + description: + An array of two integers containing the resistor values + R1 and R2 of the feedback voltage divider in ohms. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + + required: + - lltc,fb-voltage-divider + - regulator-always-on + + ldo3: + type: object + unevaluatedProperties: false + $ref: regulator.yaml# + description: + The LDO3 regulator is fixed to 1.8 V. See patternProperties + description above for the rest of the details. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <200400>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <130800>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <168400>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + };
Documentation/devicetree/bindings/regulator/ltc3676.txt deleted +0 -94
94 lines not on this page · raw message
Signature · 1 line
2.45.2
Mark Brown
maintainerQuoted 5 lines · Marek Vasut
Convert Linear Technology LTC3676 8-output I2C voltage regulator IC DT bindings to DT schema. Add missing interrupts: property as this IC does have interrupt line and it is used in existing DTs.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/1] dt-bindings: regulator: lltc,ltc3676: convert to YAML
commit: eab92ea3c1c31b6917fa1665ac8a30c21d9eabfa
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark