FAILED: patch "[PATCH] x86/bugs: Use code segment selector for VERW operand" failed to apply to 6.1-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x e4d2102018542e3ae5e297bc6e229303abff8a0f
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2024102128-omega-phosphate-db6c@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e4d2102018542e3ae5e297bc6e229303abff8a0f Mon Sep 17 00:00:00 2001
From: Pawan Gupta <[email protected]>
Date: Thu, 26 Sep 2024 09:10:31 -0700
Subject: [PATCH] x86/bugs: Use code segment selector for VERW operand
Robert Gill reported below #GP in 32-bit mode when dosemu software was executing vm86() system call:
general protection fault: 0000 [#1] PREEMPT SMP CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1 Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010 EIP: restore_all_switch_stack+0xbe/0xcf EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0 Call Trace: show_regs+0x70/0x78 die_addr+0x29/0x70 exc_general_protection+0x13c/0x348 exc_bounds+0x98/0x98 handle_exception+0x14d/0x14d exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf
This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS are enabled. This is because segment registers with an arbitrary user value can result in #GP when executing VERW. Intel SDM vol. 2C documents the following behavior for VERW instruction:
#GP(0) - If a memory operand effective address is outside the CS, DS, ES,
FS, or GS segment limit.
CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user space. Use %cs selector to reference VERW operand. This ensures VERW will not #GP for an arbitrary user %ds.
[ mingo: Fixed the SOB chain. ]
arch/x86/include/asm/nospec-branch.h +10 -1
@@ -323,7 +323,16 @@* Note: Only the memory operand variant of VERW clears the CPU buffers. */ .macro CLEAR_CPU_BUFFERS - ALTERNATIVE "", __stringify(verw _ASM_RIP(mds_verw_sel)), X86_FEATURE_CLEAR_CPU_BUF +#ifdef CONFIG_X86_64 + ALTERNATIVE "", "verw mds_verw_sel(%rip)", X86_FEATURE_CLEAR_CPU_BUF +#else +/* +* In 32bit mode, the memory operand must be a %cs reference. The data +* segments may not be usable (vm86 mode), and the stack segment may not +* be flat (ESPFIX32). +*/ +ALTERNATIVE "" ,"verw %cs:mds_verw_sel" ,X86_FEATURE_CLEAR_CPU_BUF +#endif .endm#ifdef CONFIG_X86_64
Pawan Gupta
reviewerHi Greg,
Quoted 5 lines · On Mon, Oct 21, 2024 at 10:13:29AM +0200, [email protected] wrote:
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
I will send the backport for this and the older kernels where the patch fails to apply.
Thanks,
Pawan
Pawan Gupta
reviewerPATCH 1/1 x86/bugs: Use code segment selector for VERW operand
In reply to [email protected]commit e4d2102018542e3ae5e297bc6e229303abff8a0f upstream.
Robert Gill reported below #GP in 32-bit mode when dosemu software was executing vm86() system call:
general protection fault: 0000 [#1] PREEMPT SMP CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1 Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010 EIP: restore_all_switch_stack+0xbe/0xcf EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0 Call Trace: show_regs+0x70/0x78 die_addr+0x29/0x70 exc_general_protection+0x13c/0x348 exc_bounds+0x98/0x98 handle_exception+0x14d/0x14d exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf
This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS are enabled. This is because segment registers with an arbitrary user value can result in #GP when executing VERW. Intel SDM vol. 2C documents the following behavior for VERW instruction:
#GP(0) - If a memory operand effective address is outside the CS, DS, ES,
FS, or GS segment limit.
CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user space. Use %cs selector to reference VERW operand. This ensures VERW will not #GP for an arbitrary user %ds.
[ mingo: Fixed the SOB chain. ]
[ pawan: Backported to 6.1 ]
---
Backport is boot tested on x86 64 and 32 bit mode.
arch/x86/include/asm/nospec-branch.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
arch/x86/include/asm/nospec-branch.h +10 -1
@@ -211,7 +211,16 @@*/ .macro CLEAR_CPU_BUFFERS ALTERNATIVE "jmp .Lskip_verw_\@", "", X86_FEATURE_CLEAR_CPU_BUF - verw _ASM_RIP(mds_verw_sel) +#ifdef CONFIG_X86_64 + verw mds_verw_sel(%rip) +#else +/* +* In 32bit mode, the memory operand must be a %cs reference. The data +* segments may not be usable (vm86 mode), and the stack segment may not +* be flat (ESPFIX32). +*/ + verw %cs:mds_verw_sel +#endif .Lskip_verw_\@: .endm
base-commit: 54d90d17e8cee20b163d395829162cec92b583f4
Signature · 1 line
2.34.1