6.1.114-rc1 review
Subsystems (3)
Greg Kroah-Hartman
maintainercover 6.1.114-rc1 review
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 6.1.114-rc1
Vasiliy Kovalev <[email protected]>
ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2
Nicholas Piggin <[email protected]>
powerpc/64: Add big-endian ELFv2 flavour to crypto VMX asm generation
Ryusuke Konishi <[email protected]>
nilfs2: propagate directory read errors from nilfs_find_entry()
Paolo Abeni <[email protected]>
mptcp: prevent MPC handshake on port-based signal endpoints
Paolo Abeni <[email protected]>
tcp: fix mptcp DSS corruption due to large pmtu xmit
Nam Cao <[email protected]>
irqchip/sifive-plic: Unmask interrupt in plic_irq_enable()
Marc Zyngier <[email protected]>
irqchip/gic-v4: Don't allow a VMOVP on a dying VPE
Ma Ke <[email protected]>
pinctrl: apple: check devm_kasprintf() returned value
Sergey Matsievskiy <[email protected]>
pinctrl: ocelot: fix system hang on level based interrupts
Longlong Xia <[email protected]>
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
Pawan Gupta <[email protected]>
x86/entry_32: Clear CPU buffers after register restore in NMI return
Pawan Gupta <[email protected]>
x86/entry_32: Do not clobber user EFLAGS.ZF
Zhang Rui <[email protected]>
x86/apic: Always explicitly disarm TSC-deadline timer
Nathan Chancellor <[email protected]>
x86/resctrl: Annotate get_mem_config() functions as __init
Takashi Iwai <[email protected]>
parport: Proper fix for array out-of-bounds access
Prashanth K <[email protected]>
usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG
Daniele Palmas <[email protected]>
USB: serial: option: add Telit FN920C04 MBIM compositions
Benjamin B. Frost <[email protected]>
USB: serial: option: add support for Quectel EG916Q-GL
Mathias Nyman <[email protected]>
xhci: Mitigate failed set dequeue pointer commands
Mathias Nyman <[email protected]>
xhci: Fix incorrect stream context type macro
Luiz Augusto von Dentz <[email protected]>
Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001
Aaron Thompson <[email protected]>
Bluetooth: ISO: Fix multiple init when debugfs is disabled
Aaron Thompson <[email protected]>
Bluetooth: Remove debugfs directory on module init failure
Aaron Thompson <[email protected]>
Bluetooth: Call iso_exit() on module unload
Javier Carrasco <[email protected]>
iio: adc: ti-ads124s08: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
Javier Carrasco <[email protected]>
iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
Javier Carrasco <[email protected]>
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
Javier Carrasco <[email protected]>
iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
Javier Carrasco <[email protected]>
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
Emil Gedenryd <[email protected]>
iio: light: opt3001: add missing full-scale range value
Javier Carrasco <[email protected]>
iio: light: veml6030: fix IIO device retrieval from embedded device
Javier Carrasco <[email protected]>
iio: light: veml6030: fix ALS sensor resolution
Christophe JAILLET <[email protected]>
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
Javier Carrasco <[email protected]>
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
Javier Carrasco <[email protected]>
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
Javier Carrasco <[email protected]>
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
Javier Carrasco <[email protected]>
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
Mohammed Anees <[email protected]>
drm/amdgpu: prevent BO_HANDLES error from being overwritten
Alex Deucher <[email protected]>
drm/amdgpu/swsmu: Only force workload setup on init
Nikolay Kuratov <[email protected]>
drm/vmwgfx: Handle surface check failure correctly
Ville Syrjälä <[email protected]>
drm/radeon: Fix encoder->possible_clones
Seunghwan Baek <[email protected]>
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
Jens Axboe <[email protected]>
io_uring/sqpoll: close race on waiting for sqring entries
Omar Sandoval <[email protected]>
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
Johannes Wikner <[email protected]>
x86/bugs: Do not use UNTRAIN_RET with IBPB on entry
Johannes Wikner <[email protected]>
x86/bugs: Skip RSB fill at VMEXIT
Johannes Wikner <[email protected]>
x86/entry: Have entry_ibpb() invalidate return predictions
Johannes Wikner <[email protected]>
x86/cpufeatures: Add a IBPB_NO_RET BUG flag
Jim Mattson <[email protected]>
x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET
Michael Mueller <[email protected]>
KVM: s390: Change virtual to physical address access in diag 0x258 handler
Nico Boehr <[email protected]>
KVM: s390: gaccess: Check if guest address is in memslot
Thomas Weißschuh <[email protected]>
s390/sclp_vt220: Convert newlines to CRLF instead of LFCR
Thomas Weißschuh <[email protected]>
s390/sclp: Deactivate sclp after all its users
Lu Baolu <[email protected]>
iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices
Wachowski, Karol <[email protected]>
drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE)
Lorenzo Stoakes <[email protected]>
maple_tree: correct tree corruption on spanning store
Jakub Kicinski <[email protected]>
devlink: bump the instance index directly when iterating
Jakub Kicinski <[email protected]>
devlink: drop the filter argument from devlinks_xa_find_get
Liu Shixin <[email protected]>
mm/swapfile: skip HugeTLB pages for unuse_vma
OGAWA Hirofumi <[email protected]>
fat: fix uninitialized variable
Nianyao Tang <[email protected]>
irqchip/gic-v3-its: Fix VSYNC referencing an unmapped VPE on GIC v4.1
Oleksij Rempel <[email protected]>
net: macb: Avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY
Mark Rutland <[email protected]>
arm64: probes: Fix simulate_ldr*_literal()
Mark Rutland <[email protected]>
arm64: probes: Remove broken LDR (literal) uprobe support
Jinjie Ruan <[email protected]>
posix-clock: Fix missing timespec64 check in pc_clock_settime()
Wei Fang <[email protected]>
net: enetc: add missing static descriptor and inline keyword
Wei Fang <[email protected]>
net: enetc: remove xdp_drops statistic from enetc_xdp_drop()
Jan Kara <[email protected]>
udf: Don't return bh from udf_expand_dir_adinicb()
Jan Kara <[email protected]>
udf: Handle error when expanding directory
Jan Kara <[email protected]>
udf: Remove old directory iteration code
Jan Kara <[email protected]>
udf: Convert udf_link() to new directory iteration code
Jan Kara <[email protected]>
udf: Convert udf_mkdir() to new directory iteration code
Jan Kara <[email protected]>
udf: Convert udf_add_nondir() to new directory iteration
Jan Kara <[email protected]>
udf: Implement adding of dir entries using new iteration code
Jan Kara <[email protected]>
udf: Convert udf_unlink() to new directory iteration code
Jan Kara <[email protected]>
udf: Convert udf_rmdir() to new directory iteration code
Jan Kara <[email protected]>
udf: Convert empty_dir() to new directory iteration code
Jan Kara <[email protected]>
udf: Convert udf_get_parent() to new directory iteration code
Jan Kara <[email protected]>
udf: Convert udf_lookup() to use new directory iteration code
Jan Kara <[email protected]>
udf: Convert udf_readdir() to new directory iteration
Jan Kara <[email protected]>
udf: Convert udf_rename() to new directory iteration code
Jan Kara <[email protected]>
udf: Provide function to mark entry as deleted using new directory iteration code
Jan Kara <[email protected]>
udf: Implement searching for directory entry using new iteration code
Jan Kara <[email protected]>
udf: Move udf_expand_dir_adinicb() to its callsite
Jan Kara <[email protected]>
udf: Convert udf_expand_dir_adinicb() to new directory iteration
Jan Kara <[email protected]>
udf: New directory iteration code
Matthieu Baerts (NGI0) <[email protected]>
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
Vasiliy Kovalev <[email protected]>
ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2
Namjae Jeon <[email protected]>
ksmbd: fix user-after-free from session log off
Roi Martin <[email protected]>
btrfs: fix uninitialized pointer free on read_alloc_one_name() error
Roi Martin <[email protected]>
btrfs: fix uninitialized pointer free in add_inode_ref()
-------------
Diffstat:
Makefile | 4 +- arch/arm64/kernel/probes/decode-insn.c | 16 +- arch/arm64/kernel/probes/simulate-insn.c | 18 +- arch/s390/kvm/diag.c | 2 +- arch/s390/kvm/gaccess.c | 4 + arch/s390/kvm/gaccess.h | 14 +- arch/x86/entry/entry.S | 5 + arch/x86/entry/entry_32.S | 6 +- arch/x86/include/asm/cpufeatures.h | 4 +- arch/x86/kernel/apic/apic.c | 14 +- arch/x86/kernel/cpu/bugs.c | 32 + arch/x86/kernel/cpu/common.c | 3 + arch/x86/kernel/cpu/resctrl/core.c | 4 +- block/blk-rq-qos.c | 2 +- drivers/bluetooth/btusb.c | 13 +- drivers/crypto/vmx/Makefile | 12 +- drivers/crypto/vmx/ppc-xlate.pl | 10 +- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 6 +- drivers/gpu/drm/drm_gem_shmem_helper.c | 3 + drivers/gpu/drm/radeon/radeon_encoders.c | 2 +- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 1 + drivers/iio/adc/Kconfig | 4 + drivers/iio/amplifiers/Kconfig | 1 + .../iio/common/hid-sensors/hid-sensor-trigger.c | 2 +- drivers/iio/dac/Kconfig | 7 + drivers/iio/light/opt3001.c | 4 + drivers/iio/light/veml6030.c | 5 +- drivers/iio/proximity/Kconfig | 2 + drivers/iommu/intel/iommu.c | 4 +- drivers/irqchip/irq-gic-v3-its.c | 26 +- drivers/irqchip/irq-sifive-plic.c | 21 +- drivers/net/ethernet/cadence/macb_main.c | 14 +- drivers/net/ethernet/freescale/enetc/enetc.c | 2 +- drivers/parport/procfs.c | 22 +- drivers/pinctrl/pinctrl-apple-gpio.c | 3 + drivers/pinctrl/pinctrl-ocelot.c | 8 +- drivers/s390/char/sclp.c | 3 +- drivers/s390/char/sclp_vt220.c | 4 +- drivers/tty/n_gsm.c | 2 + drivers/ufs/core/ufshcd.c | 4 +- drivers/usb/dwc3/gadget.c | 10 +- drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci.h | 2 +- drivers/usb/serial/option.c | 8 + fs/btrfs/tree-log.c | 6 +- fs/fat/namei_vfat.c | 2 +- fs/nilfs2/dir.c | 50 +- fs/nilfs2/namei.c | 39 +- fs/nilfs2/nilfs.h | 2 +- fs/smb/server/mgmt/user_session.c | 26 +- fs/smb/server/mgmt/user_session.h | 4 + fs/smb/server/server.c | 2 + fs/smb/server/smb2pdu.c | 8 +- fs/udf/dir.c | 148 +-- fs/udf/directory.c | 594 ++++++++--- fs/udf/inode.c | 90 -- fs/udf/namei.c | 1037 +++++++------------- fs/udf/udfdecl.h | 45 +- include/linux/fsl/enetc_mdio.h | 3 +- include/linux/irqchip/arm-gic-v4.h | 4 +- io_uring/io_uring.h | 9 +- kernel/time/posix-clock.c | 3 + lib/maple_tree.c | 12 +- mm/swapfile.c | 2 +- net/bluetooth/af_bluetooth.c | 3 + net/bluetooth/iso.c | 6 +- net/devlink/leftover.c | 40 +- net/ipv4/tcp_output.c | 4 +- net/mptcp/mib.c | 1 + net/mptcp/mib.h | 1 + net/mptcp/pm_netlink.c | 3 +- net/mptcp/protocol.h | 1 + net/mptcp/subflow.c | 11 + sound/pci/hda/patch_conexant.c | 19 + 75 files changed, 1237 insertions(+), 1275 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/91 btrfs: fix uninitialized pointer free in add_inode_ref()
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roi Martin <[email protected]>
commit 66691c6e2f18d2aa4b22ffb624b9bdc97e9979e4 upstream.
The add_inode_ref() function does not initialize the "name" struct when it is declared. If any of the following calls to "read_one_inode() returns NULL,
dir = read_one_inode(root, parent_objectid);
if (!dir) {
ret = -ENOENT;
goto out;
}
inode = read_one_inode(root, inode_objectid);
if (!inode) {
ret = -EIO;
goto out;
}then "name.name" would be freed on "out" before being initialized.
out:
... kfree(name.name);
This issue was reported by Coverity with CID 1526744.
--- fs/btrfs/tree-log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/tree-log.c +1 -1
@@ -1372,7 +1372,7 @@ static noinline int add_inode_ref(structstruct inode *inode =NULL ;unsigned long ref_ptr;unsigned long ref_end; -struct fscrypt_str name; +struct fscrypt_str name = {0 };int ret;int log_ref_ver =0 ;u64 parent_objectid;
Greg Kroah-Hartman
maintainerPATCH 2/91 btrfs: fix uninitialized pointer free on read_alloc_one_name() error
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roi Martin <[email protected]>
commit 2ab5e243c2266c841e0f6904fad1514b18eaf510 upstream.
The function read_alloc_one_name() does not initialize the name field of the passed fscrypt_str struct if kmalloc fails to allocate the corresponding buffer. Thus, it is not guaranteed that fscrypt_str.name is initialized when freeing it.
This is a follow-up to the linked patch that fixes the remaining instances of the bug introduced by commit e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs").
--- fs/btrfs/tree-log.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
fs/btrfs/tree-log.c +2 -2
@@ -1844,7 +1844,7 @@ static noinline int replay_one_name(strustruct btrfs_dir_item *di, struct btrfs_key *key) { - struct fscrypt_str name; + struct fscrypt_str name = { 0 };struct btrfs_dir_item *dir_dst_di;struct btrfs_dir_item *index_dst_di;bool dir_dst_matches = false;
@@ -2124,7 +2124,7 @@ static noinline int check_item_in_log(ststruct extent_buffer *eb;int slot;struct btrfs_dir_item *di; -struct fscrypt_str name; +struct fscrypt_str name = {0 };struct inode *inode =NULL ;struct btrfs_key location;
Greg Kroah-Hartman
maintainerPATCH 3/91 ksmbd: fix user-after-free from session log off
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Namjae Jeon <[email protected]>
commit 7aa8804c0b67b3cb263a472d17f2cb50d7f1a930 upstream.
There is racy issue between smb2 session log off and smb2 session setup. It will cause user-after-free from session log off.
This add session_lock when setting SMB2_SESSION_EXPIRED and referece count to session struct not to free session while it is being used.
--- fs/smb/server/mgmt/user_session.c | 26 +++++++++++++++++++++----- fs/smb/server/mgmt/user_session.h | 4 ++++ fs/smb/server/server.c | 2 ++ fs/smb/server/smb2pdu.c | 8 +++++++- 4 files changed, 34 insertions(+), 6 deletions(-)
fs/smb/server/mgmt/user_session.c +21 -5
@@ -176,9 +176,10 @@ static void ksmbd_expire_session(structdown_write (&conn->session_lock);xa_for_each (&conn->sessions, id, sess) { -if (sess->state !=SMB2_SESSION_VALID || -time_after (jiffies, - sess->last_active +SMB2_SESSION_TIMEOUT )) { +if (atomic_read (&sess->refcnt) ==0 && + (sess->state !=SMB2_SESSION_VALID || +time_after (jiffies, + sess->last_active +SMB2_SESSION_TIMEOUT ))) {xa_erase (&conn->sessions, sess->id);hash_del (&sess->hlist);ksmbd_session_destroy (sess);
@@ -268,8 +269,6 @@ struct ksmbd_session *ksmbd_session_lookdown_read (&sessions_table_lock); sess =__session_lookup (id); -if (sess) - sess->last_active = jiffies;up_read (&sessions_table_lock);return sess;
@@ -288,6 +287,22 @@ struct ksmbd_session *ksmbd_session_lookreturn sess; } +void ksmbd_user_session_get (struct ksmbd_session *sess) +{ +atomic_inc (&sess->refcnt); +} + +void ksmbd_user_session_put (struct ksmbd_session *sess) +{ +if (!sess) +return ; + +if (atomic_read (&sess->refcnt) <=0 ) +WARN_ON (1 ); +else +atomic_dec (&sess->refcnt); +} +struct preauth_session *ksmbd_preauth_session_alloc (struct ksmbd_conn *conn,u64 sess_id) {
@@ -356,6 +371,7 @@ static struct ksmbd_session *__session_cxa_init (&sess->rpc_handle_list); sess->sequence_number =1 ;rwlock_init (&sess->tree_conns_lock); +atomic_set (&sess->refcnt,1 ); ret =__init_smb2_session (sess);if (ret)
fs/smb/server/mgmt/user_session.h +4 -0
@@ -61,6 +61,8 @@ struct ksmbd_session {struct ksmbd_file_table file_table;unsigned long last_active;rwlock_t tree_conns_lock; + +atomic_t refcnt; };static inline int test_session_flag (struct ksmbd_session *sess,int bit)
@@ -101,4 +103,6 @@ void ksmbd_release_tree_conn_id(struct kint ksmbd_session_rpc_open (struct ksmbd_session *sess,char *rpc_name);void ksmbd_session_rpc_close (struct ksmbd_session *sess,int id);int ksmbd_session_rpc_method (struct ksmbd_session *sess,int id); +void ksmbd_user_session_get (struct ksmbd_session *sess); +void ksmbd_user_session_put (struct ksmbd_session *sess);#endif /* __USER_SESSION_MANAGEMENT_H__ */
fs/smb/server/server.c +2 -0
@@ -238,6 +238,8 @@ static void __handle_ksmbd_work(struct k }while (is_chained == true); send: +if (work->sess) +ksmbd_user_session_put (work->sess);if (work->tcon)ksmbd_tree_connect_put (work->tcon);smb3_preauth_hash_rsp (work);
fs/smb/server/smb2pdu.c +7 -1
@@ -604,8 +604,10 @@ int smb2_check_user_session(struct ksmbd/* Check for validity of user session */ work->sess =ksmbd_session_lookup_all (conn, sess_id); -if (work->sess) +if (work->sess) { +ksmbd_user_session_get (work->sess);return 1 ; + }ksmbd_debug (SMB ,"Invalid user session, Uid %llu\n" , sess_id);return -ENOENT ; }
@@ -1759,6 +1761,7 @@ int smb2_sess_setup(struct ksmbd_work *w } conn->binding = true; +ksmbd_user_session_get (sess); }else if ((conn->dialect <SMB30_PROT_ID || server_conf.flags &KSMBD_GLOBAL_FLAG_SMB3_MULTICHANNEL ) && (req->Flags &SMB2_SESSION_REQ_FLAG_BINDING )) {
@@ -1785,6 +1788,7 @@ int smb2_sess_setup(struct ksmbd_work *w } conn->binding = false; +ksmbd_user_session_get (sess); } work->sess = sess;
@@ -2240,7 +2244,9 @@ int smb2_session_logoff(struct ksmbd_wor }ksmbd_destroy_file_table (&sess->file_table); +down_write (&conn->session_lock); sess->state =SMB2_SESSION_EXPIRED ; +up_write (&conn->session_lock);ksmbd_free_user (sess->user); sess->user =NULL ;
Greg Kroah-Hartman
maintainerPATCH 4/91 ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasiliy Kovalev <[email protected]>
commit 9988844c457f6f17fb2e75aa000b6c3b1b673bb9 upstream.
There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on.
However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d:
working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP
This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem.
--- sound/pci/hda/patch_conexant.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
sound/pci/hda/patch_conexant.c +19 -0
@@ -307,6 +307,7 @@ enum {CXT_FIXUP_HP_SPECTRE ,CXT_FIXUP_HP_GATE_MIC ,CXT_FIXUP_MUTE_LED_GPIO , +CXT_FIXUP_HP_ELITEONE_OUT_DIS ,CXT_FIXUP_HP_ZBOOK_MUTE_LED ,CXT_FIXUP_HEADSET_MIC , CXT_FIXUP_HP_MIC_NO_PRESENCE,
@@ -324,6 +325,19 @@ static void cxt_fixup_stereo_dmic(struct spec->gen.inv_dmic_split =1 ; } +/* fix widget control pin settings */ +static void cxt_fixup_update_pinctl (struct hda_codec *codec, +const struct hda_fixup *fix,int action) +{ +if (action ==HDA_FIXUP_ACT_PROBE ) { +/* Unset OUT_EN for this Node pin, leaving only HP_EN. +* This is the value stored in the codec register after +* the correct initialization of the previous windows boot. +*/ +snd_hda_set_pin_ctl (codec,0x1d ,AC_PINCTL_HP_EN ); + } +} +static void cxt5066_increase_mic_boost (struct hda_codec *codec,const struct hda_fixup *fix,int action) {
@@ -975,6 +989,10 @@ static const struct hda_fixup cxt_fixups .type = HDA_FIXUP_FUNC, .v.func = cxt_fixup_mute_led_gpio, }, + [CXT_FIXUP_HP_ELITEONE_OUT_DIS] = { + .type = HDA_FIXUP_FUNC, + .v.func = cxt_fixup_update_pinctl, + }, [CXT_FIXUP_HP_ZBOOK_MUTE_LED] = { .type = HDA_FIXUP_FUNC, .v.func = cxt_fixup_hp_zbook_mute_led,
@@ -1065,6 +1083,7 @@ static const struct snd_pci_quirk cxt506SND_PCI_QUIRK (0x103c ,0x83b2 ,"HP EliteBook 840 G5" ,CXT_FIXUP_HP_DOCK ),SND_PCI_QUIRK (0x103c ,0x83b3 ,"HP EliteBook 830 G5" ,CXT_FIXUP_HP_DOCK ),SND_PCI_QUIRK (0x103c ,0x83d3 ,"HP ProBook 640 G4" ,CXT_FIXUP_HP_DOCK ), +SND_PCI_QUIRK (0x103c ,0x83e5 ,"HP EliteOne 1000 G2" ,CXT_FIXUP_HP_ELITEONE_OUT_DIS ),SND_PCI_QUIRK (0x103c ,0x8402 ,"HP ProBook 645 G4" ,CXT_FIXUP_MUTE_LED_GPIO ),SND_PCI_QUIRK (0x103c ,0x8427 ,"HP ZBook Studio G5" ,CXT_FIXUP_HP_ZBOOK_MUTE_LED ), SND_PCI_QUIRK(0x103c, 0x844f, "HP ZBook Studio G5", CXT_FIXUP_HP_ZBOOK_MUTE_LED),
Greg Kroah-Hartman
maintainerPATCH 5/91 mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) <[email protected]>
commit 7decd1f5904a489d3ccdcf131972f94645681689 upstream.
Syzkaller reported this splat:
==================================================================
BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662 CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7fe4579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5387: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803 subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956 __tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline] tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167 mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764 __mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592 mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642 mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline] mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943 mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777 process_one_work+0x958/0x1b30 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 113: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:2342 [inline] slab_free mm/slub.c:4579 [inline] kfree+0x14f/0x4b0 mm/slub.c:4727 kvfree+0x47/0x50 mm/util.c:701 kvfree_rcu_list+0xf5/0x2c0 kernel/rcu/tree.c:3423 kvfree_rcu_drain_ready kernel/rcu/tree.c:3563 [inline] kfree_rcu_monitor+0x503/0x8b0 kernel/rcu/tree.c:3632 kfree_rcu_shrink_scan+0x245/0x3a0 kernel/rcu/tree.c:3966 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab+0x32b/0x12a0 mm/shrinker.c:662 shrink_one+0x47e/0x7b0 mm/vmscan.c:4818 shrink_many mm/vmscan.c:4879 [inline] lru_gen_shrink_node mm/vmscan.c:4957 [inline] shrink_node+0x2452/0x39d0 mm/vmscan.c:5937 kswapd_shrink_node mm/vmscan.c:6765 [inline] balance_pgdat+0xc19/0x18f0 mm/vmscan.c:6957 kswapd+0x5ea/0xbf0 mm/vmscan.c:7226 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Last potentially related work creation: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xba/0xd0 mm/kasan/generic.c:541 kvfree_call_rcu+0x74/0xbe0 kernel/rcu/tree.c:3810 subflow_ulp_release+0x2ae/0x350 net/mptcp/subflow.c:2009 tcp_cleanup_ulp+0x7c/0x130 net/ipv4/tcp_ulp.c:124 tcp_v4_destroy_sock+0x1c5/0x6a0 net/ipv4/tcp_ipv4.c:2541 inet_csk_destroy_sock+0x1a3/0x440 net/ipv4/inet_connection_sock.c:1293 tcp_done+0x252/0x350 net/ipv4/tcp.c:4870 tcp_rcv_state_process+0x379b/0x4f30 net/ipv4/tcp_input.c:6933 tcp_v4_do_rcv+0x1ad/0xa90 net/ipv4/tcp_ipv4.c:1938 sk_backlog_rcv include/net/sock.h:1115 [inline] __release_sock+0x31b/0x400 net/core/sock.c:3072 __tcp_close+0x4f3/0xff0 net/ipv4/tcp.c:3142 __mptcp_close_ssk+0x331/0x14d0 net/mptcp/protocol.c:2489 mptcp_close_ssk net/mptcp/protocol.c:2543 [inline] mptcp_close_ssk+0x150/0x220 net/mptcp/protocol.c:2526 mptcp_pm_nl_rm_addr_or_subflow+0x2be/0xcc0 net/mptcp/pm_netlink.c:878 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e The buggy address belongs to the object at ffff8880569ac800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 88 bytes inside of freed 512-byte region [ffff8880569ac800, ffff8880569aca00) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x569ac head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x4fff00000000040(head|node=1|zone=1|lastcpupid=0x7ff) page_type: f5(slab) raw: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122 raw: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000 head: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122 head: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000 head: 04fff00000000002 ffffea00015a6b01 ffffffffffffffff 0000000000000000 head: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 10238, tgid 10238 (kworker/u32:6), ts 597403252405, free_ts 597177952947 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x2d1/0x350 mm/page_alloc.c:1537 prep_new_page mm/page_alloc.c:1545 [inline] get_page_from_freelist+0x101e/0x3070 mm/page_alloc.c:3457 __alloc_pages_noprof+0x223/0x25a0 mm/page_alloc.c:4733 alloc_pages_mpol_noprof+0x2c9/0x610 mm/mempolicy.c:2265 alloc_slab_page mm/slub.c:2412 [inline] allocate_slab mm/slub.c:2578 [inline] new_slab+0x2ba/0x3f0 mm/slub.c:2631 ___slab_alloc+0xd1d/0x16f0 mm/slub.c:3818 __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908 __slab_alloc_node mm/slub.c:3961 [inline] slab_alloc_node mm/slub.c:4122 [inline] __kmalloc_cache_noprof+0x2c5/0x310 mm/slub.c:4290 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] mld_add_delrec net/ipv6/mcast.c:743 [inline] igmp6_leave_group net/ipv6/mcast.c:2625 [inline] igmp6_group_dropped+0x4ab/0xe40 net/ipv6/mcast.c:723 __ipv6_dev_mc_dec+0x281/0x360 net/ipv6/mcast.c:979 addrconf_leave_solict net/ipv6/addrconf.c:2253 [inline] __ipv6_ifa_notify+0x3f6/0xc30 net/ipv6/addrconf.c:6283 addrconf_ifdown.isra.0+0xef9/0x1a20 net/ipv6/addrconf.c:3982 addrconf_notify+0x220/0x19c0 net/ipv6/addrconf.c:3781 notifier_call_chain+0xb9/0x410 kernel/notifier.c:93 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1996 call_netdevice_notifiers_extack net/core/dev.c:2034 [inline] call_netdevice_notifiers net/core/dev.c:2048 [inline] dev_close_many+0x333/0x6a0 net/core/dev.c:1589 page last free pid 13136 tgid 13136 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1108 [inline] free_unref_page+0x5f4/0xdc0 mm/page_alloc.c:2638 stack_depot_save_flags+0x2da/0x900 lib/stackdepot.c:666 kasan_save_stack+0x42/0x60 mm/kasan/common.c:48 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x89/0x90 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4085 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_noprof+0x121/0x2f0 mm/slub.c:4141 skb_clone+0x190/0x3f0 net/core/skbuff.c:2084 do_one_broadcast net/netlink/af_netlink.c:1462 [inline] netlink_broadcast_filtered+0xb11/0xef0 net/netlink/af_netlink.c:1540 netlink_broadcast+0x39/0x50 net/netlink/af_netlink.c:1564 uevent_net_broadcast_untagged lib/kobject_uevent.c:331 [inline] kobject_uevent_net_broadcast lib/kobject_uevent.c:410 [inline] kobject_uevent_env+0xacd/0x1670 lib/kobject_uevent.c:608 device_del+0x623/0x9f0 drivers/base/core.c:3882 snd_card_disconnect.part.0+0x58a/0x7c0 sound/core/init.c:546 snd_card_disconnect+0x1f/0x30 sound/core/init.c:495 snd_usx2y_disconnect+0xe9/0x1f0 sound/usb/usx2y/usbusx2y.c:417 usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461 device_remove drivers/base/dd.c:569 [inline] device_remove+0x122/0x170 drivers/base/dd.c:561
That's because 'subflow' is used just after 'mptcp_close_ssk(subflow)', which will initiate the release of its memory. Even if it is very likely the release and the re-utilisation will be done later on, it is of course better to avoid any issues and read the content of 'subflow' before closing it.
--- net/mptcp/pm_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/mptcp/pm_netlink.c +1 -1
@@ -877,12 +877,12 @@ static void mptcp_pm_nl_rm_addr_or_subfl i, rm_id, id, remote_id, msk->mpc_endpoint_id);spin_unlock_bh (&msk->pm.lock);mptcp_subflow_shutdown (sk, ssk, how); + removed |= subflow->request_join;/* the following takes care of updating the subflows counter */ mptcp_close_ssk (sk, ssk, subflow);spin_lock_bh (&msk->pm.lock); - removed |= subflow->request_join;if (rm_type ==MPTCP_MIB_RMSUBFLOW )__MPTCP_INC_STATS (sock_net (sk), rm_type); }
Greg Kroah-Hartman
maintainerPATCH 6/91 udf: New directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit d16076d9b684b7c8d3ccbe9c33d5ea9fe8fcca09 ]
Add new support code for iterating directory entries. The code is also more carefully verifying validity of on-disk directory entries to avoid crashes on malicious media.
--- fs/udf/directory.c | 395 +++++++++++++++++++++++++++++++++++++++++++++++++++++ fs/udf/udfdecl.h | 23 +++ 2 files changed, 418 insertions(+)
fs/udf/directory.c +395 -0
@@ -17,6 +17,401 @@#include <linux/fs.h> #include <linux/string.h> #include <linux/bio.h> +#include <linux/crc-itu-t.h> +#include <linux/iversion.h> + +static int udf_verify_fi (struct udf_fileident_iter *iter) +{ +unsigned int len; + +if (iter->fi.descTag.tagIdent !=cpu_to_le16 (TAG_IDENT_FID )) { +udf_err (iter->dir->i_sb, +"directory (ino %lu) has entry at pos %llu with incorrect tag %x\n" , + iter->dir->i_ino, (unsigned long long )iter->pos, +le16_to_cpu (iter->fi.descTag.tagIdent)); +return -EFSCORRUPTED ; + } + len =udf_dir_entry_len (&iter->fi); +if (le16_to_cpu (iter->fi.lengthOfImpUse) &3 ) { +udf_err (iter->dir->i_sb, +"directory (ino %lu) has entry at pos %llu with unaligned lenght of impUse field\n" , + iter->dir->i_ino, (unsigned long long )iter->pos); +return -EFSCORRUPTED ; + } +/* +* This is in fact allowed by the spec due to long impUse field but +* we don't support it. If there is real media with this large impUse +* field, support can be added. +*/ +if (len >1 << iter->dir->i_blkbits) { +udf_err (iter->dir->i_sb, +"directory (ino %lu) has too big (%u) entry at pos %llu\n" , + iter->dir->i_ino, len, (unsigned long long )iter->pos); +return -EFSCORRUPTED ; + } +if (iter->pos + len > iter->dir->i_size) { +udf_err (iter->dir->i_sb, +"directory (ino %lu) has entry past directory size at pos %llu\n" , + iter->dir->i_ino, (unsigned long long )iter->pos); +return -EFSCORRUPTED ; + } +if (udf_dir_entry_len (&iter->fi) != +sizeof (struct tag ) +le16_to_cpu (iter->fi.descTag.descCRCLength)) { +udf_err (iter->dir->i_sb, +"directory (ino %lu) has entry where CRC length (%u) does not match entry length (%u)\n" , + iter->dir->i_ino, + (unsigned )le16_to_cpu (iter->fi.descTag.descCRCLength), + (unsigned )(udf_dir_entry_len (&iter->fi) - +sizeof (struct tag ))); +return -EFSCORRUPTED ; + } +return 0 ; +} + +static int udf_copy_fi (struct udf_fileident_iter *iter) +{ +struct udf_inode_info *iinfo =UDF_I (iter->dir); +int blksize =1 << iter->dir->i_blkbits; +int err, off, len, nameoff; + +/* Skip copying when we are at EOF */ +if (iter->pos >= iter->dir->i_size) { + iter->name =NULL ; +return 0 ; + } +if (iter->dir->i_size < iter->pos +sizeof (struct fileIdentDesc )) { +udf_err (iter->dir->i_sb, +"directory (ino %lu) has entry straddling EOF\n" , + iter->dir->i_ino); +return -EFSCORRUPTED ; + } +if (iinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB ) { +memcpy (&iter->fi, iinfo->i_data + iinfo->i_lenEAttr + iter->pos, +sizeof (struct fileIdentDesc )); + err =udf_verify_fi (iter); +if (err <0 ) +return err; + iter->name = iinfo->i_data + iinfo->i_lenEAttr + iter->pos + +sizeof (struct fileIdentDesc ) + +le16_to_cpu (iter->fi.lengthOfImpUse); +return 0 ; + } + + off = iter->pos & (blksize -1 ); + len =min_t (int,sizeof (struct fileIdentDesc ), blksize - off); +memcpy (&iter->fi, iter->bh[0 ]->b_data + off, len); +if (len <sizeof (struct fileIdentDesc )) +memcpy ((char *)(&iter->fi) + len, iter->bh[1 ]->b_data, +sizeof (struct fileIdentDesc ) - len); + err =udf_verify_fi (iter); +if (err <0 ) +return err; + +/* Handle directory entry name */ + nameoff = off +sizeof (struct fileIdentDesc ) + +le16_to_cpu (iter->fi.lengthOfImpUse); +if (off +udf_dir_entry_len (&iter->fi) <= blksize) { + iter->name = iter->bh[0 ]->b_data + nameoff; + }else if (nameoff >= blksize) { + iter->name = iter->bh[1 ]->b_data + (nameoff - blksize); + }else { + iter->name = iter->namebuf; + len = blksize - nameoff; +memcpy (iter->name, iter->bh[0 ]->b_data + nameoff, len); +memcpy (iter->name + len, iter->bh[1 ]->b_data, + iter->fi.lengthFileIdent - len); + } +return 0 ; +} + +/* Readahead 8k once we are at 8k boundary */ +static void udf_readahead_dir (struct udf_fileident_iter *iter) +{ +unsigned int ralen =16 >> (iter->dir->i_blkbits -9 ); +struct buffer_head *tmp, *bha[16 ]; +int i, num; +udf_pblk_t blk; + +if (iter->loffset & (ralen -1 )) +return ; + +if (iter->loffset + ralen > (iter->elen >> iter->dir->i_blkbits)) + ralen = (iter->elen >> iter->dir->i_blkbits) - iter->loffset; + num =0 ; +for (i =0 ; i < ralen; i++) { + blk =udf_get_lb_pblock (iter->dir->i_sb, &iter->eloc, + iter->loffset + i); + tmp =udf_tgetblk (iter->dir->i_sb, blk); +if (tmp && !buffer_uptodate (tmp) && !buffer_locked (tmp)) + bha[num++] = tmp; +else +brelse (tmp); + } +if (num) { +bh_readahead_batch (num, bha,REQ_RAHEAD ); +for (i =0 ; i < num; i++) +brelse (bha[i]); + } +} + +static struct buffer_head *udf_fiiter_bread_blk (struct udf_fileident_iter *iter) +{ +udf_pblk_t blk; + +udf_readahead_dir (iter); + blk =udf_get_lb_pblock (iter->dir->i_sb, &iter->eloc, iter->loffset); +return udf_tread (iter->dir->i_sb, blk); +} + +/* +* Updates loffset to point to next directory block; eloc, elen & epos are +* updated if we need to traverse to the next extent as well. +*/ +static int udf_fiiter_advance_blk (struct udf_fileident_iter *iter) +{ + iter->loffset++; +if (iter->loffset < iter->elen >> iter->dir->i_blkbits) +return 0 ; + + iter->loffset =0 ; +if (udf_next_aext (iter->dir, &iter->epos, &iter->eloc, &iter->elen,1 ) + != (EXT_RECORDED_ALLOCATED >>30 )) { +if (iter->pos == iter->dir->i_size) { + iter->elen =0 ; +return 0 ; + } +udf_err (iter->dir->i_sb, +"extent after position %llu not allocated in directory (ino %lu)\n" , + (unsigned long long )iter->pos, iter->dir->i_ino); +return -EFSCORRUPTED ; + } +return 0 ; +} + +static int udf_fiiter_load_bhs (struct udf_fileident_iter *iter) +{ +int blksize =1 << iter->dir->i_blkbits; +int off = iter->pos & (blksize -1 ); +int err; +struct fileIdentDesc *fi; + +/* Is there any further extent we can map from? */ +if (!iter->bh[0 ] && iter->elen) { + iter->bh[0 ] =udf_fiiter_bread_blk (iter); +if (!iter->bh[0 ]) { + err = -ENOMEM ; + goto out_brelse; + } +if (!buffer_uptodate (iter->bh[0 ])) { + err = -EIO ; + goto out_brelse; + } + } +/* There's no next block so we are done */ +if (iter->pos >= iter->dir->i_size) +return 0 ; +/* Need to fetch next block as well? */ +if (off +sizeof (struct fileIdentDesc ) > blksize) + goto fetch_next; + fi = (struct fileIdentDesc *)(iter->bh[0 ]->b_data + off); +/* Need to fetch next block to get name? */ +if (off +udf_dir_entry_len (fi) > blksize) { +fetch_next: +udf_fiiter_advance_blk (iter); + iter->bh[1 ] =udf_fiiter_bread_blk (iter); +if (!iter->bh[1 ]) { + err = -ENOMEM ; + goto out_brelse; + } +if (!buffer_uptodate (iter->bh[1 ])) { + err = -EIO ; + goto out_brelse; + } + } +return 0 ; +out_brelse: +brelse (iter->bh[0 ]); +brelse (iter->bh[1 ]); + iter->bh[0 ] = iter->bh[1 ] =NULL ; +return err; +} + +int udf_fiiter_init (struct udf_fileident_iter *iter,struct inode *dir, +loff_t pos) +{ +struct udf_inode_info *iinfo =UDF_I (dir); +int err =0 ; + + iter->dir = dir; + iter->bh[0 ] = iter->bh[1 ] =NULL ; + iter->pos = pos; + iter->elen =0 ; + iter->epos.bh =NULL ; + iter->name =NULL ; + +if (iinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB ) +return udf_copy_fi (iter); + +if (inode_bmap (dir, iter->pos >> dir->i_blkbits, &iter->epos, + &iter->eloc, &iter->elen, &iter->loffset) != + (EXT_RECORDED_ALLOCATED >>30 )) { +if (pos == dir->i_size) +return 0 ; +udf_err (dir->i_sb, +"position %llu not allocated in directory (ino %lu)\n" , + (unsigned long long )pos, dir->i_ino); +return -EFSCORRUPTED ; + } + err =udf_fiiter_load_bhs (iter); +if (err <0 ) +return err; + err =udf_copy_fi (iter); +if (err <0 ) { +udf_fiiter_release (iter); +return err; + } +return 0 ; +} + +int udf_fiiter_advance (struct udf_fileident_iter *iter) +{ +unsigned int oldoff, len; +int blksize =1 << iter->dir->i_blkbits; +int err; + + oldoff = iter->pos & (blksize -1 ); + len =udf_dir_entry_len (&iter->fi); + iter->pos += len; +if (UDF_I (iter->dir)->i_alloc_type !=ICBTAG_FLAG_AD_IN_ICB ) { +if (oldoff + len >= blksize) { +brelse (iter->bh[0 ]); + iter->bh[0 ] =NULL ; +/* Next block already loaded? */ +if (iter->bh[1 ]) { + iter->bh[0 ] = iter->bh[1 ]; + iter->bh[1 ] =NULL ; + }else { +udf_fiiter_advance_blk (iter); + } + } + err =udf_fiiter_load_bhs (iter); +if (err <0 ) +return err; + } +return udf_copy_fi (iter); +} + +void udf_fiiter_release (struct udf_fileident_iter *iter) +{ + iter->dir =NULL ; +brelse (iter->bh[0 ]); +brelse (iter->bh[1 ]); + iter->bh[0 ] = iter->bh[1 ] =NULL ; +} + +static void udf_copy_to_bufs (void *buf1,int len1,void *buf2,int len2, +int off,void *src,int len) +{ +int copy; + +if (off >= len1) { + off -= len1; + }else { + copy =min (off + len, len1) - off; +memcpy (buf1 + off, src, copy); + src += copy; + len -= copy; + off =0 ; + } +if (len >0 ) { +if (WARN_ON_ONCE (off + len > len2 || !buf2)) +return ; +memcpy (buf2 + off, src, len); + } +} + +static uint16_t udf_crc_fi_bufs (void *buf1,int len1,void *buf2,int len2, +int off,int len) +{ +int copy; +uint16_t crc =0 ; + +if (off >= len1) { + off -= len1; + }else { + copy =min (off + len, len1) - off; + crc =crc_itu_t (crc, buf1 + off, copy); + len -= copy; + off =0 ; + } +if (len >0 ) { +if (WARN_ON_ONCE (off + len > len2 || !buf2)) +return 0 ; + crc =crc_itu_t (crc, buf2 + off, len); + } +return crc; +} + +static void udf_copy_fi_to_bufs (char *buf1,int len1,char *buf2,int len2, +int off,struct fileIdentDesc *fi, +uint8_t *impuse,uint8_t *name) +{ +uint16_t crc; +int fioff = off; +int crcoff = off +sizeof (struct tag ); +unsigned int crclen =udf_dir_entry_len (fi) -sizeof (struct tag ); + +udf_copy_to_bufs (buf1, len1, buf2, len2, off, fi, +sizeof (struct fileIdentDesc )); + off +=sizeof (struct fileIdentDesc ); +if (impuse) +udf_copy_to_bufs (buf1, len1, buf2, len2, off, impuse, +le16_to_cpu (fi->lengthOfImpUse)); + off +=le16_to_cpu (fi->lengthOfImpUse); +if (name) +udf_copy_to_bufs (buf1, len1, buf2, len2, off, name, + fi->lengthFileIdent); + + crc =udf_crc_fi_bufs (buf1, len1, buf2, len2, crcoff, crclen); + fi->descTag.descCRC =cpu_to_le16 (crc); + fi->descTag.descCRCLength =cpu_to_le16 (crclen); + fi->descTag.tagChecksum =udf_tag_checksum (&fi->descTag); + +udf_copy_to_bufs (buf1, len1, buf2, len2, fioff, fi,sizeof (struct tag )); +} + +void udf_fiiter_write_fi (struct udf_fileident_iter *iter,uint8_t *impuse) +{ +struct udf_inode_info *iinfo =UDF_I (iter->dir); +void *buf1, *buf2 =NULL ; +int len1, len2 =0 , off; +int blksize =1 << iter->dir->i_blkbits; + + off = iter->pos & (blksize -1 ); +if (iinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB ) { + buf1 = iinfo->i_data + iinfo->i_lenEAttr; + len1 = iter->dir->i_size; + }else { + buf1 = iter->bh[0 ]->b_data; + len1 = blksize; +if (iter->bh[1 ]) { + buf2 = iter->bh[1 ]->b_data; + len2 = blksize; + } + } + +udf_copy_fi_to_bufs (buf1, len1, buf2, len2, off, &iter->fi, impuse, + iter->name == iter->namebuf ? iter->name :NULL ); + +if (iinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB ) { +mark_inode_dirty (iter->dir); + }else { +mark_buffer_dirty_inode (iter->bh[0 ], iter->dir); +if (iter->bh[1 ]) +mark_buffer_dirty_inode (iter->bh[1 ], iter->dir); + } +inode_inc_iversion (iter->dir); +} struct fileIdentDesc *udf_fileident_read(struct inode *dir, loff_t *nf_pos, struct udf_fileident_bh *fibh,
fs/udf/udfdecl.h +23 -0
@@ -86,6 +86,24 @@ extern const struct address_space_operatextern const struct address_space_operations udf_adinicb_aops;extern const struct address_space_operations udf_symlink_aops; +struct udf_fileident_iter { +struct inode *dir;/* Directory we are working with */ +loff_t pos;/* Logical position in a dir */ +struct buffer_head *bh[2 ];/* Buffer containing 'pos' and possibly +* next buffer if entry straddles +* blocks */ +struct kernel_lb_addr eloc;/* Start of extent containing 'pos' */ +uint32_t elen;/* Length of extent containing 'pos' */ +sector_t loffset;/* Block offset of 'pos' within above +* extent */ +struct extent_position epos;/* Position after the above extent */ +struct fileIdentDesc fi;/* Copied directory entry */ +uint8_t *name;/* Pointer to entry name */ +uint8_t namebuf[UDF_NAME_LEN_CS0 ];/* Storage for entry name in case +* the name is split between two blocks +*/ +}; +struct udf_fileident_bh {struct buffer_head *sbh;struct buffer_head *ebh;
@@ -243,6 +261,11 @@ extern udf_pblk_t udf_new_block(struct s uint16_t partition, uint32_t goal, int *err);/* directory.c */ +int udf_fiiter_init (struct udf_fileident_iter *iter,struct inode *dir, +loff_t pos); +int udf_fiiter_advance (struct udf_fileident_iter *iter); +void udf_fiiter_release (struct udf_fileident_iter *iter); +void udf_fiiter_write_fi (struct udf_fileident_iter *iter,uint8_t *impuse); extern struct fileIdentDesc *udf_fileident_read(struct inode *, loff_t *, struct udf_fileident_bh *, struct fileIdentDesc *,
Greg Kroah-Hartman
maintainerPATCH 7/91 udf: Convert udf_expand_dir_adinicb() to new directory iteration
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 57bda9fb169d689bff4108265a897d324b5fb8c3 ]
Convert udf_expand_dir_adinicb() to new directory iteration code.
--- fs/udf/inode.c | 66 +++++++++++++++++++++++++-------------------------------- 1 file changed, 29 insertions(+), 37 deletions(-)
fs/udf/inode.c +29 -37
@@ -331,14 +331,12 @@ struct buffer_head *udf_expand_dir_adiniudf_pblk_t newblock;struct buffer_head *dbh =NULL ;struct kernel_lb_addr eloc; -uint8_t alloctype;struct extent_position epos; - -struct udf_fileident_bh sfibh, dfibh; -loff_t f_pos =udf_ext0_offset (inode); -int size =udf_ext0_offset (inode) + inode->i_size; -struct fileIdentDesc cfi, *sfi, *dfi; +uint8_t alloctype;struct udf_inode_info *iinfo =UDF_I (inode); +struct udf_fileident_iter iter; +uint8_t *impuse; +int ret;if (UDF_QUERY_FLAG (inode->i_sb,UDF_FLAG_USE_SHORT_AD )) alloctype =ICBTAG_FLAG_AD_SHORT ;
@@ -366,38 +364,14 @@ struct buffer_head *udf_expand_dir_adiniif (!dbh)return NULL ;lock_buffer (dbh); -memset (dbh->b_data,0x00 , inode->i_sb->s_blocksize); +memcpy (dbh->b_data, iinfo->i_data, inode->i_size); +memset (dbh->b_data + inode->i_size,0 , + inode->i_sb->s_blocksize - inode->i_size);set_buffer_uptodate (dbh);unlock_buffer (dbh); -mark_buffer_dirty_inode (dbh, inode); - - sfibh.soffset = sfibh.eoffset = - f_pos & (inode->i_sb->s_blocksize -1 ); - sfibh.sbh = sfibh.ebh =NULL ; - dfibh.soffset = dfibh.eoffset =0 ; - dfibh.sbh = dfibh.ebh = dbh; -while (f_pos < size) { - iinfo->i_alloc_type =ICBTAG_FLAG_AD_IN_ICB ; - sfi =udf_fileident_read (inode, &f_pos, &sfibh, &cfi,NULL , -NULL ,NULL ,NULL ); -if (!sfi) { -brelse (dbh); -return NULL ; - } - iinfo->i_alloc_type = alloctype; - sfi->descTag.tagLocation =cpu_to_le32 (*block); - dfibh.soffset = dfibh.eoffset; - dfibh.eoffset += (sfibh.eoffset - sfibh.soffset); - dfi = (struct fileIdentDesc *)(dbh->b_data + dfibh.soffset); -if (udf_write_fi (inode, sfi, dfi, &dfibh, sfi->impUse, -udf_get_fi_ident (sfi))) { - iinfo->i_alloc_type =ICBTAG_FLAG_AD_IN_ICB ; -brelse (dbh); -return NULL ; - } - } -mark_buffer_dirty_inode (dbh, inode); +/* Drop inline data, add block instead */ + iinfo->i_alloc_type = alloctype;memset (iinfo->i_data + iinfo->i_lenEAttr,0 , iinfo->i_lenAlloc); iinfo->i_lenAlloc =0 ; eloc.logicalBlockNum = *block;
@@ -408,10 +382,28 @@ struct buffer_head *udf_expand_dir_adini epos.block = iinfo->i_location; epos.offset =udf_file_entry_alloc_offset (inode);udf_add_aext (inode, &epos, &eloc, inode->i_size,0 ); -/* UniqueID stuff */ -brelse (epos.bh);mark_inode_dirty (inode); + +/* Now fixup tags in moved directory entries */ +for (ret =udf_fiiter_init (&iter, inode,0 ); + !ret && iter.pos < inode->i_size; + ret =udf_fiiter_advance (&iter)) { + iter.fi.descTag.tagLocation =cpu_to_le32 (*block); +if (iter.fi.lengthOfImpUse !=cpu_to_le16 (0 )) + impuse = dbh->b_data + iter.pos + +sizeof (struct fileIdentDesc ); +else + impuse =NULL ; +udf_fiiter_write_fi (&iter, impuse); + } +/* +* We don't expect the iteration to fail as the directory has been +* already verified to be correct +*/ +WARN_ON_ONCE (ret); +udf_fiiter_release (&iter); +return dbh; }
Greg Kroah-Hartman
maintainerPATCH 8/91 udf: Move udf_expand_dir_adinicb() to its callsite
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit a27b2923de7efaa1da1e243fb80ff0fa432e4be0 ]
There is just one caller of udf_expand_dir_adinicb(). Move the function to its caller into namei.c as it is more about directory handling than anything else anyway.
--- fs/udf/inode.c | 82 ------------------------------------------------------- fs/udf/namei.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ fs/udf/udfdecl.h | 2 - 3 files changed, 82 insertions(+), 84 deletions(-)
fs/udf/inode.c +0 -82
@@ -325,88 +325,6 @@ int udf_expand_file_adinicb(struct inodereturn err; } -struct buffer_head *udf_expand_dir_adinicb (struct inode *inode, -udf_pblk_t *block,int *err) -{ -udf_pblk_t newblock; -struct buffer_head *dbh =NULL ; -struct kernel_lb_addr eloc; -struct extent_position epos; -uint8_t alloctype; -struct udf_inode_info *iinfo =UDF_I (inode); -struct udf_fileident_iter iter; -uint8_t *impuse; -int ret; - -if (UDF_QUERY_FLAG (inode->i_sb,UDF_FLAG_USE_SHORT_AD )) - alloctype =ICBTAG_FLAG_AD_SHORT ; -else - alloctype =ICBTAG_FLAG_AD_LONG ; - -if (!inode->i_size) { - iinfo->i_alloc_type = alloctype; -mark_inode_dirty (inode); -return NULL ; - } - -/* alloc block, and copy data to it */ - *block =udf_new_block (inode->i_sb, inode, - iinfo->i_location.partitionReferenceNum, - iinfo->i_location.logicalBlockNum, err); -if (!(*block)) -return NULL ; - newblock =udf_get_pblock (inode->i_sb, *block, - iinfo->i_location.partitionReferenceNum, -0 ); -if (!newblock) -return NULL ; - dbh =udf_tgetblk (inode->i_sb, newblock); -if (!dbh) -return NULL ; -lock_buffer (dbh); -memcpy (dbh->b_data, iinfo->i_data, inode->i_size); -memset (dbh->b_data + inode->i_size,0 , - inode->i_sb->s_blocksize - inode->i_size); -set_buffer_uptodate (dbh); -unlock_buffer (dbh); - -/* Drop inline data, add block instead */ - iinfo->i_alloc_type = alloctype; -memset (iinfo->i_data + iinfo->i_lenEAttr,0 , iinfo->i_lenAlloc); - iinfo->i_lenAlloc =0 ; - eloc.logicalBlockNum = *block; - eloc.partitionReferenceNum = - iinfo->i_location.partitionReferenceNum; - iinfo->i_lenExtents = inode->i_size; - epos.bh =NULL ; - epos.block = iinfo->i_location; - epos.offset =udf_file_entry_alloc_offset (inode); -udf_add_aext (inode, &epos, &eloc, inode->i_size,0 ); -brelse (epos.bh); -mark_inode_dirty (inode); - -/* Now fixup tags in moved directory entries */ -for (ret =udf_fiiter_init (&iter, inode,0 ); - !ret && iter.pos < inode->i_size; - ret =udf_fiiter_advance (&iter)) { - iter.fi.descTag.tagLocation =cpu_to_le32 (*block); -if (iter.fi.lengthOfImpUse !=cpu_to_le16 (0 )) - impuse = dbh->b_data + iter.pos + -sizeof (struct fileIdentDesc ); -else - impuse =NULL ; -udf_fiiter_write_fi (&iter, impuse); - } -/* -* We don't expect the iteration to fail as the directory has been -* already verified to be correct -*/ -WARN_ON_ONCE (ret); -udf_fiiter_release (&iter); - -return dbh; -} -static int udf_get_block (struct inode *inode,sector_t block,struct buffer_head *bh_result,int create) {
fs/udf/namei.c +82 -0
88 lines not on this page · raw message
fs/udf/udfdecl.h +0 -2
@@ -169,8 +169,6 @@ static inline struct inode *udf_iget(strreturn __udf_iget (sb, ino, false); }extern int udf_expand_file_adinicb (struct inode *); -extern struct buffer_head *udf_expand_dir_adinicb (struct inode *inode, -udf_pblk_t *block,int *err);extern struct buffer_head *udf_bread (struct inode *inode,udf_pblk_t block,int create,int *err);extern int udf_setsize (struct inode *,loff_t );
Greg Kroah-Hartman
maintainerPATCH 9/91 udf: Implement searching for directory entry using new iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 1c80afa04db39c98aebea9aabfafa37a208cdfee ]
Implement searching for directory entry - udf_fiiter_find_entry() - using new directory iteration code.
--- fs/udf/namei.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+)
fs/udf/namei.c +67 -0
@@ -141,6 +141,73 @@ int udf_write_fi(struct inode *inode, st }/** +* udf_fiiter_find_entry - find entry in given directory. +* +* @dir: directory inode to search in +* @child: qstr of the name +* @iter: iter to use for searching +* +* This function searches in the directory @dir for a file name @child. When +* found, @iter points to the position in the directory with given entry. +* +* Returns 0 on success, < 0 on error (including -ENOENT). +*/ +static int udf_fiiter_find_entry (struct inode *dir,const struct qstr *child, +struct udf_fileident_iter *iter) +{ +int flen; +unsigned char *fname =NULL ; +struct super_block *sb = dir->i_sb; +int isdotdot = child->len ==2 && + child->name[0 ] =='.' && child->name[1 ] =='.' ; +int ret; + + fname =kmalloc (UDF_NAME_LEN ,GFP_NOFS ); +if (!fname) +return -ENOMEM ; + +for (ret =udf_fiiter_init (iter, dir,0 ); + !ret && iter->pos < dir->i_size; + ret =udf_fiiter_advance (iter)) { +if (iter->fi.fileCharacteristics &FID_FILE_CHAR_DELETED ) { +if (!UDF_QUERY_FLAG (sb,UDF_FLAG_UNDELETE )) +continue ; + } + +if (iter->fi.fileCharacteristics &FID_FILE_CHAR_HIDDEN ) { +if (!UDF_QUERY_FLAG (sb,UDF_FLAG_UNHIDE )) +continue ; + } + +if ((iter->fi.fileCharacteristics &FID_FILE_CHAR_PARENT ) && + isdotdot) + goto out_ok; + +if (!iter->fi.lengthFileIdent) +continue ; + + flen =udf_get_filename (sb, iter->name, + iter->fi.lengthFileIdent, fname,UDF_NAME_LEN ); +if (flen <0 ) { + ret = flen; + goto out_err; + } + +if (udf_match (flen, fname, child->len, child->name)) + goto out_ok; + } +if (!ret) + ret = -ENOENT ; + +out_err: +udf_fiiter_release (iter); +out_ok: +kfree (fname); + +return ret; +} + +/** * udf_find_entry - find entry in given directory. * * @dir: directory inode to search in
Greg Kroah-Hartman
maintainerPATCH 10/91 udf: Provide function to mark entry as deleted using new directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 4cca7e3df7bea8661a0c2a70c0d250e9aa5cedb4 ]
Provide function udf_fiiter_delete_entry() to mark directory entry as deleted using new directory iteration code.
--- fs/udf/namei.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
fs/udf/namei.c +10 -0
@@ -714,6 +714,16 @@ out_ok:return fi; } +static void udf_fiiter_delete_entry (struct udf_fileident_iter *iter) +{ + iter->fi.fileCharacteristics |=FID_FILE_CHAR_DELETED ; + +if (UDF_QUERY_FLAG (iter->dir->i_sb,UDF_FLAG_STRICT )) +memset (&iter->fi.icb,0x00 ,sizeof (struct long_ad )); + +udf_fiiter_write_fi (iter,NULL ); +} +static int udf_delete_entry (struct inode *inode,struct fileIdentDesc *fi,struct udf_fileident_bh *fibh,struct fileIdentDesc *cfi)
Greg Kroah-Hartman
maintainerPATCH 11/91 udf: Convert udf_rename() to new directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit e9109a92d2a95889498bed3719cd2318892171a2 ]
Convert udf_rename() to use new directory iteration code.
[cascardo: remove the call to udf_rename_tag per commit
27ab33854873 ("udf: Fix bogus checksum computation in udf_rename()")]
--- fs/udf/namei.c | 166 ++++++++++++++++++++++++++------------------------------- 1 file changed, 78 insertions(+), 88 deletions(-)
fs/udf/namei.c +78 -88
@@ -1238,78 +1238,68 @@ static int udf_rename(struct user_namesp {struct inode *old_inode =d_inode (old_dentry);struct inode *new_inode =d_inode (new_dentry); -struct udf_fileident_bh ofibh, nfibh; -struct fileIdentDesc *ofi =NULL , *nfi =NULL , *dir_fi =NULL ; -struct fileIdentDesc ocfi, ncfi; -struct buffer_head *dir_bh =NULL ; -int retval = -ENOENT ; +struct udf_fileident_iter oiter, niter, diriter; +bool has_diriter = false; +int retval;struct kernel_lb_addr tloc; -struct udf_inode_info *old_iinfo =UDF_I (old_inode);if (flags & ~RENAME_NOREPLACE )return -EINVAL ; - ofi =udf_find_entry (old_dir, &old_dentry->d_name, &ofibh, &ocfi); -if (!ofi ||IS_ERR (ofi)) { -if (IS_ERR (ofi)) - retval =PTR_ERR (ofi); - goto end_rename; - } - -if (ofibh.sbh != ofibh.ebh) -brelse (ofibh.ebh); - -brelse (ofibh.sbh); - tloc =lelb_to_cpu (ocfi.icb.extLocation); -if (udf_get_lb_pblock (old_dir->i_sb, &tloc,0 ) != old_inode->i_ino) - goto end_rename; - - nfi =udf_find_entry (new_dir, &new_dentry->d_name, &nfibh, &ncfi); -if (IS_ERR (nfi)) { - retval =PTR_ERR (nfi); - goto end_rename; - } -if (nfi && !new_inode) { -if (nfibh.sbh != nfibh.ebh) -brelse (nfibh.ebh); -brelse (nfibh.sbh); - nfi =NULL ; + retval =udf_fiiter_find_entry (old_dir, &old_dentry->d_name, &oiter); +if (retval) +return retval; + + tloc =lelb_to_cpu (oiter.fi.icb.extLocation); +if (udf_get_lb_pblock (old_dir->i_sb, &tloc,0 ) != old_inode->i_ino) { + retval = -ENOENT ; + goto out_oiter; } -if (S_ISDIR (old_inode->i_mode)) { -int offset =udf_ext0_offset (old_inode); +if (S_ISDIR (old_inode->i_mode)) {if (new_inode) { retval = -ENOTEMPTY ;if (!empty_dir (new_inode)) - goto end_rename; + goto out_oiter; } - retval = -EIO ; -if (old_iinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB ) { - dir_fi =udf_get_fileident ( - old_iinfo->i_data - - (old_iinfo->i_efe ? -sizeof (struct extendedFileEntry ) : -sizeof (struct fileEntry )), - old_inode->i_sb->s_blocksize, &offset); - }else { - dir_bh =udf_bread (old_inode,0 ,0 , &retval); -if (!dir_bh) - goto end_rename; - dir_fi =udf_get_fileident (dir_bh->b_data, - old_inode->i_sb->s_blocksize, &offset); + retval =udf_fiiter_find_entry (old_inode, &dotdot_name, + &diriter); +if (retval == -ENOENT ) { +udf_err (old_inode->i_sb, +"directory (ino %lu) has no '..' entry\n" , + old_inode->i_ino); + retval = -EFSCORRUPTED ; } -if (!dir_fi) - goto end_rename; - tloc =lelb_to_cpu (dir_fi->icb.extLocation); +if (retval) + goto out_oiter; + has_diriter = true; + tloc =lelb_to_cpu (diriter.fi.icb.extLocation);if (udf_get_lb_pblock (old_inode->i_sb, &tloc,0 ) != - old_dir->i_ino) - goto end_rename; + old_dir->i_ino) { + retval = -EFSCORRUPTED ; +udf_err (old_inode->i_sb, +"directory (ino %lu) has parent entry pointing to another inode (%lu != %u)\n" , + old_inode->i_ino, old_dir->i_ino, +udf_get_lb_pblock (old_inode->i_sb, &tloc,0 )); + goto out_oiter; + } } -if (!nfi) { - nfi =udf_add_entry (new_dir, new_dentry, &nfibh, &ncfi, - &retval); -if (!nfi) - goto end_rename; + + retval =udf_fiiter_find_entry (new_dir, &new_dentry->d_name, &niter); +if (retval && retval != -ENOENT ) + goto out_oiter; +/* Entry found but not passed by VFS? */ +if (!retval && !new_inode) { + retval = -EFSCORRUPTED ; +udf_fiiter_release (&niter); + goto out_oiter; + } +/* Entry not found? Need to add one... */ +if (retval) { +udf_fiiter_release (&niter); + retval =udf_fiiter_add_entry (new_dir, new_dentry, &niter); +if (retval) + goto out_oiter; }/*
@@ -1322,14 +1312,26 @@ static int udf_rename(struct user_namesp/* * ok, that's it */ - ncfi.fileVersionNum = ocfi.fileVersionNum; - ncfi.fileCharacteristics = ocfi.fileCharacteristics; -memcpy (&(ncfi.icb), &(ocfi.icb),sizeof (ocfi.icb)); -udf_write_fi (new_dir, &ncfi, nfi, &nfibh,NULL ,NULL ); - -/* The old fid may have moved - find it again */ - ofi =udf_find_entry (old_dir, &old_dentry->d_name, &ofibh, &ocfi); -udf_delete_entry (old_dir, ofi, &ofibh, &ocfi); + niter.fi.fileVersionNum = oiter.fi.fileVersionNum; + niter.fi.fileCharacteristics = oiter.fi.fileCharacteristics; +memcpy (&(niter.fi.icb), &(oiter.fi.icb),sizeof (oiter.fi.icb)); +udf_fiiter_write_fi (&niter,NULL ); +udf_fiiter_release (&niter); + +/* +* The old entry may have moved due to new entry allocation. Find it +* again. +*/ +udf_fiiter_release (&oiter); + retval =udf_fiiter_find_entry (old_dir, &old_dentry->d_name, &oiter); +if (retval) { +udf_err (old_dir->i_sb, +"failed to find renamed entry again in directory (ino %lu)\n" , + old_dir->i_ino); + }else { +udf_fiiter_delete_entry (&oiter); +udf_fiiter_release (&oiter); + }if (new_inode) { new_inode->i_ctime =current_time (new_inode);
@@ -1340,12 +1342,11 @@ static int udf_rename(struct user_namespmark_inode_dirty (old_dir);mark_inode_dirty (new_dir); -if (dir_fi) { - dir_fi->icb.extLocation =cpu_to_lelb (UDF_I (new_dir)->i_location); -if (old_iinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB ) -mark_inode_dirty (old_inode); -else -mark_buffer_dirty_inode (dir_bh, old_inode); +if (has_diriter) { + diriter.fi.icb.extLocation = +cpu_to_lelb (UDF_I (new_dir)->i_location); +udf_fiiter_write_fi (&diriter,NULL ); +udf_fiiter_release (&diriter);inode_dec_link_count (old_dir);if (new_inode)
@@ -1355,22 +1356,11 @@ static int udf_rename(struct user_namespmark_inode_dirty (new_dir); } } - -if (ofi) { -if (ofibh.sbh != ofibh.ebh) -brelse (ofibh.ebh); -brelse (ofibh.sbh); - } - - retval =0 ; - -end_rename: -brelse (dir_bh); -if (nfi) { -if (nfibh.sbh != nfibh.ebh) -brelse (nfibh.ebh); -brelse (nfibh.sbh); - } +return 0 ; +out_oiter: +if (has_diriter) +udf_fiiter_release (&diriter); +udf_fiiter_release (&oiter);return retval; }
Greg Kroah-Hartman
maintainerPATCH 12/91 udf: Convert udf_readdir() to new directory iteration
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 7cd7a36ab44d3e8c1dee7185ef407b9831a8220b ]
Convert udf_readdir() to new directory iteration functions.
--- fs/udf/dir.c | 148 ++++++++++------------------------------------------------- 1 file changed, 27 insertions(+), 121 deletions(-)
fs/udf/dir.c +27 -121
@@ -39,26 +39,13 @@static int udf_readdir (struct file *file,struct dir_context *ctx) {struct inode *dir =file_inode (file); -struct udf_inode_info *iinfo =UDF_I (dir); -struct udf_fileident_bh fibh = { .sbh =NULL , .ebh =NULL }; -struct fileIdentDesc *fi =NULL ; -struct fileIdentDesc cfi; -udf_pblk_t block, iblock;loff_t nf_pos, emit_pos =0 ;int flen; -unsigned char *fname =NULL , *copy_name =NULL ; -unsigned char *nameptr; -uint16_t liu; -uint8_t lfi; -loff_t size =udf_ext0_offset (dir) + dir->i_size; -struct buffer_head *tmp, *bha[16 ]; -struct kernel_lb_addr eloc; -uint32_t elen; -sector_t offset; -int i, num, ret =0 ; -struct extent_position epos = {NULL ,0 , {0 ,0 } }; +unsigned char *fname =NULL ; +int ret =0 ;struct super_block *sb = dir->i_sb;bool pos_valid = false; +struct udf_fileident_iter iter;if (ctx->pos ==0 ) {if (!dir_emit_dot (file, ctx))
@@ -66,7 +53,7 @@ static int udf_readdir(struct file *file ctx->pos =1 ; } nf_pos = (ctx->pos -1 ) <<2 ; -if (nf_pos >= size) +if (nf_pos >= dir->i_size) goto out;/*
@@ -90,138 +77,57 @@ static int udf_readdir(struct file *file goto out; } -if (nf_pos ==0 ) - nf_pos =udf_ext0_offset (dir); - - fibh.soffset = fibh.eoffset = nf_pos & (sb->s_blocksize -1 ); -if (iinfo->i_alloc_type !=ICBTAG_FLAG_AD_IN_ICB ) { -if (inode_bmap (dir, nf_pos >> sb->s_blocksize_bits, - &epos, &eloc, &elen, &offset) - != (EXT_RECORDED_ALLOCATED >>30 )) { - ret = -ENOENT ; - goto out; - } - block =udf_get_lb_pblock (sb, &eloc, offset); -if ((++offset << sb->s_blocksize_bits) < elen) { -if (iinfo->i_alloc_type ==ICBTAG_FLAG_AD_SHORT ) - epos.offset -=sizeof (struct short_ad ); -else if (iinfo->i_alloc_type == -ICBTAG_FLAG_AD_LONG ) - epos.offset -=sizeof (struct long_ad ); - }else { - offset =0 ; - } - -if (!(fibh.sbh = fibh.ebh =udf_tread (sb, block))) { - ret = -EIO ; - goto out; - } - -if (!(offset & ((16 >> (sb->s_blocksize_bits -9 )) -1 ))) { - i =16 >> (sb->s_blocksize_bits -9 ); -if (i + offset > (elen >> sb->s_blocksize_bits)) - i = (elen >> sb->s_blocksize_bits) - offset; -for (num =0 ; i >0 ; i--) { - block =udf_get_lb_pblock (sb, &eloc, offset + i); - tmp =udf_tgetblk (sb, block); -if (tmp && !buffer_uptodate (tmp) && !buffer_locked (tmp)) - bha[num++] = tmp; -else -brelse (tmp); - } -if (num) { -bh_readahead_batch (num, bha,REQ_RAHEAD ); -for (i =0 ; i < num; i++) -brelse (bha[i]); - } - } - } - -while (nf_pos < size) { +for (ret =udf_fiiter_init (&iter, dir, nf_pos); + !ret && iter.pos < dir->i_size; + ret =udf_fiiter_advance (&iter)) {struct kernel_lb_addr tloc; -loff_t cur_pos = nf_pos; - -/* Update file position only if we got past the current one */ -if (nf_pos >= emit_pos) { - ctx->pos = (nf_pos >>2 ) +1 ; - pos_valid = true; - } +udf_pblk_t iblock; - fi =udf_fileident_read (dir, &nf_pos, &fibh, &cfi, &epos, &eloc, - &elen, &offset); -if (!fi) - goto out;/* Still not at offset where user asked us to read from? */ -if (cur_pos < emit_pos) +if (iter.pos < emit_pos)continue ; - liu =le16_to_cpu (cfi.lengthOfImpUse); - lfi = cfi.lengthFileIdent; - -if (fibh.sbh == fibh.ebh) { - nameptr =udf_get_fi_ident (fi); - }else { -int poffset;/* Unpaded ending offset */ - - poffset = fibh.soffset +sizeof (struct fileIdentDesc ) + liu + lfi; - -if (poffset >= lfi) { - nameptr = (char *)(fibh.ebh->b_data + poffset - lfi); - }else { -if (!copy_name) { - copy_name =kmalloc (UDF_NAME_LEN , -GFP_NOFS ); -if (!copy_name) { - ret = -ENOMEM ; - goto out; - } - } - nameptr = copy_name; -memcpy (nameptr,udf_get_fi_ident (fi), - lfi - poffset); -memcpy (nameptr + lfi - poffset, - fibh.ebh->b_data, poffset); - } - } +/* Update file position only if we got past the current one */ + pos_valid = true; + ctx->pos = (iter.pos >>2 ) +1 ; -if ((cfi.fileCharacteristics &FID_FILE_CHAR_DELETED ) !=0 ) { +if (iter.fi.fileCharacteristics &FID_FILE_CHAR_DELETED ) {if (!UDF_QUERY_FLAG (sb,UDF_FLAG_UNDELETE ))continue ; } -if ((cfi.fileCharacteristics &FID_FILE_CHAR_HIDDEN ) !=0 ) { +if (iter.fi.fileCharacteristics &FID_FILE_CHAR_HIDDEN ) {if (!UDF_QUERY_FLAG (sb,UDF_FLAG_UNHIDE ))continue ; } -if (cfi.fileCharacteristics &FID_FILE_CHAR_PARENT ) { +if (iter.fi.fileCharacteristics &FID_FILE_CHAR_PARENT ) {if (!dir_emit_dotdot (file, ctx)) - goto out; + goto out_iter;continue ; } - flen =udf_get_filename (sb, nameptr, lfi, fname,UDF_NAME_LEN ); + flen =udf_get_filename (sb, iter.name, + iter.fi.lengthFileIdent, fname,UDF_NAME_LEN );if (flen <0 )continue ; - tloc =lelb_to_cpu (cfi.icb.extLocation); + tloc =lelb_to_cpu (iter.fi.icb.extLocation); iblock =udf_get_lb_pblock (sb, &tloc,0 );if (!dir_emit (ctx, fname, flen, iblock,DT_UNKNOWN )) - goto out; - }/* end while */ - - ctx->pos = (nf_pos >>2 ) +1 ; - pos_valid = true; + goto out_iter; + } +if (!ret) { + ctx->pos = (iter.pos >>2 ) +1 ; + pos_valid = true; + } +out_iter: +udf_fiiter_release (&iter); out:if (pos_valid) file->f_version =inode_query_iversion (dir); -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); -brelse (epos.bh);kfree (fname); -kfree (copy_name);return ret; }
Greg Kroah-Hartman
maintainerPATCH 13/91 udf: Convert udf_lookup() to use new directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 200918b34d158cdaee531db7e0c80b92c57e66f1 ]
Convert udf_lookup() to use udf_fiiter_find_entry() for looking up directory entries.
--- fs/udf/namei.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-)
fs/udf/namei.c +8 -11
@@ -366,25 +366,22 @@ static struct dentry *udf_lookup(struct unsigned int flags) {struct inode *inode =NULL ; -struct fileIdentDesc cfi; -struct udf_fileident_bh fibh; -struct fileIdentDesc *fi; +struct udf_fileident_iter iter; +int err;if (dentry->d_name.len >UDF_NAME_LEN )return ERR_PTR (-ENAMETOOLONG ); - fi =udf_find_entry (dir, &dentry->d_name, &fibh, &cfi); -if (IS_ERR (fi)) -return ERR_CAST (fi); + err =udf_fiiter_find_entry (dir, &dentry->d_name, &iter); +if (err <0 && err != -ENOENT ) +return ERR_PTR (err); -if (fi) { +if (err ==0 ) {struct kernel_lb_addr loc; -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); + loc =lelb_to_cpu (iter.fi.icb.extLocation); +udf_fiiter_release (&iter); - loc =lelb_to_cpu (cfi.icb.extLocation); inode =udf_iget (dir->i_sb, &loc);if (IS_ERR (inode))return ERR_CAST (inode);
Greg Kroah-Hartman
maintainerPATCH 14/91 udf: Convert udf_get_parent() to new directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 9b06fbef4202363d74bba5459ddd231db6d3b1af ]
Convert udf_get_parent() to use udf_fiiter_find_entry().
--- fs/udf/namei.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)
fs/udf/namei.c +7 -9
@@ -1366,17 +1366,15 @@ static struct dentry *udf_get_parent(str {struct kernel_lb_addr tloc;struct inode *inode =NULL ; -struct fileIdentDesc cfi; -struct udf_fileident_bh fibh; +struct udf_fileident_iter iter; +int err; -if (!udf_find_entry (d_inode (child), &dotdot_name, &fibh, &cfi)) -return ERR_PTR (-EACCES ); + err =udf_fiiter_find_entry (d_inode (child), &dotdot_name, &iter); +if (err) +return ERR_PTR (err); -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); - - tloc =lelb_to_cpu (cfi.icb.extLocation); + tloc =lelb_to_cpu (iter.fi.icb.extLocation); +udf_fiiter_release (&iter); inode =udf_iget (child->d_sb, &tloc);if (IS_ERR (inode))return ERR_CAST (inode);
Greg Kroah-Hartman
maintainerPATCH 15/91 udf: Convert empty_dir() to new directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit afb525f466f9fdc140b975221cb43fbb5c59314e ]
Convert empty_dir() to new directory iteration code.
--- fs/udf/namei.c | 68 +++++++-------------------------------------------------- 1 file changed, 9 insertions(+), 59 deletions(-)
fs/udf/namei.c +9 -59
@@ -879,69 +879,19 @@ out:static int empty_dir (struct inode *dir) { -struct fileIdentDesc *fi, cfi; -struct udf_fileident_bh fibh; -loff_t f_pos; -loff_t size =udf_ext0_offset (dir) + dir->i_size; -udf_pblk_t block; -struct kernel_lb_addr eloc; -uint32_t elen; -sector_t offset; -struct extent_position epos = {}; -struct udf_inode_info *dinfo =UDF_I (dir); +struct udf_fileident_iter iter; +int ret; - f_pos =udf_ext0_offset (dir); - fibh.soffset = fibh.eoffset = f_pos & (dir->i_sb->s_blocksize -1 ); - -if (dinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB ) - fibh.sbh = fibh.ebh =NULL ; -else if (inode_bmap (dir, f_pos >> dir->i_sb->s_blocksize_bits, - &epos, &eloc, &elen, &offset) == - (EXT_RECORDED_ALLOCATED >>30 )) { - block =udf_get_lb_pblock (dir->i_sb, &eloc, offset); -if ((++offset << dir->i_sb->s_blocksize_bits) < elen) { -if (dinfo->i_alloc_type ==ICBTAG_FLAG_AD_SHORT ) - epos.offset -=sizeof (struct short_ad ); -else if (dinfo->i_alloc_type ==ICBTAG_FLAG_AD_LONG ) - epos.offset -=sizeof (struct long_ad ); - }else - offset =0 ; - - fibh.sbh = fibh.ebh =udf_tread (dir->i_sb, block); -if (!fibh.sbh) { -brelse (epos.bh); -return 0 ; - } - }else { -brelse (epos.bh); -return 0 ; - } - -while (f_pos < size) { - fi =udf_fileident_read (dir, &f_pos, &fibh, &cfi, &epos, &eloc, - &elen, &offset); -if (!fi) { -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); -brelse (epos.bh); -return 0 ; - } - -if (cfi.lengthFileIdent && - (cfi.fileCharacteristics &FID_FILE_CHAR_DELETED ) ==0 ) { -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); -brelse (epos.bh); +for (ret =udf_fiiter_init (&iter, dir,0 ); + !ret && iter.pos < dir->i_size; + ret =udf_fiiter_advance (&iter)) { +if (iter.fi.lengthFileIdent && + !(iter.fi.fileCharacteristics &FID_FILE_CHAR_DELETED )) { +udf_fiiter_release (&iter);return 0 ; } } - -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); -brelse (epos.bh); +udf_fiiter_release (&iter);return 1 ; }
Greg Kroah-Hartman
maintainerPATCH 16/91 udf: Convert udf_rmdir() to new directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit d11ffa8d3ec11fdb665f12f95d58d74673051a93 ]
Convert udf_rmdir() to use new directory iteration code.
--- fs/udf/namei.c | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-)
fs/udf/namei.c +11 -21
@@ -898,30 +898,23 @@ static int empty_dir(struct inode *dir)static int udf_rmdir (struct inode *dir,struct dentry *dentry) { -int retval; +int ret;struct inode *inode =d_inode (dentry); -struct udf_fileident_bh fibh; -struct fileIdentDesc *fi, cfi; +struct udf_fileident_iter iter;struct kernel_lb_addr tloc; - retval = -ENOENT ; - fi =udf_find_entry (dir, &dentry->d_name, &fibh, &cfi); -if (IS_ERR_OR_NULL (fi)) { -if (fi) - retval =PTR_ERR (fi); + ret =udf_fiiter_find_entry (dir, &dentry->d_name, &iter); +if (ret) goto out; - } - retval = -EIO ; - tloc =lelb_to_cpu (cfi.icb.extLocation); + ret = -EFSCORRUPTED ; + tloc =lelb_to_cpu (iter.fi.icb.extLocation);if (udf_get_lb_pblock (dir->i_sb, &tloc,0 ) != inode->i_ino) goto end_rmdir; - retval = -ENOTEMPTY ; + ret = -ENOTEMPTY ;if (!empty_dir (inode)) goto end_rmdir; - retval =udf_delete_entry (dir, fi, &fibh, &cfi); -if (retval) - goto end_rmdir; +udf_fiiter_delete_entry (&iter);if (inode->i_nlink !=2 )udf_warn (inode->i_sb,"empty directory has nlink != 2 (%u)\n" , inode->i_nlink);
@@ -931,14 +924,11 @@ static int udf_rmdir(struct inode *dir, inode->i_ctime = dir->i_ctime = dir->i_mtime =current_time (inode);mark_inode_dirty (dir); - + ret =0 ; end_rmdir: -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); - +udf_fiiter_release (&iter); out: -return retval; +return ret; }static int udf_unlink (struct inode *dir,struct dentry *dentry)
Greg Kroah-Hartman
maintainerPATCH 17/91 udf: Convert udf_unlink() to new directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 6ec01a8020b54e278fecd1efe8603f8eb38fed84 ]
Convert udf_unlink() to new directory iteration code.
--- fs/udf/namei.c | 33 ++++++++++----------------------- 1 file changed, 10 insertions(+), 23 deletions(-)
fs/udf/namei.c +10 -23
@@ -933,24 +933,17 @@ out:static int udf_unlink (struct inode *dir,struct dentry *dentry) { -int retval; +int ret;struct inode *inode =d_inode (dentry); -struct udf_fileident_bh fibh; -struct fileIdentDesc *fi; -struct fileIdentDesc cfi; +struct udf_fileident_iter iter;struct kernel_lb_addr tloc; - retval = -ENOENT ; - fi =udf_find_entry (dir, &dentry->d_name, &fibh, &cfi); - -if (IS_ERR_OR_NULL (fi)) { -if (fi) - retval =PTR_ERR (fi); + ret =udf_fiiter_find_entry (dir, &dentry->d_name, &iter); +if (ret) goto out; - } - retval = -EIO ; - tloc =lelb_to_cpu (cfi.icb.extLocation); + ret = -EFSCORRUPTED ; + tloc =lelb_to_cpu (iter.fi.icb.extLocation);if (udf_get_lb_pblock (dir->i_sb, &tloc,0 ) != inode->i_ino) goto end_unlink;
@@ -959,22 +952,16 @@ static int udf_unlink(struct inode *dir, inode->i_ino, inode->i_nlink);set_nlink (inode,1 ); } - retval =udf_delete_entry (dir, fi, &fibh, &cfi); -if (retval) - goto end_unlink; +udf_fiiter_delete_entry (&iter); dir->i_ctime = dir->i_mtime =current_time (dir);mark_inode_dirty (dir);inode_dec_link_count (inode); inode->i_ctime = dir->i_ctime; - retval =0 ; - + ret =0 ; end_unlink: -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); - +udf_fiiter_release (&iter); out: -return retval; +return ret; } static int udf_symlink(struct user_namespace *mnt_userns, struct inode *dir,
Greg Kroah-Hartman
maintainerPATCH 18/91 udf: Implement adding of dir entries using new iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit f2844803404d9729f893e279ddea12678710e7fb ]
Implement function udf_fiiter_add_entry() adding new directory entries using new directory iteration code.
--- fs/udf/directory.c | 57 +++++++++++++++++++++++++++ fs/udf/namei.c | 110 +++++++++++++++++++++++++++++++++++++++++++++++++++++ fs/udf/udfdecl.h | 2 3 files changed, 169 insertions(+)
fs/udf/directory.c +57 -0
@@ -413,6 +413,63 @@ void udf_fiiter_write_fi(struct udf_fileinode_inc_iversion (iter->dir); } +void udf_fiiter_update_elen (struct udf_fileident_iter *iter,uint32_t new_elen) +{ +struct udf_inode_info *iinfo =UDF_I (iter->dir); +int diff = new_elen - iter->elen; + +/* Skip update when we already went past the last extent */ +if (!iter->elen) +return ; + iter->elen = new_elen; +if (iinfo->i_alloc_type ==ICBTAG_FLAG_AD_SHORT ) + iter->epos.offset -=sizeof (struct short_ad ); +else if (iinfo->i_alloc_type ==ICBTAG_FLAG_AD_LONG ) + iter->epos.offset -=sizeof (struct long_ad ); +udf_write_aext (iter->dir, &iter->epos, &iter->eloc, iter->elen,1 ); + iinfo->i_lenExtents += diff; +mark_inode_dirty (iter->dir); +} + +/* Append new block to directory. @iter is expected to point at EOF */ +int udf_fiiter_append_blk (struct udf_fileident_iter *iter) +{ +struct udf_inode_info *iinfo =UDF_I (iter->dir); +int blksize =1 << iter->dir->i_blkbits; +struct buffer_head *bh; +sector_t block; +uint32_t old_elen = iter->elen; +int err; + +if (WARN_ON_ONCE (iinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB )) +return -EINVAL ; + +/* Round up last extent in the file */ +udf_fiiter_update_elen (iter,ALIGN (iter->elen, blksize)); + +/* Allocate new block and refresh mapping information */ + block = iinfo->i_lenExtents >> iter->dir->i_blkbits; + bh =udf_bread (iter->dir, block,1 , &err); +if (!bh) { +udf_fiiter_update_elen (iter, old_elen); +return err; + } +if (inode_bmap (iter->dir, block, &iter->epos, &iter->eloc, &iter->elen, + &iter->loffset) != (EXT_RECORDED_ALLOCATED >>30 )) { +udf_err (iter->dir->i_sb, +"block %llu not allocated in directory (ino %lu)\n" , + (unsigned long long )block, iter->dir->i_ino); +return -EFSCORRUPTED ; + } +if (!(iter->pos & (blksize -1 ))) { +brelse (iter->bh[0 ]); + iter->bh[0 ] = bh; + }else { + iter->bh[1 ] = bh; + } +return 0 ; +} + struct fileIdentDesc *udf_fileident_read(struct inode *dir, loff_t *nf_pos, struct udf_fileident_bh *fibh, struct fileIdentDesc *cfi,
fs/udf/namei.c +110 -0
116 lines not on this page · raw message
fs/udf/udfdecl.h +2 -0
@@ -264,6 +264,8 @@ int udf_fiiter_init(struct udf_fileidentint udf_fiiter_advance (struct udf_fileident_iter *iter);void udf_fiiter_release (struct udf_fileident_iter *iter);void udf_fiiter_write_fi (struct udf_fileident_iter *iter,uint8_t *impuse); +void udf_fiiter_update_elen (struct udf_fileident_iter *iter,uint32_t new_elen); +int udf_fiiter_append_blk (struct udf_fileident_iter *iter); extern struct fileIdentDesc *udf_fileident_read(struct inode *, loff_t *, struct udf_fileident_bh *, struct fileIdentDesc *,
Greg Kroah-Hartman
maintainerPATCH 19/91 udf: Convert udf_add_nondir() to new directory iteration
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit ef91f9998bece00cf7f82ad26177f910a7124b25 ]
Convert udf_add_nondir() to new directory iteration code.
--- fs/udf/namei.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-)
fs/udf/namei.c +8 -11
@@ -847,26 +847,23 @@ static int udf_add_nondir(struct dentry {struct udf_inode_info *iinfo =UDF_I (inode);struct inode *dir =d_inode (dentry->d_parent); -struct udf_fileident_bh fibh; -struct fileIdentDesc cfi, *fi; +struct udf_fileident_iter iter;int err; - fi =udf_add_entry (dir, dentry, &fibh, &cfi, &err); -if (unlikely (!fi)) { + err =udf_fiiter_add_entry (dir, dentry, &iter); +if (err) {inode_dec_link_count (inode);discard_new_inode (inode);return err; } - cfi.icb.extLength =cpu_to_le32 (inode->i_sb->s_blocksize); - cfi.icb.extLocation =cpu_to_lelb (iinfo->i_location); - *(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse = + iter.fi.icb.extLength =cpu_to_le32 (inode->i_sb->s_blocksize); + iter.fi.icb.extLocation =cpu_to_lelb (iinfo->i_location); + *(__le32 *)((struct allocDescImpUse *)iter.fi.icb.impUse)->impUse =cpu_to_le32 (iinfo->i_unique &0x00000000FFFFFFFFUL ); -udf_write_fi (dir, &cfi, fi, &fibh,NULL ,NULL ); +udf_fiiter_write_fi (&iter,NULL ); dir->i_ctime = dir->i_mtime =current_time (dir);mark_inode_dirty (dir); -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); +udf_fiiter_release (&iter);d_instantiate_new (dentry, inode);return 0 ;
Greg Kroah-Hartman
maintainerPATCH 20/91 udf: Convert udf_mkdir() to new directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 00bce6f792caccefa73daeaf9bde82d24d50037f ]
Convert udf_mkdir() to new directory iteration code.
--- fs/udf/namei.c | 48 +++++++++++++++++++++--------------------------- 1 file changed, 21 insertions(+), 27 deletions(-)
fs/udf/namei.c +21 -27
@@ -928,8 +928,7 @@ static int udf_mkdir(struct user_namespa struct dentry *dentry, umode_t mode) {struct inode *inode; -struct udf_fileident_bh fibh; -struct fileIdentDesc cfi, *fi; +struct udf_fileident_iter iter;int err;struct udf_inode_info *dinfo =UDF_I (dir);struct udf_inode_info *iinfo;
@@ -941,47 +940,42 @@ static int udf_mkdir(struct user_namespa iinfo =UDF_I (inode); inode->i_op = &udf_dir_inode_operations; inode->i_fop = &udf_dir_operations; - fi =udf_add_entry (inode,NULL , &fibh, &cfi, &err); -if (!fi) { -inode_dec_link_count (inode); + err =udf_fiiter_add_entry (inode,NULL , &iter); +if (err) { +clear_nlink (inode);discard_new_inode (inode); - goto out; +return err; }set_nlink (inode,2 ); - cfi.icb.extLength =cpu_to_le32 (inode->i_sb->s_blocksize); - cfi.icb.extLocation =cpu_to_lelb (dinfo->i_location); - *(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse = + iter.fi.icb.extLength =cpu_to_le32 (inode->i_sb->s_blocksize); + iter.fi.icb.extLocation =cpu_to_lelb (dinfo->i_location); + *(__le32 *)((struct allocDescImpUse *)iter.fi.icb.impUse)->impUse =cpu_to_le32 (dinfo->i_unique &0x00000000FFFFFFFFUL ); - cfi.fileCharacteristics = + iter.fi.fileCharacteristics =FID_FILE_CHAR_DIRECTORY |FID_FILE_CHAR_PARENT ; -udf_write_fi (inode, &cfi, fi, &fibh,NULL ,NULL ); -brelse (fibh.sbh); +udf_fiiter_write_fi (&iter,NULL ); +udf_fiiter_release (&iter);mark_inode_dirty (inode); - fi =udf_add_entry (dir, dentry, &fibh, &cfi, &err); -if (!fi) { + err =udf_fiiter_add_entry (dir, dentry, &iter); +if (err) {clear_nlink (inode); -mark_inode_dirty (inode);discard_new_inode (inode); - goto out; +return err; } - cfi.icb.extLength =cpu_to_le32 (inode->i_sb->s_blocksize); - cfi.icb.extLocation =cpu_to_lelb (iinfo->i_location); - *(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse = + iter.fi.icb.extLength =cpu_to_le32 (inode->i_sb->s_blocksize); + iter.fi.icb.extLocation =cpu_to_lelb (iinfo->i_location); + *(__le32 *)((struct allocDescImpUse *)iter.fi.icb.impUse)->impUse =cpu_to_le32 (iinfo->i_unique &0x00000000FFFFFFFFUL ); - cfi.fileCharacteristics |=FID_FILE_CHAR_DIRECTORY ; -udf_write_fi (dir, &cfi, fi, &fibh,NULL ,NULL ); + iter.fi.fileCharacteristics |=FID_FILE_CHAR_DIRECTORY ; +udf_fiiter_write_fi (&iter,NULL ); +udf_fiiter_release (&iter);inc_nlink (dir); dir->i_ctime = dir->i_mtime =current_time (dir);mark_inode_dirty (dir);d_instantiate_new (dentry, inode); -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh); - err =0 ; -out: -return err; +return 0 ; }static int empty_dir (struct inode *dir)
Greg Kroah-Hartman
maintainerPATCH 21/91 udf: Convert udf_link() to new directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit dbfb102d16fb780c84f41adbaeb7eac907c415dc ]
Convert udf_link() to use new directory iteration code for adding entry into the directory.
--- fs/udf/namei.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-)
fs/udf/namei.c +8 -14
@@ -1222,27 +1222,21 @@ static int udf_link(struct dentry *old_d struct dentry *dentry) {struct inode *inode =d_inode (old_dentry); -struct udf_fileident_bh fibh; -struct fileIdentDesc cfi, *fi; +struct udf_fileident_iter iter;int err; - fi =udf_add_entry (dir, dentry, &fibh, &cfi, &err); -if (!fi) { + err =udf_fiiter_add_entry (dir, dentry, &iter); +if (err)return err; - } - cfi.icb.extLength =cpu_to_le32 (inode->i_sb->s_blocksize); - cfi.icb.extLocation =cpu_to_lelb (UDF_I (inode)->i_location); + iter.fi.icb.extLength =cpu_to_le32 (inode->i_sb->s_blocksize); + iter.fi.icb.extLocation =cpu_to_lelb (UDF_I (inode)->i_location);if (UDF_SB (inode->i_sb)->s_lvid_bh) { - *(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse = + *(__le32 *)((struct allocDescImpUse *)iter.fi.icb.impUse)->impUse =cpu_to_le32 (lvid_get_unique_id (inode->i_sb)); } -udf_write_fi (dir, &cfi, fi, &fibh,NULL ,NULL ); -if (UDF_I (dir)->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB ) -mark_inode_dirty (dir); +udf_fiiter_write_fi (&iter,NULL ); +udf_fiiter_release (&iter); -if (fibh.sbh != fibh.ebh) -brelse (fibh.ebh); -brelse (fibh.sbh);inc_nlink (inode); inode->i_ctime =current_time (inode);mark_inode_dirty (inode);
Greg Kroah-Hartman
maintainerPATCH 22/91 udf: Remove old directory iteration code
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 1e0290d61a870ed61a6510863029939bbf6b0006 ]
Remove old directory iteration code that is now unused.
--- fs/udf/directory.c | 178 ------------------ fs/udf/namei.c | 505 ----------------------------------------------------- fs/udf/udfdecl.h | 22 -- 3 files changed, 705 deletions(-)
fs/udf/directory.c +0 -178
@@ -470,184 +470,6 @@ int udf_fiiter_append_blk(struct udf_filreturn 0 ; } -struct fileIdentDesc *udf_fileident_read (struct inode *dir,loff_t *nf_pos, -struct udf_fileident_bh *fibh, -struct fileIdentDesc *cfi, -struct extent_position *epos, -struct kernel_lb_addr *eloc,uint32_t *elen, -sector_t *offset) -{ -struct fileIdentDesc *fi; -int i, num; -udf_pblk_t block; -struct buffer_head *tmp, *bha[16 ]; -struct udf_inode_info *iinfo =UDF_I (dir); - - fibh->soffset = fibh->eoffset; - -if (iinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB ) { - fi =udf_get_fileident (iinfo->i_data - - (iinfo->i_efe ? -sizeof (struct extendedFileEntry ) : -sizeof (struct fileEntry )), - dir->i_sb->s_blocksize, - &(fibh->eoffset)); -if (!fi) -return NULL ; - - *nf_pos += fibh->eoffset - fibh->soffset; - -memcpy ((uint8_t *)cfi, (uint8_t *)fi, -sizeof (struct fileIdentDesc )); - -return fi; - } - -if (fibh->eoffset == dir->i_sb->s_blocksize) { -uint32_t lextoffset = epos->offset; -unsigned char blocksize_bits = dir->i_sb->s_blocksize_bits; - -if (udf_next_aext (dir, epos, eloc, elen,1 ) != - (EXT_RECORDED_ALLOCATED >>30 )) -return NULL ; - - block =udf_get_lb_pblock (dir->i_sb, eloc, *offset); - - (*offset)++; - -if ((*offset << blocksize_bits) >= *elen) - *offset =0 ; -else - epos->offset = lextoffset; - -brelse (fibh->sbh); - fibh->sbh = fibh->ebh =udf_tread (dir->i_sb, block); -if (!fibh->sbh) -return NULL ; - fibh->soffset = fibh->eoffset =0 ; - -if (!(*offset & ((16 >> (blocksize_bits -9 )) -1 ))) { - i =16 >> (blocksize_bits -9 ); -if (i + *offset > (*elen >> blocksize_bits)) - i = (*elen >> blocksize_bits)-*offset; -for (num =0 ; i >0 ; i--) { - block =udf_get_lb_pblock (dir->i_sb, eloc, - *offset + i); - tmp =udf_tgetblk (dir->i_sb, block); -if (tmp && !buffer_uptodate (tmp) && - !buffer_locked (tmp)) - bha[num++] = tmp; -else -brelse (tmp); - } -if (num) { -bh_readahead_batch (num, bha,REQ_RAHEAD ); -for (i =0 ; i < num; i++) -brelse (bha[i]); - } - } - }else if (fibh->sbh != fibh->ebh) { -brelse (fibh->sbh); - fibh->sbh = fibh->ebh; - } - - fi =udf_get_fileident (fibh->sbh->b_data, dir->i_sb->s_blocksize, - &(fibh->eoffset)); - -if (!fi) -return NULL ; - - *nf_pos += fibh->eoffset - fibh->soffset; - -if (fibh->eoffset <= dir->i_sb->s_blocksize) { -memcpy ((uint8_t *)cfi, (uint8_t *)fi, -sizeof (struct fileIdentDesc )); - }else if (fibh->eoffset > dir->i_sb->s_blocksize) { -uint32_t lextoffset = epos->offset; - -if (udf_next_aext (dir, epos, eloc, elen,1 ) != - (EXT_RECORDED_ALLOCATED >>30 )) -return NULL ; - - block =udf_get_lb_pblock (dir->i_sb, eloc, *offset); - - (*offset)++; - -if ((*offset << dir->i_sb->s_blocksize_bits) >= *elen) - *offset =0 ; -else - epos->offset = lextoffset; - - fibh->soffset -= dir->i_sb->s_blocksize; - fibh->eoffset -= dir->i_sb->s_blocksize; - - fibh->ebh =udf_tread (dir->i_sb, block); -if (!fibh->ebh) -return NULL ; - -if (sizeof (struct fileIdentDesc ) > -fibh->soffset) { -int fi_len; - -memcpy ((uint8_t *)cfi, (uint8_t *)fi, -fibh->soffset); -memcpy ((uint8_t *)cfi - fibh->soffset, - fibh->ebh->b_data, -sizeof (struct fileIdentDesc ) + fibh->soffset); - - fi_len =udf_dir_entry_len (cfi); - *nf_pos += fi_len - (fibh->eoffset - fibh->soffset); - fibh->eoffset = fibh->soffset + fi_len; - }else { -memcpy ((uint8_t *)cfi, (uint8_t *)fi, -sizeof (struct fileIdentDesc )); - } - } -/* Got last entry outside of dir size - fs is corrupted! */ -if (*nf_pos > dir->i_size) -return NULL ; -return fi; -} - -struct fileIdentDesc *udf_get_fileident (void *buffer,int bufsize,int *offset) -{ -struct fileIdentDesc *fi; -int lengthThisIdent; -uint8_t *ptr; -int padlen; - -if ((!buffer) || (!offset)) { -udf_debug ("invalidparms, buffer=%p, offset=%p\n" , - buffer, offset); -return NULL ; - } - - ptr = buffer; - -if ((*offset >0 ) && (*offset < bufsize)) - ptr += *offset; - fi = (struct fileIdentDesc *)ptr; -if (fi->descTag.tagIdent !=cpu_to_le16 (TAG_IDENT_FID )) { -udf_debug ("0x%x != TAG_IDENT_FID\n" , -le16_to_cpu (fi->descTag.tagIdent)); -udf_debug ("offset: %d sizeof: %lu bufsize: %d\n" , - *offset, (unsigned long )sizeof (struct fileIdentDesc ), - bufsize); -return NULL ; - } -if ((*offset +sizeof (struct fileIdentDesc )) > bufsize) - lengthThisIdent =sizeof (struct fileIdentDesc ); -else - lengthThisIdent =sizeof (struct fileIdentDesc ) + - fi->lengthFileIdent +le16_to_cpu (fi->lengthOfImpUse); - -/* we need to figure padding, too! */ - padlen = lengthThisIdent %UDF_NAME_PAD ; -if (padlen) - lengthThisIdent += (UDF_NAME_PAD - padlen); - *offset = *offset + lengthThisIdent; - -return fi; -} -struct short_ad *udf_get_fileshortad (uint8_t *ptr,int maxoffset,uint32_t *offset,int inc) {
fs/udf/namei.c +0 -505
529 lines not on this page · raw message
fs/udf/udfdecl.h +0 -22
@@ -104,13 +104,6 @@ struct udf_fileident_iter {*/ }; -struct udf_fileident_bh { -struct buffer_head *sbh; -struct buffer_head *ebh; -int soffset; -int eoffset; -}; -struct udf_vds_record {uint32_t block;uint32_t volDescSeqNum;
@@ -139,19 +132,12 @@ struct inode *udf_find_metadata_inode_ef u32 meta_file_loc, u32 partition_num);/* namei.c */ -extern int udf_write_fi (struct inode *inode,struct fileIdentDesc *, -struct fileIdentDesc *,struct udf_fileident_bh *, -uint8_t *,uint8_t *);static inline unsigned int udf_dir_entry_len (struct fileIdentDesc *cfi) {return ALIGN (sizeof (struct fileIdentDesc ) +le16_to_cpu (cfi->lengthOfImpUse) + cfi->lengthFileIdent,UDF_NAME_PAD ); } -static inline uint8_t *udf_get_fi_ident (struct fileIdentDesc *fi) -{ -return ((uint8_t *)(fi +1 )) +le16_to_cpu (fi->lengthOfImpUse); -}/* file.c */ extern long udf_ioctl (struct file *,unsigned int ,unsigned long );
@@ -266,14 +252,6 @@ void udf_fiiter_release(struct udf_fileivoid udf_fiiter_write_fi (struct udf_fileident_iter *iter,uint8_t *impuse);void udf_fiiter_update_elen (struct udf_fileident_iter *iter,uint32_t new_elen);int udf_fiiter_append_blk (struct udf_fileident_iter *iter); -extern struct fileIdentDesc *udf_fileident_read (struct inode *,loff_t *, -struct udf_fileident_bh *, -struct fileIdentDesc *, -struct extent_position *, -struct kernel_lb_addr *,uint32_t *, -sector_t *); -extern struct fileIdentDesc *udf_get_fileident (void *buffer,int bufsize, -int *offset);extern struct long_ad *udf_get_filelongad (uint8_t *,int ,uint32_t *,int );extern struct short_ad *udf_get_fileshortad (uint8_t *,int ,uint32_t *,int );
Greg Kroah-Hartman
maintainerPATCH 23/91 udf: Handle error when expanding directory
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 33e9a53cd9f099b138578f8e1a3d60775ff8cbba ]
When there is an error when adding extent to the directory to expand it, make sure to propagate the error up properly. This is not expected to happen currently but let's make the code more futureproof.
--- fs/udf/namei.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
fs/udf/namei.c +6 -1
@@ -192,8 +192,13 @@ static struct buffer_head *udf_expand_di epos.bh =NULL ; epos.block = iinfo->i_location; epos.offset =udf_file_entry_alloc_offset (inode); -udf_add_aext (inode, &epos, &eloc, inode->i_size,0 ); + ret =udf_add_aext (inode, &epos, &eloc, inode->i_size,0 );brelse (epos.bh); +if (ret <0 ) { + *err = ret; +udf_free_blocks (inode->i_sb, inode, &eloc,0 ,1 ); +return NULL ; + }mark_inode_dirty (inode);/* Now fixup tags in moved directory entries */
Greg Kroah-Hartman
maintainerPATCH 24/91 udf: Dont return bh from udf_expand_dir_adinicb()
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit f386c802a6fda8f9fe4a5cf418c49aa84dfc52e4 ]
Nobody uses the bh returned from udf_expand_dir_adinicb(). Don't return it.
--- fs/udf/namei.c | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-)
fs/udf/namei.c +13 -20
@@ -136,8 +136,7 @@ static struct dentry *udf_lookup(structreturn d_splice_alias (inode, dentry); } -static struct buffer_head *udf_expand_dir_adinicb (struct inode *inode, -udf_pblk_t *block,int *err) +static int udf_expand_dir_adinicb (struct inode *inode,udf_pblk_t *block) {udf_pblk_t newblock;struct buffer_head *dbh =NULL ;
@@ -157,23 +156,23 @@ static struct buffer_head *udf_expand_diif (!inode->i_size) { iinfo->i_alloc_type = alloctype;mark_inode_dirty (inode); -return NULL ; +return 0 ; }/* alloc block, and copy data to it */ *block =udf_new_block (inode->i_sb, inode, iinfo->i_location.partitionReferenceNum, - iinfo->i_location.logicalBlockNum, err); + iinfo->i_location.logicalBlockNum, &ret);if (!(*block)) -return NULL ; +return ret; newblock =udf_get_pblock (inode->i_sb, *block, iinfo->i_location.partitionReferenceNum,0 ); -if (!newblock) -return NULL ; +if (newblock ==0xffffffff ) +return -EFSCORRUPTED ; dbh =udf_tgetblk (inode->i_sb, newblock);if (!dbh) -return NULL ; +return -ENOMEM ;lock_buffer (dbh);memcpy (dbh->b_data, iinfo->i_data, inode->i_size); memset(dbh->b_data + inode->i_size, 0,
@@ -195,9 +194,9 @@ static struct buffer_head *udf_expand_di ret =udf_add_aext (inode, &epos, &eloc, inode->i_size,0 );brelse (epos.bh);if (ret <0 ) { - *err = ret; +brelse (dbh);udf_free_blocks (inode->i_sb, inode, &eloc,0 ,1 ); -return NULL ; +return ret; }mark_inode_dirty (inode);
@@ -213,6 +212,7 @@ static struct buffer_head *udf_expand_di impuse =NULL ;udf_fiiter_write_fi (&iter, impuse); } +brelse (dbh);/* * We don't expect the iteration to fail as the directory has been * already verified to be correct
@@ -220,7 +220,7 @@ static struct buffer_head *udf_expand_diWARN_ON_ONCE (ret);udf_fiiter_release (&iter); -return dbh; +return 0 ; } static int udf_fiiter_add_entry(struct inode *dir, struct dentry *dentry,
@@ -266,17 +266,10 @@ static int udf_fiiter_add_entry(struct i }if (dinfo->i_alloc_type ==ICBTAG_FLAG_AD_IN_ICB && blksize -udf_ext0_offset (dir) - iter->pos < nfidlen) { -struct buffer_head *retbh; -udf_fiiter_release (iter); -/* -* FIXME: udf_expand_dir_adinicb does not need to return bh -* once other users are gone -*/ - retbh =udf_expand_dir_adinicb (dir, &block, &ret); -if (!retbh) + ret =udf_expand_dir_adinicb (dir, &block); +if (ret)return ret; -brelse (retbh); ret =udf_fiiter_init (iter, dir, dir->i_size);if (ret <0 )return ret;
Greg Kroah-Hartman
maintainerPATCH 25/91 net: enetc: remove xdp_drops statistic from enetc_xdp_drop()
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Fang <[email protected]>
commit 412950d5746f7aa139e14fe95338694c1f09b595 upstream.
The xdp_drops statistic indicates the number of XDP frames dropped in the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and XDP_REDIRECT actions. If frame loss occurs in these two actions, the frames loss count should not be included in xdp_drops, because there are already xdp_tx_drops and xdp_redirect_failures to count the frame loss of these two actions, so it's better to remove xdp_drops statistic from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action.
--- drivers/net/ethernet/freescale/enetc/enetc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/freescale/enetc/enetc.c +1 -1
@@ -1492,7 +1492,6 @@ static void enetc_xdp_drop(struct enetc_ &rx_ring->rx_swbd[rx_ring_first]);enetc_bdr_idx_inc (rx_ring, &rx_ring_first); } - rx_ring->stats.xdp_drops++; } static int enetc_clean_rx_ring_xdp(struct enetc_bdr *rx_ring,
@@ -1557,6 +1556,7 @@ static int enetc_clean_rx_ring_xdp(struc fallthrough;case XDP_DROP :enetc_xdp_drop (rx_ring, orig_i, i); + rx_ring->stats.xdp_drops++;break ;case XDP_PASS : rxbd = orig_rxbd;
Greg Kroah-Hartman
maintainerPATCH 26/91 net: enetc: add missing static descriptor and inline keyword
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Fang <[email protected]>
commit 1d7b2ce43d2c22a21dadaf689cb36a69570346a6 upstream.
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled. The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static8 warnings generated.
--- include/linux/fsl/enetc_mdio.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
include/linux/fsl/enetc_mdio.h +2 -1
@@ -48,7 +48,8 @@ static inline int enetc_mdio_read(structstatic inline int enetc_mdio_write (struct mii_bus *bus,int phy_id,int regnum,u16 value) {return -EINVAL ; } -struct enetc_hw *enetc_hw_alloc (struct device *dev,void __iomem *port_regs) +static inline struct enetc_hw *enetc_hw_alloc (struct device *dev, +void __iomem *port_regs) {return ERR_PTR (-EINVAL ); }#endif
Greg Kroah-Hartman
maintainerPATCH 27/91 posix-clock: Fix missing timespec64 check in pc_clock_settime()
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jinjie Ruan <[email protected]>
commit d8794ac20a299b647ba9958f6d657051fc51a540 upstream.
As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64().
As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid.
There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself.
--- kernel/time/posix-clock.c | 3 +++ 1 file changed, 3 insertions(+)
kernel/time/posix-clock.c +3 -0
@@ -299,6 +299,9 @@ static int pc_clock_settime(clockid_t id goto out; } +if (!timespec64_valid_strict (ts)) +return -EINVAL ; +if (cd.clk->ops.clock_settime) err = cd.clk->ops.clock_settime (cd.clk, ts);else
Greg Kroah-Hartman
maintainerPATCH 28/91 arm64: probes: Remove broken LDR (literal) uprobe support
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Rutland <[email protected]>
commit acc450aa07099d071b18174c22a1119c57da8227 upstream.
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are unsafe to use for uprobes. Both functions were originally written for use with kprobes, and access memory with plain C accesses. When uprobes was added, these were reused unmodified even though they cannot safely access user memory.
There are three key problems:
1) The plain C accesses do not have corresponding extable entries, and thus if they encounter a fault the kernel will treat these as unintentional accesses to user memory, resulting in a BUG() which will kill the kernel thread, and likely lead to further issues (e.g. lockup or panic()).
2) The plain C accesses are subject to HW PAN and SW PAN, and so when either is in use, any attempt to simulate an access to user memory will fault. Thus neither simulate_ldr_literal() nor simulate_ldrsw_literal() can do anything useful when simulating a user instruction on any system with HW PAN or SW PAN.
3) The plain C accesses are privileged, as they run in kernel context, and in practice can access a small range of kernel virtual addresses. The instructions they simulate have a range of +/-1MiB, and since the simulated instructions must itself be a user instructions in the TTBR0 address range, these can address the final 1MiB of the TTBR1 acddress range by wrapping downwards from an address in the first 1MiB of the TTBR0 address range.
In contemporary kernels the last 8MiB of TTBR1 address range is reserved, and accesses to this will always fault, meaning this is no worse than (1).
Historically, it was theoretically possible for the linear map or vmemmap to spill into the final 8MiB of the TTBR1 address range, but in practice this is extremely unlikely to occur as this would require either:
* Having enough physical memory to fill the entire linear map all the way to the final 1MiB of the TTBR1 address range.
* Getting unlucky with KASLR randomization of the linear map such that the populated region happens to overlap with the last 1MiB of the TTBR address range.
... and in either case if we were to spill into the final page there would be larger problems as the final page would alias with error pointers.
Practically speaking, (1) and (2) are the big issues. Given there have been no reports of problems since the broken code was introduced, it appears that no-one is relying on probing these instructions with uprobes.
Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW (literal), limiting the use of simulate_ldr_literal() and simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR (literal) and LDRSW (literal) will be rejected as arm_probe_decode_insn() will return INSN_REJECTED. In future we can consider introducing working uprobes support for these instructions, but this will require more significant work.
--- arch/arm64/kernel/probes/decode-insn.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
arch/arm64/kernel/probes/decode-insn.c +11 -5
@@ -99,10 +99,6 @@ arm_probe_decode_insn(probe_opcode_t ins aarch64_insn_is_blr(insn) || aarch64_insn_is_ret(insn)) { api->handler = simulate_br_blr_ret; - } else if (aarch64_insn_is_ldr_lit(insn)) { - api->handler = simulate_ldr_literal; - } else if (aarch64_insn_is_ldrsw_lit(insn)) { - api->handler = simulate_ldrsw_literal; } else {/* * Instruction cannot be stepped out-of-line and we don't
@@ -140,6 +136,17 @@ arm_kprobe_decode_insn(kprobe_opcode_t *probe_opcode_t insn =le32_to_cpu (*addr);probe_opcode_t *scan_end =NULL ;unsigned long size =0 , offset =0 ; +struct arch_probe_insn *api = &asi->api; + +if (aarch64_insn_is_ldr_lit (insn)) { + api->handler = simulate_ldr_literal; + decoded =INSN_GOOD_NO_SLOT ; + }else if (aarch64_insn_is_ldrsw_lit (insn)) { + api->handler = simulate_ldrsw_literal; + decoded =INSN_GOOD_NO_SLOT ; + }else { + decoded =arm_probe_decode_insn (insn, &asi->api); + }/* * If there's a symbol defined in front of and near enough to
@@ -157,7 +164,6 @@ arm_kprobe_decode_insn(kprobe_opcode_t *else scan_end = addr -MAX_ATOMIC_CONTEXT_SIZE ; } - decoded =arm_probe_decode_insn (insn, &asi->api);if (decoded !=INSN_REJECTED && scan_end)if (is_probed_address_atomic (addr -1 , scan_end))
Greg Kroah-Hartman
maintainerPATCH 29/91 arm64: probes: Fix simulate_ldr*_literal()
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Rutland <[email protected]>
commit 50f813e57601c22b6f26ced3193b9b94d70a2640 upstream.
The simulate_ldr_literal() code always loads a 64-bit quantity, and when simulating a 32-bit load into a 'W' register, it discards the most significant 32 bits. For big-endian kernels this means that the relevant bits are discarded, and the value returned is the the subsequent 32 bits in memory (i.e. the value at addr + 4).
Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a plain C load, which the compiler may tear or elide (e.g. if the target is the zero register). Today this doesn't happen to matter, but it may matter in future if trampoline code uses a LDR (literal) or LDRSW (literal).
Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an appropriately-sized READ_ONCE() to perform the access, which avoids these problems.
--- arch/arm64/kernel/probes/simulate-insn.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)
arch/arm64/kernel/probes/simulate-insn.c +7 -11
@@ -171,17 +171,15 @@ simulate_tbz_tbnz(u32 opcode, long addr,void __kprobes simulate_ldr_literal (u32 opcode,long addr,struct pt_regs *regs) { -u64 *load_addr; +unsigned long load_addr;int xn = opcode &0x1f ; -int disp; - disp =ldr_displacement (opcode); - load_addr = (u64 *) (addr + disp); + load_addr = addr +ldr_displacement (opcode);if (opcode & (1 <<30 ))/* x0-x30 */ -set_x_reg (regs, xn, *load_addr); +set_x_reg (regs, xn,READ_ONCE (*(u64 *)load_addr));else /* w0-w30 */ -set_w_reg (regs, xn, *load_addr); +set_w_reg (regs, xn,READ_ONCE (*(u32 *)load_addr));instruction_pointer_set (regs,instruction_pointer (regs) +4 ); }
@@ -189,14 +187,12 @@ simulate_ldr_literal(u32 opcode, long advoid __kprobes simulate_ldrsw_literal (u32 opcode,long addr,struct pt_regs *regs) { -s32 *load_addr; +unsigned long load_addr;int xn = opcode &0x1f ; -int disp; - disp =ldr_displacement (opcode); - load_addr = (s32 *) (addr + disp); + load_addr = addr +ldr_displacement (opcode); -set_x_reg (regs, xn, *load_addr); +set_x_reg (regs, xn,READ_ONCE (*(s32 *)load_addr));instruction_pointer_set (regs,instruction_pointer (regs) +4 ); }
Greg Kroah-Hartman
maintainerPATCH 30/91 net: macb: Avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleksij Rempel <[email protected]>
commit d0c3601f2c4e12e7689b0f46ebc17525250ea8c3 upstream.
A boot delay was introduced by commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node"). This delay was caused by the call to mdiobus_register() in cases where a fixed-link PHY was present. The MDIO bus registration triggered unnecessary PHY address scans, leading to a 20-second delay due to attempts to detect Clause 45 (C45) compatible PHYs, despite no MDIO bus being attached.
The commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node") was originally introduced to fix a regression caused by commit 7897b071ac3b4 ("net: macb: convert to phylink"), which caused the driver to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings like:mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0
...mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31
This patch reworks the logic to avoid registering and allocation of the MDIO bus when:
- The device tree contains a fixed-link node.
- There is no "mdio" child node in the device tree.
If a child node named "mdio" exists, the MDIO bus will be registered to support PHYs attached to the MACB's MDIO bus. Otherwise, with only a fixed-link, the MDIO bus is skipped.
Tested on a sama5d35 based system with a ksz8863 switch attached to macb0.
--- drivers/net/ethernet/cadence/macb_main.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/net/ethernet/cadence/macb_main.c +11 -3
@@ -878,9 +878,6 @@ static int macb_mdiobus_register(structreturn ret; } -if (of_phy_is_fixed_link (np)) -return mdiobus_register (bp->mii_bus); -/* Only create the PHY from the device tree if at least one PHY is * described. Otherwise scan the entire MDIO bus. We do this to support * old device tree that did not follow the best practices and did not
@@ -901,8 +898,19 @@ static int macb_mdiobus_register(structstatic int macb_mii_init (struct macb *bp) { +struct device_node *child, *np = bp->pdev->dev.of_node;int err = -ENXIO ; +/* With fixed-link, we don't need to register the MDIO bus, +* except if we have a child named "mdio" in the device tree. +* In that case, some devices may be attached to the MACB's MDIO bus. +*/ + child =of_get_child_by_name (np,"mdio" ); +if (child) +of_node_put (child); +else if (of_phy_is_fixed_link (np)) +return macb_mii_probe (bp->dev); +/* Enable management port */ macb_writel (bp,NCR ,MACB_BIT (MPE ));
Greg Kroah-Hartman
maintainerPATCH 31/91 irqchip/gic-v3-its: Fix VSYNC referencing an unmapped VPE on GIC v4.1
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nianyao Tang <[email protected]>
commit 80e9963fb3b5509dfcabe9652d56bf4b35542055 upstream.
As per the GICv4.1 spec (Arm IHI 0069H, 5.3.19):
"A VMAPP with {V, Alloc}=={0, x} is self-synchronizing, This means the ITS
command queue does not show the command as consumed until all of its effects are completed."
Furthermore, VSYNC is allowed to deliver an SError when referencing a non existent VPE.
By these definitions, a VMAPP followed by a VSYNC is a bug, as the later references a VPE that has been unmapped by the former.
Fix it by eliding the VSYNC in this scenario.
--- drivers/irqchip/irq-gic-v3-its.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/irqchip/irq-gic-v3-its.c +7 -1
@@ -783,6 +783,7 @@ static struct its_vpe *its_build_vmapp_cstruct its_cmd_block *cmd, struct its_cmd_desc *desc) { + struct its_vpe *vpe = valid_vpe(its, desc->its_vmapp_cmd.vpe);unsigned long vpt_addr, vconf_addr;u64 target;bool alloc;
@@ -795,6 +796,11 @@ static struct its_vpe *its_build_vmapp_cif (is_v4_1 (its)) { alloc = !atomic_dec_return (&desc->its_vmapp_cmd.vpe->vmapp_count);its_encode_alloc (cmd, alloc); +/* +* Unmapping a VPE is self-synchronizing on GICv4.1, +* no need to issue a VSYNC. +*/ + vpe =NULL ; } goto out;
@@ -829,7 +835,7 @@ static struct its_vpe *its_build_vmapp_c out:its_fixup_cmd (cmd); -return valid_vpe (its, desc->its_vmapp_cmd.vpe); +return vpe; } static struct its_vpe *its_build_vmapti_cmd(struct its_node *its,
Greg Kroah-Hartman
maintainerPATCH 32/91 fat: fix uninitialized variable
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: OGAWA Hirofumi <[email protected]>
commit 963a7f4d3b90ee195b895ca06b95757fcba02d1a upstream.
syszbot produced this with a corrupted fs image. In theory, however an IO error would trigger this also.
This affects just an error report, so should not be a serious error.
--- fs/fat/namei_vfat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/fat/namei_vfat.c +1 -1
@@ -1037,7 +1037,7 @@ error_inode:if (corrupt <0 ) {fat_fs_error (new_dir->i_sb,"%s: Filesystem corrupted (i_pos %lld)" , - __func__, sinfo.i_pos); + __func__, new_i_pos); } goto out; }
Greg Kroah-Hartman
maintainerPATCH 33/91 mm/swapfile: skip HugeTLB pages for unuse_vma
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Shixin <[email protected]>
commit 7528c4fb1237512ee18049f852f014eba80bbe8d upstream.
I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The problem can be reproduced by the following steps:
1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:
mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)
We can tell that pud_clear_bad is called by pud_none_or_clear_bad in unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never be freed because we lost it from page table. We can skip HugeTLB pages for unuse_vma to fix it.
--- mm/swapfile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
mm/swapfile.c +1 -1
@@ -2006,7 +2006,7 @@ static int unuse_mm(struct mm_struct *mmmmap_read_lock (mm);for_each_vma (vmi, vma) { -if (vma->anon_vma) { +if (vma->anon_vma && !is_vm_hugetlb_page (vma)) { ret =unuse_vma (vma, type);if (ret)break ;
Greg Kroah-Hartman
maintainerPATCH 34/91 devlink: drop the filter argument from devlinks_xa_find_get
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski <[email protected]>
commit 8861c0933c78e3631fe752feadc0d2a6e5eab1e1 upstream.
Looks like devlinks_xa_find_get() was intended to get the mark from the @filter argument. It doesn't actually use @filter, passing DEVLINK_REGISTERED to xa_find_fn() directly. Walking marks other than registered is unlikely so drop @filter argument completely.
Stable-dep-of: d77278196441 ("devlink: bump the instance index directly when iterating")
--- net/devlink/leftover.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-)
net/devlink/leftover.c +8 -13
@@ -289,7 +289,7 @@ void devl_unlock(struct devlink *devlinkEXPORT_SYMBOL_GPL (devl_unlock);static struct devlink * -devlinks_xa_find_get (struct net *net,unsigned long *indexp,xa_mark_t filter, +devlinks_xa_find_get (struct net *net,unsigned long *indexp,void * (*xa_find_fn)(struct xarray *,unsigned long *,unsigned long ,xa_mark_t )) {
@@ -322,30 +322,25 @@ unlock: }static struct devlink *devlinks_xa_find_get_first (struct net *net, -unsigned long *indexp, -xa_mark_t filter) +unsigned long *indexp) { -return devlinks_xa_find_get (net, indexp, filter, xa_find); +return devlinks_xa_find_get (net, indexp, xa_find); }static struct devlink *devlinks_xa_find_get_next (struct net *net, -unsigned long *indexp, -xa_mark_t filter) +unsigned long *indexp) { -return devlinks_xa_find_get (net, indexp, filter, xa_find_after); +return devlinks_xa_find_get (net, indexp, xa_find_after); }/* Iterate over devlink pointers which were possible to get reference to. * devlink_put() needs to be called for each iterated devlink pointer * in loop body in order to release the reference. */ -#define devlinks_xa_for_each_get (net, index, devlink, filter) \ - for (index = 0, \ - devlink = devlinks_xa_find_get_first(net, &index, filter); \ - devlink; devlink = devlinks_xa_find_get_next(net, &index, filter)) -#define devlinks_xa_for_each_registered_get (net, index, devlink) \ - devlinks_xa_for_each_get(net, index, devlink, DEVLINK_REGISTERED) + for (index = 0, \ + devlink = devlinks_xa_find_get_first(net, &index); \ + devlink; devlink = devlinks_xa_find_get_next(net, &index))static struct devlink *devlink_get_from_attrs (struct net *net,struct nlattr **attrs)
Greg Kroah-Hartman
maintainerPATCH 35/91 devlink: bump the instance index directly when iterating
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski <[email protected]>
commit d772781964415c63759572b917e21c4f7ec08d9f upstream.
xa_find_after() is designed to handle multi-index entries correctly. If a xarray has two entries one which spans indexes 0-3 and one at index 4 xa_find_after(0) will return the entry at index 4.
Having to juggle the two callbacks, however, is unnecessary in case of the devlink xarray, as there is 1:1 relationship with indexes.
Always use xa_find() and increment the index manually.
--- net/devlink/leftover.c | 35 ++++++++++------------------------- 1 file changed, 10 insertions(+), 25 deletions(-)
net/devlink/leftover.c +10 -25
@@ -289,15 +289,13 @@ void devl_unlock(struct devlink *devlinkEXPORT_SYMBOL_GPL (devl_unlock);static struct devlink * -devlinks_xa_find_get (struct net *net,unsigned long *indexp, -void * (*xa_find_fn)(struct xarray *,unsigned long *, -unsigned long ,xa_mark_t )) +devlinks_xa_find_get (struct net *net,unsigned long *indexp) { -struct devlink *devlink; +struct devlink *devlink =NULL ;rcu_read_lock (); retry: - devlink =xa_find_fn (&devlinks, indexp,ULONG_MAX ,DEVLINK_REGISTERED ); + devlink =xa_find (&devlinks, indexp,ULONG_MAX ,DEVLINK_REGISTERED );if (!devlink) goto unlock;
@@ -306,31 +304,20 @@ retry:* This prevents live-lock of devlink_unregister() wait for completion. */ if (xa_get_mark (&devlinks, *indexp,DEVLINK_UNREGISTERING )) - goto retry; + goto next; -/* For a possible retry, the xa_find_after() should be always used */ - xa_find_fn = xa_find_after;if (!devlink_try_get (devlink)) - goto retry; + goto next;if (!net_eq (devlink_net (devlink), net)) {devlink_put (devlink); - goto retry; + goto next; } unlock:rcu_read_unlock ();return devlink; -} - -static struct devlink *devlinks_xa_find_get_first (struct net *net, -unsigned long *indexp) -{ -return devlinks_xa_find_get (net, indexp, xa_find); -} - -static struct devlink *devlinks_xa_find_get_next (struct net *net, -unsigned long *indexp) -{ -return devlinks_xa_find_get (net, indexp, xa_find_after); +next: + (*indexp)++; + goto retry; }/* Iterate over devlink pointers which were possible to get reference to.
@@ -338,9 +325,7 @@ static struct devlink *devlinks_xa_find_* in loop body in order to release the reference. */ #define devlinks_xa_for_each_registered_get (net, index, devlink) \ - for (index = 0, \ - devlink = devlinks_xa_find_get_first(net, &index); \ - devlink; devlink = devlinks_xa_find_get_next(net, &index)) + for (index = 0; (devlink = devlinks_xa_find_get(net, &index)); index++)static struct devlink *devlink_get_from_attrs (struct net *net,struct nlattr **attrs)
Greg Kroah-Hartman
maintainerPATCH 36/91 maple_tree: correct tree corruption on spanning store
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lorenzo Stoakes <[email protected]>
commit bea07fd63192b61209d48cbb81ef474cc3ee4c62 upstream.
Patch series "maple_tree: correct tree corruption on spanning store", v3.
There has been a nasty yet subtle maple tree corruption bug that appears to have been in existence since the inception of the algorithm.
This bug seems far more likely to happen since commit f8d112a4e657 ("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point at which reports started to be submitted concerning this bug.
We were made definitely aware of the bug thanks to the kind efforts of Bert Karwatzki who helped enormously in my being able to track this down and identify the cause of it.
The bug arises when an attempt is made to perform a spanning store across two leaf nodes, where the right leaf node is the rightmost child of the shared parent, AND the store completely consumes the right-mode node.
This results in mas_wr_spanning_store() mitakenly duplicating the new and existing entries at the maximum pivot within the range, and thus maple tree corruption.
The fix patch corrects this by detecting this scenario and disallowing the mistaken duplicate copy.
The fix patch commit message goes into great detail as to how this occurs.
This series also includes a test which reliably reproduces the issue, and asserts that the fix works correctly.
Bert has kindly tested the fix and confirmed it resolved his issues. Also Mikhail Gavrilov kindly reported what appears to be precisely the same bug, which this fix should also resolve.
This patch (of 2):
There has been a subtle bug present in the maple tree implementation from its inception.
This arises from how stores are performed - when a store occurs, it will overwrite overlapping ranges and adjust the tree as necessary to accommodate this.
A range may always ultimately span two leaf nodes. In this instance we walk the two leaf nodes, determine which elements are not overwritten to the left and to the right of the start and end of the ranges respectively and then rebalance the tree to contain these entries and the newly inserted one.
This kind of store is dubbed a 'spanning store' and is implemented by mas_wr_spanning_store().
In order to reach this stage, mas_store_gfp() invokes mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to walk the tree and update the object (mas) to traverse to the location where the write should be performed, determining its store type.
When a spanning store is required, this function returns false stopping at the parent node which contains the target range, and mas_wr_store_type() marks the mas->store_type as wr_spanning_store to denote this fact.
When we go to perform the store in mas_wr_spanning_store(), we first determine the elements AFTER the END of the range we wish to store (that is, to the right of the entry to be inserted) - we do this by walking to the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we have just determined contains the range over which we intend to write.
We then turn our attention to the entries to the left of the entry we are inserting, whose state is represented by l_mas, and copy these into a 'big node', which is a special node which contains enough slots to contain two leaf node's worth of data.
We then copy the entry we wish to store immediately after this - the copy and the insertion of the new entry is performed by mas_store_b_node().
After this we copy the elements to the right of the end of the range which we are inserting, if we have not exceeded the length of the node (i.e. r_mas.offset <= r_mas.end).
Herein lies the bug - under very specific circumstances, this logic can break and corrupt the maple tree.
Consider the following tree:
Height
0 Root Node
/ \
pivot = 0xffff / \ pivot = ULONG_MAX
/ \
1 A [-----] ...
/ \
pivot = 0x4fff / \ pivot = 0xffff
/ \
2 (LEAVES) B [-----] [-----] C
^--- Last pivot 0xffff.Now imagine we wish to store an entry in the range [0x4000, 0xffff] (note that all ranges expressed in maple tree code are inclusive):
1. mas_store_gfp() descends the tree, finds node A at <=0xffff, then determines that this is a spanning store across nodes B and C. The mas state is set such that the current node from which we traverse further is node A.
2. In mas_wr_spanning_store() we try to find elements to the right of pivot 0xffff by searching for an index of 0x10000:
- mas_wr_walk_index() invokes mas_wr_walk_descend() and mas_wr_node_walk() in turn.
- mas_wr_node_walk() loops over entries in node A until EITHER it finds an entry whose pivot equals or exceeds 0x10000 OR it reaches the final entry.
- Since no entry has a pivot equal to or exceeding 0x10000, pivot 0xffff is selected, leading to node C.
- mas_wr_walk_traverse() resets the mas state to traverse node C. We loop around and invoke mas_wr_walk_descend() and mas_wr_node_walk() in turn once again.
- Again, we reach the last entry in node C, which has a pivot of 0xffff.
3. We then copy the elements to the left of 0x4000 in node B to the big node via mas_store_b_node(), and insert the new [0x4000, 0xffff] entry too.
4. We determine whether we have any entries to copy from the right of the end of the range via - and with r_mas set up at the entry at pivot 0xffff, r_mas.offset <= r_mas.end, and then we DUPLICATE the entry at pivot 0xffff.
5. BUG! The maple tree is corrupted with a duplicate entry.
This requires a very specific set of circumstances - we must be spanning the last element in a leaf node, which is the last element in the parent node.
spanning store across two leaf nodes with a range that ends at that shared pivot.
A potential solution to this problem would simply be to reset the walk each time we traverse r_mas, however given the rarity of this situation it seems that would be rather inefficient.
Instead, this patch detects if the right hand node is populated, i.e. has anything we need to copy.
We do so by only copying elements from the right of the entry being inserted when the maximum value present exceeds the last, rather than basing this on offset position.
The patch also updates some comments and eliminates the unused bool return value in mas_wr_walk_index().
The work performed in commit f8d112a4e657 ("mm/mmap: avoid zeroing vma tree in mmap_region()") seems to have made the probability of this event much more likely, which is the point at which reports started to be submitted concerning this bug.
The motivation for this change arose from Bert Karwatzki's report of encountering mm instability after the release of kernel v6.12-rc1 which, after the use of CONFIG_DEBUG_VM_MAPLE_TREE and similar configuration options, was identified as maple tree corruption.
After Bert very generously provided his time and ability to reproduce this event consistently, I was able to finally identify that the issue discussed in this commit message was occurring for him.
--- lib/maple_tree.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
lib/maple_tree.c +6 -6
@@ -2298,6 +2298,8 @@ static inline struct maple_enode *mte_no/* * mas_wr_node_walk() - Find the correct offset for the index in the @mas. +* If @mas->index cannot be found within the containing +* node, we traverse to the last entry in the node. * @wr_mas: The maple write state * * Uses mas_slot_locked() and does not need to worry about dead nodes.
@@ -3831,7 +3833,7 @@ static bool mas_wr_walk(struct ma_wr_stareturn true; } -static bool mas_wr_walk_index (struct ma_wr_state *wr_mas) +static void mas_wr_walk_index (struct ma_wr_state *wr_mas) {struct ma_state *mas = wr_mas->mas;
@@ -3840,11 +3842,9 @@ static bool mas_wr_walk_index(struct ma_ wr_mas->content =mas_slot_locked (mas, wr_mas->slots, mas->offset);if (ma_is_leaf (wr_mas->type)) -return true; +return ;mas_wr_walk_traverse (wr_mas); - } -return true; }/* * mas_extend_spanning_null() - Extend a store of a %NULL to include surrounding %NULLs.
@@ -4081,8 +4081,8 @@ static inline int mas_wr_spanning_store(memset (&b_node,0 ,sizeof (struct maple_big_node ));/* Copy l_mas and store the value in b_node. */ mas_store_b_node (&l_wr_mas, &b_node, l_wr_mas.node_end); -/* Copy r_mas into b_node. */ -if (r_mas.offset <= r_wr_mas.node_end) +/* Copy r_mas into b_node if there is anything to copy. */ +if (r_mas.max > r_mas.last)mas_mab_cp (&r_mas, r_mas.offset, r_wr_mas.node_end, &b_node, b_node.b_end +1 );else
Greg Kroah-Hartman
maintainerPATCH 37/91 drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE)
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wachowski, Karol <[email protected]>
commit 39bc27bd688066a63e56f7f64ad34fae03fbe3b8 upstream.
Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot:BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
Return -EINVAL early if COW mapping is detected.
This bug affects all drm drivers using default shmem helpers. It can be reproduced by this simple example:
void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset); ptr[0] = 0;
[ Sherry: bp to fix CVE-2024-39497, ignore context change due to missing
commit 21aa27ddc582 ("drm/shmem-helper: Switch to reservation lock") ]
--- drivers/gpu/drm/drm_gem_shmem_helper.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/drm_gem_shmem_helper.c +3 -0
@@ -638,6 +638,9 @@ int drm_gem_shmem_mmap(struct drm_gem_shreturn ret; } +if (is_cow_mapping (vma->vm_flags)) +return -EINVAL ; + ret =drm_gem_shmem_get_pages (shmem);if (ret)return ret;
Greg Kroah-Hartman
maintainerPATCH 38/91 iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lu Baolu <[email protected]>
commit 6e02a277f1db24fa039e23783c8921c7b0e5b1b3 upstream.
Previously, the domain_context_clear() function incorrectly called pci_for_each_dma_alias() to set up context entries for non-PCI devices. This could lead to kernel hangs or other unexpected behavior.
Add a check to only call pci_for_each_dma_alias() for PCI devices. For non-PCI devices, domain_context_clear_one() is called directly.
--- drivers/iommu/intel/iommu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/iommu/intel/iommu.c +3 -1
@@ -4090,8 +4090,10 @@ static int domain_context_clear_one_cb(s*/ static void domain_context_clear (struct device_domain_info *info) { -if (!dev_is_pci (info->dev)) +if (!dev_is_pci (info->dev)) {domain_context_clear_one (info, info->bus, info->devfn); +return ; + }pci_for_each_dma_alias (to_pci_dev (info->dev), &domain_context_clear_one_cb, info);
Greg Kroah-Hartman
maintainerPATCH 39/91 s390/sclp: Deactivate sclp after all its users
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Weißschuh <[email protected]>
commit 0d9dc27df22d9b5c8dc7185c8dddbc14f5468518 upstream.
On reboot the SCLP interface is deactivated through a reboot notifier. This happens before other components using SCLP have the chance to run their own reboot notifiers.
Two of those components are the SCLP console and tty drivers which try to flush the last outstanding messages.
At that point the SCLP interface is already unusable and the messages are discarded.
Execute sclp_deactivate() as late as possible to avoid this issue.
--- drivers/s390/char/sclp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/s390/char/sclp.c +2 -1
@@ -1200,7 +1200,8 @@ sclp_reboot_event(struct notifier_block }static struct notifier_block sclp_reboot_notifier = { - .notifier_call = sclp_reboot_event + .notifier_call = sclp_reboot_event, + .priority =INT_MIN , };static ssize_t con_pages_show (struct device_driver *dev,char *buf)
Greg Kroah-Hartman
maintainerPATCH 40/91 s390/sclp_vt220: Convert newlines to CRLF instead of LFCR
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Weißschuh <[email protected]>
commit dee3df68ab4b00fff6bdf9fc39541729af37307c upstream.
According to the VT220 specification the possible character combinations sent on RETURN are only CR or CRLF [0].
The Return key sends either a CR character (0/13) or a CR character (0/13) and an LF character (0/10), depending on the set/reset state of line feed/new line mode (LNM).
The sclp/vt220 driver however uses LFCR. This can confuse tools, for example the kunit runner.
--- drivers/s390/char/sclp_vt220.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/s390/char/sclp_vt220.c +2 -2
@@ -319,7 +319,7 @@ sclp_vt220_add_msg(struct sclp_vt220_req buffer = (void *) ((addr_t ) sccb + sccb->header.length);if (convertlf) { -/* Perform Linefeed conversion (0x0a -> 0x0a 0x0d)*/ +/* Perform Linefeed conversion (0x0a -> 0x0d 0x0a)*/ for (from=0 , to=0 ; (from < count) && (to <sclp_vt220_space_left (request)); from++) {
@@ -328,8 +328,8 @@ sclp_vt220_add_msg(struct sclp_vt220_req/* Perform conversion */ if (c ==0x0a ) {if (to +1 <sclp_vt220_space_left (request)) { - ((unsigned char *) buffer)[to++] = c; ((unsigned char *) buffer)[to++] =0x0d ; + ((unsigned char *) buffer)[to++] = c; }else break ;
Greg Kroah-Hartman
maintainerPATCH 41/91 KVM: s390: gaccess: Check if guest address is in memslot
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nico Boehr <[email protected]>
commit e8061f06185be0a06a73760d6526b8b0feadfe52 upstream.
Previously, access_guest_page() did not check whether the given guest address is inside of a memslot. This is not a problem, since kvm_write_guest_page/kvm_read_guest_page return -EFAULT in this case.
However, -EFAULT is also returned when copy_to/from_user fails.
When emulating a guest instruction, the address being outside a memslot usually means that an addressing exception should be injected into the guest.
Failure in copy_to/from_user however indicates that something is wrong in userspace and hence should be handled there.
To be able to distinguish these two cases, return PGM_ADDRESSING in access_guest_page() when the guest address is outside guest memory. In access_guest_real(), populate vcpu->arch.pgm.code such that kvm_s390_inject_prog_cond() can be used in the caller for injecting into the guest (if applicable).
Since this adds a new return value to access_guest_page(), we need to make sure that other callers are not confused by the new positive return value.
There are the following users of access_guest_page():
- access_guest_with_key() does the checking itself (in guest_range_to_gpas()), so this case should never happen. Even if, the handling is set up properly.
- access_guest_real() just passes the return code to its callers, which are:
- read_guest_real() - see below
- write_guest_real() - see below
There are the following users of read_guest_real():
- ar_translation() in gaccess.c which already returns PGM_*
- setup_apcb10(), setup_apcb00(), setup_apcb11() in vsie.c which always return -EFAULT on read_guest_read() nonzero return - no change
- shadow_crycb(), handle_stfle() always present this as validity, this could be handled better but doesn't change current behaviour - no change
There are the following users of write_guest_real():
- kvm_s390_store_status_unloaded() always returns -EFAULT on write_guest_real() failure.
--- arch/s390/kvm/gaccess.c | 4 ++++ arch/s390/kvm/gaccess.h | 14 ++++++++------ 2 files changed, 12 insertions(+), 6 deletions(-)
arch/s390/kvm/gaccess.c +4 -0
@@ -1001,6 +1001,8 @@ static int access_guest_page(struct kvmconst gfn_t gfn =gpa_to_gfn (gpa);int rc; +if (!gfn_to_memslot (kvm, gfn)) +return PGM_ADDRESSING ;if (mode ==GACC_STORE ) rc =kvm_write_guest_page (kvm, gfn, data, offset, len);else
@@ -1158,6 +1160,8 @@ int access_guest_real(struct kvm_vcpu *v gra += fragment_len; data += fragment_len; } +if (rc >0 ) + vcpu->arch.pgm.code = rc;return rc; }
arch/s390/kvm/gaccess.h +8 -6
@@ -402,11 +402,12 @@ int read_guest_abs(struct kvm_vcpu *vcpu* @len: number of bytes to copy * * Copy @len bytes from @data (kernel space) to @gra (guest real address). -* It is up to the caller to ensure that the entire guest memory range is -* valid memory before calling this function. * Guest low address and key protection are not checked. * -* Returns zero on success or -EFAULT on error. +* Returns zero on success, -EFAULT when copying from @data failed, or +* PGM_ADRESSING in case @gra is outside a memslot. In this case, pgm check info +* is also stored to allow injecting into the guest (if applicable) using +* kvm_s390_inject_prog_cond(). * * If an error occurs data may have been copied partially to guest memory. */
@@ -425,11 +426,12 @@ int write_guest_real(struct kvm_vcpu *vc* @len: number of bytes to copy * * Copy @len bytes from @gra (guest real address) to @data (kernel space). -* It is up to the caller to ensure that the entire guest memory range is -* valid memory before calling this function. * Guest key protection is not checked. * -* Returns zero on success or -EFAULT on error. +* Returns zero on success, -EFAULT when copying to @data failed, or +* PGM_ADRESSING in case @gra is outside a memslot. In this case, pgm check info +* is also stored to allow injecting into the guest (if applicable) using +* kvm_s390_inject_prog_cond(). * * If an error occurs data may have been copied partially to kernel space. */
Greg Kroah-Hartman
maintainerPATCH 42/91 KVM: s390: Change virtual to physical address access in diag 0x258 handler
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Mueller <[email protected]>
commit cad4b3d4ab1f062708fff33f44d246853f51e966 upstream.
The parameters for the diag 0x258 are real addresses, not virtual, but KVM was using them as virtual addresses. This only happened to work, since the Linux kernel as a guest used to have a 1:1 mapping for physical vs virtual addresses.
Fix KVM so that it correctly uses the addresses as real addresses.
--- arch/s390/kvm/diag.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/s390/kvm/diag.c +1 -1
@@ -77,7 +77,7 @@ static int __diag_page_ref_service(struc vcpu->stat.instruction_diagnose_258++;if (vcpu->run->s.regs.gprs[rx] &7 )return kvm_s390_inject_program_int (vcpu,PGM_SPECIFICATION ); - rc =read_guest (vcpu, vcpu->run->s.regs.gprs[rx], rx, &parm,sizeof (parm)); + rc =read_guest_real (vcpu, vcpu->run->s.regs.gprs[rx], &parm,sizeof (parm));if (rc)return kvm_s390_inject_prog_cond (vcpu, rc);if (parm.parm_version !=2 || parm.parm_len <5 || parm.code !=0x258 )
Greg Kroah-Hartman
maintainerPATCH 43/91 x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jim Mattson <[email protected]>
commit ff898623af2ed564300752bba83a680a1e4fec8d upstream.
AMD's initial implementation of IBPB did not clear the return address predictor. Beginning with Zen4, AMD's IBPB *does* clear the return address predictor. This behavior is enumerated by CPUID.80000008H:EBX.IBPB_RET[30].
Define X86_FEATURE_AMD_IBPB_RET for use in KVM_GET_SUPPORTED_CPUID, when determining cross-vendor capabilities.
--- arch/x86/include/asm/cpufeatures.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/include/asm/cpufeatures.h +2 -1
@@ -217,7 +217,7 @@#define X86_FEATURE_SPEC_STORE_BYPASS_DISABLE ( 7*32+23)/* "" Disable Speculative Store Bypass. */ #define X86_FEATURE_LS_CFG_SSBD ( 7*32+24)/* "" AMD SSBD implementation via LS_CFG MSR */ #define X86_FEATURE_IBRS ( 7*32+25)/* Indirect Branch Restricted Speculation */ -#define X86_FEATURE_IBPB ( 7*32+26)/* Indirect Branch Prediction Barrier */ +#define X86_FEATURE_IBPB ( 7*32+26)/* "ibpb" Indirect Branch Prediction Barrier without a guaranteed RSB flush */ #define X86_FEATURE_STIBP ( 7*32+27)/* Single Thread Indirect Branch Predictors */ #define X86_FEATURE_ZEN (7*32+28)/* "" CPU based on Zen microarchitecture */ #define X86_FEATURE_L1TF_PTEINV ( 7*32+29)/* "" L1TF workaround PTE inversion */
@@ -332,6 +332,7 @@#define X86_FEATURE_AMD_SSB_NO (13*32+26)/* "" Speculative Store Bypass is fixed in hardware. */ #define X86_FEATURE_CPPC (13*32+27)/* Collaborative Processor Performance Control */ #define X86_FEATURE_BTC_NO (13*32+29)/* "" Not vulnerable to Branch Type Confusion */ +#define X86_FEATURE_AMD_IBPB_RET (13*32+30)/* "" IBPB clears return address predictor */ #define X86_FEATURE_BRS (13*32+31)/* Branch Sampling available */ /* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */
Greg Kroah-Hartman
maintainerPATCH 44/91 x86/cpufeatures: Add a IBPB_NO_RET BUG flag
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Wikner <[email protected]>
commit 3ea87dfa31a7b0bb0ff1675e67b9e54883013074 upstream.
Set this flag if the CPU has an IBPB implementation that does not invalidate return target predictions. Zen generations < 4 do not flush the RSB when executing an IBPB and this bug flag denotes that.
[ bp: Massage. ]
--- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/kernel/cpu/common.c | 3 +++ 2 files changed, 4 insertions(+)
arch/x86/include/asm/cpufeatures.h +1 -0
@@ -493,4 +493,5 @@#define X86_BUG_DIV0 X86_BUG(1*32 + 1)/* AMD DIV0 speculation bug */ #define X86_BUG_RFDS X86_BUG(1*32 + 2)/* CPU is vulnerable to Register File Data Sampling */ #define X86_BUG_BHI X86_BUG(1*32 + 3)/* CPU is affected by Branch History Injection */ +#define X86_BUG_IBPB_NO_RET X86_BUG(1*32 + 4)/* "ibpb_no_ret" IBPB omits return target predictions */ #endif /* _ASM_X86_CPUFEATURES_H */
arch/x86/kernel/cpu/common.c +3 -0
@@ -1462,6 +1462,9 @@ static void __init cpu_set_bug_bits(stru boot_cpu_has(X86_FEATURE_HYPERVISOR)))setup_force_cpu_bug (X86_BUG_BHI ); +if (cpu_has (c,X86_FEATURE_AMD_IBPB ) && !cpu_has (c,X86_FEATURE_AMD_IBPB_RET )) +setup_force_cpu_bug (X86_BUG_IBPB_NO_RET ); +if (cpu_matches (cpu_vuln_whitelist,NO_MELTDOWN ))return ;
Greg Kroah-Hartman
maintainerPATCH 45/91 x86/entry: Have entry_ibpb() invalidate return predictions
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Wikner <[email protected]>
commit 50e4b3b94090babe8d4bb85c95f0d3e6b07ea86e upstream.
entry_ibpb() should invalidate all indirect predictions, including return target predictions. Not all IBPB implementations do this, in which case the fallback is RSB filling.
Prevent SRSO-style hijacks of return predictions following IBPB, as the return target predictor can be corrupted before the IBPB completes.
[ bp: Massage. ]
--- arch/x86/entry/entry.S | 5 +++++ 1 file changed, 5 insertions(+)
arch/x86/entry/entry.S +5 -0
@@ -9,6 +9,8 @@ #include <asm/unwind_hints.h> #include <asm/segment.h> #include <asm/cache.h> +#include <asm/cpufeatures.h> +#include <asm/nospec-branch.h> .pushsection .noinstr.text, "ax"
@@ -17,6 +19,9 @@ SYM_FUNC_START(entry_ibpb) movl $PRED_CMD_IBPB, %eax xorl %edx, %edx wrmsr + + /* Make sure IBPB clears return stack preductions too. */ + FILL_RETURN_BUFFER %rax, RSB_CLEAR_LOOPS, X86_BUG_IBPB_NO_RET RET SYM_FUNC_END(entry_ibpb) /* For KVM */
Greg Kroah-Hartman
maintainerPATCH 46/91 x86/bugs: Skip RSB fill at VMEXIT
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Wikner <[email protected]>
commit 0fad2878642ec46225af2054564932745ac5c765 upstream.
entry_ibpb() is designed to follow Intel's IBPB specification regardless of CPU. This includes invalidating RSB entries.
Hence, if IBPB on VMEXIT has been selected, entry_ibpb() as part of the RET untraining in the VMEXIT path will take care of all BTB and RSB clearing so there's no need to explicitly fill the RSB anymore.
[ bp: Massage commit message. ]
--- arch/x86/kernel/cpu/bugs.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/x86/kernel/cpu/bugs.c +15 -0
@@ -1093,6 +1093,14 @@ do_cmd_auto:case RETBLEED_MITIGATION_IBPB :setup_force_cpu_cap (X86_FEATURE_ENTRY_IBPB ); mitigate_smt = true; + +/* +* There is no need for RSB filling: entry_ibpb() ensures +* all predictions, including the RSB, are invalidated, +* regardless of IBPB implementation. +*/ +setup_clear_cpu_cap (X86_FEATURE_RSB_VMEXIT ); +break ;default :
@@ -2603,6 +2611,13 @@ static void __init srso_select_mitigatioif (!boot_cpu_has (X86_FEATURE_ENTRY_IBPB ) && has_microcode) {setup_force_cpu_cap (X86_FEATURE_IBPB_ON_VMEXIT ); srso_mitigation =SRSO_MITIGATION_IBPB_ON_VMEXIT ; + +/* +* There is no need for RSB filling: entry_ibpb() ensures +* all predictions, including the RSB, are invalidated, +* regardless of IBPB implementation. +*/ +setup_clear_cpu_cap (X86_FEATURE_RSB_VMEXIT ); } }else {pr_err ("WARNING: kernel not compiled with CPU_SRSO.\n" );
Greg Kroah-Hartman
maintainerPATCH 47/91 x86/bugs: Do not use UNTRAIN_RET with IBPB on entry
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Wikner <[email protected]>
commit c62fa117c32bd1abed9304c58e0da6940f8c7fc2 upstream.
Since X86_FEATURE_ENTRY_IBPB will invalidate all harmful predictions with IBPB, no software-based untraining of returns is needed anymore. Currently, this change affects retbleed and SRSO mitigations so if either of the mitigations is doing IBPB and the other one does the software sequence, the latter is not needed anymore.
[ bp: Massage commit message. ]
--- arch/x86/kernel/cpu/bugs.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
arch/x86/kernel/cpu/bugs.c +17 -0
@@ -1092,6 +1092,15 @@ do_cmd_auto:case RETBLEED_MITIGATION_IBPB :setup_force_cpu_cap (X86_FEATURE_ENTRY_IBPB ); + +/* +* IBPB on entry already obviates the need for +* software-based untraining so clear those in case some +* other mitigation like SRSO has selected them. +*/ +setup_clear_cpu_cap (X86_FEATURE_UNRET ); +setup_clear_cpu_cap (X86_FEATURE_RETHUNK ); + mitigate_smt = true;/*
@@ -2599,6 +2608,14 @@ static void __init srso_select_mitigatioif (has_microcode) {setup_force_cpu_cap (X86_FEATURE_ENTRY_IBPB ); srso_mitigation =SRSO_MITIGATION_IBPB ; + +/* +* IBPB on entry already obviates the need for +* software-based untraining so clear those in case some +* other mitigation like Retbleed has selected them. +*/ +setup_clear_cpu_cap (X86_FEATURE_UNRET ); +setup_clear_cpu_cap (X86_FEATURE_RETHUNK ); } }else {pr_err ("WARNING: kernel not compiled with CPU_IBPB_ENTRY.\n" );
Greg Kroah-Hartman
maintainerPATCH 48/91 blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Omar Sandoval <[email protected]>
commit e972b08b91ef48488bae9789f03cfedb148667fb upstream.
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait().
--- block/blk-rq-qos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
block/blk-rq-qos.c +1 -1
@@ -219,8 +219,8 @@ static int rq_qos_wake_function(struct w data->got_token = true;smp_wmb (); -list_del_init (&curr->entry);wake_up_process (data->task); +list_del_init_careful (&curr->entry);return 1 ; }
Greg Kroah-Hartman
maintainerPATCH 49/91 io_uring/sqpoll: close race on waiting for sqring entries
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe <[email protected]>
commit 28aabffae6be54284869a91cd8bccd3720041129 upstream.
When an application uses SQPOLL, it must wait for the SQPOLL thread to consume SQE entries, if it fails to get an sqe when calling io_uring_get_sqe(). It can do so by calling io_uring_enter(2) with the flag value of IORING_ENTER_SQ_WAIT. In liburing, this is generally done with io_uring_sqring_wait(). There's a natural expectation that once this call returns, a new SQE entry can be retrieved, filled out, and submitted. However, the kernel uses the cached sq head to determine if the SQRING is full or not. If the SQPOLL thread is currently in the process of submitting SQE entries, it may have updated the cached sq head, but not yet committed it to the SQ ring. Hence the kernel may find that there are SQE entries ready to be consumed, and return successfully to the application. If the SQPOLL thread hasn't yet committed the SQ ring entries by the time the application returns to userspace and attempts to get a new SQE, it will fail getting a new SQE.
Fix this by having io_sqring_full() always use the user visible SQ ring head entry, rather than the internally cached one.
--- io_uring/io_uring.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
io_uring/io_uring.h +8 -1
@@ -235,7 +235,14 @@ static inline bool io_sqring_full(struct {struct io_rings *r = ctx->rings; -return READ_ONCE (r->sq.tail) - ctx->cached_sq_head == ctx->sq_entries; +/* +* SQPOLL must use the actual sqring head, as using the cached_sq_head +* is race prone if the SQPOLL thread has grabbed entries but not yet +* committed them to the ring. For !SQPOLL, this doesn't matter, but +* since this helper is just used for SQPOLL sqring waits (or POLLOUT), +* just read the actual sqring head unconditionally. +*/ +return READ_ONCE (r->sq.tail) -READ_ONCE (r->sq.head) == ctx->sq_entries; }static inline unsigned int io_sqring_entries (struct io_ring_ctx *ctx)
Greg Kroah-Hartman
maintainerPATCH 50/91 scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seunghwan Baek <[email protected]>
commit 19a198b67767d952c8f3d0cf24eb3100522a8223 upstream.
There is a history of deadlock if reboot is performed at the beginning of booting. SDEV_QUIESCE was set for all LU's scsi_devices by UFS shutdown, and at that time the audio driver was waiting on blk_mq_submit_bio() holding a mutex_lock while reading the fw binary. After that, a deadlock issue occurred while audio driver shutdown was waiting for mutex_unlock of blk_mq_submit_bio(). To solve this, set SDEV_OFFLINE for all LUs except WLUN, so that any I/O that comes down after a UFS shutdown will return an error.
[ 31.907781]I[0: swapper/0: 0] 1 130705007 1651079834 11289729804 0 D( 2) 3 ffffff882e208000 * init [device_shutdown] [ 31.907793]I[0: swapper/0: 0] Mutex: 0xffffff8849a2b8b0: owner[0xffffff882e28cb00 kworker/6:0 :49] [ 31.907806]I[0: swapper/0: 0] Call trace: [ 31.907810]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.907819]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.907826]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.907834]I[0: swapper/0: 0] schedule_preempt_disabled+0x24/0x40 [ 31.907842]I[0: swapper/0: 0] __mutex_lock+0x408/0xdac [ 31.907849]I[0: swapper/0: 0] __mutex_lock_slowpath+0x14/0x24 [ 31.907858]I[0: swapper/0: 0] mutex_lock+0x40/0xec [ 31.907866]I[0: swapper/0: 0] device_shutdown+0x108/0x280 [ 31.907875]I[0: swapper/0: 0] kernel_restart+0x4c/0x11c [ 31.907883]I[0: swapper/0: 0] __arm64_sys_reboot+0x15c/0x280 [ 31.907890]I[0: swapper/0: 0] invoke_syscall+0x70/0x158 [ 31.907899]I[0: swapper/0: 0] el0_svc_common+0xb4/0xf4 [ 31.907909]I[0: swapper/0: 0] do_el0_svc+0x2c/0xb0 [ 31.907918]I[0: swapper/0: 0] el0_svc+0x34/0xe0 [ 31.907928]I[0: swapper/0: 0] el0t_64_sync_handler+0x68/0xb4 [ 31.907937]I[0: swapper/0: 0] el0t_64_sync+0x1a0/0x1a4
[ 31.908774]I[0: swapper/0: 0] 49 0 11960702 11236868007 0 D( 2) 6 ffffff882e28cb00 * kworker/6:0 [__bio_queue_enter] [ 31.908783]I[0: swapper/0: 0] Call trace: [ 31.908788]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.908796]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.908803]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.908811]I[0: swapper/0: 0] __bio_queue_enter+0xb8/0x178 [ 31.908818]I[0: swapper/0: 0] blk_mq_submit_bio+0x194/0x67c [ 31.908827]I[0: swapper/0: 0] __submit_bio+0xb8/0x19c
--- drivers/ufs/core/ufshcd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/ufs/core/ufshcd.c +3 -1
@@ -9396,7 +9396,9 @@ static void ufshcd_wl_shutdown(struct deshost_for_each_device (sdev, hba->host) {if (sdev == hba->ufs_device_wlun)continue ; -scsi_device_quiesce (sdev); +mutex_lock (&sdev->state_mutex); +scsi_device_set_state (sdev,SDEV_OFFLINE ); +mutex_unlock (&sdev->state_mutex); }__ufshcd_wl_suspend (hba,UFS_SHUTDOWN_PM ); }
Greg Kroah-Hartman
maintainerPATCH 51/91 drm/radeon: Fix encoder->possible_clones
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <[email protected]>
commit 28127dba64d8ae1a0b737b973d6d029908599611 upstream.
Include the encoder itself in its possible_clones bitmask. In the past nothing validated that drivers were populating possible_clones correctly, but that changed in commit 74d2aacbe840 ("drm: Validate encoder->possible_clones"). Looks like radeon never got the memo and is still not following the rules 100% correctly.
This results in some warnings during driver initialization:
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7)
WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c
...
--- drivers/gpu/drm/radeon/radeon_encoders.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/radeon/radeon_encoders.c +1 -1
@@ -43,7 +43,7 @@ static uint32_t radeon_encoder_clones(ststruct radeon_device *rdev = dev->dev_private;struct radeon_encoder *radeon_encoder =to_radeon_encoder (encoder);struct drm_encoder *clone_encoder; -uint32_t index_mask =0 ; +uint32_t index_mask =drm_encoder_mask (encoder);int count;/* DIG routing gets problematic */
Greg Kroah-Hartman
maintainerPATCH 52/91 drm/vmwgfx: Handle surface check failure correctly
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Kuratov <[email protected]>
commit 26498b8d54373d31a621d7dec95c4bd842563b3b upstream.
Currently if condition (!bo and !vmw_kms_srf_ok()) was met we go to err_out with ret == 0.err_out dereferences vfb if ret == 0, but in our case vfb is still NULL.
Fix this by assigning sensible error to ret.
Found by Linux Verification Center (linuxtesting.org) with SVACE
--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +1 -0
@@ -1591,6 +1591,7 @@ static struct drm_framebuffer *vmw_kms_fDRM_ERROR ("Surface size cannot exceed %dx%d\n" , dev_priv->texture_max_width, dev_priv->texture_max_height); + ret = -EINVAL ; goto err_out; }
Greg Kroah-Hartman
maintainerPATCH 53/91 drm/amdgpu/swsmu: Only force workload setup on init
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit cb07c8338fc2b9d5f949a19d4a07ee4d5ecf8793 upstream.
Needed to set the workload type at init time so that we can apply the navi3x margin optimization.
--- drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +3 -3
@@ -1831,7 +1831,7 @@ static int smu_bump_power_profile_mode(sstatic int smu_adjust_power_state_dynamic (struct smu_context *smu,enum amd_dpm_forced_level level,bool skip_display_settings, -bool force_update) +bool init) {int ret =0 ;int index =0 ;
@@ -1860,7 +1860,7 @@ static int smu_adjust_power_state_dynami } } -if (force_update || smu_dpm_ctx->dpm_level != level) { +if (smu_dpm_ctx->dpm_level != level) { ret =smu_asic_set_performance_level (smu, level);if (ret) {dev_err (smu->adev->dev,"Failed to set performance level!" );
@@ -1877,7 +1877,7 @@ static int smu_adjust_power_state_dynami index = index >0 && index <=WORKLOAD_POLICY_MAX ? index -1 :0 ; workload[0 ] = smu->workload_setting[index]; -if (force_update || smu->power_profile_mode != workload[0 ]) +if (init || smu->power_profile_mode != workload[0 ])smu_bump_power_profile_mode (smu, workload,0 ); }
Greg Kroah-Hartman
maintainerPATCH 54/91 drm/amdgpu: prevent BO_HANDLES error from being overwritten
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mohammed Anees <[email protected]>
commit c0ec082f10b7a1fd25e8c1e2a686440da913b7a3 upstream.
Before this patch, if multiple BO_HANDLES chunks were submitted, the error -EINVAL would be correctly set but could be overwritten by the return value from amdgpu_cs_p1_bo_handles(). This patch ensures that if there are multiple BO_HANDLES, we stop.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +1 -1
@@ -259,7 +259,7 @@ static int amdgpu_cs_pass1(struct amdgpu/* Only a single BO list is allowed to simplify handling. */ if (p->bo_list) - ret = -EINVAL ; + goto free_partial_kdata; ret =amdgpu_cs_p1_bo_handles (p, p->chunks[i].kdata);if (ret)
Greg Kroah-Hartman
maintainerPATCH 55/91 iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit bcdab6f74c91cda19714354fd4e9e3ef3c9a78b3 upstream.
This driver makes use of regmap_spi, but does not select the required module.
Add the missing 'select REGMAP_SPI'.
--- drivers/iio/dac/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/iio/dac/Kconfig +1 -0
@@ -224,6 +224,7 @@ config AD5766 config AD5770R tristate "Analog Devices AD5770R IDAC driver" depends on SPI_MASTER + select REGMAP_SPI help Say yes here to build support for Analog Devices AD5770R Digital to Analog Converter.
Greg Kroah-Hartman
maintainerPATCH 56/91 iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit 252ff06a4cb4e572cb3c7fcfa697db96b08a7781 upstream.
This driver makes use of regmap_spi, but does not select the required module.
Add the missing 'select REGMAP_SPI'.
--- drivers/iio/dac/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/iio/dac/Kconfig +1 -0
@@ -315,6 +315,7 @@ config LPC18XX_DAC config LTC1660 tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver" depends on SPI + select REGMAP_SPI help Say yes here to build support for Linear Technology LTC1660 and LTC1665 Digital to Analog Converters.
Greg Kroah-Hartman
maintainerPATCH 57/91 iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit 27b6aa68a68105086aef9f0cb541cd688e5edea8 upstream.
This driver makes use of regmap_mmio, but does not select the required module.
Add the missing 'select REGMAP_MMIO'.
--- drivers/iio/dac/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/iio/dac/Kconfig +1 -0
@@ -401,6 +401,7 @@ config STM32_DAC config STM32_DAC_CORE tristate + select REGMAP_MMIO config TI_DAC082S085 tristate "Texas Instruments 8/10/12-bit 2/4-channel DAC driver"
Greg Kroah-Hartman
maintainerPATCH 58/91 iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit 4c4834fd8696a949d1b1f1c2c5b96e1ad2083b02 upstream.
This driver makes use of triggered buffers, but does not select the required modules.
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
--- drivers/iio/adc/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
drivers/iio/adc/Kconfig +2 -0
@@ -1193,6 +1193,8 @@ config TI_ADS8344 config TI_ADS8688 tristate "Texas Instruments ADS8688" depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADS8684 and and ADS8688 ADC chips
Greg Kroah-Hartman
maintainerPATCH 59/91 iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
commit 3a29b84cf7fbf912a6ab1b9c886746f02b74ea25 upstream.
If hid_sensor_set_report_latency() fails, the error code should be returned instead of a value likely to be interpreted as 'success'.
--- drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/common/hid-sensors/hid-sensor-trigger.c +1 -1
@@ -32,7 +32,7 @@ static ssize_t _hid_sensor_set_report_la latency = integer *1000 + fract /1000 ; ret =hid_sensor_set_report_latency (attrb, latency);if (ret <0 ) -return len; +return ret; attrb->latency_ms =hid_sensor_get_report_latency (attrb);
Greg Kroah-Hartman
maintainerPATCH 60/91 iio: light: veml6030: fix ALS sensor resolution
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit c9e9746f275c45108f2b0633a4855d65d9ae0736 upstream.
The driver still uses the sensor resolution provided in the datasheet until Rev. 1.6, 28-Apr-2022, which was updated with Rev 1.7, 28-Nov-2023. The original ambient light resolution has been updated from 0.0036 lx/ct to 0.0042 lx/ct, which is the value that can be found in the current device datasheet.
Update the default resolution for IT = 100 ms and GAIN = 1/8 from the original 4608 mlux/cnt to the current value from the "Resolution and maximum detection range" table (Application Note 84367, page 5), 5376 mlux/cnt.
--- drivers/iio/light/veml6030.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/light/veml6030.c +1 -1
@@ -780,7 +780,7 @@ static int veml6030_hw_init(struct iio_d/* Cache currently active measurement parameters */ data->cur_gain =3 ; - data->cur_resolution =4608 ; + data->cur_resolution =5376 ; data->cur_integration_time =3 ;return ret;
Greg Kroah-Hartman
maintainerPATCH 61/91 iio: light: veml6030: fix IIO device retrieval from embedded device
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit c7c44e57750c31de43906d97813273fdffcf7d02 upstream.
The dev pointer that is received as an argument in the in_illuminance_period_available_show function references the device embedded in the IIO device, not in the i2c client.
dev_to_iio_dev() must be used to accessthe right data. The current implementation leads to a segmentation fault on every attempt to read the attribute because indio_dev gets a NULL assignment.
This bug has been present since the first appearance of the driver, apparently since the last version (V6) before getting applied. A constant attribute was used until then, and the last modifications might have not been tested again.
--- drivers/iio/light/veml6030.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/iio/light/veml6030.c +1 -2
@@ -99,9 +99,8 @@ static const char * const period_values[static ssize_t in_illuminance_period_available_show (struct device *dev,struct device_attribute *attr,char *buf) { +struct veml6030_data *data =iio_priv (dev_to_iio_dev (dev));int ret, reg, x; -struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev)); -struct veml6030_data *data =iio_priv (indio_dev); ret =regmap_read (data->regmap,VEML6030_REG_ALS_CONF , ®);if (ret) {
Greg Kroah-Hartman
maintainerPATCH 62/91 iio: light: opt3001: add missing full-scale range value
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emil Gedenryd <[email protected]>
commit 530688e39c644543b71bdd9cb45fdfb458a28eaa upstream.
The opt3001 driver uses predetermined full-scale range values to determine what exponent to use for event trigger threshold values. The problem is that one of the values specified in the datasheet is missing from the implementation. This causes larger values to be scaled down to an incorrect exponent, effectively reducing the maximum settable threshold value by a factor of 2.
Add missing full-scale range array value.
--- drivers/iio/light/opt3001.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/iio/light/opt3001.c +4 -0
@@ -139,6 +139,10 @@ static const struct opt3001_scale opt300 .val2 = 400000, }, { + .val = 41932, + .val2 = 800000, + }, + { .val = 83865, .val2 = 600000, },
Greg Kroah-Hartman
maintainerPATCH 63/91 iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit b7983033a10baa0d98784bb411b2679bfb207d9a upstream.
This driver makes use of regmap_spi, but does not select the required module.
Add the missing 'select REGMAP_SPI'.
--- drivers/iio/amplifiers/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/iio/amplifiers/Kconfig +1 -0
@@ -26,6 +26,7 @@ config AD8366 config ADA4250 tristate "Analog Devices ADA4250 Instrumentation Amplifier" depends on SPI + select REGMAP_SPI help Say yes here to build support for Analog Devices ADA4250 SPI Amplifier's support. The driver provides direct access via
Greg Kroah-Hartman
maintainerPATCH 64/91 iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit 62ec3df342cca6a8eb7ed33fd4ac8d0fbfcb9391 upstream.
This driver makes use of triggered buffers, but does not select the required modules.
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
--- drivers/iio/dac/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
drivers/iio/dac/Kconfig +2 -0
@@ -214,6 +214,8 @@ config AD5764 config AD5766 tristate "Analog Devices AD5766/AD5767 DAC driver" depends on SPI_MASTER + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD5766, AD5767 Digital to Analog Converter.
Greg Kroah-Hartman
maintainerPATCH 65/91 iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit 75461a0b15d7c026924d0001abce0476bbc7eda8 upstream.
This driver makes use of triggered buffers, but does not select the required modules.
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
--- drivers/iio/proximity/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
drivers/iio/proximity/Kconfig +2 -0
@@ -60,6 +60,8 @@ config LIDAR_LITE_V2 config MB1232 tristate "MaxSonar I2CXL family ultrasonic sensors" depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y to build a driver for the ultrasonic sensors I2CXL of MaxBotix which have an i2c interface. It can be used to measure
Greg Kroah-Hartman
maintainerPATCH 66/91 iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit 5bede948670f447154df401458aef4e2fd446ba8 upstream.
This driver makes use of triggered buffers, but does not select the required modules.
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
--- drivers/iio/dac/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
drivers/iio/dac/Kconfig +2 -0
@@ -9,6 +9,8 @@ menu "Digital to analog converters" config AD3552R tristate "Analog Devices AD3552R DAC driver" depends on SPI_MASTER + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD3552R Digital to Analog Converter.
Signature · 1 line
2.47.0
Greg Kroah-Hartman
maintainerPATCH 67/91 iio: adc: ti-ads124s08: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Carrasco <[email protected]>
commit eb143d05def52bc6d193e813018e5fa1a0e47c77 upstream.
This driver makes use of triggered buffers, but does not select the required modules.
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
--- drivers/iio/adc/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
drivers/iio/adc/Kconfig +2 -0
@@ -1205,6 +1205,8 @@ config TI_ADS8688 config TI_ADS124S08 tristate "Texas Instruments ADS124S08" depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADS124S08 and ADS124S06 ADC chips
Greg Kroah-Hartman
maintainerPATCH 68/91 Bluetooth: Call iso_exit() on module unload
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaron Thompson <[email protected]>
commit d458cd1221e9e56da3b2cc5518ad3225caa91f20 upstream.
If iso_init() has been called, iso_exit() must be called on module unload. Without that, the struct proto that iso_init() registered with proto_register() becomes invalid, which could cause unpredictable problems later. In my case, with CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually triggers this BUG():
list_add corruption. next->prev should be prev (ffffffffb5355fd0),
but was 0000000000000068. (next=ffffffffc0a010d0).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x61/0xa0
...
__list_add_valid_or_report+0x61/0xa0
proto_register+0x299/0x320
hci_sock_init+0x16/0xc0 [bluetooth]
bt_init+0x68/0xd0 [bluetooth]
__pfx_bt_init+0x10/0x10 [bluetooth]
do_one_initcall+0x80/0x2f0
do_init_module+0x8b/0x230
__do_sys_init_module+0x15f/0x190
do_syscall_64+0x68/0x110
...--- net/bluetooth/af_bluetooth.c | 2 ++ 1 file changed, 2 insertions(+)
net/bluetooth/af_bluetooth.c +2 -0
@@ -802,6 +802,8 @@ cleanup_led: static void __exit bt_exit(void) { +iso_exit (); +mgmt_exit ();sco_exit ();
Greg Kroah-Hartman
maintainerPATCH 69/91 Bluetooth: Remove debugfs directory on module init failure
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaron Thompson <[email protected]>
commit 1db4564f101b47188c1b71696bd342ef09172b22 upstream.
If bt_init() fails, the debugfs directory currently is not removed. If the module is loaded again after that, the debugfs directory is not set up properly due to the existing directory.
# modprobe bluetooth # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:26 ./ drwx------ 31 root root 0 Sep 27 14:25 ../ -r--r--r-- 1 root root 0 Sep 27 14:26 l2cap -r--r--r-- 1 root root 0 Sep 27 14:26 sco # modprobe -r bluetooth # ls -laF /sys/kernel/debug/bluetooth ls: cannot access '/sys/kernel/debug/bluetooth': No such file or directory #
# modprobe bluetooth modprobe: ERROR: could not insert 'bluetooth': Invalid argument # dmesg | tail -n 6 Bluetooth: Core ver 2.22 NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Faking l2cap_init() failure for testing NET: Unregistered PF_BLUETOOTH protocol family # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:31 ./ drwx------ 31 root root 0 Sep 27 14:26 ../ #
# modprobe bluetooth # dmesg | tail -n 7 Bluetooth: Core ver 2.22 debugfs: Directory 'bluetooth' with parent '/' already present! NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:31 ./ drwx------ 31 root root 0 Sep 27 14:26 ../ #
--- net/bluetooth/af_bluetooth.c | 1 + 1 file changed, 1 insertion(+)
net/bluetooth/af_bluetooth.c +1 -0
@@ -797,6 +797,7 @@ cleanup_sysfs:bt_sysfs_cleanup (); cleanup_led:bt_leds_cleanup (); +debugfs_remove_recursive (bt_debugfs);return err; }
Greg Kroah-Hartman
maintainerPATCH 70/91 Bluetooth: ISO: Fix multiple init when debugfs is disabled
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaron Thompson <[email protected]>
commit a9b7b535ba192c6b77e6c15a4c82d853163eab8c upstream.
If bt_debugfs is not created successfully, which happens if either CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init() returns early and does not set iso_inited to true. This means that a subsequent call to iso_init() will result in duplicate calls to proto_register(), bt_sock_register(), etc.
With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the duplicate call to proto_register() triggers this BUG():
list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250,
next=ffffffffc0b280d0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x9a/0xa0
...
__list_add_valid_or_report+0x9a/0xa0
proto_register+0x2b5/0x340
iso_init+0x23/0x150 [bluetooth]
set_iso_socket_func+0x68/0x1b0 [bluetooth]
kmem_cache_free+0x308/0x330
hci_sock_sendmsg+0x990/0x9e0 [bluetooth]
__sock_sendmsg+0x7b/0x80
sock_write_iter+0x9a/0x110
do_iter_readv_writev+0x11d/0x220
vfs_writev+0x180/0x3e0
do_writev+0xca/0x100
...This change removes the early return. The check for iso_debugfs being NULL was unnecessary, it is always NULL when iso_inited is false.
--- net/bluetooth/iso.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
net/bluetooth/iso.c +1 -5
@@ -1837,13 +1837,9 @@ int iso_init(void)hci_register_cb (&iso_cb); -if (IS_ERR_OR_NULL (bt_debugfs)) -return 0 ; - -if (!iso_debugfs) { +if (!IS_ERR_OR_NULL (bt_debugfs)) iso_debugfs =debugfs_create_file ("iso" ,0444 , bt_debugfs,NULL , &iso_debugfs_fops); - } iso_inited = true;
Greg Kroah-Hartman
maintainerPATCH 71/91 Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luiz Augusto von Dentz <[email protected]>
commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream.
Fake CSR controllers don't seem to handle short-transfer properly which cause command to time out:
kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout
According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size Constraints a interrupt transfer is considered complete when the size is 0 (ZPL) or < wMaxPacketSize:
'When an interrupt transfer involves more data than can fit in one data payload of the currently established maximum size, all data payloads are required to be maximum-sized except for the last data payload, which will contain the remaining data. An interrupt transfer is complete when the endpoint does one of the following:
• Has transferred exactly the amount of data expected
• Transfers a packet with a payload size less than wMaxPacketSize or transfers a zero-length packet'
--- drivers/bluetooth/btusb.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/bluetooth/btusb.c +9 -4
@@ -1191,10 +1191,15 @@ static int btusb_submit_intr_urb(structif (!urb)return -ENOMEM ; -/* Use maximum HCI Event size so the USB stack handles -* ZPL/short-transfer automatically. -*/ - size =HCI_MAX_EVENT_SIZE ; +if (le16_to_cpu (data->udev->descriptor.idVendor) ==0x0a12 && +le16_to_cpu (data->udev->descriptor.idProduct) ==0x0001 ) +/* Fake CSR devices don't seem to support sort-transter */ + size =le16_to_cpu (data->intr_ep->wMaxPacketSize); +else +/* Use maximum HCI Event size so the USB stack handles +* ZPL/short-transfer automatically. +*/ + size =HCI_MAX_EVENT_SIZE ; buf =kmalloc (size, mem_flags);if (!buf) {
Greg Kroah-Hartman
maintainerPATCH 72/91 xhci: Fix incorrect stream context type macro
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman <[email protected]>
commit 6599b6a6fa8060145046d0744456b6abdb3122a7 upstream.
The stream contex type (SCT) bitfield is used both in the stream context data structure, and in the 'Set TR Dequeue pointer' command TRB. In both cases it uses bits 3:1
The SCT_FOR_TRB(p) macro used to set the stream context type (SCT) field for the 'Set TR Dequeue pointer' command TRB incorrectly shifts the value 1 bit left before masking the three bits.
Fix this by first masking and rshifting, just like the similar SCT_FOR_CTX(p) macro does
This issue has not been visibile as the lost bit 3 is only used with secondary stream arrays (SSA). Xhci driver currently only supports using a primary stream array with Linear stream addressing.
--- drivers/usb/host/xhci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/host/xhci.h +1 -1
@@ -1286,7 +1286,7 @@ enum xhci_setup_dev {/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */ #define TRB_TO_STREAM_ID (p) ((((p) & (0xffff << 16)) >> 16))#define STREAM_ID_FOR_TRB (p) ((((p)) & 0xffff) << 16) -#define SCT_FOR_TRB (p) (((p) << 1) & 0x7) +#define SCT_FOR_TRB (p) (((p) & 0x7) << 1)/* Link TRB specific fields */ #define TRB_TC (1<<1)
Greg Kroah-Hartman
maintainerPATCH 73/91 xhci: Mitigate failed set dequeue pointer commands
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman <[email protected]>
commit fe49df60cdb7c2975aa743dc295f8786e4b7db10 upstream.
Avoid xHC host from processing a cancelled URB by always turning cancelled URB TDs into no-op TRBs before queuing a 'Set TR Deq' command.
If the command fails then xHC will start processing the cancelled TD instead of skipping it once endpoint is restarted, causing issues like Babble error.
This is not a complete solution as a failed 'Set TR Deq' command does not guarantee xHC TRB caches are cleared.
--- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/host/xhci-ring.c +1 -1
@@ -1006,7 +1006,7 @@ static int xhci_invalidate_cancelled_tdstd_to_noop (xhci, ring, cached_td, false); cached_td->cancel_status =TD_CLEARED ; } - +td_to_noop (xhci, ring, td, false); td->cancel_status =TD_CLEARING_CACHE ; cached_td = td;break ;
Greg Kroah-Hartman
maintainerPATCH 74/91 USB: serial: option: add support for Quectel EG916Q-GL
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin B. Frost <[email protected]>
commit 540eff5d7faf0c9330ec762da49df453263f7676 upstream.
Add Quectel EM916Q-GL with product ID 0x6007
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6007 Rev= 2.00 S: Manufacturer=Quectel S: Product=EG916Q-GL C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=200mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=88(I) Atr=03(Int.) MxPS= 32 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
MI_00 Quectel USB Diag PortMI_01 Quectel USB NMEA PortMI_02 Quectel USB AT PortMI_03 Quectel USB Modem PortMI_04 Quectel USB Net Port
--- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -279,6 +279,7 @@ static void option_instat_callback(struc#define QUECTEL_PRODUCT_EG912Y 0x6001#define QUECTEL_PRODUCT_EC200S_CN 0x6002#define QUECTEL_PRODUCT_EC200A 0x6005 +#define QUECTEL_PRODUCT_EG916Q 0x6007#define QUECTEL_PRODUCT_EM061K_LWW 0x6008#define QUECTEL_PRODUCT_EM061K_LCN 0x6009#define QUECTEL_PRODUCT_EC200T 0x6026
@@ -1270,6 +1271,7 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG916Q, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
Greg Kroah-Hartman
maintainerPATCH 75/91 USB: serial: option: add Telit FN920C04 MBIM compositions
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniele Palmas <[email protected]>
commit 6d951576ee16430822a8dee1e5c54d160e1de87d upstream.
Add the following Telit FN920C04 compositions:
0x10a2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10a7: MBIM + tty (AT) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a7 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10aa: MBIM + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10aa Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
--- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/usb/serial/option.c +6 -0
@@ -1382,10 +1382,16 @@ static const struct usb_device_id option .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff), /* Telit FN20C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a2, 0xff), /* Telit FN920C04 (MBIM) */ + .driver_info = NCTRL(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a4, 0xff), /* Telit FN20C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a7, 0xff), /* Telit FN920C04 (MBIM) */ + .driver_info = NCTRL(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a9, 0xff), /* Telit FN20C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff), /* Telit FN920C04 (MBIM) */ + .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
Greg Kroah-Hartman
maintainerPATCH 76/91 usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Prashanth K <[email protected]>
commit c96e31252110a84dcc44412e8a7b456b33c3e298 upstream.
DWC3 programming guide mentions that when operating in USB2.0 speeds, if GUSB2PHYCFG[6] or GUSB2PHYCFG[8] is set, it must be cleared prior to issuing commands and may be set again after the command completes. But currently while issuing EndXfer command without CmdIOC set, we wait for 1ms after GUSB2PHYCFG is restored. This results in cases where EndXfer command doesn't get completed and causes SMMU faults since requests are unmapped afterwards. Hence restore GUSB2PHYCFG after waiting for EndXfer command completion.
--- drivers/usb/dwc3/gadget.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/usb/dwc3/gadget.c +6 -4
@@ -445,6 +445,10 @@ skip_status:dwc3_gadget_ep_get_transfer_index (dep); } +if (DWC3_DEPCMD_CMD (cmd) ==DWC3_DEPCMD_ENDTRANSFER && + !(cmd &DWC3_DEPCMD_CMDIOC )) +mdelay (1 ); +if (saved_config) { reg =dwc3_readl (dwc->regs,DWC3_GUSB2PHYCFG (0 )); reg |= saved_config;
@@ -1731,12 +1735,10 @@ static int __dwc3_stop_active_transfer(sWARN_ON_ONCE (ret); dep->resource_index =0 ; -if (!interrupt) { -mdelay (1 ); +if (!interrupt) dep->flags &= ~DWC3_EP_TRANSFER_STARTED ; - }else if (!ret) { +else if (!ret) dep->flags |=DWC3_EP_END_TRANSFER_PENDING ; - } dep->flags &= ~DWC3_EP_DELAY_STOP ;return ret;
Greg Kroah-Hartman
maintainerPATCH 77/91 parport: Proper fix for array out-of-bounds access
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 02ac3a9ef3a18b58d8f3ea2b6e46de657bf6c4f9 upstream.
The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit.
Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly.
--- drivers/parport/procfs.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/parport/procfs.c +11 -11
@@ -51,12 +51,12 @@ static int do_active_device(struct ctl_tfor (dev = port->devices; dev ; dev = dev->next) {if (dev == port->cad) { - len +=snprintf (buffer,sizeof (buffer),"%s\n" , dev->name); + len +=scnprintf (buffer,sizeof (buffer),"%s\n" , dev->name); } }if (!len) { - len +=snprintf (buffer,sizeof (buffer),"%s\n" ,"none" ); + len +=scnprintf (buffer,sizeof (buffer),"%s\n" ,"none" ); }if (len > *lenp)
@@ -87,19 +87,19 @@ static int do_autoprobe(struct ctl_table }if ((str = info->class_name) !=NULL ) - len +=snprintf (buffer + len,sizeof (buffer) - len,"CLASS:%s;\n" , str); + len +=scnprintf (buffer + len,sizeof (buffer) - len,"CLASS:%s;\n" , str);if ((str = info->model) !=NULL ) - len +=snprintf (buffer + len,sizeof (buffer) - len,"MODEL:%s;\n" , str); + len +=scnprintf (buffer + len,sizeof (buffer) - len,"MODEL:%s;\n" , str);if ((str = info->mfr) !=NULL ) - len +=snprintf (buffer + len,sizeof (buffer) - len,"MANUFACTURER:%s;\n" , str); + len +=scnprintf (buffer + len,sizeof (buffer) - len,"MANUFACTURER:%s;\n" , str);if ((str = info->description) !=NULL ) - len +=snprintf (buffer + len,sizeof (buffer) - len,"DESCRIPTION:%s;\n" , str); + len +=scnprintf (buffer + len,sizeof (buffer) - len,"DESCRIPTION:%s;\n" , str);if ((str = info->cmdset) !=NULL ) - len +=snprintf (buffer + len,sizeof (buffer) - len,"COMMAND SET:%s;\n" , str); + len +=scnprintf (buffer + len,sizeof (buffer) - len,"COMMAND SET:%s;\n" , str);if (len > *lenp) len = *lenp;
@@ -128,7 +128,7 @@ static int do_hardware_base_addr(structif (write)/* permissions prevent this anyway */ return -EACCES ; - len +=snprintf (buffer,sizeof (buffer),"%lu\t%lu\n" , port->base, port->base_hi); + len +=scnprintf (buffer,sizeof (buffer),"%lu\t%lu\n" , port->base, port->base_hi);if (len > *lenp) len = *lenp;
@@ -155,7 +155,7 @@ static int do_hardware_irq(struct ctl_taif (write)/* permissions prevent this anyway */ return -EACCES ; - len +=snprintf (buffer,sizeof (buffer),"%d\n" , port->irq); + len +=scnprintf (buffer,sizeof (buffer),"%d\n" , port->irq);if (len > *lenp) len = *lenp;
@@ -182,7 +182,7 @@ static int do_hardware_dma(struct ctl_taif (write)/* permissions prevent this anyway */ return -EACCES ; - len +=snprintf (buffer,sizeof (buffer),"%d\n" , port->dma); + len +=scnprintf (buffer,sizeof (buffer),"%d\n" , port->dma);if (len > *lenp) len = *lenp;
@@ -213,7 +213,7 @@ static int do_hardware_modes(struct ctl_#define printmode (x) \ do { \ if (port->modes & PARPORT_MODE_##x) \ - len += snprintf(buffer + len, sizeof(buffer) - len, "%s%s", f++ ? "," : "", #x); \ + len += scnprintf(buffer + len, sizeof(buffer) - len, "%s%s", f++ ? "," : "", #x); \ } while (0)int f =0 ;printmode (PCSPP );
Greg Kroah-Hartman
maintainerPATCH 78/91 x86/resctrl: Annotate get_mem_config() functions as __init
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nathan Chancellor <[email protected]>
commit d5fd042bf4cfb557981d65628e1779a492cd8cfa upstream.
After a recent LLVM change [1] that deduces __cold on functions that only call cold code (such as __init functions), there is a section mismatch warning from __get_mem_config_intel(), which got moved to .text.unlikely. as a result of that optimization:
WARNING: modpost: vmlinux: section mismatch in reference: \ __get_mem_config_intel+0x77 (section: .text.unlikely.) -> thread_throttle_mode_init (section: .init.text)
Mark __get_mem_config_intel() as __init as well since it is only called from __init code, which clears up the warning.
While __rdt_get_mem_config_amd() does not exhibit a warning because it does not call any __init code, it is a similar function that is only called from __init code like __get_mem_config_intel(), so mark it __init as well to keep the code symmetrical.
CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error.
--- arch/x86/kernel/cpu/resctrl/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/cpu/resctrl/core.c +2 -2
@@ -174,7 +174,7 @@ static inline bool rdt_get_mb_table(strureturn false; } -static bool __get_mem_config_intel (struct rdt_resource *r) +static __init bool __get_mem_config_intel (struct rdt_resource *r) {struct rdt_hw_resource *hw_res =resctrl_to_arch_res (r);union cpuid_0x10_3_eax eax;
@@ -208,7 +208,7 @@ static bool __get_mem_config_intel(strucreturn true; } -static bool __rdt_get_mem_config_amd (struct rdt_resource *r) +static __init bool __rdt_get_mem_config_amd (struct rdt_resource *r) {struct rdt_hw_resource *hw_res =resctrl_to_arch_res (r);union cpuid_0x10_3_eax eax;
Greg Kroah-Hartman
maintainerPATCH 79/91 x86/apic: Always explicitly disarm TSC-deadline timer
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Rui <[email protected]>
commit ffd95846c6ec6cf1f93da411ea10d504036cab42 upstream.
New processors have become pickier about the local APIC timer state before entering low power modes. These low power modes are used (for example) when you close your laptop lid and suspend. If you put your laptop in a bag and it is not in this low power mode, it is likely to get quite toasty while it quickly sucks the battery dry.
The problem boils down to some CPUs' inability to power down until the CPU recognizes that the local APIC timer is shut down. The current kernel code works in one-shot and periodic modes but does not work for deadline mode. Deadline mode has been the supported and preferred mode on Intel CPUs for over a decade and uses an MSR to drive the timer instead of an APIC register.
Disable the TSC Deadline timer in lapic_timer_shutdown() by writing to MSR_IA32_TSC_DEADLINE when in TSC-deadline mode. Also avoid writing to the initial-count register (APIC_TMICT) which is ignored in TSC-deadline mode.
Note: The APIC_LVTT|=APIC_LVT_MASKED operation should theoretically be enough to tell the hardware that the timer will not fire in any of the timer modes. But mitigating AMD erratum 411[1] also requires clearing out APIC_TMICT. Solely setting APIC_LVT_MASKED is also ineffective in practice on Intel Lunar Lake systems, which is the motivation for this change.
1. 411 Processor May Exit Message-Triggered C1E State Without an Interrupt if Local APIC Timer Reaches Zero - https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/revision-guides/41322_10h_Rev_Gd.pdf
--- arch/x86/kernel/apic/apic.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
arch/x86/kernel/apic/apic.c +13 -1
@@ -503,7 +503,19 @@ static int lapic_timer_shutdown(struct c v =apic_read (APIC_LVTT ); v |= (APIC_LVT_MASKED |LOCAL_TIMER_VECTOR );apic_write (APIC_LVTT , v); -apic_write (APIC_TMICT ,0 ); + +/* +* Setting APIC_LVT_MASKED (above) should be enough to tell +* the hardware that this timer will never fire. But AMD +* erratum 411 and some Intel CPU behavior circa 2024 say +* otherwise. Time for belt and suspenders programming: mask +* the timer _and_ zero the counter registers: +*/ +if (v &APIC_LVT_TIMER_TSCDEADLINE ) +wrmsrl (MSR_IA32_TSC_DEADLINE ,0 ); +else +apic_write (APIC_TMICT ,0 ); +return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 80/91 x86/entry_32: Do not clobber user EFLAGS.ZF
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pawan Gupta <[email protected]>
commit 2e2e5143d4868163d6756c8c6a4d28cbfa5245e5 upstream.
Opportunistic SYSEXIT executes VERW to clear CPU buffers after user EFLAGS are restored. This can clobber user EFLAGS.ZF.
Move CLEAR_CPU_BUFFERS before the user EFLAGS are restored. This ensures that the user EFLAGS.ZF is not clobbered.
--- arch/x86/entry/entry_32.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/entry/entry_32.S +2 -1
@@ -902,6 +902,8 @@ SYM_FUNC_START(entry_SYSENTER_32) /* Now ready to switch the cr3 */ SWITCH_TO_USER_CR3 scratch_reg=%eax + /* Clobbers ZF */ + CLEAR_CPU_BUFFERS /* * Restore all flags except IF. (We restore IF separately because
@@ -912,7 +914,6 @@ SYM_FUNC_START(entry_SYSENTER_32) BUG_IF_WRONG_CR3 no_user_check=1 popfl popl %eax - CLEAR_CPU_BUFFERS /* * Return back to the vDSO, which will pop ecx and edx.
Greg Kroah-Hartman
maintainerPATCH 81/91 x86/entry_32: Clear CPU buffers after register restore in NMI return
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pawan Gupta <[email protected]>
commit 48a2440d0f20c826b884e04377ccc1e4696c84e9 upstream.
CPU buffers are currently cleared after call to exc_nmi, but before register state is restored. This may be okay for MDS mitigation but not for RDFS. Because RDFS mitigation requires CPU buffers to be cleared when registers don't have any sensitive data.
Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI.
--- arch/x86/entry/entry_32.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/entry/entry_32.S +2 -1
@@ -1176,7 +1176,6 @@ SYM_CODE_START(asm_exc_nmi) /* Not on SYSENTER stack. */ call exc_nmi - CLEAR_CPU_BUFFERS jmp .Lnmi_return .Lnmi_from_sysenter_stack:
@@ -1197,6 +1196,7 @@ SYM_CODE_START(asm_exc_nmi) CHECK_AND_APPLY_ESPFIX RESTORE_ALL_NMI cr3_reg=%edi pop=4 + CLEAR_CPU_BUFFERS jmp .Lirq_return #ifdef CONFIG_X86_ESPFIX32
@@ -1238,6 +1238,7 @@ SYM_CODE_START(asm_exc_nmi) * 1 - orig_ax */ lss (1+5+6)*4(%esp), %esp # back to espfix stack + CLEAR_CPU_BUFFERS jmp .Lirq_return #endif SYM_CODE_END(asm_exc_nmi)
Greg Kroah-Hartman
maintainerPATCH 82/91 tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Longlong Xia <[email protected]>
commit 9462f4ca56e7d2430fdb6dcc8498244acbfc4489 upstream.
BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] Read of size 8 at addr ffff88815fe99c00 by task poc/3379 CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: <TASK> gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] __pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm] __pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389 update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500 __pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846 __rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161 gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] _raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107 __pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm] ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195 ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79 __pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338 __pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805 tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818 Allocated by task 65: gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm] gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm] gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm] gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm] tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391 tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39 flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445 process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229 worker_thread+0x3dc/0x950 kernel/workqueue.c:3391 kthread+0x2a3/0x370 kernel/kthread.c:389 ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257 Freed by task 3367: kfree+0x126/0x420 mm/slub.c:4580 gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818
[Analysis]gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux can be freed by multi threads through ioctl,which leads to the occurrence of uaf. Protect it by gsm tx lock.
--- drivers/tty/n_gsm.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/tty/n_gsm.c +2 -0
@@ -2568,6 +2568,8 @@ static void gsm_cleanup_mux(struct gsm_mmutex_unlock (&gsm->mutex);/* Now wipe the queues */ tty_ldisc_flush (gsm->tty); + +guard (spinlock_irqsave)(&gsm->tx_lock);list_for_each_entry_safe (txq, ntxq, &gsm->tx_ctrl_list, list)kfree (txq);INIT_LIST_HEAD (&gsm->tx_ctrl_list);
Greg Kroah-Hartman
maintainerPATCH 83/91 pinctrl: ocelot: fix system hang on level based interrupts
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergey Matsievskiy <[email protected]>
commit 93b8ddc54507a227087c60a0013ed833b6ae7d3c upstream.
The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts.
```
for (i = 0; i < info->stride; i++) {
uregmap_read(info->map, id_reg + 4 * i, ®);
if (!reg)
continue;
chained_irq_enter(parent_chip, desc);
```However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt.
Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware.
The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers:
``` grep -r -A 10 chained_irq_enter drivers/pinctrl ```
--- drivers/pinctrl/pinctrl-ocelot.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/pinctrl/pinctrl-ocelot.c +4 -4
@@ -1962,21 +1962,21 @@ static void ocelot_irq_handler(struct irunsigned int reg =0 , irq, i;unsigned long irqs; +chained_irq_enter (parent_chip, desc); +for (i =0 ; i < info->stride; i++) {regmap_read (info->map, id_reg +4 * i, ®);if (!reg)continue ; -chained_irq_enter (parent_chip, desc); - irqs = reg;for_each_set_bit (irq, &irqs,min (32U , info->desc->npins -32 * i))generic_handle_domain_irq (chip->irq.domain, irq +32 * i); - -chained_irq_exit (parent_chip, desc); } + +chained_irq_exit (parent_chip, desc); } static int ocelot_gpiochip_register(struct platform_device *pdev,
Greg Kroah-Hartman
maintainerPATCH 84/91 pinctrl: apple: check devm_kasprintf() returned value
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ma Ke <[email protected]>
commit 665a58fe663ac7a9ea618dc0b29881649324b116 upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value.
Found by code review.
--- drivers/pinctrl/pinctrl-apple-gpio.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/pinctrl/pinctrl-apple-gpio.c +3 -0
@@ -471,6 +471,9 @@ static int apple_gpio_pinctrl_probe(strufor (i =0 ; i < npins; i++) { pins[i].number = i; pins[i].name =devm_kasprintf (&pdev->dev,GFP_KERNEL ,"PIN%u" , i); +if (!pins[i].name) +return -ENOMEM ; + pins[i].drv_data = pctl; pin_names[i] = pins[i].name; pin_nums[i] = i;
Greg Kroah-Hartman
maintainerPATCH 85/91 irqchip/gic-v4: Dont allow a VMOVP on a dying VPE
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <[email protected]>
commit 1442ee0011983f0c5c4b92380e6853afb513841a upstream.
Kunkun Jiang reported that there is a small window of opportunity for userspace to force a change of affinity for a VPE while the VPE has already been unmapped, but the corresponding doorbell interrupt still visible in /proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0 ancestor.
--- drivers/irqchip/irq-gic-v3-its.c | 18 ++++++++++++------ include/linux/irqchip/arm-gic-v4.h | 4 +++- 2 files changed, 15 insertions(+), 7 deletions(-)
drivers/irqchip/irq-gic-v3-its.c +12 -6
@@ -793,8 +793,8 @@ static struct its_vpe *its_build_vmapp_cits_encode_valid (cmd, desc->its_vmapp_cmd.valid);if (!desc->its_vmapp_cmd.valid) { + alloc = !atomic_dec_return (&desc->its_vmapp_cmd.vpe->vmapp_count);if (is_v4_1 (its)) { - alloc = !atomic_dec_return (&desc->its_vmapp_cmd.vpe->vmapp_count);its_encode_alloc (cmd, alloc);/* * Unmapping a VPE is self-synchronizing on GICv4.1,
@@ -813,13 +813,13 @@ static struct its_vpe *its_build_vmapp_cits_encode_vpt_addr (cmd, vpt_addr);its_encode_vpt_size (cmd,LPI_NRBITS -1 ); + alloc = !atomic_fetch_inc (&desc->its_vmapp_cmd.vpe->vmapp_count); +if (!is_v4_1 (its)) goto out; vconf_addr =virt_to_phys (page_address (desc->its_vmapp_cmd.vpe->its_vm->vprop_page)); - alloc = !atomic_fetch_inc (&desc->its_vmapp_cmd.vpe->vmapp_count); -its_encode_alloc (cmd, alloc);/*
@@ -3796,6 +3796,13 @@ static int its_vpe_set_affinity(struct iint from, cpu;/* +* Check if we're racing against a VPE being destroyed, for +* which we don't want to allow a VMOVP. +*/ +if (!atomic_read (&vpe->vmapp_count)) +return -EINVAL ; + +/* * Changing affinity is mega expensive, so let's be as lazy as * we can and only do it if we really have to. Also, if mapped * into the proxy device, we need to move the doorbell
@@ -4431,9 +4438,8 @@ static int its_vpe_init(struct its_vpe *raw_spin_lock_init (&vpe->vpe_lock); vpe->vpe_id = vpe_id; vpe->vpt_page = vpt_page; -if (gic_rdists->has_rvpeid) -atomic_set (&vpe->vmapp_count,0 ); -else +atomic_set (&vpe->vmapp_count,0 ); +if (!gic_rdists->has_rvpeid) vpe->vpe_proxy_event =-1 ;return 0 ;
include/linux/irqchip/arm-gic-v4.h +3 -1
@@ -58,10 +58,12 @@ struct its_vpe {bool enabled;bool group; } sgi_config[16 ]; -atomic_t vmapp_count; }; }; +/* Track the VPE being mapped */ +atomic_t vmapp_count; +/* * Ensures mutual exclusion between affinity setting of the * vPE and vLPI operations using vpe->col_idx.
Greg Kroah-Hartman
maintainerPATCH 86/91 irqchip/sifive-plic: Unmask interrupt in plic_irq_enable()
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nam Cao <[email protected]>
commit 6b1e0651e9ce8ce418ad4ff360e7b9925dc5da79 upstream.
It is possible that an interrupt is disabled and masked at the same time. When the interrupt is enabled again by enable_irq(), only plic_irq_enable() is called, not plic_irq_unmask(). The interrupt remains masked and never raises.
An example where interrupt is both disabled and masked is when handle_fasteoi_irq() is the handler, and IRQS_ONESHOT is set. The interrupt handler:
1. Mask the interrupt
2. Handle the interrupt
3. Check if interrupt is still enabled, and unmask it (see
cond_unmask_eoi_irq())
If another task disables the interrupt in the middle of the above steps, the interrupt will not get unmasked, and will remain masked when it is enabled in the future.
The problem is occasionally observed when PREEMPT_RT is enabled, because PREEMPT_RT adds the IRQS_ONESHOT flag. But PREEMPT_RT only makes the problem more likely to appear, the bug has been around since commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations").
Fix it by unmasking interrupt in plic_irq_enable().
--- drivers/irqchip/irq-sifive-plic.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)
drivers/irqchip/irq-sifive-plic.c +11 -10
@@ -116,16 +116,6 @@ static inline void plic_irq_toggle(const } } -static void plic_irq_enable (struct irq_data *d) -{ -plic_irq_toggle (irq_data_get_effective_affinity_mask (d), d,1 ); -} - -static void plic_irq_disable (struct irq_data *d) -{ -plic_irq_toggle (irq_data_get_effective_affinity_mask (d), d,0 ); -} -static void plic_irq_unmask (struct irq_data *d) {struct plic_priv *priv =irq_data_get_irq_chip_data (d);
@@ -140,6 +130,17 @@ static void plic_irq_mask(struct irq_datwritel (0 , priv->regs +PRIORITY_BASE + d->hwirq *PRIORITY_PER_ID ); } +static void plic_irq_enable (struct irq_data *d) +{ +plic_irq_toggle (irq_data_get_effective_affinity_mask (d), d,1 ); +plic_irq_unmask (d); +} + +static void plic_irq_disable (struct irq_data *d) +{ +plic_irq_toggle (irq_data_get_effective_affinity_mask (d), d,0 ); +} +static void plic_irq_eoi (struct irq_data *d) {struct plic_handler *handler =this_cpu_ptr (&plic_handlers);
Greg Kroah-Hartman
maintainerPATCH 87/91 tcp: fix mptcp DSS corruption due to large pmtu xmit
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni <[email protected]>
commit 4dabcdf581217e60690467a37c956a5b8dbc6bd9 upstream.
Syzkaller was able to trigger a DSS corruption:
TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies.
------------[ cut here ]------------ WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Modules linked in: CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff RSP: 0018:ffffc90000006db8 EFLAGS: 00010246 RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00 RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0 RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8 R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000 R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5 FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> move_skbs_to_msk net/mptcp/protocol.c:811 [inline] mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854 subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490 tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283 tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5662 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6107 __napi_poll+0xcb/0x490 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6962 handle_softirqs+0x2c5/0x980 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451 dev_queue_xmit include/linux/netdevice.h:3094 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline] tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752 __tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015 tcp_push_pending_frames include/net/tcp.h:2107 [inline] tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline] tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 sk_backlog_rcv include/net/sock.h:1113 [inline] __release_sock+0x214/0x350 net/core/sock.c:3072 release_sock+0x61/0x1f0 net/core/sock.c:3626 mptcp_push_release net/mptcp/protocol.c:1486 [inline] __mptcp_push_pending+0x6b5/0x9f0 net/mptcp/protocol.c:1625 mptcp_sendmsg+0x10bb/0x1b10 net/mptcp/protocol.c:1903 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2603 ___sys_sendmsg net/socket.c:2657 [inline] __sys_sendmsg+0x2aa/0x390 net/socket.c:2686 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb06e9317f9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe2cfd4f98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fb06e97f468 RCX: 00007fb06e9317f9 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000005 RBP: 00007fb06e97f446 R08: 0000555500000000 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fb06e97f406 R13: 0000000000000001 R14: 00007ffe2cfd4fe0 R15: 0000000000000003 </TASK>
Additionally syzkaller provided a nice reproducer. The repro enables pmtu on the loopback device, leading to tcp_mtu_probe() generating very large probe packets.
tcp_can_coalesce_send_queue_head() currently does not check for mptcp-level invariants, and allowed the creation of cross-DSS probes, leading to the mentioned corruption.
Address the issue teaching tcp_can_coalesce_send_queue_head() about mptcp using the tcp_skb_can_collapse(), also reducing the code duplication.
[ Conflict in tcp_output.c, because the commit 65249feb6b3d ("net: add
support for skbs with unreadable frags") is not in this version. This commit is linked to a new feature (Devmem TCP) and introduces a new condition which causes the conflicts. Resolving this is easy: we can ignore the missing new condition, and use tcp_skb_can_collapse() like in the original patch. ]
--- net/ipv4/tcp_output.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
net/ipv4/tcp_output.c +1 -3
@@ -2312,9 +2312,7 @@ static bool tcp_can_coalesce_send_queue_if (len <= skb->len)break ; -if (unlikely (TCP_SKB_CB (skb)->eor) || -tcp_has_tx_tstamp (skb) || - !skb_pure_zcopy_same (skb, next)) +if (tcp_has_tx_tstamp (skb) || !tcp_skb_can_collapse (skb, next))return false; len -= skb->len;
Greg Kroah-Hartman
maintainerPATCH 88/91 mptcp: prevent MPC handshake on port-based signal endpoints
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni <[email protected]>
commit 3d041393ea8c815f773020fb4a995331a69c0139 upstream.
Syzkaller reported a lockdep splat:
============================================
WARNING: possible recursive locking detected 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Not tainted
--------------------------------------------
syz-executor364/5113 is trying to acquire lock:
ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
but task is already holding lock:
ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(k-slock-AF_INET);
lock(k-slock-AF_INET);*** DEADLOCK ***
May be due to missing lock nesting notation
7 locks held by syz-executor364/5113:
#0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806 #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727 #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470 #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228 #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline] #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104 #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232 #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
stack backtrace: CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_deadlock kernel/locking/lockdep.c:3061 [inline] validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855 __lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279 subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874 tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853 tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235 ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline] tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x214/0x350 net/core/sock.c:3004 release_sock+0x61/0x1f0 net/core/sock.c:3558 mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f04fb13a6b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9 RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240 R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300 </TASK>
As noted by Cong Wang, the splat is false positive, but the code path leading to the report is an unexpected one: a client is attempting an MPC handshake towards the in-kernel listener created by the in-kernel PM for a port based signal endpoint.
Such connection will be never accepted; many of them can make the listener queue full and preventing the creation of MPJ subflow via such listener - its intended role.
Explicitly detect this scenario at initial-syn time and drop the incoming MPC request.
[ Conflicts in mib.[ch], because commit 6982826fe5e5 ("mptcp: fallback
to TCP after SYN+MPC drops"), and commit 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole") are linked to new features, not available in this version. Resolving the conflicts is easy, simply adding the new lines declaring the new "endpoint attempt" MIB entry. Also a conflict in protocol.h, because commit fce68b03086f ("mptcp:
add scheduled in mptcp_subflow_context") is not in this version, and changes the context by introducing 'scheduled' variable just before. Also a conflict in pm_netlink.c, because commit 3aa362494170 ("mptcp:
avoid ssock usage in mptcp_pm_nl_create_listen_socket()") is not in this version, and refactor the function: that's fine, we can still set pm_listener before doing the 'listen()', taking 'ssock->sk' as 'ssk' is not defined before this refactoring. ]
--- net/mptcp/mib.c | 1 + net/mptcp/mib.h | 1 + net/mptcp/pm_netlink.c | 1 + net/mptcp/protocol.h | 1 + net/mptcp/subflow.c | 11 +++++++++++ 5 files changed, 15 insertions(+)
net/mptcp/mib.c +1 -0
@@ -15,6 +15,7 @@ static const struct snmp_mib mptcp_snmp_SNMP_MIB_ITEM ("MPCapableACKRX" ,MPTCP_MIB_MPCAPABLEPASSIVEACK ),SNMP_MIB_ITEM ("MPCapableFallbackACK" ,MPTCP_MIB_MPCAPABLEPASSIVEFALLBACK ),SNMP_MIB_ITEM ("MPCapableFallbackSYNACK" ,MPTCP_MIB_MPCAPABLEACTIVEFALLBACK ), +SNMP_MIB_ITEM ("MPCapableEndpAttempt" ,MPTCP_MIB_MPCAPABLEENDPATTEMPT ),SNMP_MIB_ITEM ("MPFallbackTokenInit" ,MPTCP_MIB_TOKENFALLBACKINIT ),SNMP_MIB_ITEM ("MPTCPRetrans" ,MPTCP_MIB_RETRANSSEGS ), SNMP_MIB_ITEM("MPJoinNoTokenFound", MPTCP_MIB_JOINNOTOKEN),
net/mptcp/mib.h +1 -0
@@ -8,6 +8,7 @@ enum linux_mptcp_mib_field {MPTCP_MIB_MPCAPABLEPASSIVEACK ,/* Received third ACK with MP_CAPABLE */ MPTCP_MIB_MPCAPABLEPASSIVEFALLBACK ,/* Server-side fallback during 3-way handshake */ MPTCP_MIB_MPCAPABLEACTIVEFALLBACK ,/* Client-side fallback during 3-way handshake */ +MPTCP_MIB_MPCAPABLEENDPATTEMPT ,/* Prohibited MPC to port-based endp */ MPTCP_MIB_TOKENFALLBACKINIT ,/* Could not init/allocate token */ MPTCP_MIB_RETRANSSEGS ,/* Segments retransmitted at the MPTCP-level */ MPTCP_MIB_JOINNOTOKEN, /* Received MP_JOIN but the token was not found */
net/mptcp/pm_netlink.c +1 -0
@@ -1111,6 +1111,7 @@ static int mptcp_pm_nl_create_listen_soc }inet_sk_state_store (newsk,TCP_LISTEN ); +WRITE_ONCE (mptcp_subflow_ctx (ssock->sk)->pm_listener, true); err =kernel_listen (ssock, backlog);if (err) {pr_warn ("kernel_listen error, err=%d" , err);
net/mptcp/protocol.h +1 -0
@@ -483,6 +483,7 @@ struct mptcp_subflow_context { close_event_done :1 ,/* has done the post-closed part */ __unused : 9;enum mptcp_data_avail data_avail; +bool pm_listener;/* a listener managed by the kernel PM? */ u32 remote_nonce;u64 thmac;u32 local_nonce;
net/mptcp/subflow.c +11 -0
@@ -131,6 +131,13 @@ static void subflow_add_reset_reason(str } } +static int subflow_reset_req_endp (struct request_sock *req,struct sk_buff *skb) +{ +SUBFLOW_REQ_INC_STATS (req,MPTCP_MIB_MPCAPABLEENDPATTEMPT ); +subflow_add_reset_reason (skb,MPTCP_RST_EPROHIBIT ); +return -EPERM ; +} +/* Init mptcp request socket. * * Returns an error code if a JOIN has failed and a TCP reset
@@ -162,6 +169,8 @@ static int subflow_check_req(struct requif (opt_mp_capable) {SUBFLOW_REQ_INC_STATS (req,MPTCP_MIB_MPCAPABLEPASSIVE ); +if (unlikely (listener->pm_listener)) +return subflow_reset_req_endp (req, skb);if (opt_mp_join)return 0 ; }else if (opt_mp_join) {
@@ -169,6 +178,8 @@ static int subflow_check_req(struct requif (mp_opt.backup)SUBFLOW_REQ_INC_STATS (req,MPTCP_MIB_JOINSYNBACKUPRX ); + }else if (unlikely (listener->pm_listener)) { +return subflow_reset_req_endp (req, skb); }if (opt_mp_capable && listener->request_mptcp) {
Greg Kroah-Hartman
maintainerPATCH 89/91 nilfs2: propagate directory read errors from nilfs_find_entry()
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ryusuke Konishi <[email protected]>
commit 08cfa12adf888db98879dbd735bc741360a34168 upstream.
Syzbot reported that a task hang occurs in vcs_open() during a fuzzing test for nilfs2.
The root cause of this problem is that in nilfs_find_entry(), which searches for directory entries, ignores errors when loading a directory page/folio via nilfs_get_folio() fails.
If the filesystem images is corrupted, and the i_size of the directory inode is large, and the directory page/folio is successfully read but fails the sanity check, for example when it is zero-filled, nilfs_check_folio() may continue to spit out error messages in bursts.
Fix this issue by propagating the error to the callers when loading a page/folio fails in nilfs_find_entry().
The current interface of nilfs_find_entry() and its callers is outdated and cannot propagate error codes such as -EIO and -ENOMEM returned via nilfs_find_entry(), so fix it together.
--- fs/nilfs2/dir.c | 50 +++++++++++++++++++++++++++----------------------- fs/nilfs2/namei.c | 39 ++++++++++++++++++++++++++------------- fs/nilfs2/nilfs.h | 2 +- 3 files changed, 54 insertions(+), 37 deletions(-)
fs/nilfs2/dir.c +27 -23
@@ -331,6 +331,8 @@ static int nilfs_readdir(struct file *fi* returns the page in which the entry was found, and the entry itself * (as a parameter - res_dir). Page is returned mapped and unlocked. * Entry is guaranteed to be valid. +* +* On failure, returns an error pointer and the caller should ignore res_page. */ struct nilfs_dir_entry * nilfs_find_entry(struct inode *dir, const struct qstr *qstr,
@@ -358,22 +360,24 @@ nilfs_find_entry(struct inode *dir, cons do { char *kaddr = nilfs_get_page(dir, n, &page); - if (!IS_ERR(kaddr)) { - de = (struct nilfs_dir_entry *)kaddr; - kaddr += nilfs_last_byte(dir, n) - reclen; - while ((char *) de <= kaddr) { - if (de->rec_len == 0) { - nilfs_error(dir->i_sb, - "zero-length directory entry"); - nilfs_put_page(page); - goto out; - } - if (nilfs_match(namelen, name, de)) - goto found; - de = nilfs_next_entry(de); + if (IS_ERR(kaddr)) + return ERR_CAST(kaddr); + + de = (struct nilfs_dir_entry *)kaddr; + kaddr += nilfs_last_byte(dir, n) - reclen; + while ((char *)de <= kaddr) { + if (de->rec_len == 0) { + nilfs_error(dir->i_sb, + "zero-length directory entry"); + nilfs_put_page(page); + goto out; } - nilfs_put_page(page); + if (nilfs_match(namelen, name, de)) + goto found; + de = nilfs_next_entry(de); } + nilfs_put_page(page); + if (++n >= npages) n = 0; /* next page is past the blocks we've got */
@@ -386,7 +390,7 @@ nilfs_find_entry(struct inode *dir, cons } }while (n != start); out: -return NULL ; +return ERR_PTR (-ENOENT ); found: *res_page = page;
@@ -431,19 +435,19 @@ fail:return NULL ; } -ino_t nilfs_inode_by_name (struct inode *dir,const struct qstr *qstr) +int nilfs_inode_by_name (struct inode *dir,const struct qstr *qstr,ino_t *ino) { -ino_t res =0 ;struct nilfs_dir_entry *de;struct page *page; de =nilfs_find_entry (dir, qstr, &page); -if (de) { - res =le64_to_cpu (de->inode); -kunmap (page); -put_page (page); - } -return res; +if (IS_ERR (de)) +return PTR_ERR (de); + + *ino =le64_to_cpu (de->inode); +kunmap (page); +put_page (page); +return 0 ; }/* Releases the page */
fs/nilfs2/namei.c +26 -13
@@ -55,12 +55,20 @@ nilfs_lookup(struct inode *dir, struct d {struct inode *inode;ino_t ino; +int res;if (dentry->d_name.len >NILFS_NAME_LEN )return ERR_PTR (-ENAMETOOLONG ); - ino =nilfs_inode_by_name (dir, &dentry->d_name); - inode = ino ?nilfs_iget (dir->i_sb,NILFS_I (dir)->i_root, ino) :NULL ; + res =nilfs_inode_by_name (dir, &dentry->d_name, &ino); +if (res) { +if (res != -ENOENT ) +return ERR_PTR (res); + inode =NULL ; + }else { + inode =nilfs_iget (dir->i_sb,NILFS_I (dir)->i_root, ino); + } +return d_splice_alias (inode, dentry); }
@@ -263,10 +271,11 @@ static int nilfs_do_unlink(struct inodestruct page *page;int err; - err = -ENOENT ; de =nilfs_find_entry (dir, &dentry->d_name, &page); -if (!de) +if (IS_ERR (de)) { + err =PTR_ERR (de); goto out; + } inode =d_inode (dentry); err = -EIO ;
@@ -361,10 +370,11 @@ static int nilfs_rename(struct user_nameif (unlikely (err))return err; - err = -ENOENT ; old_de =nilfs_find_entry (old_dir, &old_dentry->d_name, &old_page); -if (!old_de) +if (IS_ERR (old_de)) { + err =PTR_ERR (old_de); goto out; + }if (S_ISDIR (old_inode->i_mode)) { err = -EIO ;
@@ -381,10 +391,12 @@ static int nilfs_rename(struct user_nameif (dir_de && !nilfs_empty_dir (new_inode)) goto out_dir; - err = -ENOENT ; - new_de =nilfs_find_entry (new_dir, &new_dentry->d_name, &new_page); -if (!new_de) + new_de =nilfs_find_entry (new_dir, &new_dentry->d_name, + &new_page); +if (IS_ERR (new_de)) { + err =PTR_ERR (new_de); goto out_dir; + }nilfs_set_link (new_dir, new_de, new_page, old_inode);nilfs_mark_inode_dirty (new_dir); new_inode->i_ctime =current_time (new_inode);
@@ -438,13 +450,14 @@ out:*/ static struct dentry *nilfs_get_parent (struct dentry *child) { -unsigned long ino; +ino_t ino; +int res;struct inode *inode;struct nilfs_root *root; - ino =nilfs_inode_by_name (d_inode (child), &dotdot_name); -if (!ino) -return ERR_PTR (-ENOENT ); + res =nilfs_inode_by_name (d_inode (child), &dotdot_name, &ino); +if (res) +return ERR_PTR (res); root =NILFS_I (d_inode (child))->i_root;
fs/nilfs2/nilfs.h +1 -1
@@ -233,7 +233,7 @@ static inline __u32 nilfs_mask_flags(umo/* dir.c */ extern int nilfs_add_link (struct dentry *,struct inode *); -extern ino_t nilfs_inode_by_name (struct inode *,const struct qstr *); +int nilfs_inode_by_name (struct inode *dir,const struct qstr *qstr,ino_t *ino);extern int nilfs_make_empty (struct inode *,struct inode *);extern struct nilfs_dir_entry *nilfs_find_entry (struct inode *,const struct qstr *,struct page **);
Greg Kroah-Hartman
maintainerPATCH 90/91 powerpc/64: Add big-endian ELFv2 flavour to crypto VMX asm generation
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin <[email protected]>
commit 505ea33089dcfc3ee3201b0fcb94751165805413 upstream.
This allows asm generation for big-endian ELFv2 builds.
--- drivers/crypto/vmx/Makefile | 12 +++++++++++- drivers/crypto/vmx/ppc-xlate.pl | 10 ++++++---- 2 files changed, 17 insertions(+), 5 deletions(-)
drivers/crypto/vmx/Makefile +11 -1
@@ -2,8 +2,18 @@ obj-$(CONFIG_CRYPTO_DEV_VMX_ENCRYPT) += vmx-crypto.o vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o aes_xts.o ghash.o +ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y) +override flavour := linux-ppc64le +else +ifdef CONFIG_PPC64_ELF_ABI_V2 +override flavour := linux-ppc64-elfv2 +else +override flavour := linux-ppc64 +endif +endif + quiet_cmd_perl = PERL $@ - cmd_perl = $(PERL) $< $(if $(CONFIG_CPU_LITTLE_ENDIAN), linux-ppc64le, linux-ppc64) > $@ + cmd_perl = $(PERL) $< $(flavour) > $@ targets += aesp8-ppc.S ghashp8-ppc.S
drivers/crypto/vmx/ppc-xlate.pl +6 -4
@@ -9,6 +9,8 @@ open STDOUT,">$output" || die "can't ope my %GLOBALS; my $dotinlocallabels=($flavour=~/linux/)?1:0; +my $elfv2abi=(($flavour =~ /linux-ppc64le/) or ($flavour =~ /linux-ppc64-elfv2/))?1:0; +my $dotfunctions=($elfv2abi=~1)?0:1; ################################################################ # directives which need special treatment on different platforms
@@ -40,7 +42,7 @@ my $globl = sub { }; my $text = sub { my $ret = ($flavour =~ /aix/) ? ".csect\t.text[PR],7" : ".text"; - $ret = ".abiversion 2\n".$ret if ($flavour =~ /linux.*64le/); + $ret = ".abiversion 2\n".$ret if ($elfv2abi); $ret; }; my $machine = sub {
@@ -56,8 +58,8 @@ my $size = sub { if ($flavour =~ /linux/) { shift; my $name = shift; $name =~ s|^[\.\_]||; - my $ret = ".size $name,.-".($flavour=~/64$/?".":"").$name; - $ret .= "\n.size .$name,.-.$name" if ($flavour=~/64$/); + my $ret = ".size $name,.-".($dotfunctions?".":"").$name; + $ret .= "\n.size .$name,.-.$name" if ($dotfunctions); $ret; } else
@@ -142,7 +144,7 @@ my $vmr = sub { # Some ABIs specify vrsave, special-purpose register #256, as reserved # for system use. -my $no_vrsave = ($flavour =~ /linux-ppc64le/); +my $no_vrsave = ($elfv2abi); my $mtspr = sub { my ($f,$idx,$ra) = @_; if ($idx == 256 && $no_vrsave) {
Greg Kroah-Hartman
maintainerPATCH 91/91 ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2
In reply to Greg Kroah-Hartman6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasiliy Kovalev <[email protected]>
commit 164cd0e077a18d6208523c82b102c98c77fdd51f upstream.
The cached version avoids redundant commands to the codec, improving stability and reducing unnecessary operations. This change ensures better power management and reliable restoration of pin configurations, especially after hibernation (S4) and other power transitions.
--- sound/pci/hda/patch_conexant.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/pci/hda/patch_conexant.c +1 -1
@@ -334,7 +334,7 @@ static void cxt_fixup_update_pinctl(stru* This is the value stored in the codec register after * the correct initialization of the previous windows boot. */ -snd_hda_set_pin_ctl (codec,0x1d ,AC_PINCTL_HP_EN ); +snd_hda_set_pin_ctl_cache (codec,0x1d ,AC_PINCTL_HP_EN ); } }
Hello,
Quoted 5 lines · On Mon, 21 Oct 2024 12:24:14 +0200 Greg Kroah-Hartman…
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 7 lines
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].
[1] https://github.com/damonitor/damon-tests/tree/next/corr
[2] 6a7f9259c323 ("Linux 6.1.114-rc1")
Thanks,
SJ
[...]
---
ok 1 selftests: damon: debugfs_attrs.sh
ok 2 selftests: damon: debugfs_schemes.sh
ok 3 selftests: damon: debugfs_target_ids.sh
ok 4 selftests: damon: debugfs_empty_targets.sh
ok 5 selftests: damon: debugfs_huge_count_read_write.sh
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh
ok 7 selftests: damon: sysfs.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh # SKIP
ok 12 selftests: damon-tests: build_m68k.sh # SKIP
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh
[33m
[92mPASS [39m
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
There is a new warning that got picked up on ARM 32-buit:
fs/udf/namei.c:878:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=]
I was not able to locate a fix upstream for this, but it does appear to come from ("udf: Convert udf_rename() to new directory iteration code").
Signature · 1 line
Florian
Greg Kroah-Hartman
maintainerQuoted 24 lines · Florian Fainelli
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
On
ARCH_BRCMSTBusing 32-bit and 64-bit ARM kernels, build tested onBMIPS_GENERIC:Tested-by Florian Fainelli <[email protected]>
Quoted 7 lines
There is a new warning that got picked up on ARM 32-buit:
fs/udf/namei.c:878:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=]I was not able to locate a fix upstream for this, but it does appear to come from ("udf: Convert
udf_rename()to new directory iteration code").
Ah, thanks for tracking this down. Odd that it's only showing up here as these changes are all upstream, perhaps the stack size got increased in a newer kernel to work around this issue?
thanks,
greg k-h
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
The arm allmodconfig build failed due to following warnings / errors with toolchain clang-19.
For all other 32-bit arch builds it is noticed as a warning.
* arm, build
- clang-19-allmodconfig
Build warning / error:
-----------fs/udf/namei.c:747:12: error: stack frame size (1560) exceeds limit (1280) in 'udf_rename' [-Werror,-Wframe-larger-than]
747 | static int udf_rename(struct user_namespace *mnt_userns,
struct inode *old_dir,
| ^
1 error generated.
Links,
---
- https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.113-92-g6a7f9259c323/testrun/25501845/suite/build/test/clang-19-allmodconfig/details/
- https://storage.tuxsuite.com/public/linaro/lkft/builds/2nkFE9BnBhh1xegvL7gVqMnXz2x/
metadata:
---git_describe: v6.1.113-92-g6a7f9259c323git_repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitgit_sha: 6a7f9259c323c90fd1384904b8d547666568a716
config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2nkFE9BnBhh1xegvL7gVqMnXz2x/configdownload_url: https://storage.tuxsuite.com/public/linaro/lkft/builds/2nkFE9BnBhh1xegvL7gVqMnXz2x/
toolchain: clang-19
arch: arm
config: allmodconfig
--
Linaro LKFT
https://lkft.linaro.org
Greg Kroah-Hartman
maintainerQuoted 30 lines · Naresh Kamboju
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
The arm allmodconfig build failed due to following warnings / errors with toolchain clang-19.
For all other 32-bit arch builds it is noticed as a warning.* arm, build
- clang-19-allmodconfig
Quoted 8 lines
Build warning / error:
-----------fs/udf/namei.c:747:12: error: stack frame size (1560) exceeds limit (1280) in 'udf_rename' [-Werror,-Wframe-larger-than]
747 | static int udf_rename(structuser_namespace*mnt_userns,
struct inode*old_dir,
| ^
1 error generated.
Odd that this isn't seen in newer kernels, any chance you can bisect?
thanks,
greg k-h
Quoted 40 lines · Greg Kroah-Hartman
Quoted 30 lines · Naresh Kamboju
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
The arm allmodconfig build failed due to following warnings / errors with toolchain clang-19.
For all other 32-bit arch builds it is noticed as a warning.* arm, build
- clang-19-allmodconfigQuoted 8 lines
Build warning / error:
-----------fs/udf/namei.c:747:12: error: stack frame size (1560) exceeds limit (1280) in 'udf_rename' [-Werror,-Wframe-larger-than]
747 | static int udf_rename(structuser_namespace*mnt_userns,
struct inode*old_dir,
| ^
1 error generated.
Quoted 1 line
Odd that this isn't seen in newer kernels, any chance you can bisect?
Glancing over the commits in stable-rc it seems the series is missing commit 0aba4860b0d021 ("udf: Allocate name buffer in directory iterator on heap").
Honza
Signature · 2 lines
Jan Kara <[email protected]> SUSE Labs, CR
Greg Kroah-Hartman
maintainerQuoted 41 lines · Jan Kara
Quoted 40 lines · Greg Kroah-Hartman
Quoted 38 lines · Naresh Kamboju
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
The arm allmodconfig build failed due to following warnings / errors with toolchain clang-19.
For all other 32-bit arch builds it is noticed as a warning.* arm, build
- clang-19-allmodconfigBuild warning / error:
-----------fs/udf/namei.c:747:12: error: stack frame size (1560) exceeds limit (1280) in 'udf_rename' [-Werror,-Wframe-larger-than]
747 | static int udf_rename(structuser_namespace*mnt_userns,
struct inode*old_dir,
| ^
1 error generated.
Quoted 5 lines
Quoted 1 line
Odd that this isn't seen in newer kernels, any chance you can bisect?
Glancing over the commits in stable-rc it seems the series is missing commit
0aba4860b0d021("udf: Allocate name buffer in directory iterator on heap").
Thanks, I'll go queue that up now.
greg k-h
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
Hi!
Quoted 4 lines
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-6.1.y
Best regards,
Pavel
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Quoted 4 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Hi Greg,
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
Quoted 7 lines
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
I tested 6.1.114-rc1 (6a7f9259c323c) on Kalray kvx arch (not upstream yet) and everything looks good!
It ran on real hw (k200, k200lp and k300 boards), on qemu and on our internal instruction set simulator (ISS).
Tests were run on several interfaces/drivers (usb, qsfp ethernet, eMMC, PCIe endpoint+RC, SPI, remoteproc, uart, iommu). LTP and uClibc-ng testsuites are also run without any regression.
Everything looks fine to us.
Signature · 1 line
Yann
Jon Hunter
maintainerQuoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
Failures detected for Tegra ...
Test results for stable-v6.1:
10 builds: 10 pass, 0 fail
27 boots: 26 pass, 1 fail
110 tests: 110 pass, 0 failLinux version: 6.1.114-rc1-g6a7f9259c323
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04Boot failures: tegra30-cardhu-a04
Jon
Jon Hunter
maintainerHi Greg,
Quoted 26 lines · Jon Hunter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
Failures detected for Tegra ...
Test results for stable-v6.1:
10 builds: 10 pass, 0 fail 27 boots: 26 pass, 1 fail 110 tests: 110 pass, 0 fail
Quoted 7 lines
Linux version: 6.1.114-rc1-g6a7f9259c323
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04Boot failures: tegra30-cardhu-a04
I am running a bisect to narrow this down. However, just wanted to report this. Appears to be the same issue on linux-6.6.y.
Jon
Signature · 1 line
nvpublic
Jon Hunter
maintainerHi Greg,
Quoted 35 lines · Jon Hunter
Hi Greg,
Quoted 32 lines · Jon Hunter
Quoted 14 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.Quoted 3 lines
thanks,
greg k-h
Failures detected for Tegra ...
Test results for stable-v6.1:
10 builds: 10 pass, 0 fail
27 boots: 26 pass, 1 fail
110 tests: 110 pass, 0 failLinux version: 6.1.114-rc1-g6a7f9259c323
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Quoted 4 lines
Quoted 1 line
Boot failures: tegra30-cardhu-a04
I am running a bisect to narrow this down. However, just wanted to report this. Appears to be the same issue on linux-6.6.y.
Ignore this, it appears to be bogus. Both v6.1 and v6.6 failed 3 times while other kernels didn't. However, we are currently down to 1 tegra30-cardhu-a04 board in the farm and that one appears to be having issues. I may need to drop that old entirely if we can't fix them.
Jon
Signature · 1 line
nvpublic
Quoted 26 lines · Jon Hunter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.1.114 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.114-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.1.y
and the diffstat can be found below.thanks,
greg k-h
Failures detected for Tegra ...
Test results for stable-v6.1:
10 builds: 10 pass, 0 fail 27 boots: 26 pass, 1 fail 110 tests: 110 pass, 0 fail
Quoted 7 lines
Linux version: 6.1.114-rc1-g6a7f9259c323
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04Boot failures: tegra30-cardhu-a04
This appears to be a board issue. With that ...
Thanks
Jon
Signature · 1 line
nvpublic