Skip to contentSkip to conversation

iio: kx022a: Fix raw read format

PATCH In review Matti Vaittinen 3 participants 4 messages Oct 30, 2024 – Oct 31, 2024

Subsystems (2)
lore
Share & tools
lore

Matti Vaittinen

author maintainer
#0 lore raw

PATCH 1/1 iio: kx022a: Fix raw read format

The KX022A provides the accelerometer data in two subsequent registers. The registers are laid out so that the value obtained via bulk-read of these registers can be interpreted as signed 16-bit little endian value. The read value is converted to cpu_endianes and stored into 32bit integer. The le16_to_cpu() casts value to unsigned 16-bit value, and when this is assigned to 32-bit integer the resulting value will always be positive.

This has not been a problem to users (at least not all users) of the sysfs interface, who know the data format based on the scan info and who have converted the read value back to 16-bit signed value.

This, however, will be a problem for those who use the in-kernel interfaces, especially the iio_read_channel_processed_scale().

The iio_read_channel_processed_scale() performs multiplications to the returned (always positive) raw value, which will cause strange results when the data from the sensor has been negative.

Fix the read_raw format by casting the result of the le_to_cpu() to signed 16-bit value before assigning it to the integer. This will make the negative readings to be correctly reported as negative.

This fix will be visible to users by changing values returned via sysfs to appear in correct (negative) format.

Fixes 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
---
 drivers/iio/accel/kionix-kx022a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/accel/kionix-kx022a.c +1 -1
index 53d59a04ae15..b6a828a6df93 100644
@@ -594,7 +594,7 @@ static int kx022a_get_axis(struct kx022a_data *data,
 	if (ret)
 		return ret;
 
-	*val = le16_to_cpu(data->buffer[0]);
+	*val = (s16)le16_to_cpu(data->buffer[0]);
 
 	return IIO_VAL_INT;
 }

base-commit: 81983758430957d9a5cb3333fe324fd70cf63e7e

Signature · 1 line
2.47.0
author maintainer
#1 lore raw
Quoted 47 lines · Matti Vaittinen

The KX022A provides the accelerometer data in two subsequent registers. The registers are laid out so that the value obtained via bulk-read of these registers can be interpreted as signed 16-bit little endian value. The read value is converted to cpu_endianes and stored into 32bit integer. The le16_to_cpu() casts value to unsigned 16-bit value, and when this is assigned to 32-bit integer the resulting value will always be positive.

This has not been a problem to users (at least not all users) of the sysfs interface, who know the data format based on the scan info and who have converted the read value back to 16-bit signed value.

This, however, will be a problem for those who use the in-kernel interfaces, especially the iio_read_channel_processed_scale().

The iio_read_channel_processed_scale() performs multiplications to the returned (always positive) raw value, which will cause strange results when the data from the sensor has been negative.

Fix the read_raw format by casting the result of the le_to_cpu() to signed 16-bit value before assigning it to the integer. This will make the negative readings to be correctly reported as negative.

This fix will be visible to users by changing values returned via sysfs to appear in correct (negative) format.

Fixes 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
---
  drivers/iio/accel/kionix-kx022a.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/accel/kionix-kx022a.c +1 -1
index 53d59a04ae15..b6a828a6df93 100644
@@ -594,7 +594,7 @@ static int kx022a_get_axis(struct kx022a_data *data,
  	if (ret)
  		return ret;
 
-	*val = le16_to_cpu(data->buffer[0]);
+	*val = (s16)le16_to_cpu(data->buffer[0]);
 
  	return IIO_VAL_INT;
  }
Quoted 1 line

base-commit: 81983758430957d9a5cb3333fe324fd70cf63e7e

I should have CC's Mehdi who added the kx132-1211 support. Did so now - sorry for the noise.

Yours,
-- Matti

#2 lore raw
In reply to Matti Vaittinen
Quoted 10 lines · On Wed, 30 Oct 2024 15:16:11 +0200 Matti Vaittinen <[email protected]>…

The KX022A provides the accelerometer data in two subsequent registers. The registers are laid out so that the value obtained via bulk-read of these registers can be interpreted as signed 16-bit little endian value. The read value is converted to cpu_endianes and stored into 32bit integer. The le16_to_cpu() casts value to unsigned 16-bit value, and when this is assigned to 32-bit integer the resulting value will always be positive.

This has not been a problem to users (at least not all users) of the sysfs interface, who know the data format based on the scan info and who have converted the read value back to 16-bit signed value.

They shouldn't be doing that. Scaninfo is for buffered values only This should indeed be signed.

Quoted 28 lines

This, however, will be a problem for those who use the in-kernel interfaces, especially the iio_read_channel_processed_scale().

The iio_read_channel_processed_scale() performs multiplications to the returned (always positive) raw value, which will cause strange results when the data from the sensor has been negative.

Fix the read_raw format by casting the result of the le_to_cpu() to signed 16-bit value before assigning it to the integer. This will make the negative readings to be correctly reported as negative.

This fix will be visible to users by changing values returned via sysfs to appear in correct (negative) format.

Fixes 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
---
 drivers/iio/accel/kionix-kx022a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/accel/kionix-kx022a.c +0 -0
index 53d59a04ae15..b6a828a6df93 100644

drivers/iio/accel/kionix-kx022a.c static int kx022a_get_axis(struct kx022a_data *data, · line 597

Quoted 5 lines
drivers/iio/accel/kionix-kx022a.c +1 -1
@@ -594,7 +594,7 @@ static int kx022a_get_axis(struct kx022a_data *data,
 	if (ret)
 		return ret;
 
-	*val = le16_to_cpu(data->buffer[0]);
+	*val = (s16)le16_to_cpu(data->buffer[0]);

LGTM.

Quoted 5 lines
drivers/iio/accel/kionix-kx022a.c +0 -0
 	return IIO_VAL_INT;
 }
 

base-commit: 81983758430957d9a5cb3333fe324fd70cf63e7e

maintainer
#3 lore raw
Quoted 10 lines · On Wed, 30 Oct 2024 18:06:58 +0000 Jonathan Cameron…
Quoted 7 lines · On Wed, 30 Oct 2024 15:16:11 +0200 Matti Vaittinen <[email protected]>…

The KX022A provides the accelerometer data in two subsequent registers. The registers are laid out so that the value obtained via bulk-read of these registers can be interpreted as signed 16-bit little endian value. The read value is converted to cpu_endianes and stored into 32bit integer. The le16_to_cpu() casts value to unsigned 16-bit value, and when this is assigned to 32-bit integer the resulting value will always be positive.

Quoted 5 lines
Quoted 3 lines

This has not been a problem to users (at least not all users) of the sysfs interface, who know the data format based on the scan info and who have converted the read value back to 16-bit signed value.

They shouldn't be doing that. Scaninfo is for buffered values only This should indeed be signed.

I added a note saying this isn't compliant with the ABI. Applied to the fixes-togreg branch fo iio.git and marked for stable.

Quoted 41 lines
Quoted 29 lines

This, however, will be a problem for those who use the in-kernel interfaces, especially the iio_read_channel_processed_scale().

The iio_read_channel_processed_scale() performs multiplications to the returned (always positive) raw value, which will cause strange results when the data from the sensor has been negative.

Fix the read_raw format by casting the result of the le_to_cpu() to signed 16-bit value before assigning it to the integer. This will make the negative readings to be correctly reported as negative.

This fix will be visible to users by changing values returned via sysfs to appear in correct (negative) format.

Fixes 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
---
 drivers/iio/accel/kionix-kx022a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/accel/kionix-kx022a.c +0 -0
index 53d59a04ae15..b6a828a6df93 100644

drivers/iio/accel/kionix-kx022a.c static int kx022a_get_axis(struct kx022a_data *data, · line 597

Quoted 5 lines
drivers/iio/accel/kionix-kx022a.c +1 -1
@@ -594,7 +594,7 @@ static int kx022a_get_axis(struct kx022a_data *data,
 	if (ret)
 		return ret;
 
-	*val = le16_to_cpu(data->buffer[0]);
+	*val = (s16)le16_to_cpu(data->buffer[0]);  

LGTM.

Quoted 5 lines
drivers/iio/accel/kionix-kx022a.c +0 -0
 	return IIO_VAL_INT;
 }
 

base-commit: 81983758430957d9a5cb3333fe324fd70cf63e7e